def test_procedure(TESTNAME,testDict):
d = Dialog(dialog="dialog")
d.set_background_title("Testing: " + TESTNAME)
if not operator_query_instructions(TESTNAME):
return False
try:
ht.init()
# Acquire the Hall Effect Apparatus
scan = ht.acquire(0x16d0,0x0c9b)
except Exception:
d.msgbox("Data-chan initialization failed")
return False
# Start Measuring
ht.enable(scan)
ht.set_channel_gain(scan, 3, 5)
d.gauge_start("Acquiring DAC Voltage VS Hall Vr measures")
measures = {}
raw_current_codes = range (int(2000), int(2100))
# count from 0 to the total number of steps
for i in range(len(raw_current_codes)):
ht.set_current_raw(scan,raw_current_codes[i])
#pop all old measures
while(ht.pop_measure(scan) != None ):
pass
time.sleep(0.150)
measures[i] = ht.pop_measure(scan)
d.gauge_update(int(float(i) / float(len(raw_current_codes)) * 100.0))
if measures[i] is not None:
measures[i]["raw_current_code"] = raw_current_codes[i]
d.gauge_stop()
ht.disconnect_device(scan)
ht.deinit()
testResult = compute.compute(testDict["asset_path"],measures,'raw_current_code','ch6')
if(not testResult):
return False
if(not (-0.0014-(-0.0014*0.2)<=testResult['coeff']['slope']<=-0.0014+(-0.0014*0.2))):
return False
return testResult
def test_procedure(TESTNAME, testDict):
####### CONFIG
measures_to_take = 100
d = Dialog(dialog="dialog")
d.set_background_title("Testing: " + TESTNAME)
d.msgbox("Disconnetti la schedina che fa click-click-click")
try:
ht.init()
# Acquire the Hall Effect Apparatus
scan = ht.acquire(0x16d0, 0x0c9b)
except Exception:
d.msgbox("Data-chan initialization failed")
return False
# Start Measuring
ht.enable(scan)
ht.set_channel_gain(scan, 3, 5)
d.gauge_start("Acquiring DAC Voltage VS Current measures")
measures = {}
raw_current_codes = range(int(4095 / 2 - measures_to_take),
int(4095 / 2 + measures_to_take))
# count from 0 to the total number of steps
for i in range(len(raw_current_codes)):
ht.set_current_raw(scan, raw_current_codes[i])
#pop all old measures
while (ht.pop_measure(scan) != None):
pass
time.sleep(0.150)
measures[i] = ht.pop_measure(scan)
d.gauge_update(int(float(i) / float(len(raw_current_codes)) * 100.0))
if measures[i] is not None:
measures[i]["raw_current_code"] = raw_current_codes[i]
d.gauge_stop()
ht.disconnect_device(scan)
ht.deinit()
testResult = compute.compute(testDict["asset_path"], measures,
'raw_current_code', 'ch3')
if (not testResult):
return False
if (not (0.0009 -
(0.0009 * 0.2) <= testResult['coeff']['slope'] <= 0.0009 +
(0.0009 * 0.2))):
return False
return testResult
def test_procedure(TESTNAME,testDict):
d = Dialog(dialog="dialog")
d.set_background_title("Testing: " + TESTNAME)
d.msgbox("Connect the heater and press OK")
try:
ht.init()
# Acquire the Hall Effect Apparatus
scan = ht.acquire(0x16d0, 0x0c9b)
except DataChanDeviceNotFoundOrInaccessibleError:
d.msgbox("Data-chan initialization failed")
return False
# Start Measuring
ht.enable(scan)
#ht.set_channel_gain(scan, 2, 1)
#ht.set_current_fixed(scan, 0.05)
ht.set_heater_state(scan, 255)
#ht.set_channel_gain(scan, 2, 1)
d.gauge_start("Acquiring temperature over Time (with heater on)")
measures = {}
# count from 0 to the total number of steps
for i in range(samples_count):
time.sleep(sleep)
# pop all old measures
while(ht.pop_measure(scan) != None):
pass
time.sleep(0.150)
measures[i] = ht.pop_measure(scan)
if measures[i] is not None:
measures[i]["i"] = i * sleep
d.gauge_update(int(float(i) / samples_count * 100.0))
d.gauge_stop()
print(measures)
ht.disconnect_device(scan)
ht.deinit()
testResult = compute.compute(testDict["asset_path"],measures,'i','ch2')
if(not testResult):
return False
if(not (testResult['coeff']['slope']>=0.0005)):
return False
return testResult
def update():
popped_meas = ht.pop_measure(scan)
if popped_meas is not None:
for key in meas:
meas[key]["data"][:-1] = meas[key]["data"][1:]
meas[key]["data"][-1] = popped_meas[key]
meas[key]["curveobj"].setData(meas[key]["data"])
def test_procedure(TESTNAME,testDict):
d = Dialog(dialog="dialog")
d.set_background_title("Testing: " + TESTNAME)
try:
# Initialize
ht.init()
# Acquire the Hall Effect Apparatus
scan = ht.acquire(0x16d0,0x0c9b)
# Start Measuring
ht.enable(scan)
# Set CC gen
ht.set_current_fixed(scan, 0.01)
# Check that the reported measures are ok
count_correct_meas = 0
for i in range (1,25):
meas = ht.pop_measure(scan)
if meas is not None:
count_correct_meas += 1
d.infobox(str(meas).replace(", ", ",\n"), width=60, height=20)
time.sleep(0.3)
ht.disconnect_device(scan)
ht.deinit()
if count_correct_meas < 20:
d.msgbox("Too many measures were empty! fail", width=60)
return False
# Except problems in conneting to the device or retrieving measures
except Exception as e:
d.msgbox(str(e), width=60)
import traceback
tb = traceback.format_exc()
d.scrollbox(str(tb))
return False
pass
return True
def test_procedure(TESTNAME,testDict):
d = Dialog(dialog="dialog")
d.set_background_title("Testing: " + TESTNAME)
try:
ht.init()
print(1)
# Acquire the Hall Effect Apparatus
scan = ht.acquire(0x16d0,0x0c9b)
print(2)
except Exception:
d.msgbox("Data-chan initialization failed")
return False
# Start Measuring
ht.enable(scan)
ht.set_channel_gain(scan, 2, 5)
d.msgbox("Connect the thermocouple and press ok")
#pop all old measures
while(ht.pop_measure(scan) != None ):
pass
# take an average of the thermocouple voltage
average = 0
for i in range(10):
time.sleep(0.2)
popped_meas = ht.pop_measure(scan)
if popped_meas is not None:
average += popped_meas["ch2"]
average = average / 10
if average <= 2.0:
pass
else:
d.msgbox("termocouple not connected, measured an avg of " + str(average) + " V")
return False
d.msgbox("Disconnect the thermocouple and press ok")
#pop all old measures
while(ht.pop_measure(scan) != None ):
pass
# take an average of the thermocouple voltage
average = 0
for i in range(10):
time.sleep(0.2)
popped_meas = ht.pop_measure(scan)
if popped_meas is not None:
average += popped_meas["ch2"]
average = average / 10
ht.disconnect_device(scan)
ht.deinit()
if average >= 2.0:
pass
else:
d.msgbox("termocouple pullup not triggered, measured an avg of " + str(average) + " V")
return False
return True