def __init__(self, repourl=None, branch=None, progress=False, mode="incremental", method=None, **kwargs):
self.repourl = repourl
self.method = method
self.mode = mode
self.branch = branch
self.sourcedata = "%s?%s" % (self.repourl, self.branch)
self.databasename = "db.mtn"
self.database = "../db.mtn"
self.progress = progress
Source.__init__(self, **kwargs)
errors = []
if not self._hasAttrGroupMember("mode", self.mode):
errors.append("mode %s is not one of %s" % (self.mode, self._listAttrGroupMembers("mode")))
if self.mode == "incremental" and self.method:
errors.append("Incremental mode does not require method")
if self.mode == "full":
if self.method is None:
self.method = "copy"
elif self.method not in self.possible_methods:
errors.append("Invalid method for mode == %s" % (self.mode))
if repourl is None:
errors.append("you must provide repourl")
if branch is None:
errors.append("you must provide branch")
if errors:
raise ConfigErrors(errors)
def __init__(self, repourl=None, branch=None, progress=False, mode='incremental',
method=None, **kwargs):
self.repourl = repourl
self.method = method
self.mode = mode
self.branch = branch
self.sourcedata = "%s?%s" % (self.repourl, self.branch)
self.databasename = 'db.mtn'
self.database = '../db.mtn'
self.progress = progress
Source.__init__(self, **kwargs)
errors = []
if self.mode not in self.possible_modes:
errors.append("mode %s is not one of %s" % (self.mode, self.possible_modes))
if self.mode == 'incremental' and self.method:
errors.append("Incremental mode does not require method")
if self.mode == 'full':
if self.method == None:
self.method = 'copy'
elif self.method not in self.possible_methods:
errors.append("Invalid method for mode == %s" % (self.mode))
if repourl is None:
errors.append("you must provide repourl")
if branch is None:
errors.append("you must provide branch")
if errors:
raise ConfigErrors(errors)
def __init__(
self,
cvsroot=None,
cvsmodule="",
mode="incremental",
method=None,
branch=None,
global_options=None,
extra_options=None,
login=None,
**kwargs
):
self.cvsroot = cvsroot
self.cvsmodule = cvsmodule
self.branch = branch
if global_options is None:
global_options = []
self.global_options = global_options
if extra_options is None:
extra_options = []
self.extra_options = extra_options
self.login = login
self.mode = mode
self.method = method
self.srcdir = "source"
if not self._hasAttrGroupMember("mode", self.mode):
raise ValueError("mode %s is not one of %s" % (self.mode, self._listAttrGroupMembers("mode")))
Source.__init__(self, **kwargs)
def __init__(self, repourl=None, mode='incremental',
method=None, **kwargs):
self.repourl = repourl
self.method = method
self.mode = mode
Source.__init__(self, **kwargs)
errors = []
if not self._hasAttrGroupMember('mode', self.mode):
errors.append("mode %s is not one of %s" %
(self.mode, self._listAttrGroupMembers('mode')))
if self.mode == 'incremental' and self.method:
errors.append("Incremental mode does not require method")
if self.mode == 'full':
if self.method is None:
self.method = 'copy'
elif self.method not in self.possible_methods:
errors.append("Invalid method for mode == %s" % (self.mode))
if repourl is None:
errors.append("you must provide repourl")
if errors:
raise ConfigErrors(errors)
def __init__(self,
repourl=None,
mode='incremental',
method=None,
defaultBranch=None,
branchType='dirname',
clobberOnBranchChange=True,
**kwargs):
"""
@type repourl: string
@param repourl: the URL which points at the Mercurial repository.
if 'dirname' branches are enabled, this is the base URL
to which a branch name will be appended. It should
probably end in a slash.
@param defaultBranch: if branches are enabled, this is the branch
to use if the Build does not specify one
explicitly.
For 'dirname' branches, It will simply be
appended to C{repourl} and the result handed to
the 'hg update' command.
For 'inrepo' branches, this specifies the named
revision to which the tree will update after a
clone.
@param branchType: either 'dirname' or 'inrepo' depending on whether
the branch name should be appended to the C{repourl}
or the branch is a mercurial named branch and can be
found within the C{repourl}
@param clobberOnBranchChange: boolean, defaults to True. If set and
using inrepos branches, clobber the tree
at each branch change. Otherwise, just
update to the branch.
"""
self.repourl = repourl
self.defaultBranch = self.branch = defaultBranch
self.branchType = branchType
self.method = method
self.clobberOnBranchChange = clobberOnBranchChange
self.mode = mode
Source.__init__(self, **kwargs)
errors = []
if not self._hasAttrGroupMember('mode', self.mode):
errors.append("mode %s is not one of %s" %
(self.mode, self._listAttrGroupMembers('mode')))
if self.method not in self.possible_methods:
errors.append("method %s is not one of %s" %
(self.method, self.possible_methods))
if self.branchType not in self.possible_branchTypes:
errors.append("branchType %s is not one of %s" %
(self.branchType, self.possible_branchTypes))
if repourl is None:
errors.append("you must provide a repourl")
if errors:
raise ConfigErrors(errors)
def __init__(self, repourl=None, branch=None, progress=False, **kwargs):
"""
@type repourl: string
@param repourl: the URI which points at the monotone repository.
@type branch: string
@param branch: The branch or tag to check out by default. If
a build specifies a different branch, it will
be used instead of this.
@type progress: boolean
@param progress: Pass the --ticker=dot option when pulling. This
can solve long fetches getting killed due to
lack of output.
"""
Source.__init__(self, **kwargs)
self.repourl = _ComputeRepositoryURL(repourl)
if (not repourl):
raise ValueError("you must provide a repository uri in 'repourl'")
if (not branch):
raise ValueError("you must provide a default branch in 'branch'")
self.addFactoryArguments(
repourl=repourl,
branch=branch,
progress=progress,
)
self.args.update({
'branch': branch,
'progress': progress,
})
def __init__(self,
manifest_url=None,
manifest_branch="master",
manifest_file="default.xml",
tarball=None,
**kwargs):
"""
@type manifest_url: string
@param manifest_url: The URL which points at the repo manifests repository.
@type manifest_branch: string
@param manifest_branch: The manifest branch to check out by default.
@type manifest_file: string
@param manifest_file: The manifest to use for sync.
"""
Source.__init__(self, **kwargs)
self.manifest_url = _ComputeRepositoryURL(manifest_url)
self.addFactoryArguments(manifest_url=manifest_url,
manifest_branch=manifest_branch,
manifest_file=manifest_file,
tarball=tarball,
)
self.args.update({'manifest_branch': manifest_branch,
'manifest_file': manifest_file,
'tarball': tarball,
'manifest_override_url': None
})
def __init__(self, repourl=None, mode='incremental',
method=None, username=None,
password=None, extra_args=None, keep_on_purge=None,
depth=None, preferLastChangedRev=False, **kwargs):
self.repourl = repourl
self.username = username
self.password = password
self.extra_args = extra_args
self.keep_on_purge = keep_on_purge or []
self.depth = depth
self.method = method
self.mode = mode
self.preferLastChangedRev = preferLastChangedRev
Source.__init__(self, **kwargs)
errors = []
if self.mode not in self.possible_modes:
errors.append("mode %s is not one of %s" % (self.mode, self.possible_modes))
if self.method not in self.possible_methods:
errors.append("method %s is not one of %s" % (self.method, self.possible_methods))
if repourl is None:
errors.append("you must provide repourl")
if errors:
raise ConfigErrors(errors)
def __init__(self,
cvsroot=None,
cvsmodule='',
mode='incremental',
method=None,
branch=None,
global_options=[],
extra_options=[],
login=None,
**kwargs):
self.cvsroot = cvsroot
self.cvsmodule = cvsmodule
self.branch = branch
self.global_options = global_options
self.extra_options = extra_options
self.login = login
self.mode = mode
self.method = method
self.srcdir = 'source'
Source.__init__(self, **kwargs)
self.addFactoryArguments(
cvsroot=cvsroot,
cvsmodule=cvsmodule,
mode=mode,
method=method,
global_options=global_options,
extra_options=extra_options,
login=login,
)
def __init__(self,
repourl=None,
baseURL=None,
mode='incremental',
method=None,
defaultBranch=None,
**kwargs):
self.repourl = repourl
self.baseURL = baseURL
self.branch = defaultBranch
self.mode = mode
self.method = method
Source.__init__(self, **kwargs)
if repourl and baseURL:
raise ValueError("you must provide exactly one of repourl and"
" baseURL")
if repourl is None and baseURL is None:
raise ValueError("you must provide at least one of repourl and"
" baseURL")
if baseURL is not None and defaultBranch is None:
raise ValueError("you must provide defaultBranch with baseURL")
if not self._hasAttrGroupMember('mode', self.mode):
raise ValueError("mode %s is not one of %s" %
(self.mode, self._listAttrGroupMembers('mode')))
if self.mode == 'full':
assert self.method in ['clean', 'fresh', 'clobber', 'copy', None]
def __init__(self, repourl=None, baseURL=None, mode='incremental',
method=None, defaultBranch=None, **kwargs):
self.repourl = repourl
self.baseURL = baseURL
self.branch = defaultBranch
self.mode = mode
self.method = method
Source.__init__(self, **kwargs)
self.addFactoryArguments(repourl=repourl,
mode=mode,
method=method,
baseURL=baseURL,
defaultBranch=defaultBranch,
)
if repourl and baseURL:
raise ValueError("you must provide exactly one of repourl and"
" baseURL")
if repourl is None and baseURL is None:
raise ValueError("you must privide at least one of repourl and"
" baseURL")
if self.repourl is None:
self.repourl = self.baseURL + defaultBranch
assert self.mode in ['incremental', 'full']
if self.mode == 'full':
assert self.method in ['clean', 'fresh', 'clobber', 'copy', None]
def __init__(self, repourl=None, mode='incremental',
method=None, username=None,
password=None, extra_args=None, keep_on_purge=None,
depth=None, **kwargs):
self.repourl = repourl
self.username = username
self.password = password
self.extra_args = extra_args
self.keep_on_purge = keep_on_purge or []
self.depth = depth
self.method=method
self.mode = mode
Source.__init__(self, **kwargs)
errors = []
if self.mode not in self.possible_modes:
errors.append("mode %s is not one of %s" % (self.mode, self.possible_modes))
if self.method not in self.possible_methods:
errors.append("method %s is not one of %s" % (self.method, self.possible_methods))
if repourl is None:
errors.append("you must provide repourl")
if errors:
raise ConfigErrors(errors)
def __init__(self,
repourl=None,
mode='incremental',
method=None,
**kwargs):
self.repourl = repourl
self.method = method
self.mode = mode
Source.__init__(self, **kwargs)
errors = []
if self.mode not in self.possible_modes:
errors.append("mode %s is not one of %s" %
(self.mode, self.possible_modes))
if self.mode == 'incremental' and self.method:
errors.append("Incremental mode does not require method")
if self.mode == 'full':
if self.method is None:
self.method = 'copy'
elif self.method not in self.possible_methods:
errors.append("Invalid method for mode == %s" % (self.mode))
if repourl is None:
errors.append("you must provide repourl")
if errors:
raise ConfigErrors(errors)
def __init__(self,
repourl=None,
baseURL=None,
mode='incremental',
method=None,
defaultBranch=None,
**kwargs):
self.repourl = repourl
self.baseURL = baseURL
self.branch = defaultBranch
self.mode = mode
self.method = method
Source.__init__(self, **kwargs)
if repourl and baseURL:
raise ValueError("you must provide exactly one of repourl and"
" baseURL")
if repourl is None and baseURL is None:
raise ValueError("you must privide at least one of repourl and"
" baseURL")
if baseURL is not None and defaultBranch is None:
raise ValueError("you must provide defaultBranch with baseURL")
assert self.mode in ['incremental', 'full']
if self.mode == 'full':
assert self.method in ['clean', 'fresh', 'clobber', 'copy', None]
def __init__(self,
repourl=None,
mode='incremental',
method=None,
username=None,
password=None,
extra_args=None,
keep_on_purge=None,
depth=None,
preferLastChangedRev=False,
**kwargs):
self.repourl = repourl
self.username = username
self.password = password
self.extra_args = extra_args
self.keep_on_purge = keep_on_purge or []
self.depth = depth
self.method = method
self.mode = mode
self.preferLastChangedRev = preferLastChangedRev
Source.__init__(self, **kwargs)
errors = []
if not self._hasAttrGroupMember('mode', self.mode):
errors.append("mode %s is not one of %s" %
(self.mode, self._listAttrGroupMembers('mode')))
if self.method not in self.possible_methods:
errors.append("method %s is not one of %s" %
(self.method, self.possible_methods))
if repourl is None:
errors.append("you must provide repourl")
if errors:
raise ConfigErrors(errors)
def __init__(self, bkurl=None, baseURL=None,
directory=None, extra_args=None, **kwargs):
"""
@type bkurl: string
@param bkurl: the URL which points to the BitKeeper server.
@type baseURL: string
@param baseURL: if branches are enabled, this is the base URL to
which a branch name will be appended. It should
probably end in a slash. Use exactly one of
C{bkurl} and C{baseURL}.
"""
self.bkurl = _ComputeRepositoryURL(bkurl)
self.baseURL = _ComputeRepositoryURL(baseURL)
self.extra_args = extra_args
Source.__init__(self, **kwargs)
self.addFactoryArguments(bkurl=bkurl,
baseURL=baseURL,
directory=directory,
extra_args=extra_args,
)
if bkurl and baseURL:
raise ValueError("you must use exactly one of bkurl and baseURL")
def __init__(self,
cvsroot=None,
cvsmodule='',
mode='incremental',
method=None,
branch=None,
global_options=None,
extra_options=None,
login=None,
**kwargs):
self.cvsroot = cvsroot
self.cvsmodule = cvsmodule
self.branch = branch
if global_options is None:
global_options = []
self.global_options = global_options
if extra_options is None:
extra_options = []
self.extra_options = extra_options
self.login = login
self.mode = mode
self.method = method
self.srcdir = 'source'
if not self._hasAttrGroupMember('mode', self.mode):
raise ValueError("mode %s is not one of %s" %
(self.mode, self._listAttrGroupMembers('mode')))
Source.__init__(self, **kwargs)
def __init__(self, repourl=None, baseURL=None, mode='incremental',
method=None, defaultBranch=None, **kwargs):
self.repourl = repourl
self.baseURL = baseURL
self.branch = defaultBranch
self.mode = mode
self.method = method
Source.__init__(self, **kwargs)
if repourl and baseURL:
raise ValueError("you must provide exactly one of repourl and"
" baseURL")
if repourl is None and baseURL is None:
raise ValueError("you must privide at least one of repourl and"
" baseURL")
if baseURL is not None and defaultBranch is None:
raise ValueError("you must provide defaultBranch with baseURL")
if not self._hasAttrGroupMember('mode', self.mode):
raise ValueError("mode %s is not one of %s" %
(self.mode, self._listAttrGroupMembers('mode')))
if self.mode == 'full':
assert self.method in ['clean', 'fresh', 'clobber', 'copy', None]
def __init__(self,
cvsroot=None,
cvsmodule='',
mode='incremental',
method=None,
branch=None,
global_options=None,
extra_options=None,
login=None,
**kwargs):
self.cvsroot = cvsroot
self.cvsmodule = cvsmodule
self.branch = branch
if global_options is None:
global_options = []
self.global_options = global_options
if extra_options is None:
extra_options = []
self.extra_options = extra_options
self.login = login
self.mode = mode
self.method = method
self.srcdir = 'source'
Source.__init__(self, **kwargs)
def __init__(
self,
repourl=None,
mode="incremental",
method=None,
defaultBranch=None,
branchType="dirname",
clobberOnBranchChange=True,
**kwargs
):
"""
@type repourl: string
@param repourl: the URL which points at the Mercurial repository.
if 'dirname' branches are enabled, this is the base URL
to which a branch name will be appended. It should
probably end in a slash.
@param defaultBranch: if branches are enabled, this is the branch
to use if the Build does not specify one
explicitly.
For 'dirname' branches, It will simply be
appended to C{repourl} and the result handed to
the 'hg update' command.
For 'inrepo' branches, this specifies the named
revision to which the tree will update after a
clone.
@param branchType: either 'dirname' or 'inrepo' depending on whether
the branch name should be appended to the C{repourl}
or the branch is a mercurial named branch and can be
found within the C{repourl}
@param clobberOnBranchChange: boolean, defaults to True. If set and
using inrepos branches, clobber the tree
at each branch change. Otherwise, just
update to the branch.
"""
self.repourl = repourl
self.defaultBranch = self.branch = defaultBranch
self.branchType = branchType
self.method = method
self.clobberOnBranchChange = clobberOnBranchChange
self.mode = mode
Source.__init__(self, **kwargs)
errors = []
if self.mode not in self.possible_modes:
errors.append("mode %s is not one of %s" % (self.mode, self.possible_modes))
if self.method not in self.possible_methods:
errors.append("method %s is not one of %s" % (self.method, self.possible_methods))
if self.branchType not in self.possible_branchTypes:
errors.append("branchType %s is not one of %s" % (self.branchType, self.possible_branchTypes))
if repourl is None:
errors.append("you must provide a repourl")
if errors:
raise ConfigErrors(errors)
def __init__(self,
bkurl=None,
baseURL=None,
directory=None,
extra_args=None,
**kwargs):
"""
@type bkurl: string
@param bkurl: the URL which points to the BitKeeper server.
@type baseURL: string
@param baseURL: if branches are enabled, this is the base URL to
which a branch name will be appended. It should
probably end in a slash. Use exactly one of
C{bkurl} and C{baseURL}.
"""
self.bkurl = _ComputeRepositoryURL(self, bkurl)
self.baseURL = _ComputeRepositoryURL(self, baseURL)
self.extra_args = extra_args
Source.__init__(self, **kwargs)
if bkurl and baseURL:
raise ValueError("you must use exactly one of bkurl and baseURL")
def __init__(self, repourl=None, branch=None, progress=False, mode='incremental',
method=None, **kwargs):
self.repourl = repourl
self.method = method
self.mode = mode
self.branch = branch
self.sourcedata = "%s?%s" % (self.repourl, self.branch)
self.databasename = 'db.mtn'
self.database = '../db.mtn'
self.progress = progress
Source.__init__(self, **kwargs)
errors = []
if not self._hasAttrGroupMember('mode', self.mode):
errors.append("mode %s is not one of %s" %
(self.mode, self._listAttrGroupMembers('mode')))
if self.mode == 'incremental' and self.method:
errors.append("Incremental mode does not require method")
if self.mode == 'full':
if self.method is None:
self.method = 'copy'
elif self.method not in self.possible_methods:
errors.append("Invalid method for mode == %s" % (self.mode))
if repourl is None:
errors.append("you must provide repourl")
if branch is None:
errors.append("you must provide branch")
if errors:
raise ConfigErrors(errors)
def __init__(self, repourl=None, baseURL=None, defaultBranch=None,
**kwargs):
"""
@type repourl: string
@param repourl: the URL which points at the Darcs repository. This
is used as the default branch. Using C{repourl} does
not enable builds of alternate branches: use
C{baseURL} to enable this. Use either C{repourl} or
C{baseURL}, not both.
@param baseURL: if branches are enabled, this is the base URL to
which a branch name will be appended. It should
probably end in a slash. Use exactly one of
C{repourl} and C{baseURL}.
@param defaultBranch: if branches are enabled, this is the branch
to use if the Build does not specify one
explicitly. It will simply be appended to
C{baseURL} and the result handed to the
'darcs pull' command.
"""
self.repourl = _ComputeRepositoryURL(repourl)
self.baseURL = _ComputeRepositoryURL(baseURL)
self.branch = defaultBranch
Source.__init__(self, **kwargs)
self.addFactoryArguments(repourl=repourl,
baseURL=baseURL,
defaultBranch=defaultBranch,
)
assert self.args['mode'] != "export", \
"Darcs does not have an 'export' mode"
if repourl and baseURL:
raise ValueError("you must provide exactly one of repourl and"
" baseURL")
def __init__(self, repourl=None, branch=None, progress=False, **kwargs):
"""
@type repourl: string
@param repourl: the URI which points at the monotone repository.
@type branch: string
@param branch: The branch or tag to check out by default. If
a build specifies a different branch, it will
be used instead of this.
@type progress: boolean
@param progress: Pass the --ticker=dot option when pulling. This
can solve long fetches getting killed due to
lack of output.
"""
Source.__init__(self, **kwargs)
self.repourl = _ComputeRepositoryURL(repourl)
if (not repourl):
raise ValueError("you must provide a repository uri in 'repourl'")
if (not branch):
raise ValueError("you must provide a default branch in 'branch'")
self.addFactoryArguments(repourl=repourl,
branch=branch,
progress=progress,
)
self.args.update({'branch': branch,
'progress': progress,
})
def __init__(self,
manifest_url=None,
manifest_branch="master",
manifest_file="default.xml",
tarball=None,
**kwargs):
"""
@type manifest_url: string
@param manifest_url: The URL which points at the repo manifests repository.
@type manifest_branch: string
@param manifest_branch: The manifest branch to check out by default.
@type manifest_file: string
@param manifest_file: The manifest to use for sync.
"""
Source.__init__(self, **kwargs)
self.manifest_url = _ComputeRepositoryURL(manifest_url)
self.addFactoryArguments(
manifest_url=manifest_url,
manifest_branch=manifest_branch,
manifest_file=manifest_file,
tarball=tarball,
)
self.args.update({
'manifest_branch': manifest_branch,
'manifest_file': manifest_file,
'tarball': tarball,
'manifest_override_url': None
})
def __init__(self, p4port, p4user, p4passwd, p4client, **kwargs):
assert kwargs["mode"] == "copy", "P4Sync can only be used in mode=copy"
self.branch = None
Source.__init__(self, **kwargs)
self.args["p4port"] = p4port
self.args["p4user"] = p4user
self.args["p4passwd"] = p4passwd
self.args["p4client"] = p4client
def __init__(self, repourl=None, branch='HEAD', mode='incremental',
method=None, submodules=False, shallow=False, progress=False,
retryFetch=False, clobberOnFailure=False, getDescription=False,
**kwargs):
"""
@type repourl: string
@param repourl: the URL which points at the git repository
@type branch: string
@param branch: The branch or tag to check out by default. If
a build specifies a different branch, it will
be used instead of this.
@type submodules: boolean
@param submodules: Whether or not to update (and initialize)
git submodules.
@type mode: string
@param mode: Type of checkout. Described in docs.
@type method: string
@param method: Full builds can be done is different ways. This parameter
specifies which method to use.
@type progress: boolean
@param progress: Pass the --progress option when fetching. This
can solve long fetches getting killed due to
lack of output, but requires Git 1.7.2+.
@type shallow: boolean
@param shallow: Use a shallow or clone, if possible
@type retryFetch: boolean
@param retryFetch: Retry fetching before failing source checkout.
@type getDescription: boolean or dict
@param getDescription: Use 'git describe' to describe the fetched revision
"""
if not getDescription and not isinstance(getDescription, dict):
getDescription = False
self.branch = branch
self.method = method
self.prog = progress
self.repourl = repourl
self.retryFetch = retryFetch
self.submodules = submodules
self.shallow = shallow
self.fetchcount = 0
self.clobberOnFailure = clobberOnFailure
self.mode = mode
self.getDescription = getDescription
Source.__init__(self, **kwargs)
assert self.mode in ['incremental', 'full']
assert self.repourl is not None
if self.mode == 'full':
assert self.method in ['clean', 'fresh', 'clobber', 'copy', None]
assert isinstance(self.getDescription, (bool, dict))
def __init__(self,
manifestURL=None,
manifestBranch="master",
manifestFile="default.xml",
tarball=None,
jobs=None,
syncAllBranches=False,
updateTarballAge=7 * 24.0 * 3600.0,
manifestOverrideUrl=None,
repoDownloads=None,
depth=0,
**kwargs):
"""
@type manifestURL: string
@param manifestURL: The URL which points at the repo manifests repository.
@type manifestBranch: string
@param manifestBranch: The manifest branch to check out by default.
@type manifestFile: string
@param manifestFile: The manifest to use for sync.
@type syncAllBranches: bool.
@param syncAllBranches: true, then we must slowly synchronize all branches.
@type updateTarballAge: float
@param updateTarballAge: renderable to determine the update tarball policy,
given properties
Returns: max age of tarball in seconds, or None, if we
want to skip tarball update
@type manifestOverrideUrl: string
@param manifestOverrideUrl: optional http URL for overriding the manifest
usually coming from Property setup by a ForceScheduler
@type repoDownloads: list of strings
@param repoDownloads: optional repo download to perform after the repo sync
@type depth: integer
@param depth: optional depth parameter to repo init.
If specified, create a shallow clone with given depth.
"""
self.manifestURL = manifestURL
self.manifestBranch = manifestBranch
self.manifestFile = manifestFile
self.tarball = tarball
self.jobs = jobs
self.syncAllBranches = syncAllBranches
self.updateTarballAge = updateTarballAge
self.manifestOverrideUrl = manifestOverrideUrl
if repoDownloads is None:
repoDownloads = []
self.repoDownloads = repoDownloads
self.depth = depth
Source.__init__(self, **kwargs)
assert self.manifestURL is not None
def __init__(self,
manifestURL=None,
manifestBranch="master",
manifestFile="default.xml",
tarball=None,
jobs=None,
syncAllBranches=False,
updateTarballAge=7 * 24.0 * 3600.0,
manifestOverrideUrl=None,
repoDownloads=None,
depth=0,
**kwargs):
"""
@type manifestURL: string
@param manifestURL: The URL which points at the repo manifests repository.
@type manifestBranch: string
@param manifestBranch: The manifest branch to check out by default.
@type manifestFile: string
@param manifestFile: The manifest to use for sync.
@type syncAllBranches: bool.
@param syncAllBranches: true, then we must slowly synchronize all branches.
@type updateTarballAge: float
@param updateTarballAge: renderable to determine the update tarball policy,
given properties
Returns: max age of tarball in seconds, or None, if we
want to skip tarball update
@type manifestOverrideUrl: string
@param manifestOverrideUrl: optional http URL for overriding the manifest
usually coming from Property setup by a ForceScheduler
@type repoDownloads: list of strings
@param repoDownloads: optional repo download to perform after the repo sync
@type depth: integer
@param depth: optional depth parameter to repo init.
If specified, create a shallow clone with given depth.
"""
self.manifestURL = manifestURL
self.manifestBranch = manifestBranch
self.manifestFile = manifestFile
self.tarball = tarball
self.jobs = jobs
self.syncAllBranches = syncAllBranches
self.updateTarballAge = updateTarballAge
self.manifestOverrideUrl = manifestOverrideUrl
if repoDownloads is None:
repoDownloads = []
self.repoDownloads = repoDownloads
self.depth = depth
Source.__init__(self, **kwargs)
assert self.manifestURL is not None
def __init__(self,
repourl=None,
baseURL=None,
defaultBranch=None,
branchType='dirname',
clobberOnBranchChange=True,
**kwargs):
"""
@type repourl: string
@param repourl: the URL which points at the Mercurial repository.
This uses the 'default' branch unless defaultBranch is
specified below and the C{branchType} is set to
'inrepo'. It is an error to specify a branch without
setting the C{branchType} to 'inrepo'.
@param baseURL: if 'dirname' branches are enabled, this is the base URL
to which a branch name will be appended. It should
probably end in a slash. Use exactly one of C{repourl}
and C{baseURL}.
@param defaultBranch: if branches are enabled, this is the branch
to use if the Build does not specify one
explicitly.
For 'dirname' branches, It will simply be
appended to C{baseURL} and the result handed to
the 'hg update' command.
For 'inrepo' branches, this specifies the named
revision to which the tree will update after a
clone.
@param branchType: either 'dirname' or 'inrepo' depending on whether
the branch name should be appended to the C{baseURL}
or the branch is a mercurial named branch and can be
found within the C{repourl}
@param clobberOnBranchChange: boolean, defaults to True. If set and
using inrepos branches, clobber the tree
at each branch change. Otherwise, just
update to the branch.
"""
self.repourl = _ComputeRepositoryURL(repourl)
self.baseURL = _ComputeRepositoryURL(baseURL)
self.branch = defaultBranch
self.branchType = branchType
self.clobberOnBranchChange = clobberOnBranchChange
Source.__init__(self, **kwargs)
self.addFactoryArguments(
repourl=repourl,
baseURL=baseURL,
defaultBranch=defaultBranch,
branchType=branchType,
clobberOnBranchChange=clobberOnBranchChange,
)
if repourl and baseURL:
raise ValueError("you must provide exactly one of repourl and"
" baseURL")
def __init__(self,
manifest_url=None,
manifest_branch="master",
manifest_file="default.xml",
tarball=None,
jobs=None,
sync_all_branches=default_sync_all_branches,
update_tarball=default_update_tarball,
**kwargs):
"""
@type manifest_url: string
@param manifest_url: The URL which points at the repo manifests repository.
@type manifest_branch: string
@param manifest_branch: The manifest branch to check out by default.
@type manifest_file: string
@param manifest_file: The manifest to use for sync.
@type sync_all_branches: lambda properties: bool.
@param sync_all_branches: returns the boolean we must synchronize all branches.
@type update_tarball: lambda (properties,bool) : float
@param update_tarball: function to determine the update tarball policy,
given properties, and boolean indicating whether
the last repo sync was on all branches
Returns: max age of tarball in seconds, or None, if we
want to skip tarball update
"""
self.manifest_url = manifest_url
self.manifest_branch = manifest_branch
self.manifest_file = manifest_file
self.tarball = tarball
self.jobs = jobs
def copy_callable(param_name, f):
if not callable(f):
raise ValueError("%s must be callable,but is of type %s" %
(param_name, type(f)))
setattr(self, param_name, f)
copy_callable("sync_all_branches", sync_all_branches)
copy_callable("update_tarball", update_tarball)
Source.__init__(self, **kwargs)
assert self.manifest_url is not None
self.addFactoryArguments(
manifest_url=manifest_url,
manifest_branch=manifest_branch,
manifest_file=manifest_file,
tarball=tarball,
sync_all_branches=sync_all_branches,
update_tarball=update_tarball,
)
def __init__(self, repourl, branch='master', **kwargs):
self.repourl = repourl
self.branch = branch
kwargs['env'] = {
'GIT_AUTHOR_EMAIL': '*****@*****.**',
'GIT_AUTHOR_NAME': 'ClusterHQ Buildbot',
'GIT_COMMITTER_EMAIL': '*****@*****.**',
'GIT_COMMITTER_NAME': 'ClusterHQ Buildbot',
}
Source.__init__(self, **kwargs)
self.addFactoryArguments(repourl=repourl, branch=branch)
def __init__(self, p4base=None, defaultBranch=None, p4port=None, p4user=None,
p4passwd=None, p4extra_views=[], p4line_end='local',
p4client='buildbot_%(slave)s_%(builder)s', **kwargs):
"""
@type p4base: string
@param p4base: A view into a perforce depot, typically
"//depot/proj/"
@type defaultBranch: string
@param defaultBranch: Identify a branch to build by default. Perforce
is a view based branching system. So, the branch
is normally the name after the base. For example,
branch=1.0 is view=//depot/proj/1.0/...
branch=1.1 is view=//depot/proj/1.1/...
@type p4port: string
@param p4port: Specify the perforce server to connection in the format
<host>:<port>. Example "perforce.example.com:1666"
@type p4user: string
@param p4user: The perforce user to run the command as.
@type p4passwd: string
@param p4passwd: The password for the perforce user.
@type p4extra_views: list of tuples
@param p4extra_views: Extra views to be added to
the client that is being used.
@type p4line_end: string
@param p4line_end: value of the LineEnd client specification property
@type p4client: string
@param p4client: The perforce client to use for this buildslave.
"""
self.p4base = _ComputeRepositoryURL(p4base)
self.branch = defaultBranch
Source.__init__(self, **kwargs)
self.addFactoryArguments(p4base=p4base,
defaultBranch=defaultBranch,
p4port=p4port,
p4user=p4user,
p4passwd=p4passwd,
p4extra_views=p4extra_views,
p4line_end=p4line_end,
p4client=p4client,
)
self.args['p4port'] = p4port
self.args['p4user'] = p4user
self.args['p4passwd'] = p4passwd
self.args['p4extra_views'] = p4extra_views
self.args['p4line_end'] = p4line_end
self.p4client = p4client
def __init__(self, repourl, branch='master',
**kwargs):
self.repourl = repourl
self.branch = branch
kwargs['env'] = {
'GIT_AUTHOR_EMAIL': '*****@*****.**',
'GIT_AUTHOR_NAME': 'ClusterHQ Buildbot',
'GIT_COMMITTER_EMAIL': '*****@*****.**',
'GIT_COMMITTER_NAME': 'ClusterHQ Buildbot',
}
Source.__init__(self, **kwargs)
self.addFactoryArguments(repourl=repourl, branch=branch)
def __init__(self,
repourl=None,
branch="master",
submodules=False,
ignore_ignores=None,
reference=None,
shallow=False,
progress=False,
**kwargs):
"""
@type repourl: string
@param repourl: the URL which points at the git repository
@type branch: string
@param branch: The branch or tag to check out by default. If
a build specifies a different branch, it will
be used instead of this.
@type submodules: boolean
@param submodules: Whether or not to update (and initialize)
git submodules.
@type reference: string
@param reference: The path to a reference repository to obtain
objects from, if any.
@type shallow: boolean
@param shallow: Use a shallow or clone, if possible
@type progress: boolean
@param progress: Pass the --progress option when fetching. This
can solve long fetches getting killed due to
lack of output, but requires Git 1.7.2+.
"""
Source.__init__(self, **kwargs)
self.repourl = _ComputeRepositoryURL(repourl)
self.branch = branch
self.addFactoryArguments(
repourl=repourl,
branch=branch,
submodules=submodules,
ignore_ignores=ignore_ignores,
reference=reference,
shallow=shallow,
progress=progress,
)
self.args.update({
'submodules': submodules,
'ignore_ignores': ignore_ignores,
'reference': reference,
'shallow': shallow,
'progress': progress,
})
def __init__(self, p4port, p4user, p4passwd, p4client, **kwargs):
assert kwargs['mode'] == "copy", "P4Sync can only be used in mode=copy"
self.branch = None
Source.__init__(self, **kwargs)
self.addFactoryArguments(p4port=p4port,
p4user=p4user,
p4passwd=p4passwd,
p4client=p4client,
)
self.args['p4port'] = p4port
self.args['p4user'] = p4user
self.args['p4passwd'] = p4passwd
self.args['p4client'] = p4client
def __init__(self,
manifest_url=None,
manifest_branch="master",
manifest_file="default.xml",
tarball=None,
jobs=None,
sync_all_branches=default_sync_all_branches,
update_tarball=default_update_tarball,
**kwargs):
"""
@type manifest_url: string
@param manifest_url: The URL which points at the repo manifests repository.
@type manifest_branch: string
@param manifest_branch: The manifest branch to check out by default.
@type manifest_file: string
@param manifest_file: The manifest to use for sync.
@type sync_all_branches: lambda properties: bool.
@param sync_all_branches: returns the boolean we must synchronize all branches.
@type update_tarball: lambda (properties,bool) : float
@param update_tarball: function to determine the update tarball policy,
given properties, and boolean indicating whether
the last repo sync was on all branches
Returns: max age of tarball in seconds, or None, if we
want to skip tarball update
"""
self.manifest_url = manifest_url
self.manifest_branch = manifest_branch
self.manifest_file = manifest_file
self.tarball = tarball
self.jobs = jobs
def copy_callable(param_name,f):
if not callable(f):
raise ValueError("%s must be callable,but is of type %s"%(param_name,type(f)))
setattr(self, param_name, f)
copy_callable("sync_all_branches",sync_all_branches)
copy_callable("update_tarball",update_tarball)
Source.__init__(self, **kwargs)
assert self.manifest_url is not None
self.addFactoryArguments(manifest_url=manifest_url,
manifest_branch=manifest_branch,
manifest_file=manifest_file,
tarball=tarball,
sync_all_branches=sync_all_branches,
update_tarball=update_tarball,
)
def __init__(self, repourl=None,
branch="master",
submodules=False,
ignore_ignores=None,
reference=None,
shallow=False,
progress=False,
**kwargs):
"""
@type repourl: string
@param repourl: the URL which points at the git repository
@type branch: string
@param branch: The branch or tag to check out by default. If
a build specifies a different branch, it will
be used instead of this.
@type submodules: boolean
@param submodules: Whether or not to update (and initialize)
git submodules.
@type reference: string
@param reference: The path to a reference repository to obtain
objects from, if any.
@type shallow: boolean
@param shallow: Use a shallow or clone, if possible
@type progress: boolean
@param progress: Pass the --progress option when fetching. This
can solve long fetches getting killed due to
lack of output, but requires Git 1.7.2+.
"""
Source.__init__(self, **kwargs)
self.repourl = _ComputeRepositoryURL(repourl)
self.branch = branch
self.addFactoryArguments(repourl=repourl,
branch=branch,
submodules=submodules,
ignore_ignores=ignore_ignores,
reference=reference,
shallow=shallow,
progress=progress,
)
self.args.update({'submodules': submodules,
'ignore_ignores': ignore_ignores,
'reference': reference,
'shallow': shallow,
'progress': progress,
})
def __init__(self, cvsroot=None, cvsmodule='', mode='incremental',
method=None, branch=None, global_options=[], extra_options=[],
login=None, **kwargs):
self.cvsroot = cvsroot
self.cvsmodule = cvsmodule
self.branch = branch
self.global_options = global_options
self.extra_options = extra_options
self.login = login
self.mode = mode
self.method = method
self.srcdir = 'source'
Source.__init__(self, **kwargs)
def __init__(self, repourl=None, baseURL=None, defaultBranch=None,
branchType='dirname', clobberOnBranchChange=True, **kwargs):
"""
@type repourl: string
@param repourl: the URL which points at the Mercurial repository.
This uses the 'default' branch unless defaultBranch is
specified below and the C{branchType} is set to
'inrepo'. It is an error to specify a branch without
setting the C{branchType} to 'inrepo'.
@param baseURL: if 'dirname' branches are enabled, this is the base URL
to which a branch name will be appended. It should
probably end in a slash. Use exactly one of C{repourl}
and C{baseURL}.
@param defaultBranch: if branches are enabled, this is the branch
to use if the Build does not specify one
explicitly.
For 'dirname' branches, It will simply be
appended to C{baseURL} and the result handed to
the 'hg update' command.
For 'inrepo' branches, this specifies the named
revision to which the tree will update after a
clone.
@param branchType: either 'dirname' or 'inrepo' depending on whether
the branch name should be appended to the C{baseURL}
or the branch is a mercurial named branch and can be
found within the C{repourl}
@param clobberOnBranchChange: boolean, defaults to True. If set and
using inrepos branches, clobber the tree
at each branch change. Otherwise, just
update to the branch.
"""
self.repourl = _ComputeRepositoryURL(repourl)
self.baseURL = _ComputeRepositoryURL(baseURL)
self.branch = defaultBranch
self.branchType = branchType
self.clobberOnBranchChange = clobberOnBranchChange
Source.__init__(self, **kwargs)
self.addFactoryArguments(repourl=repourl,
baseURL=baseURL,
defaultBranch=defaultBranch,
branchType=branchType,
clobberOnBranchChange=clobberOnBranchChange,
)
if repourl and baseURL:
raise ValueError("you must provide exactly one of repourl and"
" baseURL")
def __init__(self, p4port, p4user, p4passwd, p4client, **kwargs):
assert kwargs['mode'] == "copy", "P4Sync can only be used in mode=copy"
self.branch = None
Source.__init__(self, **kwargs)
self.addFactoryArguments(
p4port=p4port,
p4user=p4user,
p4passwd=p4passwd,
p4client=p4client,
)
self.args['p4port'] = p4port
self.args['p4user'] = p4user
self.args['p4passwd'] = p4passwd
self.args['p4client'] = p4client
def __init__(self, svnurl=None, baseURL=None, defaultBranch=None,
directory=None, username=None, password=None,
extra_args=None, keep_on_purge=None, ignore_ignores=None,
always_purge=None, depth=None, **kwargs):
"""
@type svnurl: string
@param svnurl: the URL which points to the Subversion server,
combining the access method (HTTP, ssh, local file),
the repository host/port, the repository path, the
sub-tree within the repository, and the branch to
check out. Use exactly one of C{svnurl} and C{baseURL}.
@param baseURL: if branches are enabled, this is the base URL to
which a branch name will be appended. It should
probably end in a slash. Use exactly one of
C{svnurl} and C{baseURL}.
@param defaultBranch: if branches are enabled, this is the branch
to use if the Build does not specify one
explicitly. It will simply be appended
to C{baseURL} and the result handed to
the SVN command.
@type username: string
@param username: username to pass to svn's --username
@type password: string
@param password: password to pass to svn's --password
"""
if not 'workdir' in kwargs and directory is not None:
# deal with old configs
warn("Please use workdir=, not directory=", DeprecationWarning)
kwargs['workdir'] = directory
self.svnurl = svnurl and _ComputeRepositoryURL(self, svnurl)
self.baseURL = _ComputeRepositoryURL(self, baseURL)
self.branch = defaultBranch
self.username = username
self.password = password
self.extra_args = extra_args
self.keep_on_purge = keep_on_purge
self.ignore_ignores = ignore_ignores
self.always_purge = always_purge
self.depth = depth
Source.__init__(self, **kwargs)
if svnurl and baseURL:
raise ValueError("you must use either svnurl OR baseURL")
def __init__(self,
repourl=None,
baseURL=None,
defaultBranch=None,
forceSharedRepo=None,
**kwargs):
"""
@type repourl: string
@param repourl: the URL which points at the bzr repository. This
is used as the default branch. Using C{repourl} does
not enable builds of alternate branches: use
C{baseURL} to enable this. Use either C{repourl} or
C{baseURL}, not both.
@param baseURL: if branches are enabled, this is the base URL to
which a branch name will be appended. It should
probably end in a slash. Use exactly one of
C{repourl} and C{baseURL}.
@param defaultBranch: if branches are enabled, this is the branch
to use if the Build does not specify one
explicitly. It will simply be appended to
C{baseURL} and the result handed to the
'bzr checkout pull' command.
@param forceSharedRepo: Boolean, defaults to False. If set to True,
the working directory will be made into a
bzr shared repository if it is not already.
Shared repository greatly reduces the amount
of history data that needs to be downloaded
if not using update/copy mode, or if using
update/copy mode with multiple branches.
"""
self.repourl = _ComputeRepositoryURL(repourl)
self.baseURL = _ComputeRepositoryURL(baseURL)
self.branch = defaultBranch
Source.__init__(self, **kwargs)
self.addFactoryArguments(repourl=repourl,
baseURL=baseURL,
defaultBranch=defaultBranch,
forceSharedRepo=forceSharedRepo)
self.args.update({'forceSharedRepo': forceSharedRepo})
if repourl and baseURL:
raise ValueError("you must provide exactly one of repourl and"
" baseURL")
def __init__(self, repourl=None, baseURL=None, defaultBranch=None,
forceSharedRepo=None,
**kwargs):
"""
@type repourl: string
@param repourl: the URL which points at the bzr repository. This
is used as the default branch. Using C{repourl} does
not enable builds of alternate branches: use
C{baseURL} to enable this. Use either C{repourl} or
C{baseURL}, not both.
@param baseURL: if branches are enabled, this is the base URL to
which a branch name will be appended. It should
probably end in a slash. Use exactly one of
C{repourl} and C{baseURL}.
@param defaultBranch: if branches are enabled, this is the branch
to use if the Build does not specify one
explicitly. It will simply be appended to
C{baseURL} and the result handed to the
'bzr checkout pull' command.
@param forceSharedRepo: Boolean, defaults to False. If set to True,
the working directory will be made into a
bzr shared repository if it is not already.
Shared repository greatly reduces the amount
of history data that needs to be downloaded
if not using update/copy mode, or if using
update/copy mode with multiple branches.
"""
self.repourl = _ComputeRepositoryURL(repourl)
self.baseURL = _ComputeRepositoryURL(baseURL)
self.branch = defaultBranch
Source.__init__(self, **kwargs)
self.addFactoryArguments(repourl=repourl,
baseURL=baseURL,
defaultBranch=defaultBranch,
forceSharedRepo=forceSharedRepo
)
self.args.update({'forceSharedRepo': forceSharedRepo})
if repourl and baseURL:
raise ValueError("you must provide exactly one of repourl and"
" baseURL")
def __init__(self, repourl=None, baseURL=None, mode="incremental", method=None, defaultBranch=None, **kwargs):
self.repourl = repourl
self.baseURL = baseURL
self.branch = defaultBranch
self.mode = mode
self.method = method
Source.__init__(self, **kwargs)
if repourl and baseURL:
raise ValueError("you must provide exactly one of repourl and" " baseURL")
if repourl is None and baseURL is None:
raise ValueError("you must privide at least one of repourl and" " baseURL")
if baseURL is not None and defaultBranch is None:
raise ValueError("you must provide defaultBranch with baseURL")
assert self.mode in ["incremental", "full"]
if self.mode == "full":
assert self.method in ["clean", "fresh", "clobber", "copy", None]
def __init__(self, repourl=None, baseURL=None, mode='incremental',
method=None, defaultBranch=None, username=None,
password=None, extra_args=None, keep_on_purge=None,
depth=None, **kwargs):
self.repourl = repourl
self.baseURL = baseURL
self.branch = defaultBranch
self.username = username
self.password = password
self.extra_args = extra_args
self.keep_on_purge = keep_on_purge or []
self.depth = depth
self.method=method
self.mode = mode
Source.__init__(self, **kwargs)
self.addFactoryArguments(repourl=repourl,
baseURL=baseURL,
mode=mode,
method=method,
defaultBranch=defaultBranch,
password=password,
username=username,
extra_args=extra_args,
keep_on_purge=keep_on_purge,
depth=depth,
)
errors = []
if self.mode not in self.possible_modes:
errors.append("mode %s is not one of %s" % (self.mode, self.possible_modes))
if self.method not in self.possible_methods:
errors.append("method %s is not one of %s" % (self.method, self.possible_methods))
if repourl and baseURL:
errors.append("you must provide exactly one of repourl and baseURL")
if repourl is None and baseURL is None:
errors.append("you must privide at least one of repourl and baseURL")
if errors:
raise ConfigErrors(errors)
def __init__(self,
repourl=None,
baseURL=None,
defaultBranch=None,
**kwargs):
"""
@type repourl: string
@param repourl: the URL which points at the Darcs repository. This
is used as the default branch. Using C{repourl} does
not enable builds of alternate branches: use
C{baseURL} to enable this. Use either C{repourl} or
C{baseURL}, not both.
@param baseURL: if branches are enabled, this is the base URL to
which a branch name will be appended. It should
probably end in a slash. Use exactly one of
C{repourl} and C{baseURL}.
@param defaultBranch: if branches are enabled, this is the branch
to use if the Build does not specify one
explicitly. It will simply be appended to
C{baseURL} and the result handed to the
'darcs pull' command.
"""
self.repourl = _ComputeRepositoryURL(repourl)
self.baseURL = _ComputeRepositoryURL(baseURL)
self.branch = defaultBranch
Source.__init__(self, **kwargs)
self.addFactoryArguments(
repourl=repourl,
baseURL=baseURL,
defaultBranch=defaultBranch,
)
assert self.args['mode'] != "export", \
"Darcs does not have an 'export' mode"
if repourl and baseURL:
raise ValueError("you must provide exactly one of repourl and"
" baseURL")
def __init__(
self, manifest_url=None, manifest_branch="master", manifest_file="default.xml", tarball=None, **kwargs
):
"""
@type manifest_url: string
@param manifest_url: The URL which points at the repo manifests repository.
@type manifest_branch: string
@param manifest_branch: The manifest branch to check out by default.
@type manifest_file: string
@param manifest_file: The manifest to use for sync.
"""
Source.__init__(self, **kwargs)
self.manifest_url = _ComputeRepositoryURL(manifest_url)
self.args.update(
{
"manifest_branch": manifest_branch,
"manifest_file": manifest_file,
"tarball": tarball,
"manifest_override_url": None,
}
)
def __init__(self,
cvsroot=None,
cvsmodule="",
global_options=[],
branch=None,
checkoutDelay=None,
checkout_options=[],
export_options=[],
extra_options=[],
login=None,
**kwargs):
"""
@type cvsroot: string
@param cvsroot: CVS Repository from which the source tree should
be obtained. '/home/warner/Repository' for local
or NFS-reachable repositories,
':pserver:[email protected]:/cvs' for anonymous CVS,
'[email protected]:/cvs' for non-anonymous CVS or
CVS over ssh. Lots of possibilities, check the
CVS documentation for more.
@type cvsmodule: string
@param cvsmodule: subdirectory of CVS repository that should be
retrieved
@type login: string or None
@param login: if not None, a string which will be provided as a
password to the 'cvs login' command, used when a
:pserver: method is used to access the repository.
This login is only needed once, but must be run
each time (just before the CVS operation) because
there is no way for the buildslave to tell whether
it was previously performed or not.
@type branch: string
@param branch: the default branch name, will be used in a '-r'
argument to specify which branch of the source tree
should be used for this checkout. Defaults to None,
which means to use 'HEAD'.
@type checkoutDelay: int or None
@param checkoutDelay: if not None, the number of seconds to put
between the last known Change and the
timestamp given to the -D argument. This
defaults to exactly half of the parent
Build's .treeStableTimer, but it could be
set to something else if your CVS change
notification has particularly weird
latency characteristics.
@type global_options: list of strings
@param global_options: these arguments are inserted in the cvs
command line, before the
'checkout'/'update' command word. See
'cvs --help-options' for a list of what
may be accepted here. ['-r'] will make
the checked out files read only. ['-r',
'-R'] will also assume the repository is
read-only (I assume this means it won't
use locks to insure atomic access to the
,v files).
@type checkout_options: list of strings
@param checkout_options: these arguments are inserted in the cvs
command line, after 'checkout' but before
branch or revision specifiers.
@type export_options: list of strings
@param export_options: these arguments are inserted in the cvs
command line, after 'export' but before
branch or revision specifiers.
@type extra_options: list of strings
@param extra_options: these arguments are inserted in the cvs
command line, after 'checkout' or 'export' but before
branch or revision specifiers.
"""
self.checkoutDelay = checkoutDelay
self.branch = branch
self.cvsroot = _ComputeRepositoryURL(cvsroot)
Source.__init__(self, **kwargs)
self.addFactoryArguments(
cvsroot=cvsroot,
cvsmodule=cvsmodule,
global_options=global_options,
checkout_options=checkout_options,
export_options=export_options,
extra_options=extra_options,
branch=branch,
checkoutDelay=checkoutDelay,
login=login,
)
self.args.update({
'cvsmodule': cvsmodule,
'global_options': global_options,
'checkout_options': checkout_options,
'export_options': export_options,
'extra_options': extra_options,
'login': login,
})
def __init__(
self,
repourl=None,
branch="HEAD",
mode="incremental",
method=None,
reference=None,
submodules=False,
shallow=False,
progress=False,
retryFetch=False,
clobberOnFailure=False,
getDescription=False,
config=None,
origin=None,
**kwargs
):
"""
@type repourl: string
@param repourl: the URL which points at the git repository
@type branch: string
@param branch: The branch or tag to check out by default. If
a build specifies a different branch, it will
be used instead of this.
@type submodules: boolean
@param submodules: Whether or not to update (and initialize)
git submodules.
@type mode: string
@param mode: Type of checkout. Described in docs.
@type method: string
@param method: Full builds can be done is different ways. This parameter
specifies which method to use.
@type reference: string
@param reference: If available use a reference repo.
Uses `--reference` in git command. Refer `git clone --help`
@type progress: boolean
@param progress: Pass the --progress option when fetching. This
can solve long fetches getting killed due to
lack of output, but requires Git 1.7.2+.
@type shallow: boolean or integer
@param shallow: Use a shallow or clone, if possible
@type retryFetch: boolean
@param retryFetch: Retry fetching before failing source checkout.
@type getDescription: boolean or dict
@param getDescription: Use 'git describe' to describe the fetched revision
@type origin: string
@param origin: The name to give the remote when cloning (default None)
@type config: dict
@param config: Git configuration options to enable when running git
"""
if not getDescription and not isinstance(getDescription, dict):
getDescription = False
self.branch = branch
self.method = method
self.prog = progress
self.repourl = repourl
self.reference = reference
self.retryFetch = retryFetch
self.submodules = submodules
self.shallow = shallow
self.clobberOnFailure = clobberOnFailure
self.mode = mode
self.getDescription = getDescription
self.config = config
self.supportsBranch = True
self.supportsSubmoduleCheckout = True
self.srcdir = "source"
self.origin = origin
Source.__init__(self, **kwargs)
if not self.repourl:
bbconfig.error("Git: must provide repourl.")
if isinstance(self.mode, string_types):
if not self._hasAttrGroupMember("mode", self.mode):
bbconfig.error("Git: mode must be %s" % (" or ".join(self._listAttrGroupMembers("mode"))))
if isinstance(self.method, string_types):
if self.mode == "full" and self.method not in ["clean", "fresh", "clobber", "copy", None]:
bbconfig.error("Git: invalid method for mode 'full'.")
if self.shallow and (self.mode != "full" or self.method != "clobber"):
bbconfig.error("Git: shallow only possible with mode 'full' and method 'clobber'.")
if not isinstance(self.getDescription, (bool, dict)):
bbconfig.error("Git: getDescription must be a boolean or a dict.")
def __init__(self, mode='update', retry=None, **kwargs):
"""
@type mode: string
@param mode: the kind of VC operation that is desired:
- 'update': specifies that the checkout/update should be
performed directly into the workdir. Each build is performed
in the same directory, allowing for incremental builds. This
minimizes disk space, bandwidth, and CPU time. However, it
may encounter problems if the build process does not handle
dependencies properly (if you must sometimes do a 'clean
build' to make sure everything gets compiled), or if source
files are deleted but generated files can influence test
behavior (e.g. python's .pyc files), or when source
directories are deleted but generated files prevent CVS from
removing them. When used with a patched checkout, from a
previous buildbot try for instance, it will try to "revert"
the changes first and will do a clobber if it is unable to
get a clean checkout. The behavior is SCM-dependent.
- 'copy': specifies that the source-controlled workspace
should be maintained in a separate directory (called the
'copydir'), using checkout or update as necessary. For each
build, a new workdir is created with a copy of the source
tree (rm -rf workdir; cp -R -P -p copydir workdir). This
doubles the disk space required, but keeps the bandwidth low
(update instead of a full checkout). A full 'clean' build
is performed each time. This avoids any generated-file
build problems, but is still occasionally vulnerable to
problems such as a CVS repository being manually rearranged
(causing CVS errors on update) which are not an issue with
a full checkout.
- 'clobber': specifies that the working directory should be
deleted each time, necessitating a full checkout for each
build. This insures a clean build off a complete checkout,
avoiding any of the problems described above, but is
bandwidth intensive, as the whole source tree must be
pulled down for each build.
- 'export': is like 'clobber', except that e.g. the 'cvs
export' command is used to create the working directory.
This command removes all VC metadata files (the
CVS/.svn/{arch} directories) from the tree, which is
sometimes useful for creating source tarballs (to avoid
including the metadata in the tar file). Not all VC systems
support export.
@type retry: tuple of ints (delay, repeats) (or None)
@param retry: if provided, VC update failures are re-attempted up
to REPEATS times, with DELAY seconds between each
attempt. Some users have slaves with poor connectivity
to their VC repository, and they say that up to 80% of
their build failures are due to transient network
failures that could be handled by simply retrying a
couple times.
"""
Source.__init__(self, **kwargs)
assert mode in ("update", "copy", "clobber", "export")
if retry:
delay, repeats = retry
assert isinstance(repeats, int)
assert repeats > 0
self.args = {
'mode': mode,
'retry': retry,
}
def start(self):
self.args['workdir'] = self.workdir
self.args['logEnviron'] = self.logEnviron
self.args['env'] = self.env
self.args['timeout'] = self.timeout
Source.start(self)
def __init__(self,
p4base=None,
defaultBranch=None,
p4port=None,
p4user=None,
p4passwd=None,
p4extra_views=[],
p4line_end='local',
p4client='buildbot_%(slave)s_%(builder)s',
**kwargs):
"""
@type p4base: string
@param p4base: A view into a perforce depot, typically
"//depot/proj/"
@type defaultBranch: string
@param defaultBranch: Identify a branch to build by default. Perforce
is a view based branching system. So, the branch
is normally the name after the base. For example,
branch=1.0 is view=//depot/proj/1.0/...
branch=1.1 is view=//depot/proj/1.1/...
@type p4port: string
@param p4port: Specify the perforce server to connection in the format
<host>:<port>. Example "perforce.example.com:1666"
@type p4user: string
@param p4user: The perforce user to run the command as.
@type p4passwd: string
@param p4passwd: The password for the perforce user.
@type p4extra_views: list of tuples
@param p4extra_views: Extra views to be added to
the client that is being used.
@type p4line_end: string
@param p4line_end: value of the LineEnd client specification property
@type p4client: string
@param p4client: The perforce client to use for this buildslave.
"""
self.p4base = _ComputeRepositoryURL(p4base)
self.branch = defaultBranch
Source.__init__(self, **kwargs)
self.addFactoryArguments(
p4base=p4base,
defaultBranch=defaultBranch,
p4port=p4port,
p4user=p4user,
p4passwd=p4passwd,
p4extra_views=p4extra_views,
p4line_end=p4line_end,
p4client=p4client,
)
self.args['p4port'] = p4port
self.args['p4user'] = p4user
self.args['p4passwd'] = p4passwd
self.args['p4extra_views'] = p4extra_views
self.args['p4line_end'] = p4line_end
self.p4client = p4client
def __init__(self,
repourl=None,
branch='HEAD',
mode='incremental',
method=None,
submodules=False,
shallow=False,
progress=False,
retryFetch=False,
clobberOnFailure=False,
getDescription=False,
**kwargs):
"""
@type repourl: string
@param repourl: the URL which points at the git repository
@type branch: string
@param branch: The branch or tag to check out by default. If
a build specifies a different branch, it will
be used instead of this.
@type submodules: boolean
@param submodules: Whether or not to update (and initialize)
git submodules.
@type mode: string
@param mode: Type of checkout. Described in docs.
@type method: string
@param method: Full builds can be done is different ways. This parameter
specifies which method to use.
@type progress: boolean
@param progress: Pass the --progress option when fetching. This
can solve long fetches getting killed due to
lack of output, but requires Git 1.7.2+.
@type shallow: boolean
@param shallow: Use a shallow or clone, if possible
@type retryFetch: boolean
@param retryFetch: Retry fetching before failing source checkout.
@type getDescription: boolean or dict
@param getDescription: Use 'git describe' to describe the fetched revision
"""
if not getDescription and not isinstance(getDescription, dict):
getDescription = False
self.branch = branch
self.method = method
self.prog = progress
self.repourl = repourl
self.retryFetch = retryFetch
self.submodules = submodules
self.shallow = shallow
self.fetchcount = 0
self.clobberOnFailure = clobberOnFailure
self.mode = mode
self.getDescription = getDescription
Source.__init__(self, **kwargs)
assert self.mode in ['incremental', 'full']
assert self.repourl is not None
if self.mode == 'full':
assert self.method in ['clean', 'fresh', 'clobber', 'copy', None]
assert isinstance(self.getDescription, (bool, dict))
def __init__(self,
svnurl=None,
baseURL=None,
defaultBranch=None,
directory=None,
username=None,
password=None,
extra_args=None,
keep_on_purge=None,
ignore_ignores=None,
always_purge=None,
depth=None,
**kwargs):
"""
@type svnurl: string
@param svnurl: the URL which points to the Subversion server,
combining the access method (HTTP, ssh, local file),
the repository host/port, the repository path, the
sub-tree within the repository, and the branch to
check out. Use exactly one of C{svnurl} and C{baseURL}.
@param baseURL: if branches are enabled, this is the base URL to
which a branch name will be appended. It should
probably end in a slash. Use exactly one of
C{svnurl} and C{baseURL}.
@param defaultBranch: if branches are enabled, this is the branch
to use if the Build does not specify one
explicitly. It will simply be appended
to C{baseURL} and the result handed to
the SVN command.
@type username: string
@param username: username to pass to svn's --username
@type password: string
@param password: password to pass to svn's --password
"""
if not 'workdir' in kwargs and directory is not None:
# deal with old configs
warn("Please use workdir=, not directory=", DeprecationWarning)
kwargs['workdir'] = directory
self.svnurl = svnurl and _ComputeRepositoryURL(svnurl)
self.baseURL = _ComputeRepositoryURL(baseURL)
self.branch = defaultBranch
self.username = username
self.password = password
self.extra_args = extra_args
self.keep_on_purge = keep_on_purge
self.ignore_ignores = ignore_ignores
self.always_purge = always_purge
self.depth = depth
Source.__init__(self, **kwargs)
self.addFactoryArguments(
svnurl=svnurl,
baseURL=baseURL,
defaultBranch=defaultBranch,
directory=directory,
username=username,
password=password,
extra_args=extra_args,
keep_on_purge=keep_on_purge,
ignore_ignores=ignore_ignores,
always_purge=always_purge,
depth=depth,
)
if svnurl and baseURL:
raise ValueError("you must use either svnurl OR baseURL")
def __init__(self, repourl=None, branch='HEAD', mode='incremental', method=None,
reference=None, submodules=False, shallow=False, progress=False, retryFetch=False,
clobberOnFailure=False, getDescription=False, config=None, **kwargs):
"""
@type repourl: string
@param repourl: the URL which points at the git repository
@type branch: string
@param branch: The branch or tag to check out by default. If
a build specifies a different branch, it will
be used instead of this.
@type submodules: boolean
@param submodules: Whether or not to update (and initialize)
git submodules.
@type mode: string
@param mode: Type of checkout. Described in docs.
@type method: string
@param method: Full builds can be done is different ways. This parameter
specifies which method to use.
@type reference: string
@param reference: If available use a reference repo.
Uses `--reference` in git command. Refer `git clone --help`
@type progress: boolean
@param progress: Pass the --progress option when fetching. This
can solve long fetches getting killed due to
lack of output, but requires Git 1.7.2+.
@type shallow: boolean
@param shallow: Use a shallow or clone, if possible
@type retryFetch: boolean
@param retryFetch: Retry fetching before failing source checkout.
@type getDescription: boolean or dict
@param getDescription: Use 'git describe' to describe the fetched revision
@type config: dict
@param config: Git configuration options to enable when running git
"""
if not getDescription and not isinstance(getDescription, dict):
getDescription = False
self.branch = branch
self.method = method
self.prog = progress
self.repourl = repourl
self.reference = reference
self.retryFetch = retryFetch
self.submodules = submodules
self.shallow = shallow
self.fetchcount = 0
self.clobberOnFailure = clobberOnFailure
self.mode = mode
self.getDescription = getDescription
self.config = config
self.supportsBranch = True
self.srcdir = 'source'
Source.__init__(self, **kwargs)
if self.mode not in ['incremental', 'full']:
bbconfig.error("Git: mode must be 'incremental' or 'full'.")
if not self.repourl:
bbconfig.error("Git: must provide repourl.")
if (self.mode == 'full' and
self.method not in ['clean', 'fresh', 'clobber', 'copy', None]):
bbconfig.error("Git: invalid method for mode 'full'.")
if self.shallow and (self.mode != 'full' or self.method != 'clobber'):
bbconfig.error("Git: shallow only possible with mode 'full' and method 'clobber'.")
if not isinstance(self.getDescription, (bool, dict)):
bbconfig.error("Git: getDescription must be a boolean or a dict.")
def __init__(self, repourl=None, branch='HEAD', mode='incremental',
method=None, submodules=False, shallow=False, progress=False,
retryFetch=False, clobberOnFailure=False, getDescription=False,
workdir='build', layername=None, storedir="/tmp/junk", mirrordir=None,
config=None, **kwargs):
"""
@type repourl: string
@param repourl: the URL which points at the git repository
@type branch: string
@param branch: The branch or tag to check out by default. If
a build specifies a different branch, it will
be used instead of this.
@type submodules: boolean
@param submodules: Whether or not to update (and initialize)
git submodules.
@type mode: string
@param mode: Type of checkout. Described in docs.
@type method: string
@param method: Full builds can be done is different ways. This parameter
specifies which method to use.
@type progress: boolean
@param progress: Pass the --progress option when fetching. This
can solve long fetches getting killed due to
lack of output, but requires Git 1.7.2+.
@type shallow: boolean
@param shallow: Use a shallow or clone, if possible
@type retryFetch: boolean
@param retryFetch: Retry fetching before failing source checkout.
@type getDescription: boolean or dict
@param getDescription: Use 'git describe' to describe the fetched revision
@type workdir: string
@param workdir: Used to indicate the destination of the copy of srcdir
@type storedir: string
@param storedir: where the old build dir gets moved to during a movecopy
@type layername: string
@param layername: Used in the yocto-autobuilder's movecopy as a way
of moving the old build directory to a unique area for outside cleanup/
review.
@type config: dict
@param config: Git configuration options to enable when running git
"""
if not getDescription and not isinstance(getDescription, dict):
getDescription = False
self.branch = branch
self.method = method
self.prog = progress
self.repourl = repourl.rstrip('/')
self.retryFetch = retryFetch
self.submodules = submodules
self.shallow = shallow
self.workdir = workdir
self.storedir = storedir
self.mirrordir = mirrordir
self.layername = layername
self.fetchcount = 0
self.clobberOnFailure = clobberOnFailure
self.mode = mode
self.getDescription = getDescription
self.config = config
self.timeout = 10*60
# We no longer pass srcdir in. There are way too many ways to hang
# yourself by doing that.
if self.mirrordir:
if self.method in ['barecopy', 'movecopy']:
self.srcdir='source/'+self.repourl
else:
if "poky" in self.layername or \
"oecore" in self.layername or \
"eclipse" in self.layername:
self.srcdir = "build"
else:
self.srcdir = 'build/'+self.layername
else:
self.srcdir = 'source'
if self.method in ['barecopy', 'movecopy']:
self.workdir='source/'+self.repourl
else:
self.workdir = 'build'
Source.__init__(self, **kwargs)
if self.mode not in ['incremental', 'full']:
bbconfig.error("Git: mode must be 'incremental' or 'full'.")
if not self.repourl:
bbconfig.error("Git: must provide repourl.")
if (self.mode == 'full' and
self.method not in ['clean', 'fresh', 'clobber', 'movecopy', 'barecopy', None]):
bbconfig.error("Git: invalid method for mode 'full'.")
if self.shallow and (self.mode != 'full' or self.method != 'clobber'):
bbconfig.error("Git: shallow only possible with mode 'full' and method 'clobber'.")
if not isinstance(self.getDescription, (bool, dict)):
bbconfig.error("Git: getDescription must be a boolean or a dict.")
def __init__(self,
repourl=None,
branch='HEAD',
mode='incremental',
method=None,
reference=None,
submodules=False,
shallow=False,
progress=False,
retryFetch=False,
clobberOnFailure=False,
getDescription=False,
config=None,
origin=None,
**kwargs):
"""
@type repourl: string
@param repourl: the URL which points at the git repository
@type branch: string
@param branch: The branch or tag to check out by default. If
a build specifies a different branch, it will
be used instead of this.
@type submodules: boolean
@param submodules: Whether or not to update (and initialize)
git submodules.
@type mode: string
@param mode: Type of checkout. Described in docs.
@type method: string
@param method: Full builds can be done is different ways. This parameter
specifies which method to use.
@type reference: string
@param reference: If available use a reference repo.
Uses `--reference` in git command. Refer `git clone --help`
@type progress: boolean
@param progress: Pass the --progress option when fetching. This
can solve long fetches getting killed due to
lack of output, but requires Git 1.7.2+.
@type shallow: boolean or integer
@param shallow: Use a shallow or clone, if possible
@type retryFetch: boolean
@param retryFetch: Retry fetching before failing source checkout.
@type getDescription: boolean or dict
@param getDescription: Use 'git describe' to describe the fetched revision
@type origin: string
@param origin: The name to give the remote when cloning (default None)
@type config: dict
@param config: Git configuration options to enable when running git
"""
if not getDescription and not isinstance(getDescription, dict):
getDescription = False
self.branch = branch
self.method = method
self.prog = progress
self.repourl = repourl
self.reference = reference
self.retryFetch = retryFetch
self.submodules = submodules
self.shallow = shallow
self.clobberOnFailure = clobberOnFailure
self.mode = mode
self.getDescription = getDescription
self.config = config
self.supportsBranch = True
self.supportsSubmoduleCheckout = True
self.srcdir = 'source'
self.origin = origin
Source.__init__(self, **kwargs)
if not self.repourl:
bbconfig.error("Git: must provide repourl.")
if isinstance(self.mode, string_types):
if not self._hasAttrGroupMember('mode', self.mode):
bbconfig.error(
"Git: mode must be %s" %
(' or '.join(self._listAttrGroupMembers('mode'))))
if isinstance(self.method, string_types):
if (self.mode == 'full' and self.method
not in ['clean', 'fresh', 'clobber', 'copy', None]):
bbconfig.error("Git: invalid method for mode 'full'.")
if self.shallow and (self.mode != 'full'
or self.method != 'clobber'):
bbconfig.error(
"Git: shallow only possible with mode 'full' and method 'clobber'."
)
if not isinstance(self.getDescription, (bool, dict)):
bbconfig.error("Git: getDescription must be a boolean or a dict.")
def __init__(self, repourl=None, branch='HEAD', mode='incremental', method=None,
reference=None, submodules=False, shallow=False, progress=False, retryFetch=False,
clobberOnFailure=False, getDescription=False, config=None,
origin=None, sshPrivateKey=None, sshHostKey=None, **kwargs):
"""
@type repourl: string
@param repourl: the URL which points at the git repository
@type branch: string
@param branch: The branch or tag to check out by default. If
a build specifies a different branch, it will
be used instead of this.
@type submodules: boolean
@param submodules: Whether or not to update (and initialize)
git submodules.
@type mode: string
@param mode: Type of checkout. Described in docs.
@type method: string
@param method: Full builds can be done is different ways. This parameter
specifies which method to use.
@type reference: string
@param reference: If available use a reference repo.
Uses `--reference` in git command. Refer `git clone --help`
@type progress: boolean
@param progress: Pass the --progress option when fetching. This
can solve long fetches getting killed due to
lack of output, but requires Git 1.7.2+.
@type shallow: boolean or integer
@param shallow: Use a shallow or clone, if possible
@type retryFetch: boolean
@param retryFetch: Retry fetching before failing source checkout.
@type getDescription: boolean or dict
@param getDescription: Use 'git describe' to describe the fetched revision
@type origin: string
@param origin: The name to give the remote when cloning (default None)
@type sshPrivateKey: Secret or string
@param sshPrivateKey: The private key to use when running git for fetch
operations. The ssh utility must be in the system
path in order to use this option. On Windows only
git distribution that embeds MINGW has been
tested (as of July 2017 the official distribution
is MINGW-based).
@type sshHostKey: Secret or string
@param sshHostKey: Specifies public host key to match when
authenticating with SSH public key authentication.
`sshPrivateKey` must be specified in order to use
this option. The host key must be in the form of
`<key type> <base64-encoded string>`,
e.g. `ssh-rsa AAAAB3N<...>FAaQ==`.
@type config: dict
@param config: Git configuration options to enable when running git
"""
if not getDescription and not isinstance(getDescription, dict):
getDescription = False
self.branch = branch
self.method = method
self.prog = progress
self.repourl = repourl
self.reference = reference
self.retryFetch = retryFetch
self.submodules = submodules
self.shallow = shallow
self.clobberOnFailure = clobberOnFailure
self.mode = mode
self.getDescription = getDescription
self.sshPrivateKey = sshPrivateKey
self.sshHostKey = sshHostKey
self.config = config
self.srcdir = 'source'
self.origin = origin
Source.__init__(self, **kwargs)
self.setupGitStep()
if isinstance(self.mode, string_types):
if not self._hasAttrGroupMember('mode', self.mode):
bbconfig.error("Git: mode must be %s" %
(' or '.join(self._listAttrGroupMembers('mode'))))
if isinstance(self.method, string_types):
if (self.mode == 'full' and self.method not in ['clean', 'fresh', 'clobber', 'copy', None]):
bbconfig.error("Git: invalid method for mode 'full'.")
if self.shallow and (self.mode != 'full' or self.method != 'clobber'):
bbconfig.error(
"Git: shallow only possible with mode 'full' and method 'clobber'.")
if not isinstance(self.getDescription, (bool, dict)):
bbconfig.error("Git: getDescription must be a boolean or a dict.")