server.starttls()
server.login(sender, password)
server.sendmail(sender, recipient, msg+body)
server.quit()
logging.basicConfig(level=logging.INFO)
p = [
[ ['G','moist','level',0,0,100], ['LC','chart1','Time','Value',0,100] ],
]
c1 = load([])
readings = []
conn = ControlMyPi('*****@*****.**', 'password', 'moisture', 'Moisture monitor', p, on_msg)
delta = datetime.timedelta(minutes=30)
next_time = datetime.datetime.now()
delta_email = datetime.timedelta(days=1)
next_email_time = datetime.datetime.now()
if conn.start_control():
try:
while True:
dt = datetime.datetime.now()
m = mcp3008.read_pct(5)
readings.append(m)
update_lcd(m)
to_update = {'moist':m}
def switch_led(state):
if led_state[GPIO_NUM] != state:
GPIO.output(GPIO_NUM, not state) #Low to glow!
conn.update_status({'state': 'on' if state else 'off'})
led_state[GPIO_NUM] = state
def on_control_message(conn, key, value):
if key == 'on_button':
switch_led(True)
elif key == 'off_button':
switch_led(False)
def main_loop():
switch_led(True)
while True:
time.sleep(3) #Yield for a while but keep main thread running
conn = ControlMyPi(JABBER_ID, JABBER_PASSWORD, SHORT_ID, FRIENDLY_NAME,
PANEL_FORM, on_control_message)
if conn.start_control():
try:
main_loop()
finally:
conn.stop_control()
else:
print("FAILED TO CONNECT")
conn.update_status({'echo':'Pi echoes back: '+value})
else:
print key, value
def main_loop():
# Block here. When you exit this function the connection to controlmypi.com will be closed
raw_input("Press Enter to finish\n")
# Setup logging - change the log level here to debug faults
logging.basicConfig(level=logging.ERROR, format='%(levelname)-8s %(message)s')
jid = raw_input("Jabber ID: ")
password = getpass.getpass("Jabber password: "******"Control panel ID: ")
name = raw_input("Control panel name: ")
panel_form = [
[ ['L','Echo box:'] ],
[ ['E','echobox','send'],['S','echo','-'] ]
]
conn = ControlMyPi(jid, password, id, name, panel_form, on_control_message, 'hid', on_registered)
print "Connecting to ControlMyPi..."
if conn.start_control():
try:
main_loop()
finally:
conn.stop_control()
else:
print("FAILED TO CONNECT")
# Start the GPS
gps = GPS()
# Create the Accelerometer object. Change to acc=None if you don't have an accelerometer.
acc = Accelerometer()
# Control My Pi
def on_control_message(conn, key, value):
if key == 'start_button':
rec.start()
elif key == 'stop_button':
rec.stop()
conn = ControlMyPi(JABBER_ID, JABBER_PASSWORD, SHORT_ID, FRIENDLY_NAME, PANEL_FORM, on_control_message)
# Recording
rec = Recorder(gps, conn)
def on_rec_button():
if rec.recording == 's':
rec.start()
else:
rec.stop()
# Start the TextStar LCD. Change to lcd=None if you don't have a TextStar LCD.
lcd = TextStar(on_rec_button)
if conn.start_control():
try:
from time import sleep
import mcp3008
from controlmypi import ControlMyPi
import logging
def on_msg(conn, key, value):
pass
logging.basicConfig(level=logging.INFO)
p = [
[['G', 'moist', 'level', 0, 0, 1023]],
]
conn = ControlMyPi('*****@*****.**', 'password3649', 'moisture',
'Moisture monitor', p, on_msg)
if conn.start_control():
try:
while True:
m = mcp3008.readadc(5)
conn.update_status({'moist': m})
sleep(30)
finally:
conn.stop_control()
import datetime
def on_msg(conn, key, value):
pass
def append_chart_point(chart, point):
if len(chart) >= 10:
del chart[0]
chart.append(point)
return chart
logging.basicConfig(level=logging.INFO)
p = [
[ ['G','moist','% level',0,0,100], ['LC','chart1','Time','Value',0,100] ],
]
c1 = []
conn = ControlMyPi('*****@*****.**', 'password', 'moistcmp2', 'Moisture monitor 2', p, on_msg)
if conn.start_control():
try:
while True:
dt = datetime.datetime.now().strftime('%H:%M:%S')
m = mcp3008.read_pct(5)
c1 = append_chart_point(c1, [dt, m])
conn.update_status({'moist':m,'chart1':c1})
sleep(30)
finally:
conn.stop_control()
else:
print key, value
def main_loop():
# Block here. When you exit this function the connection to controlmypi.com will be closed
raw_input("Press Enter to finish\n")
# Setup logging - change the log level here to debug faults
logging.basicConfig(level=logging.ERROR, format='%(levelname)-8s %(message)s')
jid = raw_input("Jabber ID: ")
password = getpass.getpass("Jabber password: "******"Control panel ID: ")
name = raw_input("Control panel name: ")
panel_form = [[['L', 'Echo box:']],
[['E', 'echobox', 'send'], ['S', 'echo', '-']]]
conn = ControlMyPi(jid, password, id, name, panel_form, on_control_message,
'hid', on_registered)
print "Connecting to ControlMyPi..."
if conn.start_control():
try:
main_loop()
finally:
conn.stop_control()
else:
print("FAILED TO CONNECT")
server.sendmail(sender, recipient, msg + body)
server.quit()
logging.basicConfig(level=logging.INFO)
p = [
[['G', 'moist', 'level', 0, 0, 100],
['LC', 'chart1', 'Time', 'Value', 0, 100]],
]
c1 = load([])
readings = []
conn = ControlMyPi('*****@*****.**', 'password', 'moisture', 'Moisture monitor',
p, on_msg)
delta = datetime.timedelta(minutes=30)
next_time = datetime.datetime.now()
delta_email = datetime.timedelta(days=1)
next_email_time = datetime.datetime.now()
if conn.start_control():
try:
while True:
dt = datetime.datetime.now()
m = mcp3008.read_pct(5)
readings.append(m)
update_lcd(m)
to_update = {'moist': m}
# Start the GPS
gps = GPS()
# Create the Accelerometer object. Change to acc=None if you don't have an accelerometer.
acc = Accelerometer()
# Control My Pi
def on_control_message(conn, key, value):
if key == 'start_button':
rec.start()
elif key == 'stop_button':
rec.stop()
conn = ControlMyPi(JABBER_ID, JABBER_PASSWORD, SHORT_ID, FRIENDLY_NAME,
PANEL_FORM, on_control_message)
# Recording
rec = Recorder(gps, conn)
def on_rec_button():
if rec.recording == 's':
rec.start()
else:
rec.stop()
# Start the TextStar LCD. Change to lcd=None if you don't have a TextStar LCD.
lcd = TextStar(on_rec_button)
def append_chart_point(chart, point):
if len(chart) >= 10:
del chart[0]
chart.append(point)
return chart
logging.basicConfig(level=logging.INFO)
p = [
[['G', 'moist', '% level', 0, 0, 100],
['LC', 'chart1', 'Time', 'Value', 0, 100]],
]
c1 = []
conn = ControlMyPi('*****@*****.**', 'password', 'moistcmp2',
'Moisture monitor 2', p, on_msg)
if conn.start_control():
try:
while True:
dt = datetime.datetime.now().strftime('%H:%M:%S')
m = mcp3008.read_pct(5)
c1 = append_chart_point(c1, [dt, m])
conn.update_status({'moist': m, 'chart1': c1})
sleep(30)
finally:
conn.stop_control()
passMail = 'visualizar'
updateControlMyPi = True
updateEmailSender = False
p = [
[ ['G','moist','level',0,0,100], ['LC','chart1','Time','Value',0,100] ],
]
c1 = load([])
readings = []
if updateControlMyPi:
conn = ControlMyPi(idMail, passMail, 'moisbanc', 'Sensor de Humedad Bancal', p, on_msg)
delta = datetime.timedelta(minutes=120)
next_time = datetime.datetime.now()
delta_email = datetime.timedelta(days=1)
next_email_time = datetime.datetime.now()
if conn.start_control():
try:
while True:
dt = datetime.datetime.now()
m = mcp3008.read_pct(3)
readings.append(m)
to_update = {'moist':m}
if(debugMode):
from time import sleep
import mcp3008
from controlmypi import ControlMyPi
import logging
def on_msg(conn, key, value):
pass
logging.basicConfig(level=logging.INFO)
p = [
[ ['G','moist','level',0,0,1023] ],
]
conn = ControlMyPi('*****@*****.**', 'password', 'moisture', 'Moisture monitor', p, on_msg)
if conn.start_control():
try:
while True:
m = mcp3008.readadc(5)
conn.update_status({'moist':m})
sleep(30)
finally:
conn.stop_control()
