def test_static_with_BladeStiff2D():
print('Testing linear statics with BladeStiff2D')
spb = StiffPanelBay()
spb.a = 2.
spb.b = 1.
spb.m = 12
spb.n = 13
spb.stack = [0, +45, -45, 90, -45, +45, 0]
spb.plyt = 1e-3 * 0.125
spb.laminaprop = (142.5e9, 8.7e9, 0.28, 5.1e9, 5.1e9, 5.1e9)
spb.add_panel(y1=0, y2=spb.b / 2., plyt=spb.plyt)
spb.add_panel(y1=spb.b / 2., y2=spb.b, plyt=spb.plyt)
bb = spb.b / 5.
bf = bb
stiff = spb.add_bladestiff2d(ys=spb.b / 2.,
bf=bf,
bb=bb,
fstack=[0, 90, 90, 0] * 8,
fplyt=spb.plyt * 1.,
flaminaprop=spb.laminaprop,
bstack=[0, 90, 90, 0] * 4,
bplyt=spb.plyt * 1.,
blaminaprop=spb.laminaprop,
mf=17,
nf=16)
stiff.flange.forces.append(
[stiff.flange.a / 2., stiff.flange.b, 0., 0., 1000.])
spb.calc_k0()
fext = spb.calc_fext()
inc, cs = static(spb.k0, fext, silent=True)
wpanelmin = spb.uvw_skin(cs[0])[2].min()
#NOTE repeated call on purpose to evaluate if cs[0] is being messed up
# somewhere
wpanelmin = spb.uvw_skin(cs[0])[2].min()
wflangemax = spb.uvw_stiffener(cs[0], 0, region='flange')[2].max()
#NOTE repeated call on purpose
wflangemax = spb.uvw_stiffener(cs[0], 0, region='flange')[2].max()
assert np.isclose(wpanelmin, -0.30581458201781481, atol=1.e-4, rtol=0.001)
assert np.isclose(wflangemax, 0.331155797371884, atol=1.e-4, rtol=0.001)
spb.plot_skin(cs[0],
filename='tmp_test_bladestiff2d_static_skin.png',
colorbar=True,
vec='w',
clean=False)
spb.plot_stiffener(
cs[0],
si=0,
region='flange',
filename='tmp_test_bladestiff2d_stiff_static_flange.png',
colorbar=True,
clean=False)
def test_static_with_BladeStiff2D():
print('Testing linear statics with BladeStiff2D')
spb = StiffPanelBay()
spb.a = 2.
spb.b = 1.
spb.m = 12
spb.n = 13
spb.stack = [0, +45, -45, 90, -45, +45, 0]
spb.plyt = 1e-3*0.125
spb.laminaprop = (142.5e9, 8.7e9, 0.28, 5.1e9, 5.1e9, 5.1e9)
spb.add_panel(y1=0, y2=spb.b/2., plyt=spb.plyt)
spb.add_panel(y1=spb.b/2., y2=spb.b, plyt=spb.plyt)
bb = spb.b/5.
bf = bb
stiff = spb.add_bladestiff2d(ys=spb.b/2., bf=bf, bb=bb,
fstack=[0, 90, 90, 0]*8,
fplyt=spb.plyt*1., flaminaprop=spb.laminaprop,
bstack=[0, 90, 90, 0]*4,
bplyt=spb.plyt*1., blaminaprop=spb.laminaprop,
mf=17, nf=16)
stiff.flange.forces.append([stiff.flange.a/2., stiff.flange.b, 0., 0., 1000.])
spb.calc_k0()
fext = spb.calc_fext()
inc, cs = static(spb.k0, fext, silent=True)
wpanelmin = spb.uvw_skin(cs[0])[2].min()
#NOTE repeated call on purpose to evaluate if cs[0] is being messed up
# somewhere
wpanelmin = spb.uvw_skin(cs[0])[2].min()
wflangemax = spb.uvw_stiffener(cs[0], 0, region='flange')[2].max()
#NOTE repeated call on purpose
wflangemax = spb.uvw_stiffener(cs[0], 0, region='flange')[2].max()
assert np.isclose(wpanelmin, -0.30581458201781481, atol=1.e-4, rtol=0.001)
assert np.isclose(wflangemax, 0.331155797371884, atol=1.e-4, rtol=0.001)
spb.plot_skin(cs[0], filename='tmp_test_bladestiff2d_static_skin.png', colorbar=True, vec='w', clean=False)
spb.plot_stiffener(cs[0], si=0, region='flange',
filename='tmp_test_bladestiff2d_stiff_static_flange.png', colorbar=True, clean=False)
def test_static_with_TStiff2D():
print('Testing static analysis with TStiff2D')
spb = StiffPanelBay()
spb.a = 2.
spb.b = 1.
spb.stack = [0, +45, -45, 90, -45, +45, 0]
spb.plyt = 1e-3*0.125
spb.laminaprop = (142.5e9, 8.7e9, 0.28, 5.1e9, 5.1e9, 5.1e9)
spb.model = 'plate_clt_donnell_bardell'
spb.m = 12
spb.n = 13
spb.add_panel(y1=0, y2=spb.b/2., plyt=spb.plyt)
spb.add_panel(y1=spb.b/2., y2=spb.b, plyt=spb.plyt)
bb = spb.b/5.
bf = bb
stiff = spb.add_tstiff2d(ys=spb.b/2., bf=bf, bb=bb,
fstack=[0, 90, 90, 0]*8,
fplyt=spb.plyt*1., flaminaprop=spb.laminaprop,
bstack=[0, 90, 90, 0]*4,
bplyt=spb.plyt*1., blaminaprop=spb.laminaprop,
mb=14, nb=13, mf=13, nf=12)
stiff.flange.forces.append([spb.a/2., bf, 0., 0., 1000.])
k0 = spb.calc_k0()
fext = spb.calc_fext()
inc, cs = static(spb.k0, fext, silent=True)
wpanelmin = spb.uvw_skin(cs[0])[2].min()
wbasemin = spb.uvw_stiffener(cs[0], 0, region='base')[2].min()
wflangemax = spb.uvw_stiffener(cs[0], 0, region='flange')[2].max()
spb.plot_skin(cs[0], filename='tmp_test_tstiff2d_static_skin.png',
colorbar=True, vec='w', clean=False)
spb.plot_stiffener(cs[0], si=0, region='base',
filename='tmp_test_tstiff2d_static_stiff_base.png', colorbar=True,
vec='w', clean=False)
spb.plot_stiffener(cs[0], si=0, region='flange',
filename='tmp_test_tstiff2d_static_stiff_flange.png', colorbar=True,
clean=False)