def getMatrix(x: int, y: int, surf: cairo.ImageSurface):
sx = surf.get_width() / 8.5 / 25.4
sy = surf.get_height() / 11 / 25.4
x0 = (origin[0] + deltaX * x) * sx
y0 = (origin[1] + deltaY * y) * sy
return cairo.Matrix(x0=x0, y0=y0, xx=sx, yy=sy)
def _cairo_surface_write_to_bmp(img: cairo.ImageSurface) -> bytes:
data = bytes(img.get_data())
return (
b"BM"
+ struct.pack(
"<ihhiiiihhiiiiii",
54 + len(data), # size of BMP file
0, # unused
0, # unused
54, # pixel array offset
40, # DIB header
img.get_width(), # width
img.get_height(), # height
1, # planes
32, # BPP
0, # no compression
len(data), # size of the raw bitmap data
2835, # 72DPI H
2835, # 72DPI V
0, # palette
0, # all colors are important
)
+ data
)
def convert_svg2png(infile, outfile, w, h):
"""
Converts svg files to png using Cairosvg or Inkscape
@file_path : String; the svg file absolute path
@dest_path : String; the png file absolute path
"""
if use_inkscape:
p = Popen(["inkscape", "-z", "-f", infile, "-e", outfile,
"-w", str(w), "-h", str(h)],
stdout=PIPE, stderr=PIPE)
output, err = p.communicate()
else:
handle = Rsvg.Handle()
svg = handle.new_from_file(infile)
dim = svg.get_dimensions()
img = ImageSurface(FORMAT_ARGB32, w, h)
ctx = Context(img)
ctx.scale(w / dim.width, h / dim.height)
svg.render_cairo(ctx)
png_io = BytesIO()
img.write_to_png(png_io)
with open(outfile, 'wb') as fout:
fout.write(png_io.getvalue())
svg.close()
png_io.close()
img.finish()
def make_image_surface(bitmap, copy=True):
if (type(bitmap) == FT_Bitmap):
# bare FT_Bitmap
content = bitmap
else:
# wrapped Bitmap instance
content = bitmap._FT_Bitmap
"creates a Cairo ImageSurface containing (a copy of) the Bitmap pixels."
if content.pixel_mode == FT_PIXEL_MODE_MONO:
cairo_format = FORMAT_A1
elif content.pixel_mode == FT_PIXEL_MODE_GRAY:
cairo_format = FORMAT_A8
else:
raise NotImplementedError("unsupported bitmap format %d" %
content.pixel_mode)
src_pitch = content.pitch
dst_pitch = ImageSurface.format_stride_for_width(cairo_format,
content.width)
if not copy and dst_pitch == src_pitch and content.buffer != None:
pixels = content.buffer
else:
pixels = to_array(content, content.pixel_mode, dst_pitch)
result = ImageSurface.create_for_data(pixels, cairo_format, content.width,
content.rows, dst_pitch)
return result
def create_surface(self):
bw, bh = self.size
old_backing = self._backing
#should we honour self.depth here?
self._backing = None
if bw==0 or bh==0:
#this can happen during cleanup
return None
backing = ImageSurface(FORMAT_ARGB32, bw, bh)
self._backing = backing
cr = Context(backing)
if self._alpha_enabled:
cr.set_operator(OPERATOR_CLEAR)
cr.set_source_rgba(1, 1, 1, 0)
else:
cr.set_operator(OPERATOR_SOURCE)
cr.set_source_rgba(1, 1, 1, 1)
cr.rectangle(0, 0, bw, bh)
cr.fill()
if COPY_OLD_BACKING and old_backing is not None:
oldw, oldh = old_backing.get_width(), old_backing.get_height()
sx, sy, dx, dy, w, h = self.gravity_copy_coords(oldw, oldh, bw, bh)
cr.translate(dx-sx, dy-sy)
cr.rectangle(sx, sy, w, h)
cr.clip()
cr.set_operator(OPERATOR_SOURCE)
cr.set_source_surface(old_backing, 0, 0)
cr.paint()
backing.flush()
return cr
def renegerate_overlay_buffer(self):
image = ImageSurface(cairo.FORMAT_ARGB32, self.video_width, self.video_height)
context = Context(image)
text = "Foo bar 123"
font = pango.FontDescription('sans normal 22')
text_offset = [6, 6]
textOverflowed = False
if text:
pcContext = pangocairo.CairoContext(context)
pangoLayout = pcContext.create_layout()
font = pango.FontDescription('sans normal 22')
pangoLayout.set_font_description(font)
context.move_to(text_offset[0]+2, text_offset[1]+2)
pangoLayout.set_markup('<span foreground="black" >%s</span>' % text)
pcContext.show_layout(pangoLayout)
context.move_to(text_offset[0], text_offset[1])
pangoLayout.set_markup('<span foreground="white" >%s</span>' % text)
pcContext.show_layout(pangoLayout)
textWidth, textHeight = pangoLayout.get_pixel_size()
self.overlay_buffer = image.get_data()
print "overlay_buffer size: %d" % len(self.overlay_buffer)
def convert_to_png(input_file, output_file, width=None, height=None):
"""Convert svg to png."""
if width and height:
handle = Rsvg.Handle()
svg = handle.new_from_file(input_file)
dim = svg.get_dimensions()
img = ImageSurface(FORMAT_ARGB32, width, height)
ctx = Context(img)
ctx.scale(width / dim.width, height / dim.height)
svg.render_cairo(ctx)
png_io = BytesIO()
img.write_to_png(png_io)
with open(output_file, 'wb') as fout:
fout.write(png_io.getvalue())
fout.close()
svg.close()
png_io.close()
img.finish()
else:
with open(input_file, "r") as content_file:
svg = content_file.read()
content_file.close()
fout = open(output_file, "wb")
svg2png(bytestring=bytes(svg, "UTF-8"), write_to=fout)
fout.close()
def writeAsPNG(root, filename): from cairo import ImageSurface, Context, FORMAT_ARGB32 from rsvg import Handle img = ImageSurface(FORMAT_ARGB32, float(root.attrib["width"]),float(root.attrib["height"])) #test ctx = Context(img) handle = Handle(None, tostring(root)) handle.render_cairo(ctx) img.write_to_png(filename) return filename
class Canvas:
def __init__(self, width, height):
self.xform = lambda x, y: (x, y)
self.img = ImageSurface(FORMAT_RGB24, width, height)
self.ctx = Context(self.img)
self.ctx.move_to(0, 0)
self.ctx.line_to(width, 0)
self.ctx.line_to(width, height)
self.ctx.line_to(0, height)
self.ctx.line_to(0, 0)
self.ctx.set_source_rgb(1, 1, 1)
self.ctx.fill()
self.width = width
self.height = height
def fit(self, left, top, right, bottom):
xoff = left
yoff = top
xscale = self.width / float(right - left)
yscale = self.height / float(bottom - top)
if abs(xscale) > abs(yscale):
xscale *= abs(yscale) / abs(xscale)
elif abs(xscale) < abs(yscale):
yscale *= abs(xscale) / abs(yscale)
self.xform = lambda x, y: ((x - xoff) * xscale, (y - yoff) * yscale)
def dot(self, x, y, size=4, fill=(.5, .5, .5)):
x, y = self.xform(x, y)
self.ctx.arc(x, y, size/2., 0, 2*pi)
self.ctx.set_source_rgb(*fill)
self.ctx.fill()
def line(self, points, stroke=(.5, .5, .5), width=1):
self.ctx.move_to(*self.xform(*points[0]))
for (x, y) in points[1:]:
self.ctx.line_to(*self.xform(x, y))
self.ctx.set_source_rgb(*stroke)
self.ctx.set_line_cap(LINE_CAP_ROUND)
self.ctx.set_line_width(width)
self.ctx.stroke()
def save(self, filename):
self.img.write_to_png(filename)
class Canvas:
def __init__(self, width, height):
self.xform = lambda x, y: (x, y)
self.img = ImageSurface(FORMAT_RGB24, width, height)
self.ctx = Context(self.img)
self.ctx.move_to(0, 0)
self.ctx.line_to(width, 0)
self.ctx.line_to(width, height)
self.ctx.line_to(0, height)
self.ctx.line_to(0, 0)
self.ctx.set_source_rgb(1, 1, 1)
self.ctx.fill()
self.width = width
self.height = height
def fit(self, left, top, right, bottom):
xoff = left
yoff = top
xscale = self.width / float(right - left)
yscale = self.height / float(bottom - top)
if abs(xscale) > abs(yscale):
xscale *= abs(yscale) / abs(xscale)
elif abs(xscale) < abs(yscale):
yscale *= abs(xscale) / abs(yscale)
self.xform = lambda x, y: ((x - xoff) * xscale, (y - yoff) * yscale)
def dot(self, x, y, size=4, fill=(.5, .5, .5)):
x, y = self.xform(x, y)
self.ctx.arc(x, y, size / 2., 0, 2 * pi)
self.ctx.set_source_rgb(*fill)
self.ctx.fill()
def line(self, points, stroke=(.5, .5, .5), width=1):
self.ctx.move_to(*self.xform(*points[0]))
for (x, y) in points[1:]:
self.ctx.line_to(*self.xform(x, y))
self.ctx.set_source_rgb(*stroke)
self.ctx.set_line_cap(LINE_CAP_ROUND)
self.ctx.set_line_width(width)
self.ctx.stroke()
def save(self, filename):
self.img.write_to_png(filename)
def _surface_to_array(surface: cairo.ImageSurface) -> np.ndarray:
"""convert surface to array"""
# NOTE! The format of the array is PREMULTIPLIED ALPHA, not RGBA!
res = np.ndarray(
(surface.get_height(), surface.get_width(),
4), # do height and width work here???
dtype=np.uint8,
buffer=surface.get_data())
res = res[:, :, [2, 1, 0, 3]] # swap RGB order like OpenCV
return res
def _tonumpy(surface: cairo.ImageSurface):
np_image = np.ndarray(
shape=(surface.get_height(), surface.get_width(), 4),
dtype=np.uint8,
buffer=surface.get_data(),
strides=(surface.get_width() * 4, 4, 1)
)
np_image = np_image[:, :, :-1]
np_image = np_image[:, :, ::-1]
np_image = np_image.copy()
return np_image
def __init__(self,
width: int,
height: Optional[int] = None,
*,
normalise: bool = True):
if height is None:
height = width
self._width = width
self._height = height
self._surface = ImageSurface(FORMAT_ARGB32, width, height)
self._context = Context(self._surface)
self._normalise = normalise
if self._normalise:
self.scale(self._width, self._height)
def draw_frame(self, target: cairo.ImageSurface):
ctx = cairo.Context(target)
ctx.set_source_rgba(0.92, 0.72, 1, 0.3)
w, h = target.get_width(), target.get_height()
projection = np.dot(numgl.perspective(90, w / h, 0.1, 5),
self.camera())
clip = pygl.transform(projection, self.positions)
screen = pygl.get_screen(clip, (w, h))
for x, y, _ in screen:
ctx.move_to(x, y)
ctx.arc(x, y, 1, 0, TAU)
ctx.fill()
def get_cached_image(self, width, height, zoom, parameters=None, clear=False):
"""Get ImageSurface object, if possible, cached
The method checks whether the image was already rendered. This is done by comparing the passed size and
parameters with those of the last image. If they are equal, the cached image is returned. Otherwise,
a new ImageSurface with the specified dimensions is created and returned.
:param width: The width of the image
:param height: The height of the image
:param zoom: The current scale/zoom factor
:param parameters: The parameters used for the image
:param clear: If True, the cache is emptied, thus the image won't be retrieved from cache
:returns: The flag is True when the image is retrieved from the cache, otherwise False; The cached image
surface or a blank one with the desired size; The zoom parameter when the image was stored
:rtype: bool, ImageSurface, float
"""
if not parameters:
parameters = {}
if self.__compare_parameters(width, height, zoom, parameters) and not clear:
return True, self.__image, self.__zoom
# Restrict image surface size to prevent excessive use of memory
self.__limiting_multiplicator = 1
area = width * zoom * self.__zoom_multiplicator * height * zoom * self.__zoom_multiplicator
if area > MAX_ALLOWED_AREA:
self.__limiting_multiplicator = sqrt(MAX_ALLOWED_AREA / area)
image = ImageSurface(self.__format, int(ceil(width * zoom * self.multiplicator)),
int(ceil(height * zoom * self.multiplicator)))
self.__set_cached_image(image, width, height, zoom, parameters)
return False, self.__image, zoom
def draw_pieces(self):
if not self.num_pieces:
# Nothing to draw.
return
if (self.resized() or self.pieces != self.prev_pieces
or self.pieces_overlay is None):
# Need to recreate the cache drawing
self.pieces_overlay = ImageSurface(FORMAT_ARGB32, self.width,
self.height)
ctx = Context(self.pieces_overlay)
if self.pieces:
pieces = self.pieces
elif self.num_pieces:
# Completed torrents do not send any pieces so create list using 'completed' state.
pieces = [COLOR_STATES.index('completed')] * self.num_pieces
start_pos = 0
piece_width = self.width / len(pieces)
pieces_colors = [[
color / 65535
for color in self.gtkui_config['pieces_color_%s' % state]
] for state in COLOR_STATES]
for state in pieces:
ctx.set_source_rgb(*pieces_colors[state])
ctx.rectangle(start_pos, 0, piece_width, self.height)
ctx.fill()
start_pos += piece_width
self.cr.set_source_surface(self.pieces_overlay)
self.cr.paint()
def write_text(self):
if not self.text:
# Nothing useful to draw, return now!
return
if self.resized(
) or self.text != self.prev_text or self.text_overlay is None:
# Need to recreate the cache drawing
self.text_overlay = ImageSurface(FORMAT_ARGB32, self.width,
self.height)
ctx = Context(self.text_overlay)
pg = CairoContext(ctx)
pl = pg.create_layout()
pl.set_font_description(self.text_font)
pl.set_width(-1) # No text wrapping
pl.set_text(self.text)
plsize = pl.get_size()
text_width = plsize[0] // SCALE
text_height = plsize[1] // SCALE
area_width_without_text = self.width - text_width
area_height_without_text = self.height - text_height
ctx.move_to(area_width_without_text // 2,
area_height_without_text // 2)
ctx.set_source_rgb(1, 1, 1)
pg.update_layout(pl)
pg.show_layout(pl)
self.cr.set_source_surface(self.text_overlay)
self.cr.paint()
def nasty_rgb_via_png_paint(self, cairo_format, has_alpha : bool, img_data,
x : int, y : int, width : int, height : int, rowstride : int, rgb_format):
log.warn("nasty_rgb_via_png_paint%s",
(cairo_format, has_alpha, len(img_data), x, y, width, height, rowstride, rgb_format))
#PIL fallback
from PIL import Image
if has_alpha:
oformat = "RGBA"
else:
oformat = "RGB"
#use frombytes rather than frombuffer to be compatible with python3 new-style buffers
#this is slower, but since this codepath is already dreadfully slow, we don't care
bdata = memoryview_to_bytes(img_data)
src_format = rgb_format.replace("X", "A")
try:
img = Image.frombytes(oformat, (width,height), bdata, "raw", src_format, rowstride, 1)
except ValueError as e:
log("PIL Image frombytes:", exc_info=True)
raise Exception("failed to parse raw %s data as %s to %s: %s" % (
rgb_format, src_format, oformat, e)) from None
#This is insane, the code below should work, but it doesn't:
# img_data = bytearray(img.tostring('raw', oformat, 0, 1))
# pixbuf = new_from_data(img_data, COLORSPACE_RGB, True, 8, width, height, rowstride)
# success = self.cairo_paint_pixbuf(pixbuf, x, y)
#So we still rountrip via PNG:
from io import BytesIO
png = BytesIO()
img.save(png, format="PNG")
reader = BytesIO(png.getvalue())
png.close()
img = ImageSurface.create_from_png(reader)
self.cairo_paint_surface(img, x, y, width, height, {})
return True
def motionblur(target: cairo.ImageSurface, t: float, draw: Callable, look_ahead: float, n: int):
w = target.get_width()
h = target.get_width()
frames = []
for tt in np.linspace(0, look_ahead, n):
frame = np.zeros((w * h * 4,), dtype=np.uint8)
surface = cairo.ImageSurface.create_for_data(memoryview(frame), cairo.Format.RGB24, w, h)
draw(surface, t + tt)
#frames.append(degamma(frame))
frames.append(frame)
avg = np.average(np.stack(frames), axis=0).astype(np.uint8)
#avg = gamma(np.average(np.stack(frames), axis=0)).astype(np.uint8)
data = target.get_data()
for i in range(len(data)):
data[i] = avg[i]
def __init__(self, w=10, h=10, path=''):
self._w, self._h = w, h
surface = ImageSurface.create_from_png(path)
self._imgpat = SurfacePattern(surface)
self._imgpat.set_filter(FILTER_BEST)
scaler = Matrix()
scaler.scale(surface.get_width() / w, surface.get_height() / h)
self._imgpat.set_matrix(scaler)
def __init__(self, width, height):
self.xform = lambda x, y: (x, y)
self.img = ImageSurface(FORMAT_RGB24, width, height)
self.ctx = Context(self.img)
self.ctx.move_to(0, 0)
self.ctx.line_to(width, 0)
self.ctx.line_to(width, height)
self.ctx.line_to(0, height)
self.ctx.line_to(0, 0)
self.ctx.set_source_rgb(1, 1, 1)
self.ctx.fill()
self.width = width
self.height = height
def create_cairo_font_face_for_file(filename, faceindex=0, loadoptions=0):
"""
http://cairographics.org/freetypepython
"""
CAIRO_STATUS_SUCCESS = 0
FT_Err_Ok = 0
# find shared objects
_freetype_so = ctypes.CDLL('libfreetype.so.6')
_cairo_so = ctypes.CDLL('libcairo.so.2')
_cairo_so.cairo_ft_font_face_create_for_ft_face.restype = ctypes.c_void_p
_cairo_so.cairo_ft_font_face_create_for_ft_face.argtypes = [
ctypes.c_void_p, ctypes.c_int
]
_cairo_so.cairo_set_font_face.argtypes = [ctypes.c_void_p, ctypes.c_void_p]
_cairo_so.cairo_font_face_status.argtypes = [ctypes.c_void_p]
_cairo_so.cairo_status.argtypes = [ctypes.c_void_p]
# initialize freetype
_ft_lib = ctypes.c_void_p()
if FT_Err_Ok != _freetype_so.FT_Init_FreeType(ctypes.byref(_ft_lib)):
raise "Error initialising FreeType library."
class PycairoContext(ctypes.Structure):
_fields_ = [("PyObject_HEAD", ctypes.c_byte * object.__basicsize__),
("ctx", ctypes.c_void_p), ("base", ctypes.c_void_p)]
_surface = ImageSurface(FORMAT_A8, 0, 0)
# create freetype face
ft_face = ctypes.c_void_p()
cairo_ctx = Context(_surface)
cairo_t = PycairoContext.from_address(id(cairo_ctx)).ctx
_cairo_so.cairo_ft_font_face_create_for_ft_face.restype = ctypes.c_void_p
if FT_Err_Ok != _freetype_so.FT_New_Face(_ft_lib, filename, faceindex,
ctypes.byref(ft_face)):
raise Exception("Error creating FreeType font face for " + filename)
# create cairo font face for freetype face
cr_face = _cairo_so.cairo_ft_font_face_create_for_ft_face(
ft_face, loadoptions)
if CAIRO_STATUS_SUCCESS != _cairo_so.cairo_font_face_status(cr_face):
raise Exception("Error creating cairo font face for " + filename)
_cairo_so.cairo_set_font_face(cairo_t, cr_face)
if CAIRO_STATUS_SUCCESS != _cairo_so.cairo_status(cairo_t):
raise Exception("Error creating cairo font face for " + filename)
face = cairo_ctx.get_font_face()
return face
def __missing__(self, zoom):
zoomfac = (1 + 2 * self._r) * zoom
self[zoom] = SVGC = ImageSurface(FORMAT_ARGB32,
ceil(zoomfac * self._h),
ceil(zoomfac * self._k))
sccr = Context(SVGC)
sccr.scale(zoom, zoom)
sccr.translate(self._uh, self._uk)
self._paint_function(sccr)
return SVGC
def draw_triangle(target: cairo.ImageSurface, triangle, attributes,
texture: Texture):
# drop z coordinate
p0, p1, p2 = [p[:2] for p in triangle]
# compute area
area = edge(p0, p1, p2)
if area == 0:
return
width, height = resolution(target)
xmin = int(max(min(p0[0], p1[0], p2[0]), 0))
xmax = int(min(max(p0[0], p1[0], p2[0]), width))
ymin = int(max(min(p0[1], p1[1], p2[1]), 0))
ymax = int(min(max(p0[1], p1[1], p2[1]), height))
x, y = np.meshgrid(range(xmin, xmax), range(ymin, ymax), indexing='xy')
p = np.vstack([x.ravel(), y.ravel()]).T
# Barycentric coordinates are calculated as the areas of the three sub-triangles divided
# by the area of the whole triangle.
barycentric = np.vstack(
[edge(p1, p2, p), edge(p2, p0, p),
edge(p0, p1, p)]).T / area
# Find all indices of rows where all columns are positive
is_inside = np.all(barycentric >= 0, axis=-1)
# Compute indices of all points inside triangle
stride = np.array([4, target.get_stride()])
indices = np.dot(p[is_inside], stride)
# Interpolate vertex attributes
attrs = np.dot(barycentric[is_inside], attributes)
# Fill pixels
data = target.get_data()
for index, (u, v) in zip(indices, attrs):
r, g, b = texture(u, v)
data[index + 0] = r
data[index + 1] = g
data[index + 2] = b
def _make_image_surface(bitmap, copy=True):
"""Convert FreeType bitmap to Cairo ImageSurface.
Special thanks to Hintak and his example code:
https://github.com/rougier/freetype-py/blob/master/examples/bitmap_to_surface.py
TODO (M Foley) understand this better and see if a more elegant
solution exists."""
content = bitmap._FT_Bitmap
cairo_format = FORMAT_A8
src_pitch = content.pitch
dst_pitch = ImageSurface.format_stride_for_width(cairo_format,
content.width)
pixels = _to_array(content, content.pixel_mode, dst_pitch)
result = ImageSurface.create_for_data(pixels, cairo_format, content.width,
content.rows, dst_pitch)
return result
def draw(self, target: cairo.ImageSurface):
saved = self.positions, self.t
n = 4
lookahead = 0.2
dt = lookahead / n
targets = []
for _ in range(n):
image = cairo.ImageSurface(cairo.Format.RGB24, target.get_width(),
target.get_height())
self.draw_frame(image)
targets.append(image)
self.step(dt)
data = target.get_data()
for i in range(len(data)):
data[i] = int(sum(img.get_data()[i] for img in targets) / n)
self.positions, self.t = saved
def convert_to_png(input_file, output_file, width=None, height=None):
"""Convert svg to png."""
if width and height:
handle = Rsvg.Handle()
svg = handle.new_from_file(input_file)
dim = svg.get_dimensions()
img = ImageSurface(
FORMAT_ARGB32, width, height)
ctx = Context(img)
ctx.scale(width / dim.width, height / dim.height)
svg.render_cairo(ctx)
png_io = BytesIO()
img.write_to_png(png_io)
with open(output_file, 'wb') as fout:
fout.write(png_io.getvalue())
fout.close()
svg.close()
png_io.close()
img.finish()
else:
with open(input_file, "r") as content_file:
svg = content_file.read()
content_file.close()
fout = open(output_file, "wb")
svg2png(bytestring=bytes(svg, "UTF-8"), write_to=fout)
fout.close()
def convert_svg2png(infile, outfile, w, h):
"""
Converts svg files to png using Cairosvg or Inkscape
@file_path : String; the svg file absolute path
@dest_path : String; the png file absolute path
"""
if use_inkscape:
cmd = Popen(["inkscape", "-z", "-f", infile, "-e", outfile,
"-w", str(w), "-h", str(h)],
stdout=PIPE, stderr=PIPE)
cmd.communicate()
else:
handle = Rsvg.Handle()
svg = handle.new_from_file(infile)
dim = svg.get_dimensions()
img = ImageSurface(FORMAT_ARGB32, w, h)
ctx = Context(img)
ctx.scale(w / dim.width, h / dim.height)
svg.render_cairo(ctx)
png_io = BytesIO()
img.write_to_png(png_io)
with open(outfile, 'wb') as fout:
fout.write(png_io.getvalue())
svg.close()
png_io.close()
img.finish()
def __init__ (self, imagePaths):
gtk.DrawingArea.__init__(self)
self.set_events(gtk.gdk.EXPOSURE_MASK | gtk.gdk.BUTTON_PRESS_MASK)
self.connect("expose-event", self.draw)
self.connect("button_press_event", self.buttonPress)
self.surfaces = [ImageSurface.create_from_png(path) for path in imagePaths]
self.current = 0
width, height = self.surfaces[0].get_width(), self.surfaces[0].get_height()
self.size = gtk.gdk.Rectangle(0, 0, width, height)
self.set_size_request(width, height)
def _scale_down(self, handle, ratio):
xsize, ysize = self.size
if ratio >= 1.0:
# Convert
surface = ImageSurface(FORMAT_ARGB32, xsize, ysize)
ctx = Context(surface)
else:
# Scale
xsize, ysize = int(xsize * ratio), int(ysize * ratio)
surface = ImageSurface(FORMAT_ARGB32, xsize, ysize)
ctx = Context(surface)
ctx.scale(ratio, ratio)
# Render
handle.render_cairo(ctx)
# Transform to a PIL image for further manipulation
size = (xsize, ysize)
im = frombuffer('RGBA', size, surface.get_data(), 'raw', 'BGRA', 0, 1)
surface.finish()
return im, xsize, ysize
def __init__ (self, imagePaths):
GObject.GObject.__init__(self)
self.set_events(Gdk.EventMask.EXPOSURE_MASK | Gdk.EventMask.BUTTON_PRESS_MASK)
self.connect("draw", self.draw)
self.connect("button_press_event", self.buttonPress)
self.surfaces = [ImageSurface.create_from_png(path) for path in imagePaths]
self.current = 0
width, height = self.surfaces[0].get_width(), self.surfaces[0].get_height()
self.size = (0, 0, width, height)
self.set_size_request(width, height)
def load_image_at_size(name, width, height):
"""Loads an image file at the specified size. Does NOT handle
exceptions!"""
from gi.repository import GdkPixbuf, Gdk
from cairo import ImageSurface, FORMAT_ARGB32, Context
pixbuf = GdkPixbuf.Pixbuf.new_from_file_at_size(name, width, height)
surface = ImageSurface(FORMAT_ARGB32, width, height)
ctx = Context(surface)
Gdk.cairo_set_source_pixbuf(ctx, pixbuf, 0, 0)
ctx.paint()
return surface
def make_image_surface(bitmap, copy=True):
if (type(bitmap) == FT_Bitmap):
# bare FT_Bitmap
content = bitmap
else:
# wrapped Bitmap instance
content = bitmap._FT_Bitmap
"creates a Cairo ImageSurface containing (a copy of) the Bitmap pixels."
if (False and (byteorder == 'little')
and (content.pixel_mode == FT_PIXEL_MODE_MONO)):
try:
libtiff = CDLL("not")
except:
library = get_handle()
dest = c_void_p()
error = FT_Bitmap_Init(dest)
if error: raise FT_Exception(error)
error = FT_Bitmap_Convert(library, byref(content), dest, 1)
if error: raise FT_Exception(error)
content = dest
if content.pixel_mode == FT_PIXEL_MODE_MONO:
cairo_format = FORMAT_A1
elif content.pixel_mode == FT_PIXEL_MODE_GRAY:
cairo_format = FORMAT_A8
else:
raise NotImplementedError("unsupported bitmap format %d" %
content.pixel_mode)
src_pitch = content.pitch
dst_pitch = ImageSurface.format_stride_for_width(cairo_format,
content.width)
if not copy and dst_pitch == src_pitch and content.buffer != None:
pixels = content.buffer
else:
pixels = to_array(content, content.pixel_mode, dst_pitch)
result = ImageSurface.create_for_data(pixels, cairo_format, content.width,
content.rows, dst_pitch)
return result
def plugmap(w, s, e, n):
west = open_df.long.min()
south = open_df.lat.min()
east = open_df.long.max()
north = open_df.lat.max()
zoom = 5 #
tiles = list(mercantile.tiles(west, south, east, north, zoom))
print(tiles)
tile_size = (256, 256)
# создаем пустое изображение в которое как мозайку будем вставлять тайлы
# для начала просто попробуем отобразить все четыре тайла в строчку
map_image = ImageSurface(FORMAT_ARGB32, tile_size[0] * len(tiles),
tile_size[1])
# создаем контекст для рисования
ctx = Context(map_image)
for idx, t in enumerate(tiles):
server = random.choice(['a', 'b', 'c'
]) # у OSM три сервера, распределяем нагрузку
url = 'http://{server}.tile.openstreetmap.org/{zoom}/{x}/{y}.png'.format(
server=server, zoom=t.z, x=t.x, y=t.y)
# запрашиваем изображение
response = urllib.request.urlopen(url)
# создаем cairo изображние
img = ImageSurface.create_from_png(io.BytesIO(response.read()))
# рисуем изображение, с правильным сдвигом по оси x
ctx.set_source_surface(img, idx * tile_size[0], 0)
ctx.paint()
# сохраняем собраное изображение в файл
with open("map.png", "wb") as f:
map_image.write_to_png(f)
def get_mmap_image(mmap):
""" Render a Map to an ImageSurface.
"""
handle, filename = mkstemp(suffix=".png")
try:
close(handle)
mmap.draw(fatbits_ok=True).save(filename)
img = ImageSurface.create_from_png(filename)
finally:
unlink(filename)
return img
def get_mmap_image(mmap):
""" Render a Map to an ImageSurface.
"""
handle, filename = mkstemp(suffix='.png')
try:
close(handle)
mmap.draw(fatbits_ok=True).save(filename)
img = ImageSurface.create_from_png(filename)
finally:
unlink(filename)
return img
def draw_progress_overlay(self):
if not self.text:
# Nothing useful to draw, return now!
return
if (self.resized() or self.fraction != self.prev_fraction
or self.progress_overlay is None):
# Need to recreate the cache drawing
self.progress_overlay = ImageSurface(FORMAT_ARGB32, self.width,
self.height)
ctx = Context(self.progress_overlay)
ctx.set_source_rgba(0.1, 0.1, 0.1, 0.3) # Transparent
ctx.rectangle(0, 0, self.width * self.fraction, self.height)
ctx.fill()
self.cr.set_source_surface(self.progress_overlay)
self.cr.paint()
def __init__(self, image_paths):
GObject.GObject.__init__(self)
self.set_events(Gdk.EventMask.EXPOSURE_MASK |
Gdk.EventMask.BUTTON_PRESS_MASK)
self.connect("draw", self.draw)
self.connect("button_press_event", self.buttonPress)
self.surfaces = [ImageSurface.create_from_png(path)
for path in image_paths]
self.current = 0
width, height = self.surfaces[0].get_width(), self.surfaces[
0].get_height()
self.size = (0, 0, width, height)
self.set_size_request(width, height)
def __init__(self):
Gtk.Window.__init__(self, type=Gtk.WindowType.TOPLEVEL)
self.set_size_request(W, H)
self.connect("delete_event", Gtk.main_quit)
self.set_decorated(True)
self.set_app_paintable(True)
self.drawing_area = Gtk.DrawingArea()
self.drawing_area.connect("draw", self.widget_draw)
self.add(self.drawing_area)
self.show_all()
self.backing = ImageSurface(FORMAT_ARGB32, W, H)
rgb_data = b"\120" * W * H * 4
self.paint_rgb(rgb_data, W, H)
img = Image.open("./fs/share/icons/xpra.png")
w, h = img.size
self.paint_image(img, 0, 0, w, h)
def __init__(self, width, height):
self.xform = lambda x, y: (x, y)
self.img = ImageSurface(FORMAT_RGB24, width, height)
self.ctx = Context(self.img)
self.ctx.move_to(0, 0)
self.ctx.line_to(width, 0)
self.ctx.line_to(width, height)
self.ctx.line_to(0, height)
self.ctx.line_to(0, 0)
self.ctx.set_source_rgb(1, 1, 1)
self.ctx.fill()
self.width = width
self.height = height
def resize(img,widget):
def progress():
name=img.split("/")[-1]
im1=Image.open(tmp+name+"scaled.png")
x=cx.get_text()
im2=im1.crop((int(x),0,int(x)+240,400))
im2.save(tmp+name+"resized.jpg")
widget.set_from_file(tmp+name+"resized.jpg")
control()
w.destroy()
def move_rectangle():
x=im.get_pointer()[0]
cr=im.window.cairo_create()
cr.set_source_surface(sf)
cr.paint()
cr.set_source_rgba(0,0,0,1)
cr.rectangle(x,0,240,400)
cr.stroke()
cx.set_text(str(x))
im1=Image.open(img)
a,b,c,d=im1.getbbox()
x=(400*c)/d
y=400
im2=im1.resize((x,y),Image.ANTIALIAS)
name=img.split("/")[-1]
im2.save(tmp+name+"scaled.png")
w=gtk.Window()
w.set_size_request(x,y+30)
w.set_resizable(False)
w.set_title("Ritaglio Immagine..")
vb=gtk.VBox()
w.add(vb)
im=gtk.DrawingArea()
im.set_events(gtk.gdk.BUTTON_PRESS_MASK | gtk.gdk.BUTTON_RELEASE_MASK | gtk.gdk.BUTTON1_MOTION_MASK)
vb.add(im)
im.connect("motion-notify-event", lambda *w: move_rectangle())
im.connect("expose-event", lambda *w: move_rectangle())
butt=gtk.Button("Ok")
butt.set_size_request(80,30)
vb.add(butt)
vb.set_child_packing(butt,expand=False,fill=False, padding=0,pack_type=gtk.PACK_END)
butt.connect("clicked",lambda *w: progress())
w.show_all()
sf=ImageSurface.create_from_png(tmp+name+"scaled.png")
def get_qrcode_image(print_href):
""" Render a QR code to an ImageSurface.
"""
scheme, host, path, p, query, f = urlparse(print_href)
print_path = scheme + '://' + host + path
print_id = parse_qs(query).get('id', [''])[0]
q = {'print': print_id}
u = urljoin(print_path, 'code.php') + '?' + urlencode(q)
handle, filename = mkstemp(suffix='.png')
try:
write(handle, urlopen(u).read())
close(handle)
img = ImageSurface.create_from_png(filename)
finally:
unlink(filename)
return img
def get_qrcode_image(print_href):
""" Render a QR code to an ImageSurface.
"""
scheme, host, path, p, query, f = urlparse(print_href)
print_path = scheme + "://" + host + path
print_id = parse_qs(query).get("id", [""])[0]
q = {"print": print_id}
u = urljoin(print_path, "code.php") + "?" + urlencode(q)
handle, filename = mkstemp(suffix=".png")
try:
write(handle, urlopen(u).read())
close(handle)
img = ImageSurface.create_from_png(filename)
finally:
unlink(filename)
return img
def get_map_image(bbox, width, height, marker, target_dpi=150):
""" Get a cairo ImageSurface for a given bounding box, plus the (x, y) point of a marker.
Try to match a target DPI. Width and height are given in millimeters!
"""
template = 'http://a.tile.cloudmade.com/1a914755a77758e49e19a26e799268b7/22677/256/{Z}/{X}/{Y}.png'
provider = TemplatedMercatorProvider(template)
locA, locB = Location(bbox[0], bbox[1]), Location(bbox[2], bbox[3])
aspect = float(width) / float(height)
mmaps = [mapByExtentZoomAspect(provider, locA, locB, zoom, aspect)
for zoom in range(10, 19)]
inches_wide = width * ptpmm * inppt
resolutions = [(mmap.dimensions.x / inches_wide, mmap) for mmap in mmaps]
differences = [(abs(dpi - target_dpi), mmap) for (dpi, mmap) in resolutions]
diff, mmap = sorted(differences)[0]
if (mmap.dimensions.x * mmap.dimensions.y) > (4000 * 4000):
raise ValueError('Requested map is too large: %d x %d' % (mmap.dimensions.x, mmap.dimensions.y))
image_path = get_map_cache_path(mmap)
if not exists(image_path):
print 'no', image_path
mmap.draw().save(image_path)
img = ImageSurface.create_from_png(image_path)
point = mmap.locationPoint(marker)
x = width * point.x / mmap.dimensions.x
y = height * point.y / mmap.dimensions.y
return img, (x, y)
# Normal(8-bit) Rendering
face.load_char('S', FT_LOAD_RENDER |
FT_LOAD_TARGET_NORMAL )
else:
# Mono(1-bit) Rendering
face.load_char('S', FT_LOAD_RENDER |
FT_LOAD_TARGET_MONO )
bitmap = face.glyph.bitmap
width = face.glyph.bitmap.width
rows = face.glyph.bitmap.rows
pitch = face.glyph.bitmap.pitch
glyph_surface = make_image_surface(face.glyph.bitmap)
surface = ImageSurface(FORMAT_ARGB32, 800, 600)
ctx = Context(surface)
ctx.rectangle(0,0,800,600)
ctx.set_line_width(0)
ctx.set_source_rgb (0.5 , 0.5, 0.5)
ctx.fill()
#
scale = 480.0 / rows
ctx.set_source_surface(glyph_surface, 0, 0)
pattern = ctx.get_source()
SurfacePattern.set_filter(pattern, FILTER_BEST)
scalematrix = Matrix()
scalematrix.scale(1.0/scale,1.0/scale)
scalematrix.translate(-(400.0 - width *scale /2.0 ), -60)
pattern.set_matrix(scalematrix)
ctx.set_source_rgb (0 , 0, 1)
if __name__ == '__main__':
from PIL import Image
face = Face('./Vera.ttf')
face.set_char_size( 4*48*64 )
flags = FT_LOAD_DEFAULT | FT_LOAD_NO_BITMAP
face.load_char('S', flags )
slot = face.glyph
glyph = slot.get_glyph()
stroker = Stroker( )
stroker.set(64, FT_STROKER_LINECAP_ROUND, FT_STROKER_LINEJOIN_ROUND, 0 )
glyph.stroke( stroker , True )
blyph = glyph.to_bitmap(FT_RENDER_MODE_NORMAL, Vector(0,0), True )
bitmap = blyph.bitmap
width, rows, pitch = bitmap.width, bitmap.rows, bitmap.pitch
surface = ImageSurface(FORMAT_ARGB32, 600, 800)
ctx = Context(surface)
Z = make_image_surface(bitmap)
ctx.set_source_surface(Z, 0, 0)
scale = 640.0 / rows
patternZ = ctx.get_source()
SurfacePattern.set_filter(patternZ, FILTER_BEST)
scalematrix = Matrix()
scalematrix.scale(1.0/scale,1.0/scale)
scalematrix.translate(-(300.0 - width *scale /2.0 ), -80)
patternZ.set_matrix(scalematrix)
ctx.set_source_rgb (0 , 0, 1)
ctx.mask(patternZ)
ctx.fill()
surface.flush()
surface.write_to_png("glyph-outline-cairo.png")
def make_label(text, filename, size=12, angle=0):
'''
Parameters:
-----------
text : string
Text to be displayed
filename : string
Path to a font
size : int
Font size in 1/64th points
angle : float
Text angle in degrees
'''
face = Face(filename)
face.set_char_size( size*64 )
# FT_Angle is a 16.16 fixed-point value expressed in degrees.
angle = FT_Angle(angle * 65536)
matrix = FT_Matrix( FT_Cos( angle ),
- FT_Sin( angle ),
FT_Sin( angle ) ,
FT_Cos( angle ) )
flags = FT_LOAD_RENDER
pen = FT_Vector(0,0)
FT_Set_Transform( face._FT_Face, byref(matrix), byref(pen) )
previous = 0
xmin, xmax = 0, 0
ymin, ymax = 0, 0
for c in text:
face.load_char(c, flags)
kerning = face.get_kerning(previous, c)
previous = c
bitmap = face.glyph.bitmap
pitch = face.glyph.bitmap.pitch
width = face.glyph.bitmap.width
rows = face.glyph.bitmap.rows
top = face.glyph.bitmap_top
left = face.glyph.bitmap_left
pen.x += kerning.x
x0 = (pen.x >> 6) + left
x1 = x0 + width
y0 = (pen.y >> 6) - (rows - top)
y1 = y0 + rows
xmin, xmax = min(xmin, x0), max(xmax, x1)
ymin, ymax = min(ymin, y0), max(ymax, y1)
pen.x += face.glyph.advance.x
pen.y += face.glyph.advance.y
L = ImageSurface(FORMAT_A8, xmax-xmin, ymax-ymin)
previous = 0
pen.x, pen.y = 0, 0
ctx = Context(L)
for c in text:
face.load_char(c, flags)
kerning = face.get_kerning(previous, c)
previous = c
bitmap = face.glyph.bitmap
pitch = face.glyph.bitmap.pitch
width = face.glyph.bitmap.width
rows = face.glyph.bitmap.rows
top = face.glyph.bitmap_top
left = face.glyph.bitmap_left
pen.x += kerning.x
x = (pen.x >> 6) - xmin + left
y = - (pen.y >> 6) + ymax - top
if (width > 0):
glyph_surface = make_image_surface(face.glyph.bitmap)
ctx.set_source_surface(glyph_surface, x, y)
ctx.paint()
pen.x += face.glyph.advance.x
pen.y += face.glyph.advance.y
L.flush()
return L
slot = face.glyph
# First pass to compute bbox
width, height, baseline = 0, 0, 0
previous = 0
for i,c in enumerate(text):
face.load_char(c)
bitmap = slot.bitmap
height = max(height,
bitmap.rows + max(0,-(slot.bitmap_top-bitmap.rows)))
baseline = max(baseline, max(0,-(slot.bitmap_top-bitmap.rows)))
kerning = face.get_kerning(previous, c)
width += (slot.advance.x >> 6) + (kerning.x >> 6)
previous = c
Z = ImageSurface(FORMAT_A8, width, height)
ctx = Context(Z)
# Second pass for actual rendering
x, y = 0, 0
previous = 0
for c in text:
face.load_char(c)
bitmap = slot.bitmap
top = slot.bitmap_top
left = slot.bitmap_left
w,h = bitmap.width, bitmap.rows
y = height-baseline-top
kerning = face.get_kerning(previous, c)
x += (kerning.x >> 6)
# cairo does not like zero-width bitmap from the space character!
def add_print_page(ctx, mmap, href, well_bounds_pt, points_FG, hm2pt_ratio):
"""
"""
print 'Adding print page:', href
well_xmin_pt, well_ymin_pt, well_xmax_pt, well_ymax_pt = well_bounds_pt
well_width_pt, well_height_pt = well_xmax_pt - well_xmin_pt, well_ymax_pt - well_ymin_pt
#
# Offset drawing area to top-left of map area
#
ctx.translate(well_xmin_pt, well_ymin_pt)
#
# Build up map area
#
draw_box(ctx, 0, 0, well_width_pt, well_height_pt)
ctx.set_source_rgb(.9, .9, .9)
ctx.fill()
img = get_mmap_image(mmap)
place_image(ctx, img, 0, 0, well_width_pt, well_height_pt)
#
# Calculate positions of registration points
#
ctx.save()
ctx.translate(well_width_pt, well_height_pt)
ctx.scale(1/hm2pt_ratio, 1/hm2pt_ratio)
reg_points = (point_A, point_B, point_C, point_D, point_E) + points_FG
device_points = [ctx.user_to_device(pt.x, pt.y) for pt in reg_points]
ctx.restore()
#
# Draw QR code area
#
ctx.save()
ctx.translate(well_width_pt, well_height_pt)
draw_box(ctx, 0, 0, -90, -90)
ctx.set_source_rgb(1, 1, 1)
ctx.fill()
place_image(ctx, get_qrcode_image(href), -83, -83, 83, 83)
ctx.restore()
#
# Draw registration points
#
for (x, y) in device_points:
x, y = ctx.device_to_user(x, y)
draw_circle(ctx, x, y, .12 * ptpin)
ctx.set_source_rgb(0, 0, 0)
ctx.set_line_width(.5)
ctx.set_dash([1.5, 3])
ctx.stroke()
for (x, y) in device_points:
x, y = ctx.device_to_user(x, y)
draw_circle(ctx, x, y, .12 * ptpin)
ctx.set_source_rgb(1, 1, 1)
ctx.fill()
for (x, y) in device_points:
x, y = ctx.device_to_user(x, y)
draw_circle(ctx, x, y, .06 * ptpin)
ctx.set_source_rgb(0, 0, 0)
ctx.fill()
#
# Draw top-left icon
#
icon = pathjoin(dirname(__file__), '../site/lib/print/icon.png')
img = ImageSurface.create_from_png(icon)
place_image(ctx, img, 0, -29.13, 19.2, 25.6)
try:
font = create_cairo_font_face_for_file('fonts/LiberationSans-Bold.ttf')
except:
# no text for us.
pass
else:
# draw some text.
ctx.set_font_face(font)
ctx.set_font_size(24)
ctx.move_to(0 + 19.2 + 8, -29.13 + 25.6 - 1)
ctx.show_text('Walking Papers')
try:
font = create_cairo_font_face_for_file('fonts/LiberationSans-Regular.ttf')
except:
# no text for us.
pass
else:
ctx.set_font_face(font)
ctx.set_font_size(8)
lines = ['OSM data ©2011 CC-BY-SA Openstreetmap.org contributors.',
'Help improve OpenStreetMap by drawing on this map, then visit',
href or '']
text_width = max([ctx.text_extents(line)[2] for line in lines])
ctx.move_to(well_width_pt - text_width, -25)
ctx.show_text(lines[0])
ctx.move_to(well_width_pt - text_width, -15)
ctx.show_text(lines[1])
ctx.move_to(well_width_pt - text_width, -5)
ctx.show_text(lines[2])
ctx.show_page()
glyph_surface = make_image_surface(face.glyph.bitmap)
ctx.set_source_surface(glyph_surface, x, y)
ctx.paint()
pen.x += face.glyph.advance.x
pen.y += face.glyph.advance.y
L.flush()
return L
if __name__ == '__main__':
from PIL import Image
n_words = 200
H, W, dpi = 600, 800, 72.0
I = ImageSurface(FORMAT_A8, W, H)
ctxI = Context(I)
ctxI.rectangle(0,0,800,600)
ctxI.set_source_rgba (0.9, 0.9, 0.9, 0)
ctxI.fill()
S = random.normal(0,1,n_words)
S = (S-S.min())/(S.max()-S.min())
S = sort(1-sqrt(S))[::-1]
sizes = (12 + S*48).astype(int).tolist()
def spiral():
eccentricity = 1.5
radius = 8
step = 0.1
t = 0
while True:
face = freetype.Face("/System/Library/Fonts/Apple Color Emoji.ttc")
# Not all char sizes are valid for emoji fonts;
# Google's NotoColorEmoji only accept size 109 to get 136x128 bitmaps
face.set_char_size( 160*64 )
face.load_char('😀', freetype.FT_LOAD_COLOR)
bitmap = face.glyph.bitmap
width = face.glyph.bitmap.width
rows = face.glyph.bitmap.rows
# The line below depends on this assumption. Check.
if ( face.glyph.bitmap.pitch != width * 4 ):
raise RuntimeError('pitch != width * 4 for color bitmap: Please report this.')
bitmap = np.array(bitmap.buffer, dtype=np.uint8).reshape((bitmap.rows,bitmap.width,4))
I = ImageSurface(FORMAT_ARGB32, width, rows)
try:
ndI = np.ndarray(shape=(rows,width), buffer=I.get_data(),
dtype=np.uint32, order='C',
strides=[I.get_stride(), 4])
except NotImplementedError:
raise SystemExit("For python 3.x, you need pycairo >= 1.11+ (from https://github.com/pygobject/pycairo)")
# Although both are 32-bit, cairo is host-order while
# freetype is small endian.
ndI[:,:] = bitmap[:,:,3] * 2**24 + bitmap[:,:,2] * 2**16 + bitmap[:,:,1] * 2**8 + bitmap[:,:,0]
I.mark_dirty()
surface = ImageSurface(FORMAT_ARGB32, 2*width, rows)
ctx = Context(surface)
image = Image.open(image_row['full_img'])
except Exception, e:
logging.error("failed to open %s because '%s'" % (image_row['full_img'], e))
logging.info("returning a blank image for %s" % image_row['full_img'])
image = Image.new('RGBA', (500, 375))
width, height = image.size
aspect = float(width) / float(height)
handle, png_path = mkstemp(dir='.', suffix='.png')
image.save(png_path)
try:
image = ImageSurface.create_from_png(png_path)
except Exception, e:
logging.error("failed to create image surface for %s because '%s'" % (image_row['full_img'], e))
image = Image.new('RGBA', (500, 375))
width, height = image.size
aspect = float(width) / float(height)
handle, png_path = mkstemp(dir='.', suffix='.png')
image.save(png_path)
image = ImageSurface.create_from_png(png_path)
remove(png_path)
close(handle)
def _paint_panel(self, key, width, height, panel_h):
self.db.IUD("update web_stat_panels set HEIGHT = %s where ID = %s" % (panel_h, key))
self.db.commit()
color_x_line = (0.7, 0.7, 0.7)
color_x_line_2 = (0.9, 0.9, 0.9)
color_y_line = (0.9, 0.9, 0.9)
color_y_line_date = (0.7, 0.7, 0.7)
color_border = (0.5, 0.5, 0.5)
left = 40
right = 10
bottom = 15
var_ids = "0"
series = [0, 0, 0, 0]
typ = 0
for row in self.db.select(
"select SERIES_1, SERIES_2, SERIES_3, SERIES_4, TYP " " from web_stat_panels " " where ID = " + str(key)
):
series = row
var_ids = "%s, %s, %s, %s" % row[0:4]
typ = row[4]
width, height = int(width), int(height)
if width <= 0:
width = 300
if height <= 0:
height = 150
interval = self.param("range")
delta_x = 1
if interval == "-6 hour":
delta_x = 6 * 3600
elif interval == "-12 hour":
delta_x = 12 * 3600
elif interval == "-1 day":
delta_x = 24 * 3600
elif interval == "-3 day":
delta_x = 3 * 24 * 3600
elif interval == "-7 day":
delta_x = 7 * 24 * 3600
elif interval == "-14 day":
delta_x = 14 * 24 * 3600
elif interval == "-30 day":
delta_x = 30 * 24 * 3600
elif interval == "-90 day":
delta_x = 3 * 30 * 24 * 3600
elif interval == "-180 day":
delta_x = 6 * 30 * 24 * 3600
elif interval == "-360 day":
delta_x = 12 * 30 * 24 * 3600
min_x = int(self.param("start")) - delta_x // 2
max_x = min_x + delta_x
min_x_q = min_x - delta_x # // 100
max_x_q = max_x + delta_x # // 100
max_y = -9999
min_y = 9999
# Делаем полную выборку данных. Выкидываем подозрительные точки и
# собираем статистику.
prev_vals = [-9999] * 4
chart_data = [[], [], [], []]
zoom_step = delta_x / (width * 5)
if zoom_step < 1 or typ != 0:
zoom_step = 1
x_min_max_values = []
mi_x = max_x_q
ma_x = min_x_q
tt = -100
for row in self.db.select(
"select UNIX_TIMESTAMP(CHANGE_DATE) D, MIN(VALUE) + (MAX(VALUE) - MIN(VALUE)) VALUE, VARIABLE_ID "
" from core_variable_changes "
" where VARIABLE_ID in (%s) "
" and CHANGE_DATE >= FROM_UNIXTIME(%s) "
" and CHANGE_DATE <= FROM_UNIXTIME(%s) "
" group by 3, ROUND(UNIX_TIMESTAMP(CHANGE_DATE) / %s)"
" order by 3, 1 " % (var_ids, min_x_q, max_x_q, zoom_step)
):
ind = series.index(row[2])
chart_data[ind] += [row]
if row[0] > min_x and row[0] < max_x:
max_y = max(max_y, row[1])
min_y = min(min_y, row[1])
if tt == -100:
tt = row[2]
if tt != row[2]:
v = [tt, mi_x, ma_x]
x_min_max_values += [v]
mi_x = max_x_q
ma_x = min_x_q
tt = row[2]
if row[0] < mi_x:
mi_x = row[0]
if row[0] > ma_x:
ma_x = row[0]
if tt != -1:
v = [tt, mi_x, ma_x]
x_min_max_values += [v]
# print(x_min_max_values)
# print(series)
"""
for row in self.db.select("select UNIX_TIMESTAMP(CHANGE_DATE) D, VALUE, VARIABLE_ID, ID "
" from core_variable_changes "
" where VARIABLE_ID in (" + var_ids + ") "
" and CHANGE_DATE >= FROM_UNIXTIME(%s) "
" and CHANGE_DATE <= FROM_UNIXTIME(%s) "
"order by CHANGE_DATE " % (min_x_q, max_x_q)):
"""
"""
try:
self.db.IUD("set @rn := 0")
sql = ("select UNIX_TIMESTAMP(CHANGE_DATE) D, VALUE, VARIABLE_ID, ID "
" from core_variable_changes "
" where VARIABLE_ID in (" + var_ids + ") "
" and CHANGE_DATE >= FROM_UNIXTIME(%s) "
" and CHANGE_DATE <= FROM_UNIXTIME(%s) "
"order by CHANGE_DATE " % (min_x_q, max_x_q))
for c in self.db.select("select count(*) c "
" from core_variable_changes "
" where VARIABLE_ID in (" + var_ids + ") "
" and CHANGE_DATE >= FROM_UNIXTIME(%s) "
" and CHANGE_DATE <= FROM_UNIXTIME(%s) " % (min_x_q, max_x_q)):
cou = c[0]
ccc = 1000 * 4
if cou > ccc:
sql = ("select UNIX_TIMESTAMP(CHANGE_DATE) D, VALUE, VARIABLE_ID, ID, @rn := @rn + 1 rownum "
" from core_variable_changes "
" where VARIABLE_ID in (" + var_ids + ") "
" and CHANGE_DATE >= FROM_UNIXTIME(%s) "
" and CHANGE_DATE <= FROM_UNIXTIME(%s) "
"having mod(rownum, %s) = 0 "
"order by VARIABLE_ID, CHANGE_DATE " % (min_x_q, max_x_q, math.ceil(cou / ccc)))
for row in self.db.select(sql):
ind = series.index(row[2])
prev_vals[ind] = row[1]
if abs(prev_vals[ind] - row[1]) < 10:
chart_data[ind] += [row]
if row[0] > min_x and row[0] < max_x:
max_y = max(max_y, row[1])
min_y = min(min_y, row[1])
prev_vals[ind] = row[1]
except:
pass
"""
if min_y is None or max_y is None or min_y == 9999 or max_y == -9999 or min_y == max_y:
max_y = 1
min_y = 0
min_y = math.floor(min_y)
max_y = math.ceil(max_y)
if typ == 2:
if min_y < 0 and max_y < 0:
max_y = 0
elif min_y > 0 and max_y > 0:
min_y = 0
# Определяем цвета
colors = [[1, 0, 0], [0, 0.65, 0.31], [0, 0, 1], [1, 0, 1]]
off_y = (max_y - min_y) / 10
min_y -= off_y
max_y += off_y
try:
kx = (max_x - min_x) / (width - left - right)
ky = (max_y - min_y) / (height - bottom)
if ky == 0:
ky = 1
except:
kx, ky = 1, 1
img = ImageSurface(FORMAT_ARGB32, width, height)
ctx = Context(img)
width -= right
ctx.set_line_width(1)
# Рисуем сетку
ctx.set_font_size(12)
try:
b_w, b_h = ctx.text_extents("00-00-0000")[2:4]
# Метки на оси Y
count = math.ceil(max_y) - math.ceil(min_y)
space_count = math.ceil(count / ((height - bottom) / (b_h * 1.5)))
sc = 0
for i in range(math.ceil(min_y), math.ceil(max_y)):
if sc == 0:
y = height - bottom + (min_y - i) / ky
ctx.set_source_rgb(*(color_x_line))
ctx.move_to(left, y)
ctx.line_to(width, y)
ctx.stroke()
ctx.set_source_rgb(0, 0, 0)
num = str(i)
tw, th = ctx.text_extents(num)[2:4]
ctx.move_to(left - 5 - tw, y + th // 2)
ctx.show_text(num)
sc = space_count
sc -= 1
# Метки на оси Х
x_step = 3600
if interval == "-6 hour" or interval == "-12 hour" or interval == "-1 day":
# Дополнительно метки часов
x_step = 3600
for i in range(math.ceil(min_x / x_step), math.ceil(max_x / x_step)):
x = (i * x_step - min_x) / kx + left
ctx.set_source_rgb(*(color_x_line_2))
ctx.move_to(x, 0)
ctx.line_to(x, height - bottom)
ctx.stroke()
num = datetime.datetime.fromtimestamp(i * x_step).strftime("%H")
tw, th = ctx.text_extents(num)[2:4]
ctx.move_to(x + 2, height - bottom - 3)
ctx.set_source_rgb(*(color_x_line))
ctx.show_text(num)
x_step = 3600 * 24
space_count = 1
count = math.ceil(max_x / x_step) - math.ceil(min_x / x_step)
try:
if (width / count) < b_w:
space_count = 2
except:
pass
sc = 0
tz = 3600 * 2
tx_prev = -100
for i in range(math.ceil(min_x / x_step), math.ceil(max_x / x_step) + 1):
if sc == 0:
d_i = datetime.datetime.fromtimestamp(i * x_step)
x = (i * x_step - min_x - tz) / kx + left
ctx.set_source_rgb(0, 0, 0)
num = d_i.strftime("%d-%m-%Y %H")
x -= (int(d_i.strftime("%H")) * 3600 - tz) / kx
tw, th = ctx.text_extents(num)[2:4]
tx = x - tw // 2
ctx.move_to(tx, height - bottom + th + 5)
if tx - tx_prev > tw:
ctx.show_text(num)
tx_prev = tx
ctx.set_source_rgb(*(color_y_line_date))
else:
ctx.set_source_rgb(*(color_y_line))
if x >= left and x < width:
ctx.move_to(x, 0)
ctx.line_to(x, height - bottom)
ctx.stroke()
sc = space_count
sc -= 1
except Exception as e:
pass
# Рисуем верхний и правый бордер
ctx.set_source_rgb(*color_border)
ctx.move_to(left, 0)
ctx.line_to(width, 0)
ctx.line_to(width, height - bottom)
ctx.stroke()
# Рисуем сами графики
ctx.rectangle(left, 0, width - left, height)
ctx.clip()
is_first = True
currVarID = -1
prevX = -1
if typ == 0: # Линейная
for ind in range(4):
"""
if len(chart_data[ind]) > 0:
for i in range(len(chart_data[ind]) - 1):
chart_data[ind][i] = list(chart_data[ind][i])
r1 = chart_data[ind][i]
r2 = chart_data[ind][i + 1]
chart_data[ind][i][0] += (r2[0] - r1[0]) / 2
chart_data[ind][i][1] += (r2[1] - r1[1]) / 2
"""
ctx.set_source_rgb(*colors[ind])
is_first = True
for row in chart_data[ind]:
x = (row[0] - min_x) / kx + left
y = height - bottom - (row[1] - min_y) / ky
if is_first:
ctx.move_to(x, y)
else:
if row[0] - prevX > 10000:
ctx.move_to(x, y)
else:
ctx.line_to(x, y)
prevX = row[0]
is_first = False
ctx.stroke()
elif typ == 1: # Точечная
for ind in range(4):
if chart_data[ind]:
ctx.set_source_rgb(*colors[ind])
for row in chart_data[ind]:
x = (row[0] - min_x) / kx + left
y = height - bottom - (row[1] - min_y) / ky
ctx.rectangle(x - 3, y - 3, 6, 6)
ctx.fill()
elif typ == 2: # Столбчатая
cy = height - bottom - (-min_y) / ky
for ind in range(4):
for row in chart_data[ind]:
if currVarID != row[2]:
ctx.fill()
for i in range(4):
if series[i] == row[2]:
ctx.set_source_rgb(*colors[i])
x = (row[0] - min_x) / kx + left
y = height - bottom - (row[1] - min_y) / ky
ctx.rectangle(x - 5, y, 10, cy - y)
currVarID = row[2]
ctx.fill()
else: # Линейчастая
# one_vals = self._get_one_val(series, min_x_q, max_x_q)
one_vals = self._get_one_val(series, x_min_max_values, min_x_q, max_x_q)
for ind in range(4):
if series[ind]:
is_now = True
for r in one_vals[ind]:
if r[4] == 1:
chart_data[ind].insert(0, r)
else:
chart_data[ind] += [r]
is_now = False
if is_now:
if len(chart_data[ind]) > 0:
r = list(chart_data[ind][len(chart_data[ind]) - 1])
r[0] = datetime.datetime.now().timestamp()
chart_data[ind] += [r]
color = colors[ind]
color_fill = color.copy()
color_fill += [0.3]
is_first = True
y0 = height - bottom + min_y / ky
for row in chart_data[ind]:
x = (row[0] - min_x) / kx + left
y = height - bottom - (row[1] - min_y) / ky
if is_first:
is_first = False
else:
ctx.set_source_rgb(*color)
ctx.move_to(prevX, prevY)
ctx.line_to(x, prevY)
ctx.line_to(x, y)
ctx.stroke()
ctx.set_source_rgba(*color_fill)
rx, ry, rw, rh = prevX, y0, x - prevX, prevY - y0
ctx.rectangle(rx, ry, rw, rh)
ctx.fill()
prevX, prevY = x, y
# Рисуем оси
ctx.set_source_rgb(0, 0, 0)
ctx.move_to(left, 0)
ctx.line_to(left, height - bottom)
ctx.line_to(width, height - bottom)
ctx.stroke()
# ---------------------------
del ctx
byt = BytesIO()
img.write_to_png(byt)
byt.seek(0)
return byt.read()
# Replacement for Path enums:
STOP, MOVETO, LINETO, CURVE3, CURVE4 = 0, 1, 2, 3, 4
face = Face('./Vera.ttf')
face.set_char_size( 48*64 )
face.load_char('S')
slot = face.glyph
outline = slot.outline
points = numpy.array(outline.points, dtype=[('x',float), ('y',float)])
x, y = points['x'], points['y']
cbox = outline.get_cbox()
surface = ImageSurface(FORMAT_ARGB32,
(cbox.xMax - cbox.xMin)//4 + 20,
(cbox.yMax - cbox.yMin)//4 + 20)
ctx = Context(surface)
ctx.scale(0.25,0.25)
ctx.translate(-cbox.xMin + 40,-cbox.yMin + 40)
ctx.transform(Matrix(1,0,0,-1))
ctx.translate(0, -(cbox.yMax + cbox.yMin)) # difference!
Curve_Tag = [FT_Curve_Tag(tag) for tag in outline.tags]
start, end = 0, 0
VERTS, CODES = [], []
# Iterate over each contour
ctx.set_source_rgb(0.5,0.5,0.5)
for i in range(len(outline.contours)):
from PIL import Image
from numpy import ndarray, ubyte, uint32
face = Face('./Vera.ttf')
face.set_char_size( 48*64 )
face.load_char('S', FT_LOAD_RENDER |
FT_LOAD_TARGET_LCD )
bitmap = face.glyph.bitmap
width = face.glyph.bitmap.width//3
rows = face.glyph.bitmap.rows
pitch = face.glyph.bitmap.pitch
copybuffer = (c_ubyte * (pitch * rows))()
memmove(pointer(copybuffer), bitmap._FT_Bitmap.buffer,
pitch * rows)
I = ImageSurface(FORMAT_ARGB32, width, rows)
ndR = ndarray(shape=(rows,width), buffer=copybuffer,
dtype=ubyte, order='C',
offset=0,
strides=[pitch, 3])
ndG = ndarray(shape=(rows,width), buffer=copybuffer,
dtype=ubyte, order='C',
offset=1,
strides=[pitch, 3])
ndB = ndarray(shape=(rows,width), buffer=copybuffer,
dtype=ubyte, order='C',
offset=2,
strides=[pitch, 3])
try:
ndI = ndarray(shape=(rows,width), buffer=I.get_data(),
dtype=uint32, order='C',
def add_print_page(ctx, mmap, href, well_bounds_pt, points_FG, hm2pt_ratio, layout, text, mark, fuzzy, indexees):
"""
"""
print "Adding print page:", href
well_xmin_pt, well_ymin_pt, well_xmax_pt, well_ymax_pt = well_bounds_pt
well_width_pt, well_height_pt = well_xmax_pt - well_xmin_pt, well_ymax_pt - well_ymin_pt
well_aspect_ratio = well_width_pt / well_height_pt
#
# Offset drawing area to top-left of map area
#
ctx.translate(well_xmin_pt, well_ymin_pt)
#
# Build up map area
#
img = get_mmap_image(mmap)
if layout == "half-page" and well_aspect_ratio > 1:
map_width_pt, map_height_pt = well_width_pt / 2, well_height_pt
add_page_text(ctx, text, map_width_pt + 24, 24, map_width_pt - 48, map_height_pt - 48)
elif layout == "half-page" and well_aspect_ratio < 1:
map_width_pt, map_height_pt = well_width_pt, well_height_pt / 2
add_page_text(ctx, text, 32, map_height_pt + 16, map_width_pt - 64, map_height_pt - 32)
else:
map_width_pt, map_height_pt = well_width_pt, well_height_pt
place_image(ctx, img, 0, 0, map_width_pt, map_height_pt)
#
# Draw a dot if need be
#
if fuzzy is not None:
loc = Location(fuzzy[1], fuzzy[0])
pt = mmap.locationPoint(loc)
x = map_width_pt * float(pt.x) / mmap.dimensions.x
y = map_height_pt * float(pt.y) / mmap.dimensions.y
draw_circle(ctx, x, y, 20)
ctx.set_source_rgb(0, 0, 0)
ctx.set_line_width(2)
ctx.set_dash([2, 6])
ctx.stroke()
#
# X marks the spot, if needed
#
if mark is not None:
loc = Location(mark[1], mark[0])
pt = mmap.locationPoint(loc)
x = map_width_pt * float(pt.x) / mmap.dimensions.x
y = map_height_pt * float(pt.y) / mmap.dimensions.y
draw_cross(ctx, x, y, 8, 6)
ctx.set_source_rgb(1, 1, 1)
ctx.fill()
draw_cross(ctx, x, y, 8, 4)
ctx.set_source_rgb(0, 0, 0)
ctx.fill()
#
# Perhaps some boxes?
#
page_numbers = []
for page in indexees:
north, west, south, east = page["bounds"]
ul = mmap.locationPoint(Location(north, west))
lr = mmap.locationPoint(Location(south, east))
x1 = map_width_pt * float(ul.x) / mmap.dimensions.x
x2 = map_width_pt * float(lr.x) / mmap.dimensions.x
y1 = map_height_pt * float(ul.y) / mmap.dimensions.y
y2 = map_height_pt * float(lr.y) / mmap.dimensions.y
draw_box(ctx, x1, y1, x2 - x1, y2 - y1)
ctx.set_source_rgb(0, 0, 0)
ctx.set_line_width(1)
ctx.set_dash([])
ctx.stroke()
page_numbers.append((x1, y1, x2, y2, page["number"]))
#
# Calculate positions of registration points
#
ctx.save()
ctx.translate(well_width_pt, well_height_pt)
ctx.scale(1 / hm2pt_ratio, 1 / hm2pt_ratio)
reg_points = (point_A, point_B, point_C, point_D, point_E) + points_FG
device_points = [ctx.user_to_device(pt.x, pt.y) for pt in reg_points]
ctx.restore()
#
# Draw QR code area
#
ctx.save()
ctx.translate(well_width_pt, well_height_pt)
draw_box(ctx, 0, 0, -90, -90)
ctx.set_source_rgb(1, 1, 1)
ctx.fill()
place_image(ctx, get_qrcode_image(href), -83, -83, 83, 83)
ctx.restore()
#
# Draw registration points
#
for (x, y) in device_points:
x, y = ctx.device_to_user(x, y)
draw_circle(ctx, x, y, 0.12 * ptpin)
ctx.set_source_rgb(0, 0, 0)
ctx.set_line_width(0.5)
ctx.set_dash([1.5, 3])
ctx.stroke()
for (x, y) in device_points:
x, y = ctx.device_to_user(x, y)
draw_circle(ctx, x, y, 0.12 * ptpin)
ctx.set_source_rgb(1, 1, 1)
ctx.fill()
for (x, y) in device_points:
x, y = ctx.device_to_user(x, y)
draw_circle(ctx, x, y, 0.06 * ptpin)
ctx.set_source_rgb(0, 0, 0)
ctx.fill()
#
# Draw top-left icon
#
icon = pathjoin(dirname(__file__), "images/logo.png")
img = ImageSurface.create_from_png(icon)
place_image(ctx, img, 0, -36, 129.1, 36)
try:
font_file = realpath("fonts/Helvetica.ttf")
if font_file not in cached_fonts:
cached_fonts[font_file] = create_cairo_font_face_for_file(font_file)
font = cached_fonts[font_file]
except:
# no text for us.
pass
else:
ctx.set_font_face(font)
ctx.set_font_size(12)
line = href
text_width = ctx.text_extents(line)[2]
ctx.move_to(well_width_pt - text_width, -6)
ctx.show_text(line)
add_scale_bar(ctx, mmap, map_height_pt)
ctx.set_font_face(font)
ctx.set_font_size(18)
for (x1, y1, x2, y2, number) in page_numbers:
number_w, number_h = ctx.text_extents(number)[2:4]
offset_x, offset_y = (x1 + x2 - number_w) / 2, (y1 + y2 + number_h) / 2
draw_box(ctx, offset_x - 4, offset_y - number_h - 4, number_w + 8, number_h + 8)
ctx.set_source_rgb(1, 1, 1)
ctx.fill()
ctx.set_source_rgb(0, 0, 0)
ctx.move_to(offset_x, offset_y)
ctx.show_text(number)
ctx.show_page()
def generateOverlay(text,
font,
showFlumotion,
showCC,
showXiph,
width, height):
"""Generate an transparent image with text + logotypes rendered on top
of it suitable for mixing into a video stream
@param text: text to put in the top left corner
@type text: str
@param font: font description used to render the text
@type: str
@param showFlumotion: if we should show the flumotion logo
@type showFlumotion: bool
@param showCC: if we should show the Creative Common logo
@type showCC: bool
@param showXiph: if we should show the xiph logo
@type showXiph: bool
@param width: width of the image to generate
@type width: int
@param height: height of the image to generate
@type height: int
@returns: raw image and if images or if text overflowed
@rtype: 3 sized tuple of string and 2 booleans
"""
from cairo import ImageSurface
from cairo import Context
image = ImageSurface(cairo.FORMAT_ARGB32, width, height)
context = Context(image)
subImages = []
if showXiph:
subImages.append(os.path.join(configure.imagedir, '36x36', 'xiph.png'))
if showCC:
subImages.append(os.path.join(configure.imagedir, '36x36', 'cc.png'))
if showFlumotion:
subImages.append(os.path.join(configure.imagedir, '36x36',
'fluendo.png'))
imagesOverflowed = False
offsetX = BORDER
for subPath in subImages:
sub = ImageSurface.create_from_png(subPath)
subX = sub.get_width()
subY = sub.get_height()
offsetY = height - subY - BORDER
context.set_source_surface(sub, offsetX, offsetY)
context.paint()
if (offsetX + subX) > width:
imagesOverflowed = True
offsetX += subX + BORDER
textOverflowed = False
if text:
pcContext = pangocairo.CairoContext(context)
pangoLayout = pcContext.create_layout()
if font is not None:
font = pango.FontDescription(font)
if not font.get_family() or \
not font.get_family().lower() in [family.get_name().lower()
for family in pangoLayout.get_context().list_families()]:
font.set_family(FONT)
if font.get_size() == 0:
font.set_size(FONT_SIZE)
else:
font = pango.FontDescription('%s %s' % (FONT, FONT_PROPS))
pangoLayout.set_font_description(font)
context.move_to(TEXT_XOFFSET+2, TEXT_YOFFSET+2)
pangoLayout.set_markup('<span foreground="black" >%s</span>' % text)
pcContext.show_layout(pangoLayout)
context.move_to(TEXT_XOFFSET, TEXT_YOFFSET)
pangoLayout.set_markup('<span foreground="white" >%s</span>' % text)
pcContext.show_layout(pangoLayout)
textWidth, textHeight = pangoLayout.get_pixel_size()
if textWidth > width:
textOverflowed = True
if cairo.version < '1.2.6':
buf = image.get_data_as_rgba()
else:
buf = image.get_data()
return buf, imagesOverflowed, textOverflowed
