def test_aqt_sampler_error_handling():
for e_return in [
EngineError(),
EngineErrorSecond(),
EngineNoStatus(),
EngineNoStatus2(),
EngineNoid()
]:
with mock.patch('cirq.aqt.aqt_sampler.put',
return_value=e_return,
side_effect=e_return.update) as _mock_method:
theta = sympy.Symbol('theta')
num_points = 1
max_angle = np.pi
repetitions = 10
sampler = AQTSampler(remote_host="http://localhost:5000",
access_token='testkey')
device, qubits = get_aqt_device(1)
circuit = Circuit(X(qubits[0])**theta, device=device)
sweep = study.Linspace(key='theta',
start=0.1,
stop=max_angle / np.pi,
length=num_points)
with pytest.raises(RuntimeError):
_results = sampler.run_sweep(circuit,
params=sweep,
repetitions=repetitions)
def test_aqt_sampler():
put_call_args0 = {
'access_token': 'testkey',
'id': '2131da',
}
e_return = EngineReturn()
with mock.patch('cirq.aqt.aqt_sampler.put',
return_value=e_return,
side_effect=e_return.update) as mock_method:
theta = sympy.Symbol('theta')
num_points = 1
max_angle = np.pi
repetitions = 10
sampler = AQTSampler(remote_host="http://localhost:5000",
access_token='testkey')
device, qubits = get_aqt_device(1)
circuit = Circuit(X(qubits[0])**theta, device=device)
sweep = study.Linspace(key='theta',
start=0.1,
stop=max_angle / np.pi,
length=num_points)
results = sampler.run_sweep(circuit,
params=sweep,
repetitions=repetitions)
excited_state_probs = np.zeros(num_points)
for i in range(num_points):
excited_state_probs[i] = np.mean(results[i].measurements['m'])
callargs = mock_method.call_args[1]['data']
for keys in put_call_args0:
assert callargs[keys] == put_call_args0[keys]
assert mock_method.call_count == 3
def rabi_oscillations(sampler: sim.SimulatesSamples, qubit: devices.GridQubit,
max_angle: float = 2 * np.pi, *,
repetitions: int = 1000,
num_points: int = 200) -> RabiResult:
"""Runs a Rabi oscillation experiment.
Rotates a qubit around the x-axis of the Bloch sphere by a sequence of Rabi
angles evenly spaced between 0 and max_angle. For each rotation, repeat
the circuit a number of times and measure the average probability of the
qubit being in the |1> state.
Args:
sampler: The quantum engine or simulator to run the circuits.
qubit: The qubit under test.
max_angle: The final Rabi angle in radians.
repetitions: The number of repetitions of the circuit for each Rabi
angle.
num_points: The number of Rabi angles.
Returns:
A RabiResult object that stores and plots the result.
"""
theta = sympy.Symbol('theta')
circuit = circuits.Circuit.from_ops(ops.X(qubit) ** theta)
circuit.append(ops.measure(qubit, key='z'))
sweep = study.Linspace(key='theta', start=0.0, stop=max_angle / np.pi,
length=num_points)
results = sampler.run_sweep(circuit, params=sweep, repetitions=repetitions)
angles = np.linspace(0.0, max_angle, num_points)
excited_state_probs = np.zeros(num_points)
for i in range(num_points):
excited_state_probs[i] = np.mean(results[i].measurements['z'])
return RabiResult(angles, excited_state_probs)
def t1_decay(
sampler: 'cirq.Sampler',
*,
qubit: 'cirq.Qid',
num_points: int,
max_delay: 'cirq.DURATION_LIKE',
min_delay: 'cirq.DURATION_LIKE' = None,
repetitions: int = 1000,
) -> 'cirq.experiments.T1DecayResult':
"""Runs a t1 decay experiment.
Initializes a qubit into the |1⟩ state, waits for a variable amount of time,
and measures the qubit. Plots how often the |1⟩ state is observed for each
amount of waiting.
Args:
sampler: The quantum engine or simulator to run the circuits.
qubit: The qubit under test.
num_points: The number of evenly spaced delays to test.
max_delay: The largest delay to test.
min_delay: The smallest delay to test. Defaults to no delay.
repetitions: The number of repetitions of the circuit for each delay.
Returns:
A T1DecayResult object that stores and can plot the data.
"""
min_delay_dur = value.Duration(min_delay)
max_delay_dur = value.Duration(max_delay)
if repetitions <= 0:
raise ValueError('repetitions <= 0')
if max_delay_dur < min_delay_dur:
raise ValueError('max_delay < min_delay')
if min_delay_dur < 0:
raise ValueError('min_delay < 0')
var = sympy.Symbol('delay_ns')
sweep = study.Linspace(var,
start=min_delay_dur.total_nanos(),
stop=max_delay_dur.total_nanos(),
length=num_points)
circuit = circuits.Circuit(
ops.X(qubit),
ops.wait(qubit, nanos=var),
ops.measure(qubit, key='output'),
)
results = sampler.sample(circuit, params=sweep, repetitions=repetitions)
# Cross tabulate into a delay_ns, false_count, true_count table.
tab = pd.crosstab(results.delay_ns, results.output)
tab.rename_axis(None, axis="columns", inplace=True)
tab = tab.rename(columns={0: 'false_count', 1: 'true_count'}).reset_index()
for col_index, name in [(1, 'false_count'), (2, 'true_count')]:
if name not in tab:
tab.insert(col_index, name, [0] * tab.shape[0])
return T1DecayResult(tab)
def test_aqt_sampler_sim_xtalk():
num_points = 10
max_angle = np.pi
repetitions = 100
num_qubits = 4
device, qubits = get_aqt_device(num_qubits)
sampler = AQTSamplerLocalSimulator()
sampler.simulate_ideal = False
circuit = Circuit(X(qubits[0]), X(qubits[3]), X(qubits[2]), device=device)
sweep = study.Linspace(key='theta',
start=0.1,
stop=max_angle / np.pi,
length=num_points)
_results = sampler.run_sweep(circuit, params=sweep, repetitions=repetitions)
def test_aqt_sampler_empty_circuit():
num_points = 10
max_angle = np.pi
repetitions = 1000
num_qubits = 4
device, _qubits = get_aqt_device(num_qubits)
sampler = AQTSamplerLocalSimulator()
sampler.simulate_ideal = True
circuit = Circuit(device=device)
sweep = study.Linspace(key='theta',
start=0.1,
stop=max_angle / np.pi,
length=num_points)
with pytest.raises(RuntimeError):
_results = sampler.run_sweep(circuit,
params=sweep,
repetitions=repetitions)
def test_aqt_sampler_sim():
theta = sympy.Symbol('theta')
num_points = 10
max_angle = np.pi
repetitions = 1000
num_qubits = 4
device, qubits = get_aqt_device(num_qubits)
sampler = AQTSamplerLocalSimulator()
sampler.simulate_ideal = True
circuit = Circuit(X(qubits[3])**theta, device=device)
sweep = study.Linspace(key='theta',
start=0.1,
stop=max_angle / np.pi,
length=num_points)
results = sampler.run_sweep(circuit, params=sweep, repetitions=repetitions)
excited_state_probs = np.zeros(num_points)
for i in range(num_points):
excited_state_probs[i] = np.mean(results[i].measurements['m'])
assert excited_state_probs[-1] == 0.25
def t2_decay(
sampler: 'cirq.Sampler',
*,
qubit: 'cirq.Qid',
experiment_type: 'ExperimentType' = ExperimentType.RAMSEY,
num_points: int,
max_delay: 'cirq.DURATION_LIKE',
min_delay: 'cirq.DURATION_LIKE' = None,
repetitions: int = 1000,
delay_sweep: Optional[study.Sweep] = None,
num_pulses: List[int] = None
) -> Union['cirq.experiments.T2DecayResult',
List['cirq.experiments.T2DecayResult']]:
"""Runs a t2 transverse relaxation experiment.
Initializes a qubit into a superposition state, evolves the system using
rules determined by the experiment type and by the delay parameters,
then rotates back for measurement. This will measure the phase decoherence
decay. This experiment has three types of T2 metrics, each which measure
a different slice of the noise spectrum.
For the Ramsey experiment type (often denoted T2*), the state will be
prepared with a square root Y gate (`cirq.Y ** 0.5`) and then waits for
a variable amount of time. After this time, it will do basic state
tomography to measure the expectation of the Pauli-X and Pauli-Y operators
by performing either a `cirq.Y ** -0.5` or `cirq.X ** 0.5`. The square of
these two measurements is summed to determine the length of the Bloch
vector. This experiment measures the phase decoherence of the system under
free evolution.
For the Hahn echo experiment (often denoted T2 or spin echo), the state
will also be prepared with a square root Y gate (`cirq.Y ** 0.5`).
However, during the mid-point of the delay time being measured, a pi-pulse
(`cirq.X`) gate will be applied to cancel out inhomogeneous dephasing.
The same method of measuring the final state as Ramsey experiment is applied
after the second half of the delay period. See the animation on the wiki
page https://en.wikipedia.org/wiki/Spin_echo for a visual illustration
of this experiment.
CPMG, or the Carr-Purcell-Meiboom-Gill sequence, involves using a sqrt(Y)
followed by a sequence of pi pulses (X gates) in a specific timing pattern:
π/2, t, π, 2t, π, ... 2t, π, t
The first pulse, a sqrt(Y) gate, will put the qubit's state on the Bloch
equator. After a delay, successive X gates will refocus dehomogenous
phase effects by causing them to precess in opposite directions and
averaging their effects across the entire pulse train.
This pulse pattern has two variables that can be adjusted. The first,
denoted as 't' in the above sequence, is delay, which can be specified
with `delay_min` and `delay_max` or by using a `delay_sweep`, similar to
the other experiments. The second variable is the number of pi pulses
(X gates). This can be specified as a list of integers using the
`num_pulses` parameter. If multiple different pulses are specified,
the data will be presented in a data frame with two
indices (delay_ns and num_pulses).
See the following reference for more information about CPMG pulse trains:
Meiboom, S., and D. Gill, “Modified spin-echo method for measuring nuclear
relaxation times”, Rev. Sci. Inst., 29, 688–691 (1958).
https://doi.org/10.1063/1.1716296
Note that interpreting T2 data is fairly tricky and subtle, as it can
include other effects that need to be accounted for. For instance,
amplitude damping (T1) will present as T2 noise and needs to be
appropriately compensated for to find a true measure of T2. Due to this
subtlety and lack of standard way to interpret the data, the fitting
of the data to an exponential curve and the extrapolation of an actual
T2 time value is left as an exercise to the reader.
Args:
sampler: The quantum engine or simulator to run the circuits.
qubit: The qubit under test.
experiment_type: The type of T2 test to run.
num_points: The number of evenly spaced delays to test.
max_delay: The largest delay to test.
min_delay: The smallest delay to test. Defaults to no delay.
repetitions: The number of repetitions of the circuit
for each delay and for each tomography result.
delay_sweep: Optional range of time delays to sweep across. This should
be a SingleSweep using the 'delay_ns' with values in integer number
of nanoseconds. If specified, this will override the max_delay and
min_delay parameters. If not specified, the experiment will sweep
from min_delay to max_delay with linear steps.
num_pulses: For CPMG, a list of the number of pulses to use.
If multiple pulses are specified, each will be swept on.
Returns:
A T2DecayResult object that stores and can plot the data.
"""
min_delay_dur = value.Duration(min_delay)
max_delay_dur = value.Duration(max_delay)
# Input validation
if repetitions <= 0:
raise ValueError('repetitions <= 0')
if max_delay_dur < min_delay_dur:
raise ValueError('max_delay < min_delay')
if min_delay_dur < 0:
raise ValueError('min_delay < 0')
if num_pulses and experiment_type != ExperimentType.CPMG:
raise ValueError('num_pulses is only valid for CPMG experiments.')
# Initialize values used in sweeps
delay_var = sympy.Symbol('delay_ns')
inv_x_var = sympy.Symbol('inv_x')
inv_y_var = sympy.Symbol('inv_y')
max_pulses = max(num_pulses) if num_pulses else 0
if not delay_sweep:
delay_sweep = study.Linspace(delay_var,
start=min_delay_dur.total_nanos(),
stop=max_delay_dur.total_nanos(),
length=num_points)
if delay_sweep.keys != ['delay_ns']:
raise ValueError('delay_sweep must be a SingleSweep '
'with delay_ns parameter')
if experiment_type == ExperimentType.RAMSEY:
# Ramsey T2* experiment
# Use sqrt(Y) to flip to the equator.
# Evolve the state for a given amount of delay time
# Then measure the state in both X and Y bases.
circuit = circuits.Circuit(
ops.Y(qubit)**0.5,
ops.wait(qubit, nanos=delay_var),
)
else:
if experiment_type == ExperimentType.HAHN_ECHO:
# Hahn / Spin Echo T2 experiment
# Use sqrt(Y) to flip to the equator.
# Evolve the state for the given amount of delay time
# Flip the state using an X gate
# Evolve the state for the given amount of delay time
# Then measure the state in both X and Y bases.
num_pulses = [0]
# This is equivalent to a CPMG experiment with zero pulses
# and will follow the same code path.
# Carr-Purcell-Meiboom-Gill sequence.
# Performs the following sequence
# π/2 - wait(t) - π - wait(2t) - ... - π - wait(t)
# There will be N π pulses (X gates)
# where N sweeps over the values of num_pulses
#
if not num_pulses:
raise ValueError('At least one value must be given '
'for num_pulses in a CPMG experiment')
circuit = _cpmg_circuit(qubit, delay_var, max_pulses)
# Add simple state tomography
circuit.append(ops.X(qubit)**inv_x_var)
circuit.append(ops.Y(qubit)**inv_y_var)
circuit.append(ops.measure(qubit, key='output'))
tomography_sweep = study.Zip(
study.Points('inv_x', [0.0, 0.5]),
study.Points('inv_y', [-0.5, 0.0]),
)
if num_pulses and max_pulses > 0:
pulse_sweep = _cpmg_sweep(num_pulses)
sweep = study.Product(delay_sweep, pulse_sweep, tomography_sweep)
else:
sweep = study.Product(delay_sweep, tomography_sweep)
# Tabulate measurements into a histogram
results = sampler.sample(circuit, params=sweep, repetitions=repetitions)
y_basis_measurements = results[abs(results.inv_y) > 0].copy()
x_basis_measurements = results[abs(results.inv_x) > 0].copy()
if num_pulses and len(num_pulses) > 1:
cols = tuple(f'pulse_{t}' for t in range(max_pulses))
x_basis_measurements[
'num_pulses'] = x_basis_measurements.loc[:, cols].sum(axis=1)
y_basis_measurements[
'num_pulses'] = y_basis_measurements.loc[:, cols].sum(axis=1)
x_basis_tabulation = _create_tabulation(x_basis_measurements)
y_basis_tabulation = _create_tabulation(y_basis_measurements)
# Return the results in a container object
return T2DecayResult(x_basis_tabulation, y_basis_tabulation)
def t2_decay(
sampler: work.Sampler,
*,
qubit: devices.GridQubit,
experiment_type: 'ExperimentType' = ExperimentType.RAMSEY,
num_points: int,
max_delay: 'cirq.DURATION_LIKE',
min_delay: 'cirq.DURATION_LIKE' = None,
repetitions: int = 1000,
delay_sweep: Optional[study.Sweep] = None,
) -> 'cirq.experiments.T2DecayResult':
"""Runs a t2 transverse relaxation experiment.
Initializes a qubit into a superposition state, evolves the system using
rules determined by the experiment type and by the delay parameters,
then rotates back for measurement. This will measure the phase decoherence
decay. This experiment has three types of T2 metrics, each which measure
a different slice of the noise spectrum.
For the Ramsey experiment type (often denoted T2*), the state will be
prepared with a square root Y gate (`cirq.Y ** 0.5`) and then waits for
a variable amount of time. After this time, it will do basic state
tomography to measure the expectation of the Pauli-X and Pauli-Y operators
by performing either a `cirq.Y ** -0.5` or `cirq.X ** -0.5`. The square of
these two measurements is summed to determine the length of the Bloch
vector. This experiment measures the phase decoherence of the system under
free evolution.
For the Hahn echo experiment (often denoted T2 or spin echo), the state
will also be prepared with a square root Y gate (`cirq.Y ** 0.5`).
However, during the mid-point of the delay time being measured, a pi-pulse
(`cirq.X`) gate will be applied to cancel out inhomogeneous dephasing.
The same method of measuring the final state as Ramsey experiment is applied
after the second half of the delay period.
CPMG, or the Carr-Purcell-Meiboom-Gill sequence, is currently not
implemented.
Args:
sampler: The quantum engine or simulator to run the circuits.
qubit: The qubit under test.
experiment_type: The type of T2 test to run.
num_points: The number of evenly spaced delays to test.
max_delay: The largest delay to test.
min_delay: The smallest delay to test. Defaults to no delay.
repetitions: The number of repetitions of the circuit
for each delay and for each tomography result.
delay_sweep: Optional range of time delays to sweep across. This should
be a SingleSweep using the 'delay_ns' with values in integer number
of nanoseconds. If specified, this will override the max_delay and
min_delay parameters. If not specified, the experiment will sweep
from min_delay to max_delay with linear steps.
Returns:
A T2DecayResult object that stores and can plot the data.
"""
min_delay_dur = value.Duration(min_delay)
max_delay_dur = value.Duration(max_delay)
# Input validation
if repetitions <= 0:
raise ValueError('repetitions <= 0')
if max_delay_dur < min_delay_dur:
raise ValueError('max_delay < min_delay')
if min_delay_dur < 0:
raise ValueError('min_delay < 0')
# Initialize values used in sweeps
delay_var = sympy.Symbol('delay_ns')
inv_x_var = sympy.Symbol('inv_x')
inv_y_var = sympy.Symbol('inv_y')
if not delay_sweep:
delay_sweep = study.Linspace(delay_var,
start=min_delay_dur.total_nanos(),
stop=max_delay_dur.total_nanos(),
length=num_points)
if delay_sweep.keys != ['delay_ns']:
raise ValueError('delay_sweep must be a SingleSweep '
'with delay_ns parameter')
if experiment_type == ExperimentType.RAMSEY:
# Ramsey T2* experiment
# Use sqrt(Y) to flip to the equator.
# Evolve the state for a given amount of delay time
# Then measure the state in both X and Y bases.
circuit = circuits.Circuit(
ops.Y(qubit)**0.5,
ops.WaitGate(value.Duration(nanos=delay_var))(qubit),
ops.X(qubit)**inv_x_var,
ops.Y(qubit)**inv_y_var,
ops.measure(qubit, key='output'),
)
tomography_sweep = study.Zip(
study.Points('inv_x', [0.0, -0.5]),
study.Points('inv_y', [-0.5, 0.0]),
)
sweep = study.Product(delay_sweep, tomography_sweep)
elif experiment_type == ExperimentType.HAHN_ECHO:
# Hahn / Spin Echo T2 experiment
# Use sqrt(Y) to flip to the equator.
# Evolve the state for half the given amount of delay time
# Flip the state using an X gate
# Evolve the state for half the given amount of delay time
# Then measure the state in both X and Y bases.
circuit = circuits.Circuit(
ops.Y(qubit)**0.5,
ops.WaitGate(value.Duration(nanos=0.5 * delay_var))(qubit),
ops.X(qubit),
ops.WaitGate(value.Duration(nanos=0.5 * delay_var))(qubit),
ops.X(qubit)**inv_x_var,
ops.Y(qubit)**inv_y_var,
ops.measure(qubit, key='output'),
)
tomography_sweep = study.Zip(
study.Points('inv_x', [0.0, 0.5]),
study.Points('inv_y', [-0.5, 0.0]),
)
sweep = study.Product(delay_sweep, tomography_sweep)
else:
raise ValueError(f'Experiment type {experiment_type} not supported')
# Tabulate measurements into a histogram
results = sampler.sample(circuit, params=sweep, repetitions=repetitions)
y_basis_measurements = results[abs(results.inv_y) > 0]
x_basis_measurements = results[abs(results.inv_x) > 0]
x_basis_tabulation = pd.crosstab(
x_basis_measurements.delay_ns,
x_basis_measurements.output).reset_index()
y_basis_tabulation = pd.crosstab(
y_basis_measurements.delay_ns,
y_basis_measurements.output).reset_index()
# If all measurements are 1 or 0, fill in the missing column with all zeros.
for tab in [x_basis_tabulation, y_basis_tabulation]:
for col_index, name in [(1, 0), (2, 1)]:
if name not in tab:
tab.insert(col_index, name, [0] * tab.shape[0])
# Return the results in a container object
return T2DecayResult(x_basis_tabulation, y_basis_tabulation)
