def _format_subdict(dict_, current_indent=0):
check.dict_param(dict_, "dict_", key_type=str)
printer = IndentingStringIoPrinter(indent_level=2, current_indent=current_indent)
printer.line("{")
n_elements = len(dict_)
for i, key in enumerate(sorted(dict_, key=lambda x: x[0])):
value = dict_[key]
with printer.with_indent():
formatted_value = (
_format_item(value, current_indent=printer.current_indent)
.lstrip(" ")
.rstrip("\n")
)
printer.line(
"{key}: {formatted_value}{comma}".format(
key=key,
formatted_value=formatted_value,
comma="," if i != n_elements - 1 else "",
)
)
printer.line("}")
return printer.read()
def _format_subdict(dict_, current_indent=0):
check.dict_param(dict_, 'dict_', key_type=str)
printer = IndentingStringIoPrinter(indent_level=2, current_indent=current_indent)
printer.line('{')
n_elements = len(dict_)
for i, key in enumerate(sorted(dict_, key=lambda x: x[0])):
value = dict_[key]
with printer.with_indent():
formatted_value = (
_format_item(value, current_indent=printer.current_indent)
.lstrip(' ')
.rstrip('\n')
)
printer.line(
'{key}: {formatted_value}{comma}'.format(
key=key,
formatted_value=formatted_value,
comma=',' if i != n_elements - 1 else '',
)
)
printer.line('}')
return printer.read()
def _format_config_sublist(config, current_indent=0):
printer = IndentingStringIoPrinter(indent_level=2,
current_indent=current_indent)
printer.line('[')
n_elements = len(config)
for i, value in enumerate(config):
with printer.with_indent():
formatted_value = (_format_config_item(
value, current_indent=printer.current_indent).lstrip(
' ').rstrip('\n'))
printer.line('{formatted_value}{comma}'.format(
formatted_value=formatted_value,
comma=',' if i != n_elements - 1 else ''))
printer.line(']')
return printer.read()
def test_indenting_block_printer_block_printing():
with IndentingStringIoPrinter(indent_level=4) as printer:
printer.comment(LOREM_IPSUM)
with printer.with_indent():
printer.block(LOREM_IPSUM)
with printer.with_indent():
printer.comment(LOREM_IPSUM)
assert printer.read() == FORMATTED_LOREM
def _format_item(dict_, current_indent=0):
printer = IndentingStringIoPrinter(indent_level=2, current_indent=current_indent)
if isinstance(dict_, dict):
return _format_subdict(dict_, printer.current_indent)
elif isinstance(dict_, list):
return _format_sublist(dict_, printer.current_indent)
elif isinstance(dict_, bool):
return repr(dict_).lower()
else:
return repr(dict_).replace("'", '"')
def _format_sublist(dict_, current_indent=0):
printer = IndentingStringIoPrinter(indent_level=2, current_indent=current_indent)
printer.line("[")
n_elements = len(dict_)
for i, value in enumerate(dict_):
with printer.with_indent():
formatted_value = (
_format_item(value, current_indent=printer.current_indent)
.lstrip(" ")
.rstrip("\n")
)
printer.line(
"{formatted_value}{comma}".format(
formatted_value=formatted_value, comma="," if i != n_elements - 1 else ""
)
)
printer.line("]")
return printer.read()
def _format_config_item(config, current_indent=0):
printer = IndentingStringIoPrinter(indent_level=2,
current_indent=current_indent)
if isinstance(config, dict):
return _format_config_subdict(config, printer.current_indent)
elif isinstance(config, list):
return _format_config_sublist(config, printer.current_indent)
elif isinstance(config, bool):
return repr(config).lower()
else:
return repr(config).replace('\'', '"')
def _make_dag_description(pipeline_name, env_config):
with IndentingStringIoPrinter() as printer:
printer.block(
'\'\'\'Editable scaffolding autogenerated by dagster-airflow from pipeline '
'{pipeline_name} with config:'.format(pipeline_name=pipeline_name))
printer.blank_line()
with printer.with_indent():
for line in dump(env_config).split('\n'):
printer.line(line)
printer.blank_line()
return printer.read()
def construct_scaffolded_file_contents(module_name, pipeline_name,
environment_dict):
yesterday = datetime.now() - timedelta(1)
printer = IndentingStringIoPrinter(indent_level=4)
printer.line('\'\'\'')
printer.line(
'The airflow DAG scaffold for {module_name}.{pipeline_name}'.format(
module_name=module_name, pipeline_name=pipeline_name))
printer.blank_line()
printer.line(
'Note that this docstring must contain the strings "airflow" and "DAG" for'
)
printer.line('Airflow to properly detect it as a DAG')
printer.line('See: http://bit.ly/307VMum')
printer.line('\'\'\'')
printer.line('import datetime')
printer.blank_line()
printer.line('import yaml')
printer.line('from dagster_airflow.factory import make_airflow_dag')
printer.blank_line()
printer.line('#' * 80)
printer.comment('#')
printer.comment(
'# This environment is auto-generated from your configs and/or presets'
)
printer.comment('#')
printer.line('#' * 80)
printer.line('ENVIRONMENT = \'\'\'')
printer.line(yaml.dump(environment_dict, default_flow_style=False))
printer.line('\'\'\'')
printer.blank_line()
printer.blank_line()
printer.line('#' * 80)
printer.comment('#')
printer.comment(
'# NOTE: these arguments should be edited for your environment')
printer.comment('#')
printer.line('#' * 80)
printer.line('DEFAULT_ARGS = {')
with printer.with_indent():
printer.line("'owner': 'airflow',")
printer.line("'depends_on_past': False,")
# start date -> yesterday
printer.line("'start_date': datetime.datetime(%s, %d, %d)," %
(yesterday.year, yesterday.month, yesterday.day))
printer.line("'email': ['*****@*****.**'],")
printer.line("'email_on_failure': False,")
printer.line("'email_on_retry': False,")
printer.line('}')
printer.blank_line()
printer.line('dag, tasks = make_airflow_dag(')
with printer.with_indent():
printer.comment('NOTE: you must ensure that {module_name} is '.format(
module_name=module_name))
printer.comment(
'installed or available on sys.path, otherwise, this import will fail.'
)
printer.line(
'module_name=\'{module_name}\','.format(module_name=module_name))
printer.line('pipeline_name=\'{pipeline_name}\','.format(
pipeline_name=pipeline_name))
printer.line("environment_dict=yaml.safe_load(ENVIRONMENT),")
printer.line(
"dag_kwargs={'default_args': DEFAULT_ARGS, 'max_active_runs': 1}")
printer.line(')')
return printer.read().encode()
def construct_scaffolded_file_contents(module_name, job_name, run_config):
yesterday = datetime.now() - timedelta(1)
printer = IndentingStringIoPrinter(indent_level=4)
printer.line("'''")
printer.line(
"The airflow DAG scaffold for {module_name}.{job_name}".format(
module_name=module_name, job_name=job_name))
printer.blank_line()
printer.line(
'Note that this docstring must contain the strings "airflow" and "DAG" for'
)
printer.line("Airflow to properly detect it as a DAG")
printer.line("See: http://bit.ly/307VMum")
printer.line("'''")
printer.line("import datetime")
printer.blank_line()
printer.line("import yaml")
printer.line("from dagster_airflow.factory import make_airflow_dag")
printer.blank_line()
printer.line("#" * 80)
printer.comment("#")
printer.comment(
"# This environment is auto-generated from your configs and/or presets"
)
printer.comment("#")
printer.line("#" * 80)
printer.line("ENVIRONMENT = '''")
printer.line(yaml.dump(run_config, default_flow_style=False))
printer.line("'''")
printer.blank_line()
printer.blank_line()
printer.line("#" * 80)
printer.comment("#")
printer.comment(
"# NOTE: these arguments should be edited for your environment")
printer.comment("#")
printer.line("#" * 80)
printer.line("DEFAULT_ARGS = {")
with printer.with_indent():
printer.line("'owner': 'airflow',")
printer.line("'depends_on_past': False,")
# start date -> yesterday
printer.line("'start_date': datetime.datetime(%s, %d, %d)," %
(yesterday.year, yesterday.month, yesterday.day))
printer.line("'email': ['*****@*****.**'],")
printer.line("'email_on_failure': False,")
printer.line("'email_on_retry': False,")
printer.line("}")
printer.blank_line()
printer.line("dag, tasks = make_airflow_dag(")
with printer.with_indent():
printer.comment(f"NOTE: you must ensure that {module_name} is ")
printer.comment(
"installed or available on sys.path, otherwise, this import will fail."
)
printer.line(f"module_name='{module_name}',")
printer.line(f"job_name='{job_name}',")
printer.line("run_config=yaml.safe_load(ENVIRONMENT),")
printer.line(
"dag_kwargs={'default_args': DEFAULT_ARGS, 'max_active_runs': 1}")
printer.line(")")
return printer.read().encode("utf-8")
def scaffold(dag_name, module_name, pipeline_name, output_path, environment_file):
'''Creates a DAG file for a specified dagster pipeline'''
# Validate output path
if not output_path:
raise Exception('You must specify --output-path or set AIRFLOW_HOME to use this script.')
# We construct the YAML environment and then put it directly in the DAG file
environment_yaml = _construct_yml(environment_file, dag_name)
printer = IndentingStringIoPrinter(indent_level=4)
printer.line('\'\'\'')
printer.line(
'The airflow DAG scaffold for {module_name}.{pipeline_name}'.format(
module_name=module_name, pipeline_name=pipeline_name
)
)
printer.blank_line()
printer.line('Note that this docstring must contain the strings "airflow" and "DAG" for')
printer.line('Airflow to properly detect it as a DAG')
printer.line('See: http://bit.ly/307VMum')
printer.line('\'\'\'')
printer.line('import datetime')
printer.line('import yaml')
printer.blank_line()
printer.line('from dagster_airflow.factory import make_airflow_dag')
printer.blank_line()
printer.blank_line()
printer.line('ENVIRONMENT = \'\'\'')
printer.line(environment_yaml)
printer.line('\'\'\'')
printer.blank_line()
printer.blank_line()
printer.comment('NOTE: these arguments should be edited for your environment')
printer.line('DEFAULT_ARGS = {')
with printer.with_indent():
printer.line("'owner': 'airflow',")
printer.line("'depends_on_past': False,")
printer.line("'start_date': datetime.datetime(2019, 5, 7),")
printer.line("'email': ['*****@*****.**'],")
printer.line("'email_on_failure': False,")
printer.line("'email_on_retry': False,")
printer.line('}')
printer.blank_line()
printer.line('dag, tasks = make_airflow_dag(')
with printer.with_indent():
printer.comment(
'NOTE: you must ensure that {module_name} is installed or available on sys.path, '
'otherwise, this import will fail.'.format(module_name=module_name)
)
printer.line('module_name=\'{module_name}\','.format(module_name=module_name))
printer.line('pipeline_name=\'{pipeline_name}\','.format(pipeline_name=pipeline_name))
printer.line("environment_dict=yaml.load(ENVIRONMENT),")
printer.line("dag_kwargs={'default_args': DEFAULT_ARGS, 'max_active_runs': 1}")
printer.line(')')
# Ensure output_path/dags exists
dags_path = os.path.join(output_path, 'dags')
if not os.path.isdir(dags_path):
os.makedirs(dags_path)
dag_file = os.path.join(output_path, 'dags', dag_name + '.py')
with open(dag_file, 'wb') as f:
f.write(printer.read().encode())
def test_indenting_block_printer_context_management():
with IndentingStringIoPrinter() as printer:
printer.line("Hello, world!")
assert printer.read() == "Hello, world!\n"