def learn_command(ip_address, command_name, host_ip):
broadcast_address = "255.255.255.255"
if host_ip == 'localhost':
host_ip = None
else:
broadcast_address = host_ip[:host_ip.rfind('.') + 1] + '255'
print(f'broadcast ip is: {broadcast_address}')
parser = argparse.ArgumentParser(fromfile_prefix_chars='@')
parser.add_argument(
"--timeout",
type=int,
default=2,
help="timeout to wait for receiving discovery responses")
parser.add_argument("--ip",
default=host_ip,
help="ip address to use in the discovery")
parser.add_argument("--dst-ip",
default=broadcast_address,
help="destination ip address to use in the discovery")
args = parser.parse_args()
print("Discovering...")
devices = broadlink.discover(timeout=args.timeout,
local_ip_address=args.ip,
discover_ip_address=args.dst_ip)
for device in devices:
if device.auth():
if device.host[0] == ip_address:
# found a match
print("###########################################")
print('Found a match')
print("# broadlink_cli --type {} --host {} --mac {}".format(
hex(device.devtype), device.host[0],
''.join(format(x, '02x') for x in device.mac)))
device.enter_learning()
print("Learning...")
start = time.time()
while time.time() - start < TIMEOUT:
time.sleep(1)
try:
data = device.check_data()
except (ReadError, StorageError):
continue
else:
break
else:
print("No data received...")
# TODO handle better
return Exception('No data received...')
# exit(1)
learned = format_durations(to_microseconds(bytearray(data)))
learned = ''.join(format(x, '02x') for x in bytearray(data))
# if durations \
# somerthing = ''.join(format(x, '02x') for x in bytearray(data))
print("###########################################")
print("Learned!")
print(learned)
# we need to find the device and add a command that we just learned
mac_address = ''.join(format(x, '02x') for x in device.mac)
file_name = mac_address + '.json'
script_dir = os.path.dirname(__file__)
file_path = os.path.join(script_dir, './config/')
file_with_path = file_path + file_name
if os.path.exists(file_with_path):
# we need to merge
print('File exists')
with open(file_with_path) as existing_file:
data = json.load(existing_file)
if data and data['mac']:
my_device = {
"ip":
device.host[0],
"mac":
':'.join(
mac_address[i:i + 2]
for i in range(0, len(mac_address), 2)),
"model":
device.model,
"manufacturer":
device.manufacturer,
"commands": [{
"id": str(uuid.uuid4()),
"name": command_name,
"data": learned
}],
"name":
data['name'],
"temperature":
data['temperature'],
"humidity":
data['humidity']
}
# we have a mac address in the file, should be a valid file
# merge new data into old
merged_device = always_merger.merge(
my_device, data)
write_json_file(file_with_path, merged_device)
return merged_device
else:
# not a vlid mac, we need to just write data
print('Not a valid mac address')
else:
print("Error authenticating with device : {}".format(device.host))
def discover_blasters(timeout):
return list(
filter(lambda blaster: blaster.get_type().lower() == "rm2",
broadlink.discover(timeout=timeout)))
import broadlink
import ipdb
from my_credits import (
WIFI_SSID,
WIFI_PASSWORD,
WIFI_SECIRITY_MODE,
)
from commands import (
SAMSUNG_TV_POWER,
SAMSUNG_TV_ADD_SOUND,
SAMSUNG_TV_REDUCE_SOUND,
SUMSUNG_TV_NEXT_CNANNEL,
SUMSUNG_TV_PREVIOUS_CNANNEL,
)
broadlink.setup(WIFI_SSID, WIFI_PASSWORD, WIFI_SECIRITY_MODE)
try:
print(f"Broadlink {WIFI_SSID} {WIFI_PASSWORD} {WIFI_SECIRITY_MODE}")
device = broadlink.discover(timeout=10)[0]
device.auth()
except IndexError:
print("Broadlink is turned off")
ipdb.set_trace()
def output():
devices = broadlink.discover(timeout=10)
print(devices)
return "ho gaya"
def get_device(cf):
device_type = cf.get('device_type', 'lookup')
if device_type == 'lookup':
local_address = cf.get('local_address', None)
lookup_timeout = cf.get('lookup_timeout', 20)
devices = broadlink.discover(timeout=lookup_timeout) if local_address is None else \
broadlink.discover(timeout=lookup_timeout, local_ip_address=local_address)
if len(devices) == 0:
logging.error('No Broadlink device found')
sys.exit(2)
if len(devices) > 1:
logging.error('More than one Broadlink device found (' +
', '.join([
d.type + '/' + d.host[0] + '/' +
':'.join(format(s, '02x') for s in d.mac[::-1])
for d in devices
]) + ')')
sys.exit(2)
return configure_device(devices[0], topic_prefix)
elif device_type == 'multiple_lookup':
local_address = cf.get('local_address', None)
lookup_timeout = cf.get('lookup_timeout', 20)
devices = broadlink.discover(timeout=lookup_timeout) if local_address is None else \
broadlink.discover(timeout=lookup_timeout, local_ip_address=local_address)
if len(devices) == 0:
logging.error('No Broadlink devices found')
sys.exit(2)
mqtt_multiple_prefix_format = cf.get('mqtt_multiple_subprefix_format',
None)
devices_dict = {}
for device in devices:
mqtt_subprefix = mqtt_multiple_prefix_format.format(
type=device.type,
host=device.host[0],
mac='_'.join(format(s, '02x') for s in device.mac[::-1]),
mac_nic='_'.join(format(s, '02x') for s in device.mac[2::-1]))
device = configure_device(device, topic_prefix + mqtt_subprefix)
devices_dict[mqtt_subprefix] = device
return devices_dict
elif device_type == 'test':
return configure_device(TestDevice(cf), topic_prefix)
else:
host = (cf.get('device_host'), 80)
mac = bytearray.fromhex(cf.get('device_mac').replace(':', ' '))
if device_type == 'rm':
device = broadlink.rm(host=host, mac=mac, devtype=0x2712)
elif device_type == 'rm4':
device = broadlink.rm4(host=host, mac=mac, devtype=0x51da)
elif device_type == 'sp1':
device = broadlink.sp1(host=host, mac=mac, devtype=0)
elif device_type == 'sp2':
device = broadlink.sp2(host=host, mac=mac, devtype=0x2711)
elif device_type == 'a1':
device = broadlink.a1(host=host, mac=mac, devtype=0x2714)
elif device_type == 'mp1':
device = broadlink.mp1(host=host, mac=mac, devtype=0x4EB5)
elif device_type == 'dooya':
device = broadlink.dooya(host=host, mac=mac, devtype=0x4E4D)
elif device_type == 'bg1':
device = broadlink.bg1(host=host, mac=mac, devtype=0x51E3)
else:
logging.error('Incorrect device configured: ' + device_type)
sys.exit(2)
return configure_device(device, topic_prefix)
def discover_devices(host_ip):
broadcast_address = "255.255.255.255"
if host_ip == 'localhost':
host_ip = None
else:
broadcast_address = host_ip[:host_ip.rfind('.') + 1] + '255'
print(f'broadcast ip is: {broadcast_address}')
device_list = []
parser = argparse.ArgumentParser(fromfile_prefix_chars='@')
parser.add_argument(
"--timeout",
type=int,
default=2,
help="timeout to wait for receiving discovery responses")
parser.add_argument("--ip",
default=host_ip,
help="ip address to use in the discovery")
parser.add_argument("--dst-ip",
default=broadcast_address,
help="destination ip address to use in the discovery")
args = parser.parse_args()
print(f'args: {args}')
print("Discovering...")
devices = broadlink.discover(timeout=args.timeout,
local_ip_address=args.ip,
discover_ip_address=args.dst_ip)
print(f'devices {devices}')
for device in devices:
print(f'found {devices}')
if device.auth():
# devices.append(device)
temperature = None
humidity = None
print("###########################################")
print(device.type)
print("# broadlink_cli --type {} --host {} --mac {}".format(
hex(device.devtype), device.host[0],
''.join(format(x, '02x') for x in device.mac)))
print(
"Device file data (to be used with --device @filename in broadlink_cli) : "
)
try:
print("sensors = {}".format(device.check_sensors()))
sensors = device.check_sensors()
if sensors:
temperature = sensors['temperature']
humidity = sensors['humidity']
except (AttributeError, StorageError):
pass
print("")
mac_address = ''.join(format(x, '02x') for x in device.mac)
my_device = {
"ip":
device.host[0],
"mac":
':'.join(mac_address[i:i + 2]
for i in range(0, len(mac_address), 2)),
"model":
device.model,
"manufacturer":
device.manufacturer,
"commands": [],
"name":
'',
}
file_name = mac_address + '.json'
script_dir = os.path.dirname(__file__)
file_path = os.path.join(script_dir, './config/')
file_with_path = file_path + file_name
if os.path.exists(file_with_path):
# we need to merge
# this is so ugly
print('File exists, need to merge')
with open(file_with_path) as existing_file:
data = json.load(existing_file)
if data and data['mac']:
# we have a mac address in the file, should be a valid file
# merge new data into old
my_device = {
"ip":
device.host[0],
"mac":
':'.join(mac_address[i:i + 2]
for i in range(0, len(mac_address), 2)),
"model":
device.model,
"manufacturer":
device.manufacturer,
"commands":
data['commands'] or [],
"name":
data['name'] or '',
"temperature":
temperature,
"humidity":
humidity
}
device_list.append(my_device)
merged_device = always_merger.merge(data, my_device)
unique_commands = []
for i in range(len(my_device['commands'])):
if my_device['commands'][i] not in my_device[
'commands'][i + 1:]:
unique_commands.append(
my_device['commands'][i])
merged_device['commands'] = unique_commands
write_json_file(file_with_path, merged_device)
else:
# not a vlid mac, we need to just write data
write_json_file(file_with_path, my_device)
else:
# just write
print('File does not exist, creating')
write_json_file(file_with_path, my_device)
device_list.append(my_device)
else:
print("Error authenticating with device : {}".format(device.host))
return device_list
def discover_blasters(timeout):
return [
blaster
for blaster in broadlink.discover(timeout=timeout)
if blaster.get_type().lower() in ("rm2", "rm4")
]
def _get_broadlink_devices(self):
self.devices = broadlink.discover(timeout=7)
print(self.devices)
for d in self.devices:
d.auth()
decode_hex = codecs.getdecoder("hex_codec")
return str(base64.b64encode(decode_hex(learned)[0]))[2:-1] + "=="
# Gemnerate list of commands. This way the command learning logic doesnt have to be in nested loops.
# It also allows easy acess to the next command before the next loop iteration improving user experience.
# It will also make it easier to add preset modes support to the JSON file later.
def gen_cmd_list(data, mode_types, header_simple_cmds=["off"], footer_simple_cmds=[]):
return header_simple_cmds + [dict(zip(mode_types, cmd)) for cmd in product(*data)] + footer_simple_cmds
def gen_cmd_desc(cmd):
return " ".join([f"{name}: {value};" for name, value in cmd.items()])
while len(devices := broadlink.discover(timeout=5, discover_ip_address=input("broadlink controller IP adress: "))) < 1:
while (cont := input("No device found. Do you wish to try again?(y/n)").lower()) not in {"y", "yes", "n", "no"}:
print("Invalid Answer")
if cont.lower() in {"n", "no"}:
sys.exit()
device = devices[0]
if device.is_locked:
print("Device is locked please unlock it using broadlink app")
sys.exit()
if not device.auth():
print("Error authenticating with device")
sys.exit()
host = device.host[0]
print(f"Connected to {host}")
list_m("\nTool Modes", ["Create new codes file", "Add swing to existing file"])
async def rmmini_discovery():
devices = broadlink.discover(timeout=10)
devicetype = int(config['rmmini3']['type'], 0)
host = config['rmmini3']['rm_ip']
mac = bytearray.fromhex(config['rmmini3']['rm_mac'])
except KeyError as e:
logging.error("RM Mini 3 settings not found in config file")
sys.exit(2)
dev = broadlink.gendevice(devicetype, (host, 80), mac)
try:
dev.auth()
logging.info("Successfully initialized RM Mini 3")
except broadlink.exceptions.DeviceOfflineError as e:
logging.error("The RM2 device at %s is offline" % host)
no_device = True
logging.info("Trying to find RM2 device elsewhere on network")
devices = broadlink.discover(5)
for d in devices:
if d.auth():
if d.type == 'RM2':
logging.info(
"Found RM2 device host %s, mac %s" %
(d.host[0], ':'.join(format(x, '02x') for x in d.mac)))
logging.info(
"Update config.ini file with above info for faster startup next time"
)
dev = d
no_device = False
if no_device:
logging.error("No RM2 device found on network, exiting.")
sys.exit(2)
def main():
try:
conf = Config()
except Exception as e:
print("Cannot load configuration from file %s: %s" % (CONFIG, str(e)))
sys.exit(2)
jobs = []
pipes = []
founddevices = {}
def on_message(client, pipes, msg):
topic = msg.topic.replace(conf.get('mqtt_topic_prefix', '/broadlink'),
'')
cmd = topic.split('/')
devicemac = cmd[1]
command = cmd[3]
if cmd[2] == 'cmd':
print("Received command %s for device %s" % (command, devicemac))
try:
for (ID, pipe) in pipes:
if ID == devicemac:
print('send to pipe %s' % ID)
pipe.send((command, msg.payload))
except:
print("Unexpected error:", sys.exc_info()[0])
raise
def on_disconnect(client, empty, rc):
print("Disconnect, reason: " + str(rc))
print("Disconnect, reason: " + str(client))
client.loop_stop()
time.sleep(10)
def on_kill(mqttc, jobs):
mqttc.loop_stop()
for j in jobs:
j.join()
def on_connect(client, userdata, flags, rc):
client.publish(conf.get('mqtt_topic_prefix', '/broadlink'), 'Connect')
print("Connect, reason: " + str(rc))
def on_log(mosq, obj, level, string):
print(string)
mqttc = mqtt.Client(conf.get('mqtt_clientid', 'broadlink') +
'-%s' % os.getpid(),
clean_session=conf.get('mqtt_clean_session', False),
userdata=pipes)
mqttc.on_message = on_message
mqttc.on_connect = on_connect
mqttc.on_disconnect = on_disconnect
#mqttc.on_log = on_log
mqttc.will_set(conf.get('mqtt_topic_prefix', '/broadlink'),
payload="Disconnect",
qos=conf.get('mqtt_qos', 0),
retain=False)
mqttc.reconnect_delay_set(min_delay=3, max_delay=30)
if conf.get('tls') == True:
mqttc.tls_set(conf.get('ca_certs'),
conf.get('certfile'),
conf.get('keyfile'),
tls_version=conf.get('tls_version'),
ciphers=None)
if conf.get('tls_insecure'):
mqttc.tls_insecure_set(True)
mqttc.username_pw_set(conf.get('mqtt_username'), conf.get('mqtt_password'))
mqttc.connect(conf.get('mqtt_broker', 'localhost'),
int(conf.get('mqtt_port', '1883')), 60)
mqttc.subscribe(conf.get('mqtt_topic_prefix', '/broadlink') + '/+/cmd/#',
qos=conf.get('mqtt_qos', 0))
atexit.register(on_kill, mqttc, jobs)
run = True
while run:
try:
for idx, j in enumerate(jobs):
if not j.is_alive():
try:
print("Killing job.")
j.join()
except:
print("Error killing job.")
pass
try:
print("Deleting pipe from pipes array")
for idy, (ID, pipe) in enumerate(pipes):
if ID == founddevices[j.pid]:
del pipes[idy]
except:
print("Error deleting pipe from pipes array")
try:
print("Deleting device from founddevices array.")
del founddevices[j.pid]
except:
print("Error deleting device from founddevices array.")
pass
try:
print("Deleting job from jobs array.")
del jobs[idx]
except:
print("Error deleting job from jobs array.")
pass
print("broadlink discover")
devices = broadlink.discover(timeout=conf.get('lookup_timeout', 5))
for device in devices:
divicemac = ''.join(format(x, '02x') for x in device.mac)
if divicemac not in founddevices.values():
transportPipe, MasterPipe = Pipe()
pipes.append((divicemac, MasterPipe))
print("found: {} {}".format(
device.host[0],
''.join(format(x, '02x') for x in device.mac)))
p = ReadDevice(transportPipe, divicemac, device, conf)
jobs.append(p)
p.start()
founddevices[p.pid] = divicemac
time.sleep(2)
mqttc.user_data_set(pipes)
mqttc.loop_stop()
print("Reconnect")
mqttc.loop_start()
time.sleep(conf.get('rediscover_time', 600))
except KeyboardInterrupt:
run = False
except Exception as e:
run = False
unhandeledException(e)
except SignalException_SIGKILL:
run = False
mqttc.loop_stop()
for j in jobs:
j.join()
return
args = parser.parse_args()
if not os.path.exists(args.config):
with open(args.config, 'w'):
pass # create file
data = {}
with open(args.config, 'r') as f:
try:
data = json.load(f)
except:
pass # if fails, just continue because file might be empty
if not args.display:
print('Connecting to device...')
device = broadlink.discover(local_ip_address='0.0.0.0')
if not device:
print('Could not find device')
exit(1)
device.auth()
print('Connected.')
done = False
learned_frequency = False
def learn():
global learned_frequency
#!/usr/bin/python
import broadlink
import time
import argparse
parser = argparse.ArgumentParser(fromfile_prefix_chars='@');
parser.add_argument("--timeout", type=int, default=5, help="timeout to wait for receiving discovery responses")
args = parser.parse_args()
print "discover"
devices = broadlink.discover(timeout=args.timeout)
#print devices
for device in devices:
if device.auth():
print "###########################################"
# print device
print device.type
print "# broadlink_cli --type 0x2712 --host {} --mac {}".format(device.host[0], ''.join(format(x, '02x') for x in device.mac))
print "Device file data (to be used with --device @filename in broadlink_cli) : "
print "0x2712 {} {}".format(device.host[0], ''.join(format(x, '02x') for x in device.mac))
print "temperature = {}".format(device.check_temperature())
print ""
else:
print "Error authenticating with device : {}".format(device.host)
def send_command(ip_address, command_id, host_ip):
broadcast_address = "255.255.255.255"
if host_ip == 'localhost':
host_ip = None
else:
broadcast_address = host_ip[:host_ip.rfind('.') + 1] + '255'
print(f'broadcast ip is: {broadcast_address}')
parser = argparse.ArgumentParser(fromfile_prefix_chars='@')
parser.add_argument(
"--timeout",
type=int,
default=2,
help="timeout to wait for receiving discovery responses")
parser.add_argument("--ip",
default=host_ip,
help="ip address to use in the discovery")
parser.add_argument("--dst-ip",
default=broadcast_address,
help="destination ip address to use in the discovery")
args = parser.parse_args()
print("Discovering...")
devices = broadlink.discover(timeout=args.timeout,
local_ip_address=args.ip,
discover_ip_address=args.dst_ip)
for device in devices:
if device.auth():
if device.host[0] == ip_address:
# found a match
print("###########################################")
print('Found a match')
print("# broadlink_cli --type {} --host {} --mac {}".format(
hex(device.devtype), device.host[0],
''.join(format(x, '02x') for x in device.mac)))
# we need to find the device and add a command that we just learned
mac_address = ''.join(format(x, '02x') for x in device.mac)
file_name = mac_address + '.json'
script_dir = os.path.dirname(__file__)
file_path = os.path.join(script_dir, './config/')
file_with_path = file_path + file_name
if os.path.exists(file_with_path):
# we need to merge
print('File exists')
with open(file_with_path) as existing_file:
data = json.load(existing_file)
existing_command = list(
filter(lambda x: x['id'] == command_id,
data['commands']))
if data and data[
'mac'] and existing_command and existing_command[
0] and existing_command[0]['id']:
device.send_data(
bytearray.fromhex(''.join(
existing_command[0]['data'])))
print(
"###########################################")
print("command sent!")
command_status = {
"success": True,
"command": existing_command
}
return command_status
else:
# not a vlid mac, we need to just write data
print('No command with that id exists')
command_status = {
"success": False,
"commands": existing_command
}
return command_status
else:
print("Error authenticating with device : {}".format(device.host))
def process_broadlinks(self):
res = False
self.broadlinkObjects = {}
self.adbase.log("Setting up Broadlink Devices")
try:
devices = broadlink.discover(5, self.args.get("local_ip"))
except:
self.adbase.log("Logged an error in errorlog", level="WARNING")
self.adbase.error(traceback.format_exc())
num = len(devices)
if num > 0: # if it found more than 1 device on the network
self.adbase.log(f"Found {num} Broadlink Devices on the Network")
else:
self.adbase.log(
f"Coundn't find any Broadlink Device on the Network",
level="WARNING")
try:
b_namespace = self.broadlinks.get(
"namespace", "default") #get broadlink namespace
for device in devices:
device.auth() #first get device authentication
device_mac = re.findall('..?', device.mac.hex())
#device_mac.reverse()
device_mac = ":".join(device_mac)
for bl, bl_settings in self.broadlinks.items():
b_mac = bl_settings.get("mac").lower()
if b_mac == None:
raise ValueError(
"No Device MAC Address given, please provide MAC Address"
)
if b_mac != device_mac:
continue
b_friendly_name = bl_settings.get(
"friendly_name",
bl.replace("_", " ")) #get device friendly name
self.adbase.set_namespace(b_namespace)
b_device_name = b_friendly_name.lower().replace(" ", "_")
b_device_domain = bl_settings.get("entity_domain",
"sensor")
(b_ip, b_port) = device.host
b_type = device.devtype
entity_id = f"{b_device_domain}.{b_device_name}"
self.broadlinkObjects[
entity_id] = device #store broadlink object
self.broadlinkErrors[entity_id] = 0
self.entities[entity_id] = {}
self.entities[entity_id]["attributes"] = {
"friendly_name": b_friendly_name,
"mac": b_mac,
"ip_address": b_ip,
"port": b_port,
"device_type": b_type
}
self.entities[entity_id]["use_temp_as_attribute"] = False
if bl_settings.get("use_temp_as_attribute", False) is True:
self.entities[entity_id]["attributes"][
"temperature"] = "unavailable"
self.entities[entity_id]["use_temp_attribute"] = True
attr_delay = bl_settings["use_temp_as_attribute"].get(
"update_frequency", 60)
runtime = datetime.datetime.now() + datetime.timedelta(
seconds=2)
self.adbase.run_every(self.update_temperature,
runtime,
attr_delay,
device_entity_id=entity_id,
entity_id=entity_id)
self.adbase.set_state(
entity_id,
state="on",
attributes=self.entities[entity_id]["attributes"])
if "use_sensor_for_temperature" in bl_settings:
sensor_delay = bl_settings[
"use_sensor_for_temperature"].get(
"update_frequency", 60)
friendly_name = bl_settings[
"use_sensor_for_temperature"].get(
"friendly_name", b_friendly_name)
unit_of_measurement = bl_settings[
"use_sensor_for_temperature"].get(
"unit_of_measurement", "C")
runtime = datetime.datetime.now() + datetime.timedelta(
seconds=2)
sensor_entity_id = bl_settings[
"use_sensor_for_temperature"].get(
"name",
f"sensor.{b_friendly_name}_temperature")
self.entities[entity_id][
"temp_sensor"] = sensor_entity_id
self.entities[entity_id]["temp_sensor_attributes"] = {}
self.entities[entity_id]["temp_sensor_attributes"][
"friendly_name"] = friendly_name
self.entities[entity_id]["temp_sensor_attributes"][
"unit_of_measurement"] = unit_of_measurement
self.adbase.run_every(self.update_temperature,
runtime,
sensor_delay,
device_entity_id=entity_id,
entity_id=sensor_entity_id)
except:
self.adbase.log("Logged an error in errorlog", level="WARNING")
self.adbase.error(traceback.format_exc())
if self.entities != {}:
self.adbase.fire_event("Broadlink_Setup", entities=self.entities)
self.adbase.log("Completed Broadlink Device setup")
res = True
return res
def delete_command(ip_address, command_id, host_ip):
broadcast_address = "255.255.255.255"
if host_ip == 'localhost':
host_ip = None
else:
broadcast_address = host_ip[:host_ip.rfind('.') + 1] + '255'
print(f'broadcast ip is: {broadcast_address}')
parser = argparse.ArgumentParser(fromfile_prefix_chars='@')
parser.add_argument(
"--timeout",
type=int,
default=2,
help="timeout to wait for receiving discovery responses")
parser.add_argument("--ip",
default=host_ip,
help="ip address to use in the discovery")
parser.add_argument("--dst-ip",
default=broadcast_address,
help="destination ip address to use in the discovery")
args = parser.parse_args()
print("Discovering...")
devices = broadlink.discover(timeout=args.timeout,
local_ip_address=args.ip,
discover_ip_address=args.dst_ip)
for device in devices:
if device.auth():
if device.host[0] == ip_address:
# found a match
print("###########################################")
print('Found a match')
print("# broadlink_cli --type {} --host {} --mac {}".format(
hex(device.devtype), device.host[0],
''.join(format(x, '02x') for x in device.mac)))
mac_address = ''.join(format(x, '02x') for x in device.mac)
file_name = mac_address + '.json'
script_dir = os.path.dirname(__file__)
file_path = os.path.join(script_dir, './config/')
file_with_path = file_path + file_name
if os.path.exists(file_with_path):
# we can update it
print('File exists, need update commands')
with open(file_with_path) as existing_file:
data = json.load(existing_file)
if data and data['mac'] and data['commands'] and data[
'commands'][0]:
# we have some commands
remaining_commands = list(
filter(lambda x: x['id'] != command_id,
data['commands']))
updated_device = {
"ip": data['ip'],
"mac": data['mac'],
"model": data['model'],
"manufacturer": data['manufacturer'],
"commands": remaining_commands,
"name": data['name'],
"temperature": data['temperature'],
"humidity": data['humidity']
}
write_json_file(file_with_path, updated_device)
return updated_device
else:
print("Error authenticating with device : {}".format(device.host))
import broadlink as blk
d = blk.hello("192.168.0.98") # Device IP address.
print(d)
d.hello()
devices = blk.discover(timeout=10, local_ip_address="192.168.0.150")
for device in devices:
print(f'device.enter_learning: {device.enter_learning}')
if device.auth():
device.enter_learning()
def execute_command(SentCommand,
DeviceName='',
ReKeyCommand=False,
AlternativeIPAddress='',
AlternativePort='',
AlternativeMACAddress='',
AlternativeTimeout=''):
if SentCommand == '':
print('Command name parameter is mandatory')
return 2
if SentCommand == 'DISCOVER':
print('Scanning network for Broadlink devices ... ')
mydevices = broadlink.discover(timeout=5)
print(('Found ' + str(len(mydevices)) + ' broadlink device(s)'))
time.sleep(1)
for index, item in enumerate(mydevices):
mydevices[index].auth()
m = re.match(r"\('([0-9.]+)', ([0-9]+)", str(mydevices[index].host))
ipadd = m.group(1)
port = m.group(2)
macadd = str(''.join(
format(x, '02x') for x in mydevices[index].mac[::-1]))
macadd = macadd[:2] + ":" + macadd[2:4] + ":" + macadd[
4:6] + ":" + macadd[6:8] + ":" + macadd[8:10] + ":" + macadd[10:12]
print(('Device ' + str(index + 1) + ':\nIPAddress = ' + ipadd +
'\nPort = ' + port + '\nMACAddress = ' + macadd))
return
if (DeviceName != '') and ((AlternativeIPAddress != '') or
(AlternativePort != '') or
(AlternativeMACAddress != '') or
(AlternativeTimeout != '')):
print(
'Device name parameter can not be used in conjunction with IP Address/Port/MAC Address/Timeout parameters'
)
return 2
if (((AlternativeIPAddress != '') or (AlternativePort != '') or
(AlternativeMACAddress != '') or (AlternativeTimeout != ''))
and ((AlternativeIPAddress == '') or (AlternativePort == '') or
(AlternativeMACAddress == '') or (AlternativeTimeout == ''))):
print(
'IP Address, Port, MAC Address and Timeout parameters can not be used separately'
)
return 2
if DeviceName != '':
if SettingsFile.has_section(DeviceName):
if SettingsFile.has_option(DeviceName, 'IPAddress'):
DeviceIPAddress = SettingsFile.get(DeviceName, 'IPAddress')
else:
DeviceIPAddress = ''
if SettingsFile.has_option(DeviceName, 'Port'):
DevicePort = SettingsFile.get(DeviceName, 'Port')
else:
DevicePort = ''
if SettingsFile.has_option(DeviceName, 'MACAddress'):
DeviceMACAddress = SettingsFile.get(DeviceName, 'MACAddress')
else:
DeviceMACAddress = ''
if SettingsFile.has_option(DeviceName, 'Timeout'):
DeviceTimeout = SettingsFile.get(DeviceName, 'Timeout')
else:
DeviceTimeout = ''
else:
print('Device does not exist in BlackBeanControl.ini')
return 2
if (DeviceName != '') and (DeviceIPAddress == ''):
print(
'IP address must exist in BlackBeanControl.ini for the selected device'
)
return 2
if (DeviceName != '') and (DevicePort == ''):
print(
'Port must exist in BlackBeanControl.ini for the selected device')
return 2
if (DeviceName != '') and (DeviceMACAddress == ''):
print(
'MAC address must exist in BlackBeanControl.ini for the selected device'
)
return 2
if (DeviceName != '') and (DeviceTimeout == ''):
print(
'Timeout must exist in BlackBeanControl.ini for the selected device'
)
return 2
if DeviceName != '':
RealIPAddress = DeviceIPAddress
elif AlternativeIPAddress != '':
RealIPAddress = AlternativeIPAddress
else:
RealIPAddress = Settings.IPAddress
if RealIPAddress == '':
print(
'IP address must exist in BlackBeanControl.ini or it should be entered as a command line parameter'
)
return 2
if DeviceName != '':
RealPort = DevicePort
elif AlternativePort != '':
RealPort = AlternativePort
else:
RealPort = Settings.Port
if RealPort == '':
print(
'Port must exist in BlackBeanControl.ini or it should be entered as a command line parameter'
)
return 2
else:
RealPort = int(RealPort)
if DeviceName != '':
RealMACAddress = DeviceMACAddress
elif AlternativeMACAddress != '':
RealMACAddress = AlternativeMACAddress
else:
RealMACAddress = Settings.MACAddress
if RealMACAddress == '':
print(
'MAC address must exist in BlackBeanControl.ini or it should be entered as a command line parameter'
)
return 2
else:
RealMACAddress = netaddr.EUI(RealMACAddress)
if DeviceName != '':
RealTimeout = DeviceTimeout
elif AlternativeTimeout != '':
RealTimeout = AlternativeTimeout
else:
RealTimeout = Settings.Timeout
if RealTimeout == '':
print(
'Timeout must exist in BlackBeanControl.ini or it should be entered as a command line parameter'
)
return 2
else:
RealTimeout = int(RealTimeout)
RM3Device = broadlink.rm((RealIPAddress, RealPort), RealMACAddress)
RM3Device.auth()
if ReKeyCommand:
if SettingsFile.has_option('Commands', SentCommand):
CommandFromSettings = SettingsFile.get('Commands', SentCommand)
if CommandFromSettings[0:4] != '2600':
RM3Key = RM3Device.key
RM3IV = RM3Device.iv
DecodedCommand = binascii.unhexlify(CommandFromSettings)
AESEncryption = AES.new(str(RM3Key), AES.MODE_CBC, str(RM3IV))
EncodedCommand = AESEncryption.encrypt(str(DecodedCommand))
FinalCommand = EncodedCommand[0x04:]
EncodedCommand = binascii.hexlify(FinalCommand).decode("ascii")
BlackBeanControlIniFile = open(
path.join(Settings.ApplicationDir, 'BlackBeanControl.ini'),
'w')
SettingsFile.set('Commands', SentCommand, EncodedCommand)
SettingsFile.write(BlackBeanControlIniFile)
BlackBeanControlIniFile.close()
sys.exit()
else:
print("Command appears to already be re-keyed.")
return 2
else:
print("Command not found in ini file for re-keying.")
return 2
if SettingsFile.has_option('Commands', SentCommand):
CommandFromSettings = SettingsFile.get('Commands', SentCommand)
else:
CommandFromSettings = ''
if CommandFromSettings != '':
DecodedCommand = binascii.unhexlify(CommandFromSettings)
RM3Device.send_data(DecodedCommand)
else:
RM3Device.enter_learning()
time.sleep(RealTimeout)
LearnedCommand = RM3Device.check_data()
if LearnedCommand is None:
print('Command not received')
sys.exit()
print(LearnedCommand)
# EncodedCommand = LearnedCommand.encode('hex')
EncodedCommand = binascii.hexlify(LearnedCommand).decode("ascii")
print(EncodedCommand)
if EncodedCommand:
BlackBeanControlIniFile = open(
path.join(Settings.ApplicationDir, 'BlackBeanControl.ini'),
'w')
SettingsFile.set('Commands', SentCommand, EncodedCommand)
SettingsFile.write(BlackBeanControlIniFile)
BlackBeanControlIniFile.close()
print('Set command {0}'.format(SentCommand))
parser = argparse.ArgumentParser(fromfile_prefix_chars='@')
parser.add_argument("--timeout",
type=int,
default=5,
help="timeout to wait for receiving discovery responses")
parser.add_argument("--ip",
default=None,
help="ip address to use in the discovery")
parser.add_argument("--dst-ip",
default="255.255.255.255",
help="destination ip address to use in the discovery")
args = parser.parse_args()
print("Discovering...")
devices = broadlink.discover(timeout=args.timeout,
local_ip_address=args.ip,
discover_ip_address=args.dst_ip)
for device in devices:
if device.auth():
print("###########################################")
print(device.type)
print("# broadlink_cli --type {} --host {} --mac {}".format(
hex(device.devtype), device.host[0],
''.join(format(x, '02x') for x in device.mac)))
print(
"Device file data (to be used with --device @filename in broadlink_cli) : "
)
print("{} {} {}".format(hex(device.devtype), device.host[0],
''.join(format(x, '02x') for x in device.mac)))
try:
print("temperature = {}".format(device.check_temperature()))
if __name__ == '__main__':
if len(sys.argv) == 1 or (len(sys.argv) == 2
and sys.argv[1] in ("-h", "--help")):
print(f'\nUsage: {sys.argv[0]} <device_ip_address> <timeout>')
print(f' <device_ip_address> is required')
print(f' <timeout> is optional argument (5 seconds by default)')
print(f'Usage example: {sys.argv[0]} 192.168.0.42')
sys.exit()
host = sys.argv[1]
timeout = sys.argv[2] if len(sys.argv) > 2 else 5
print('Scanning network for available devices...')
devices = broadlink.discover(timeout=int(timeout))
if not devices:
print('No devices found in network, aborting')
print('* hint: try to ping your device before start this script')
sys.exit()
else:
print(f'Found {len(devices)} device(s)')
device = None
for dev in devices:
if dev.host[0] == host:
print(f'Connecting to: {host}...')
device = dev
device.auth()
print('connected.')
for idx, j in enumerate(jobs):
if not j.is_alive():
try:
j.join()
except:
pass
try:
del founddevices[j.pid]
except:
pass
try:
del jobs[idx]
except:
pass
print "broadlink discover"
devices = broadlink.discover(timeout=conf.get('lookup_timeout', 5))
for device in devices:
divicemac = ''.join(format(x, '02x') for x in device.mac)
if divicemac not in founddevices.values():
transportPipe, MasterPipe = Pipe()
pipes.append((divicemac, MasterPipe))
print "found: {} {}".format(device.host[0], ''.join(format(x, '02x') for x in device.mac))
p = ReadDevice(transportPipe, divicemac, device, conf)
jobs.append(p)
p.start()
founddevices[p.pid] = divicemac
time.sleep(2)
mqttc.user_data_set(pipes)
mqttc.loop_stop()
print "Reconnect"
logging.debug("Done")
else:
logging.warn("No command received")
def replay(device, file):
logging.debug("Replaying command from file " + file)
with open(file, 'rb') as f:
ir_packet = f.read()
device.send_data(ir_packet.decode('hex'))
if __name__ == '__main__':
local_address = cf.get('local_address', None)
lookup_timeout = cf.get('lookup_timeout', 20)
devices = broadlink.discover(timeout=lookup_timeout) if local_address is None else \
broadlink.discover(timeout=lookup_timeout, local_ip_address=local_address)
if len(devices) == 0:
logging.error('No Broadlink device found')
sys.exit(2)
if len(devices) > 1:
logging.error('More than one Broadlink device found (' +
', '.join([d.host for d in devices]) + ')')
sys.exit(2)
device = devices[0]
device.auth()
logging.debug('Connected to %s Broadlink device at %s' %
(device.type, device.host))
clientid = cf.get('mqtt_clientid', 'broadlink-%s' % os.getpid())
#!/usr/bin/python #Script to locate Broadlink devices on local network by Graeme Brown Dec 23 2016 #These must be set up using the Broadlink app first! import broadlink import time print "************************************************" print "Using python library created by Matthew Garrett" print "https://github.com/mjg59/python-broadlink" print "************************************************" print "Scanning network for Broadlink devices...." mydevices = broadlink.discover(timeout=5) print "Found " + str(len(mydevices )) + " broadlink devices" time.sleep(1) print "..............." for index, item in enumerate(mydevices): mydevices[index].auth() ipadd = mydevices[index].host ipadd = str(ipadd) print "Device " + str(index + 1) +" Host address = " + ipadd[1:19] macadd = ''.join(format(x, '02x') for x in mydevices[index].mac[::-1]) macadd = str(macadd) mymacadd = macadd[:2] + " " + macadd[2:4] + " " + macadd[4:6] + " " + macadd[6:8] + " " + macadd[8:10] + " " + macadd[10:12] print "Device " + str(index + 1) +" MAC address = " + mymacadd
import time
from datetime import datetime
import binascii
import argparse
import math
import json
"""
print("************************************************")
print("Using python library created by Matthew Garrett")
print("https://github.com/mjg59/python-broadlink")
print("************************************************")
print("Scanning network for Broadlink devices....")
"""
mydevices = broadlink.discover(timeout=5)
#print("Found " + str(len(mydevices )) + " broadlink devices")
time.sleep(1)
#print("...............")
#dataJson = "{ \"search\" : ["
dataJson = "["
for index, item in enumerate(mydevices):
mydevices[index].auth()
ipadd = mydevices[index].host
ipadd = str(ipadd)
s = str(mydevices[index].host)
start = s.find('(\'') + 2
def setting(self, SSID, password, security=3):
broadlink.setup(SSID, password, security)
return broadlink.discover(
timeout=5) #if not found return empty list []
def readSettingsFile():
global devices
global DeviceByName
global RestrictAccess
global LearnFrom
global OverwriteProtected
global GlobalPassword
global GlobalTimeout
global settingsFile
# A few defaults
serverPort = 8080
Autodetect = False
OverwriteProtected = True
listen_address = '0.0.0.0'
broadcast_address = '255.255.255.255'
settingsFile = configparser.ConfigParser()
settingsFile.optionxform = str
settingsFile.read(settings.settingsINI)
Dev = settings.Dev
GlobalTimeout = settings.GlobalTimeout
DiscoverTimeout = settings.DiscoverTimeout
# Override them
if settingsFile.has_option('General', 'password'):
GlobalPassword = settingsFile.get('General', 'password').strip()
if settingsFile.has_option('General', 'serverPort'):
serverPort = int(settingsFile.get('General', 'serverPort'))
if settingsFile.has_option('General', 'serverAddress'):
listen_address = settingsFile.get('General', 'serverAddress')
if listen_address.strip() == '':
listen_address = '0.0.0.0'
if settingsFile.has_option('General', 'restrictAccess'):
RestrictAccess = settingsFile.get('General', 'restrictAccess').strip()
if settingsFile.has_option('General', 'learnFrom'):
LearnFrom = settingsFile.get('General', 'learnFrom').strip()
if settingsFile.has_option('General', 'allowOverwrite'):
OverwriteProtected = False
if settingsFile.has_option('General', 'broadcastAddress'):
broadcast = settingsFile.get('General', 'broadcastAddress')
if broadcast_address.strip() == '':
broadcast_address = '255.255.255.255'
if settingsFile.has_option('General', 'Autodetect'):
try:
DiscoverTimeout = int(
settingsFile.get('General', 'Autodetect').strip())
except:
DiscoverTimeout = 5
Autodetect = True
settingsFile.remove_option('General', 'Autodetect')
# Device list
DeviceByName = {}
if not settings.DevList:
Autodetect = True
if Autodetect == True:
print("Beginning device auto-detection ... ")
# Try to support multi-homed broadcast better
try:
devices = broadlink.discover(DiscoverTimeout, listen_address,
broadcast_address)
except:
devices = broadlink.discover(DiscoverTimeout, listen_address)
backupSettings()
try:
broadlinkControlIniFile = open(
path.join(settings.applicationDir, 'settings.ini'), 'w')
for device in devices:
try:
device.hostname = socket.gethostbyaddr(device.host[0])[0]
if "." in device.hostname:
device.hostname = device.hostname.split('.')[0]
except:
device.hostname = "Broadlink" + device.type.upper()
if device.hostname in DeviceByName:
device.hostname = "%s-%s" % (
device.hostname, str(device.host).split('.')[3])
DeviceByName[device.hostname] = device
if not settingsFile.has_section(device.hostname):
settingsFile.add_section(device.hostname)
settingsFile.set(device.hostname, 'IPAddress',
str(device.host[0]))
hexmac = ':'.join(["%02x" % (x) for x in reversed(device.mac)])
settingsFile.set(device.hostname, 'MACAddress', hexmac)
settingsFile.set(device.hostname, 'Device',
hex(device.devtype))
settingsFile.set(device.hostname, 'Timeout',
str(device.timeout))
settingsFile.set(device.hostname, 'Type', device.type.upper())
device.auth()
print("%s: Found %s on %s (%s) type: %s" %
(device.hostname, device.type, device.host, hexmac,
hex(device.devtype)))
settingsFile.write(broadlinkControlIniFile)
broadlinkControlIniFile.close()
except StandardError as e:
print("Error writing settings file: %s" % e)
restoreSettings()
else:
devices = []
if settings.DevList:
for devname in settings.DevList:
if Dev[devname, 'Type'] == 'RM' or Dev[devname, 'Type'] == 'RM2':
device = broadlink.rm((Dev[devname, 'IPAddress'], 80),
Dev[devname, 'MACAddress'],
Dev[devname, 'Device'])
if Dev[devname, 'Type'] == 'MP1':
device = broadlink.mp1((Dev[devname, 'IPAddress'], 80),
Dev[devname, 'MACAddress'],
Dev[devname, 'Device'])
if Dev[devname, 'Type'] == 'SP1':
device = broadlink.sp1((Dev[devname, 'IPAddress'], 80),
Dev[devname, 'MACAddress'],
Dev[devname, 'Device'])
if Dev[devname, 'Type'] == 'SP2':
device = broadlink.sp2((Dev[devname, 'IPAddress'], 80),
Dev[devname, 'MACAddress'],
Dev[devname, 'Device'])
if Dev[devname, 'Type'] == 'A1':
device = broadlink.a1((Dev[devname, 'IPAddress'], 80),
Dev[devname, 'MACAddress'],
Dev[devname, 'Device'])
if Dev[devname, 'Type'] == 'HYSEN':
device = broadlink.hysen((Dev[devname, 'IPAddress'], 80),
Dev[devname, 'MACAddress'],
Dev[devname, 'Device'])
if Dev[devname, 'Type'] == 'S1C':
device = broadlink.S1C((Dev[devname, 'IPAddress'], 80),
Dev[devname, 'MACAddress'],
Dev[devname, 'Device'])
if Dev[devname, 'Type'] == 'DOOYA':
device = broadlink.dooya((Dev[devname, 'IPAddress'], 80),
Dev[devname, 'MACAddress'],
Dev[devname, 'Device'])
device.timeout = Dev[devname, 'Timeout']
if not devname in DeviceByName:
device.hostname = devname
device.auth()
devices.append(device)
print("%s: Read %s on %s (%s)" %
(devname, device.type, str(device.host[0]), device.mac))
DeviceByName[devname] = device
return {
"port": serverPort,
"listen": listen_address,
"timeout": GlobalTimeout
}
'lastButtonDown']
if (timeSinceLastButtonDown < DOUBLE_CLICK_THRESHOLD) and (
timeSinceLastButtonDown > DOUBLE_CLICK_MINIMUM):
print 'double click time %s' % timeSinceLastButtonDown
userdata['lastButtonDown'] = None
roonPlayPause()
else:
print 'double click rejected with delta %s' % timeSinceLastButtonDown
userdata['lastButtonDown'] = thisButtonDown
else:
userdata['lastButtonDown'] = thisButtonDown
if __name__ == "__main__":
try:
broadlinkDevice = broadlink.discover(timeout=5)[0]
broadlinkDevice.auth()
logging.info('Connected to Broadlink device.')
except:
logging.info('No broadlink devices found')
broadlinkDevice = None
global mqttClient
global tvIsOn
tvIsOn = False
userData = {
"lastButtonDown": None,
"lastVolumeUp": None,
"lastVolumeDown": None
}
mqttClient = mqtt.Client(userdata=userData)
mqttClient.on_connect = on_connect
