def cuckoo_init(level, ctx, cfg=None):
"""Initialize Cuckoo configuration.
@param quiet: enable quiet mode.
"""
logo()
# It would appear this is the first time Cuckoo is being run (on this
# Cuckoo Working Directory anyway).
if not os.path.isdir(cwd()) or not os.listdir(cwd()):
cuckoo_create(ctx.user, cfg)
sys.exit(0)
# Determine if this is a proper CWD.
if not os.path.exists(cwd(".cwd")):
sys.exit(
"No proper Cuckoo Working Directory was identified, did you pass "
"along the correct directory?"
)
init_console_logging(level)
check_configs()
check_version()
ctx.log and init_logging(level)
# Determine if any CWD updates are required and if so, do them.
current = open(cwd(".cwd"), "rb").read().strip()
latest = open(cwd(".cwd", private=True), "rb").read().strip()
if current != latest:
migrate_cwd()
open(cwd(".cwd"), "wb").write(latest)
Database().connect()
# Load additional Signatures.
load_signatures()
init_modules()
init_tasks()
init_yara(True)
init_binaries()
init_rooter()
init_routing()
def cuckoo_init(level, ctx, cfg=None):
"""Initialize Cuckoo configuration.
@param quiet: enable quiet mode.
"""
logo()
# It would appear this is the first time Cuckoo is being run (on this
# Cuckoo Working Directory anyway).
if not os.path.isdir(cwd()) or not os.listdir(cwd()):
cuckoo_create(ctx.user, cfg)
sys.exit(0)
# Determine if this is a proper CWD.
if not os.path.exists(cwd(".cwd")):
sys.exit(
"No proper Cuckoo Working Directory was identified, did you pass "
"along the correct directory?"
)
init_console_logging(level)
check_configs()
check_version()
ctx.log and init_logging(level)
# Determine if any CWD updates are required and if so, do them.
current = open(cwd(".cwd"), "rb").read().strip()
latest = open(cwd(".cwd", private=True), "rb").read().strip()
if current != latest:
migrate_cwd()
open(cwd(".cwd"), "wb").write(latest)
Database().connect()
# Load additional Signatures.
load_signatures()
init_modules()
init_tasks()
init_yara(True)
init_binaries()
init_rooter()
init_routing()
def cuckoo_init(level, ctx, cfg=None):
"""Initialize Cuckoo configuration.
@param quiet: enable quiet mode.
"""
logo()
# It would appear this is the first time Cuckoo is being run (on this
# Cuckoo Working Directory anyway).
if not os.path.isdir(cwd()) or not os.listdir(cwd()):
cuckoo_create(ctx.user, cfg)
sys.exit(0)
# Determine if this is a proper CWD.
if not os.path.exists(cwd(".cwd")):
sys.exit(
"No proper Cuckoo Working Directory was identified, did you pass "
"along the correct directory? For new installations please use a "
"non-existant directory to build up the CWD! You can craft a CWD "
"manually, but keep in mind that the CWD layout may change along "
"with Cuckoo releases (and don't forget to fill out '$CWD/.cwd')!"
)
init_console_logging(level)
check_configs()
check_version()
ctx.log and init_logging(level)
# Determine if any CWD updates are required and if so, do them.
current = open(cwd(".cwd"), "rb").read().strip()
latest = open(cwd(".cwd", private=True), "rb").read().strip()
if current != latest:
migrate_cwd()
open(cwd(".cwd"), "wb").write(latest)
Database().connect()
# Load additional Signatures.
load_signatures()
init_modules()
init_tasks()
init_yara()
init_binaries()
init_rooter()
init_routing()
signatures = 0
for sig in cuckoo.signatures:
if not sig.enabled:
continue
signatures += 1
if not signatures:
log.warning(
"It appears that you haven't loaded any Cuckoo Signatures. "
"Signatures are highly recommended and improve & enrich the "
"information extracted during an analysis. They also make up "
"for the analysis score that you see in the Web Interface - so, "
"pretty important!"
)
log.warning(
"You'll be able to fetch all the latest Cuckoo Signaturs, Yara "
"rules, and more goodies by running the following command:"
)
raw = cwd(raw=True)
if raw == "." or raw == "~/.cuckoo":
command = "cuckoo community"
elif " " in raw or "'" in raw:
command = 'cuckoo --cwd "%s" community' % raw
else:
command = "cuckoo --cwd %s community" % raw
log.info("$ %s", green(command))
def cuckoo_init(level, ctx, cfg=None):
"""Initialize Cuckoo configuration.
@param quiet: enable quiet mode.
"""
logo()
# It would appear this is the first time Cuckoo is being run (on this
# Cuckoo Working Directory anyway).
if not os.path.isdir(cwd()) or not os.listdir(cwd()):
cuckoo_create(ctx.user, cfg)
sys.exit(0)
# Determine if this is a proper CWD.
if not os.path.exists(cwd(".cwd")):
sys.exit(
"No proper Cuckoo Working Directory was identified, did you pass "
"along the correct directory? For new installations please use a "
"non-existant directory to build up the CWD! You can craft a CWD "
"manually, but keep in mind that the CWD layout may change along "
"with Cuckoo releases (and don't forget to fill out '$CWD/.cwd')!"
)
init_console_logging(level)
# Only one Cuckoo process should exist per CWD. Run this check before any
# files are possibly modified. Note that we mkdir $CWD/pidfiles/ here as
# its CWD migration rules only kick in after the pidfile check.
mkdir(cwd("pidfiles"))
pidfile = Pidfile("cuckoo")
if pidfile.exists():
log.error(red("Cuckoo is already running. PID: %s"), pidfile.pid)
sys.exit(1)
pidfile.create()
check_configs()
check_version()
ctx.log and init_logging(level)
# Determine if any CWD updates are required and if so, do them.
current = open(cwd(".cwd"), "rb").read().strip()
latest = open(cwd(".cwd", private=True), "rb").read().strip()
if current != latest:
migrate_cwd()
open(cwd(".cwd"), "wb").write(latest)
Database().connect()
# Load additional Signatures.
load_signatures()
init_modules()
init_tasks()
init_yara()
init_binaries()
init_rooter()
init_routing()
signatures = 0
for sig in cuckoo.signatures:
if not sig.enabled:
continue
signatures += 1
if not signatures:
log.warning(
"It appears that you haven't loaded any Cuckoo Signatures. "
"Signatures are highly recommended and improve & enrich the "
"information extracted during an analysis. They also make up "
"for the analysis score that you see in the Web Interface - so, "
"pretty important!"
)
log.warning(
"You'll be able to fetch all the latest Cuckoo Signaturs, Yara "
"rules, and more goodies by running the following command:"
)
raw = cwd(raw=True)
if raw == "." or raw == "~/.cuckoo":
command = "cuckoo community"
elif " " in raw or "'" in raw:
command = 'cuckoo --cwd "%s" community' % raw
else:
command = "cuckoo --cwd %s community" % raw
log.info("$ %s", green(command))
def cuckoo_init(level, ctx, cfg=None):
"""Initialize Cuckoo configuration.
@param quiet: enable quiet mode.
"""
logo()
# It would appear this is the first time Cuckoo is being run (on this
# Cuckoo Working Directory anyway).
if not os.path.isdir(cwd()) or not os.listdir(cwd()):
cuckoo_create(ctx.user, cfg)
sys.exit(0)
# Determine if this is a proper CWD.
if not os.path.exists(cwd(".cwd")):
sys.exit(
"No proper Cuckoo Working Directory was identified, did you pass "
"along the correct directory? For new installations please use a "
"non-existant directory to build up the CWD! You can craft a CWD "
"manually, but keep in mind that the CWD layout may change along "
"with Cuckoo releases (and don't forget to fill out '$CWD/.cwd')!")
init_console_logging(level)
# Only one Cuckoo process should exist per CWD. Run this check before any
# files are possibly modified. Note that we mkdir $CWD/pidfiles/ here as
# its CWD migration rules only kick in after the pidfile check.
mkdir(cwd("pidfiles"))
pidfile = Pidfile("cuckoo")
if pidfile.exists():
log.error(red("Cuckoo is already running. PID: %s"), pidfile.pid)
sys.exit(1)
pidfile.create()
check_configs()
check_version()
ctx.log and init_logging(level)
# Determine if any CWD updates are required and if so, do them.
current = open(cwd(".cwd"), "rb").read().strip()
latest = open(cwd(".cwd", private=True), "rb").read().strip()
if current != latest:
migrate_cwd()
open(cwd(".cwd"), "wb").write(latest)
# Ensure the user is able to create and read temporary files.
if not ensure_tmpdir():
sys.exit(1)
Database().connect()
# Load additional Signatures.
load_signatures()
init_modules()
init_tasks()
init_yara()
init_binaries()
init_rooter()
init_routing()
signatures = 0
for sig in cuckoo.signatures:
if not sig.enabled:
continue
signatures += 1
if not signatures:
log.warning(
"It appears that you haven't loaded any Cuckoo Signatures. "
"Signatures are highly recommended and improve & enrich the "
"information extracted during an analysis. They also make up "
"for the analysis score that you see in the Web Interface - so, "
"pretty important!")
log.warning(
"You'll be able to fetch all the latest Cuckoo Signaturs, Yara "
"rules, and more goodies by running the following command:")
log.info("$ %s", green(format_command("community")))
def cuckoo_init(level, ctx, cfg=None):
"""Initialize Cuckoo configuration.
@param quiet: enable quiet mode.
"""
logo()
# It would appear this is the first time Cuckoo is being run (on this
# Cuckoo Working Directory anyway).
if not os.path.isdir(cwd()) or not os.listdir(cwd()):
cuckoo_create(ctx.user, cfg)
sys.exit(0)
# Determine if this is a proper CWD.
if not os.path.exists(cwd(".cwd")):
sys.exit(
"No proper Cuckoo Working Directory was identified, did you pass "
"along the correct directory?"
)
init_console_logging(level)
check_configs()
check_version()
ctx.log and init_logging(level)
# Determine if any CWD updates are required and if so, do them.
current = open(cwd(".cwd"), "rb").read().strip()
latest = open(cwd(".cwd", private=True), "rb").read().strip()
if current != latest:
migrate_cwd()
open(cwd(".cwd"), "wb").write(latest)
Database().connect()
# Load additional Signatures.
load_signatures()
init_modules()
init_tasks()
init_yara()
init_binaries()
init_rooter()
init_routing()
signatures = 0
for sig in cuckoo.signatures:
if not sig.enabled:
continue
signatures += 1
if not signatures:
log.warning(
"It appears that you haven't loaded any Cuckoo Signatures. "
"Signatures are highly recommended and improve & enrich the "
"information extracted during an analysis. They also make up "
"for the analysis score that you see in the Web Interface - so, "
"pretty important!"
)
log.warning(
"You'll be able to fetch all the latest Cuckoo Signaturs, Yara "
"rules, and more goodies by running the following command:"
)
raw = cwd(raw=True)
if raw == "." or raw == "~/.cuckoo":
command = "cuckoo community"
elif " " in raw or "'" in raw:
command = 'cuckoo --cwd "%s" community' % raw
else:
command = "cuckoo --cwd %s community" % raw
log.info("$ %s", green(command))