async def async_init(self):
"""Init async items in entry."""
import bosch_thermostat_http as bosch
self._update_lock = asyncio.Lock()
self.gateway = bosch.Gateway(self.websession, self.address,
self.access_key)
if await self.async_init_bosch():
self.hass.helpers.dispatcher.async_dispatcher_connect(
SIGNAL_BOSCH, self.get_signals)
for component in self.supported_platforms:
if component == SOLAR:
continue
self.hass.async_create_task(
self.hass.config_entries.async_forward_entry_setup(
self.entry, component))
device_registry = (
await self.hass.helpers.device_registry.async_get_registry())
device_registry.async_get_or_create(
config_entry_id=self.entry.entry_id,
identifiers={(DOMAIN, self.uuid)},
manufacturer=self.gateway.get_info(SYSTEM_BRAND),
model=self.gateway.get_info(SYSTEM_TYPE),
name=self.gateway.device_name,
sw_version=self.gateway.firmware,
)
if GATEWAY in self.hass.data[DOMAIN][self.uuid]:
self.register_service(True, False)
_LOGGER.debug(
"Bosch component registered with platforms %s.",
self.supported_platforms,
)
return True
return False
async def main():
"""
Provide data_file.txt with ip, access_key, password and check
if you can retrieve data from your thermostat.
"""
async with aiohttp.ClientSession() as session:
data_file = open("data_file.txt", "r")
data = data_file.read().splitlines()
gateway = bosch.Gateway(session,
host=data[0],
access_key=data[1],
password=data[2])
print(await gateway.check_connection())
#await gateway.initialize_circuits(DHW)
#await gateway.initialize_circuits(HC)
#dhws = gateway.dhw_circuits
#dhw = dhws[0]
#print("getting property")
#print(dhw.get_property(DHW_OFFTEMP_LEVEL))
#await dhw.update()
#print(dhw.get_property(DHW_OFFTEMP_LEVEL))
# await hc.set_operation_mode("manual")
await gateway.set_value("/heatingCircuits/hc1/suWiSwitchMode",
"forced")
#time.sleep(5)
print(await gateway.get("/heatingCircuits/hc1/currentSuWiMode"))
print(await gateway.get("/heatingCircuits/hc1/suWiSwitchMode"))
#print(await gateway.get("/heatingCircuits/hc1/currentRoomSetpoint"))
#await gateway.set_value("/heatingCircuits/hc1/manualRoomSetpoint", 22.0)
#time.sleep(3)
#print(await gateway.get("/heatingCircuits/hc1/currentRoomSetpoint"))
#print(await gateway.get("/heatingCircuits/hc1/operationMode"))
await session.close()
async def main():
"""
Provide data_file.txt with ip, access_key, password and check
if you can retrieve data from your thermostat.
"""
async with aiohttp.ClientSession() as session:
data_file = open("data_file_ka.txt", "r")
data = data_file.read().splitlines()
gateway = bosch.Gateway(session, host=data[0], access_key=data[1])
await gateway.check_connection()
print(gateway.firmware)
print(gateway.device_name)
await gateway.initialize_circuits(HC)
hcs = gateway.heating_circuits
hc = hcs[1]
time.sleep(1)
await hc.update()
# print(hc.hvac_modes)
# print(hc.hvac_mode)
# print(hc.target_temperature)
await hc.set_hvac_mode("auto")
# await hc.update()
# print(hc.hvac_mode)
# await hc.set_temperature(21)
# await hc.update()
print(hc.target_temperature)
# print(hc.schedule.get_temp_for_date(gateway.get_info(DATE)))
smallscan = await gateway.smallscan()
to_file = "kamika_raw_small.json"
with open(to_file, 'w') as logfile:
json.dump(smallscan, logfile, indent=4)
return
aa = 0
while aa < 10:
time.sleep(1)
await hc.update()
print(hc.target_temperature)
aa = aa + 1
await hc.set_operation_mode("auto")
aa = 0
while aa < 10:
time.sleep(1)
await hc.update()
print(hc.target_temperature)
aa = aa + 1
# print(gateway.get_property(TYPE_INFO, UUID))
await session.close()
async def main():
"""
Provide data_file.txt with ip, access_key, password and check
if you can retrieve data from your thermostat.
"""
async with aiohttp.ClientSession() as session:
data_file = open("data_file.txt", "r")
data = data_file.read().splitlines()
gateway = bosch.Gateway(session=session,
host=data[0],
access_key=data[1],
password=data[2])
print(await gateway.check_connection())
sensors = bosch_sensors(gateway.get_info(FIRMWARE_VERSION))
print(sensors)
await gateway.initialize_sensors(sensors)
print(gateway.sensors)
#
# await gateway.rawscan()
await session.close()
async def dhw(ctx, ip: str, token: str, password: str, debug: int,
target_temp: int, op_mode: int, op_modes: int, setpoints: int):
if debug:
logging.basicConfig(level=logging.DEBUG)
_LOGGER.info("Debug mode active")
_LOGGER.debug(f"Lib version is {bosch.version.__version__}")
else:
logging.basicConfig(level=logging.INFO)
async with aiohttp.ClientSession() as session:
gateway = bosch.Gateway(session=session,
host=ip,
access_key=token,
password=password)
_LOGGER.debug("Trying to connect to gateway.")
if await gateway.check_connection():
_LOGGER.info("Successfully connected to gateway. Found UUID: %s",
gateway.uuid)
await circuit_fetch(gateway, DHW, target_temp, op_mode, op_modes,
setpoints)
else:
_LOGGER.error("Couldn't connect to gateway!")
await session.close()
async def cli(ctx, ip: str, token: str, password: str, output: str,
stdout: int, debug: int, smallscan: str):
"""A tool to create rawscan of Bosch thermostat."""
if debug:
logging.basicConfig(level=logging.DEBUG)
_LOGGER.info("Debug mode active")
_LOGGER.debug(f"Lib version is {bosch.version.__version__}")
else:
logging.basicConfig(level=logging.INFO)
async with aiohttp.ClientSession() as session:
_LOGGER.debug("Connecting to %s with token '%s' and password '%s'", ip,
token, password)
gateway = bosch.Gateway(session=session,
host=ip,
access_key=token,
password=password)
_LOGGER.debug("Trying to connect to gateway.")
if await gateway.check_connection():
_LOGGER.info("Successfully connected to gateway. Found UUID: %s",
gateway.uuid)
if smallscan:
result = await gateway.smallscan(smallscan)
out_file = output if output else f"smallscan_{gateway.uuid}.json"
else:
result = await gateway.rawscan()
out_file = output if output else f"rawscan_{gateway.uuid}.json"
if stdout:
print(json.dumps(result, indent=4))
else:
with open(out_file, "w") as logfile:
json.dump(result, logfile, indent=4)
_LOGGER.info("Successfully saved result to file: %s",
out_file)
_LOGGER.debug("Job done.")
else:
_LOGGER.error("Couldn't connect to gateway!")
await session.close()
async def sensors(ctx, ip: str, token: str, password: str, debug: int, sensor):
if debug:
logging.basicConfig(level=logging.DEBUG)
_LOGGER.info("Debug mode active")
_LOGGER.debug(f"Lib version is {bosch.version.__version__}")
else:
logging.basicConfig(level=logging.INFO)
async with aiohttp.ClientSession() as session:
gateway = bosch.Gateway(session=session,
host=ip,
access_key=token,
password=password)
_LOGGER.debug("Trying to connect to gateway.")
if await gateway.check_connection():
_LOGGER.info("Successfully connected to gateway. Found UUID: %s",
gateway.uuid)
sensors = gateway.initialize_sensors(list(sensor))
for sensor_obj in sensors:
await sensor_obj.update()
print(sensor_obj.name, ":",
sensor_obj.get_property(sensor_obj.attr_id))
else:
_LOGGER.error("Couldn't connect to gateway!")
await session.close()
async def async_setup_entry(hass: HomeAssistantType, entry: ConfigEntry):
"""Create entry for Bosch thermostat device."""
import bosch_thermostat_http as bosch
_LOGGER.debug("Setting up Bosch component.")
SUPPORTED_PLATFORMS = []
websession = async_get_clientsession(hass, verify_ssl=False)
uuid = entry.title
if entry.data[CONF_ADDRESS] and entry.data[ACCESS_KEY]:
gateway = bosch.Gateway(websession, entry.data[CONF_ADDRESS],
entry.data[ACCESS_KEY])
store = hass.helpers.storage.Store(STORAGE_VERSION, STORAGE_KEY)
prefs = await store.async_load()
_LOGGER.debug("Checking connection to Bosch gateway.")
if not await gateway.check_connection():
_LOGGER.error(
"Cannot connect to Bosch gateway, host %s with UUID: %s",
entry.data[CONF_ADDRESS], uuid)
return False
current_firmware = gateway.get_info(FIRMWARE_VERSION)
if prefs is None:
prefs = {uuid: {"uuid": uuid, FIRMWARE_VERSION: current_firmware}}
hcs, need_saving1 = (await
initialize_component(HC, uuid, prefs[uuid],
gateway))
if hcs:
SUPPORTED_PLATFORMS.append(CLIMATE)
prefs[uuid] = hcs
water_heaters, need_saving2 = (await initialize_component(
DHW, uuid, prefs[uuid], gateway))
if water_heaters:
SUPPORTED_PLATFORMS.append(WATER_HEATER)
# This is HCS and water heater object.
prefs[uuid] = water_heaters
sensors, need_saving3 = (await initialize_component(
"sensors", uuid, bosch_sensors(current_firmware), gateway))
if sensors:
SUPPORTED_PLATFORMS.append(SENSOR)
hass.data[DOMAIN][uuid] = {GATEWAY: gateway}
if need_saving1 or need_saving2:
await store.async_save(prefs)
for component in SUPPORTED_PLATFORMS:
hass.async_create_task(
hass.config_entries.async_forward_entry_setup(
entry, component))
device_registry = (await
hass.helpers.device_registry.async_get_registry())
device_registry.async_get_or_create(
config_entry_id=entry.entry_id,
identifiers={(DOMAIN, uuid)},
manufacturer=gateway.get_info(SYSTEM_BRAND),
model=gateway.get_info(SYSTEM_TYPE),
name="Gateway iCom_Low_NSC_v1",
sw_version=current_firmware)
_LOGGER.debug("Bosch component registered.")
async def thermostat_refresh(event_time):
"""Call Bosch to refresh information."""
_LOGGER.debug("Updating Bosch thermostat entitites.")
data = hass.data[DOMAIN][uuid]
updated = False
if CLIMATE in SUPPORTED_PLATFORMS:
await circuit_update(data['hcs'], HCS_UPDATE_KEYS)
dispatcher_send(hass, SIGNAL_CLIMATE_UPDATE_BOSCH)
updated = True
if WATER_HEATER in SUPPORTED_PLATFORMS:
await circuit_update(data['dhws'], DHW_UPDATE_KEYS)
dispatcher_send(hass, SIGNAL_DHW_UPDATE_BOSCH)
updated = True
if SENSOR in SUPPORTED_PLATFORMS:
await sensors_update(data['sensors'])
dispatcher_send(hass, SIGNAL_SENSOR_UPDATE_BOSCH)
updated = True
if updated:
_LOGGER.debug("Bosch thermostat entitites updated.")
async def async_handle_debug_service(service_call):
filename = hass.config.path("www/bosch_scan.json")
def _write_to_filr(to_file, rawscan):
"""Executor helper to write image."""
with open(to_file, 'w') as logfile:
json.dump(rawscan, logfile, indent=4)
url = "{}{}".format(hass.config.api.base_url,
"/local/bosch_scan.json")
_LOGGER.info("Rawscan success. Your URL: {}?v{}".format(
url, random.randint(0, 5000)))
try:
_LOGGER.info("Starting rawscan of Bosch component")
rawscan = await gateway.rawscan()
await hass.async_add_executor_job(_write_to_filr, filename,
rawscan)
except OSError as err:
_LOGGER.error("Can't write image to file: %s", err)
# hass.services.register(DOMAIN, 'update', thermostat_refresh)
hass.services.async_register(DOMAIN, SERVICE_DEBUG,
async_handle_debug_service,
SERVICE_DEBUG_SCHEMA)
# Repeat running every 30 seconds.
async_track_time_interval(hass, thermostat_refresh, SCAN_INTERVAL)
return True
async def main():
"""
Provide data_file.txt with ip, access_key, password and check
if you can retrieve data from your thermostat.
"""
async with aiohttp.ClientSession() as session:
data_file = open("data_file.txt", "r")
data = data_file.read().splitlines()
gateway = bosch.Gateway(session,
host=data[0],
access_key=data[1],
password=data[2])
print(await gateway.check_connection())
# return
await gateway.initialize_circuits(DHW)
# small = await gateway.smallscan(DHW_CIRCUITS)
# myjson = json.loads(small)
# print(small)
# return
# sensors = gateway.initialize_sensors()
# for sensor in sensors:
# await sensor.update()
dhws = gateway.dhw_circuits
dhw = dhws[0]
time.sleep(1)
await dhw.update()
# await hc.set_ha_mode("auto") #MEANS AUTO
# await hc.update()
# time.sleep(4)
print("hvac mode", dhw.ha_mode)
print("target temp ->", dhw.target_temperature)
await dhw.set_temperature(53.0)
# return
# return
# await dhw.set_ha_mode("performance") #MEANS MANUAL
return
# print("target in manual", hc.target_temperature)
# print("ha mode in manual", hc.ha_mode)
# await hc.update()
# print("target after update", hc.target_temperature)
# print("ha mode", hc.ha_mode)
# await hc.set_ha_mode("auto") #MEANS AUTO
# print("target after auto without update", hc.target_temperature)
# print("ha mode", hc.ha_mode)
# return
# print(await hc.set_temperature(10.0))
# print("ustawiona!")
dhws = gateway.dhw_circuits
dhw = dhws[0]
await dhw.update()
print("START1")
print(dhw.target_temperature)
print("START2")
print(dhw.current_mode)
print(dhw.target_temperature)
return
print("START3")
print(dhw.target_temperature)
return
# print(hc.schedule)
print(gateway.get_info(DATE))
# print(await gateway.rawscan())
#print(hc.schedule.get_temp_for_date(gateway.get_info(DATE)))
return
aa = 0
while aa < 10:
time.sleep(1)
await hc.update()
print(hc.target_temperature)
aa = aa + 1
await hc.set_operation_mode("auto")
aa = 0
while aa < 10:
time.sleep(1)
await hc.update()
print(hc.target_temperature)
aa = aa + 1
# print(gateway.get_property(TYPE_INFO, UUID))
await session.close()