def test_uniqueConfigurations(printer_output_device):
printer = PrinterOutputModel(MagicMock())
# Add a printer and fire the signal that ensures they get hooked up correctly.
printer_output_device._printers = [printer]
printer_output_device._onPrintersChanged()
assert printer_output_device.uniqueConfigurations == []
configuration = PrinterConfigurationModel()
printer.addAvailableConfiguration(configuration)
assert printer_output_device.uniqueConfigurations == [configuration]
# Once the type of printer is set, it's active configuration counts as being set.
# In that case, that should also be added to the list of available configurations
printer.updateType("blarg!")
loaded_material = MaterialOutputModel(guid="",
type="PLA",
color="Blue",
brand="Generic",
name="Blue PLA")
loaded_left_extruder = ExtruderConfigurationModel(0)
loaded_left_extruder.setMaterial(loaded_material)
loaded_right_extruder = ExtruderConfigurationModel(1)
loaded_right_extruder.setMaterial(loaded_material)
printer.printerConfiguration.setExtruderConfigurations(
[loaded_left_extruder, loaded_right_extruder])
assert printer_output_device.uniqueConfigurations == [
configuration, printer.printerConfiguration
]
def updateOutputModel(self, model: PrinterOutputModel) -> None:
"""Updates the given output model.
:param model: - The output model to update.
"""
model.updateKey(self.uuid)
model.updateName(self.friendly_name)
model.updateUniqueName(self.unique_name)
model.updateType(self.machine_variant)
model.updateState(self.status if self.enabled else "disabled")
model.updateBuildplate(
self.build_plate.type if self.build_plate else "glass")
model.setCameraUrl(
QUrl("http://{}:8080/?action=stream".format(self.ip_address)))
if not model.printerConfiguration:
# Prevent accessing printer configuration when not available.
# This sometimes happens when a printer was just added to a group and Cura is connected to that group.
return
# Set the possible configurations based on whether a Material Station is present or not.
if self.material_station and self.material_station.material_slots:
self._updateAvailableConfigurations(model)
if self.configuration:
self._updateActiveConfiguration(model)
def updateOutputModel(self, model: PrinterOutputModel) -> None:
model.updateKey(self.uuid)
model.updateName(self.friendly_name)
model.updateType(self.machine_variant)
model.updateState(self.status if self.enabled else "disabled")
model.updateBuildplate(self.build_plate.type if self.build_plate else "glass")
for configuration, extruder_output, extruder_config in \
zip(self.configuration, model.extruders, model.printerConfiguration.extruderConfigurations):
configuration.updateOutputModel(extruder_output)
configuration.updateConfigurationModel(extruder_config)
def updateOutputModel(self, model: PrinterOutputModel) -> None:
model.updateKey(self.uuid)
model.updateName(self.friendly_name)
model.updateType(self.machine_variant)
model.updateState(self.status if self.enabled else "disabled")
model.updateBuildplate(
self.build_plate.type if self.build_plate else "glass")
for configuration, extruder_output, extruder_config in \
zip(self.configuration, model.extruders, model.printerConfiguration.extruderConfigurations):
configuration.updateOutputModel(extruder_output)
configuration.updateConfigurationModel(extruder_config)
def updateOutputModel(self, model: PrinterOutputModel) -> None:
model.updateKey(self.uuid)
model.updateName(self.friendly_name)
model.updateType(self.machine_variant)
model.updateState(self.status if self.enabled else "disabled")
model.updateBuildplate(self.build_plate.type if self.build_plate else "glass")
model.setCameraUrl(QUrl("http://{}:8080/?action=stream".format(self.ip_address)))
for configuration, extruder_output, extruder_config in \
zip(self.configuration, model.extruders, model.printerConfiguration.extruderConfigurations):
configuration.updateOutputModel(extruder_output)
configuration.updateConfigurationModel(extruder_config)
def _build_printer_output_model(self) -> PrinterOutputModel:
"""Returns printer Output Model for this device."""
printer_output_model = PrinterOutputModel(
output_controller=self._printer_output_controller,
number_of_extruders=_NUM_EXTRUDERS)
printer_output_model.updateKey(self._address)
printer_output_model.updateName(self.address)
printer_output_model.updateState('idle')
printer_output_model.setAvailableConfigurations(
[_build_printer_conf_model()])
printer_output_model.updateType('Monoprice Select Mini')
printer_output_model.updateActivePrintJob(self._print_job_model)
return printer_output_model
def test_uniqueConfigurations_empty_is_filtered_out(printer_output_device):
printer = PrinterOutputModel(MagicMock())
# Add a printer and fire the signal that ensures they get hooked up correctly.
printer_output_device._printers = [printer]
printer_output_device._onPrintersChanged()
printer.updateType("blarg!")
empty_material = MaterialOutputModel(guid = "", type = "empty", color = "empty", brand = "Generic", name = "Empty")
empty_left_extruder = ExtruderConfigurationModel(0)
empty_left_extruder.setMaterial(empty_material)
empty_right_extruder = ExtruderConfigurationModel(1)
empty_right_extruder.setMaterial(empty_material)
printer.printerConfiguration.setExtruderConfigurations([empty_left_extruder, empty_right_extruder])
assert printer_output_device.uniqueConfigurations == []
def _updatePrinter(self, printer: PrinterOutputModel,
data: Dict[str, Any]) -> None:
# For some unknown reason the cluster wants UUID for everything, except for sending a job directly to a printer.
# Then we suddenly need the unique name. So in order to not have to mess up all the other code, we save a mapping.
self._printer_uuid_to_unique_name_mapping[
data["uuid"]] = data["unique_name"]
definitions = ContainerRegistry.getInstance().findDefinitionContainers(
name=data["machine_variant"])
if not definitions:
Logger.log("w", "Unable to find definition for machine variant %s",
data["machine_variant"])
return
machine_definition = definitions[0]
printer.updateName(data["friendly_name"])
printer.updateKey(data["uuid"])
printer.updateType(data["machine_variant"])
if data["status"] != "unreachable":
self._application.getDiscoveredPrintersModel(
).updateDiscoveredPrinter(data["ip_address"],
name=data["friendly_name"],
machine_type=data["machine_variant"])
# Do not store the build plate information that comes from connect if the current printer has not build plate information
if "build_plate" in data and machine_definition.getMetaDataEntry(
"has_variant_buildplates", False):
printer.updateBuildplate(data["build_plate"]["type"])
if not data["enabled"]:
printer.updateState("disabled")
else:
printer.updateState(data["status"])
for index in range(0, self._number_of_extruders):
extruder = printer.extruders[index]
try:
extruder_data = data["configuration"][index]
except IndexError:
break
extruder.updateHotendID(extruder_data.get("print_core_id", ""))
material_data = extruder_data["material"]
if extruder.activeMaterial is None or extruder.activeMaterial.guid != material_data[
"guid"]:
material = self._createMaterialOutputModel(material_data)
extruder.updateActiveMaterial(material)
def updateOutputModel(self, model: PrinterOutputModel) -> None:
model.updateKey(self.uuid)
model.updateName(self.friendly_name)
model.updateType(self.machine_variant)
model.updateState(self.status if self.enabled else "disabled")
model.updateBuildplate(
self.build_plate.type if self.build_plate else "glass")
model.setCameraUrl(
QUrl("http://{}:8080/?action=stream".format(self.ip_address)))
# Set the possible configurations based on whether a Material Station is present or not.
if self.material_station and self.material_station.material_slots:
self._updateAvailableConfigurations(model)
if self.configuration:
self._updateActiveConfiguration(model)
def _updatePrinter(self, printer: PrinterOutputModel, data: Dict[str, Any]) -> None:
# For some unknown reason the cluster wants UUID for everything, except for sending a job directly to a printer.
# Then we suddenly need the unique name. So in order to not have to mess up all the other code, we save a mapping.
self._printer_uuid_to_unique_name_mapping[data["uuid"]] = data["unique_name"]
definitions = ContainerRegistry.getInstance().findDefinitionContainers(name = data["machine_variant"])
if not definitions:
Logger.log("w", "Unable to find definition for machine variant %s", data["machine_variant"])
return
machine_definition = definitions[0]
printer.updateName(data["friendly_name"])
printer.updateKey(data["uuid"])
printer.updateType(data["machine_variant"])
if data["status"] != "unreachable":
self._application.getDiscoveredPrintersModel().updateDiscoveredPrinter(data["ip_address"],
name = data["friendly_name"],
machine_type = data["machine_variant"])
# Do not store the build plate information that comes from connect if the current printer has not build plate information
if "build_plate" in data and machine_definition.getMetaDataEntry("has_variant_buildplates", False):
printer.updateBuildplate(data["build_plate"]["type"])
if not data["enabled"]:
printer.updateState("disabled")
else:
printer.updateState(data["status"])
for index in range(0, self._number_of_extruders):
extruder = printer.extruders[index]
try:
extruder_data = data["configuration"][index]
except IndexError:
break
extruder.updateHotendID(extruder_data.get("print_core_id", ""))
material_data = extruder_data["material"]
if extruder.activeMaterial is None or extruder.activeMaterial.guid != material_data["guid"]:
material = self._createMaterialOutputModel(material_data)
extruder.updateActiveMaterial(material)
