def __init__(self):
        super(CrazyloadThread, self).__init__()

        # Make sure that the signals are handled by this thread event loop
        self.moveToThread(self)
        self._bl = Bootloader()
        self._bl.progress_cb = self.statusChanged.emit

        self.writeConfigSignal.connect(self.writeConfigAction)
        self.initiateColdBootSignal.connect(self.initiateColdBoot)
        self.resetCopterSignal.connect(self.resetCopter)
Exemplo n.º 2
0
    def __init__(self):
        super(CrazyloadThread, self).__init__()

        self._terminate_flashing = False

        self._bl = Bootloader()
        self._bl.progress_cb = self.statusChanged.emit
        self._bl.terminate_flashing_cb = lambda: self._terminate_flashing

        # Make sure that the signals are handled by this thread event loop
        self.moveToThread(self)

        self.program.connect(self.programAction)
        self.initiateColdBootSignal.connect(self.initiateColdBoot)
        self.resetCopterSignal.connect(self.resetCopter)
Exemplo n.º 3
0
    def __init__(self, crazyflie: cflib.crazyflie.Crazyflie):
        super(CrazyloadThread, self).__init__()

        self._terminate_flashing = False

        self._bl = Bootloader()

        self._cf = crazyflie

        self._boot_mode = self.COLD_BOOT

        # Make sure that the signals are handled by this thread event loop
        self.moveToThread(self)

        self.program.connect(self.programAction)
        self.initiateColdBootSignal.connect(self.initiateColdBoot)
        self.resetCopterSignal.connect(self.resetCopter)
Exemplo n.º 4
0
    def __init__(self):
        super(CrazyloadThread, self).__init__()

        # Make sure that the signals are handled by this thread event loop
        self.moveToThread(self)
        self._bl = Bootloader()
        self._bl.progress_cb = self.statusChanged.emit

        self.writeConfigSignal.connect(self.writeConfigAction)
        self.initiateColdBootSignal.connect(self.initiateColdBoot)
        self.resetCopterSignal.connect(self.resetCopter)
    def test_boot_to_bootloader(self):
        self.assertTrue(self.is_stm_connected())
        bl = Bootloader(self.radioUri)
        started = bl.start_bootloader(warm_boot=True)
        self.assertTrue(started)

        # t = bl.get_target(TargetTypes.NRF51)
        # print(t)

        bl.reset_to_firmware()
        bl.close()
        time.sleep(1)
        self.assertTrue(self.is_stm_connected())
        self.assertTrue(BootVersion.is_cf2(bl.protocol_version))
Exemplo n.º 6
0
        filename = sys.argv[1]
        targets = []  # Dict[Target]
        for t in sys.argv[2:]:
            if t.startswith("deck-"):
                [deck, target, type] = t.split("-")
                targets.append(Target("deck", target, type))
            else:
                [target, type] = t.split("-")
                targets.append(Target("cf2", target, type))
    else:
        print("Action", sys.argv[0], "unknown!")
        sys.exit(-1)

    try:
        # Initialise the bootloader lib
        bl = Bootloader(clink)

        warm_boot = (boot == "reset")
        if warm_boot:
            print("Reset to bootloader mode ...")
            sys.stdout.flush()
        else:  # The connection is done by a cold boot ...
            print("Restart the Crazyflie you want to bootload in the next"),
            print(" 10 seconds ..."),

            sys.stdout.flush()

        ######################################
        # Doing something (hopefully) useful
        ######################################
Exemplo n.º 7
0
class CrazyloadThread(QThread):
    # Input signals declaration (not sure it should be used like that...)
    program = pyqtSignal(str, bool)
    verify = pyqtSignal()
    initiateColdBootSignal = pyqtSignal(str)
    resetCopterSignal = pyqtSignal()
    writeConfigSignal = pyqtSignal(int, int, float, float)
    # Output signals declaration
    programmed = pyqtSignal(bool)
    verified = pyqtSignal()
    statusChanged = pyqtSignal(str, int)
    connectedSignal = pyqtSignal()
    connectingSignal = pyqtSignal()
    failed_signal = pyqtSignal(str)
    disconnectedSignal = pyqtSignal()
    updateConfigSignal = pyqtSignal(int, int, float, float)
    updateCpuIdSignal = pyqtSignal(str)

    radioSpeedPos = 2

    def __init__(self):
        super(CrazyloadThread, self).__init__()

        self._bl = Bootloader()
        self._bl.progress_cb = self.statusChanged.emit

        # Make sure that the signals are handled by this thread event loop
        self.moveToThread(self)

        self.program.connect(self.programAction)
        self.initiateColdBootSignal.connect(self.initiateColdBoot)
        self.resetCopterSignal.connect(self.resetCopter)

    def __del__(self):
        self.quit()
        self.wait()

    def initiateColdBoot(self, linkURI):
        self.connectingSignal.emit()

        try:
            success = self._bl.start_bootloader(warm_boot=False)
            if not success:
                self.failed_signal.emit("Could not connect to bootloader")
            else:
                self.connectedSignal.emit()
        except Exception as e:
            self.failed_signal.emit("{}".format(e))

    def programAction(self, filename, verify):
        targets = {}
        if str(filename).endswith("bin"):
            targets["stm32"] = ("fw", )
        try:
            self._bl.flash(str(filename), targets)
            self.programmed.emit(True)
        except Exception:
            self.programmed.emit(False)

    def resetCopter(self):
        try:
            self._bl.reset_to_firmware()
        except Exception:
            pass
        self._bl.close()
        self.disconnectedSignal.emit()
Exemplo n.º 8
0
def main():
    # Initialise the CRTP link driver
    link = None
    try:
        cflib.crtp.init_drivers()
        link = cflib.crtp.get_link_driver("radio://")
    except Exception as e:
        print("Error: {}".format(str(e)))
        if link:
            link.close()
        sys.exit(-1)

    # Set the default parameters
    clink = None
    action = "info"
    boot = "cold"

    if len(sys.argv) < 2:
        print()
        print("==============================")
        print(" CrazyLoader Flash Utility")
        print("==============================")
        print()
        print(" Usage:", sys.argv[0], "[CRTP options] <action> [parameters]")
        print()
        print("The CRTP options are described above")
        print()
        print("Crazyload option:")
        print("   info                    : Print the info of the bootloader "
              "and quit.")
        print("                             Will let the target in bootloader "
              "mode")
        print("   reset                   : Reset the device in firmware mode")
        print("   flash <file> [targets]  : flash the <img> binary file from "
              "the first")
        print("                             possible  page in flash and reset "
              "to firmware")
        print("                             mode.")
        if link:
            link.close()
        sys.exit(0)

    # Analyse the command line parameters
    sys.argv = sys.argv[1:]
    argv = []

    i = 0
    while i < len(sys.argv):
        if sys.argv[i] == "--cold-boot" or sys.argv[i] == "-c":
            boot = "cold"
        elif sys.argv[i] == "--warm-boot" or sys.argv[i] == "-w":
            boot = "reset"
            i += 1
            clink = sys.argv[i]
        else:
            argv += [sys.argv[i]]
        i += 1
    sys.argv = argv

    # Analyse the command
    if len(sys.argv) < 1:
        action = "info"
    elif sys.argv[0] == "info":
        action = "info"
    elif sys.argv[0] == "reset":
        action = "reset"
    elif sys.argv[0] == "flash":
        # print len(sys.argv)
        if len(sys.argv) < 2:
            print("The flash action require a file name.")
            link.close()
            sys.exit(-1)
        action = "flash"
        filename = sys.argv[1]
        targetnames = {}
        for t in sys.argv[2:]:
            [target, type] = t.split("-")
            if target in targetnames:
                targetnames[target] += (type, )
            else:
                targetnames[target] = (type, )
    else:
        print("Action", sys.argv[0], "unknown!")
        link.close()
        sys.exit(-1)

    # Currently there's two different targets available
    targets = ()

    try:
        # Initialise the bootloader lib
        bl = Bootloader(clink)

        #########################################
        # Get the connection with the bootloader
        #########################################
        # The connection is done by reseting to the bootloader (default)
        if boot == "reset":
            print("Reset to bootloader mode ..."),
            sys.stdout.flush()
            if bl.start_bootloader(warm_boot=True):
                print(" done!")
            else:
                print("Failed to warmboot")
                bl.close()
                sys.exit(-1)
        else:  # The connection is done by a cold boot ...
            print("Restart the Crazyflie you want to bootload in the next"),
            print(" 10 seconds ..."),

            sys.stdout.flush()
            if bl.start_bootloader(warm_boot=False):
                print(" done!")
            else:
                print("Cannot connect the bootloader!")
                bl.close()
                sys.exit(-1)

        print("Connected to bootloader on {} (version=0x{:X})".format(
            BootVersion.to_ver_string(bl.protocol_version),
            bl.protocol_version))

        if bl.protocol_version == BootVersion.CF2_PROTO_VER:
            targets += (bl.get_target(TargetTypes.NRF51), )
        targets += (bl.get_target(TargetTypes.STM32), )

        ######################################
        # Doing something (hopefully) useful
        ######################################

        # Print information about the targets
        for target in targets:
            print(target)
        if action == "info":
            None  # Already done ...
        elif action == "reset":
            print
            print("Reset in firmware mode ...")
            bl.reset_to_firmware()
        elif action == "flash":
            bl.flash(filename, targetnames)
            print("Reset in firmware mode ...")
            bl.reset_to_firmware()
        else:
            None
    except Exception as e:
        import traceback

        traceback.print_exc(file=sys.stdout)
        print(e)

    finally:
        #########################
        # Closing the connection
        #########################
        if bl:
            bl.close()
Exemplo n.º 9
0
class CrazyloadThread(QThread):
    # Input signals declaration (not sure it should be used like that...)
    initiateColdBootSignal = pyqtSignal(str)
    resetCopterSignal = pyqtSignal()
    writeConfigSignal = pyqtSignal(int, int, float, float)
    # Output signals declaration
    statusChanged = pyqtSignal(str, int)
    connectedSignal = pyqtSignal()
    connectingSignal = pyqtSignal()
    failed_signal = pyqtSignal(str)
    disconnectedSignal = pyqtSignal()
    updateConfigSignal = pyqtSignal(int, int, float, float)

    def __init__(self):
        super(CrazyloadThread, self).__init__()

        # Make sure that the signals are handled by this thread event loop
        self.moveToThread(self)
        self._bl = Bootloader()
        self._bl.progress_cb = self.statusChanged.emit

        self.writeConfigSignal.connect(self.writeConfigAction)
        self.initiateColdBootSignal.connect(self.initiateColdBoot)
        self.resetCopterSignal.connect(self.resetCopter)

    def __del__(self):
        self.quit()
        self.wait()

    def initiateColdBoot(self, linkURI):
        self.connectingSignal.emit()

        try:
            success = self._bl.start_bootloader(warm_boot=False)
            if not success:
                self.failed_signal.emit("Could not connect to bootloader")
            else:
                self.connectedSignal.emit()
                self.readConfigAction()
        except Exception as e:
            self.failed_signal.emit("{}".format(e))

    def checksum256(self, st):
        return reduce(lambda x, y: x + y, map(ord, st)) % 256

    def writeConfigAction(self, channel, speed, rollTrim, pitchTrim):
        data = (0x00, channel, speed, pitchTrim, rollTrim)
        image = struct.pack("<BBBff", *data)
        # Adding some magic:
        image = "0xBC" + image
        image += struct.pack("B", 256 - self.checksum256(image))

        self._bl.write_cf1_config(image)

    def readConfigAction(self):
        self.statusChanged.emit("Reading config block...", 0)
        data = self._bl.read_cf1_config()
        if (data is not None):
            if data[0:4] == "0xBC":
                # Skip 0xBC and version at the beginning
                [channel,
                 speed,
                 pitchTrim,
                 rollTrim] = struct.unpack("<BBff", data[5:15])
                self.statusChanged.emit("Reading config block...done!", 100)
            else:
                channel = Config().get("default_cf_channel")
                speed = Config().get("default_cf_speed")
                pitchTrim = Config().get("default_cf_trim")
                rollTrim = Config().get("default_cf_trim")
                self.statusChanged.emit("Could not find config block, showing defaults", 100)
            self.updateConfigSignal.emit(channel, speed, rollTrim, pitchTrim)
        else:
            self.statusChanged.emit("Reading config block failed!", 0)

    def resetCopter(self):
        try:
            self._bl.reset_to_firmware()
        except Exception:
            pass
        self._bl.close()
        self.disconnectedSignal.emit()
class CrazyloadThread(QThread):
    # Input signals declaration (not sure it should be used like that...)
    program = pyqtSignal(str, bool, str)
    verify = pyqtSignal()
    initiateColdBootSignal = pyqtSignal(str)
    resetCopterSignal = pyqtSignal()
    writeConfigSignal = pyqtSignal(int, int, float, float)
    # Output signals declaration
    programmed = pyqtSignal(bool)
    verified = pyqtSignal()
    statusChanged = pyqtSignal(str, int)
    connectedSignal = pyqtSignal()
    connectingSignal = pyqtSignal()
    failed_signal = pyqtSignal(str)
    disconnectedSignal = pyqtSignal()
    updateConfigSignal = pyqtSignal(int, int, float, float)
    updateCpuIdSignal = pyqtSignal(str)

    radioSpeedPos = 2

    def __init__(self):
        super(CrazyloadThread, self).__init__()

        self._bl = Bootloader()
        self._bl.progress_cb = self.statusChanged.emit

        # Make sure that the signals are handled by this thread event loop
        self.moveToThread(self)

        self.program.connect(self.programAction)
        self.initiateColdBootSignal.connect(self.initiateColdBoot)
        self.resetCopterSignal.connect(self.resetCopter)

    def __del__(self):
        self.quit()
        self.wait()

    def initiateColdBoot(self, linkURI):
        self.connectingSignal.emit()

        try:
            success = self._bl.start_bootloader(warm_boot=False)
            if not success:
                self.failed_signal.emit("Could not connect to bootloader")
            else:
                self.connectedSignal.emit()
        except Exception as e:
            self.failed_signal.emit("{}".format(e))

    def programAction(self, filename, verify, mcu_to_flash):

        targets = {}
        if mcu_to_flash:
            targets[mcu_to_flash] = ("fw", )
        try:
            self._bl.flash(str(filename), targets)
            self.programmed.emit(True)
        except Exception:
            self.programmed.emit(False)

    def resetCopter(self):
        try:
            self._bl.reset_to_firmware()
        except Exception:
            pass
        self._bl.close()
        self.disconnectedSignal.emit()
Exemplo n.º 11
0
def main():
    # Initialise the CRTP link driver
    link = None
    try:
        cflib.crtp.init_drivers()
        link = cflib.crtp.get_link_driver("radio://")
    except Exception as e:
        print("Error: {}".format(str(e)))
        if link:
            link.close()
        sys.exit(-1)

    # Set the default parameters
    clink = None
    action = "info"
    boot = "cold"

    if len(sys.argv) < 2:
        print()
        print("==============================")
        print(" CrazyLoader Flash Utility")
        print("==============================")
        print()
        print(" Usage:", sys.argv[0], "[CRTP options] <action> [parameters]")
        print()
        print("The CRTP options are described above")
        print()
        print("Crazyload option:")
        print("   info                    : Print the info of the bootloader "
              "and quit.")
        print("                             Will let the target in bootloader "
              "mode")
        print("   reset                   : Reset the device in firmware mode")
        print("   flash <file> [targets]  : flash the <img> binary file from "
              "the first")
        print("                             possible  page in flash and reset "
              "to firmware")
        print("                             mode.")
        if link:
            link.close()
        sys.exit(0)

    # Analyse the command line parameters
    sys.argv = sys.argv[1:]
    argv = []

    i = 0
    while i < len(sys.argv):
        if sys.argv[i] == "--cold-boot" or sys.argv[i] == "-c":
            boot = "cold"
        elif sys.argv[i] == "--warm-boot" or sys.argv[i] == "-w":
            boot = "reset"
            i += 1
            clink = sys.argv[i]
        else:
            argv += [sys.argv[i]]
        i += 1
    sys.argv = argv

    # Analyse the command
    if len(sys.argv) < 1:
        action = "info"
    elif sys.argv[0] == "info":
        action = "info"
    elif sys.argv[0] == "reset":
        action = "reset"
    elif sys.argv[0] == "flash":
        # print len(sys.argv)
        if len(sys.argv) < 2:
            print("The flash action require a file name.")
            link.close()
            sys.exit(-1)
        action = "flash"
        filename = sys.argv[1]
        targetnames = {}
        for t in sys.argv[2:]:
            [target, type] = t.split("-")
            if target in targetnames:
                targetnames[target] += (type,)
            else:
                targetnames[target] = (type,)
    else:
        print("Action", sys.argv[0], "unknown!")
        link.close()
        sys.exit(-1)

    # Currently there's two different targets available
    targets = ()

    try:
        # Initialise the bootloader lib
        bl = Bootloader(clink)

        #########################################
        # Get the connection with the bootloader
        #########################################
        # The connection is done by reseting to the bootloader (default)
        if boot == "reset":
            print("Reset to bootloader mode ..."),
            sys.stdout.flush()
            if bl.start_bootloader(warm_boot=True):
                print(" done!")
            else:
                print("Failed to warmboot")
                bl.close()
                sys.exit(-1)
        else:  # The connection is done by a cold boot ...
            print("Restart the Crazyflie you want to bootload in the next"),
            print(" 10 seconds ..."),

            sys.stdout.flush()
            if bl.start_bootloader(warm_boot=False):
                print(" done!")
            else:
                print("Cannot connect the bootloader!")
                bl.close()
                sys.exit(-1)

        print("Connected to bootloader on {} (version=0x{:X})".format(
            BootVersion.to_ver_string(bl.protocol_version),
            bl.protocol_version))

        if bl.protocol_version == BootVersion.CF2_PROTO_VER:
            targets += (bl.get_target(TargetTypes.NRF51),)
        targets += (bl.get_target(TargetTypes.STM32),)

        ######################################
        # Doing something (hopefully) useful
        ######################################

        # Print information about the targets
        for target in targets:
            print(target)
        if action == "info":
            None  # Already done ...
        elif action == "reset":
            print
            print("Reset in firmware mode ...")
            bl.reset_to_firmware()
        elif action == "flash":
            bl.flash(filename, targetnames)
            print("Reset in firmware mode ...")
            bl.reset_to_firmware()
        else:
            None
    except Exception as e:
        import traceback

        traceback.print_exc(file=sys.stdout)
        print(e)

    finally:
        #########################
        # Closing the connection
        #########################
        if bl:
            bl.close()
class CrazyloadThread(QThread):
    # Input signals declaration (not sure it should be used like that...)
    initiateColdBootSignal = pyqtSignal(str)
    resetCopterSignal = pyqtSignal()
    writeConfigSignal = pyqtSignal(int, int, float, float)
    # Output signals declaration
    statusChanged = pyqtSignal(str, int)
    connectedSignal = pyqtSignal()
    connectingSignal = pyqtSignal()
    failed_signal = pyqtSignal(str)
    disconnectedSignal = pyqtSignal()
    updateConfigSignal = pyqtSignal(int, int, float, float)

    def __init__(self):
        super(CrazyloadThread, self).__init__()

        # Make sure that the signals are handled by this thread event loop
        self.moveToThread(self)
        self._bl = Bootloader()
        self._bl.progress_cb = self.statusChanged.emit

        self.writeConfigSignal.connect(self.writeConfigAction)
        self.initiateColdBootSignal.connect(self.initiateColdBoot)
        self.resetCopterSignal.connect(self.resetCopter)

    def __del__(self):
        self.quit()
        self.wait()

    def initiateColdBoot(self, linkURI):
        self.connectingSignal.emit()

        try:
            success = self._bl.start_bootloader(warm_boot=False)
            if not success:
                self.failed_signal.emit("Could not connect to bootloader")
            else:
                self.connectedSignal.emit()
                self.readConfigAction()
        except Exception as e:
            self.failed_signal.emit("{}".format(e))

    def checksum256(self, st):
        return reduce(lambda x, y: x + y, list(map(ord, st))) % 256

    def writeConfigAction(self, channel, speed, rollTrim, pitchTrim):
        data = (0x00, channel, speed, pitchTrim, rollTrim)
        image = struct.pack("<BBBff", *data)
        # Adding some magic:
        image = "0xBC" + image
        image += struct.pack("B", 256 - self.checksum256(image))

        self._bl.write_cf1_config(image)

    def readConfigAction(self):
        self.statusChanged.emit("Reading config block...", 0)
        data = self._bl.read_cf1_config()
        if (data is not None):
            if data[0:4] == "0xBC":
                # Skip 0xBC and version at the beginning
                [channel, speed, pitchTrim,
                 rollTrim] = struct.unpack("<BBff", data[5:15])
                self.statusChanged.emit("Reading config block...done!", 100)
            else:
                channel = Config().get("default_cf_channel")
                speed = Config().get("default_cf_speed")
                pitchTrim = Config().get("default_cf_trim")
                rollTrim = Config().get("default_cf_trim")
                self.statusChanged.emit(
                    "Could not find config block, showing defaults", 100)
            self.updateConfigSignal.emit(channel, speed, rollTrim, pitchTrim)
        else:
            self.statusChanged.emit("Reading config block failed!", 0)

    def resetCopter(self):
        try:
            self._bl.reset_to_firmware()
        except Exception:
            pass
        self._bl.close()
        self.disconnectedSignal.emit()
Exemplo n.º 13
0
def main():
    # Initialise the CRTP link driver
    link = None
    try:
        cflib.crtp.init_drivers()
        link = cflib.crtp.get_link_driver("radio://")
    except Exception as e:
        print("Error: {}".format(str(e)))
        if link:
            link.close()
        sys.exit(-1)

    # Set the default parameters
    clink = None
    action = "info"
    boot = "cold"
    filename = None  # type: Optional[str]
    targets = None  # type: Optional[List[Target]]
    bl = None  # type: Optional[Bootloader]

    if len(sys.argv) < 2:
        print()
        print("==============================")
        print(" CrazyLoader Flash Utility")
        print("==============================")
        print()
        print(" Usage:", sys.argv[0], "[CRTP options] <action> [parameters]")
        print()
        print("The CRTP options are described above")
        print()
        print("Crazyload option:")
        print("   info                    : Print the info of the bootloader "
              "and quit.")
        print("                             Will let the target in bootloader "
              "mode")
        print("   reset                   : Reset the device in firmware mode")
        print("   flash <file> [targets]  : flash the <img> binary file from "
              "the first")
        print("                             possible  page in flash and reset "
              "to firmware")
        print("                             mode.")
        if link:
            link.close()
        sys.exit(0)

    # Analyse the command line parameters
    sys.argv = sys.argv[1:]
    argv = []

    i = 0
    while i < len(sys.argv):
        if sys.argv[i] == "--cold-boot" or sys.argv[i] == "-c":
            boot = "cold"
        elif sys.argv[i] == "--warm-boot" or sys.argv[i] == "-w":
            boot = "reset"
            i += 1
            clink = sys.argv[i]
        else:
            argv += [sys.argv[i]]
        i += 1
    sys.argv = argv

    # Analyse the command
    if len(sys.argv) < 1:
        action = "info"
    elif sys.argv[0] == "info":
        action = "info"
    elif sys.argv[0] == "reset":
        action = "reset"
    elif sys.argv[0] == "flash":
        if len(sys.argv) < 2:
            print("The flash action require a file name.")
            link.close()
            sys.exit(-1)
        action = "flash"
        filename = sys.argv[1]
        targets = []  # Dict[Target]
        for t in sys.argv[2:]:
            if t.startswith("deck-"):
                [deck, target, type] = t.split("-")
                targets.append(Target("deck", target, type))
            else:
                [target, type] = t.split("-")
                targets.append(Target("cf2", target, type))
    else:
        print("Action", sys.argv[0], "unknown!")
        link.close()
        sys.exit(-1)

    try:
        # Initialise the bootloader lib
        bl = Bootloader(clink)

        warm_boot = (boot == "reset")
        if warm_boot:
            print("Reset to bootloader mode ...")
            sys.stdout.flush()
        else:  # The connection is done by a cold boot ...
            print("Restart the Crazyflie you want to bootload in the next"),
            print(" 10 seconds ..."),

            sys.stdout.flush()

        ######################################
        # Doing something (hopefully) useful
        ######################################

        if action == "info":

            def print_info(version: int, connected_targets: [Target]):
                print("Connected to bootloader on {} (version=0x{:X})".format(
                    BootVersion.to_ver_string(version), version))
                for target in connected_targets:
                    print(target)

            # flash_full called with no filename will not flash, just call
            # our info callback
            bl.flash_full(None, warm_boot, None, print_info)
        elif action == "flash" and filename and targets:
            try:
                bl.flash_full(filename, warm_boot, targets)
            except Exception as e:
                print("Failed to flash: {}".format(e))
        elif action == "reset":
            bl.reset_to_firmware()
        else:
            None
    except Exception as e:
        import traceback

        traceback.print_exc(file=sys.stdout)
        print(e)

    finally:
        #########################
        # Closing the connection
        #########################
        if bl:
            bl.close()
Exemplo n.º 14
0
class CrazyloadThread(QThread):
    # Input signals declaration (not sure it should be used like that...)
    program = pyqtSignal(str, str)
    initiateColdBootSignal = pyqtSignal(str)
    resetCopterSignal = pyqtSignal()
    writeConfigSignal = pyqtSignal(int, int, float, float)
    # Output signals declaration
    programmed = pyqtSignal(bool)
    verified = pyqtSignal()
    statusChanged = pyqtSignal(str, int)
    connectedSignal = pyqtSignal()
    connectingSignal = pyqtSignal()
    failed_signal = pyqtSignal(str)
    disconnectedSignal = pyqtSignal()
    updateConfigSignal = pyqtSignal(int, int, float, float)
    updateCpuIdSignal = pyqtSignal(str)

    radioSpeedPos = 2

    WARM_BOOT = 0
    COLD_BOOT = 1

    def __init__(self, crazyflie: cflib.crazyflie.Crazyflie):
        super(CrazyloadThread, self).__init__()

        self._terminate_flashing = False

        self._bl = Bootloader()
        self._bl.progress_cb = self.statusChanged.emit
        self._bl.terminate_flashing_cb = lambda: self._terminate_flashing

        self._cf = crazyflie

        self._boot_mode = self.COLD_BOOT

        # Make sure that the signals are handled by this thread event loop
        self.moveToThread(self)

        self.program.connect(self.programAction)
        self.initiateColdBootSignal.connect(self.initiateColdBoot)
        self.resetCopterSignal.connect(self.resetCopter)

    def __del__(self):
        self.quit()
        self.wait()

    def set_boot_mode(self, mode):
        self._boot_mode = mode

    def initiateColdBoot(self, linkURI):
        self.connectingSignal.emit()

        try:
            success = self._bl.start_bootloader(warm_boot=False)
            if not success:
                self.failed_signal.emit("Could not connect to bootloader")
            else:
                self.connectedSignal.emit()
        except Exception as e:
            self.failed_signal.emit("{}".format(e))

    def rebootToBootloader(self):
        self._bl.clink = self._cf.link_uri
        self._cf.close_link()

        try:
            success = self._bl.start_bootloader(warm_boot=True)
            if not success:
                self.failed_signal.emit("Could not connect to bootloader")
            else:
                self.connectedSignal.emit()
        except Exception as e:
            self.failed_signal.emit("{}".format(e))

    def programAction(self, filename, mcu_to_flash):

        if self._boot_mode == self.WARM_BOOT:
            self.rebootToBootloader()

        targets = {}
        if mcu_to_flash:
            targets[mcu_to_flash] = ("fw", )
        try:
            self._terminate_flashing = False
            self._bl.flash(str(filename), targets)
            self.programmed.emit(True)
        except Exception:
            self.programmed.emit(False)

    def terminate_flashing(self):
        self._terminate_flashing = True

    def resetCopter(self):
        try:
            self._bl.reset_to_firmware()
        except Exception:
            pass
        self._bl.close()
        self.disconnectedSignal.emit()