Exemplo n.º 1
0
def config_changed():
    utils.juju_log('INFO', 'Begin config-changed hook.')

    utils.juju_log('INFO', 'Monitor hosts are ' + repr(get_mon_hosts()))

    fsid = utils.config_get('fsid')
    if fsid == '':
        utils.juju_log('CRITICAL', 'No fsid supplied, cannot proceed.')
        sys.exit(1)

    monitor_secret = utils.config_get('monitor-secret')
    if monitor_secret == '':
        utils.juju_log('CRITICAL',
                       'No monitor-secret supplied, cannot proceed.')
        sys.exit(1)

    emit_cephconf()

    for dev in utils.config_get('osd-devices').split(' '):
        osdize(dev)

    # Support use of single node ceph
    if (not ceph.is_bootstrapped() and
        int(utils.config_get('monitor-count')) == 1):
        bootstrap_monitor_cluster()
        ceph.wait_for_bootstrap()

    if ceph.is_bootstrapped():
        ceph.rescan_osd_devices()

    utils.juju_log('INFO', 'End config-changed hook.')
Exemplo n.º 2
0
def check_for_upgrade():
    if not ceph.is_bootstrapped():
        log("Ceph is not bootstrapped, skipping upgrade checks.")
        return

    release_info = host.lsb_release()
    if not release_info['DISTRIB_CODENAME'] == 'trusty':
        log("Invalid upgrade path from {}.  Only trusty is currently "
            "supported".format(release_info['DISTRIB_CODENAME']))
        return

    c = hookenv.config()
    old_version = ceph.resolve_ceph_version(c.previous('source') or 'distro')
    log('old_version: {}'.format(old_version))
    # Strip all whitespace
    new_version = ceph.resolve_ceph_version(hookenv.config('source'))
    log('new_version: {}'.format(new_version))

    if (old_version in ceph.UPGRADE_PATHS
            and new_version == ceph.UPGRADE_PATHS[old_version]):
        log("{} to {} is a valid upgrade path.  Proceeding.".format(
            old_version, new_version))
        ceph.roll_monitor_cluster(new_version=new_version, upgrade_key='admin')
    else:
        # Log a helpful error message
        log("Invalid upgrade path from {} to {}.  "
            "Valid paths are: {}".format(old_version, new_version,
                                         ceph.pretty_print_upgrade_paths()))
Exemplo n.º 3
0
def assess_status():
    '''Assess status of current unit'''
    application_version_set(get_upstream_version(VERSION_PACKAGE))
    moncount = int(config('monitor-count'))
    units = get_peer_units()
    # not enough peers and mon_count > 1
    if len(units.keys()) < moncount:
        status_set(
            'blocked', 'Insufficient peer units to bootstrap'
            ' cluster (require {})'.format(moncount))
        return

    # mon_count > 1, peers, but no ceph-public-address
    ready = sum(1 for unit_ready in units.itervalues() if unit_ready)
    if ready < moncount:
        status_set('waiting', 'Peer units detected, waiting for addresses')
        return

    # active - bootstrapped + quorum status check
    if ceph.is_bootstrapped() and ceph.is_quorum():
        status_set('active', 'Unit is ready and clustered')
    else:
        # Unit should be running and clustered, but no quorum
        # TODO: should this be blocked or waiting?
        status_set('blocked', 'Unit not clustered (no quorum)')
Exemplo n.º 4
0
def start():
    # In case we're being redeployed to the same machines, try
    # to make sure everything is running as soon as possible.
    if ceph.systemd():
        service_restart('ceph-mon')
    else:
        service_restart('ceph-mon-all')
    if ceph.is_bootstrapped():
        ceph.start_osds(get_devices())
Exemplo n.º 5
0
def start():
    # In case we're being redeployed to the same machines, try
    # to make sure everything is running as soon as possible.
    if ceph.systemd():
        service_restart('ceph-mon')
    else:
        service_restart('ceph-mon-all')
    if ceph.is_bootstrapped():
        ceph.start_osds(get_devices())
Exemplo n.º 6
0
def config_changed():
    log('Begin config-changed hook.')

    log('Monitor hosts are ' + repr(get_mon_hosts()))

    # Pre-flight checks
    if not config('fsid'):
        log('No fsid supplied, cannot proceed.', level=ERROR)
        sys.exit(1)
    if not config('monitor-secret'):
        log('No monitor-secret supplied, cannot proceed.', level=ERROR)
        sys.exit(1)
    if config('osd-format') not in ceph.DISK_FORMATS:
        log('Invalid OSD disk format configuration specified', level=ERROR)
        sys.exit(1)

    emit_cephconf()

    e_mountpoint = config('ephemeral-unmount')
    if e_mountpoint and ceph.filesystem_mounted(e_mountpoint):
        umount(e_mountpoint)

    osd_journal = config('osd-journal')
    if (osd_journal and not os.path.exists(JOURNAL_ZAPPED)
            and os.path.exists(osd_journal)):
        ceph.zap_disk(osd_journal)
        with open(JOURNAL_ZAPPED, 'w') as zapped:
            zapped.write('DONE')

    # Support use of single node ceph
    if (not ceph.is_bootstrapped() and int(config('monitor-count')) == 1):
        ceph.bootstrap_monitor_cluster(config('monitor-secret'))
        ceph.wait_for_bootstrap()

    if ceph.is_bootstrapped():
        for dev in get_devices():
            ceph.osdize(dev, config('osd-format'), config('osd-journal'),
                        reformat_osd())
        ceph.start_osds(get_devices())

    log('End config-changed hook.')
def config_changed():
    if config('prefer-ipv6'):
        assert_charm_supports_ipv6()

    # Check if an upgrade was requested
    check_for_upgrade()

    log('Monitor hosts are ' + repr(get_mon_hosts()))

    sysctl_dict = config('sysctl')
    if sysctl_dict:
        create_sysctl(sysctl_dict, '/etc/sysctl.d/50-ceph-charm.conf')
    if relations_of_type('nrpe-external-master'):
        update_nrpe_config()

    if is_leader():
        if not leader_get('fsid') or not leader_get('monitor-secret'):
            if config('fsid'):
                fsid = config('fsid')
            else:
                fsid = "{}".format(uuid.uuid1())
            if config('monitor-secret'):
                mon_secret = config('monitor-secret')
            else:
                mon_secret = "{}".format(ceph.generate_monitor_secret())
            status_set('maintenance', 'Creating FSID and Monitor Secret')
            opts = {
                'fsid': fsid,
                'monitor-secret': mon_secret,
            }
            log("Settings for the cluster are: {}".format(opts))
            leader_set(opts)
    else:
        if leader_get('fsid') is None or leader_get('monitor-secret') is None:
            log('still waiting for leader to setup keys')
            status_set('waiting', 'Waiting for leader to setup keys')
            sys.exit(0)

    emit_cephconf()

    # Support use of single node ceph
    if not ceph.is_bootstrapped() and int(config('monitor-count')) == 1:
        status_set('maintenance', 'Bootstrapping single Ceph MON')
        ceph.bootstrap_monitor_cluster(config('monitor-secret'))
        ceph.wait_for_bootstrap()
    install_apparmor_profile()
Exemplo n.º 8
0
def config_changed():
    if config('prefer-ipv6'):
        assert_charm_supports_ipv6()

    log('Monitor hosts are ' + repr(get_mon_hosts()))

    # Pre-flight checks
    if not config('fsid'):
        log('No fsid supplied, cannot proceed.', level=ERROR)
        sys.exit(1)
    if not config('monitor-secret'):
        log('No monitor-secret supplied, cannot proceed.', level=ERROR)
        sys.exit(1)
    if config('osd-format') not in ceph.DISK_FORMATS:
        log('Invalid OSD disk format configuration specified', level=ERROR)
        sys.exit(1)

    sysctl_dict = config('sysctl')
    if sysctl_dict:
        create_sysctl(sysctl_dict, '/etc/sysctl.d/50-ceph-charm.conf')

    emit_cephconf()

    e_mountpoint = config('ephemeral-unmount')
    if e_mountpoint and ceph.filesystem_mounted(e_mountpoint):
        umount(e_mountpoint)

    osd_journal = get_osd_journal()
    if (osd_journal and not os.path.exists(JOURNAL_ZAPPED)
            and os.path.exists(osd_journal)):
        ceph.zap_disk(osd_journal)
        with open(JOURNAL_ZAPPED, 'w') as zapped:
            zapped.write('DONE')

    # Support use of single node ceph
    if (not ceph.is_bootstrapped() and int(config('monitor-count')) == 1):
        status_set('maintenance', 'Bootstrapping single Ceph MON')
        ceph.bootstrap_monitor_cluster(config('monitor-secret'))
        ceph.wait_for_bootstrap()

    storage_changed()

    if relations_of_type('nrpe-external-master'):
        update_nrpe_config()
Exemplo n.º 9
0
def config_changed():
    if config('prefer-ipv6'):
        assert_charm_supports_ipv6()

    log('Monitor hosts are ' + repr(get_mon_hosts()))

    # Pre-flight checks
    if not config('fsid'):
        log('No fsid supplied, cannot proceed.', level=ERROR)
        sys.exit(1)
    if not config('monitor-secret'):
        log('No monitor-secret supplied, cannot proceed.', level=ERROR)
        sys.exit(1)
    if config('osd-format') not in ceph.DISK_FORMATS:
        log('Invalid OSD disk format configuration specified', level=ERROR)
        sys.exit(1)

    sysctl_dict = config('sysctl')
    if sysctl_dict:
        create_sysctl(sysctl_dict, '/etc/sysctl.d/50-ceph-charm.conf')

    emit_cephconf()

    e_mountpoint = config('ephemeral-unmount')
    if e_mountpoint and ceph.filesystem_mounted(e_mountpoint):
        umount(e_mountpoint)

    osd_journal = get_osd_journal()
    if (osd_journal and not os.path.exists(JOURNAL_ZAPPED) and
            os.path.exists(osd_journal)):
        ceph.zap_disk(osd_journal)
        with open(JOURNAL_ZAPPED, 'w') as zapped:
            zapped.write('DONE')

    # Support use of single node ceph
    if (not ceph.is_bootstrapped() and int(config('monitor-count')) == 1):
        status_set('maintenance', 'Bootstrapping single Ceph MON')
        ceph.bootstrap_monitor_cluster(config('monitor-secret'))
        ceph.wait_for_bootstrap()

    storage_changed()

    if relations_of_type('nrpe-external-master'):
        update_nrpe_config()
Exemplo n.º 10
0
def check_for_upgrade():
    if not ceph.is_bootstrapped():
        log("Ceph is not bootstrapped, skipping upgrade checks.")
        return

    release_info = host.lsb_release()
    if not release_info['DISTRIB_CODENAME'] == 'trusty':
        log("Invalid upgrade path from {}.  Only trusty is currently "
            "supported".format(release_info['DISTRIB_CODENAME']))
        return

    c = hookenv.config()
    old_version = ceph.resolve_ceph_version(c.previous('source') or 'distro')
    log('old_version: {}'.format(old_version))
    new_version = ceph.resolve_ceph_version(
        hookenv.config('source') or 'distro')
    log('new_version: {}'.format(new_version))

    # May be in a previous upgrade that was failed if the directories
    # still need an ownership update. Check this condition.
    resuming_upgrade = ceph.dirs_need_ownership_update('osd')

    if old_version == new_version and not resuming_upgrade:
        log("No new ceph version detected, skipping upgrade.", DEBUG)
        return

    if (ceph.UPGRADE_PATHS.get(old_version) == new_version) or\
       resuming_upgrade:
        if old_version == new_version:
            log('Attempting to resume possibly failed upgrade.', INFO)
        else:
            log("{} to {} is a valid upgrade path. Proceeding.".format(
                old_version, new_version))

        emit_cephconf(upgrading=True)
        ceph.roll_osd_cluster(new_version=new_version,
                              upgrade_key='osd-upgrade')
        emit_cephconf(upgrading=False)
    else:
        # Log a helpful error message
        log("Invalid upgrade path from {} to {}.  "
            "Valid paths are: {}".format(old_version, new_version,
                                         ceph.pretty_print_upgrade_paths()))
Exemplo n.º 11
0
def prepare_disks_and_activate():
    osd_journal = get_journal_devices()
    check_overlap(osd_journal, set(get_devices()))
    log("got journal devs: {}".format(osd_journal), level=DEBUG)
    already_zapped = read_zapped_journals()
    non_zapped = osd_journal - already_zapped
    for journ in non_zapped:
        ceph.maybe_zap_journal(journ)
    write_zapped_journals(osd_journal)

    if ceph.is_bootstrapped():
        log('ceph bootstrapped, rescanning disks')
        emit_cephconf()
        for dev in get_devices():
            ceph.osdize(dev, config('osd-format'),
                        osd_journal, config('osd-reformat'),
                        config('ignore-device-errors'),
                        config('osd-encrypt'))
        ceph.start_osds(get_devices())
Exemplo n.º 12
0
def prepare_disks_and_activate():
    osd_journal = get_journal_devices()
    check_overlap(osd_journal, set(get_devices()))
    log("got journal devs: {}".format(osd_journal), level=DEBUG)
    already_zapped = read_zapped_journals()
    non_zapped = osd_journal - already_zapped
    for journ in non_zapped:
        ceph.maybe_zap_journal(journ)
    write_zapped_journals(osd_journal)

    if ceph.is_bootstrapped():
        log('ceph bootstrapped, rescanning disks')
        emit_cephconf()
        for dev in get_devices():
            ceph.osdize(dev, config('osd-format'), osd_journal,
                        config('osd-reformat'), config('ignore-device-errors'),
                        config('osd-encrypt'))
            # Make it fast!
            if config('autotune'):
                ceph.tune_dev(dev)
        ceph.start_osds(get_devices())
Exemplo n.º 13
0
def assess_status():
    '''Assess status of current unit'''
    moncount = int(config('monitor-count'))
    units = get_peer_units()
    # not enough peers and mon_count > 1
    if len(units.keys()) < moncount:
        status_set('blocked', 'Insufficient peer units to bootstrap'
                              ' cluster (require {})'.format(moncount))
        return

    # mon_count > 1, peers, but no ceph-public-address
    ready = sum(1 for unit_ready in units.itervalues() if unit_ready)
    if ready < moncount:
        status_set('waiting', 'Peer units detected, waiting for addresses')
        return

    # active - bootstrapped + quorum status check
    if ceph.is_bootstrapped() and ceph.is_quorum():
        status_set('active', 'Unit is ready and clustered')
    else:
        # Unit should be running and clustered, but no quorum
        # TODO: should this be blocked or waiting?
        status_set('blocked', 'Unit not clustered (no quorum)')
Exemplo n.º 14
0
 def test_is_bootstrapped(self):
     self.os.path.exists.return_value = True
     self.assertEqual(ceph.is_bootstrapped(), True)
     self.os.path.exists.return_value = False
     self.assertEqual(ceph.is_bootstrapped(), False)
Exemplo n.º 15
0
def storage_changed():
    if ceph.is_bootstrapped():
        for dev in get_devices():
            ceph.osdize(dev, config('osd-format'), get_osd_journal(),
                        reformat_osd(), config('ignore-device-errors'))
        ceph.start_osds(get_devices())
Exemplo n.º 16
0
def storage_changed():
    if ceph.is_bootstrapped():
        for dev in get_devices():
            ceph.osdize(dev, config('osd-format'), get_osd_journal(),
                        reformat_osd(), config('ignore-device-errors'))
        ceph.start_osds(get_devices())