def set_device_id(self, newid):
if self.__id_form__ == 0:
self.conn.set_table_data(DEVICE_IDENT_TBL,
(newid + (' ' * (20 - len(newid)))))
else:
self.conn.set_table_data(DEVICE_IDENT_TBL,
(newid + (' ' * (10 - len(newid)))))
self.conn.send(
C1218WriteRequest(PROC_INITIATE_TBL,
'\x46\x08\x1c\x03\x0b\x0c\x09\x0f\x12'))
data = self.conn.recv()
if data != '\x00':
pass
try:
ident_table = self.conn.get_table_data(DEVICE_IDENT_TBL)
except C1218ReadTableError:
return 1
if self.__id_form__ == 0 and len(ident_table) != 20:
raise C1219ParseError(
'expected to read more data from DEVICE_IDENT_TBL',
DEVICE_IDENT_TBL)
elif self.__id_form__ != 0 and len(ident_table) != 10:
raise C1219ParseError(
'expected to read more data from DEVICE_IDENT_TBL',
DEVICE_IDENT_TBL)
if not ident_table.startswith(newid):
return 2
self.__device_id__ = newid
return 0
def updateLastCallStatuses(self):
tmp = 0
call_status_table = self.conn.get_table_data(CALL_STATUS_TBL)
if (len(call_status_table) % self.nbr_originate_numbers) != 0:
raise C1219ParseError('expected to read more data from CALL_STATUS_TBL', CALL_STATUS_TBL)
call_status_rcd_length = (len(call_status_table) / self.nbr_originate_numbers)
while tmp < self.nbr_originate_numbers:
self.__originating_numbers__[tmp]['status'] = ord(call_status_table[0])
call_status_table = call_status_table[call_status_rcd_length:]
tmp += 1
def __init__(self, conn):
"""
Initializes a new instance of the class and reads tables from the
corresponding decades to populate information.
@type conn: c1218.connection.Connection
@param conn: The driver to be used for interacting with the
necessary tables.
"""
self.conn = conn
general_config_table = self.conn.get_table_data(GEN_CONFIG_TBL)
actual_log_table = self.conn.get_table_data(ACT_LOG_TBL)
history_log_data_table = self.conn.get_table_data(HISTORY_LOG_DATA_TBL)
if len(general_config_table) < 19:
raise C1219ParseError(
'expected to read more data from GEN_CONFIG_TBL',
GEN_CONFIG_TBL)
if len(actual_log_table) < 9:
raise C1219ParseError(
'expected to read more data from ACT_LOG_TBL', ACT_LOG_TBL)
if len(history_log_data_table) < 11:
raise C1219ParseError(
'expected to read more data from HISTORY_LOG_DATA_TBL',
HISTORY_LOG_DATA_TBL)
### Parse GEN_CONFIG_TBL ###
tm_format = ord(general_config_table[1]) & 7
std_version_no = ord(general_config_table[11])
std_revision_no = ord(general_config_table[12])
### Parse ACT_LOG_TBL ###
log_flags = ord(actual_log_table[0])
event_number_flag = bool(log_flags & 1)
hist_date_time_flag = bool(log_flags & 2)
hist_seq_nbr_flag = bool(log_flags & 4)
hist_inhibit_ovf_flag = bool(log_flags & 8)
event_inhibit_ovf_flag = bool(log_flags & 16)
nbr_std_events = ord(actual_log_table[1])
nbr_mfg_events = ord(actual_log_table[2])
hist_data_length = ord(actual_log_table[3])
event_data_length = ord(actual_log_table[4])
self.__nbr_history_entries__, self.__nbr_event_entries__ = struct.unpack(
self.conn.c1219_endian + 'HH', actual_log_table[5:9])
if std_version_no > 1:
ext_log_flags = ord(actual_log_table[9])
nbr_program_tables = struct.unpack(self.conn.c1219_endian + 'H',
actual_log_table[10:12])
else:
ext_log_flags = None
nbr_program_tables = None
### Parse HISTORY_LOG_DATA_TBL ###
order_flag = ord(history_log_data_table[0]) & 1
overflow_flag = ord(history_log_data_table[0]) & 2
list_type_flag = ord(history_log_data_table[0]) & 4
inhibit_overflow_flag = ord(history_log_data_table[0]) & 8
nbr_valid_entries, last_entry_element, last_entry_seq_num, nbr_unread_entries = struct.unpack(
self.conn.c1219_endian + 'HHIH', history_log_data_table[1:11])
log_data = history_log_data_table[11:]
size_of_log_rcd = hist_data_length + 4 # hist_data_length + (SIZEOF(USER_ID) + SIZEOF(TABLE_IDB_BFLD))
if hist_date_time_flag:
size_of_log_rcd += LTIME_LENGTH[tm_format]
if event_number_flag:
size_of_log_rcd += 2
if hist_seq_nbr_flag:
size_of_log_rcd += 2
if len(log_data) != (size_of_log_rcd * self.nbr_history_entries):
raise C1219ParseError(
'log data size does not align with expected record size, possibly corrupt',
HISTORY_LOG_DATA_TBL)
entry_idx = 0
self.__logs__ = []
while entry_idx < self.nbr_history_entries:
self.__logs__.append(
get_history_entry_record(self.conn.c1219_endian,
hist_date_time_flag, tm_format,
event_number_flag, hist_seq_nbr_flag,
log_data[:size_of_log_rcd]))
log_data = log_data[size_of_log_rcd:]
entry_idx += 1
def __init__(self, conn):
"""
Initializes a new instance of the class and reads tables from the
corresponding decades to populate information.
@type conn: c1218.connection.Connection
@param conn: The driver to be used for interacting with the
necessary tables.
"""
self.conn = conn
actual_telephone_table = self.conn.getTableData(ACT_TELEPHONE_TBL)
global_parameters_table = self.conn.getTableData(GLOBAL_PARAMETERS_TBL)
originate_parameters_table = self.conn.getTableData(
ORIGINATE_PARAMETERS_TBL)
originate_schedule_table = self.conn.getTableData(
ORIGINATE_SCHEDULE_TBL)
answer_parameters_table = self.conn.getTableData(ANSWER_PARAMETERS_TBL)
if (actual_telephone_table) < 14:
raise C1219ParseError(
'expected to read more data from ACT_TELEPHONE_TBL',
ACT_TELEPHONE_TBL)
info = {}
### Parse ACT_TELEPHONE_TBL ###
use_extended_status = bool(ord(actual_telephone_table[0]) & 128)
prefix_length = ord(actual_telephone_table[4])
nbr_originate_numbers = ord(actual_telephone_table[5])
phone_number_length = ord(actual_telephone_table[6])
bit_rate_settings = (
ord(actual_telephone_table[1]) >>
3) & 3 # not the actual settings but rather where they are defined
self.__can_answer__ = bool(ord(actual_telephone_table[0]) & 1)
self.__use_extended_status__ = use_extended_status
self.__nbr_originate_numbers__ = nbr_originate_numbers
### Parse GLOBAL_PARAMETERS_TBL ###
self.__psem_identity__ = ord(global_parameters_table[0])
if bit_rate_settings == 1:
if len(global_parameters_table) < 5:
raise C1219ParseError(
'expected to read more data from GLOBAL_PARAMETERS_TBL',
GLOBAL_PARAMETERS_TBL)
self.__global_bit_rate__ = unpack(conn.c1219_endian + 'I',
global_parameters_table[1:5])[0]
### Parse ORIGINATE_PARAMETERS_TBL ###
if bit_rate_settings == 2:
self.__originate_bit_rate__ = unpack(
conn.c1219_endian + 'I', originate_parameters_table[0:4])[0]
originate_parameters_table = originate_parameters_table[4:]
self.__dial_delay__ = ord(originate_parameters_table[0])
originate_parameters_table = originate_parameters_table[1:]
if prefix_length != 0:
self.__prefix_number__ = originate_parameters_table[:prefix_length]
originate_parameters_table = originate_parameters_table[
prefix_length:]
self.__originating_numbers__ = {}
tmp = 0
while tmp < self.__nbr_originate_numbers__:
self.__originating_numbers__[tmp] = {
'idx': tmp,
'number': originate_parameters_table[:phone_number_length],
'status': None
}
originate_parameters_table = originate_parameters_table[
phone_number_length:]
tmp += 1
### Parse ORIGINATE_SHCEDULE_TBL ###
primary_phone_number_idx = ord(originate_schedule_table[0]) & 7
secondary_phone_number_idx = (
ord(originate_schedule_table[0]) >> 4) & 7
if primary_phone_number_idx < 7:
self.__primary_phone_number_idx__ = primary_phone_number_idx
if secondary_phone_number_idx < 7:
self.__secondary_phone_number_idx__ = secondary_phone_number_idx
### Prase ANSWER_PARAMETERS_TBL ###
if bit_rate_settings == 2:
self.__answer_bit_rate__ = unpack(conn.c1219_endian + 'I',
answer_parameters_table[0:4])[0]
self.updateLastCallStatuses()
def __init__(self, conn):
"""
Initializes a new instance of the class and reads tables from the
corresponding decades to populate information.
@type conn: c1218.connection.Connection
@param conn: The driver to be used for interacting with the
necessary tables.
"""
self.conn = conn
act_security_table = conn.get_table_data(ACT_SECURITY_LIMITING_TBL)
security_table = conn.get_table_data(SECURITY_TBL)
access_ctl_table = conn.get_table_data(ACCESS_CONTROL_TBL)
try:
key_table = conn.get_table_data(KEY_TBL)
except C1218ReadTableError:
key_table = None
if len(act_security_table) < 6:
raise C1219ParseError(
'expected to read more data from ACT_SECURITY_LIMITING_TBL',
ACT_SECURITY_LIMITING_TBL)
### Parse ACT_SECURITY_LIMITING_TBL ###
self._nbr_passwords = act_security_table[0]
self._password_len = act_security_table[1]
self._nbr_keys = act_security_table[2]
self._key_len = act_security_table[3]
self._nbr_perm_used = struct.unpack(self.conn.c1219_endian + 'H',
act_security_table[4:6])[0]
### Parse SECURITY_TBL ###
if len(security_table) != (
(self.nbr_passwords * self.password_len) + self.nbr_passwords):
raise C1219ParseError(
'expected to read more data from SECURITY_TBL', SECURITY_TBL)
self._passwords = {}
tmp = 0
while tmp < self.nbr_passwords:
self._passwords[tmp] = {
'idx': tmp,
'password': security_table[:self.password_len],
'groups': security_table[self.password_len]
}
security_table = security_table[self.password_len + 1:]
tmp += 1
### Parse ACCESS_CONTROL_TBL ###
if len(access_ctl_table) != (self.nbr_perm_used * 4):
raise C1219ParseError(
'expected to read more data from ACCESS_CONTROL_TBL',
ACCESS_CONTROL_TBL)
self._table_permissions = {}
self._procedure_permissions = {}
tmp = 0
while tmp < self.nbr_perm_used:
(proc_nbr, std_vs_mfg, proc_flag, flag1, flag2,
flag3) = get_table_idcb_field(self.conn.c1219_endian,
access_ctl_table)
if proc_flag:
self._procedure_permissions[proc_nbr] = {
'idx': proc_nbr,
'mfg': std_vs_mfg,
'anyread': flag1,
'anywrite': flag2,
'read': access_ctl_table[2],
'write': access_ctl_table[3]
}
else:
self._table_permissions[proc_nbr] = {
'idx': proc_nbr,
'mfg': std_vs_mfg,
'anyread': flag1,
'anywrite': flag2,
'read': access_ctl_table[2],
'write': access_ctl_table[3]
}
access_ctl_table = access_ctl_table[4:]
tmp += 1
### Parse KEY_TBL ###
self._keys = {}
if key_table is not None:
if len(key_table) != (self.nbr_keys * self.key_len):
raise C1219ParseError(
'expected to read more data from KEY_TBL', KEY_TBL)
tmp = 0
while tmp < self.nbr_keys:
self._keys[tmp] = key_table[:self.key_len]
key_table = key_table[self.key_len:]
tmp += 1
def __init__(self, conn):
"""
Initializes a new instance of the class and reads tables from the
corresponding decades to populate information.
@type conn: c1218.connection.Connection
@param conn: The driver to be used for interacting with the
necessary tables.
"""
self.conn = conn
general_config_table = conn.get_table_data(GEN_CONFIG_TBL)
general_mfg_table = conn.get_table_data(GENERAL_MFG_ID_TBL)
try:
mode_status_table = conn.get_table_data(ED_MODE_STATUS_TBL)
except C1218ReadTableError:
mode_status_table = None
try:
ident_table = conn.get_table_data(DEVICE_IDENT_TBL)
except C1218ReadTableError:
ident_table = None
if len(general_config_table) < 19:
raise C1219ParseError(
'expected to read more data from GEN_CONFIG_TBL',
GEN_CONFIG_TBL)
if len(general_mfg_table) < 17:
raise C1219ParseError(
'expected to read more data from GENERAL_MFG_ID_TBL',
GENERAL_MFG_ID_TBL)
if mode_status_table and len(mode_status_table) < 5:
raise C1219ParseError(
'expected to read more data from ED_MODE_STATUS_TBL',
ED_MODE_STATUS_TBL)
### Parse GEN_CONFIG_TBL ###
self.__char_format__ = {
1: 'ISO/IEC 646 (7-bit)',
2: 'ISO 8859/1 (Latin 1)',
3: 'UTF-8',
4: 'UTF-16',
5: 'UTF-32'
}.get((ord(general_config_table[0]) & 14) >> 1) or 'Unknown'
self.__nameplate_type__ = {
0: 'Gas',
1: 'Water',
2: 'Electric'
}.get(ord(general_config_table[7])) or 'Unknown'
self.__id_form__ = ord(general_config_table[1]) & 32
self.__std_version_no__ = ord(general_config_table[11])
self.__std_revision_no__ = ord(general_config_table[12])
self.__dim_std_tbls_used__ = ord(general_config_table[13])
self.__dim_mfg_tbls_used__ = ord(general_config_table[14])
self.__dim_std_proc_used__ = ord(general_config_table[15])
self.__dim_mfg_proc_used__ = ord(general_config_table[16])
self.__std_tbls_used__ = []
tmp_data = general_config_table[19:]
for p in xrange(self.__dim_std_tbls_used__):
for i in xrange(7):
if ord(tmp_data[p]) & (2**i):
self.__std_tbls_used__.append(i + (p * 8))
self.__mfg_tbls_used__ = []
tmp_data = tmp_data[self.__dim_std_tbls_used__:]
for p in xrange(self.__dim_mfg_tbls_used__):
for i in xrange(7):
if ord(tmp_data[p]) & (2**i):
self.__mfg_tbls_used__.append(i + (p * 8))
self.__std_proc_used__ = []
tmp_data = tmp_data[self.__dim_mfg_tbls_used__:]
for p in xrange(self.__dim_std_proc_used__):
for i in xrange(7):
if ord(tmp_data[p]) & (2**i):
self.__std_proc_used__.append(i + (p * 8))
self.__mfg_proc_used__ = []
tmp_data = tmp_data[self.__dim_std_proc_used__:]
for p in xrange(self.__dim_mfg_proc_used__):
for i in xrange(7):
if ord(tmp_data[p]) & (2**i):
self.__mfg_proc_used__.append(i + (p * 8))
### Parse GENERAL_MFG_ID_TBL ###
self.__manufacturer__ = general_mfg_table[0:4].rstrip()
self.__ed_model__ = general_mfg_table[4:12].rstrip()
self.__hw_version_no__ = ord(general_mfg_table[12])
self.__hw_revision_no__ = ord(general_mfg_table[13])
self.__fw_version_no__ = ord(general_mfg_table[14])
self.__fw_revision_no__ = ord(general_mfg_table[15])
if self.__id_form__ == 0:
self.__mfg_serial_no__ = general_mfg_table[16:32].strip()
else:
self.__mfg_serial_no__ = general_mfg_table[16:24]
### Parse ED_MODE_STATUS_TBL ###
if mode_status_table:
self.__ed_mode__ = ord(mode_status_table[0])
self.__std_status__ = struct.unpack(conn.c1219_endian + 'H',
mode_status_table[1:3])[0]
### Parse DEVICE_IDENT_TBL ###
if ident_table:
if self.__id_form__ == 0 and len(ident_table) != 20:
raise C1219ParseError(
'expected to read more data from DEVICE_IDENT_TBL',
DEVICE_IDENT_TBL)
elif self.__id_form__ != 0 and len(ident_table) != 10:
raise C1219ParseError(
'expected to read more data from DEVICE_IDENT_TBL',
DEVICE_IDENT_TBL)
self.__device_id__ = ident_table.strip()
