def destroy_port_info(dic=None):
if dic is not None:
load_dict = jfileutl.get_dict()
# 去除所有的端口数据
port_password = load_dict.get("port_password")
for port, data in port_password.items():
if data.get("id") == dic.get("id"):
# 写入bak的delConfig中
jfileutl.write_file_to_bak(port_password[port])
# 把它有效至为1就行
del port_password[port]
break
# 将指定端口墙了
Linux.delete_port([dic.get("server_port")])
# 更新到文件中去
jfileutl.write_file(load_dict)
# 重启ssr
Linux.restart_ssr()
else:
print("The agr can`t be null")
def clear_port_flow():
# 获取有效的端口
valid_port = port_service.get_valid_ports()
# 将他们的端口号至为flowMark都至为0
# 取出配置文件,且获取出要操作的那些数据
ssrj = jfileutl.get_dict()
port_info = ssrj.get('port_password')
for port in valid_port:
port_data = port_info.get(port)
port_data["flowMark"] = 0
# 将他们的流量都清空
port_data["used"] = 0
port_data["remain"] = port_data["total"]
print("The 1st of every month clear the flows,clear after the data:" %
(ssrj, ))
# 写到文件里去
jfileutl.write_file(ssrj)
# 将OUTPUT表中的数据流量全部清空
Linux.clear_output_port_flow()
# 重启ssr
Linux.restart_ssr()
def overdue_port_info(dic=None):
if dic is not None:
load_dict = jfileutl.get_dict()
# 去除所有的端口数据
port_password = load_dict.get("port_password")
for port, data in port_password.items():
if data.get("id") == dic.get("id"):
# 把它有效至为1就行
port_password[port]['flowMark'] = 1
port_password[port]['dateMark'] = 1
port_password[port]['used'] = port_password[port]['total']
port_password[port]['remain'] = 0
port_password[port]['endTm'] = datetime.strftime(
datetime.now(), "%Y-%m-%d")
break
# 将指定端口墙了
if Linux.delete_port([dic.get("server_port")]):
pass
# 更新到文件中去
jfileutl.write_file(load_dict)
# 重启ssr
Linux.restart_ssr()
else:
print("The agr can`t be null")
def update_port_info(dic=None, load_dict=None):
# 去除所有的端口数据
port_password = load_dict.get("port_password")
# 要操作数据
option_data = {}
old_port = 0
# 通过id 获取对应的端口数据
for port, data in port_password.items():
if data.get("id") == dic.get("id"):
option_data = data
old_port = port
# 删除这个port的数据
del port_password[port]
break
# 修改对应数据
userName = dic.get("userName")
password = dic.get("password")
client = dic.get("client")
port = dic.get("server_port")
method = dic.get("method")
protocol = dic.get("protocol")
obfs = dic.get("obfs")
limit = dic.get("limit")
remain = dic.get("remain")
total = dic.get("total")
used = dic.get("used")
# 判断是否需要更改有效标识
beginTm = dic.get("beginTm")
endTm = dic.get("endTm")
# 判断是否需要更改有效标识
dateMark = 1
flowMark = 1
today = datetime.strptime(datetime.strftime(datetime.now(), "%Y-%m-%d"),
"%Y-%m-%d")
# 如果结束日期大于今天就将有效标签改为0
if datetime.strptime(endTm, "%Y-%m-%d") >= today:
dateMark = 0
if int(remain) != 0:
flowMark = 0
# 设置是否有效标识
option_data["flowMark"] = flowMark
option_data["dateMark"] = dateMark
# 更新下面的数据
if password is not None:
option_data["password"] = password
if port is not None:
option_data["server_port"] = port
if method is not None:
option_data["method"] = method
if client is not None:
option_data["client"] = client
if protocol is not None:
option_data["protocol"] = protocol
if obfs is not None:
option_data["obfs"] = obfs
if limit is not None:
option_data["limit"] = limit
if total is not None:
option_data["total"] = int(total)
if remain is not None:
option_data["remain"] = int(total) - int(
used) if int(total) - int(used) > 0 else 0
if used is not None:
option_data["used"] = int(total)-int(option_data["remain"]) if int(total)-int(option_data["remain"]) \
> 0 else 0
if beginTm is not None:
option_data["beginTm"] = beginTm
if total is not None:
option_data["endTm"] = endTm
if userName is not None:
option_data["userName"] = userName
# 重新设置到字典中去
port_password[port] = option_data
# 判断端口是否改变
if int(port) != int(old_port):
# 更新端口墙规则
if Linux.update_port(old_port, port):
print("Update a rule of port,The origin:%s,The new:%s" %
(old_port, port))
# 更新到文件中去
jfileutl.write_file(load_dict)
# 重启ssr
Linux.restart_ssr()
def add_port_info(dic=None, load_dict=None):
port_password = load_dict.get("port_password")
if not port_password:
load_dict['port_password'] = {}
port_password = load_dict.get("port_password")
# 要添加的数据
option_data = {}
# 修改对应数据
id = dic.get("id")
userId = dic.get("userId")
userName = dic.get("userName")
password = dic.get("password")
client = dic.get("client")
port = dic.get("server_port")
method = dic.get("method")
protocol = dic.get("protocol")
obfs = dic.get("obfs")
limit = dic.get("limit")
used = dic.get("used", "0")
remain = dic.get("remain", "0")
total = dic.get("total")
beginTm = dic.get("beginTm")
endTm = dic.get("endTm")
# 判断是否需要更改有效标识
dateMark = 1
flowMark = 0
today = datetime.strptime(datetime.strftime(datetime.now(), "%Y-%m-%d"),
"%Y-%m-%d")
# 如果结束日期大于今天就将有效标签改为0
if datetime.strptime(endTm, "%Y-%m-%d") >= today:
dateMark = 0
# 设置是否有效标识
option_data["flowMark"] = flowMark
option_data["dateMark"] = dateMark
# 更新下面的数据
if id is not None:
option_data["id"] = id
if userId is not None:
option_data["userId"] = userId
if client is not None:
option_data["client"] = client
if userName is not None:
option_data["userName"] = userName
if password is not None:
option_data["password"] = password
if port is not None:
option_data["server_port"] = port
if method is not None:
option_data["method"] = method
if protocol is not None:
option_data["protocol"] = protocol
if limit is not None:
option_data["limit"] = limit
if obfs is not None:
option_data["obfs"] = obfs
if remain is not None:
option_data["remain"] = int(total)
if used is not None:
option_data["used"] = int(used) if used != '' else 0
if total is not None:
option_data["total"] = int(total)
if beginTm is not None:
option_data["beginTm"] = beginTm
if endTm is not None:
option_data["endTm"] = endTm
# 重新设置到字典中去
port_password[port] = option_data
# 判断端口是否改变
if Linux.add_port(option_data):
print("Insert a rule of port:%s" % (port))
# 更新到文件中去
jfileutl.write_file(load_dict)
# 重启ssr
Linux.restart_ssr()