def run(self):
# load the configuration
abspath = path.abspath(path.join(path.dirname(__file__), path.pardir))
configfile = abspath + '/conf/smsgw.conf'
gammucfg = abspath + '/conf/gammu.conf'
cfg = SmsConfig(configfile)
pidglobals.pidid = cfg.getvalue('pidid', 'pid-dummy', 'pid')
smsgwglobals.pidlogger.debug("PisID: " + pidglobals.pidid)
# Gammu Debug on/off
gammudebug = cfg.getvalue('gammudebug', 'Off', 'pid')
if gammudebug == "On":
pidglobals.gammudebug = True
todir = cfg.getvalue('logdirectory', abspath + '/logs/', 'pid')
tofile = cfg.getvalue('gammudebugfile', 'gammu.log', 'pid')
gammudebugfile = todir + tofile
pidglobals.gammudebugfile = gammudebugfile
smsgwglobals.pidlogger.debug("Gammu Debug on! Will log to " +
str(pidglobals.gammudebugfile))
else:
pidglobals.gammudebug = False
# Wrapping Gammu or not
wrapgammu = cfg.getvalue('wrapgammu', 'Off', 'pid')
if wrapgammu == "On":
pidglobals.wrapgammu = True
gammucmd = cfg.getvalue('gammucmd', 'Blank', 'pid')
smsgwglobals.pidlogger.debug("Gammucmd: " + str(gammucmd))
if gammucmd == "Blank":
option = "gammucmd - is not set!"
cfg.errorandexit(option)
if path.isfile(gammucmd) or path.islink(gammucmd):
# file or link exists all fine
pidglobals.gammucmd = gammucmd
else:
# exit PID here as not Modem connection will work!
option = "gammucmd - Command given not found!"
cfg.errorandexit(option)
else:
pidglobals.wrapgammu = False
smsgwglobals.pidlogger.debug("WrapGammu: " +
str(pidglobals.wrapgammu))
testmode = cfg.getvalue('testmode', 'Off', 'pid')
if testmode == "On":
# set testmode - content "ERROR" "SUCCESS" and "LONGWAIT" is
# handled in a special way now
pidglobals.testmode = True
else:
pidglobals.testmode = False
smsgwglobals.pidlogger.debug("TestMode: " +
str(pidglobals.testmode))
retrypisurl = cfg.getvalue('retrypisurl', '2', 'pid')
smsgwglobals.pidlogger.debug(pidglobals.pidid + ": " +
"RetryPisUrl: " + retrypisurl)
retrywait = cfg.getvalue('retrywait', '5', 'pid')
smsgwglobals.pidlogger.debug(pidglobals.pidid + ": " +
"RetryWait: " + retrywait)
modemcfg = cfg.getvalue('modemlist', '[{}]', 'pid')
try:
# convert json to list of dictionary entries
modemlist = json.loads(modemcfg)
except:
cfg.errorandexit("modemlist - not a valid JSON structure!")
# check if modemcfg is set
if 'modemid' not in modemlist[0]:
# if len(modemlist) == 0:
cfg.errorandexit("modemlist - not set!!!")
else:
# validate modem settings
for modem in modemlist:
try:
re.compile(modem['regex'])
except:
cfg.errorandexit("modemlist - at " + modem['modemid'] +
" - invalid regex!")
# connect to USBModems and persist in pidglobals
Modem.connectmodems(modemlist, gammucfg)
smsgwglobals.pidlogger.debug(pidglobals.pidid + ": " +
"ModemList: " +
str(pidglobals.modemlist))
if len(pidglobals.modemlist) == 0:
errortext = "at any configured modem."
cfg.errorandexit(errortext, 2)
pisurlcfg = cfg.getvalue('pisurllist',
'[{"url": "ws://127.0.0.1:7788"}]',
'pid')
# convert json to list of dictionary entries
pisurllist = json.loads(pisurlcfg)
smsgwglobals.pidlogger.debug(pidglobals.pidid + ": " +
"PisUrlList: " +
str(pisurllist))
# endless try to connect to configured PIS
# error: wait for some secs, then 1 retry, then next PID in list
curpis = 0
tries = 1
while True:
try:
if pidglobals.closingcode:
raise
baseurl = pisurllist[curpis]['url']
pisurl = baseurl + "/ws"
smsgwglobals.pidlogger.info(pidglobals.pidid + ": " +
"Try " + str(tries) + ": " +
"Connecting to: " +
pisurl)
# init websocket client with heartbeat, 30 is fixed in all
# modules wis/pis/pid
ws = PidWsClient(pisurl,
protocols=['http-only', 'chat'],
heartbeat_freq=30)
ws.connect()
# set values for primary check in Websocket connection!
# trim ws out of ws:/.. and add http:/
pidglobals.curpisurl = "http" + baseurl[2:]
pidglobals.primpisurl = "http" + pisurllist[0]['url'][2:]
ws.run_forever()
except KeyboardInterrupt:
ws.close()
# leave while loop
break
except Exception as e:
# do retry except there is no more modem to communicate
if (pidglobals.closingcode is None or
pidglobals.closingcode < 4000):
# try to reconnect
smsgwglobals.pidlogger.info(pidglobals.pidid + ": " +
"Got a problem will reconnect "
"in " + retrywait + " seconds.")
smsgwglobals.pidlogger.debug(pidglobals.pidid + ": " +
"Problem is: " + str(e))
try:
time.sleep(int(retrywait))
except:
break
if tries < int(retrypisurl):
tries = tries + 1
else:
tries = 1
curpis = curpis + 1
if curpis == len(pisurllist):
curpis = 0
pidglobals.closingcode = None
elif pidglobals.closingcode == 4001:
# go back to inital PID
# reset while parameter for pis and retries
smsgwglobals.pidlogger.info(pidglobals.pidid + ": " +
"Going back to Prim PID")
curpis = 0
tries = 1
pidglobals.closingcode = None
elif pidglobals.closingcode == 4000:
# leave while loop
# no connection to modem found!
break
class SmsLogger(object):
"""Base class for Log handling. Creates a log-handler for each section
in config file.
Attributes:
configfile -- absolut path to configuration file
to read relevant optionsi out of all sections..
loglevel = CRITICAL | ERROR | WARNING | INFO | DEBUG
logdirectory = absolut path to log directory
fallback is local \logs directory
logfile = smsgw.log
"""
__smsconfig = None
__abspath = path.abspath(path.join(path.dirname(__file__), path.pardir))
# Constructor
def __init__(self, configfile=__abspath + '/conf/smsgw.conf'):
# read SmsConfigs
self.__smsconfig = SmsConfig(configfile)
sections = self.__smsconfig.getsections()
# print (type(sections))
# print (sections)
# prepare inital logger for each section in config file
for section in sections:
# print (section)
# configer logger per section
# handler values are -> 'console'
# -> 'file'
self.addHandler(section, 'console')
self.addHandler(section, 'file')
def addHandler(self, section, forhandler='console'):
# set logger per section
smslogger = logging.getLogger(section)
# prepare format
logFormatter = logging.Formatter("%(asctime)s [%(name)s:%(levelname)-5.5s] %(message)s")
# choose the right handler
if forhandler == 'file':
todir = self.__smsconfig.getvalue('logdirectory', self.__abspath + '/logs/', section)
fbacktofile = section + '.log'
tofile = self.__smsconfig.getvalue('logfile', fbacktofile, section)
logfile = todir + tofile
daysback = int(self.__smsconfig.getvalue('logfiledaysback', 7, section))
handler = logging.handlers.TimedRotatingFileHandler(logfile,
when='midnight',
backupCount=daysback,
encoding='utf-8',
utc=True)
# handler = logging.FileHandler(logfile, 'a', 'utf-8')
# double ensure that default handler is StreamHandler
else:
handler = logging.StreamHandler()
# set the format to the Handler
handler.setFormatter(logFormatter)
# add handler
smslogger.addHandler(handler)
# set log level
loglevel = self.__smsconfig.getvalue('loglevel', 'WARNING', section)
try:
nummeric_level = getattr(logging, loglevel)
smslogger.setLevel(nummeric_level)
smslogger.debug('addHandler for (%s) handler (%s) done!', section, forhandler)
except Exception:
self.__smsconfig.errorandexit('loglevel')
def run(self):
# load the configuration
abspath = path.abspath(path.join(path.dirname(__file__), path.pardir))
pid_env_config_id = os.getenv("PID_ID")
configfile = abspath + '/conf/smsgw_' + str(pid_env_config_id) + '.conf' if pid_env_config_id else '/conf/smsgw.conf'
cfg = SmsConfig(configfile)
smsgwglobals.pidlogger.debug("PID Env ID: " + str(pid_env_config_id))
smsgwglobals.pidlogger.debug("PID Config file: " + configfile)
pidglobals.pidid = cfg.getvalue('pidid', 'pid-dummy', 'pid')
smsgwglobals.pidlogger.debug("PidID: " + pidglobals.pidid)
# Gammu Debug on/off
gammudebug = cfg.getvalue('gammudebug', 'Off', 'pid')
if gammudebug == "On":
pidglobals.gammudebug = True
todir = cfg.getvalue('logdirectory', abspath + '/logs/', 'pid')
tofile = cfg.getvalue('gammudebugfile', 'gammu.log', 'pid')
gammudebugfile = todir + tofile
pidglobals.gammudebugfile = gammudebugfile
smsgwglobals.pidlogger.debug("Gammu Debug on! Will log to " +
str(pidglobals.gammudebugfile))
else:
pidglobals.gammudebug = False
# Wrapping Gammu or not
wrapgammu = cfg.getvalue('wrapgammu', 'Off', 'pid')
if wrapgammu == "On":
pidglobals.wrapgammu = True
gammucmd = cfg.getvalue('gammucmd', 'Blank', 'pid')
smsgwglobals.pidlogger.debug("Gammucmd: " + str(gammucmd))
if gammucmd == "Blank":
option = "gammucmd - is not set!"
cfg.errorandexit(option)
if path.isfile(gammucmd) or path.islink(gammucmd):
# file or link exists all fine
pidglobals.gammucmd = gammucmd
else:
# exit PID here as not Modem connection will work!
option = "gammucmd - Command given not found!"
cfg.errorandexit(option)
else:
pidglobals.wrapgammu = False
smsgwglobals.pidlogger.debug("WrapGammu: " +
str(pidglobals.wrapgammu))
testmode = cfg.getvalue('testmode', 'Off', 'pid')
if testmode == "On":
# set testmode - content "ERROR" "SUCCESS" and "LONGWAIT" is
# handled in a special way now
pidglobals.testmode = True
else:
pidglobals.testmode = False
smsgwglobals.pidlogger.debug("TestMode: " +
str(pidglobals.testmode))
retrypisurl = cfg.getvalue('retrypisurl', '2', 'pid')
smsgwglobals.pidlogger.debug(pidglobals.pidid + ": " +
"RetryPisUrl: " + retrypisurl)
retrywait = cfg.getvalue('retrywait', '5', 'pid')
smsgwglobals.pidlogger.debug(pidglobals.pidid + ": " +
"RetryWait: " + retrywait)
modemcfg = cfg.getvalue('modemlist', '[{}]', 'pid')
try:
# convert json to list of dictionary entries
modemlist = json.loads(modemcfg)
except:
cfg.errorandexit("modemlist - not a valid JSON structure!")
#Get carriers config
carriercfg = cfg.getvalue('carrierscfg', '{}', 'pid')
try:
# convert json to list of dictionary entries
pidglobals.carriersconfig = json.loads(carriercfg)
except:
cfg.errorandexit("carrierscfg - not a valid JSON structure!")
# check if modemcfg is set
if 'modemid' not in modemlist[0]:
# if len(modemlist) == 0:
cfg.errorandexit("modemlist - not set!!!")
else:
# validate modem settings
for modem in modemlist:
try:
re.compile(modem['regex'])
except:
cfg.errorandexit("modemlist - at " + modem['modemid'] +
" - invalid regex!")
# connect to USBModems and persist in pidglobals
Modem.connectmodems(modemlist)
smsgwglobals.pidlogger.debug(pidglobals.pidid + ": " +
"ModemList: " +
str(pidglobals.modemlist))
if len(pidglobals.modemlist) == 0:
errortext = "at any configured modem."
cfg.errorandexit(errortext, 2)
pisurlcfg = cfg.getvalue('pisurllist',
'[{"url": "ws://127.0.0.1:7788"}]',
'pid')
# convert json to list of dictionary entries
pisurllist = json.loads(pisurlcfg)
smsgwglobals.pidlogger.debug(pidglobals.pidid + ": " +
"PisUrlList: " +
str(pisurllist))
# endless try to connect to configured PIS
# error: wait for some secs, then 1 retry, then next PID in list
curpis = 0
tries = 1
while True:
try:
if pidglobals.closingcode:
raise
baseurl = pisurllist[curpis]['url']
pisurl = baseurl + "/ws"
smsgwglobals.pidlogger.info(pidglobals.pidid + ": " +
"Try " + str(tries) + ": " +
"Connecting to: " +
pisurl)
# init websocket client with heartbeat, 30 is fixed in all
# modules wis/pis/pid
ws = PidWsClient(pisurl,
protocols=['http-only', 'chat'],
heartbeat_freq=30)
ws.connect()
# set values for primary check in Websocket connection!
# trim ws out of ws:/.. and add http:/
pidglobals.curpisurl = "http" + baseurl[2:]
pidglobals.primpisurl = "http" + pisurllist[0]['url'][2:]
ws.run_forever()
except KeyboardInterrupt:
ws.close()
# leave while loop
break
except Exception as e:
# do retry except there is no more modem to communicate
if (pidglobals.closingcode is None or
pidglobals.closingcode < 4000):
# try to reconnect
smsgwglobals.pidlogger.info(pidglobals.pidid + ": " +
"Got a problem will reconnect "
"in " + retrywait + " seconds.")
smsgwglobals.pidlogger.debug(pidglobals.pidid + ": " +
"Problem is: " + str(e))
try:
time.sleep(int(retrywait))
except:
break
if tries < int(retrypisurl):
tries = tries + 1
else:
tries = 1
curpis = curpis + 1
if curpis == len(pisurllist):
curpis = 0
pidglobals.closingcode = None
elif pidglobals.closingcode == 4001:
# go back to inital PID
# reset while parameter for pis and retries
smsgwglobals.pidlogger.info(pidglobals.pidid + ": " +
"Going back to Prim PID")
curpis = 0
tries = 1
pidglobals.closingcode = None
elif pidglobals.closingcode == 4000:
# leave while loop
# no connection to modem found!
smsgwglobals.pidlogger.debug(pidglobals.pidid + ": Sleep 45 seconds before shutdown..." )
sleep(45)
break
elif pidglobals.closingcode == 4005:
# leave while loop
# pid restart requested
break
elif pidglobals.closingcode == 4010:
# leave while loop
# pid lost connection to the modem. Probably sim card ejected
# Or HEARTBEAT failed
break
def run(self):
# load the configuration
abspath = path.abspath(path.join(path.dirname(__file__), path.pardir))
configfile = abspath + '/conf/smsgw.conf'
gammucfg = abspath + '/conf/gammu.conf'
print(configfile)
cfg = SmsConfig(configfile)
pidglobals.pidid = cfg.getvalue('pidid', 'pid-dummy', 'pid')
smsgwglobals.pidlogger.debug("PisID: " + pidglobals.pidid)
testmode = cfg.getvalue('testmode', 'Off', 'pid')
if testmode == "On":
# set testmode - content "ERROR" "SUCCESS" and "LONGWAIT" is
# handled in a special way now
pidglobals.testmode = True
else:
pidglobals.testmode = False
smsgwglobals.pidlogger.debug("TestMode: " +
str(pidglobals.testmode))
retrypisurl = cfg.getvalue('retrypisurl', '2', 'pid')
smsgwglobals.pidlogger.debug(pidglobals.pidid + ": " +
"RetryPisUrl: " + retrypisurl)
retrywait = cfg.getvalue('retrywait', '5', 'pid')
smsgwglobals.pidlogger.debug(pidglobals.pidid + ": " +
"RetryWait: " + retrywait)
modemcfg = cfg.getvalue('modemlist', '[{}]', 'pid')
# convert json to list of dictionary entries
modemlist = json.loads(modemcfg)
# check if modemcfg is set
if not 'modemid' in modemlist[0]:
#if len(modemlist) == 0:
cfg.errorandexit("modemlist - not set!!!")
# connect to USBModems and persist in pidglobals
Modem.connectmodems(modemlist, gammucfg)
smsgwglobals.pidlogger.debug(pidglobals.pidid + ": " +
"ModemList: " +
str(pidglobals.modemlist))
pisurlcfg = cfg.getvalue('pisurllist',
'[{"url": "ws://127.0.0.1:7788"}]',
'pid')
# convert json to list of dictionary entries
pisurllist = json.loads(pisurlcfg)
smsgwglobals.pidlogger.debug(pidglobals.pidid + ": " +
"PisUrlList: " +
str(pisurllist))
# endless try to connect to configured PIS
# error: wait for some secs, then 1 retry, then next PID in list
curpis = 0
tries = 1
while True:
try:
if pidglobals.closingcode:
raise
baseurl = pisurllist[curpis]['url']
pisurl = baseurl + "/ws"
smsgwglobals.pidlogger.info(pidglobals.pidid + ": " +
"Try " + str(tries) + ": " +
"Connecting to: " +
pisurl)
# init websocket client with heartbeat, 30 is fixed in all
# modules wis/pis/pid
ws = PidWsClient(pisurl,
protocols=['http-only', 'chat'],
heartbeat_freq=30)
ws.connect()
# set values for primary check in Websocket connection!
# trim ws out of ws:/.. and add http:/
pidglobals.curpisurl = "http" + baseurl[2:]
pidglobals.primpisurl = "http" + pisurllist[0]['url'][2:]
ws.run_forever()
except KeyboardInterrupt:
ws.close()
# leave while loop
break
except Exception as e:
# do retry except there is no more modem to communicate
if (pidglobals.closingcode is None or
pidglobals.closingcode < 4000):
# try to reconnect
smsgwglobals.pidlogger.info(pidglobals.pidid + ": " +
"Got a problem will reconnect "
"in " + retrywait + " seconds.")
smsgwglobals.pidlogger.debug(pidglobals.pidid + ": " +
"Problem is: " + str(e))
try:
time.sleep(int(retrywait))
except:
break
if tries < int(retrypisurl):
tries = tries + 1
else:
tries = 1
curpis = curpis + 1
if curpis == len(pisurllist):
curpis = 0
pidglobals.closingcode = None
elif pidglobals.closingcode == 4001:
# go back to inital PID
# reset while parameter for pis and retries
smsgwglobals.pidlogger.info(pidglobals.pidid + ": " +
"Going back to Prim PID")
curpis = 0
tries = 1
pidglobals.closingcode = None
elif pidglobals.closingcode == 4000:
# leave while loop
# no connection to modem found!
break