def test_round_trip_from_run_engine(mds_all):
try:
import bluesky
except ImportError as ie:
raise pytest.skip('ImportError: {0}'.format(ie))
# generate a new specfile
from bluesky.tests.utils import setup_test_run_engine
from bluesky.examples import motor, det, motor1
from bluesky.global_state import gs
from bluesky.spec_api import dscan, ascan, ct, a2scan
RE = setup_test_run_engine()
fname = tempfile.NamedTemporaryFile().name
cb = spec.DocumentToSpec(fname)
RE.subscribe('all', cb)
gs.DETS = [det]
RE(dscan(motor, -1, 1, 10))
RE(ascan(motor, -1, 1, 10))
# add count to hit some lines in
# suitcase.spec:_get_motor_name
# suitcase.spec:_get_motor_position
# suitcase.spec:_get_plan_type
RE(ct())
RE(a2scan(motor, -1, 1, motor1, -1, 1, 10))
sf = spec.Specfile(fname)
sf1 = _round_trip(sf, mds_all)
# a2scan is not round trippable
num_unconvertable_scans = 1
assert len(sf) == (len(sf1) + num_unconvertable_scans)
def test_basic_usage():
try:
import metadatastore
except ImportError:
raise nose.SkipTest
from bluesky.global_state import gs
from bluesky.spec_api import (ct, ascan, a2scan, a3scan, dscan, d2scan,
d3scan, mesh, tscan, dtscan, th2th)
gs.DETS = [det]
with assert_raises(TraitError):
gs.DETS = [det, det] # no duplicate data keys
gs.TEMP_CONTROLLER = motor
gs.TH_MOTOR = motor1
gs.TTH_MOTOR = motor2
gs.RE.md['owner'] = 'test'
gs.RE.md['group'] = 'test'
gs.RE.md['beamline_id'] = 'test'
gs.RE.md['config'] = {}
# without count time specified
ct()
ct(num=3) # passing kwargs through to scan
ascan(motor, 1, 2, 2)
a2scan(motor, 1, 2, 2)
a3scan(motor, 1, 2, 2)
dscan(motor, 1, 2, 2)
d2scan(motor, 1, 2, 2)
d3scan(motor, 1, 2, 2)
mesh(motor1, 1, 2, 2, motor2, 1, 2, 3)
tscan(1, 2, 2)
dtscan(1, 2, 2)
th2th(1, 2, 2)
# with count time specified as positional arg
ct()
ascan(motor, 1, 2, 2, 0.1)
a2scan(motor, 1, 2, 2, 0.1)
a3scan(motor, 1, 2, 2, 0.1)
dscan(motor, 1, 2, 2, 0.1)
d2scan(motor, 1, 2, 2, 0.1)
d3scan(motor, 1, 2, 2, 0.1)
mesh(motor1, 1, 2, 2, motor2, 1, 2, 3, 0.1)
tscan(1, 2, 2, 0.1)
dtscan(1, 2, 2, 0.1)
th2th(1, 2, 2, 0.1)
# with count time specified as keyword arg
ct()
ascan(motor, 1, 2, 2, time=0.1)
a2scan(motor, 1, 2, 2, time=0.1)
a3scan(motor, 1, 2, 2, time=0.1)
dscan(motor, 1, 2, 2, time=0.1)
d2scan(motor, 1, 2, 2, time=0.1)
d3scan(motor, 1, 2, 2, time=0.1)
mesh(motor1, 1, 2, 2, motor2, 1, 2, 3, time=0.1)
tscan(1, 2, 2, time=0.1)
dtscan(1, 2, 2, time=0.1)
th2th(1, 2, 2, time=0.1)
flyer = FlyMagic('wheee', motor, det1, det2)
gs.FLYERS = [flyer]
ct()
def test_basic_usage():
try:
import metadatastore
except ImportError:
raise nose.SkipTest
from bluesky.global_state import gs
from bluesky.spec_api import (ct, ascan, a2scan, a3scan, dscan, d2scan,
d3scan, mesh, tscan, dtscan, th2th)
gs.DETS = [det]
with assert_raises(TraitError):
gs.DETS = [det, det] # no duplicate data keys
gs.TEMP_CONTROLLER = motor
gs.TH_MOTOR = motor1
gs.TTH_MOTOR = motor2
gs.RE.md['owner'] = 'test'
gs.RE.md['group'] = 'test'
gs.RE.md['beamline_id'] = 'test'
gs.RE.md['config'] = {}
# without count time specified
ct()
ct(num=3) # passing kwargs through to scan
ascan(motor, 1, 2, 2)
a2scan(motor, 1, 2, 2)
a3scan(motor, 1, 2, 2)
dscan(motor, 1, 2, 2)
d2scan(motor, 1, 2, 2)
d3scan(motor, 1, 2, 2)
mesh(motor1, 1, 2, 2, motor2, 1, 2, 3)
tscan(1, 2, 2)
dtscan(1, 2, 2)
th2th(1, 2, 2)
# with count time specified as positional arg
ct()
ascan(motor, 1, 2, 2, 0.1)
a2scan(motor, 1, 2, 2, 0.1)
a3scan(motor, 1, 2, 2, 0.1)
dscan(motor, 1, 2, 2, 0.1)
d2scan(motor, 1, 2, 2, 0.1)
d3scan(motor, 1, 2, 2, 0.1)
mesh(motor1, 1, 2, 2, motor2, 1, 2, 3, 0.1)
tscan(1, 2, 2, 0.1)
dtscan(1, 2, 2, 0.1)
th2th(1, 2, 2, 0.1)
# with count time specified as keyword arg
ct()
ascan(motor, 1, 2, 2, time=0.1)
a2scan(motor, 1, 2, 2, time=0.1)
a3scan(motor, 1, 2, 2, time=0.1)
dscan(motor, 1, 2, 2, time=0.1)
d2scan(motor, 1, 2, 2, time=0.1)
d3scan(motor, 1, 2, 2, time=0.1)
mesh(motor1, 1, 2, 2, motor2, 1, 2, 3, time=0.1)
tscan(1, 2, 2, time=0.1)
dtscan(1, 2, 2, time=0.1)
th2th(1, 2, 2, time=0.1)
def test_basic_usage():
gs.DETS = [det]
with assert_raises(TraitError):
gs.DETS = [det, det] # no duplicate data keys
gs.TEMP_CONTROLLER = motor
gs.TH_MOTOR = motor1
gs.TTH_MOTOR = motor2
gs.RE.md["group"] = "test"
gs.RE.md["beamline_id"] = "test"
gs.RE.md["config"] = {}
# without count time specified
ct()
ascan(motor, 1, 2, 2)
a2scan(motor, 1, 2, 2)
a3scan(motor, 1, 2, 2)
dscan(motor, 1, 2, 2)
d2scan(motor, 1, 2, 2)
d3scan(motor, 1, 2, 2)
mesh(motor1, 1, 2, 2, motor2, 1, 2, 3)
tscan(1, 2, 2)
dtscan(1, 2, 2)
th2th(1, 2, 2)
# with count time specified as positional arg
ct()
ascan(motor, 1, 2, 2, 0.1)
a2scan(motor, 1, 2, 2, 0.1)
a3scan(motor, 1, 2, 2, 0.1)
dscan(motor, 1, 2, 2, 0.1)
d2scan(motor, 1, 2, 2, 0.1)
d3scan(motor, 1, 2, 2, 0.1)
mesh(motor1, 1, 2, 2, motor2, 1, 2, 3, 0.1)
tscan(1, 2, 2, 0.1)
dtscan(1, 2, 2, 0.1)
th2th(1, 2, 2, 0.1)
# with count time specified as keyword arg
ct()
ascan(motor, 1, 2, 2, time=0.1)
a2scan(motor, 1, 2, 2, time=0.1)
a3scan(motor, 1, 2, 2, time=0.1)
dscan(motor, 1, 2, 2, time=0.1)
d2scan(motor, 1, 2, 2, time=0.1)
d3scan(motor, 1, 2, 2, time=0.1)
mesh(motor1, 1, 2, 2, motor2, 1, 2, 3, time=0.1)
tscan(1, 2, 2, time=0.1)
dtscan(1, 2, 2, time=0.1)
th2th(1, 2, 2, time=0.1)
def test_basic_usage():
gs.DETS = [det]
with assert_raises(TraitError):
gs.DETS = [det, det] # no duplicate data keys
gs.TEMP_CONTROLLER = motor
gs.TH_MOTOR = motor1
gs.TTH_MOTOR = motor2
gs.RE.md['group'] = 'test'
gs.RE.md['beamline_id'] = 'test'
gs.RE.md['config'] = {}
# without count time specified
ct()
ascan(motor, 1, 2, 2)
a2scan(motor, 1, 2, 2)
a3scan(motor, 1, 2, 2)
dscan(motor, 1, 2, 2)
d2scan(motor, 1, 2, 2)
d3scan(motor, 1, 2, 2)
mesh(motor1, 1, 2, 2, motor2, 1, 2, 3)
tscan(1, 2, 2)
dtscan(1, 2, 2)
th2th(1, 2, 2)
# with count time specified as positional arg
ct()
ascan(motor, 1, 2, 2, 0.1)
a2scan(motor, 1, 2, 2, 0.1)
a3scan(motor, 1, 2, 2, 0.1)
dscan(motor, 1, 2, 2, 0.1)
d2scan(motor, 1, 2, 2, 0.1)
d3scan(motor, 1, 2, 2, 0.1)
mesh(motor1, 1, 2, 2, motor2, 1, 2, 3, 0.1)
tscan(1, 2, 2, 0.1)
dtscan(1, 2, 2, 0.1)
th2th(1, 2, 2, 0.1)
# with count time specified as keyword arg
ct()
ascan(motor, 1, 2, 2, time=0.1)
a2scan(motor, 1, 2, 2, time=0.1)
a3scan(motor, 1, 2, 2, time=0.1)
dscan(motor, 1, 2, 2, time=0.1)
d2scan(motor, 1, 2, 2, time=0.1)
d3scan(motor, 1, 2, 2, time=0.1)
mesh(motor1, 1, 2, 2, motor2, 1, 2, 3, time=0.1)
tscan(1, 2, 2, time=0.1)
dtscan(1, 2, 2, time=0.1)
th2th(1, 2, 2, time=0.1)
def test_basic_usage():
gs.DETS = [det]
gs.TEMP_CONTROLLER = motor
gs.TH_MOTOR = motor1
gs.TTH_MOTOR = motor2
gs.RE.md['group'] = 'test'
gs.RE.md['beamline_id'] = 'test'
gs.RE.md['config'] = {}
# without count time specified
ct()
ascan(motor, 1, 2, 2)
a2scan(motor, 1, 2, 2)
a3scan(motor, 1, 2, 2)
dscan(motor, 1, 2, 2)
d2scan(motor, 1, 2, 2)
d3scan(motor, 1, 2, 2)
mesh(motor1, 1, 2, 2, motor2, 1, 2, 3)
tscan(1, 2, 2)
dtscan(1, 2, 2)
th2th(1, 2, 2)
# with count time specified as positional arg
ct()
ascan(motor, 1, 2, 2, 0.1)
a2scan(motor, 1, 2, 2, 0.1)
a3scan(motor, 1, 2, 2, 0.1)
dscan(motor, 1, 2, 2, 0.1)
d2scan(motor, 1, 2, 2, 0.1)
d3scan(motor, 1, 2, 2, 0.1)
mesh(motor1, 1, 2, 2, motor2, 1, 2, 3, 0.1)
tscan(1, 2, 2, 0.1)
dtscan(1, 2, 2, 0.1)
th2th(1, 2, 2, 0.1)
# with count time specified as keyword arg
ct()
ascan(motor, 1, 2, 2, time=0.1)
a2scan(motor, 1, 2, 2, time=0.1)
a3scan(motor, 1, 2, 2, time=0.1)
dscan(motor, 1, 2, 2, time=0.1)
d2scan(motor, 1, 2, 2, time=0.1)
d3scan(motor, 1, 2, 2, time=0.1)
mesh(motor1, 1, 2, 2, motor2, 1, 2, 3, time=0.1)
tscan(1, 2, 2, time=0.1)
dtscan(1, 2, 2, time=0.1)
th2th(1, 2, 2, time=0.1)