def macaddrs_command(args):
"""get mac addresses from a cluster or host"""
args.all_nodes = False
tftp = get_tftp(args)
nodes = get_nodes(args, tftp)
if not args.quiet:
print "Getting MAC addresses..."
results, errors = run_command(args, nodes, "get_fabric_macaddrs")
for node in nodes:
if node in results:
print "MAC addresses from %s" % node.ip_address
for node_id in sorted(results[node]):
for port in results[node][node_id]:
for mac_address in results[node][node_id][port]:
print "Node %s, Port %i: %s" % (node_id, port,
mac_address)
print
if not args.quiet and errors:
print "Some errors occured during the command.\n"
return len(errors) == 0
def macaddrs_command(args):
"""get mac addresses from a cluster or host"""
args.all_nodes = False
tftp = get_tftp(args)
nodes = get_nodes(args, tftp)
if not args.quiet:
print "Getting MAC addresses..."
results, errors = run_command(args, nodes, "get_fabric_macaddrs")
for node in nodes:
if node in results:
print "MAC addresses from %s" % node.ip_address
for node_id in sorted(results[node]):
for port in results[node][node_id]:
for mac_address in results[node][node_id][port]:
print "Node %s, Port %i: %s" % (node_id, port,
mac_address)
print
if not args.quiet and errors:
print "Some errors occured during the command.\n"
return len(errors) == 0
def ipmitool_command(args):
"""run arbitrary ipmitool command"""
if args.lanplus:
ipmitool_args = ['-I', 'lanplus'] + args.ipmitool_args
else:
ipmitool_args = args.ipmitool_args
tftp = get_tftp(args)
nodes = get_nodes(args, tftp)
if not args.quiet:
print "Running IPMItool command..."
results, errors = run_command(args, nodes, "ipmitool_command",
ipmitool_args)
# Print results
node_strings = get_node_strings(args, results, justify=False)
for node in nodes:
if node in results and results[node] != "":
print "[ IPMItool output from %s ]" % node_strings[node]
print results[node]
print
if not args.quiet and errors:
print "Some errors occured during the command.\n"
return len(errors) > 0
def ipmitool_command(args):
"""run arbitrary ipmitool command"""
if args.lanplus:
ipmitool_args = ['-I', 'lanplus'] + args.ipmitool_args
else:
ipmitool_args = args.ipmitool_args
tftp = get_tftp(args)
nodes = get_nodes(args, tftp)
if not args.quiet:
print "Running IPMItool command..."
results, errors = run_command(args, nodes, "ipmitool_command",
ipmitool_args)
# Print results
node_strings = get_node_strings(args, results, justify=False)
for node in nodes:
if node in results and results[node] != "":
print "[ IPMItool output from %s ]" % node_strings[node]
print results[node]
print
if not args.quiet and errors:
print "Some errors occured during the command.\n"
return len(errors) > 0
def fwinfo_command(args):
"""print firmware info"""
tftp = get_tftp(args)
nodes = get_nodes(args, tftp)
if not args.quiet:
print "Getting firmware info..."
results, errors = run_command(args, nodes, "get_firmware_info")
node_strings = get_node_strings(args, results, justify=False)
for node in nodes:
if node in results:
print "[ Firmware info for %s ]" % node_strings[node]
for partition in results[node]:
print "Partition : %s" % partition.partition
print "Type : %s" % partition.type
print "Offset : %s" % partition.offset
print "Size : %s" % partition.size
print "Priority : %s" % partition.priority
print "Daddr : %s" % partition.daddr
print "Flags : %s" % partition.flags
print "Version : %s" % partition.version
print "In Use : %s" % partition.in_use
print
if not args.quiet and errors:
print "Some errors occured during the command.\n"
return len(errors) > 0
def info_basic_command(args):
"""Print basic info"""
tftp = get_tftp(args)
nodes = get_nodes(args, tftp)
if not args.quiet:
print "Getting info..."
results, errors = run_command(args, nodes, "get_versions")
# Print results
node_strings = get_node_strings(args, results, justify=False)
for node in nodes:
if node in results:
result = results[node]
# Get mappings between attributes and formatted strings
components = COMPONENTS
print "[ Info from %s ]" % node_strings[node]
print "Hardware version : %s" % result.hardware_version
print "Firmware version : %s" % result.firmware_version
# var is the variable, string is the printable string of var
for var, string in components:
if hasattr(result, var):
version = getattr(result, var)
print "%s: %s" % (string.ljust(20), version)
print
if not args.quiet and errors:
print "Some errors occured during the command.\n"
return len(errors) > 0
def fwinfo_command(args):
"""print firmware info"""
tftp = get_tftp(args)
nodes = get_nodes(args, tftp)
if not args.quiet:
print "Getting firmware info..."
results, errors = run_command(args, nodes, "get_firmware_info")
node_strings = get_node_strings(args, results, justify=False)
for node in nodes:
if node in results:
print "[ Firmware info for %s ]" % node_strings[node]
for partition in results[node]:
print "Partition : %s" % partition.partition
print "Type : %s" % partition.type
print "Offset : %s" % partition.offset
print "Size : %s" % partition.size
print "Priority : %s" % partition.priority
print "Daddr : %s" % partition.daddr
print "Flags : %s" % partition.flags
print "Version : %s" % partition.version
print "In Use : %s" % partition.in_use
print
if not args.quiet and errors:
print "Some errors occured during the command.\n"
return len(errors) > 0
def info_basic_command(args):
"""Print basic info"""
tftp = get_tftp(args)
nodes = get_nodes(args, tftp)
if not args.quiet:
print "Getting info..."
results, errors = run_command(args, nodes, "get_versions")
# Print results
node_strings = get_node_strings(args, results, justify=False)
for node in nodes:
if node in results:
result = results[node]
# Get mappings between attributes and formatted strings
components = COMPONENTS
print "[ Info from %s ]" % node_strings[node]
print "Hardware version : %s" % result.hardware_version
print "Firmware version : %s" % result.firmware_version
# var is the variable, string is the printable string of var
for var, string in components:
if hasattr(result, var):
version = getattr(result, var)
print "%s: %s" % (string.ljust(20), version)
print
if not args.quiet and errors:
print "Some errors occured during the command.\n"
return len(errors) > 0
def sensor_command(args):
"""read sensor values from a cluster or host"""
tftp = get_tftp(args)
nodes = get_nodes(args, tftp)
if not args.quiet:
print "Getting sensor readings..."
results, errors = run_command(args, nodes, "get_sensors",
args.sensor_name)
sensors = {}
for node in nodes:
if node in results:
for sensor_name, sensor in results[node].iteritems():
if not sensor_name in sensors:
sensors[sensor_name] = []
reading = sensor.sensor_reading.replace("(+/- 0) ", "")
try:
value = float(reading.split()[0])
suffix = reading.lstrip("%f " % value)
sensors[sensor_name].append((node, value, suffix))
except ValueError:
sensors[sensor_name].append((node, reading, ""))
node_strings = get_node_strings(args, results, justify=True)
if node_strings:
jsize = len(node_strings.itervalues().next())
for sensor_name, readings in sensors.iteritems():
print sensor_name
for node, reading, suffix in readings:
try:
print "%s: %.2f %s" % (node_strings[node], reading, suffix)
except TypeError:
print "%s: %s" % (node_strings[node], reading)
try:
if all(suffix == x[2] for x in readings):
minimum = min(x[1] for x in readings)
maximum = max(x[1] for x in readings)
average = sum(x[1] for x in readings) / len(readings)
print "%s: %.2f %s" % ("Minimum".ljust(jsize), minimum, suffix)
print "%s: %.2f %s" % ("Maximum".ljust(jsize), maximum, suffix)
print "%s: %.2f %s" % ("Average".ljust(jsize), average, suffix)
except TypeError:
pass
print
if not args.quiet and errors:
print "Some errors occured during the command.\n"
return len(errors) > 0
def sensor_command(args):
"""read sensor values from a cluster or host"""
tftp = get_tftp(args)
nodes = get_nodes(args, tftp)
if not args.quiet:
print "Getting sensor readings..."
results, errors = run_command(args, nodes, "get_sensors", args.sensor_name)
sensors = {}
for node in nodes:
if node in results:
for sensor_name, sensor in results[node].iteritems():
if not sensor_name in sensors:
sensors[sensor_name] = []
reading = sensor.sensor_reading.replace("(+/- 0) ", "")
try:
value = float(reading.split()[0])
suffix = reading.lstrip("%f " % value)
sensors[sensor_name].append((node, value, suffix))
except ValueError:
sensors[sensor_name].append((node, reading, ""))
node_strings = get_node_strings(args, results, justify=True)
if node_strings:
jsize = len(node_strings.itervalues().next())
for sensor_name, readings in sensors.iteritems():
print sensor_name
for node, reading, suffix in readings:
try:
print "%s: %.2f %s" % (node_strings[node], reading, suffix)
except TypeError:
print "%s: %s" % (node_strings[node], reading)
try:
if all(suffix == x[2] for x in readings):
minimum = min(x[1] for x in readings)
maximum = max(x[1] for x in readings)
average = sum(x[1] for x in readings) / len(readings)
print "%s: %.2f %s" % ("Minimum".ljust(jsize), minimum, suffix)
print "%s: %.2f %s" % ("Maximum".ljust(jsize), maximum, suffix)
print "%s: %.2f %s" % ("Average".ljust(jsize), average, suffix)
except TypeError:
pass
print
if not args.quiet and errors:
print "Some errors occured during the command.\n"
return len(errors) > 0
def mcreset_command(args):
"""reset the management controllers of a cluster or host"""
tftp = get_tftp(args)
nodes = get_nodes(args, tftp)
if not args.quiet:
print 'Sending MC reset command...'
_, errors = run_command(args, nodes, 'mc_reset')
if not args.quiet and not errors:
print 'Command completed successfully.\n'
return len(errors) > 0
def power_command(args):
"""change the power state of a cluster or host"""
tftp = get_tftp(args)
nodes = get_nodes(args, tftp)
if not args.quiet:
print 'Sending power %s command...' % args.power_mode
_, errors = run_command(args, nodes, 'set_power', args.power_mode)
if not args.quiet and not errors:
print 'Command completed successfully.\n'
return len(errors) > 0
def power_policy_command(args):
"""Executes power policy command with args."""
tftp = get_tftp(args)
nodes = get_nodes(args, tftp)
if not args.quiet:
print 'Setting power policy to %s...' % args.policy
_, errors = run_command(args, nodes, 'set_power_policy', args.policy)
if not args.quiet and not errors:
print 'Command completed successfully.\n'
return len(errors) > 0
def mcreset_command(args):
"""reset the management controllers of a cluster or host"""
tftp = get_tftp(args)
nodes = get_nodes(args, tftp)
if not args.quiet:
print 'Sending MC reset command...'
_, errors = run_command(args, nodes, 'mc_reset')
if not args.quiet and not errors:
print 'Command completed successfully.\n'
return len(errors) > 0
def config_reset_command(args):
"""reset to factory default settings"""
tftp = get_tftp(args)
nodes = get_nodes(args, tftp, verify_prompt=True)
if not args.quiet:
print "Sending config reset command..."
_, errors = run_command(args, nodes, "config_reset")
if not args.quiet and not errors:
print "Command completed successfully.\n"
return len(errors) > 0
def power_command(args):
"""change the power state of a cluster or host"""
tftp = get_tftp(args)
nodes = get_nodes(args, tftp)
if not args.quiet:
print 'Sending power %s command...' % args.power_mode
_, errors = run_command(args, nodes, 'set_power', args.power_mode)
if not args.quiet and not errors:
print 'Command completed successfully.\n'
return len(errors) > 0
def power_policy_command(args):
"""Executes power policy command with args."""
tftp = get_tftp(args)
nodes = get_nodes(args, tftp)
if not args.quiet:
print 'Setting power policy to %s...' % args.policy
_, errors = run_command(args, nodes, 'set_power_policy',
args.policy)
if not args.quiet and not errors:
print 'Command completed successfully.\n'
return len(errors) > 0
def config_boot_command(args):
"""set A9 boot order"""
if args.boot_order == ['status']:
return config_boot_status_command(args)
validate_boot_args(args.boot_order)
tftp = get_tftp(args)
nodes = get_nodes(args, tftp)
if not args.quiet:
print "Setting boot order..."
_, errors = run_command(args, nodes, "set_boot_order",
args.boot_order)
if not args.quiet and not errors:
print "Command completed successfully.\n"
return len(errors) > 0
def config_pxe_command(args):
"""set the PXE boot interface"""
if args.interface == "status":
return config_pxe_status_command(args)
validate_pxe_interface(args.interface)
tftp = get_tftp(args)
nodes = get_nodes(args, tftp)
if not args.quiet:
print "Setting pxe interface..."
_, errors = run_command(args, nodes, "set_pxe_interface",
args.interface)
if not args.quiet and not errors:
print "Command completed successfully.\n"
return len(errors) > 0
def ipinfo_command(args):
"""get ip info from a cluster or host"""
args.all_nodes = False
tftp = get_tftp(args)
nodes = get_nodes(args, tftp)
if not args.quiet:
print "Getting IP addresses..."
results, _ = run_command(args, nodes, "get_fabric_ipinfo")
for node in nodes:
if node in results:
print 'IP info from %s' % node.ip_address
for node_id, node_address in sorted(results[node].items()):
print 'Node %s: %s' % (node_id, node_address)
print
return 0
def ipinfo_command(args):
"""get ip info from a cluster or host"""
args.all_nodes = False
tftp = get_tftp(args)
nodes = get_nodes(args, tftp)
if not args.quiet:
print "Getting IP addresses..."
results, _ = run_command(args, nodes, "get_fabric_ipinfo")
for node in nodes:
if node in results:
print 'IP info from %s' % node.ip_address
for node_id, node_address in sorted(results[node].items()):
print 'Node %s: %s' % (node_id, node_address)
print
return 0
def config_boot_status_command(args):
"""Get boot status command."""
tftp = get_tftp(args)
nodes = get_nodes(args, tftp)
if not args.quiet:
print "Getting boot order..."
results, errors = run_command(args, nodes, "get_boot_order")
# Print results
if results:
node_strings = get_node_strings(args, results, justify=True)
print "Boot order"
for node in nodes:
if node in results:
print "%s: %s" % (node_strings[node], ",".join(results[node]))
print
if not args.quiet and errors:
print "Some errors occured during the command.\n"
return len(errors) > 0
def config_pxe_status_command(args):
"""Gets pxe status."""
tftp = get_tftp(args)
nodes = get_nodes(args, tftp)
if not args.quiet:
print "Getting pxe interface..."
results, errors = run_command(args, nodes, "get_pxe_interface")
# Print results
if results:
node_strings = get_node_strings(args, results, justify=True)
print "PXE interface"
for node in nodes:
if node in results:
print "%s: %s" % (node_strings[node], results[node])
print
if not args.quiet and errors:
print "Some errors occured during the command.\n"
return len(errors) > 0
def partition_config_command(args):
"""get partition config from nodes"""
args.all_nodes = False
tftp = get_tftp(args)
nodes = get_nodes(args, tftp)
if not args.quiet:
print "Getting partition config..."
results, errors = run_command(args, nodes, "run_fabric_tftp_command",
"fabric_info_partition_config")
for node in nodes:
if node in results:
print "[ Partition config from %s ]" % node.ip_address
print results[node].strip()
print
if not args.quiet and errors:
print "Some errors occured during the command.\n"
return len(errors) == 0
def ipdiscover_command(args):
"""discover server IP addresses"""
tftp = get_tftp(args)
nodes = get_nodes(args, tftp)
if not args.quiet:
print "Getting server-side IP addresses..."
results, errors = run_command(args, nodes, "get_server_ip", args.interface, args.ipv6, args.aggressive)
if results:
node_strings = get_node_strings(args, results, justify=True)
print "IP addresses (ECME, Server)"
for node in nodes:
if node in results:
print "%s: %s" % (node_strings[node], results[node])
print
if not args.quiet and errors:
print "Some errors occurred during the command."
return len(errors) > 0
def power_policy_status_command(args):
"""Executes the power policy status command with args."""
tftp = get_tftp(args)
nodes = get_nodes(args, tftp)
if not args.quiet:
print 'Getting power policy status...'
results, errors = run_command(args, nodes, 'get_power_policy')
# Print results
if results:
node_strings = get_node_strings(args, results, justify=True)
print 'Power policy status'
for node in nodes:
if node in results:
print '%s: %s' % (node_strings[node], results[node])
print
if not args.quiet and errors:
print 'Some errors occured during the command.\n'
return len(errors) > 0
def power_policy_status_command(args):
"""Executes the power policy status command with args."""
tftp = get_tftp(args)
nodes = get_nodes(args, tftp)
if not args.quiet:
print 'Getting power policy status...'
results, errors = run_command(args, nodes, 'get_power_policy')
# Print results
if results:
node_strings = get_node_strings(args, results, justify=True)
print 'Power policy status'
for node in nodes:
if node in results:
print '%s: %s' % (node_strings[node], results[node])
print
if not args.quiet and errors:
print 'Some errors occured during the command.\n'
return len(errors) > 0
def info_ubootenv_command(args):
"""Print uboot info"""
tftp = get_tftp(args)
nodes = get_nodes(args, tftp)
if not args.quiet:
print "Getting u-boot environment..."
results, errors = run_command(args, nodes, "get_ubootenv")
# Print results
node_strings = get_node_strings(args, results, justify=False)
for node in nodes:
if node in results:
ubootenv = results[node]
print "[ U-Boot Environment from %s ]" % node_strings[node]
for variable in ubootenv.variables:
print "%s=%s" % (variable, ubootenv.variables[variable])
print
if not args.quiet and errors:
print "Some errors occured during the command.\n"
return len(errors) > 0
def partition_config_command(args):
"""get partition config from nodes"""
args.all_nodes = False
tftp = get_tftp(args)
nodes = get_nodes(args, tftp)
if not args.quiet:
print "Getting partition config..."
results, errors = run_command(
args, nodes, "run_fabric_tftp_command", "fabric_info_partition_config"
)
for node in nodes:
if node in results:
print "[ Partition config from %s ]" % node.ip_address
print results[node].strip()
print
if not args.quiet and errors:
print "Some errors occured during the command.\n"
return len(errors) == 0
def info_ubootenv_command(args):
"""Print uboot info"""
tftp = get_tftp(args)
nodes = get_nodes(args, tftp)
if not args.quiet:
print "Getting u-boot environment..."
results, errors = run_command(args, nodes, "get_ubootenv")
# Print results
node_strings = get_node_strings(args, results, justify=False)
for node in nodes:
if node in results:
ubootenv = results[node]
print "[ U-Boot Environment from %s ]" % node_strings[node]
for variable in ubootenv.variables:
print "%s=%s" % (variable, ubootenv.variables[variable])
print
if not args.quiet and errors:
print "Some errors occured during the command.\n"
return len(errors) > 0
def ipdiscover_command(args):
"""discover server IP addresses"""
tftp = get_tftp(args)
nodes = get_nodes(args, tftp)
if not args.quiet:
print 'Getting server-side IP addresses...'
results, errors = run_command(args, nodes, 'get_server_ip', args.interface,
args.ipv6, args.aggressive)
if results:
node_strings = get_node_strings(args, results, justify=True)
print 'IP addresses (ECME, Server)'
for node in nodes:
if node in results:
print '%s: %s' % (node_strings[node], results[node])
print
if not args.quiet and errors:
print 'Some errors occurred during the command.'
return len(errors) > 0
def fwupdate_command(args):
"""update firmware on a cluster or host"""
def do_update():
""" Do a single firmware check+update. Returns True on failure. """
if not args.force:
if not args.quiet:
print "Checking hosts..."
_, errors = run_command(args, nodes, "_check_firmware",
package, args.partition, args.priority)
if errors:
print "ERROR: Firmware update aborted."
return True
if not args.quiet:
print "Updating firmware..."
_, errors = run_command(args, nodes, "update_firmware", package,
args.partition, args.priority)
if errors:
print "ERROR: Firmware update failed."
return True
return False
def do_reset():
""" Reset and wait. Returns True on failure. """
if not args.quiet:
print "Checking ECME versions..."
results, errors = run_command(args, nodes, "get_versions")
if errors:
print "ERROR: MC reset aborted. Backup partitions not updated."
return True
for result in results.values():
version = result.ecme_version.lstrip("v")
if parse_version(version) < parse_version("1.2.0"):
print "ERROR: MC reset is unsafe on ECME version v%s" % version
print "Please power cycle the system and start a new fwupdate."
return True
if not args.quiet:
print "Resetting nodes..."
results, errors = run_command(args, nodes, "mc_reset", True)
if errors:
print "ERROR: MC reset failed. Backup partitions not updated."
return True
return False
if args.image_type == "PACKAGE":
package = FirmwarePackage(args.filename)
else:
try:
simg = None
if args.force_simg:
simg = False
elif args.skip_simg:
simg = True
image = Image(args.filename, args.image_type, simg, args.daddr,
args.skip_crc32, args.fw_version)
package = FirmwarePackage()
package.images.append(image)
except ValueError as err:
print "ERROR: %s" % err
return True
if not args.all_nodes:
if args.force:
print(
'WARNING: Updating firmware without --all-nodes' +
' is dangerous.'
)
else:
if not prompt_yes(
'WARNING: Updating firmware without ' +
'--all-nodes is dangerous. Continue?'
):
return 1
tftp = get_tftp(args)
nodes = get_nodes(args, tftp, verify_prompt=True)
errors = do_update()
if args.full and not errors:
errors = do_reset()
if not errors:
errors = do_update()
if not args.quiet and not errors:
print "Command completed successfully.\n"
return errors
def tspackage_command(args):
"""Get information pertaining to each node.
This includes:
Version info (like cxmanage info)
MAC addresses
Sensor readings
Sensor data records
Firmware info
Boot order
SELs (System Event Logs),
Depth charts
Routing Tables
This data will be written to a set of files. Each node will get its own
file. All of these files will be archived and saved to the user's current
directory.
Internally, this command is called from:
~/virtual_testenv/workspace/cx_manage_util/scripts/cxmanage
"""
tftp = get_tftp(args)
nodes = get_nodes(args, tftp)
# Make a temporary directory to store the node information files
original_dir = os.getcwd()
temp_dir = tempfile.mkdtemp()
os.chdir(temp_dir)
tspackage_dir = "tspackage.%s" % time.strftime("%Y%m%d%H%M%S")
os.mkdir(tspackage_dir)
os.chdir(tspackage_dir)
quiet = args.quiet
write_client_info()
if not quiet:
print("Getting version information...")
write_version_info(args, nodes)
if not quit:
print("Getting LAN information...")
write_lan_info(args, nodes)
if not quiet:
print("Getting boot order...")
write_boot_order(args, nodes)
if not quiet:
print("Getting MAC addresses...")
write_mac_addrs(args, nodes)
if not quiet:
print("Getting sensor information...")
write_sensor_info(args, nodes)
if not quiet:
print("Getting firmware information...")
write_fwinfo(args, nodes)
if not quiet:
print("Getting system event logs...")
write_sel(args, nodes)
if not quiet:
print("Getting depth charts...")
write_depth_chart(args, nodes)
if not quiet:
print("Getting routing tables...")
write_routing_table(args, nodes)
if not quiet:
print("Getting serial log...")
write_serial_log(args, nodes)
if not quiet:
print("Getting crash log...")
write_crash_log(args, nodes)
# Archive the files
archive(os.getcwd(), original_dir)
# The original files are already archived, so we can delete them.
shutil.rmtree(temp_dir)
def eepromupdate_command(args):
"""Updates the EEPROM's on a cluster or host"""
def validate_config():
"""Makes sure the system type is applicable to EEPROM updates"""
for node in nodes:
if('Dual Node' not in node.get_versions().hardware_version):
print 'ERROR: eepromupdate is only valid on TerraNova systems'
return True
return False
def validate_images():
"""Makes sure all the necessary images have been provided"""
if(args.eeprom_location == 'node'):
for node in nodes:
node_hw_ver = node.get_versions().hardware_version
if('Uplink' in node_hw_ver):
image = 'dual_uplink_node_%s' % (node.node_id % 4)
else:
image = 'dual_node_%s' % (node.node_id % 4)
if(not [img for img in args.images if image in img]):
print 'ERROR: no valid image for node %s' % node.node_id
return True
else:
image = args.images[0]
if('tn_storage.single_slot' not in image):
print 'ERROR: %s is an invalid image for slot EEPROM' % image
return True
return False
def do_update():
"""Updates the EEPROM images"""
if(args.eeprom_location == 'node'):
for node in nodes:
node_hw_ver = node.get_versions().hardware_version
if('Uplink' in node_hw_ver):
needed_image = 'dual_uplink_node_%s' % (node.node_id % 4)
else:
needed_image = 'dual_node_%s' % (node.node_id % 4)
image = [img for img in args.images if needed_image in img][0]
print 'Updating node EEPROM on node %s' % node.node_id
if(args.verbose):
print ' %s' % image
try:
node.update_node_eeprom(image)
except Exception as err:
print 'ERROR: %s' % str(err)
return True
print '' # for readability
else:
image = args.images[0]
# First node in every slot gets the slot image
slot_nodes = [node for node in nodes if node.node_id % 4 == 0]
_, errors = run_command(
args, slot_nodes, "update_slot_eeprom", image
)
if(errors):
print 'ERROR: EEPROM update failed'
return True
return False
if not args.all_nodes:
if args.force:
print(
'WARNING: Updating EEPROM without --all-nodes' +
' is dangerous.'
)
else:
if not prompt_yes(
'WARNING: Updating EEPROM without ' +
'--all-nodes is dangerous. Continue?'
):
return 1
tftp = get_tftp(args)
nodes = get_nodes(args, tftp, verify_prompt=True)
errors = validate_config()
if(not errors):
errors = validate_images()
if(not errors):
errors = do_update()
if not args.quiet and not errors:
print "Command completed successfully."
print "A power cycle is required for the update to take effect.\n"
return errors
def tspackage_command(args):
"""Get information pertaining to each node.
This includes:
Version info (like cxmanage info)
MAC addresses
Sensor readings
Sensor data records
Firmware info
Boot order
SELs (System Event Logs),
Depth charts
Routing Tables
This data will be written to a set of files. Each node will get its own
file. All of these files will be archived and saved to the user's current
directory.
Internally, this command is called from:
~/virtual_testenv/workspace/cx_manage_util/scripts/cxmanage
"""
tftp = get_tftp(args)
nodes = get_nodes(args, tftp)
# Make a temporary directory to store the node information files
original_dir = os.getcwd()
temp_dir = tempfile.mkdtemp()
os.chdir(temp_dir)
tspackage_dir = "tspackage.%s" % time.strftime("%Y%m%d%H%M%S")
os.mkdir(tspackage_dir)
os.chdir(tspackage_dir)
quiet = args.quiet
write_client_info()
if not quiet:
print("Getting version information...")
write_version_info(args, nodes)
if not quit:
print("Getting LAN information...")
write_lan_info(args, nodes)
if not quiet:
print("Getting boot order...")
write_boot_order(args, nodes)
if not quiet:
print("Getting MAC addresses...")
write_mac_addrs(args, nodes)
if not quiet:
print("Getting sensor information...")
write_sensor_info(args, nodes)
if not quiet:
print("Getting firmware information...")
write_fwinfo(args, nodes)
if not quiet:
print("Getting system event logs...")
write_sel(args, nodes)
if not quiet:
print("Getting depth charts...")
write_depth_chart(args, nodes)
if not quiet:
print("Getting routing tables...")
write_routing_table(args, nodes)
if not quiet:
print("Getting serial log...")
write_serial_log(args, nodes)
if not quiet:
print("Getting crash log...")
write_crash_log(args, nodes)
# Archive the files
archive(os.getcwd(), original_dir)
# The original files are already archived, so we can delete them.
shutil.rmtree(temp_dir)
def fwupdate_command(args):
"""update firmware on a cluster or host"""
def do_update():
""" Do a single firmware check+update. Returns True on failure. """
if not args.force:
if not args.quiet:
print "Checking hosts..."
_, errors = run_command(args, nodes, "_check_firmware", package,
args.partition, args.priority)
if errors:
print "ERROR: Firmware update aborted."
return True
if not args.quiet:
print "Updating firmware..."
_, errors = run_command(args, nodes, "update_firmware", package,
args.partition, args.priority)
if errors:
print "ERROR: Firmware update failed."
return True
return False
def do_reset():
""" Reset and wait. Returns True on failure. """
if not args.quiet:
print "Checking ECME versions..."
results, errors = run_command(args, nodes, "get_versions")
if errors:
print "ERROR: MC reset aborted. Backup partitions not updated."
return True
for result in results.values():
version = result.ecme_version.lstrip("v")
if parse_version(version) < parse_version("1.2.0"):
print "ERROR: MC reset is unsafe on ECME version v%s" % version
print "Please power cycle the system and start a new fwupdate."
return True
if not args.quiet:
print "Resetting nodes..."
results, errors = run_command(args, nodes, "mc_reset", True)
if errors:
print "ERROR: MC reset failed. Backup partitions not updated."
return True
return False
if args.image_type == "PACKAGE":
package = FirmwarePackage(args.filename)
else:
try:
simg = None
if args.force_simg:
simg = False
elif args.skip_simg:
simg = True
image = Image(args.filename, args.image_type, simg, args.daddr,
args.skip_crc32, args.fw_version)
package = FirmwarePackage()
package.images.append(image)
except ValueError as err:
print "ERROR: %s" % err
return True
if not args.all_nodes:
if args.force:
print('WARNING: Updating firmware without --all-nodes' +
' is dangerous.')
else:
if not prompt_yes('WARNING: Updating firmware without ' +
'--all-nodes is dangerous. Continue?'):
return 1
tftp = get_tftp(args)
nodes = get_nodes(args, tftp, verify_prompt=True)
errors = do_update()
if args.full and not errors:
errors = do_reset()
if not errors:
errors = do_update()
if not args.quiet and not errors:
print "Command completed successfully.\n"
return errors