def test_to_bytecode(self):
# if test:
# x = 2
# x = 5
blocks = ControlFlowGraph()
blocks.add_block()
blocks.add_block()
blocks[0].extend([Instr('LOAD_NAME', 'test', lineno=1),
Instr('POP_JUMP_IF_FALSE', blocks[2], lineno=1)])
blocks[1].extend([Instr('LOAD_CONST', 5, lineno=2),
Instr('STORE_NAME', 'x', lineno=2),
Instr('JUMP_FORWARD', blocks[2], lineno=2)])
blocks[2].extend([Instr('LOAD_CONST', 7, lineno=3),
Instr('STORE_NAME', 'x', lineno=3),
Instr('LOAD_CONST', None, lineno=3),
Instr('RETURN_VALUE', lineno=3)])
bytecode = blocks.to_bytecode()
label = Label()
self.assertEqual(bytecode,
[Instr('LOAD_NAME', 'test', lineno=1),
Instr('POP_JUMP_IF_FALSE', label, lineno=1),
Instr('LOAD_CONST', 5, lineno=2),
Instr('STORE_NAME', 'x', lineno=2),
Instr('JUMP_FORWARD', label, lineno=2),
label,
Instr('LOAD_CONST', 7, lineno=3),
Instr('STORE_NAME', 'x', lineno=3),
Instr('LOAD_CONST', None, lineno=3),
Instr('RETURN_VALUE', lineno=3)])
def test_return_value(self):
# return+return: remove second return
#
# def func():
# return 4
# return 5
code = Bytecode([
Instr('LOAD_CONST', 4, lineno=2),
Instr('RETURN_VALUE', lineno=2),
Instr('LOAD_CONST', 5, lineno=3),
Instr('RETURN_VALUE', lineno=3)
])
code = ControlFlowGraph.from_bytecode(code)
self.check(code, Instr('LOAD_CONST', 4, lineno=2),
Instr('RETURN_VALUE', lineno=2))
# return+return + return+return: remove second and fourth return
#
# def func():
# return 4
# return 5
# return 6
# return 7
code = Bytecode([
Instr('LOAD_CONST', 4, lineno=2),
Instr('RETURN_VALUE', lineno=2),
Instr('LOAD_CONST', 5, lineno=3),
Instr('RETURN_VALUE', lineno=3),
Instr('LOAD_CONST', 6, lineno=4),
Instr('RETURN_VALUE', lineno=4),
Instr('LOAD_CONST', 7, lineno=5),
Instr('RETURN_VALUE', lineno=5)
])
code = ControlFlowGraph.from_bytecode(code)
self.check(code, Instr('LOAD_CONST', 4, lineno=2),
Instr('RETURN_VALUE', lineno=2))
# return + JUMP_ABSOLUTE: remove JUMP_ABSOLUTE
# while 1:
# return 7
setup_loop = Label()
return_label = Label()
code = Bytecode([
setup_loop,
Instr('SETUP_LOOP', return_label, lineno=2),
Instr('LOAD_CONST', 7, lineno=3),
Instr('RETURN_VALUE', lineno=3),
Instr('JUMP_ABSOLUTE', setup_loop, lineno=3),
Instr('POP_BLOCK', lineno=3), return_label,
Instr('LOAD_CONST', None, lineno=3),
Instr('RETURN_VALUE', lineno=3)
])
code = ControlFlowGraph.from_bytecode(code)
end_loop = Label()
self.check(code, Instr('SETUP_LOOP', end_loop, lineno=2),
Instr('LOAD_CONST', 7, lineno=3),
Instr('RETURN_VALUE', lineno=3), end_loop,
Instr('LOAD_CONST', None, lineno=3),
Instr('RETURN_VALUE', lineno=3))
def test_to_bytecode(self):
# if test:
# x = 2
# x = 5
blocks = ControlFlowGraph()
blocks.add_block()
blocks.add_block()
blocks[0].extend([Instr('LOAD_NAME', 'test', lineno=1),
Instr('POP_JUMP_IF_FALSE', blocks[2], lineno=1)])
blocks[1].extend([Instr('LOAD_CONST', 5, lineno=2),
Instr('STORE_NAME', 'x', lineno=2),
Instr('JUMP_FORWARD', blocks[2], lineno=2)])
blocks[2].extend([Instr('LOAD_CONST', 7, lineno=3),
Instr('STORE_NAME', 'x', lineno=3),
Instr('LOAD_CONST', None, lineno=3),
Instr('RETURN_VALUE', lineno=3)])
bytecode = blocks.to_bytecode()
label = Label()
self.assertEqual(bytecode,
[Instr('LOAD_NAME', 'test', lineno=1),
Instr('POP_JUMP_IF_FALSE', label, lineno=1),
Instr('LOAD_CONST', 5, lineno=2),
Instr('STORE_NAME', 'x', lineno=2),
Instr('JUMP_FORWARD', label, lineno=2),
label,
Instr('LOAD_CONST', 7, lineno=3),
Instr('STORE_NAME', 'x', lineno=3),
Instr('LOAD_CONST', None, lineno=3),
Instr('RETURN_VALUE', lineno=3)])
def test_return_value(self):
# return+return: remove second return
#
# def func():
# return 4
# return 5
code = Bytecode([Instr('LOAD_CONST', 4, lineno=2),
Instr('RETURN_VALUE', lineno=2),
Instr('LOAD_CONST', 5, lineno=3),
Instr('RETURN_VALUE', lineno=3)])
code = ControlFlowGraph.from_bytecode(code)
self.check(code,
Instr('LOAD_CONST', 4, lineno=2),
Instr('RETURN_VALUE', lineno=2))
# return+return + return+return: remove second and fourth return
#
# def func():
# return 4
# return 5
# return 6
# return 7
code = Bytecode([Instr('LOAD_CONST', 4, lineno=2),
Instr('RETURN_VALUE', lineno=2),
Instr('LOAD_CONST', 5, lineno=3),
Instr('RETURN_VALUE', lineno=3),
Instr('LOAD_CONST', 6, lineno=4),
Instr('RETURN_VALUE', lineno=4),
Instr('LOAD_CONST', 7, lineno=5),
Instr('RETURN_VALUE', lineno=5)])
code = ControlFlowGraph.from_bytecode(code)
self.check(code,
Instr('LOAD_CONST', 4, lineno=2),
Instr('RETURN_VALUE', lineno=2))
# return + JUMP_ABSOLUTE: remove JUMP_ABSOLUTE
# while 1:
# return 7
setup_loop = Label()
return_label = Label()
code = Bytecode([setup_loop,
Instr('SETUP_LOOP', return_label, lineno=2),
Instr('LOAD_CONST', 7, lineno=3),
Instr('RETURN_VALUE', lineno=3),
Instr('JUMP_ABSOLUTE', setup_loop, lineno=3),
Instr('POP_BLOCK', lineno=3),
return_label,
Instr('LOAD_CONST', None, lineno=3),
Instr('RETURN_VALUE', lineno=3)])
code = ControlFlowGraph.from_bytecode(code)
end_loop = Label()
self.check(code,
Instr('SETUP_LOOP', end_loop, lineno=2),
Instr('LOAD_CONST', 7, lineno=3),
Instr('RETURN_VALUE', lineno=3),
end_loop,
Instr('LOAD_CONST', None, lineno=3),
Instr('RETURN_VALUE', lineno=3))
def test_get_block_index(self):
blocks = ControlFlowGraph()
block0 = blocks[0]
block1 = blocks.add_block()
block2 = blocks.add_block()
self.assertEqual(blocks.get_block_index(block0), 0)
self.assertEqual(blocks.get_block_index(block1), 1)
self.assertEqual(blocks.get_block_index(block2), 2)
other_block = BasicBlock()
self.assertRaises(ValueError, blocks.get_block_index, other_block)
def test_get_block_index(self):
blocks = ControlFlowGraph()
block0 = blocks[0]
block1 = blocks.add_block()
block2 = blocks.add_block()
self.assertEqual(blocks.get_block_index(block0), 0)
self.assertEqual(blocks.get_block_index(block1), 1)
self.assertEqual(blocks.get_block_index(block2), 2)
other_block = BasicBlock()
self.assertRaises(ValueError, blocks.get_block_index, other_block)
def test_to_bytecode(self):
# if test:
# x = 2
# x = 5
blocks = ControlFlowGraph()
blocks.add_block()
blocks.add_block()
blocks[0].extend(
[
Instr("LOAD_NAME", "test", lineno=1),
Instr("POP_JUMP_IF_FALSE", blocks[2], lineno=1),
]
)
blocks[1].extend(
[
Instr("LOAD_CONST", 5, lineno=2),
Instr("STORE_NAME", "x", lineno=2),
Instr("JUMP_FORWARD", blocks[2], lineno=2),
]
)
blocks[2].extend(
[
Instr("LOAD_CONST", 7, lineno=3),
Instr("STORE_NAME", "x", lineno=3),
Instr("LOAD_CONST", None, lineno=3),
Instr("RETURN_VALUE", lineno=3),
]
)
bytecode = blocks.to_bytecode()
label = Label()
self.assertEqual(
bytecode,
[
Instr("LOAD_NAME", "test", lineno=1),
Instr("POP_JUMP_IF_FALSE", label, lineno=1),
Instr("LOAD_CONST", 5, lineno=2),
Instr("STORE_NAME", "x", lineno=2),
Instr("JUMP_FORWARD", label, lineno=2),
label,
Instr("LOAD_CONST", 7, lineno=3),
Instr("STORE_NAME", "x", lineno=3),
Instr("LOAD_CONST", None, lineno=3),
Instr("RETURN_VALUE", lineno=3),
],
)
def test_setlineno(self):
# x = 7
# y = 8
# z = 9
code = Bytecode()
code.first_lineno = 3
code.extend([Instr("LOAD_CONST", 7),
Instr("STORE_NAME", 'x'),
SetLineno(4),
Instr("LOAD_CONST", 8),
Instr("STORE_NAME", 'y'),
SetLineno(5),
Instr("LOAD_CONST", 9),
Instr("STORE_NAME", 'z')])
blocks = ControlFlowGraph.from_bytecode(code)
self.assertBlocksEqual(blocks,
[Instr("LOAD_CONST", 7),
Instr("STORE_NAME", 'x'),
SetLineno(4),
Instr("LOAD_CONST", 8),
Instr("STORE_NAME", 'y'),
SetLineno(5),
Instr("LOAD_CONST", 9),
Instr("STORE_NAME", 'z')])
def test_from_bytecode(self):
bytecode = Bytecode()
label = Label()
bytecode.extend([Instr('LOAD_NAME', 'test', lineno=1),
Instr('POP_JUMP_IF_FALSE', label, lineno=1),
Instr('LOAD_CONST', 5, lineno=2),
Instr('STORE_NAME', 'x', lineno=2),
Instr('JUMP_FORWARD', label, lineno=2),
# dead code!
Instr('LOAD_CONST', 7, lineno=4),
Instr('STORE_NAME', 'x', lineno=4),
Label(), # unused label
label,
Label(), # unused label
Instr('LOAD_CONST', None, lineno=4),
Instr('RETURN_VALUE', lineno=4)])
blocks = ControlFlowGraph.from_bytecode(bytecode)
label2 = blocks[3]
self.assertBlocksEqual(blocks,
[Instr('LOAD_NAME', 'test', lineno=1),
Instr('POP_JUMP_IF_FALSE', label2, lineno=1)],
[Instr('LOAD_CONST', 5, lineno=2),
Instr('STORE_NAME', 'x', lineno=2),
Instr('JUMP_FORWARD', label2, lineno=2)],
[Instr('LOAD_CONST', 7, lineno=4),
Instr('STORE_NAME', 'x', lineno=4)],
[Instr('LOAD_CONST', None, lineno=4),
Instr('RETURN_VALUE', lineno=4)])
def check_dont_optimize(self, code):
code = ControlFlowGraph.from_bytecode(code)
noopt = code.to_bytecode()
optim = self.optimize_blocks(code)
optim = optim.to_bytecode()
self.assertEqual(optim, noopt)
def _create_consecutive_blocks(bytecode_cfg: ControlFlowGraph,
first: BasicBlock,
amount: int) -> Tuple[BasicBlock, ...]:
"""Split the given basic block into more blocks.
The blocks are consecutive in the list of basic blocks.
Args:
bytecode_cfg: The control-flow graph
first: The first basic block
amount: The amount of consecutive blocks that should be created.
Returns:
A tuple of consecutive basic blocks
"""
assert amount > 0, "Amount of created basic blocks must be positive."
current: BasicBlock = first
nodes: List[BasicBlock] = []
# Can be any instruction, as it is discarded anyway.
dummy_instruction = Instr("POP_TOP")
for _ in range(amount):
# Insert dummy instruction, which we can use to split off another block
current.insert(0, dummy_instruction)
current = bytecode_cfg.split_block(current, 1)
nodes.append(current)
# Move instructions back to first block.
first.clear()
first.extend(current)
# Clear instructions in all created blocks.
for node in nodes:
node.clear()
return tuple(nodes)
def test_add_del_block(self):
code = ControlFlowGraph()
code[0].append(Instr("LOAD_CONST", 0))
block = code.add_block()
self.assertEqual(len(code), 2)
self.assertIs(block, code[1])
code[1].append(Instr("LOAD_CONST", 2))
self.assertBlocksEqual(code, [Instr("LOAD_CONST", 0)], [Instr("LOAD_CONST", 2)])
del code[0]
self.assertBlocksEqual(code, [Instr("LOAD_CONST", 2)])
del code[0]
self.assertEqual(len(code), 0)
def code_info(cls, code: Bytecode, *, debug_passes=()) -> PyCodeInfo[Repr]:
cfg = ControlFlowGraph.from_bytecode(code)
current = cls.empty()
run_machine(Interpreter(code.first_lineno).abs_i_cfg(cfg), current)
glob_deps = tuple(current.globals)
instrs = current.instrs
instrs = cls.pass_push_pop_inline(instrs)
instrs = list(relabel(instrs))
if Options.get('log-stack-vm'):
print('DEBUG: stack-vm'.center(20, '='))
show_instrs(instrs)
phi_pass_name = Options['phi-pass']
e = None
try:
phi_pass = {
'phi-elim-by-move': phi_elim,
'keep-phi': phi_keep
}[Options['phi-pass']]
except KeyError as ke:
e = Exception("Unknown phi pass {!r}".format(phi_pass_name))
if e is not None:
raise e
instrs = list(phi_pass(instrs))
if Options.get('log-phi'):
print('DEBUG: phi'.center(20, '='))
show_instrs(instrs)
return PyCodeInfo(code.name, tuple(glob_deps), code.argnames,
code.freevars, code.cellvars, code.filename,
code.first_lineno, code.argcount,
code.kwonlyargcount,
bool(code.flags & CompilerFlags.GENERATOR),
bool(code.flags & CompilerFlags.VARKEYWORDS),
bool(code.flags & CompilerFlags.VARARGS), instrs)
def from_bytecode(bytecode: Bytecode) -> CFG:
"""Generates a new control-flow graph from a bytecode segment.
Besides generating a node for each block in the bytecode segment, as returned by
`bytecode`'s `ControlFlowGraph` implementation, we add two artificial nodes to
the generated CFG:
- an artificial entry node, having index -1, that is guaranteed to fulfill the
property of an entry node, i.e., there is no incoming edge, and
- an artificial exit node, having index `sys.maxsize`, that is guaranteed to
fulfill the property of an exit node, i.e., there is no outgoing edge, and
that is the only such node in the graph, which is important, e.g., for graph
reversal.
The index values are chosen that they do not appear in regular graphs, thus one
can easily distinguish them from the normal nodes in the graph by checking for
their index-property's value.
:param bytecode: The bytecode segment
:return: The control-flow graph for the segment
"""
blocks = ControlFlowGraph.from_bytecode(bytecode)
cfg = CFG(blocks)
# Create the nodes and a mapping of all edges to generate
edges, nodes = CFG._create_nodes(blocks)
# Insert all edges between the previously generated nodes
CFG._create_graph(cfg, edges, nodes)
# Filter all dead-code nodes
cfg = CFG._filter_dead_code_nodes(cfg)
# Insert dummy exit and entry nodes
cfg = CFG._insert_dummy_exit_node(cfg)
cfg = CFG._insert_dummy_entry_node(cfg)
return cfg
def test_legalize(self):
code = Bytecode()
code.first_lineno = 3
code.extend(
[
Instr("LOAD_CONST", 7),
Instr("STORE_NAME", "x"),
Instr("LOAD_CONST", 8, lineno=4),
Instr("STORE_NAME", "y"),
SetLineno(5),
Instr("LOAD_CONST", 9, lineno=6),
Instr("STORE_NAME", "z"),
]
)
blocks = ControlFlowGraph.from_bytecode(code)
blocks.legalize()
self.assertBlocksEqual(
blocks,
[
Instr("LOAD_CONST", 7, lineno=3),
Instr("STORE_NAME", "x", lineno=3),
Instr("LOAD_CONST", 8, lineno=4),
Instr("STORE_NAME", "y", lineno=4),
Instr("LOAD_CONST", 9, lineno=5),
Instr("STORE_NAME", "z", lineno=5),
],
)
def check_dont_optimize(self, code):
code = ControlFlowGraph.from_bytecode(code)
noopt = code.to_bytecode()
optim = self.optimize_blocks(code)
optim = optim.to_bytecode()
self.assertEqual(optim, noopt)
def test_setlineno(self):
# x = 7
# y = 8
# z = 9
code = Bytecode()
code.first_lineno = 3
code.extend([Instr("LOAD_CONST", 7),
Instr("STORE_NAME", 'x'),
SetLineno(4),
Instr("LOAD_CONST", 8),
Instr("STORE_NAME", 'y'),
SetLineno(5),
Instr("LOAD_CONST", 9),
Instr("STORE_NAME", 'z')])
blocks = ControlFlowGraph.from_bytecode(code)
self.assertBlocksEqual(blocks,
[Instr("LOAD_CONST", 7),
Instr("STORE_NAME", 'x'),
SetLineno(4),
Instr("LOAD_CONST", 8),
Instr("STORE_NAME", 'y'),
SetLineno(5),
Instr("LOAD_CONST", 9),
Instr("STORE_NAME", 'z')])
def test_from_bytecode_loop(self):
# for x in (1, 2, 3):
# if x == 2:
# break
# continue
label_loop_start = Label()
label_loop_exit = Label()
label_loop_end = Label()
code = Bytecode()
code.extend((Instr('SETUP_LOOP', label_loop_end, lineno=1),
Instr('LOAD_CONST', (1, 2, 3), lineno=1),
Instr('GET_ITER', lineno=1),
label_loop_start,
Instr('FOR_ITER', label_loop_exit, lineno=1),
Instr('STORE_NAME', 'x', lineno=1),
Instr('LOAD_NAME', 'x', lineno=2),
Instr('LOAD_CONST', 2, lineno=2),
Instr('COMPARE_OP', Compare.EQ, lineno=2),
Instr('POP_JUMP_IF_FALSE', label_loop_start, lineno=2),
Instr('BREAK_LOOP', lineno=3),
Instr('JUMP_ABSOLUTE', label_loop_start, lineno=4),
Instr('JUMP_ABSOLUTE', label_loop_start, lineno=4),
label_loop_exit,
Instr('POP_BLOCK', lineno=4),
label_loop_end,
Instr('LOAD_CONST', None, lineno=4),
Instr('RETURN_VALUE', lineno=4),
))
blocks = ControlFlowGraph.from_bytecode(code)
expected = [[Instr('SETUP_LOOP', blocks[8], lineno=1)],
[Instr('LOAD_CONST', (1, 2, 3), lineno=1),
Instr('GET_ITER', lineno=1)],
[Instr('FOR_ITER', blocks[7], lineno=1)],
[Instr('STORE_NAME', 'x', lineno=1),
Instr('LOAD_NAME', 'x', lineno=2),
Instr('LOAD_CONST', 2, lineno=2),
Instr('COMPARE_OP', Compare.EQ, lineno=2),
Instr('POP_JUMP_IF_FALSE', blocks[2], lineno=2)],
[Instr('BREAK_LOOP', lineno=3)],
[Instr('JUMP_ABSOLUTE', blocks[2], lineno=4)],
[Instr('JUMP_ABSOLUTE', blocks[2], lineno=4)],
[Instr('POP_BLOCK', lineno=4)],
[Instr('LOAD_CONST', None, lineno=4),
Instr('RETURN_VALUE', lineno=4)]]
self.assertBlocksEqual(blocks, *expected)
def test_from_bytecode(self):
bytecode = Bytecode()
label = Label()
bytecode.extend([Instr('LOAD_NAME', 'test', lineno=1),
Instr('POP_JUMP_IF_FALSE', label, lineno=1),
Instr('LOAD_CONST', 5, lineno=2),
Instr('STORE_NAME', 'x', lineno=2),
Instr('JUMP_FORWARD', label, lineno=2),
# dead code!
Instr('LOAD_CONST', 7, lineno=4),
Instr('STORE_NAME', 'x', lineno=4),
Label(), # unused label
label,
Label(), # unused label
Instr('LOAD_CONST', None, lineno=4),
Instr('RETURN_VALUE', lineno=4)])
blocks = ControlFlowGraph.from_bytecode(bytecode)
label2 = blocks[3]
self.assertBlocksEqual(blocks,
[Instr('LOAD_NAME', 'test', lineno=1),
Instr('POP_JUMP_IF_FALSE', label2, lineno=1)],
[Instr('LOAD_CONST', 5, lineno=2),
Instr('STORE_NAME', 'x', lineno=2),
Instr('JUMP_FORWARD', label2, lineno=2)],
[Instr('LOAD_CONST', 7, lineno=4),
Instr('STORE_NAME', 'x', lineno=4)],
[Instr('LOAD_CONST', None, lineno=4),
Instr('RETURN_VALUE', lineno=4)])
def optimize(self, code_obj):
bytecode = Bytecode.from_code(code_obj)
cfg = ControlFlowGraph.from_bytecode(bytecode)
self._optimize(cfg)
bytecode = cfg.to_bytecode()
code = bytecode.to_code()
return code
def optimize(self, code_obj):
bytecode = Bytecode.from_code(code_obj)
cfg = ControlFlowGraph.from_bytecode(bytecode)
self.optimize_cfg(cfg)
bytecode = cfg.to_bytecode()
code = bytecode.to_code()
return code
def test_from_bytecode_loop(self):
# for x in (1, 2, 3):
# if x == 2:
# break
# continue
label_loop_start = Label()
label_loop_exit = Label()
label_loop_end = Label()
code = Bytecode()
code.extend((
Instr("SETUP_LOOP", label_loop_end, lineno=1),
Instr("LOAD_CONST", (1, 2, 3), lineno=1),
Instr("GET_ITER", lineno=1),
label_loop_start,
Instr("FOR_ITER", label_loop_exit, lineno=1),
Instr("STORE_NAME", "x", lineno=1),
Instr("LOAD_NAME", "x", lineno=2),
Instr("LOAD_CONST", 2, lineno=2),
Instr("COMPARE_OP", Compare.EQ, lineno=2),
Instr("POP_JUMP_IF_FALSE", label_loop_start, lineno=2),
Instr("BREAK_LOOP", lineno=3),
Instr("JUMP_ABSOLUTE", label_loop_start, lineno=4),
Instr("JUMP_ABSOLUTE", label_loop_start, lineno=4),
label_loop_exit,
Instr("POP_BLOCK", lineno=4),
label_loop_end,
Instr("LOAD_CONST", None, lineno=4),
Instr("RETURN_VALUE", lineno=4),
))
blocks = ControlFlowGraph.from_bytecode(code)
expected = [
[Instr("SETUP_LOOP", blocks[8], lineno=1)],
[
Instr("LOAD_CONST", (1, 2, 3), lineno=1),
Instr("GET_ITER", lineno=1)
],
[Instr("FOR_ITER", blocks[7], lineno=1)],
[
Instr("STORE_NAME", "x", lineno=1),
Instr("LOAD_NAME", "x", lineno=2),
Instr("LOAD_CONST", 2, lineno=2),
Instr("COMPARE_OP", Compare.EQ, lineno=2),
Instr("POP_JUMP_IF_FALSE", blocks[2], lineno=2),
],
[Instr("BREAK_LOOP", lineno=3)],
[Instr("JUMP_ABSOLUTE", blocks[2], lineno=4)],
[Instr("JUMP_ABSOLUTE", blocks[2], lineno=4)],
[Instr("POP_BLOCK", lineno=4)],
[
Instr("LOAD_CONST", None, lineno=4),
Instr("RETURN_VALUE", lineno=4)
],
]
self.assertBlocksEqual(blocks, *expected)
def _create_nodes(
blocks: ControlFlowGraph,
) -> Tuple[Dict[int, List[int]], Dict[int, pg.ProgramGraphNode]]:
nodes: Dict[int, pg.ProgramGraphNode] = {}
edges: Dict[int, List[int]] = {}
for node_index, block in enumerate(blocks):
node = pg.ProgramGraphNode(index=node_index, basic_block=block)
nodes[node_index] = node
if node_index not in edges:
edges[node_index] = []
next_block = block.next_block
if next_block:
next_index = blocks.get_block_index(next_block)
edges[node_index].append(next_index)
if target_block := block.get_jump():
next_index = blocks.get_block_index(target_block)
edges[node_index].append(next_index)
def copy_graph(cfg: CFG) -> CFG:
"""Provides a copy of the control-flow graph.
:param cfg: The original graph
:return: The copied graph
"""
copy = CFG(ControlFlowGraph())
# pylint: disable=attribute-defined-outside-init
copy._graph = cfg._graph.copy()
return copy
def test_add_del_block(self):
code = ControlFlowGraph()
code[0].append(Instr('LOAD_CONST', 0))
block = code.add_block()
self.assertEqual(len(code), 2)
self.assertIs(block, code[1])
code[1].append(Instr('LOAD_CONST', 2))
self.assertBlocksEqual(code,
[Instr('LOAD_CONST', 0)],
[Instr('LOAD_CONST', 2)])
del code[0]
self.assertBlocksEqual(code,
[Instr('LOAD_CONST', 2)])
del code[0]
self.assertEqual(len(code), 0)
def test_blocks_broken_jump(self):
block = BasicBlock()
code = ControlFlowGraph()
code[0].append(Instr('JUMP_ABSOLUTE', block))
expected = textwrap.dedent("""
block1:
JUMP_ABSOLUTE <error: unknown block>
""").lstrip("\n")
self.check_dump_bytecode(code, expected)
def test_from_bytecode_loop(self):
# for x in (1, 2, 3):
# if x == 2:
# break
# continue
label_loop_start = Label()
label_loop_exit = Label()
label_loop_end = Label()
code = Bytecode()
code.extend((
Instr('SETUP_LOOP', label_loop_end, lineno=1),
Instr('LOAD_CONST', (1, 2, 3), lineno=1),
Instr('GET_ITER', lineno=1),
label_loop_start,
Instr('FOR_ITER', label_loop_exit, lineno=1),
Instr('STORE_NAME', 'x', lineno=1),
Instr('LOAD_NAME', 'x', lineno=2),
Instr('LOAD_CONST', 2, lineno=2),
Instr('COMPARE_OP', Compare.EQ, lineno=2),
Instr('POP_JUMP_IF_FALSE', label_loop_start, lineno=2),
Instr('BREAK_LOOP', lineno=3),
Instr('JUMP_ABSOLUTE', label_loop_start, lineno=4),
Instr('JUMP_ABSOLUTE', label_loop_start, lineno=4),
label_loop_exit,
Instr('POP_BLOCK', lineno=4),
label_loop_end,
Instr('LOAD_CONST', None, lineno=4),
Instr('RETURN_VALUE', lineno=4),
))
blocks = ControlFlowGraph.from_bytecode(code)
expected = [[Instr('SETUP_LOOP', blocks[8], lineno=1)],
[
Instr('LOAD_CONST', (1, 2, 3), lineno=1),
Instr('GET_ITER', lineno=1)
], [Instr('FOR_ITER', blocks[7], lineno=1)],
[
Instr('STORE_NAME', 'x', lineno=1),
Instr('LOAD_NAME', 'x', lineno=2),
Instr('LOAD_CONST', 2, lineno=2),
Instr('COMPARE_OP', Compare.EQ, lineno=2),
Instr('POP_JUMP_IF_FALSE', blocks[2], lineno=2)
], [Instr('BREAK_LOOP', lineno=3)],
[Instr('JUMP_ABSOLUTE', blocks[2], lineno=4)],
[Instr('JUMP_ABSOLUTE', blocks[2], lineno=4)],
[Instr('POP_BLOCK', lineno=4)],
[
Instr('LOAD_CONST', None, lineno=4),
Instr('RETURN_VALUE', lineno=4)
]]
self.assertBlocksEqual(blocks, *expected)
def check(self, source, function=False):
ref_code = get_code(source, function=function)
code = ConcreteBytecode.from_code(ref_code).to_code()
self.assertEqual(code, ref_code)
code = Bytecode.from_code(ref_code).to_code()
self.assertEqual(code, ref_code)
bytecode = Bytecode.from_code(ref_code)
blocks = ControlFlowGraph.from_bytecode(bytecode)
code = blocks.to_bytecode().to_code()
self.assertEqual(code, ref_code)
def check(self, source, function=False):
ref_code = get_code(source, function=function)
code = ConcreteBytecode.from_code(ref_code).to_code()
self.assertEqual(code, ref_code)
code = Bytecode.from_code(ref_code).to_code()
self.assertEqual(code, ref_code)
bytecode = Bytecode.from_code(ref_code)
blocks = ControlFlowGraph.from_bytecode(bytecode)
code = blocks.to_bytecode().to_code()
self.assertEqual(code, ref_code)
def copy_graph(cfg: CFG) -> CFG:
"""Provides a copy of the control-flow graph.
Args:
cfg: The original graph
Returns:
The copied graph
"""
copy = CFG(ControlFlowGraph()
) # TODO(fk) Cloning the bytecode cfg is complicated.
# pylint: disable=attribute-defined-outside-init
copy._graph = cfg._graph.copy()
return copy
def code_info(cls, code: Bytecode) -> PyCodeInfo[Repr]:
cfg = ControlFlowGraph.from_bytecode(code)
current = cls.empty()
run_machine(Interpreter(code.first_lineno).abs_i_cfg(cfg), current)
glob_deps = tuple(current.globals)
instrs = current.instrs
instrs = current.pass_push_pop_inline(instrs)
return PyCodeInfo(code.name, tuple(glob_deps), code.argnames,
code.freevars, code.cellvars, code.filename,
code.first_lineno, code.argcount,
code.kwonlyargcount,
bool(code.flags & CompilerFlags.GENERATOR),
bool(code.flags & CompilerFlags.VARKEYWORDS),
bool(code.flags & CompilerFlags.VARARGS), instrs)
def __init__(self, path: str, module_name='', to_import=['*']):
self.path = path
self.to_import = to_import
self.module_name = module_name
self._local_methods = []
source = open(path, 'rb')
compiled_source = compile(source.read(), path, 'exec')
self.bc = Bytecode.from_code(compiled_source)
self.cfg = ControlFlowGraph.from_bytecode(self.bc)
source.close()
self.build()
def disassemble(source, *, filename="<string>", function=False,
remove_last_return_none=False):
code = _disassemble(source, filename=filename, function=function)
blocks = ControlFlowGraph.from_bytecode(code)
if remove_last_return_none:
# drop LOAD_CONST+RETURN_VALUE to only keep 2 instructions,
# to make unit tests shorter
block = blocks[-1]
test = (block[-2].name == "LOAD_CONST"
and block[-2].arg is None
and block[-1].name == "RETURN_VALUE")
if not test:
raise ValueError("unable to find implicit RETURN_VALUE <None>: %s"
% block[-2:])
del block[-2:]
return blocks
def disassemble(source, *, filename="<string>", function=False,
remove_last_return_none=False):
code = _disassemble(source, filename=filename, function=function)
blocks = ControlFlowGraph.from_bytecode(code)
if remove_last_return_none:
# drop LOAD_CONST+RETURN_VALUE to only keep 2 instructions,
# to make unit tests shorter
block = blocks[-1]
test = (block[-2].name == "LOAD_CONST"
and block[-2].arg is None
and block[-1].name == "RETURN_VALUE")
if not test:
raise ValueError("unable to find implicit RETURN_VALUE <None>: %s"
% block[-2:])
del block[-2:]
return blocks
def test_label_at_the_end(self):
label = Label()
code = Bytecode([Instr('LOAD_NAME', 'x'),
Instr('UNARY_NOT'),
Instr('POP_JUMP_IF_FALSE', label),
Instr('LOAD_CONST', 9),
Instr('STORE_NAME', 'y'),
label])
cfg = ControlFlowGraph.from_bytecode(code)
self.assertBlocksEqual(cfg,
[Instr('LOAD_NAME', 'x'),
Instr('UNARY_NOT'),
Instr('POP_JUMP_IF_FALSE', cfg[2])],
[Instr('LOAD_CONST', 9),
Instr('STORE_NAME', 'y')],
[])
def test_label_at_the_end(self):
label = Label()
code = Bytecode([Instr('LOAD_NAME', 'x'),
Instr('UNARY_NOT'),
Instr('POP_JUMP_IF_FALSE', label),
Instr('LOAD_CONST', 9),
Instr('STORE_NAME', 'y'),
label])
cfg = ControlFlowGraph.from_bytecode(code)
self.assertBlocksEqual(cfg,
[Instr('LOAD_NAME', 'x'),
Instr('UNARY_NOT'),
Instr('POP_JUMP_IF_FALSE', cfg[2])],
[Instr('LOAD_CONST', 9),
Instr('STORE_NAME', 'y')],
[])
def check(self, code, *expected):
if isinstance(code, Bytecode):
code = ControlFlowGraph.from_bytecode(code)
optimizer = peephole_opt.PeepholeOptimizer()
optimizer.optimize_cfg(code)
code = code.to_bytecode()
try:
self.assertEqual(code, expected)
except AssertionError:
print("Optimized code:")
dump_bytecode(code)
print("Expected code:")
for instr in expected:
print(instr)
raise
def check(self, code, *expected):
if isinstance(code, Bytecode):
code = ControlFlowGraph.from_bytecode(code)
optimizer = peephole_opt.PeepholeOptimizer()
optimizer._optimize(code)
code = code.to_bytecode()
try:
self.assertEqual(code, expected)
except AssertionError:
print("Optimized code:")
dump_bytecode(code)
print("Expected code:")
for instr in expected:
print(instr)
raise
def test_from_bytecode(self):
bytecode = Bytecode()
label = Label()
bytecode.extend([
Instr("LOAD_NAME", "test", lineno=1),
Instr("POP_JUMP_IF_FALSE", label, lineno=1),
Instr("LOAD_CONST", 5, lineno=2),
Instr("STORE_NAME", "x", lineno=2),
Instr("JUMP_FORWARD", label, lineno=2),
# dead code!
Instr("LOAD_CONST", 7, lineno=4),
Instr("STORE_NAME", "x", lineno=4),
Label(), # unused label
label,
Label(), # unused label
Instr("LOAD_CONST", None, lineno=4),
Instr("RETURN_VALUE", lineno=4),
])
blocks = ControlFlowGraph.from_bytecode(bytecode)
label2 = blocks[3]
self.assertBlocksEqual(
blocks,
[
Instr("LOAD_NAME", "test", lineno=1),
Instr("POP_JUMP_IF_FALSE", label2, lineno=1),
],
[
Instr("LOAD_CONST", 5, lineno=2),
Instr("STORE_NAME", "x", lineno=2),
Instr("JUMP_FORWARD", label2, lineno=2),
],
[
Instr("LOAD_CONST", 7, lineno=4),
Instr("STORE_NAME", "x", lineno=4)
],
[
Instr("LOAD_CONST", None, lineno=4),
Instr("RETURN_VALUE", lineno=4)
],
)
def test_label_at_the_end(self):
label = Label()
code = Bytecode([
Instr("LOAD_NAME", "x"),
Instr("UNARY_NOT"),
Instr("POP_JUMP_IF_FALSE", label),
Instr("LOAD_CONST", 9),
Instr("STORE_NAME", "y"),
label,
])
cfg = ControlFlowGraph.from_bytecode(code)
self.assertBlocksEqual(
cfg,
[
Instr("LOAD_NAME", "x"),
Instr("UNARY_NOT"),
Instr("POP_JUMP_IF_FALSE", cfg[2]),
],
[Instr("LOAD_CONST", 9),
Instr("STORE_NAME", "y")],
[],
)
def __init__(self, path: str, module_name='', to_import=['*']):
self.path = path
self.to_import = to_import
self.module_name = module_name
self._local_methods = []
self.abi = None
source = open(path, 'rb')
source_src = source.read()
compiled_source = compile(source_src, path, 'exec')
ast_tree = ast.parse(source_src)
if module_name == '':
self.abi = ABI()
self.abi.visit(ast_tree)
self.bc = Bytecode.from_code(compiled_source)
self.cfg = ControlFlowGraph.from_bytecode(self.bc)
source.close()
self.build()
def test_eq(self):
# compare codes with multiple blocks and labels,
# Code.__eq__() renumbers labels to get equal labels
source = "x = 1 if test else 2"
code1 = disassemble(source)
code2 = disassemble(source)
self.assertEqual(code1, code2)
# Type mismatch
self.assertFalse(code1 == 1)
# argnames mismatch
cfg = ControlFlowGraph()
cfg.argnames = 10
self.assertFalse(code1 == cfg)
# instr mismatch
cfg = ControlFlowGraph()
cfg.argnames = code1.argnames
self.assertFalse(code1 == cfg)
def test_flag_inference(self):
# Check no loss of non-infered flags
code = ControlFlowGraph()
code.flags |= (CompilerFlags.NEWLOCALS | CompilerFlags.VARARGS |
CompilerFlags.VARKEYWORDS | CompilerFlags.NESTED |
CompilerFlags.FUTURE_GENERATOR_STOP)
code.update_flags()
for f in (CompilerFlags.NEWLOCALS, CompilerFlags.VARARGS,
CompilerFlags.VARKEYWORDS, CompilerFlags.NESTED,
CompilerFlags.NOFREE, CompilerFlags.OPTIMIZED,
CompilerFlags.FUTURE_GENERATOR_STOP):
self.assertTrue(bool(code.flags & f))
# Infer optimized and nofree
code = Bytecode()
flags = infer_flags(code)
self.assertTrue(bool(flags & CompilerFlags.OPTIMIZED))
self.assertTrue(bool(flags & CompilerFlags.NOFREE))
code.append(ConcreteInstr('STORE_NAME', 1))
flags = infer_flags(code)
self.assertFalse(bool(flags & CompilerFlags.OPTIMIZED))
self.assertTrue(bool(flags & CompilerFlags.NOFREE))
code.append(ConcreteInstr('STORE_DEREF', 2))
code.update_flags()
self.assertFalse(bool(code.flags & CompilerFlags.OPTIMIZED))
self.assertFalse(bool(code.flags & CompilerFlags.NOFREE))
# Infer generator
code = ConcreteBytecode()
code.append(ConcreteInstr('YIELD_VALUE'))
for is_async, expected in ((False, CompilerFlags.GENERATOR),
(True, CompilerFlags.ASYNC_GENERATOR)):
self.assertTrue(bool(infer_flags(code, is_async) & expected))
# Infer coroutine
code = ConcreteBytecode()
code.append(ConcreteInstr('GET_AWAITABLE'))
iter_flags = CompilerFlags(CompilerFlags.ITERABLE_COROUTINE)
for f, expected in ((CompilerFlags(0), True), (iter_flags, False)):
code.flags = f
self.assertEqual(bool(infer_flags(code) & CompilerFlags.COROUTINE),
expected)
# Test check flag sanity
code.append(ConcreteInstr('YIELD_VALUE'))
code.flags = CompilerFlags(CompilerFlags.GENERATOR |
CompilerFlags.COROUTINE)
infer_flags(code, is_async=True) # Just want to be sure it pases
with self.assertRaises(ValueError):
code.update_flags()
with self.assertRaises(ValueError):
infer_flags(None)
def test_bytecode_blocks(self):
source = """
def func(test):
if test == 1:
return 1
elif test == 2:
return 2
return 3
"""
code = disassemble(source, function=True)
code = ControlFlowGraph.from_bytecode(code)
# without line numbers
expected = textwrap.dedent("""
block1:
LOAD_FAST 'test'
LOAD_CONST 1
COMPARE_OP <Compare.EQ: 2>
POP_JUMP_IF_FALSE <block3>
-> block2
block2:
LOAD_CONST 1
RETURN_VALUE
block3:
LOAD_FAST 'test'
LOAD_CONST 2
COMPARE_OP <Compare.EQ: 2>
POP_JUMP_IF_FALSE <block5>
-> block4
block4:
LOAD_CONST 2
RETURN_VALUE
block5:
LOAD_CONST 3
RETURN_VALUE
""").lstrip()
self.check_dump_bytecode(code, expected)
# with line numbers
expected = textwrap.dedent("""
block1:
L. 2 0: LOAD_FAST 'test'
1: LOAD_CONST 1
2: COMPARE_OP <Compare.EQ: 2>
3: POP_JUMP_IF_FALSE <block3>
-> block2
block2:
L. 3 0: LOAD_CONST 1
1: RETURN_VALUE
block3:
L. 4 0: LOAD_FAST 'test'
1: LOAD_CONST 2
2: COMPARE_OP <Compare.EQ: 2>
3: POP_JUMP_IF_FALSE <block5>
-> block4
block4:
L. 5 0: LOAD_CONST 2
1: RETURN_VALUE
block5:
L. 6 0: LOAD_CONST 3
1: RETURN_VALUE
""").lstrip()
self.check_dump_bytecode(code, expected, lineno=True)
def optimize_blocks(self, code):
if isinstance(code, Bytecode):
code = ControlFlowGraph.from_bytecode(code)
optimizer = peephole_opt.PeepholeOptimizer()
optimizer._optimize(code)
return code
def test_bytecode_blocks(self):
source = """
def func(test):
if test == 1:
return 1
elif test == 2:
return 2
return 3
"""
code = disassemble(source, function=True)
code = ControlFlowGraph.from_bytecode(code)
# without line numbers
expected = textwrap.dedent("""
block1:
LOAD_FAST 'test'
LOAD_CONST 1
COMPARE_OP <Compare.EQ: 2>
POP_JUMP_IF_FALSE <block3>
-> block2
block2:
LOAD_CONST 1
RETURN_VALUE
block3:
LOAD_FAST 'test'
LOAD_CONST 2
COMPARE_OP <Compare.EQ: 2>
POP_JUMP_IF_FALSE <block5>
-> block4
block4:
LOAD_CONST 2
RETURN_VALUE
block5:
LOAD_CONST 3
RETURN_VALUE
""").lstrip()
self.check_dump_bytecode(code, expected)
# with line numbers
expected = textwrap.dedent("""
block1:
L. 2 0: LOAD_FAST 'test'
1: LOAD_CONST 1
2: COMPARE_OP <Compare.EQ: 2>
3: POP_JUMP_IF_FALSE <block3>
-> block2
block2:
L. 3 0: LOAD_CONST 1
1: RETURN_VALUE
block3:
L. 4 0: LOAD_FAST 'test'
1: LOAD_CONST 2
2: COMPARE_OP <Compare.EQ: 2>
3: POP_JUMP_IF_FALSE <block5>
-> block4
block4:
L. 5 0: LOAD_CONST 2
1: RETURN_VALUE
block5:
L. 6 0: LOAD_CONST 3
1: RETURN_VALUE
""").lstrip()
self.check_dump_bytecode(code, expected, lineno=True)
def test_to_code(self):
# test resolution of jump labels
bytecode = ControlFlowGraph()
bytecode.first_lineno = 3
bytecode.argcount = 3
bytecode.kwonlyargcount = 2
bytecode._stacksize = 1
bytecode.name = 'func'
bytecode.filename = 'hello.py'
bytecode.flags = 0x43
bytecode.argnames = ('arg', 'arg2', 'arg3', 'kwonly', 'kwonly2')
bytecode.docstring = None
block0 = bytecode[0]
block1 = bytecode.add_block()
block2 = bytecode.add_block()
block0.extend([Instr('LOAD_FAST', 'x', lineno=4),
Instr('POP_JUMP_IF_FALSE', block2, lineno=4)])
block1.extend([Instr('LOAD_FAST', 'arg', lineno=5),
Instr('STORE_FAST', 'x', lineno=5)])
block2.extend([Instr('LOAD_CONST', 3, lineno=6),
Instr('STORE_FAST', 'x', lineno=6),
Instr('LOAD_FAST', 'x', lineno=7),
Instr('RETURN_VALUE', lineno=7)])
expected = (b'|\x05\x00'
b'r\x0c\x00'
b'|\x00\x00'
b'}\x05\x00'
b'd\x01\x00'
b'}\x05\x00'
b'|\x05\x00'
b'S')
code = bytecode.to_bytecode().to_code()
self.assertEqual(code.co_consts, (None, 3))
self.assertEqual(code.co_argcount, 3)
self.assertEqual(code.co_kwonlyargcount, 2)
self.assertEqual(code.co_nlocals, 6)
self.assertEqual(code.co_stacksize, 1)
# FIXME: don't use hardcoded constants
self.assertEqual(code.co_flags, 0x43)
self.assertEqual(code.co_code, expected)
self.assertEqual(code.co_names, ())
self.assertEqual(code.co_varnames, ('arg', 'arg2', 'arg3', 'kwonly', 'kwonly2', 'x'))
self.assertEqual(code.co_filename, 'hello.py')
self.assertEqual(code.co_name, 'func')
self.assertEqual(code.co_firstlineno, 3)
