def TestSPUIter():
size = 32
data = extarray.extarray('I', range(size))
prgm = env.Program()
code = prgm.get_stream()
r_ea_data = prgm.acquire_register()
r_ls_data = prgm.acquire_register()
r_size = prgm.acquire_register()
r_tag = prgm.acquire_register()
#print 'array ea: %X' % (data.buffer_info()[0])
#print 'r_zero = %s, ea_data = %s, ls_data = %s, r_size = %s, r_tag = %s' % (
# str(code.r_zero), str(r_ea_data), str(r_ls_data), str(r_size), str(r_tag))
# Load the effective address
util.load_word(code, r_ea_data, data.buffer_info()[0])
# Load the size
util.load_word(code, r_size, size * 4)
# Load the tag
code.add(spu.ai(r_tag, code.r_zero, 12))
# Load the lsa
code.add(spu.ai(r_ls_data, code.r_zero, 0))
# Load the data into address 0
dma.mfc_get(code, r_ls_data, r_ea_data, r_size, r_tag)
# Set the tag bit to 12
dma.mfc_write_tag_mask(code, 1<<12);
# Wait for the transfer to complete
dma.mfc_read_tag_status_all(code);
# Increment the data values by 1 using an unrolled loop (no branches)
# r_current = code.acquire_register()
current = var.SignedWord(0, code)
# Use an SPU iter
for lsa in syn_iter(code, size * 4, 16):
code.add(spu.lqx(current, code.r_zero, lsa))
# code.add(spu.ai(1, r_current, r_current))
current.v = current + current
code.add(spu.stqx(current, code.r_zero, lsa))
# code.prgm.release_register(r_current)
#current.release_register(code)
# Store the values back to main memory
# Load the tag
code.add(spu.ai(r_tag, code.r_zero, 13))
# Load the data into address 0
dma.mfc_put(code, r_ls_data, r_ea_data, r_size, r_tag)
# Set the tag bit to 12
dma.mfc_write_tag_mask(code, 1<<13);
# Wait for the transfer to complete
dma.mfc_read_tag_status_all(code);
# Cleanup
prgm.release_register(r_ea_data)
prgm.release_register(r_ls_data)
prgm.release_register(r_size)
prgm.release_register(r_tag)
# Stop for debugging
# code.add(spu.stop(0xA))
# Execute the code
prgm.add(code)
proc = env.Processor()
r = proc.execute(prgm)
for i in range(0, size):
assert(data[i] == i + i)
return
def _save_buffer(self): dma.mfc_put(self.code, self.ls, syn_range.get_current(self), self.buffer_size, self.tag) return
# Wait for completion
# Set the completion mask; here we complete tag 12
spu.il(r_tag, 1 << 12)
dma.mfc_write_tag_mask(code, r_tag)
dma.mfc_read_tag_status_all(code)
# Set the parameters for a PUT command
bbi = b.buffer_info()
spu.il(r_lsa, 0x1000) # Local Store address 0x1000
load_word(code, r_mma, bbi[0]) # Main Memory address of array b
spu.il(r_size, b.itemsize * bbi[1]) # Size of array b in bytes
spu.il(r_tag, 12) # DMA tag 12
# Issue a DMA PUT command
dma.mfc_put(code, r_lsa, r_mma, r_size, r_tag)
# Wait for completion
# Set the completion mask; here we complete tag 12
spu.il(r_tag, 1 << 12)
dma.mfc_write_tag_mask(code, r_tag)
dma.mfc_read_tag_status_all(code)
prgm.release_register(r_lsa)
prgm.release_register(r_mma)
prgm.release_register(r_size)
prgm.release_register(r_tag)
# Execute the code
prgm += code
proc.execute(prgm)
def TestSPUParallelIter(data, size, n_spus = 6, buffer_size = 16, run_code = True):
import time
# n_spus = 8
# buffer_size = 16 # 16 ints/buffer
# n_buffers = 4 # 4 buffers/spu
# n_buffers = size / buffer_size
# size = buffer_size * n_buffers * n_spus
# data = array.array('I', range(size + 2))
#data = env.aligned_memory(n, typecode = 'I')
#data.copy_to(data_array.buffer_info()[0], len(data_array))
# print 'Data align: 0x%X, %d' % (data.buffer_info()[0], data.buffer_info()[0] % 16)
code = env.ParallelInstructionStream()
# code = env.InstructionStream()
r_zero = code.acquire_register()
r_ea_data = code.acquire_register()
r_ls_data = code.acquire_register()
r_size = code.acquire_register()
r_tag = code.acquire_register()
# Load zero
util.load_word(code, r_zero, 0)
# print 'array ea: 0x%X 0x%X' % (data.buffer_info()[0], long(data.buffer_info()[0]))
# print 'r_zero = %d, ea_data = %d, ls_data = %d, r_size = %d, r_tag = %d' % (
# r_zero, r_ea_data, r_ls_data, r_size, r_tag)
# Load the effective address
if data.buffer_info()[0] % 16 == 0:
util.load_word(code, r_ea_data, data.buffer_info()[0])
else:
util.load_word(code, r_ea_data, data.buffer_info()[0] + 8)
ea_start = data.buffer_info()[0]
# Iterate over each buffer
for ea in parallel(syn_range(code, ea_start, ea_start + size * 4 , buffer_size * 4)):
# ea = var.SignedWord(code = code, reg = r_ea_data)
# print 'n_iters:', size / buffer_size
# for i in syn_range(code, size / buffer_size):
# code.add(spu.stop(0xB))
# Load the size
util.load_word(code, r_size, buffer_size * 4)
# Load the tag
code.add(spu.ai(r_tag, r_zero, 12))
# Load the lsa
code.add(spu.ai(r_ls_data, r_zero, 0))
# Load the data into address 0
dma.mfc_get(code, r_ls_data, ea, r_size, r_tag)
# Set the tag bit to 12
dma.mfc_write_tag_mask(code, 1<<12);
# Wait for the transfer to complete
dma.mfc_read_tag_status_all(code);
# Increment the data values by 1 using an unrolled loop (no branches)
# r_current = code.acquire_register()
current = var.SignedWord(0, code)
count = var.SignedWord(0, code)
# Use an SPU iter
for lsa in syn_iter(code, buffer_size * 4, 16):
code.add(spu.lqx(current, r_zero, lsa))
# code.add(spu.ai(1, r_current, r_current))
current.v = current + current
code.add(spu.stqx(current, r_zero, lsa))
count.v = count + 1
code.add(spu.stqx(count, r_zero, 0))
# code.release_register(r_current)
current.release_registers(code)
# Store the values back to main memory
# Load the tag
code.add(spu.ai(r_tag, r_zero, 13))
# Load the data into address 0
dma.mfc_put(code, r_ls_data, ea.reg, r_size, r_tag)
# Set the tag bit to 13
dma.mfc_write_tag_mask(code, 1<<13);
# Wait for the transfer to complete
dma.mfc_read_tag_status_all(code);
# code.add(spu.stop(0xB))
# Update ea
# ea.v = ea + (buffer_size * 4)
# /for ea address
# Cleanup
code.release_register(r_zero)
code.release_register(r_ea_data)
code.release_register(r_ls_data)
code.release_register(r_size)
code.release_register(r_tag)
if not run_code:
return code
# Stop for debugging
# code.add(spu.stop(0xA))
# Execute the code
proc = env.Processor()
#data.copy_from(data_array.buffer_info()[0], len(data_array))
def print_blocks():
for i in range(0, size, buffer_size):
# print data[i:(i + buffer_size)]
print data[i + buffer_size],
print ''
# print_blocks()
s = time.time()
r = proc.execute(code, n_spus = n_spus)
# r = proc.execute(code)
t = time.time() - s
# print_blocks()
return t
# Set the completion mask; here we complete tag 12 spu.il(r_tag, 1 << 12) dma.mfc_write_tag_mask(code, r_tag) dma.mfc_read_tag_status_all(code) # Set the parameters for a PUT command bbi = b.buffer_info() spu.il(r_lsa, 0x1000) # Local Store address 0x1000 load_word(code, r_mma, bbi[0]) # Main Memory address of array b spu.il(r_size, b.itemsize * bbi[1]) # Size of array b in bytes spu.il(r_tag, 12) # DMA tag 12 # Issue a DMA PUT command dma.mfc_put(code, r_lsa, r_mma, r_size, r_tag) # Wait for completion # Set the completion mask; here we complete tag 12 spu.il(r_tag, 1 << 12) dma.mfc_write_tag_mask(code, r_tag) dma.mfc_read_tag_status_all(code) prgm.release_register(r_lsa) prgm.release_register(r_mma) prgm.release_register(r_size) prgm.release_register(r_tag) # Execute the code prgm += code proc.execute(prgm)