def main():
par = argparse.ArgumentParser(usage='butterflow [options] [video]',
add_help=False)
req = par.add_argument_group('Required arguments')
gen = par.add_argument_group('General options')
dsp = par.add_argument_group('Display options')
vid = par.add_argument_group('Video options')
mux = par.add_argument_group('Muxing options')
fgr = par.add_argument_group('Advanced options')
req.add_argument('video', type=str, nargs='?', default=None,
help='Specify the input video')
gen.add_argument('-h', '--help', action='help',
help='Show this help message and exit')
gen.add_argument('--version', action='store_true',
help='Show program\'s version number and exit')
gen.add_argument('-d', '--devices', action='store_true',
help='Show detected OpenCL devices and exit')
gen.add_argument('-sw', action='store_true',
help='Set to force software rendering')
gen.add_argument('-c', '--cache', action='store_true',
help='Show cache information and exit')
gen.add_argument('--rm-cache', action='store_true',
help='Set to clear the cache and exit')
gen.add_argument('-prb', '--probe', action='store_true',
help='Show media file information and exit')
gen.add_argument('-v', '--verbosity', action='count',
help='Set to increase output verbosity')
gen.add_argument('-q', '--quiet', action='store_true',
help='Set to suppress console output')
dsp.add_argument('-p', '--show-preview', action='store_true',
help='Set to show video preview')
dsp.add_argument('-a', '--add-info', action='store_true',
help='Set to embed debugging info into the output video')
dsp.add_argument('-tt', '--text-type',
choices=['light', 'dark', 'stroke'],
default=settings['text_type'],
help='Specify text type for debugging info, '
'(default: %(default)s)')
dsp.add_argument('-mrk', '--mark-frames', action='store_true',
help='Set to mark interpolated frames')
vid.add_argument('-o', '--output-path', type=str,
default=settings['out_path'],
help='Specify path to the output video')
vid.add_argument('-r', '--playback-rate', type=str,
help='Specify the playback rate as an integer or a float '
'Fractional forms are acceptable, e.g., 24/1.001 is the '
'same as 23.976. To use a multiple of the source '
'video\'s rate, follow a number with `x`, e.g., "2x" '
'will double the frame rate. The original rate will be '
'used by default if nothing is specified.')
vid.add_argument('-s', '--subregions', type=str,
help='Specify rendering subregions in the form: '
'"a=TIME,b=TIME,TARGET=VALUE" where TARGET is either '
'`fps`, `dur`, `spd`. Valid TIME syntaxes are [hr:m:s], '
'[m:s], [s], [s.xxx], or `end`, which signifies to the '
'end the video. You can specify multiple subregions by '
'separating them with a colon `:`. A special subregion '
'format that conveniently describes the entire clip is '
'available in the form: "full,TARGET=VALUE".')
vid.add_argument('-k', '--keep-subregions', action='store_true',
help='Set to render subregions that are not explicitly '
'specified')
vid.add_argument('-vs', '--video-scale', type=str,
default=str(settings['video_scale']),
help='Specify output video size in the form: '
'"WIDTH:HEIGHT" or by using a factor. To keep the '
'aspect ratio only specify one component, either width '
'or height, and set the other component to -1, '
'(default: %(default)s)')
vid.add_argument('-l', '--lossless', action='store_true',
help='Set to use lossless encoding settings')
vid.add_argument('-sm', '--smooth-motion', action='store_true',
help='Set to tune for smooth motion. This mode yields '
'artifact-less frames by emphasizing blended frames over '
'warping pixels.')
mux.add_argument('-mux', action='store_true',
help='Set to mux the source audio with the output video')
fgr.add_argument('--fast-pyr', action='store_true',
help='Set to use fast pyramids')
fgr.add_argument('--pyr-scale', type=float,
default=settings['pyr_scale'],
help='Specify pyramid scale factor, '
'(default: %(default)s)')
fgr.add_argument('--levels', type=int,
default=settings['levels'],
help='Specify number of pyramid layers, '
'(default: %(default)s)')
fgr.add_argument('--winsize', type=int,
default=settings['winsize'],
help='Specify averaging window size, '
'(default: %(default)s)')
fgr.add_argument('--iters', type=int,
default=settings['iters'],
help='Specify number of iterations at each pyramid '
'level, (default: %(default)s)')
fgr.add_argument('--poly-n', type=int,
choices=settings['poly_n_choices'],
default=settings['poly_n'],
help='Specify size of pixel neighborhood, '
'(default: %(default)s)')
fgr.add_argument('--poly-s', type=float,
default=settings['poly_s'],
help='Specify standard deviation to smooth derivatives, '
'(default: %(default)s)')
fgr.add_argument('-ff', '--flow-filter', choices=['box', 'gaussian'],
default=settings['flow_filter'],
help='Specify which filter to use for optical flow '
'estimation, (default: %(default)s)')
for i, arg in enumerate(sys.argv):
if arg[0] == '-' and arg[1].isdigit():
sys.argv[i] = ' '+arg
args = par.parse_args()
fmt = '[butterflow:%(filename)s:%(funcName)s.%(levelname)s]: %(message)s'
logging.basicConfig(level=settings['loglevel_0'], format=fmt)
log = logging.getLogger('butterflow')
if args.verbosity == 1:
log.setLevel(settings['loglevel_1'])
if args.verbosity >= 2:
log.setLevel(settings['loglevel_2'])
if args.quiet:
log.setLevel(settings['loglevel_quiet'])
settings['quiet'] = True
if args.version:
print(__version__)
return 0
cachedir = settings['tempdir']
if args.cache:
nfiles = 0
sz = 0
for dirpath, dirnames, filenames in os.walk(cachedir):
if dirpath == settings['clbdir']:
continue
for filename in filenames:
nfiles += 1
fp = os.path.join(dirpath, filename)
sz += os.path.getsize(fp)
sz = sz / 1024.0**2
print('{} files, {:.2f} MB'.format(nfiles, sz))
print('cache @ '+cachedir)
return 0
if args.rm_cache:
if os.path.exists(cachedir):
import shutil
shutil.rmtree(cachedir)
print('cache deleted, done.')
return 0
if args.devices:
ocl.print_ocl_devices()
return 0
if not args.video:
print('no file specified, use: -h for help')
return 1
elif not os.path.exists(args.video):
print('file does not exist')
return 1
if args.probe:
avinfo.print_av_info(args.video)
return 0
extension = os.path.splitext(os.path.basename(args.output_path))[1].lower()
if extension[1:] != 'mp4':
print('bad out file extension')
return 0
av_info = avinfo.get_av_info(args.video)
use_sw_interpolate = args.sw or not ocl.compat_ocl_device_available()
if use_sw_interpolate:
log.warn('not using opencl, ctrl+c to quit')
if args.flow_filter == 'gaussian':
args.flow_filter = cv2.OPTFLOW_FARNEBACK_GAUSSIAN
else:
args.flow_filter = 0
if args.smooth_motion:
args.polys = 0.01
def optflow_fn(x, y,
pyr=args.pyr_scale, levels=args.levels,
winsize=args.winsize, iters=args.iters, polyn=args.poly_n,
polys=args.poly_s, fast=args.fast_pyr,
filt=args.flow_filter):
if use_sw_interpolate:
return cv2.calcOpticalFlowFarneback(
x, y, pyr, levels, winsize, iters, polyn, polys, filt)
else:
return motion.ocl_farneback_optical_flow(
x, y, pyr, levels, winsize, iters, polyn, polys, fast, filt)
interpolate_fn = None
if use_sw_interpolate:
from butterflow.interpolate import sw_interpolate_flow
interpolate_fn = sw_interpolate_flow
else:
interpolate_fn = motion.ocl_interpolate_flow
try:
w, h = w_h_from_input_str(args.video_scale, av_info['w'], av_info['h'])
sequence = sequence_from_input_str(args.subregions,
av_info['duration'],
av_info['frames'])
rate = rate_from_input_str(args.playback_rate, av_info['rate'])
except (ValueError, AttributeError) as error:
print('error: '+str(error))
return 1
def nearest_even_int(x):
return x & ~1
w1, h1 = av_info['w'], av_info['h']
w2, h2 = nearest_even_int(w), nearest_even_int(h)
if w1*h1 > w2*h2:
scaling_method = settings['scaler_dn']
elif w1*h1 < w2*h2:
scaling_method = settings['scaler_up']
else:
scaling_method = None
rnd = Renderer(args.video,
args.output_path,
sequence,
rate,
optflow_fn,
interpolate_fn,
w2,
h2,
scaling_method,
args.lossless,
args.keep_subregions,
args.show_preview,
args.add_info,
args.text_type,
args.mark_frames,
args.mux)
motion.set_num_threads(settings['ocv_threads'])
log.info('will render:\n' + str(rnd.sequence))
success = True
total_time = 0
try:
import timeit
total_time = timeit.timeit(rnd.render,
setup='import gc;gc.enable()',
number=1)
except (KeyboardInterrupt, SystemExit):
success = False
if success:
log.info('made: '+args.output_path)
out_sz = os.path.getsize(args.output_path) / 1024.0**2
log.info('write ratio: {}/{}, ({:.2f}%) {:.2f} MB'.format(
rnd.frs_written,
rnd.frs_to_render,
rnd.frs_written*100.0/rnd.frs_to_render,
out_sz))
txt = 'frames: {} real, +{} interpolated, +{} dupe, -{} drop'
if not settings['quiet']:
print(txt.format(rnd.source_frs,
rnd.frs_interpolated,
rnd.frs_duped,
rnd.frs_dropped))
log.info('butterflow took {:.3g} mins, done.'.format(total_time / 60))
return 0
else:
log.warn('quit unexpectedly')
log.warn('files left in cache @ '+settings['tempdir'])
return 1
def main():
par = argparse.ArgumentParser(usage='butterflow [options] [video]',
add_help=False)
req = par.add_argument_group('Required arguments')
gen = par.add_argument_group('General options')
dev = par.add_argument_group('Device options')
dsp = par.add_argument_group('Display options')
vid = par.add_argument_group('Video options')
mux = par.add_argument_group('Muxing options')
fgr = par.add_argument_group('Advanced options')
req.add_argument('video', type=str, nargs='?', default=None,
help='Specify the input video')
gen.add_argument('-h', '--help', action='help',
help='Show this help message and exit')
gen.add_argument('--version', action='store_true',
help='Show program\'s version number and exit')
gen.add_argument('--cache-dir', type=str,
help='Specify path to the cache directory')
gen.add_argument('-c', '--cache', action='store_true',
help='Show cache information and exit')
gen.add_argument('--rm-cache', action='store_true',
help='Set to clear the cache and exit')
gen.add_argument('-prb', '--probe', action='store_true',
help='Show media file information and exit')
gen.add_argument('-v', '--verbosity', action='count',
help='Set to increase output verbosity')
gen.add_argument('-q', '--quiet', action='store_true',
help='Set to suppress console output')
dev.add_argument('-d', '--show-devices', action='store_true',
help='Show detected OpenCL devices and exit')
dev.add_argument('-device', type=int,
default=-1,
help='Specify the preferred OpenCL device to use as an '
'integer. Device numbers can be listed with the `-d` '
'option. The device will be chosen automatically if '
'nothing is specified.')
dev.add_argument('-sw', action='store_true',
help='Set to force software rendering')
dsp.add_argument('-p', '--show-preview', action='store_true',
help='Set to show video preview')
dsp.add_argument('-e', '--embed-info', action='store_true',
help='Set to embed debugging info into the output video')
dsp.add_argument('-tt', '--text-type',
choices=['light', 'dark', 'stroke'],
default=settings['text_type'],
help='Specify text type for embedded debugging info, '
'(default: %(default)s)')
dsp.add_argument('-m', '--mark-frames', action='store_true',
help='Set to mark interpolated frames')
vid.add_argument('-o', '--output-path', type=str,
default=settings['out_path'],
help='Specify path to the output video')
vid.add_argument('-r', '--playback-rate', type=str,
help='Specify the playback rate as an integer or a float.'
' Fractional forms are acceptable, e.g., 24/1.001 is the '
'same as 23.976. To use a multiple of the source '
'video\'s rate, follow a number with `x`, e.g., "2x" '
'will double the frame rate. The original rate will be '
'used by default if nothing is specified.')
vid.add_argument('-s', '--subregions', type=str,
help='Specify rendering subregions in the form: '
'"a=TIME,b=TIME,TARGET=VALUE" where TARGET is either '
'`spd`, `dur`, `fps`. Valid TIME syntaxes are [hr:m:s], '
'[m:s], [s], [s.xxx], or `end`, which signifies to the '
'end the video. You can specify multiple subregions by '
'separating them with a colon `:`. A special subregion '
'format that conveniently describes the entire clip is '
'available in the form: "full,TARGET=VALUE".')
vid.add_argument('-k', '--keep-subregions', action='store_true',
help='Set to render subregions that are not explicitly '
'specified')
vid.add_argument('-vs', '--video-scale', type=str,
default=str(settings['video_scale']),
help='Specify output video size in the form: '
'"WIDTH:HEIGHT" or by using a factor. To keep the '
'aspect ratio only specify one component, either width '
'or height, and set the other component to -1, '
'(default: %(default)s)')
vid.add_argument('-l', '--lossless', action='store_true',
help='Set to use lossless encoding settings')
vid.add_argument('-sm', '--smooth-motion', action='store_true',
help='Set to tune for smooth motion. This mode yields '
'artifact-less frames by emphasizing blended frames over '
'warping pixels.')
mux.add_argument('-audio', action='store_true',
help='Set to add the source audio to the output video')
fgr.add_argument('--fast-pyr', action='store_true',
help='Set to use fast pyramids')
fgr.add_argument('--pyr-scale', type=float,
default=settings['pyr_scale'],
help='Specify pyramid scale factor, '
'(default: %(default)s)')
fgr.add_argument('--levels', type=int,
default=settings['levels'],
help='Specify number of pyramid layers, '
'(default: %(default)s)')
fgr.add_argument('--winsize', type=int,
default=settings['winsize'],
help='Specify averaging window size, '
'(default: %(default)s)')
fgr.add_argument('--iters', type=int,
default=settings['iters'],
help='Specify number of iterations at each pyramid '
'level, (default: %(default)s)')
fgr.add_argument('--poly-n', type=int,
choices=settings['poly_n_choices'],
default=settings['poly_n'],
help='Specify size of pixel neighborhood, '
'(default: %(default)s)')
fgr.add_argument('--poly-s', type=float,
default=settings['poly_s'],
help='Specify standard deviation to smooth derivatives, '
'(default: %(default)s)')
fgr.add_argument('-ff', '--flow-filter', choices=['box', 'gaussian'],
default=settings['flow_filter'],
help='Specify which filter to use for optical flow '
'estimation, (default: %(default)s)')
for i, arg in enumerate(sys.argv):
if arg[0] == '-' and arg[1].isdigit():
sys.argv[i] = ' '+arg
args = par.parse_args()
format = '[butterflow:%(levelname)s]: %(message)s'
logging.basicConfig(level=settings['loglevel_0'], format=format)
log = logging.getLogger('butterflow')
if args.verbosity == 1:
log.setLevel(settings['loglevel_1'])
if args.verbosity >= 2:
log.setLevel(settings['loglevel_2'])
if args.quiet:
log.setLevel(settings['loglevel_quiet'])
settings['quiet'] = True
if args.version:
print(__version__)
return 0
if args.cache_dir is not None:
cachedir = os.path.normpath(args.cache_dir)
if os.path.exists(cachedir):
if not os.path.isdir(cachedir):
print('Cache path is not a directory')
return 1
else:
os.makedirs(cachedir)
settings['tempdir'] = cachedir
settings['clbdir'] = os.path.join(cachedir, 'clb')
if not os.path.exists(settings['clbdir']):
os.makedirs(settings['clbdir'])
ocl.set_cache_path(settings['clbdir'] + os.sep)
cachedir = settings['tempdir']
cachedirs = []
tempfolder = os.path.dirname(cachedir)
for dirpath, dirnames, filenames in os.walk(tempfolder):
for d in dirnames:
if 'butterflow' in d:
if 'butterflow-'+__version__ not in d:
cachedirs.append(os.path.join(dirpath, d))
break
if args.cache:
nfiles = 0
sz = 0
for dirpath, dirnames, filenames in os.walk(cachedir):
if dirpath == settings['clbdir']:
continue
for filename in filenames:
nfiles += 1
fp = os.path.join(dirpath, filename)
sz += os.path.getsize(fp)
sz = sz / 1024.0**2
print('{} files, {:.2f} MB'.format(nfiles, sz))
print('Cache: '+cachedir)
return 0
if args.rm_cache:
cachedirs.append(cachedir)
for i, x in enumerate(cachedirs):
print('[{}] {}'.format(i, x))
choice = raw_input('Remove these directories? [y/N] ')
if choice != 'y':
print('Leaving the cache alone, done.')
return 0
for x in cachedirs:
if os.path.exists(x):
import shutil
shutil.rmtree(x)
print('Cache deleted, done.')
return 0
if args.show_devices:
ocl.print_ocl_devices()
return 0
if not args.video:
print('No file specified')
return 1
elif not os.path.exists(args.video):
print('File doesn\'t exist')
return 1
if args.probe:
avinfo.print_av_info(args.video)
return 0
av_info = avinfo.get_av_info(args.video)
if av_info['frames'] == 0:
print('Bad file with 0 frames')
return 1
extension = os.path.splitext(os.path.basename(args.output_path))[1].lower()
if extension[1:] != settings['v_container']:
print('Bad output file extension. Must be {}.'.format(
settings['v_container'].upper()))
return 0
if not args.sw and not ocl.compat_ocl_device_available():
print('No compatible OpenCL devices were detected. Must force software '
'rendering with the `-sw` flag to continue.')
return 1
log.info('Version '+__version__)
log.info('Cache directory:\t%s' % cachedir)
for x in cachedirs:
log.warn('Stale cache directory (delete with `--rm-cache`): %s' % x)
if not args.sw and ocl.compat_ocl_device_available():
log.info('At least one compatible OpenCL device was detected')
else:
log.warning('No compatible OpenCL devices were detected.')
if args.device != -1:
try:
ocl.select_ocl_device(args.device)
except IndexError as error:
print('Error: '+str(error))
return 1
except ValueError:
if not args.sw:
print('An incompatible device was selected.\n'
'Must force software rendering with the `-sw` flag to continue.')
return 1
s = "Using device: %s"
if args.device == -1:
s += " (autoselected)"
log.info(s % ocl.get_current_ocl_device_name())
use_sw_interpolate = args.sw
if args.flow_filter == 'gaussian':
args.flow_filter = cv2.OPTFLOW_FARNEBACK_GAUSSIAN
else:
args.flow_filter = 0
if args.smooth_motion:
args.poly_s = 0.01
def optflow_fn(x, y,
pyr=args.pyr_scale, levels=args.levels,
winsize=args.winsize, iters=args.iters, polyn=args.poly_n,
polys=args.poly_s, fast=args.fast_pyr,
filt=args.flow_filter):
if use_sw_interpolate:
return cv2.calcOpticalFlowFarneback(
x, y, pyr, levels, winsize, iters, polyn, polys, filt)
else:
return motion.ocl_farneback_optical_flow(
x, y, pyr, levels, winsize, iters, polyn, polys, fast, filt)
interpolate_fn = None
if use_sw_interpolate:
from butterflow.interpolate import sw_interpolate_flow
interpolate_fn = sw_interpolate_flow
log.warn("Hardware acceleration is disabled. Rendering will be slow. "
"Do Ctrl+c to quit or suspend the process with Ctrl+z and "
"then stop it with `kill %1`, etc. You can list suspended "
"processes with `jobs`.)")
else:
interpolate_fn = motion.ocl_interpolate_flow
log.info("Hardware acceleration is enabled")
try:
w, h = w_h_from_input_str(args.video_scale, av_info['w'], av_info['h'])
sequence = sequence_from_input_str(args.subregions,
av_info['duration'],
av_info['frames'])
rate = rate_from_input_str(args.playback_rate, av_info['rate'])
except (ValueError, AttributeError) as error:
print('Error: '+str(error))
return 1
def nearest_even_int(x, tag=""):
new_x = x & ~1
if x != new_x:
log.warn("%s: %d is not divisible by 2, setting to %d",
tag, x, new_x)
return new_x
w1, h1 = av_info['w'], av_info['h']
w2 = nearest_even_int(w, "W")
if w2 > 256:
if w2 % 4 > 0:
old_w2 = w2
w2 -= 2
w2 = max(w2, 0)
log.warn('W: %d > 256 but is not divisible by 4, setting to %d',
old_w2, w2)
h2 = nearest_even_int(h, "H")
if w1*h1 > w2*h2:
scaling_method = settings['scaler_dn']
elif w1*h1 < w2*h2:
scaling_method = settings['scaler_up']
else:
scaling_method = None
rnd = Renderer(args.video,
args.output_path,
sequence,
rate,
optflow_fn,
interpolate_fn,
w2,
h2,
scaling_method,
args.lossless,
args.keep_subregions,
args.show_preview,
args.embed_info,
args.text_type,
args.mark_frames,
args.audio)
ocl.set_num_threads(settings['ocv_threads'])
log.info('Rendering:')
added_rate = False
for x in str(rnd.sequence).split('\n'):
x = x.strip()
if not added_rate:
x += ', Rate={}'.format(av_info['rate'])
log.info(x)
added_rate = True
continue
if not args.keep_subregions and 'autogenerated' in x:
log.info(x[:-1]+ ', will skip when rendering)')
continue
log.info(x)
temp_subs = rnd.sequence.subregions
for x in rnd.sequence.subregions:
overlaps = False
for y in temp_subs:
if x is y:
continue
elif x.intersects(y):
overlaps = True
break
if overlaps:
log.warn('At least 1 subregion overlaps with another')
break
success = True
total_time = 0
try:
import timeit
total_time = timeit.timeit(rnd.render,
setup='import gc;gc.enable()',
number=1)
except (KeyboardInterrupt, SystemExit):
success = False
if success:
log_function = log.info
if rnd.frs_written > rnd.frs_to_render:
log_function = log.warn
log.warn('Unexpected write ratio')
log_function('Write ratio: {}/{}, ({:.2f}%)'.format(
rnd.frs_written,
rnd.frs_to_render,
rnd.frs_written*100.0/rnd.frs_to_render))
txt = 'Final output frames: {} source, +{} interpolated, +{} duped, -{} dropped'
if not settings['quiet']:
log.info(txt.format(rnd.source_frs,
rnd.frs_interpolated,
rnd.frs_duped,
rnd.frs_dropped))
old_sz = os.path.getsize(args.video) / 1024.0
new_sz = os.path.getsize(args.output_path) / 1024.0
log.info('Output file size:\t{:.2f} kB ({:.2f} kB)'.format(new_sz,
new_sz - old_sz))
log.info('Rendering took {:.3g} mins, done.'.format(total_time / 60))
return 0
else:
log.warn('Quit unexpectedly')
log.warn('Files were left in the cache @ '+settings['tempdir']+'.')
return 1
def main():
par = argparse.ArgumentParser(usage='butterflow [options] [video]',
add_help=False)
req = par.add_argument_group('Required arguments')
gen = par.add_argument_group('General options')
dsp = par.add_argument_group('Display options')
vid = par.add_argument_group('Video options')
mux = par.add_argument_group('Muxing options')
fgr = par.add_argument_group('Advanced options')
req.add_argument('video',
type=str,
nargs='?',
default=None,
help='Specify the input video')
gen.add_argument('-h',
'--help',
action='help',
help='Show this help message and exit')
gen.add_argument('--version',
action='store_true',
help='Show program\'s version number and exit')
gen.add_argument('-d',
'--devices',
action='store_true',
help='Show detected OpenCL devices and exit')
gen.add_argument('-sw',
action='store_true',
help='Set to force software rendering')
gen.add_argument('-c',
'--cache',
action='store_true',
help='Show cache information and exit')
gen.add_argument('--rm-cache',
action='store_true',
help='Set to clear the cache and exit')
gen.add_argument('-prb',
'--probe',
action='store_true',
help='Show media file information and exit')
gen.add_argument('-v',
'--verbose',
action='store_true',
help='Set to increase output verbosity')
dsp.add_argument('-np',
'--no-preview',
action='store_false',
help='Set to disable video preview')
dsp.add_argument('-a',
'--add-info',
action='store_true',
help='Set to embed debugging info into the output '
'video')
dsp.add_argument('-tt',
'--text-type',
choices=['light', 'dark', 'stroke'],
default=settings.default['text_type'],
help='Specify text type for debugging info, '
'(default: %(default)s)')
dsp.add_argument('-mrk',
'--mark-frames',
action='store_true',
help='Set to mark interpolated frames')
vid.add_argument('-o',
'--output-path',
type=str,
default=settings.default['out_path'],
help='Specify path to the output video')
vid.add_argument('-r',
'--playback-rate',
type=str,
help='Specify the playback rate as an integer or a '
'float. Fractional forms are acceptable. To use a '
'multiple of the source video\'s rate, follow a number '
'with `x`, e.g., "2x" will double the frame rate. The '
'original rate will be used by default if nothing is '
'specified.')
vid.add_argument('-s',
'--sub-regions',
type=str,
help='Specify rendering subregions in the form: '
'"a=TIME,b=TIME,TARGET=VALUE" where TARGET is either '
'`fps`, `dur`, `spd`. Valid TIME syntaxes are [hr:m:s], '
'[m:s], [s], [s.xxx], or `end`, which signifies to the '
'end the video. You can specify multiple subregions by '
'separating them with a colon `:`. A special region '
'format that conveniently describes the entire clip is '
'available in the form: "full,TARGET=VALUE".')
vid.add_argument('-t',
'--trim-regions',
action='store_true',
help='Set to trim subregions that are not explicitly '
'specified')
vid.add_argument('-vs',
'--video-scale',
type=str,
default=str(settings.default['video_scale']),
help='Specify output video size in the form: '
'"WIDTH:HEIGHT" or by using a factor. To keep the '
'aspect ratio only specify one component, either width '
'or height, and set the other component to -1, '
'(default: %(default)s)')
vid.add_argument('-l',
'--lossless',
action='store_true',
help='Set to use lossless encoding settings')
vid.add_argument('-sm',
'--smooth-motion',
action='store_true',
help='Set to tune for smooth motion. This mode favors '
'accurate and artifact-less frames above all and will '
'emphasize blending frames over warping pixels.')
mux.add_argument('-mux',
action='store_true',
help='Set to mux the source audio with the output video')
fgr.add_argument('--fast-pyr',
action='store_true',
help='Set to use fast pyramids')
fgr.add_argument('--pyr-scale',
type=float,
default=settings.default['pyr_scale'],
help='Specify pyramid scale factor, '
'(default: %(default)s)')
fgr.add_argument('--levels',
type=int,
default=settings.default['levels'],
help='Specify number of pyramid layers, '
'(default: %(default)s)')
fgr.add_argument('--winsize',
type=int,
default=settings.default['winsize'],
help='Specify averaging window size, '
'(default: %(default)s)')
fgr.add_argument('--iters',
type=int,
default=settings.default['iters'],
help='Specify number of iterations at each pyramid '
'level, (default: %(default)s)')
fgr.add_argument('--poly-n',
type=int,
choices=settings.default['poly_n_choices'],
default=settings.default['poly_n'],
help='Specify size of pixel neighborhood, '
'(default: %(default)s)')
fgr.add_argument('--poly-s',
type=float,
default=settings.default['poly_s'],
help='Specify standard deviation to smooth derivatives, '
'(default: %(default)s)')
fgr.add_argument('-ff',
'--flow-filter',
choices=['box', 'gaussian'],
default=settings.default['flow_filter'],
help='Specify which filter to use for optical flow '
'estimation, (default: %(default)s)')
# add a space to args that start with a `-` char to avoid an unexpected
# argument error. needed for the `--video-scale` option
for i, arg in enumerate(sys.argv):
if (arg[0] == '-') and arg[1].isdigit():
sys.argv[i] = ' ' + arg
args = par.parse_args()
import logging
logging.basicConfig(level=settings.default['loglevel_a'],
format='%(levelname)-7s: %(message)s')
log = logging.getLogger('butterflow')
if args.verbose:
log.setLevel(settings.default['loglevel_b'])
if args.version:
from butterflow.__init__ import __version__
print('butterflow version %s' % __version__)
return 0
if args.cache:
print_cache_info()
return 0
if args.rm_cache:
rm_cache()
print('cache deleted, done.')
return 0
if args.devices:
ocl.print_ocl_devices()
return 0
if args.video is None:
print(NO_VIDEO_SPECIFIED)
return 1
if not os.path.exists(args.video):
print('Error: file does not exist at path')
return 1
if args.probe:
if args.video:
try:
avinfo.print_av_info(args.video)
except Exception as e:
print('Error: %s' % e)
else:
print(NO_VIDEO_SPECIFIED)
return 0
try:
vid_info = avinfo.get_av_info(args.video)
except Exception as e:
print('Error: %s' % e)
return 1
if not vid_info['v_stream_exists']:
print('Error: no video stream detected')
return 1
try:
sequence = sequence_from_str(vid_info['duration'], vid_info['frames'],
args.sub_regions)
except Exception as e:
print('Bad subregion string: %s' % e)
return 1
src_rate = (vid_info['rate_n'] * 1.0 / vid_info['rate_d'])
try:
rate = rate_from_str(args.playback_rate, src_rate)
except Exception as e:
print('Bad playback rate: %s' % e)
return 1
if rate < src_rate:
log.warning('rate=%s < src_rate=%s', rate, src_rate)
try:
w, h = w_h_from_str(args.video_scale, vid_info['w'], vid_info['h'])
except Exception as e:
print('Bad video scale: %s' % e)
return 1
have_ocl = ocl.compat_ocl_device_available()
use_sw = args.sw or not have_ocl
if use_sw:
log.warning('not using opencl accelerated methods')
# make functions that will generate flows and interpolate frames
from cv2 import calcOpticalFlowFarneback as sw_optical_flow
farneback_method = sw_optical_flow if use_sw else \
motion.ocl_farneback_optical_flow
flags = 0
if args.flow_filter == 'gaussian':
import cv2
flags = cv2.OPTFLOW_FARNEBACK_GAUSSIAN
if args.smooth_motion:
args.poly_s = 0.01
# don't make the function with `lambda` because `draw_debug_text` will need
# to retrieve kwargs with the `inspect` module
def flow_function(x,
y,
pyr=args.pyr_scale,
l=args.levels,
w=args.winsize,
i=args.iters,
polyn=args.poly_n,
polys=args.poly_s,
fast=args.fast_pyr,
filt=flags):
if farneback_method == motion.ocl_farneback_optical_flow:
return farneback_method(x, y, pyr, l, w, i, polyn, polys, fast,
filt)
else:
return farneback_method(x, y, pyr, l, w, i, polyn, polys, filt)
from butterflow.interpolate import sw_interpolate_flow
interpolate_function = sw_interpolate_flow if use_sw else \
motion.ocl_interpolate_flow
renderer = Renderer(args.output_path, vid_info, sequence, rate,
flow_function, interpolate_function, w, h,
args.lossless, args.trim_regions, args.no_preview,
args.add_info, args.text_type, args.mark_frames,
args.mux)
motion.set_num_threads(settings.default['ocv_threads'])
try:
# time how long it takes to render. timeit will turn off gc, must turn
# it back on to maximize performance re-nable it in the setup function
import timeit
tot_time = timeit.timeit(renderer.render,
setup='import gc;gc.enable()',
number=1) # only run once
tot_time /= 60 # time in minutes
new_sz = human_sz(float(os.path.getsize(args.output_path)))
print('{} real, {} interpolated, {} duped, {} dropped'.format(
renderer.tot_src_frs, renderer.tot_frs_int, renderer.tot_frs_dup,
renderer.tot_frs_drp))
print('write ratio: {}/{}, ({:.2f}%) {}'.format(
renderer.tot_frs_wrt, renderer.tot_tgt_frs,
renderer.tot_frs_wrt * 100.0 / renderer.tot_tgt_frs, new_sz))
print('butterflow took {:.3g} minutes, done.'.format(tot_time))
except (KeyboardInterrupt, SystemExit):
log.warning('stopped early, files were left in the cache')
log.warning('recoverable @ {}'.format(settings.default['tmp_dir']))
return 1
except Exception:
return 1
def main():
par = argparse.ArgumentParser(usage='butterflow [options] [video]',
add_help=False)
req = par.add_argument_group('Required arguments')
gen = par.add_argument_group('General options')
dsp = par.add_argument_group('Display options')
vid = par.add_argument_group('Video options')
mux = par.add_argument_group('Muxing options')
fgr = par.add_argument_group('Advanced options')
req.add_argument('video',
type=str,
nargs='?',
default=None,
help='Specify the input video')
gen.add_argument('-h',
'--help',
action='help',
help='Show this help message and exit')
gen.add_argument('--version',
action='store_true',
help='Show program\'s version number and exit')
gen.add_argument('-d',
'--devices',
action='store_true',
help='Show detected OpenCL devices and exit')
gen.add_argument('-sw',
action='store_true',
help='Set to force software rendering')
gen.add_argument('-c',
'--cache',
action='store_true',
help='Show cache information and exit')
gen.add_argument('--rm-cache',
action='store_true',
help='Set to clear the cache and exit')
gen.add_argument('-prb',
'--probe',
action='store_true',
help='Show media file information and exit')
gen.add_argument('-v',
'--verbose',
action='store_true',
help='Set to increase output verbosity')
dsp.add_argument('-np',
'--no-preview',
action='store_false',
help='Set to disable video preview')
dsp.add_argument('-a',
'--add-info',
action='store_true',
help='Set to embed debugging info into the output video')
dsp.add_argument('-tt',
'--text-type',
choices=['light', 'dark', 'stroke'],
default=settings['text_type'],
help='Specify text type for debugging info, '
'(default: %(default)s)')
dsp.add_argument('-mrk',
'--mark-frames',
action='store_true',
help='Set to mark interpolated frames')
vid.add_argument('-o',
'--output-path',
type=str,
default=settings['out_path'],
help='Specify path to the output video')
vid.add_argument('-r',
'--playback-rate',
type=str,
help='Specify the playback rate as an integer or a '
'float. Fractional forms are acceptable. To use a '
'multiple of the source video\'s rate, follow a number '
'with `x`, e.g., "2x" will double the frame rate. The '
'original rate will be used by default if nothing is '
'specified.')
vid.add_argument('-s',
'--subregions',
type=str,
help='Specify rendering subregions in the form: '
'"a=TIME,b=TIME,TARGET=VALUE" where TARGET is either '
'`fps`, `dur`, `spd`. Valid TIME syntaxes are [hr:m:s], '
'[m:s], [s], [s.xxx], or `end`, which signifies to the '
'end the video. You can specify multiple subregions by '
'separating them with a colon `:`. A special subregion '
'format that conveniently describes the entire clip is '
'available in the form: "full,TARGET=VALUE".')
vid.add_argument('-t',
'--trim-subregions',
action='store_true',
help='Set to trim subregions that are not explicitly '
'specified')
vid.add_argument('-vs',
'--video-scale',
type=str,
default=str(settings['video_scale']),
help='Specify output video size in the form: '
'"WIDTH:HEIGHT" or by using a factor. To keep the '
'aspect ratio only specify one component, either width '
'or height, and set the other component to -1, '
'(default: %(default)s)')
vid.add_argument('-l',
'--lossless',
action='store_true',
help='Set to use lossless encoding settings')
vid.add_argument('-sm',
'--smooth-motion',
action='store_true',
help='Set to tune for smooth motion. This mode favors '
'accurate and artifact-less frames above all and will '
'emphasize blending frames over warping pixels.')
mux.add_argument('-mux',
action='store_true',
help='Set to mux the source audio with the output video')
fgr.add_argument('--fast-pyr',
action='store_true',
help='Set to use fast pyramids')
fgr.add_argument('--pyr-scale',
type=float,
default=settings['pyr_scale'],
help='Specify pyramid scale factor, '
'(default: %(default)s)')
fgr.add_argument('--levels',
type=int,
default=settings['levels'],
help='Specify number of pyramid layers, '
'(default: %(default)s)')
fgr.add_argument('--winsize',
type=int,
default=settings['winsize'],
help='Specify averaging window size, '
'(default: %(default)s)')
fgr.add_argument('--iters',
type=int,
default=settings['iters'],
help='Specify number of iterations at each pyramid '
'level, (default: %(default)s)')
fgr.add_argument('--poly-n',
type=int,
choices=settings['poly_n_choices'],
default=settings['poly_n'],
help='Specify size of pixel neighborhood, '
'(default: %(default)s)')
fgr.add_argument('--poly-s',
type=float,
default=settings['poly_s'],
help='Specify standard deviation to smooth derivatives, '
'(default: %(default)s)')
fgr.add_argument('-ff',
'--flow-filter',
choices=['box', 'gaussian'],
default=settings['flow_filter'],
help='Specify which filter to use for optical flow '
'estimation, (default: %(default)s)')
for i, arg in enumerate(sys.argv):
if arg[0] == '-' and arg[1].isdigit(): # accept args w/ - for -vs
sys.argv[i] = ' ' + arg
args = par.parse_args()
logging.basicConfig(level=settings['loglevel_a'],
format='[butterflow.%(levelname)s]: %(message)s')
log = logging.getLogger('butterflow')
if args.verbose:
log.setLevel(settings['loglevel_b'])
if args.version:
from butterflow.__init__ import __version__
print('butterflow version {}'.format(__version__))
return 0
cachedir = settings['tempdir']
if args.cache:
nfiles = 0
sz = 0
for dirpath, dirnames, fnames in os.walk(cachedir):
if dirpath == settings['clbdir']:
continue
for fname in fnames:
nfiles += 1
fp = os.path.join(dirpath, fname)
sz += os.path.getsize(fp)
sz = sz / 1024.0**2
print('{} files, {:.2f} MB'.format(nfiles, sz))
print('cache @ ' + cachedir)
return 0
if args.rm_cache:
if os.path.exists(cachedir):
import shutil
shutil.rmtree(cachedir)
print('cache deleted, done.')
return 0
if args.devices:
ocl.print_ocl_devices()
return 0
if not args.video:
print('no file specified')
return 1
elif not os.path.exists(args.video):
print('file does not exist')
return 1
if args.probe:
avinfo.print_av_info(args.video)
return 0
av_info = avinfo.get_av_info(args.video)
if args.flow_filter == 'gaussian':
args.flow_filter = cv2.OPTFLOW_FARNEBACK_GAUSSIAN
else:
args.flow_filter = 0
if args.smooth_motion:
args.polys = 0.01
use_sw_inter = args.sw or not ocl.compat_ocl_device_available()
if use_sw_inter:
log.warn('not using opencl, ctrl+c to quit')
def flow_fn(x,
y,
pyr=args.pyr_scale,
levels=args.levels,
winsize=args.winsize,
iters=args.iters,
polyn=args.poly_n,
polys=args.poly_s,
fast=args.fast_pyr,
filt=args.flow_filter):
if use_sw_inter:
return cv2.calcOpticalFlowFarneback(x, y, pyr, levels, winsize,
iters, polyn, polys, filt)
else:
return motion.ocl_farneback_optical_flow(x, y, pyr, levels,
winsize, iters, polyn,
polys, fast, filt)
inter_fn = None
if use_sw_inter:
from butterflow.interpolate import sw_interpolate_flow
inter_fn = sw_interpolate_flow
else:
inter_fn = motion.ocl_interpolate_flow
w, h = w_h_from_input_str(args.video_scale, av_info['w'], av_info['h'])
def mk_even(x):
return x & ~1
w = mk_even(w)
h = mk_even(h)
rnd = Renderer(
args.video, args.output_path,
sequence_from_input_str(args.subregions, av_info['duration'],
av_info['frames']),
rate_from_input_str(args.playback_rate, av_info['rate']), flow_fn,
inter_fn, w, h, args.lossless, args.trim_subregions, args.no_preview,
args.add_info, args.text_type, args.mark_frames, args.mux)
motion.set_num_threads(settings['ocv_threads'])
log.info('Will render:\n' + str(rnd.sequence))
success = True
total_time = 0
try:
import timeit
total_time = timeit.timeit(rnd.render_video,
setup='import gc;gc.enable()',
number=1)
except (KeyboardInterrupt, SystemExit):
success = False
if success:
log.debug('Made: ' + args.output_path)
out_sz = os.path.getsize(args.output_path) / 1024.0**2
log.debug('Write ratio: {}/{}, ({:.2f}%) {:.2f} MB'.format(
rnd.tot_frs_wrt, rnd.tot_tgt_frs,
rnd.tot_frs_wrt * 100.0 / rnd.tot_tgt_frs, out_sz))
print('Frames: {} real, {} interpolated, {} duped, {} dropped'.format(
rnd.tot_src_frs, rnd.tot_frs_int, rnd.tot_frs_dup,
rnd.tot_frs_drp))
print('butterflow took {:.3g} mins, done.'.format(total_time / 60))
return 0
else:
log.warn('files left in cache @ ' + settings['tempdir'])
return 1
def main():
par = argparse.ArgumentParser(usage='butterflow [options] [video]',
add_help=False)
req = par.add_argument_group('Required arguments')
gen = par.add_argument_group('General options')
dsp = par.add_argument_group('Display options')
vid = par.add_argument_group('Video options')
mux = par.add_argument_group('Muxing options')
fgr = par.add_argument_group('Advanced options')
req.add_argument('video', type=str, nargs='?', default=None,
help='Specify the input video')
gen.add_argument('-h', '--help', action='help',
help='Show this help message and exit')
gen.add_argument('--version', action='store_true',
help='Show program\'s version number and exit')
gen.add_argument('-d', '--devices', action='store_true',
help='Show detected OpenCL devices and exit')
gen.add_argument('-sw', action='store_true',
help='Set to force software rendering')
gen.add_argument('-c', '--cache', action='store_true',
help='Show cache information and exit')
gen.add_argument('--rm-cache', action='store_true',
help='Set to clear the cache and exit')
gen.add_argument('-prb', '--probe', action='store_true',
help='Show media file information and exit')
gen.add_argument('-v', '--verbose', action='store_true',
help='Set to increase output verbosity')
dsp.add_argument('-np', '--no-preview', action='store_false',
help='Set to disable video preview')
dsp.add_argument('-a', '--add-info', action='store_true',
help='Set to embed debugging info into the output '
'video')
dsp.add_argument('-tt', '--text-type',
choices=['light', 'dark', 'stroke'],
default=settings.default['text_type'],
help='Specify text type for debugging info, '
'(default: %(default)s)')
dsp.add_argument('-mrk', '--mark-frames', action='store_true',
help='Set to mark interpolated frames')
vid.add_argument('-o', '--output-path', type=str,
default=settings.default['out_path'],
help='Specify path to the output video')
vid.add_argument('-r', '--playback-rate', type=str,
help='Specify the playback rate as an integer or a '
'float. Fractional forms are acceptable. To use a '
'multiple of the source video\'s rate, follow a number '
'with `x`, e.g., "2x" will double the frame rate. The '
'original rate will be used by default if nothing is '
'specified.')
vid.add_argument('-s', '--sub-regions', type=str,
help='Specify rendering subregions in the form: '
'"a=TIME,b=TIME,TARGET=VALUE" where TARGET is either '
'`fps`, `dur`, `spd`. Valid TIME syntaxes are [hr:m:s], '
'[m:s], [s], [s.xxx], or `end`, which signifies to the '
'end the video. You can specify multiple subregions by '
'separating them with a colon `:`. A special region '
'format that conveniently describes the entire clip is '
'available in the form: "full,TARGET=VALUE".')
vid.add_argument('-t', '--trim-regions', action='store_true',
help='Set to trim subregions that are not explicitly '
'specified')
vid.add_argument('-vs', '--video-scale', type=str,
default=str(settings.default['video_scale']),
help='Specify output video size in the form: '
'"WIDTH:HEIGHT" or by using a factor. To keep the '
'aspect ratio only specify one component, either width '
'or height, and set the other component to -1, '
'(default: %(default)s)')
vid.add_argument('-l', '--lossless', action='store_true',
help='Set to use lossless encoding settings')
vid.add_argument('-sm', '--smooth-motion', action='store_true',
help='Set to tune for smooth motion. This mode favors '
'accurate and artifact-less frames above all and will '
'emphasize blending frames over warping pixels.')
mux.add_argument('-mux', action='store_true',
help='Set to mux the source audio with the output video')
fgr.add_argument('--fast-pyr', action='store_true',
help='Set to use fast pyramids')
fgr.add_argument('--pyr-scale', type=float,
default=settings.default['pyr_scale'],
help='Specify pyramid scale factor, '
'(default: %(default)s)')
fgr.add_argument('--levels', type=int,
default=settings.default['levels'],
help='Specify number of pyramid layers, '
'(default: %(default)s)')
fgr.add_argument('--winsize', type=int,
default=settings.default['winsize'],
help='Specify averaging window size, '
'(default: %(default)s)')
fgr.add_argument('--iters', type=int,
default=settings.default['iters'],
help='Specify number of iterations at each pyramid '
'level, (default: %(default)s)')
fgr.add_argument('--poly-n', type=int,
choices=settings.default['poly_n_choices'],
default=settings.default['poly_n'],
help='Specify size of pixel neighborhood, '
'(default: %(default)s)')
fgr.add_argument('--poly-s', type=float,
default=settings.default['poly_s'],
help='Specify standard deviation to smooth derivatives, '
'(default: %(default)s)')
fgr.add_argument('-ff', '--flow-filter', choices=['box', 'gaussian'],
default=settings.default['flow_filter'],
help='Specify which filter to use for optical flow '
'estimation, (default: %(default)s)')
# add a space to args that start with a `-` char to avoid an unexpected
# argument error. needed for the `--video-scale` option
for i, arg in enumerate(sys.argv):
if (arg[0] == '-') and arg[1].isdigit():
sys.argv[i] = ' ' + arg
args = par.parse_args()
import logging
logging.basicConfig(level=settings.default['loglevel_a'],
format='%(levelname)-7s: %(message)s')
log = logging.getLogger('butterflow')
if args.verbose:
log.setLevel(settings.default['loglevel_b'])
if args.version:
from butterflow.__init__ import __version__
print('butterflow version %s' % __version__)
return 0
if args.cache:
print_cache_info()
return 0
if args.rm_cache:
rm_cache()
print('cache deleted, done.')
return 0
if args.devices:
ocl.print_ocl_devices()
return 0
if args.video is None:
print(NO_VIDEO_SPECIFIED)
return 1
if not os.path.exists(args.video):
print('Error: file does not exist at path')
return 1
if args.probe:
if args.video:
try:
avinfo.print_av_info(args.video)
except Exception as e:
print('Error: %s' % e)
else:
print(NO_VIDEO_SPECIFIED)
return 0
try:
vid_info = avinfo.get_av_info(args.video)
except Exception as e:
print('Error: %s' % e)
return 1
if not vid_info['v_stream_exists']:
print('Error: no video stream detected')
return 1
try:
sequence = sequence_from_str(vid_info['duration'],
vid_info['frames'], args.sub_regions)
except Exception as e:
print('Bad subregion string: %s' % e)
return 1
src_rate = (vid_info['rate_n'] * 1.0 /
vid_info['rate_d'])
try:
rate = rate_from_str(args.playback_rate, src_rate)
except Exception as e:
print('Bad playback rate: %s' % e)
return 1
if rate < src_rate:
log.warning('rate=%s < src_rate=%s', rate, src_rate)
try:
w, h = w_h_from_str(args.video_scale, vid_info['w'], vid_info['h'])
except Exception as e:
print('Bad video scale: %s' % e)
return 1
have_ocl = ocl.compat_ocl_device_available()
use_sw = args.sw or not have_ocl
if use_sw:
log.warning('not using opencl accelerated methods')
# make functions that will generate flows and interpolate frames
from cv2 import calcOpticalFlowFarneback as sw_optical_flow
farneback_method = sw_optical_flow if use_sw else \
motion.ocl_farneback_optical_flow
flags = 0
if args.flow_filter == 'gaussian':
import cv2
flags = cv2.OPTFLOW_FARNEBACK_GAUSSIAN
if args.smooth_motion:
args.poly_s = 0.01
# don't make the function with `lambda` because `draw_debug_text` will need
# to retrieve kwargs with the `inspect` module
def flow_function(x, y, pyr=args.pyr_scale, l=args.levels, w=args.winsize,
i=args.iters, polyn=args.poly_n, polys=args.poly_s,
fast=args.fast_pyr, filt=flags):
if farneback_method == motion.ocl_farneback_optical_flow:
return farneback_method(x, y, pyr, l, w, i, polyn, polys, fast, filt)
else:
return farneback_method(x, y, pyr, l, w, i, polyn, polys, filt)
from butterflow.interpolate import sw_interpolate_flow
interpolate_function = sw_interpolate_flow if use_sw else \
motion.ocl_interpolate_flow
renderer = Renderer(
args.output_path,
vid_info,
sequence,
rate,
flow_function,
interpolate_function,
w,
h,
args.lossless,
args.trim_regions,
args.no_preview,
args.add_info,
args.text_type,
args.mark_frames,
args.mux)
motion.set_num_threads(settings.default['ocv_threads'])
try:
# time how long it takes to render. timeit will turn off gc, must turn
# it back on to maximize performance re-nable it in the setup function
import timeit
tot_time = timeit.timeit(renderer.render,
setup='import gc;gc.enable()',
number=1) # only run once
tot_time /= 60 # time in minutes
new_sz = human_sz(float(os.path.getsize(args.output_path)))
print('{} real, {} interpolated, {} duped, {} dropped'.format(
renderer.tot_src_frs,
renderer.tot_frs_int,
renderer.tot_frs_dup,
renderer.tot_frs_drp))
print('write ratio: {}/{}, ({:.2f}%) {}'.format(
renderer.tot_frs_wrt,
renderer.tot_tgt_frs,
renderer.tot_frs_wrt * 100.0 / renderer.tot_tgt_frs,
new_sz))
print('butterflow took {:.3g} minutes, done.'.format(tot_time))
except (KeyboardInterrupt, SystemExit):
log.warning('stopped early, files were left in the cache')
log.warning('recoverable @ {}'.format(settings.default['tmp_dir']))
return 1
except Exception:
return 1