Exemplo n.º 1
0
    def setup_irqs(self):
        
        irq_set = c.vfio_irq_set()
        c.resize(irq_set, c.sizeof(c.vfio_irq_set) + c.sizeof(c.c_uint))
        irq_set.argsz = c.sizeof(c.vfio_irq_set) + c.sizeof(c.c_uint)
	if self._msix_avail:
		print "[+] enabling msi-x"
		irq_set.index = c.VFIO_PCI_MSIX_IRQ_INDEX
	elif self._msi_avail:
		print "[+] enabling msi"
		irq_set.index = c.VFIO_PCI_MSI_IRQ_INDEX
	else:
		print "[+] enabling intx"
		irq_set.index = c.VFIO_PCI_INTX_IRQ_INDEX
        irq_set.start = 0
        irq_set.count = 1
        irq_set.flags = c.VFIO_IRQ_SET_DATA_EVENTFD | c.VFIO_IRQ_SET_ACTION_TRIGGER

        self.eventfd = c.eventfd(0, 0)
        c.cast(c.addressof(irq_set.data), c.POINTER(c.c_uint))[0] = self.eventfd

        ioctl(self.device, c.VFIO_DEVICE_SET_IRQS, irq_set)
Exemplo n.º 2
0
    def setup_irqs(self):

        irq_set = c.vfio_irq_set()
        c.resize(irq_set, c.sizeof(c.vfio_irq_set) + c.sizeof(c.c_uint))
        irq_set.argsz = c.sizeof(c.vfio_irq_set) + c.sizeof(c.c_uint)
        if self._msix_avail:
            print "[+] enabling msi-x"
            irq_set.index = c.VFIO_PCI_MSIX_IRQ_INDEX
        elif self._msi_avail:
            print "[+] enabling msi"
            irq_set.index = c.VFIO_PCI_MSI_IRQ_INDEX
        else:
            print "[+] enabling intx"
            irq_set.index = c.VFIO_PCI_INTX_IRQ_INDEX
        irq_set.start = 0
        irq_set.count = 1
        irq_set.flags = c.VFIO_IRQ_SET_DATA_EVENTFD | c.VFIO_IRQ_SET_ACTION_TRIGGER

        self.eventfd = c.eventfd(0, 0)
        c.cast(c.addressof(irq_set.data),
               c.POINTER(c.c_uint))[0] = self.eventfd

        ioctl(self.device, c.VFIO_DEVICE_SET_IRQS, irq_set)
Exemplo n.º 3
0
    def _device_setup(self):
        dev = self.dev
        mm = self.mm
        dev.drv = self
        print "[+] initializing device"
        dev.init()
        print "[+] resetting device"
        dev.reset()
        sleep(0.5)

        if dev.pci.misc_host_ctrl.enable_tagged_status_mode == 0:
            print "[+] enabling tagged status mode"
            dev.pci.misc_host_ctrl.enable_tagged_status_mode = 1

        dma_wmm = 0x6
        if dev.config.caps['pcie'].max_payload_size > 0:
            dma_wmm += 0x1

        if dev.pci.dma_rw_ctrl.dma_write_watermark != dma_wmm:
            print "[+] configuring dma write watermark"
            dev.pci.dma_rw_ctrl.dma_write_watermark = dma_wmm

        if not dev.pci.dma_rw_ctrl.disable_cache_alignment:
            print "[+] disabling pci dma alignment"
            dev.pci.dma_rw_ctrl.disable_cache_alignment = 1

        if dev.msi.mode.msix_multi_vector_mode:
            print "[+] disabling multi vector mode"
            dev.msi.mode.msix_multi_vector_mode = 0

        if not dev.grc.misc_local_control.interrupt_on_attention:
            print "[+] configuring interrupts on grc attention"
            dev.grc.misc_local_control.interrupt_on_attention = 1

        if not dev.grc.misc_local_control.auto_seeprom:
            print "[+] configuring automatic eeprom access mode"
            dev.grc.misc_local_control.auto_seeprom = 1

        if not dev.grc.misc_config.timer_prescaler == 0x41:
            print "[+] configuring grc timer prescaler"
            dev.grc.misc_config.timer_prescaler = 0x41

        if not dev.grc.mode.host_send_bds:
            print "[+] enabling host send bds"
            self.dev.grc.mode.send_no_pseudo_header_cksum = 1
            self.dev.grc.mode.host_send_bds = 1

        if not dev.grc.mode.host_stack_up:
            print "[+] setting host stack up"
            dev.grc.mode.host_stack_up = 1

        if dev.bufman.dma_mbuf_low_watermark.count != 0x2a:
            print "[+] setting dma mbuf low watermark"
            dev.bufman.dma_mbuf_low_watermark.count = 0x2a

        if dev.bufman.mbuf_high_watermark.count != 0xa0:
            print "[+] setting mbuf high watermark"
            dev.bufman.mbuf_high_watermark.count = 0xa0

        if dev.emac.low_watermark_max_receive_frame.count != 1:
            print "[+] configuring dma low watermark flow control"
            dev.emac.low_watermark_max_receive_frame.count = 1

        dev.bufman.mode.attention_enable = 1
        dev.bufman.block_enable()

        if dev.rbdi.std_ring_replenish_threshold.count != 0x19:
            print "[+] configuring standard rx producer ring replenish threshold"
            dev.rbdi.std_ring_replenish_threshold.count = 0x19

        self._init_rx_rings()

        dev.hpmb.box[tg.mb_rbd_standard_producer].low = 0

        dev.rbdi.std_ring_replenish_watermark.count = 0x20

        self._init_tx_rings()
        dev.hpmb.box[tg.mb_sbd_host_producer].low = 0

        self._init_rr_rings()

        self.mac_addr = [
            getattr(dev.emac.addr[0], "byte_%d" % (i + 1)) for i in range(6)
        ]

        print("[+] device mac addr: %02x" +
              (":%02x" * 5)) % tuple(self.mac_addr)

        print "[+] configuring tx mac"
        dev.emac.tx_random_backoff = sum(self.mac_addr) & 0x3ff
        dev.emac.tx_mac_lengths.ipg = 0x6
        dev.emac.tx_mac_lengths.ipg_crs = 0x2
        dev.emac.tx_mac_lengths.slot = 0x20

        print "[+] configuring rx mac"
        dev.emac.rx_mtu = 1500
        dev.emac.rx_rules_conf.no_rules_matches_default_class = 2

        print "[+] configuring receive list placement"
        dev.rlp.config.default_interrupt_distribution_queue = 0
        dev.rlp.config.bad_frames_class = 1
        dev.rlp.config.number_of_active_lists = 0x10
        dev.rlp.config.number_of_lists_per_distribution_group = 1

        print "[+] enabling rx statistics"
        dev.rlp.stats_enable_mask.a1_silent_indication = 1
        dev.rlp.stats_enable_mask.cpu_mactq_priority_disable = 1
        dev.rlp.stats_enable_mask.enable_cos_stats = 1
        dev.rlp.stats_enable_mask.enable_indiscard_stats = 1
        dev.rlp.stats_enable_mask.enable_inerror_stats = 1
        dev.rlp.stats_enable_mask.enable_no_more_rbd_stats = 0
        dev.rlp.stats_enable_mask.perst_l = 1
        dev.rlp.stats_enable_mask.rc_return_ring_enable = 0
        dev.rlp.stats_enable_mask.rss_priority = 0
        assert dev.rlp.stats_enable_mask.word == 0x7bffff
        dev.rlp.stats_control.statistics_enable = 1

        print "[+] enabling tx statistics"
        dev.sdi.statistics_mask.counters_enable_mask = 1
        dev.sdi.statistics_control.faster_update = 1
        dev.sdi.statistics_control.statistics_enable = 1

        dev.hc.block_disable()
        print "[+] configuring host coalesence"

        dev.hc.mode.status_block_size = 2
        dev.hc.mode.clear_ticks_mode_on_rx = 1

        dev.hc.rx_coal_ticks = 0x48
        dev.hc.tx_coal_ticks = 0x14
        dev.hc.rx_max_coal_bds = 0x05
        dev.hc.tx_max_coal_bds = 0x35
        dev.hc.rc_max_coal_bds_in_int = 0x05
        dev.hc.tx_max_coal_bds_in_int = 0x05

        self.status_block_vaddr = mm.alloc(c.sizeof(tg.status_block))
        self.status_block = c.cast(self.status_block_vaddr,
                                   c.POINTER(tg.status_block))[0]

        self.status_block_paddr = mm.get_paddr(self.status_block_vaddr)

        dev.hc.status_block_host_addr_hi = self.status_block_paddr >> 32
        dev.hc.status_block_host_addr_low = self.status_block_paddr & 0xffffffff

        dev.hc.block_enable()

        dev.rbdc.mode.attention_enable = 1
        dev.rbdc.block_enable()

        dev.rlp.block_enable()

        if not dev.emac.mode.en_fhde:
            print "[+] enabling frame header dma engine"
            dev.emac.mode.en_fhde = 1

        if not dev.emac.mode.en_rde:
            print "[+] enabling receive dma engine"
            dev.emac.mode.en_rde = 1

        if not dev.emac.mode.en_tde:
            print "[+] enabling transmit dma engine"
            dev.emac.mode.en_tde = 1

        print "[+] clearing rx statistics"
        dev.emac.mode.clear_rx_statistics = 1

        print "[+] clearing tx statistics"
        dev.emac.mode.clear_tx_statistics = 1

        while dev.emac.mode.clear_rx_statistics:
            pass

        while dev.emac.mode.clear_tx_statistics:
            pass

        if not dev.emac.mode.en_rx_statistics:
            print "[+] enabling rx statistics"
            dev.emac.mode.en_rx_statistics = 1

        if not dev.emac.mode.en_tx_statistics:
            print "[+] enabling tx statistics"
            dev.emac.mode.en_tx_statistics = 1

        if not dev.emac.event_enable.link_state_changed:
            print "[+] enabling emac attention on link statue changed"
            dev.emac.event_enable.link_state_changed = 1

        if not dev.grc.mode.int_on_mac_attn:
            print "[+] enabling interrupt on mac attention"
            dev.grc.mode.int_on_mac_attn = 1

        print "[+] configuringing write dma engine"
        dev.wdma.mode.write_dma_pci_target_abort_attention_enable = 1
        dev.wdma.mode.write_dma_pci_master_abort_attention_enable = 1
        dev.wdma.mode.write_dma_pci_parity_attention_enable = 1
        dev.wdma.mode.write_dma_pci_host_address_overflow_attention_enable = 1
        dev.wdma.mode.write_dma_pci_fifo_overrun_attention_enable = 1
        dev.wdma.mode.write_dma_pci_fifo_underrun_attention_enable = 1
        dev.wdma.mode.write_dma_pci_fifo_overwrite_attention_enable = 1
        dev.wdma.mode.write_dma_local_memory = 1
        dev.wdma.mode.write_dma_pci_parity_error_attention_enable = 1
        dev.wdma.mode.write_dma_pci_host_address_overflow_error_attention_enable = 1
        dev.wdma.mode.status_tag_fix_enable = 1
        dev.wdma.mode.reserved2 = 0
        dev.wdma.block_enable()

        print "[+] configuring read dma engine"
        dev.rdma.mode.read_dma_pci_target_abort_attention_enable = 1
        dev.rdma.mode.read_dma_pci_master_abort_attention_enable = 1
        dev.rdma.mode.read_dma_pci_parity_error_attention_enable = 1
        dev.rdma.mode.read_dma_pci_host_address_overflow_error_attention_enable = 1
        dev.rdma.mode.read_dma_pci_fifo_overrun_attention_enable = 1
        dev.rdma.mode.read_dma_pci_fifo_underrun_attention_enable = 1
        dev.rdma.mode.read_dma_pci_fifo_overread_attention_enable = 1
        dev.rdma.mode.read_dma_local_memory_write_longer_than_dma_length_attention_enable = 1
        dev.rdma.mode.read_dma_pci_x_split_transaction_timeout_expired_attention_enable = 0
        dev.rdma.mode.bd_sbd_corruption_attn_enable = 0
        dev.rdma.mode.mbuf_rbd_corruption_attn_enable = 0
        dev.rdma.mode.mbuf_sbd_corruption_attn_enable = 0
        dev.rdma.mode.reserved3 = 0
        dev.rdma.mode.pci_request_burst_length = 3
        dev.rdma.mode.reserved2 = 0
        dev.rdma.mode.jumbo_2k_mmrr_mode = 1
        dev.rdma.mode.mmrr_disable = 0
        dev.rdma.mode.address_overflow_error_logging_enable = 0
        dev.rdma.mode.post_dma_debug_enable = 0
        dev.rdma.mode.hardware_ipv4_post_dma_processing_enable = 0
        dev.rdma.mode.hardware_ipv6_post_dma_processing_enable = 0
        dev.rdma.mode.in_band_vtag_enable = 0
        dev.rdma.mode.reserved = 0
        dev.rdma.block_enable()

        dev.rdc.mode.attention_enable = 1
        dev.rdc.block_enable()

        dev.sdc.block_enable()

        dev.sbdc.mode.attention_enable = 1
        dev.sbdc.block_enable()

        dev.rbdi.mode.receive_bds_available_on_disabled_rbd_ring_attn_enable = 1
        dev.rbdi.block_enable()

        dev.rdi.mode.illegal_return_ring_size = 1
        dev.rdi.block_enable()

        dev.sdi.mode.multiple_segment_enable = 0
        dev.sdi.mode.hardware_pre_dma_enable = 0
        dev.sdi.block_enable()

        dev.sbdi.mode.attention_enable = 1
        dev.sbdi.block_enable()

        dev.sbds.mode.attention_enable = 1
        dev.sbds.block_enable()

        self._populate_rx_ring()

        print "[+] enabling transmit mac"
        dev.emac.tx_mac_mode.enable_bad_txmbuf_lockup_fix = 1
        dev.emac.tx_mac_mode.enable_flow_control = 1
        dev.emac.tx_mac_mode.enable = 1

        usleep(100)

        print "[+] enabling receive mac"
        #dev.emac.mac_hash_0 = 0xffffffff
        #dev.emac.mac_hash_1 = 0xffffffff
        #dev.emac.mac_hash_2 = 0xffffffff
        #dev.emac.mac_hash_3 = 0xffffffff
        dev.emac.rx_mac_mode.promiscuous_mode = 1
        dev.emac.rx_mac_mode.accept_runts = 1
        #dev.emac.rx_mac_mode.enable_flow_control = 1
        dev.emac.rx_mac_mode.rss_enable = 1
        #dev.emac.rx_mac_mode.rss_ipv4_hash_enable = 1
        #dev.emac.rx_mac_mode.rss_tcpipv4_hash_enable = 1
        #dev.emac.rx_mac_mode.rss_ipv6_hash_enable = 1
        #dev.emac.rx_mac_mode.rss_tcpipv6_hash_enable = 1
        dev.emac.rx_mac_mode.enable = 1

        usleep(10)

        print "[+] configuring led"
        dev.emac.led_control.word = 0x800

        dev.emac.low_watermark_max_receive_frames = 1
Exemplo n.º 4
0
    def _dev_open(self):
        print "[+] opening vfio group"
        group = os.open("/dev/vfio/%d" % self.groupno, os.O_RDWR)

        group_status = c.vfio_group_status()
        group_status.argsz = c.sizeof(c.vfio_group_status)
        ioctl(group, c.VFIO_GROUP_GET_STATUS, group_status)
        if not (group_status.flags & c.VFIO_GROUP_FLAGS_VIABLE):
            raise Exception("vfio group %d is not viable" % self.groupno)

        self.group = group

        ioctl(group, c.VFIO_GROUP_SET_CONTAINER, struct.pack("I", self.container))

        ioctl(self.container, c.VFIO_SET_IOMMU, c.VFIO_TYPE1_IOMMU)

        iommu_info = c.vfio_iommu_type1_info()
        iommu_info.argsz = c.sizeof(c.vfio_iommu_type1_info)
        ioctl(self.container, c.VFIO_IOMMU_GET_INFO, iommu_info)

        self.iommu_info = iommu_info

        print "[+] opening vfio device"
        device = c.ioctl(group, c.VFIO_GROUP_GET_DEVICE_FD, self.bdf)
        self.device = device

        device_info = c.vfio_device_info()
        device_info.argsz = c.sizeof(c.vfio_device_info)
        ioctl(device, c.VFIO_DEVICE_GET_INFO, device_info)

        print "[+] enumerating vfio device regions"
        self.regions = []
        for i in range(device_info.num_regions - 1):
            r = c.vfio_region_info()
            r.argsz = c.sizeof(c.vfio_region_info)
            r.index = i

            ioctl(device, c.VFIO_DEVICE_GET_REGION_INFO, r)

            self.regions += [r]
            flags = ""
            if r.flags & c.VFIO_REGION_INFO_FLAG_READ:
                flags += "R"

            if r.flags & c.VFIO_REGION_INFO_FLAG_WRITE:
                flags += "W"

            if r.flags & c.VFIO_REGION_INFO_FLAG_MMAP:
                flags += "M"

            t = "region %d" % r.index
            if i == c.VFIO_PCI_BAR0_REGION_INDEX:
                bar0 = c.mmap(0, r.size, c.PROT_READ | c.PROT_WRITE, c.MAP_SHARED | c.MAP_LOCKED, device, r.offset)
                self.bar0 = bar0
                self.bar0_sz = r.size
                t = "pci bar 0"
            elif i == c.VFIO_PCI_BAR2_REGION_INDEX:
                bar2 = c.mmap64(0, r.size, c.PROT_READ | c.PROT_WRITE, c.MAP_PRIVATE, device, r.offset)
                if 0xffffffffffffffff != bar2:
                    self.bar2 = bar2
                    self.bar2_sz = r.size
                t = "pci bar 2"
            elif i == c.VFIO_PCI_CONFIG_REGION_INDEX:
                self.config_offset = r.offset
                t = "pci config"
            print "[*] %s [%s]: size %04x, ofs %x, resv %x" % (t, flags, r.size, r.offset, r.resv)

        self.show_irqs()

        print "[+] enabling msi-x"
        irq_set = c.vfio_irq_set()
        c.resize(irq_set, c.sizeof(c.vfio_irq_set) + c.sizeof(c.c_uint))
        irq_set.argsz = c.sizeof(c.vfio_irq_set) + c.sizeof(c.c_uint)
        irq_set.index = c.VFIO_PCI_MSIX_IRQ_INDEX
        irq_set.start = 0
        irq_set.count = 1
        irq_set.flags = c.VFIO_IRQ_SET_DATA_EVENTFD | c.VFIO_IRQ_SET_ACTION_TRIGGER

        self.eventfd = c.eventfd(0, 0)
        c.cast(c.addressof(irq_set.data), c.POINTER(c.c_uint))[0] = self.eventfd

        ioctl(self.device, c.VFIO_DEVICE_SET_IRQS, irq_set)
Exemplo n.º 5
0
    def _device_setup(self):
        dev = self.dev
        mm = self.mm
        dev.drv = self
	print "[+] initializing device"
        dev.init()
        print "[+] resetting device"
        dev.reset()
        sleep(0.5)

        if dev.pci.misc_host_ctrl.enable_tagged_status_mode == 0:
            print "[+] enabling tagged status mode"
            dev.pci.misc_host_ctrl.enable_tagged_status_mode = 1

        dma_wmm = 0x6
        if dev.config.caps['pcie'].max_payload_size > 0:
            dma_wmm += 0x1

        if dev.pci.dma_rw_ctrl.dma_write_watermark != dma_wmm:
            print "[+] configuring dma write watermark"
            dev.pci.dma_rw_ctrl.dma_write_watermark = dma_wmm

        if not dev.pci.dma_rw_ctrl.disable_cache_alignment:
            print "[+] disabling pci dma alignment"
            dev.pci.dma_rw_ctrl.disable_cache_alignment = 1

        if dev.msi.mode.msix_multi_vector_mode:
            print "[+] disabling multi vector mode"
            dev.msi.mode.msix_multi_vector_mode = 0

        if not dev.grc.misc_local_control.interrupt_on_attention:
            print "[+] configuring interrupts on grc attention"
            dev.grc.misc_local_control.interrupt_on_attention = 1

        if not dev.grc.misc_local_control.auto_seeprom:
            print "[+] configuring automatic eeprom access mode"
            dev.grc.misc_local_control.auto_seeprom = 1

        if not dev.grc.misc_config.timer_prescaler == 0x41:
            print "[+] configuring grc timer prescaler"
            dev.grc.misc_config.timer_prescaler = 0x41

        if not dev.grc.mode.host_send_bds:
            print "[+] enabling host send bds"
            self.dev.grc.mode.send_no_pseudo_header_cksum = 1
            self.dev.grc.mode.host_send_bds = 1

        if not dev.grc.mode.host_stack_up:
            print "[+] setting host stack up"
            dev.grc.mode.host_stack_up = 1

        if dev.bufman.dma_mbuf_low_watermark.count != 0x2a:
            print "[+] setting dma mbuf low watermark"
            dev.bufman.dma_mbuf_low_watermark.count = 0x2a

        if dev.bufman.mbuf_high_watermark.count != 0xa0:
            print "[+] setting mbuf high watermark"
            dev.bufman.mbuf_high_watermark.count = 0xa0

        if dev.emac.low_watermark_max_receive_frame.count != 1:
            print "[+] configuring dma low watermark flow control"
            dev.emac.low_watermark_max_receive_frame.count = 1
        
        dev.bufman.mode.attention_enable = 1
        dev.bufman.block_enable()

        if dev.rbdi.std_ring_replenish_threshold.count != 0x19:
            print "[+] configuring standard rx producer ring replenish threshold"
            dev.rbdi.std_ring_replenish_threshold.count = 0x19

        self._init_rx_rings()

        dev.hpmb.box[tg.mb_rbd_standard_producer].low = 0

        dev.rbdi.std_ring_replenish_watermark.count = 0x20

        self._init_tx_rings()
        dev.hpmb.box[tg.mb_sbd_host_producer].low = 0

        self._init_rr_rings()

        self.mac_addr = [getattr(dev.emac.addr[0], "byte_%d" % (i + 1)) for i in range(6)]

        print ("[+] device mac addr: %02x" + (":%02x" * 5)) % tuple(self.mac_addr)

        print "[+] configuring tx mac"
        dev.emac.tx_random_backoff = sum(self.mac_addr) & 0x3ff
        dev.emac.tx_mac_lengths.ipg = 0x6
        dev.emac.tx_mac_lengths.ipg_crs = 0x2
        dev.emac.tx_mac_lengths.slot = 0x20
       
        print "[+] configuring rx mac"
        dev.emac.rx_mtu = 1500
        dev.emac.rx_rules_conf.no_rules_matches_default_class = 2
    
        print "[+] configuring receive list placement"
        dev.rlp.config.default_interrupt_distribution_queue = 0
        dev.rlp.config.bad_frames_class = 1
        dev.rlp.config.number_of_active_lists = 0x10
        dev.rlp.config.number_of_lists_per_distribution_group = 1

        print "[+] enabling rx statistics"
        dev.rlp.stats_enable_mask.a1_silent_indication = 1
        dev.rlp.stats_enable_mask.cpu_mactq_priority_disable = 1
        dev.rlp.stats_enable_mask.enable_cos_stats = 1
        dev.rlp.stats_enable_mask.enable_indiscard_stats = 1
        dev.rlp.stats_enable_mask.enable_inerror_stats = 1
        dev.rlp.stats_enable_mask.enable_no_more_rbd_stats = 0
        dev.rlp.stats_enable_mask.perst_l = 1
        dev.rlp.stats_enable_mask.rc_return_ring_enable = 0
        dev.rlp.stats_enable_mask.rss_priority = 0
        assert dev.rlp.stats_enable_mask.word == 0x7bffff
        dev.rlp.stats_control.statistics_enable = 1
 
        print "[+] enabling tx statistics"
        dev.sdi.statistics_mask.counters_enable_mask = 1
        dev.sdi.statistics_control.faster_update = 1
        dev.sdi.statistics_control.statistics_enable = 1
        
        dev.hc.block_disable()
        print "[+] configuring host coalesence"

        dev.hc.mode.status_block_size = 2
        dev.hc.mode.clear_ticks_mode_on_rx = 1

        dev.hc.rx_coal_ticks = 0x48
        dev.hc.tx_coal_ticks = 0x14
        dev.hc.rx_max_coal_bds = 0x05
        dev.hc.tx_max_coal_bds = 0x35
        dev.hc.rc_max_coal_bds_in_int = 0x05
        dev.hc.tx_max_coal_bds_in_int = 0x05

        self.status_block_vaddr = mm.alloc(c.sizeof(tg.status_block))
        self.status_block = c.cast(self.status_block_vaddr, c.POINTER(tg.status_block))[0]

        self.status_block_paddr = mm.get_paddr(self.status_block_vaddr)
        
        dev.hc.status_block_host_addr_hi = self.status_block_paddr >> 32
        dev.hc.status_block_host_addr_low = self.status_block_paddr & 0xffffffff

        dev.hc.block_enable()

        dev.rbdc.mode.attention_enable = 1
        dev.rbdc.block_enable()

        dev.rlp.block_enable()

        if not dev.emac.mode.en_fhde:
            print "[+] enabling frame header dma engine"
            dev.emac.mode.en_fhde = 1

        if not dev.emac.mode.en_rde:
            print "[+] enabling receive dma engine"
            dev.emac.mode.en_rde = 1

        if not dev.emac.mode.en_tde:
            print "[+] enabling transmit dma engine"
            dev.emac.mode.en_tde = 1

        print "[+] clearing rx statistics"
        dev.emac.mode.clear_rx_statistics = 1

        print "[+] clearing tx statistics"
        dev.emac.mode.clear_tx_statistics = 1

        while dev.emac.mode.clear_rx_statistics:
            pass

        while dev.emac.mode.clear_tx_statistics:
            pass

        if not dev.emac.mode.en_rx_statistics:
            print "[+] enabling rx statistics"
            dev.emac.mode.en_rx_statistics = 1

        if not dev.emac.mode.en_tx_statistics:
            print "[+] enabling tx statistics"
            dev.emac.mode.en_tx_statistics = 1

        if not dev.emac.event_enable.link_state_changed:
            print "[+] enabling emac attention on link statue changed"
            dev.emac.event_enable.link_state_changed = 1

        if not dev.grc.mode.int_on_mac_attn:
            print "[+] enabling interrupt on mac attention"
            dev.grc.mode.int_on_mac_attn = 1

        print "[+] configuringing write dma engine"
        dev.wdma.mode.write_dma_pci_target_abort_attention_enable = 1
        dev.wdma.mode.write_dma_pci_master_abort_attention_enable = 1
        dev.wdma.mode.write_dma_pci_parity_attention_enable = 1
        dev.wdma.mode.write_dma_pci_host_address_overflow_attention_enable = 1
        dev.wdma.mode.write_dma_pci_fifo_overrun_attention_enable = 1
        dev.wdma.mode.write_dma_pci_fifo_underrun_attention_enable = 1
        dev.wdma.mode.write_dma_pci_fifo_overwrite_attention_enable = 1
        dev.wdma.mode.write_dma_local_memory = 1
        dev.wdma.mode.write_dma_pci_parity_error_attention_enable = 1
        dev.wdma.mode.write_dma_pci_host_address_overflow_error_attention_enable = 1
        dev.wdma.mode.status_tag_fix_enable = 1
        dev.wdma.mode.reserved2 = 0
        dev.wdma.block_enable()

        print "[+] configuring read dma engine"
        dev.rdma.mode.read_dma_pci_target_abort_attention_enable = 1
        dev.rdma.mode.read_dma_pci_master_abort_attention_enable = 1
        dev.rdma.mode.read_dma_pci_parity_error_attention_enable = 1
        dev.rdma.mode.read_dma_pci_host_address_overflow_error_attention_enable = 1
        dev.rdma.mode.read_dma_pci_fifo_overrun_attention_enable = 1
        dev.rdma.mode.read_dma_pci_fifo_underrun_attention_enable = 1
        dev.rdma.mode.read_dma_pci_fifo_overread_attention_enable = 1
        dev.rdma.mode.read_dma_local_memory_write_longer_than_dma_length_attention_enable = 1
        dev.rdma.mode.read_dma_pci_x_split_transaction_timeout_expired_attention_enable = 0
        dev.rdma.mode.bd_sbd_corruption_attn_enable = 0
        dev.rdma.mode.mbuf_rbd_corruption_attn_enable = 0
        dev.rdma.mode.mbuf_sbd_corruption_attn_enable = 0
        dev.rdma.mode.reserved3 = 0
        dev.rdma.mode.pci_request_burst_length = 3
        dev.rdma.mode.reserved2 = 0
        dev.rdma.mode.jumbo_2k_mmrr_mode = 1
        dev.rdma.mode.mmrr_disable = 0
        dev.rdma.mode.address_overflow_error_logging_enable = 0
        dev.rdma.mode.post_dma_debug_enable = 0
        dev.rdma.mode.hardware_ipv4_post_dma_processing_enable = 0
        dev.rdma.mode.hardware_ipv6_post_dma_processing_enable = 0
        dev.rdma.mode.in_band_vtag_enable = 0
        dev.rdma.mode.reserved = 0
        dev.rdma.block_enable()

        dev.rdc.mode.attention_enable = 1
        dev.rdc.block_enable()

        dev.sdc.block_enable()

        dev.sbdc.mode.attention_enable = 1
        dev.sbdc.block_enable()

        dev.rbdi.mode.receive_bds_available_on_disabled_rbd_ring_attn_enable = 1
        dev.rbdi.block_enable()

        dev.rdi.mode.illegal_return_ring_size = 1
        dev.rdi.block_enable()

        dev.sdi.mode.multiple_segment_enable = 0
        dev.sdi.mode.hardware_pre_dma_enable = 0
        dev.sdi.block_enable()

        dev.sbdi.mode.attention_enable = 1
        dev.sbdi.block_enable()

        dev.sbds.mode.attention_enable = 1
        dev.sbds.block_enable()

        self._populate_rx_ring()

        print "[+] enabling transmit mac"
        dev.emac.tx_mac_mode.enable_bad_txmbuf_lockup_fix = 1
        dev.emac.tx_mac_mode.enable_flow_control = 1
        dev.emac.tx_mac_mode.enable = 1
        
        usleep(100)

        print "[+] enabling receive mac"
        #dev.emac.mac_hash_0 = 0xffffffff
        #dev.emac.mac_hash_1 = 0xffffffff
        #dev.emac.mac_hash_2 = 0xffffffff
        #dev.emac.mac_hash_3 = 0xffffffff
        dev.emac.rx_mac_mode.promiscuous_mode = 1
        dev.emac.rx_mac_mode.accept_runts = 1
        #dev.emac.rx_mac_mode.enable_flow_control = 1
        dev.emac.rx_mac_mode.rss_enable = 1
        #dev.emac.rx_mac_mode.rss_ipv4_hash_enable = 1
        #dev.emac.rx_mac_mode.rss_tcpipv4_hash_enable = 1
        #dev.emac.rx_mac_mode.rss_ipv6_hash_enable = 1
        #dev.emac.rx_mac_mode.rss_tcpipv6_hash_enable = 1
        dev.emac.rx_mac_mode.enable = 1

        usleep(10)

        print "[+] configuring led"
        dev.emac.led_control.word = 0x800

        dev.emac.low_watermark_max_receive_frames = 1