def restore_with_frontend(url, engine_name, backup):
client = ControllerClient(url)
client.volume_frontend_shutdown()
cmd.backup_restore(url, backup)
wait_for_restore_completion(url, backup)
client.volume_frontend_start(FRONTEND_TGT_BLOCKDEV)
return
def test_inc_restore_failure_invalid_block(grpc_controller, grpc_replica1,
grpc_replica2,
grpc_controller_no_frontend,
grpc_fixed_dir_replica1,
grpc_fixed_dir_replica2,
backup_targets): # NOQA
# This case is for vfs backup only
for backup_target in backup_targets:
if "vfs" in backup_target:
break
assert backup_target
address = grpc_controller.address
dev = get_dev(grpc_replica1, grpc_replica2, grpc_controller)
zero_string = b'\x00'.decode('utf-8')
length0 = 256
snap0_data = random_string(length0)
verify_data(dev, 0, snap0_data)
verify_data(dev, BLOCK_SIZE, snap0_data)
snap0 = cmd.snapshot_create(address)
backup0 = create_backup(address, snap0, backup_target)["URL"]
backup0_name = cmd.backup_inspect(address, backup0)['Name']
# backup1: 32 random data + 32 zero data + 192 random data in 1st block
length1 = 32
offset1 = 32
snap1_data = zero_string * length1
verify_data(dev, offset1, snap1_data)
snap1 = cmd.snapshot_create(address)
backup1 = create_backup(address, snap1, backup_target)["URL"]
# start dr volume (no frontend)
dr_address = grpc_controller_no_frontend.address
start_no_frontend_volume(grpc_controller_no_frontend,
grpc_fixed_dir_replica1, grpc_fixed_dir_replica2)
cmd.backup_restore(dr_address, backup0)
wait_for_restore_completion(dr_address, backup0)
verify_no_frontend_data(0, snap0_data, grpc_controller_no_frontend)
# mock inc restore error: invalid block
delta_file = "volume-delta-" + backup0_name + ".img"
command = ["find", VFS_DIR, "-type", "d", "-name", VOLUME_NAME]
backup_volume_path = subprocess.check_output(command).strip()
command = ["find", backup_volume_path, "-name", "*blk"]
blocks = subprocess.check_output(command).split()
assert len(blocks) != 0
for blk in blocks:
command = ["mv", blk, blk + ".tmp".encode('utf-8')]
subprocess.check_output(command).strip()
cmd.backup_restore(dr_address, backup1)
# restore status should contain the error info
failed_restore, finished_restore = 0, 0
for i in range(RETRY_COUNTS):
failed_restore, finished_restore = 0, 0
rs = cmd.restore_status(dr_address)
for status in rs.values():
if status['backupURL'] != backup1:
break
if 'error' in status.keys():
if status['error'] != "":
assert 'no such file or directory' in \
status['error']
failed_restore += 1
if not status["isRestoring"]:
finished_restore += 1
if failed_restore == 2 and finished_restore == 2:
break
time.sleep(RETRY_INTERVAL)
assert failed_restore == 2 and finished_restore == 2
assert path.exists(FIXED_REPLICA_PATH1 + delta_file)
assert path.exists(FIXED_REPLICA_PATH2 + delta_file)
for blk in blocks:
command = ["mv", blk + ".tmp".encode('utf-8'), blk]
subprocess.check_output(command)
cleanup_no_frontend_volume(grpc_controller_no_frontend,
grpc_fixed_dir_replica1,
grpc_fixed_dir_replica2)
rm_backups(address, ENGINE_NAME, [backup0, backup1])
cmd.sync_agent_server_reset(address)
cmd.sync_agent_server_reset(dr_address)
cleanup_controller(grpc_controller)
cleanup_replica(grpc_replica1)
cleanup_replica(grpc_replica2)
def test_restore_with_rebuild(grpc_controller, grpc_replica1, grpc_replica2,
grpc_controller_no_frontend,
grpc_fixed_dir_replica1, grpc_fixed_dir_replica2,
backup_targets): # NOQA
# Pick up a random backup target.
backup_target = backup_targets[random.randint(0, 1)]
address = grpc_controller.address
dr_address = grpc_controller_no_frontend.address
try:
cmd.backup_volume_rm(address, VOLUME_NAME, backup_target)
except Exception:
pass
dev = get_dev(grpc_replica1, grpc_replica2, grpc_controller)
start_no_frontend_volume(grpc_controller_no_frontend,
grpc_fixed_dir_replica1)
data0_len = random_length(PAGE_SIZE)
data0 = Data(random.randrange(0, SIZE - 2 * PAGE_SIZE, PAGE_SIZE),
data0_len, random_string(data0_len))
snap0 = Snapshot(dev, data0, address)
backup0_info = create_backup(address, snap0.name, backup_target)
assert backup0_info["VolumeName"] == VOLUME_NAME
assert backup0_info["Size"] == str(BLOCK_SIZE)
cmd.backup_restore(dr_address, backup0_info["URL"])
wait_for_restore_completion(dr_address, backup0_info["URL"])
verify_no_frontend_data(data0.offset, data0.content,
grpc_controller_no_frontend)
open_replica(grpc_fixed_dir_replica2)
cmd.add_replica(dr_address, grpc_fixed_dir_replica2.url, True)
replicas = grpc_controller_no_frontend.replica_list()
assert len(replicas) == 2
rw_replica, wo_replica = 0, 0
for r in replicas:
if r.mode == 'RW':
rw_replica += 1
else:
assert r.mode == "WO"
wo_replica += 1
assert rw_replica == 1 and wo_replica == 1
# The old replica will fail the restore but the error won't be recorded.
# Then rebuilding replica will start full restore.
with pytest.raises(subprocess.CalledProcessError) as e:
cmd.backup_restore(dr_address, backup0_info["URL"])
assert "already restored backup" in e.value.stdout
wait_for_restore_completion(dr_address, backup0_info["URL"])
# Need to manually verify the rebuilding replica for the restore volume
cmd.verify_rebuild_replica(dr_address, grpc_fixed_dir_replica2.url)
replicas = grpc_controller_no_frontend.replica_list()
assert len(replicas) == 2
for r in replicas:
assert r.mode == 'RW'
# Delete the old replica then check if the rebuilt replica works fine.
cleanup_replica(grpc_fixed_dir_replica1)
grpc_controller_no_frontend.replica_delete(grpc_fixed_dir_replica1.address)
verify_no_frontend_data(data0.offset, data0.content,
grpc_controller_no_frontend)
cmd.backup_volume_rm(grpc_controller.address, VOLUME_NAME, backup_target)
def inc_restore_failure_cleanup_error_test(grpc_controller, grpc_replica1,
grpc_replica2, grpc_dr_controller,
grpc_dr_replica1, grpc_dr_replica2,
backup_target): # NOQA
address = grpc_controller.address
dev = get_dev(grpc_replica1, grpc_replica2, grpc_controller)
zero_string = b'\x00'.decode('utf-8')
length0 = 256
snap0_data = random_string(length0)
verify_data(dev, 0, snap0_data)
verify_data(dev, BLOCK_SIZE, snap0_data)
snap0 = cmd.snapshot_create(address)
backup0 = create_backup(address, snap0, backup_target)["URL"]
backup0_name = cmd.backup_inspect(address, backup0)['Name']
# backup1: 32 random data + 32 zero data + 192 random data in 1st block
length1 = 32
offset1 = 32
snap1_data = zero_string * length1
verify_data(dev, offset1, snap1_data)
snap1 = cmd.snapshot_create(address)
backup1 = create_backup(address, snap1, backup_target)["URL"]
# start dr volume (no frontend)
dr_address = grpc_dr_controller.address
start_no_frontend_volume(grpc_dr_controller, grpc_dr_replica1,
grpc_dr_replica2)
cmd.backup_restore(dr_address, backup0)
wait_for_restore_completion(dr_address, backup0)
verify_no_frontend_data(0, snap0_data, grpc_dr_controller)
# mock inc restore crash/error: cannot clean up the delta file path
delta_file = "volume-delta-" + backup0_name + ".img"
command = ["mkdir", "-p", FIXED_REPLICA_PATH1 + delta_file + "/dir"]
subprocess.check_output(command).strip()
command = ["mkdir", "-p", FIXED_REPLICA_PATH2 + delta_file + "/dir"]
subprocess.check_output(command).strip()
with pytest.raises(subprocess.CalledProcessError) as e:
cmd.backup_restore(dr_address, backup1)
assert "failed to clean up the existing file" in e.value.stdout
command = ["rm", "-r", FIXED_REPLICA_PATH1 + delta_file]
subprocess.check_output(command).strip()
command = ["rm", "-r", FIXED_REPLICA_PATH2 + delta_file]
subprocess.check_output(command).strip()
# the restore status will be reverted/keep unchanged
# if an error is triggered before the actual restore is performed
rs = cmd.restore_status(dr_address)
for status in rs.values():
assert not status["isRestoring"]
assert status['backupURL'] == backup0
assert 'error' not in status
assert status['progress'] == 100
assert status['state'] == "complete"
cleanup_no_frontend_volume(grpc_dr_controller, grpc_dr_replica1,
grpc_dr_replica2)
rm_backups(address, ENGINE_NAME, [backup0, backup1])
cmd.sync_agent_server_reset(address)
cmd.sync_agent_server_reset(dr_address)
cleanup_controller(grpc_controller)
cleanup_replica(grpc_replica1)
cleanup_replica(grpc_replica2)
def test_inc_restore_with_rebuild_and_expansion(grpc_controller, grpc_replica1,
grpc_replica2,
grpc_controller_no_frontend,
grpc_fixed_dir_replica1,
grpc_fixed_dir_replica2,
backup_targets): # NOQA
# Pick up a random backup target.
backup_target = backup_targets[random.randint(0, 1)]
address = grpc_controller.address
dr_address = grpc_controller_no_frontend.address
try:
cmd.backup_volume_rm(address, VOLUME_NAME, backup_target)
except Exception:
pass
dev = get_dev(grpc_replica1, grpc_replica2, grpc_controller)
start_no_frontend_volume(grpc_controller_no_frontend,
grpc_fixed_dir_replica1)
data0_len = random_length(PAGE_SIZE)
data0 = Data(random.randrange(0, SIZE - 2 * PAGE_SIZE, PAGE_SIZE),
data0_len, random_string(data0_len))
snap0 = Snapshot(dev, data0, address)
backup0_info = create_backup(address, snap0.name, backup_target)
assert backup0_info["VolumeName"] == VOLUME_NAME
assert backup0_info["Size"] == str(BLOCK_SIZE)
cmd.backup_restore(dr_address, backup0_info["URL"])
wait_for_restore_completion(dr_address, backup0_info["URL"])
verify_no_frontend_data(data0.offset, data0.content,
grpc_controller_no_frontend)
expand_volume_with_frontend(grpc_controller, EXPANDED_SIZE)
wait_and_check_volume_expansion(grpc_controller, EXPANDED_SIZE)
data1_len = random_length(PAGE_SIZE)
data1 = Data(random.randrange(SIZE, EXPANDED_SIZE - PAGE_SIZE, PAGE_SIZE),
data1_len, random_string(data1_len))
snap1 = Snapshot(dev, data1, address)
backup1_info = create_backup(address, snap1.name, backup_target,
EXPANDED_SIZE_STR)
assert backup1_info["VolumeName"] == VOLUME_NAME
assert backup1_info["Size"] == str(2 * BLOCK_SIZE)
backup_volumes = cmd.backup_volume_list(address, VOLUME_NAME,
backup_target)
assert VOLUME_NAME in backup_volumes
url = get_backup_volume_url(backup_target, VOLUME_NAME)
backup_info = cmd.backup_inspect_volume(address, url)
assert backup_info["Size"] == EXPANDED_SIZE_STR
# restore command invocation should error out
with pytest.raises(subprocess.CalledProcessError) as e:
cmd.backup_restore(dr_address, backup1_info["URL"])
assert "need to expand the DR volume" in e.value.stdout
# The above restore error is triggered before calling the replicas.
# Hence the error won't be recorded in the restore status
# and we can continue restoring backups for the DR volume.
rs = cmd.restore_status(dr_address)
for status in rs.values():
assert status['backupURL'] == backup0_info["URL"]
assert status['lastRestored'] == backup0_info["Name"]
assert 'error' not in status.keys()
assert not status["isRestoring"]
grpc_controller_no_frontend.volume_expand(EXPANDED_SIZE)
wait_for_volume_expansion(grpc_controller_no_frontend, EXPANDED_SIZE)
# This restore command will trigger snapshot purge.
# And the error is triggered before calling the replicas.
with pytest.raises(subprocess.CalledProcessError) as e:
cmd.backup_restore(dr_address, backup1_info["URL"])
assert "found more than 1 snapshot in the replicas, " \
"hence started to purge snapshots before the restore" \
in e.value.stdout
wait_for_purge_completion(dr_address)
snaps_info = cmd.snapshot_info(dr_address)
assert len(snaps_info) == 2
volume_head_name = "volume-head"
snap_name = "expand-" + EXPANDED_SIZE_STR
head_info = snaps_info[volume_head_name]
assert head_info["name"] == volume_head_name
assert head_info["parent"] == snap_name
assert not head_info["children"]
assert head_info["usercreated"] is False
snap_info = snaps_info[snap_name]
assert snap_info["name"] == snap_name
assert not snap_info["parent"]
assert volume_head_name in snap_info["children"]
assert snap_info["usercreated"] is False
cmd.backup_restore(dr_address, backup1_info["URL"])
wait_for_restore_completion(dr_address, backup1_info["URL"])
verify_no_frontend_data(data1.offset, data1.content,
grpc_controller_no_frontend)
# For DR volume, the rebuilding replica won't be expanded automatically.
open_replica(grpc_fixed_dir_replica2)
with pytest.raises(subprocess.CalledProcessError):
cmd.add_replica(dr_address, grpc_fixed_dir_replica2.url, True)
# Manually expand the rebuilding replica then retry `add-replica`.
grpc_fixed_dir_replica2.replica_open()
grpc_fixed_dir_replica2.replica_expand(EXPANDED_SIZE)
grpc_fixed_dir_replica2.replica_close()
cmd.add_replica(dr_address, grpc_fixed_dir_replica2.url, True)
replicas = grpc_controller_no_frontend.replica_list()
assert len(replicas) == 2
rw_replica, wo_replica = 0, 0
for r in replicas:
if r.mode == 'RW':
rw_replica += 1
else:
assert r.mode == "WO"
wo_replica += 1
assert rw_replica == 1 and wo_replica == 1
# The old replica will fail the restore but the error won't be recorded.
# Then rebuilding replica will start full restore.
with pytest.raises(subprocess.CalledProcessError) as e:
cmd.backup_restore(dr_address, backup1_info["URL"])
assert "already restored backup" in e.value.stdout
wait_for_restore_completion(dr_address, backup1_info["URL"])
cmd.verify_rebuild_replica(dr_address, grpc_fixed_dir_replica2.url)
replicas = grpc_controller_no_frontend.replica_list()
assert len(replicas) == 2
for r in replicas:
assert r.mode == 'RW'
verify_no_frontend_data(data1.offset, data1.content,
grpc_controller_no_frontend)
cmd.backup_volume_rm(grpc_controller.address, VOLUME_NAME, backup_target)
def restore_inc_test(grpc_controller, grpc_replica1, grpc_replica2,
grpc_dr_controller, grpc_dr_replica1, grpc_dr_replica2,
backup_target): # NOQA
address = grpc_controller.address
dev = get_dev(grpc_replica1, grpc_replica2, grpc_controller)
zero_string = b'\x00'.decode('utf-8')
# backup0: 256 random data in 1st block
length0 = 256
snap0_data = random_string(length0)
verify_data(dev, 0, snap0_data)
verify_data(dev, BLOCK_SIZE, snap0_data)
snap0 = cmd.snapshot_create(address)
backup0 = create_backup(address, snap0, backup_target)["URL"]
backup0_name = cmd.backup_inspect(address, backup0)['Name']
# backup1: 32 random data + 32 zero data + 192 random data in 1st block
length1 = 32
offset1 = 32
snap1_data = zero_string * length1
verify_data(dev, offset1, snap1_data)
snap1 = cmd.snapshot_create(address)
backup1 = create_backup(address, snap1, backup_target)["URL"]
backup1_name = cmd.backup_inspect(address, backup1)['Name']
# backup2: 32 random data + 256 random data in 1st block,
# 256 random data in 2nd block
length2 = 256
offset2 = 32
snap2_data = random_string(length2)
verify_data(dev, offset2, snap2_data)
verify_data(dev, BLOCK_SIZE, snap2_data)
snap2 = cmd.snapshot_create(address)
backup2 = create_backup(address, snap2, backup_target)["URL"]
backup2_name = cmd.backup_inspect(address, backup2)['Name']
# backup3: 64 zero data + 192 random data in 1st block
length3 = 64
offset3 = 0
verify_data(dev, offset3, zero_string * length3)
verify_data(dev, length2, zero_string * offset2)
verify_data(dev, BLOCK_SIZE, zero_string * length2)
snap3 = cmd.snapshot_create(address)
backup3 = create_backup(address, snap3, backup_target)["URL"]
backup3_name = cmd.backup_inspect(address, backup3)['Name']
# backup4: 256 random data in 1st block
length4 = 256
offset4 = 0
snap4_data = random_string(length4)
verify_data(dev, offset4, snap4_data)
snap4 = cmd.snapshot_create(address)
backup4 = create_backup(address, snap4, backup_target)["URL"]
backup4_name = cmd.backup_inspect(address, backup4)['Name']
# start no-frontend volume
# start dr volume (no frontend)
dr_address = grpc_dr_controller.address
start_no_frontend_volume(grpc_dr_controller, grpc_dr_replica1,
grpc_dr_replica2)
# mock restore crash/error:
# By adding attribute `immutable`, Longhorn cannot create a file
# for the restore. Then the following restore command will fail.
command = ["chattr", "+i", FIXED_REPLICA_PATH1]
subprocess.check_output(command).strip()
command = ["chattr", "+i", FIXED_REPLICA_PATH2]
subprocess.check_output(command).strip()
with pytest.raises(subprocess.CalledProcessError) as e:
cmd.backup_restore(dr_address, backup0)
assert "operation not permitted" in e.value.stdout
# the restore status will be reverted/keep unchanged
# if an error is triggered before the actual restore is performed
rs = cmd.restore_status(dr_address)
for status in rs.values():
assert not status["isRestoring"]
assert not status['backupURL']
assert 'error' not in status
assert 'progress' not in status
assert not status['state']
command = ["chattr", "-i", FIXED_REPLICA_PATH1]
subprocess.check_output(command).strip()
command = ["chattr", "-i", FIXED_REPLICA_PATH2]
subprocess.check_output(command).strip()
cmd.sync_agent_server_reset(dr_address)
cmd.backup_restore(dr_address, backup0)
wait_for_restore_completion(dr_address, backup0)
verify_no_frontend_data(0, snap0_data, grpc_dr_controller)
data1 = \
snap0_data[0:offset1] + snap1_data + \
snap0_data[offset1+length1:]
cmd.backup_restore(dr_address, backup1)
wait_for_restore_completion(dr_address, backup1)
verify_no_frontend_data(0, data1, grpc_dr_controller)
delta_file1 = "volume-delta-" + backup0_name + ".img"
assert not path.exists(FIXED_REPLICA_PATH1 + delta_file1)
assert not path.exists(FIXED_REPLICA_PATH2 + delta_file1)
status = cmd.restore_status(dr_address)
compare_last_restored_with_backup(status, backup1_name)
data2 = \
data1[0:offset2] + snap2_data + \
zero_string * (BLOCK_SIZE - length2 - offset2) + snap2_data
cmd.backup_restore(dr_address, backup2)
wait_for_restore_completion(dr_address, backup2)
verify_no_frontend_data(0, data2, grpc_dr_controller)
delta_file2 = "volume-delta-" + backup1_name + ".img"
assert not path.exists(FIXED_REPLICA_PATH1 + delta_file2)
assert not path.exists(FIXED_REPLICA_PATH2 + delta_file2)
status = cmd.restore_status(dr_address)
compare_last_restored_with_backup(status, backup2_name)
# mock race condition: duplicate inc restore calls
with pytest.raises(subprocess.CalledProcessError) as e:
cmd.backup_restore(dr_address, backup2)
wait_for_restore_completion(dr_address, backup2)
assert "already restored backup" in e.value.stdout
data3 = zero_string * length3 + data2[length3:length2]
cmd.backup_restore(dr_address, backup3)
wait_for_restore_completion(dr_address, backup3)
verify_no_frontend_data(0, data3, grpc_dr_controller)
delta_file3 = "volume-delta-" + backup3_name + ".img"
assert not path.exists(FIXED_REPLICA_PATH1 + delta_file3)
assert not path.exists(FIXED_REPLICA_PATH2 + delta_file3)
status = cmd.restore_status(dr_address)
compare_last_restored_with_backup(status, backup3_name)
# mock corner case: invalid last-restored backup
rm_backups(address, ENGINE_NAME, [backup3])
# This inc restore will fall back to full restore
cmd.backup_restore(dr_address, backup4)
wait_for_restore_completion(dr_address, backup4)
verify_no_frontend_data(0, snap4_data, grpc_dr_controller)
status = cmd.restore_status(dr_address)
compare_last_restored_with_backup(status, backup4_name)
# check if the tmp files during this special full restore are cleaned up.
if "vfs" in backup_target:
command = ["find", VFS_DIR, "-type", "d", "-name", VOLUME_NAME]
backup_volume_path = subprocess.check_output(command).strip()
command = ["find", backup_volume_path, "-name", "*snap_tmp"]
tmp_files = subprocess.check_output(command).split()
assert len(tmp_files) == 0
cleanup_no_frontend_volume(grpc_dr_controller, grpc_dr_replica1,
grpc_dr_replica2)
rm_backups(address, ENGINE_NAME, [backup0, backup1, backup2, backup4])
cmd.sync_agent_server_reset(address)
cmd.sync_agent_server_reset(dr_address)
cleanup_controller(grpc_controller)
cleanup_replica(grpc_replica1)
cleanup_replica(grpc_replica2)
def restore_inc_test(
grpc_engine_manager, # NOQA
grpc_controller, # NOQA
grpc_replica1,
grpc_replica2, # NOQA
grpc_dr_controller, # NOQA
grpc_dr_replica1,
grpc_dr_replica2, # NOQA
backup_target): # NOQA
address = grpc_controller.address
dev = get_dev(grpc_replica1, grpc_replica2, grpc_controller)
zero_string = b'\x00'.decode('utf-8')
# backup0: 256 random data in 1st block
length0 = 256
snap0_data = random_string(length0)
verify_data(dev, 0, snap0_data)
verify_data(dev, BLOCK_SIZE, snap0_data)
snap0 = cmd.snapshot_create(address)
backup0 = create_backup(address, snap0, backup_target)["URL"]
backup0_name = cmd.backup_inspect(address, backup0)['Name']
# backup1: 32 random data + 32 zero data + 192 random data in 1st block
length1 = 32
offset1 = 32
snap1_data = zero_string * length1
verify_data(dev, offset1, snap1_data)
snap1 = cmd.snapshot_create(address)
backup1 = create_backup(address, snap1, backup_target)["URL"]
backup1_name = cmd.backup_inspect(address, backup1)['Name']
# backup2: 32 random data + 256 random data in 1st block,
# 256 random data in 2nd block
length2 = 256
offset2 = 32
snap2_data = random_string(length2)
verify_data(dev, offset2, snap2_data)
verify_data(dev, BLOCK_SIZE, snap2_data)
snap2 = cmd.snapshot_create(address)
backup2 = create_backup(address, snap2, backup_target)["URL"]
backup2_name = cmd.backup_inspect(address, backup2)['Name']
# backup3: 64 zero data + 192 random data in 1st block
length3 = 64
offset3 = 0
verify_data(dev, offset3, zero_string * length3)
verify_data(dev, length2, zero_string * offset2)
verify_data(dev, BLOCK_SIZE, zero_string * length2)
snap3 = cmd.snapshot_create(address)
backup3 = create_backup(address, snap3, backup_target)["URL"]
backup3_name = cmd.backup_inspect(address, backup3)['Name']
# backup4: 256 random data in 1st block
length4 = 256
offset4 = 0
snap4_data = random_string(length4)
verify_data(dev, offset4, snap4_data)
snap4 = cmd.snapshot_create(address)
backup4 = create_backup(address, snap4, backup_target)["URL"]
backup4_name = cmd.backup_inspect(address, backup4)['Name']
# start no-frontend volume
# start dr volume (no frontend)
dr_address = grpc_dr_controller.address
start_no_frontend_volume(grpc_engine_manager, grpc_dr_controller,
grpc_dr_replica1, grpc_dr_replica2)
# mock restore crash/error:
# By adding attribute `immutable`, Longhorn cannot create a file
# for the restore. Then the following restore command will fail.
command = ["chattr", "+i", FIXED_REPLICA_PATH1]
subprocess.check_output(command).strip()
command = ["chattr", "+i", FIXED_REPLICA_PATH2]
subprocess.check_output(command).strip()
with pytest.raises(subprocess.CalledProcessError) as e:
cmd.backup_restore(dr_address, backup0)
assert "operation not permitted" in e.value.stdout
command = ["chattr", "-i", FIXED_REPLICA_PATH1]
subprocess.check_output(command).strip()
command = ["chattr", "-i", FIXED_REPLICA_PATH2]
subprocess.check_output(command).strip()
cmd.backup_restore(dr_address, backup0)
wait_for_restore_completion(dr_address, backup0)
verify_no_frontend_data(grpc_engine_manager, 0, snap0_data,
grpc_dr_controller)
delta_file1 = "volume-delta-" + backup0_name + ".img"
# mock inc restore crash/error: cannot clean up the delta file path
command = ["mkdir", "-p", FIXED_REPLICA_PATH1 + delta_file1 + "/dir"]
subprocess.check_output(command).strip()
command = ["mkdir", "-p", FIXED_REPLICA_PATH2 + delta_file1 + "/dir"]
subprocess.check_output(command).strip()
with pytest.raises(subprocess.CalledProcessError):
cmd.restore_inc(dr_address, backup1, backup0_name)
command = ["rm", "-r", FIXED_REPLICA_PATH1 + delta_file1]
subprocess.check_output(command).strip()
command = ["rm", "-r", FIXED_REPLICA_PATH2 + delta_file1]
subprocess.check_output(command).strip()
if "vfs" in backup_target:
# restore status should contain the error info
failed_restore, finished_restore = 0, 0
for i in range(RETRY_COUNTS):
failed_restore, finished_restore = 0, 0
rs = cmd.restore_status(dr_address)
for status in rs.values():
if status['backupURL'] != backup1:
break
if 'error' in status.keys():
if status['error'] != "":
assert 'failed to clean up the existing file' in\
status['error']
failed_restore += 1
if not status["isRestoring"]:
finished_restore += 1
if failed_restore == 2 and finished_restore == 2:
break
time.sleep(RETRY_INTERVAL)
assert failed_restore == 2 and finished_restore == 2
# mock inc restore error: invalid block
command = ["find", VFS_DIR, "-type", "d", "-name", VOLUME_NAME]
backup_volume_path = subprocess.check_output(command).strip()
command = ["find", backup_volume_path, "-name", "*blk"]
blocks = subprocess.check_output(command).split()
assert len(blocks) != 0
for blk in blocks:
command = ["mv", blk, blk + ".tmp".encode('utf-8')]
subprocess.check_output(command).strip()
cmd.restore_inc(dr_address, backup1, backup0_name)
# restore status should contain the error info
failed_restore, finished_restore = 0, 0
for i in range(RETRY_COUNTS):
failed_restore, finished_restore = 0, 0
rs = cmd.restore_status(dr_address)
for status in rs.values():
if status['backupURL'] != backup1:
break
if 'error' in status.keys():
if status['error'] != "":
assert 'no such file or directory' in \
status['error']
failed_restore += 1
if not status["isRestoring"]:
finished_restore += 1
if failed_restore == 2 and finished_restore == 2:
break
time.sleep(RETRY_INTERVAL)
assert failed_restore == 2 and finished_restore == 2
assert path.exists(FIXED_REPLICA_PATH1 + delta_file1)
assert path.exists(FIXED_REPLICA_PATH2 + delta_file1)
for blk in blocks:
command = ["mv", blk + ".tmp".encode('utf-8'), blk]
subprocess.check_output(command)
data1 = \
snap0_data[0:offset1] + snap1_data + \
snap0_data[offset1+length1:]
restore_incrementally(dr_address, backup1, backup0_name)
verify_no_frontend_data(grpc_engine_manager, 0, data1, grpc_dr_controller)
assert not path.exists(FIXED_REPLICA_PATH1 + delta_file1)
assert not path.exists(FIXED_REPLICA_PATH2 + delta_file1)
status = cmd.restore_status(dr_address)
compare_last_restored_with_backup(status, backup1_name)
data2 = \
data1[0:offset2] + snap2_data + \
zero_string * (BLOCK_SIZE - length2 - offset2) + snap2_data
restore_incrementally(dr_address, backup2, backup1_name)
verify_no_frontend_data(grpc_engine_manager, 0, data2, grpc_dr_controller)
delta_file2 = "volume-delta-" + backup1_name + ".img"
assert not path.exists(FIXED_REPLICA_PATH1 + delta_file2)
assert not path.exists(FIXED_REPLICA_PATH2 + delta_file2)
status = cmd.restore_status(dr_address)
compare_last_restored_with_backup(status, backup2_name)
# mock race condition
with pytest.raises(subprocess.CalledProcessError) as e:
restore_incrementally(dr_address, backup1, backup0_name)
assert "doesn't match field LastRestored" in e.value.stdout
data3 = zero_string * length3 + data2[length3:length2]
restore_incrementally(dr_address, backup3, backup2_name)
verify_no_frontend_data(grpc_engine_manager, 0, data3, grpc_dr_controller)
delta_file3 = "volume-delta-" + backup3_name + ".img"
assert not path.exists(FIXED_REPLICA_PATH1 + delta_file3)
assert not path.exists(FIXED_REPLICA_PATH2 + delta_file3)
status = cmd.restore_status(dr_address)
compare_last_restored_with_backup(status, backup3_name)
# mock corner case: invalid last-restored backup
rm_backups(address, ENGINE_NAME, [backup3])
# actually it is full restoration
restore_incrementally(dr_address, backup4, backup3_name)
verify_no_frontend_data(grpc_engine_manager, 0, snap4_data,
grpc_dr_controller)
status = cmd.restore_status(dr_address)
compare_last_restored_with_backup(status, backup4_name)
if "vfs" in backup_target:
command = ["find", VFS_DIR, "-type", "d", "-name", VOLUME_NAME]
backup_volume_path = subprocess.check_output(command).strip()
command = ["find", backup_volume_path, "-name", "*tempoary"]
tmp_files = subprocess.check_output(command).split()
assert len(tmp_files) == 0
cleanup_no_frontend_volume(grpc_engine_manager, grpc_dr_controller,
grpc_dr_replica1, grpc_dr_replica2)
rm_backups(address, ENGINE_NAME, [backup0, backup1, backup2, backup4])
cmd.sync_agent_server_reset(address)
cleanup_controller(grpc_controller)
cleanup_replica(grpc_replica1)
cleanup_replica(grpc_replica2)
def volume_expansion_with_backup_test(
grpc_engine_manager, # NOQA
grpc_controller, # NOQA
grpc_dr_controller, # NOQA
grpc_replica1,
grpc_replica2, # NOQA
grpc_dr_replica1, # NOQA
grpc_dr_replica2, # NOQA
volume_name,
engine_name,
backup_target): # NOQA
address = grpc_controller.address
dr_address = grpc_dr_controller.address
dev = get_dev(grpc_replica1, grpc_replica2, grpc_controller)
start_no_frontend_volume(grpc_engine_manager, grpc_dr_controller,
grpc_dr_replica1, grpc_dr_replica2)
try:
cmd.backup_volume_rm(address, volume_name, backup_target)
except Exception:
pass
data0_len = random_length(PAGE_SIZE)
data0 = Data(random.randrange(0, SIZE - 2 * PAGE_SIZE, PAGE_SIZE),
data0_len, random_string(data0_len))
snap0 = Snapshot(dev, data0, address)
backup0_info = create_backup(address, snap0.name, backup_target)
assert backup0_info["VolumeName"] == volume_name
assert backup0_info["Size"] == str(BLOCK_SIZE)
cmd.backup_restore(dr_address, backup0_info["URL"])
wait_for_restore_completion(dr_address, backup0_info["URL"])
verify_no_frontend_data(grpc_engine_manager, data0.offset, data0.content,
grpc_dr_controller)
expand_volume_with_frontend(grpc_controller, EXPANDED_SIZE)
wait_and_check_volume_expansion(grpc_controller, EXPANDED_SIZE)
data1_len = random_length(PAGE_SIZE)
data1 = Data(random.randrange(SIZE, EXPANDED_SIZE - PAGE_SIZE, PAGE_SIZE),
data1_len, random_string(data1_len))
snap1 = Snapshot(dev, data1, address)
backup1_info = create_backup(address, snap1.name, backup_target,
EXPANDED_SIZE_STR)
assert backup1_info["VolumeName"] == volume_name
assert backup1_info["Size"] == str(2 * BLOCK_SIZE)
backup_volumes = cmd.backup_volume_list(address, volume_name,
backup_target)
assert volume_name in backup_volumes
assert backup_volumes[volume_name]["Size"] == EXPANDED_SIZE_STR
# incremental restoration will implicitly expand the volume first
restore_incrementally(dr_address, backup1_info["URL"],
backup0_info["Name"])
check_dr_volume_block_device_size(grpc_engine_manager, grpc_dr_controller,
EXPANDED_SIZE)
verify_no_frontend_data(grpc_engine_manager, data1.offset, data1.content,
grpc_dr_controller)
cmd.backup_volume_rm(grpc_controller.address, volume_name, backup_target)
def restore_inc_test(grpc_engine_manager, # NOQA
grpc_controller, # NOQA
grpc_replica1, grpc_replica2, # NOQA
grpc_dr_controller, # NOQA
grpc_dr_replica1, grpc_dr_replica2, # NOQA
backup_target): # NOQA
address = grpc_controller.address
dev = get_dev(grpc_replica1, grpc_replica2, grpc_controller)
zero_string = b'\x00'.decode('utf-8')
# backup0: 256 random data in 1st block
length0 = 256
snap0_data = random_string(length0)
verify_data(dev, 0, snap0_data)
verify_data(dev, BLOCK_SIZE, snap0_data)
snap0 = cmd.snapshot_create(address)
backup0 = create_backup(address, snap0, backup_target)["URL"]
backup0_name = cmd.backup_inspect(address, backup0)['Name']
# backup1: 32 random data + 32 zero data + 192 random data in 1st block
length1 = 32
offset1 = 32
snap1_data = zero_string * length1
verify_data(dev, offset1, snap1_data)
snap1 = cmd.snapshot_create(address)
backup1 = create_backup(address, snap1, backup_target)["URL"]
backup1_name = cmd.backup_inspect(address, backup1)['Name']
# backup2: 32 random data + 256 random data in 1st block,
# 256 random data in 2nd block
length2 = 256
offset2 = 32
snap2_data = random_string(length2)
verify_data(dev, offset2, snap2_data)
verify_data(dev, BLOCK_SIZE, snap2_data)
snap2 = cmd.snapshot_create(address)
backup2 = create_backup(address, snap2, backup_target)["URL"]
backup2_name = cmd.backup_inspect(address, backup2)['Name']
# backup3: 64 zero data + 192 random data in 1st block
length3 = 64
offset3 = 0
verify_data(dev, offset3, zero_string * length3)
verify_data(dev, length2, zero_string * offset2)
verify_data(dev, BLOCK_SIZE, zero_string * length2)
snap3 = cmd.snapshot_create(address)
backup3 = create_backup(address, snap3, backup_target)["URL"]
backup3_name = cmd.backup_inspect(address, backup3)['Name']
# backup4: 256 random data in 1st block
length4 = 256
offset4 = 0
snap4_data = random_string(length4)
verify_data(dev, offset4, snap4_data)
snap4 = cmd.snapshot_create(address)
backup4 = create_backup(address, snap4, backup_target)["URL"]
backup4_name = cmd.backup_inspect(address, backup4)['Name']
# start no-frontend volume
# start dr volume (no frontend)
dr_address = grpc_dr_controller.address
start_no_frontend_volume(grpc_engine_manager,
grpc_dr_controller,
grpc_dr_replica1, grpc_dr_replica2)
cmd.backup_restore(dr_address, backup0)
wait_for_restore_completion(dr_address, backup0)
verify_no_frontend_data(grpc_engine_manager,
0, snap0_data, grpc_dr_controller)
# mock restore crash/error
delta_file1 = "volume-delta-" + backup0_name + ".img"
if "vfs" in backup_target:
command = ["find", VFS_DIR, "-type", "d", "-name", VOLUME_NAME]
backup_volume_path = subprocess.check_output(command).strip()
command = ["find", backup_volume_path, "-name", "*blk"]
blocks = subprocess.check_output(command).split()
assert len(blocks) != 0
for blk in blocks:
command = ["mv", blk, blk+".tmp".encode('utf-8')]
subprocess.check_output(command).strip()
# should fail
is_failed = False
cmd.restore_inc(dr_address, backup1, backup0_name)
for i in range(RETRY_COUNTS):
rs = cmd.restore_status(dr_address)
for status in rs.values():
if status['backupURL'] != backup1:
break
if 'error' in status.keys():
if status['error'] != "":
assert 'no such file or directory' in \
status['error']
is_failed = True
if is_failed:
break
time.sleep(RETRY_INTERVAL)
assert is_failed
assert path.exists(FIXED_REPLICA_PATH1 + delta_file1)
assert path.exists(FIXED_REPLICA_PATH2 + delta_file1)
for blk in blocks:
command = ["mv", blk+".tmp".encode('utf-8'), blk]
subprocess.check_output(command)
data1 = \
snap0_data[0:offset1] + snap1_data + \
snap0_data[offset1+length1:]
# race condition: last restoration has failed
# but `isRestoring` hasn't been cleanup
for i in range(RETRY_COUNTS):
try:
restore_incrementally(dr_address, backup1, backup0_name)
break
except subprocess.CalledProcessError as e:
if "already in progress" not in e.output:
time.sleep(RETRY_INTERVAL)
else:
raise e
verify_no_frontend_data(grpc_engine_manager,
0, data1, grpc_dr_controller)
assert not path.exists(FIXED_REPLICA_PATH1 + delta_file1)
assert not path.exists(FIXED_REPLICA_PATH2 + delta_file1)
status = cmd.restore_status(dr_address)
compare_last_restored_with_backup(status, backup1_name)
data2 = \
data1[0:offset2] + snap2_data + \
zero_string * (BLOCK_SIZE - length2 - offset2) + snap2_data
restore_incrementally(dr_address, backup2, backup1_name)
verify_no_frontend_data(grpc_engine_manager,
0, data2, grpc_dr_controller)
delta_file2 = "volume-delta-" + backup1_name + ".img"
assert not path.exists(FIXED_REPLICA_PATH1 + delta_file2)
assert not path.exists(FIXED_REPLICA_PATH2 + delta_file2)
status = cmd.restore_status(dr_address)
compare_last_restored_with_backup(status, backup2_name)
# mock race condition
with pytest.raises(subprocess.CalledProcessError) as e:
restore_incrementally(dr_address, backup1, backup0_name)
assert "doesn't match lastRestored" in e
data3 = zero_string * length3 + data2[length3:length2]
restore_incrementally(dr_address, backup3, backup2_name)
verify_no_frontend_data(grpc_engine_manager,
0, data3, grpc_dr_controller)
delta_file3 = "volume-delta-" + backup3_name + ".img"
assert not path.exists(FIXED_REPLICA_PATH1 + delta_file3)
assert not path.exists(FIXED_REPLICA_PATH2 + delta_file3)
status = cmd.restore_status(dr_address)
compare_last_restored_with_backup(status, backup3_name)
# mock corner case: invalid last-restored backup
rm_backups(address, ENGINE_NAME, [backup3])
# actually it is full restoration
restore_incrementally(dr_address, backup4, backup3_name)
verify_no_frontend_data(grpc_engine_manager,
0, snap4_data, grpc_dr_controller)
status = cmd.restore_status(dr_address)
compare_last_restored_with_backup(status, backup4_name)
if "vfs" in backup_target:
command = ["find", VFS_DIR, "-type", "d", "-name", VOLUME_NAME]
backup_volume_path = subprocess.check_output(command).strip()
command = ["find", backup_volume_path, "-name", "*tempoary"]
tmp_files = subprocess.check_output(command).split()
assert len(tmp_files) == 0
cleanup_no_frontend_volume(grpc_engine_manager,
grpc_dr_controller,
grpc_dr_replica1, grpc_dr_replica2)
rm_backups(address, ENGINE_NAME, [backup0, backup1, backup2, backup4])
cmd.sync_agent_server_reset(address)
cleanup_controller(grpc_controller)
cleanup_replica(grpc_replica1)
cleanup_replica(grpc_replica2)
