def get_datmo_parser():
parser = Parser(prog="datmo")
subparsers = parser.add_subparsers(title="commands", dest="command")
# Project
init_parser = subparsers.add_parser("init", help="initialize project")
init_parser.add_argument("--name", default=None)
init_parser.add_argument("--description", default=None)
version_parser = subparsers.add_parser("version", help="datmo version")
status_parser = subparsers.add_parser("status", help="project status")
cleanup_parser = subparsers.add_parser("cleanup", help="remove project")
# Notebook
notebook_parser = subparsers.add_parser(
"notebook", help="To run jupyter notebook")
notebook_parser.add_argument(
"--gpu",
dest="gpu",
action="store_true",
help="boolean if you want to run using GPUs")
notebook_parser.add_argument(
"--environment-id",
dest="environment_id",
default=None,
help="environment id from environment object")
notebook_parser.add_argument(
"--environment-paths",
dest="environment_paths",
default=None,
action="append",
type=str,
help=
"list of absolute or relative filepaths and/or dirpaths to collect; can specify destination names with '>' (e.g. /path/to/file>hello, /path/to/file2, /path/to/dir>newdir)"
)
notebook_parser.add_argument(
"--mem-limit",
"-m",
dest="mem_limit",
default=None,
type=str,
help=
"maximum amount of memory the notebook environment can use (these options take a positive integer, followed by a suffix of b, k, m, g, to indicate bytes, kilobytes, megabytes, or gigabytes)"
)
notebook_parser.add_argument(
"--data",
dest="data",
default=None,
action="append",
type=str,
help=
"list of absolute or relative filepath and/or dirpaths for data; can specify destination names"
" with '>' (e.g. /path/to/dir, /path/to/dir>newdir, /path/to/file)"
)
# Jupyterlab
jupyterlab_parser = subparsers.add_parser(
"jupyterlab", help="To run jupyterlab")
jupyterlab_parser.add_argument(
"--gpu",
dest="gpu",
action="store_true",
help="boolean if you want to run using GPUs")
jupyterlab_parser.add_argument(
"--environment-id",
dest="environment_id",
default=None,
help="environment id from environment object")
jupyterlab_parser.add_argument(
"--environment-paths",
dest="environment_paths",
default=None,
action="append",
type=str,
help=
"list of absolute or relative filepaths and/or dirpaths to collect; can specify destination names with '>' (e.g. /path/to/file>hello, /path/to/file2, /path/to/dir>newdir)"
)
jupyterlab_parser.add_argument(
"--mem-limit",
"-m",
dest="mem_limit",
default=None,
type=str,
help=
"maximum amount of memory the jupyterlab environment can use (these options take a positive integer, followed by a suffix of b, k, m, g, to indicate bytes, kilobytes, megabytes, or gigabytes)"
)
jupyterlab_parser.add_argument(
"--data",
dest="data",
default=None,
action="append",
type=str,
help=
"list of absolute or relative filepath and/or dirpaths for data; can specify destination names"
" with '>' (e.g. /path/to/dir, /path/to/dir>newdir, /path/to/file)"
)
# Terminal
terminal_parser = subparsers.add_parser("terminal", help="To run terminal")
terminal_parser.add_argument(
"--gpu",
dest="gpu",
action="store_true",
help="boolean if you want to run using GPUs")
terminal_parser.add_argument(
"--environment-id",
dest="environment_id",
default=None,
help="environment id from environment object")
terminal_parser.add_argument(
"--environment-paths",
dest="environment_paths",
default=None,
action="append",
type=str,
help=
"list of absolute or relative filepaths and/or dirpaths to collect; can specify destination names with '>' (e.g. /path/to/file>hello, /path/to/file2, /path/to/dir>newdir)"
)
terminal_parser.add_argument(
"--mem-limit",
"-m",
dest="mem_limit",
default=None,
type=str,
help=
"maximum amount of memory the terminal environment can use (these options take a positive integer, followed by a suffix of b, k, m, g, to indicate bytes, kilobytes, megabytes, or gigabytes)"
)
terminal_parser.add_argument(
"--data",
dest="data",
default=None,
action="append",
type=str,
help=
"list of absolute or relative filepath and/or dirpaths for data; can specify destination names"
" with '>' (e.g. /path/to/dir, /path/to/dir>newdir, /path/to/file)"
)
terminal_parser.add_argument(
"--ports",
"-p",
dest="ports",
default=None,
action="append",
type=str,
help="""
network port mapping during run (e.g. 8888:8888). Left is the host machine port and right
is the environment port available during a run.
""")
# Rstudio
rstudio_parser = subparsers.add_parser(
"rstudio", help="To run Rstudio workspace")
rstudio_parser.add_argument(
"--environment-id",
dest="environment_id",
default=None,
help="environment id from environment object")
rstudio_parser.add_argument(
"--environment-paths",
dest="environment_paths",
default=None,
action="append",
type=str,
help=
"list of absolute or relative filepaths and/or dirpaths to collect; can specify destination names with '>' (e.g. /path/to/file>hello, /path/to/file2, /path/to/dir>newdir)"
)
rstudio_parser.add_argument(
"--mem-limit",
"-m",
dest="mem_limit",
default=None,
type=str,
help=
"maximum amount of memory the rstudio environment can use (these options take a positive integer, followed by a suffix of b, k, m, g, to indicate bytes, kilobytes, megabytes, or gigabytes)"
)
rstudio_parser.add_argument(
"--data",
dest="data",
default=None,
action="append",
type=str,
help=
"list of absolute or relative filepath and/or dirpaths for data; can specify destination names"
" with '>' (e.g. /path/to/dir, /path/to/dir>newdir, /path/to/file)"
)
# Run
run_parser = subparsers.add_parser("run", help="run module")
# run arguments
run_parser.add_argument(
"--gpu",
dest="gpu",
action="store_true",
help="boolean if you want to run using GPUs")
run_parser.add_argument(
"--ports",
"-p",
dest="ports",
default=None,
action="append",
type=str,
help="""
network port mapping during run (e.g. 8888:8888). Left is the host machine port and right
is the environment port available during a run.
""")
run_parser.add_argument(
"--environment-id",
dest="environment_id",
default=None,
help="environment id from environment object")
run_parser.add_argument(
"--environment-paths",
dest="environment_paths",
default=None,
action="append",
type=str,
help=
"list of absolute or relative filepaths and/or dirpaths to collect; can specify destination names with '>' (e.g. /path/to/file>hello, /path/to/file2, /path/to/dir>newdir)"
)
run_parser.add_argument(
"--mem-limit",
"-m",
dest="mem_limit",
default=None,
type=str,
help=
"maximum amount of memory the task environment can use (these options take a positive integer, followed by a suffix of b, k, m, g, to indicate bytes, kilobytes, megabytes, or gigabytes. e.g. 4g)"
)
run_parser.add_argument(
"--interactive",
dest="interactive",
action="store_true",
help="run the environment in interactive mode (keeps STDIN open)")
run_parser.add_argument(
"cmd",
nargs="?",
default=None,
help="command to run within environment")
run_parser.add_argument(
"--data",
dest="data",
default=None,
action="append",
type=str,
help=
"list of absolute or relative filepath and/or dirpaths for data; can specify destination names"
" with '>' (e.g. /path/to/dir, /path/to/dir>newdir, /path/to/file)"
)
# List runs
ls_runs_parser = subparsers.add_parser(
"ls", help="To list all experiment runs")
ls_runs_parser.add_argument(
"--session-id",
dest="session_id",
default=None,
nargs="?",
type=str,
help="pass in the session id to list the tasks in that session")
ls_runs_parser.add_argument(
"--format",
dest="format",
default="table",
help="output format ['table', 'csv']")
ls_runs_parser.add_argument(
"--download",
dest="download",
action="store_true",
help=
"boolean is true if user would like to download. use --download-path to specify a path"
)
ls_runs_parser.add_argument(
"--download-path",
dest="download_path",
default=None,
help=
"checked only if download is specified. saves output to location specified"
)
# Stop runs
stop_run_parser = subparsers.add_parser("stop", help="stop runs")
stop_run_parser.add_argument(
"--id", dest="id", default=None, type=str, help="run id to stop")
stop_run_parser.add_argument(
"--all",
"-a",
dest="all",
action="store_true",
help="stop all datmo runs")
# Delete runs
delete_run_parser = subparsers.add_parser("delete", help="delete runs")
delete_run_parser.add_argument("id", default=None, help="run id to delete")
# Rerun
rerun_parser = subparsers.add_parser(
"rerun", help="To rerun an experiment")
rerun_parser.add_argument("id", help="run id to be rerun")
# Session
session_parser = subparsers.add_parser("session", help="session module")
session_subcommand_parsers = session_parser.add_subparsers(
title="subcommands", dest="subcommand")
session_create = session_subcommand_parsers.add_parser(
"create", help="create session")
session_create.add_argument(
"--name", "-m", dest="name", default="", help="session name")
session_create.add_argument(
"--current",
dest="current",
action="store_false",
help="boolean if you want to switch to this session")
session_update = session_subcommand_parsers.add_parser(
"update", help="update a session")
session_update.add_argument("id", help="id of session to update")
session_update.add_argument(
"--name",
dest="name",
default=None,
help="updated name of the session")
session_delete = session_subcommand_parsers.add_parser(
"delete", help="delete a session by name or id")
session_delete.add_argument(
"name_or_id", help="name or id of session to delete")
session_ls = session_subcommand_parsers.add_parser(
"ls", help="list sessions")
session_ls.add_argument(
"--format",
dest="format",
default="table",
help="output format ['table', 'csv']")
session_ls.add_argument(
"--download",
dest="download",
action="store_true",
help=
"boolean is true if user would like to download. use --download-path to specify a path"
)
session_ls.add_argument(
"--download-path",
dest="download_path",
default=None,
help=
"checked only if download is specified. saves output to location specified"
)
session_select = session_subcommand_parsers.add_parser(
"select", help="select a session")
session_select.add_argument(
"name_or_id", help="name or id of session to select")
# Environment
environment_parser = subparsers.add_parser(
"environment", help="environment module")
environment_subcommand_parsers = environment_parser.add_subparsers(
title="subcommands", dest="subcommand")
environment_setup = environment_subcommand_parsers.add_parser(
"setup",
help=
"setup environment adds a predefined supported environment into your project environment directory"
)
environment_setup.add_argument(
"--name",
dest="name",
default=None,
type=str,
help=
"name of environment to be used for environment (e.g. my-new-environment). if none is given, "
"a prompt will present the supported names")
environment_setup.add_argument(
"--type",
dest="type",
default=None,
type=str,
help=
"type of environment to be used for environment (e.g. cpu). if none is given, a prompt "
"will present the supported type")
environment_setup.add_argument(
"--framework",
dest="framework",
default=None,
type=str,
help=
"framework (and relevant libraries) to be used for environment (e.g. data-analytics). if none is given, "
"a prompt will present the supported names")
environment_setup.add_argument(
"--language",
dest="language",
default=None,
type=str,
help=
"language of environment to be used for environment (e.g. py27). if none is given, a prompt will "
"present the supported language for the name and type")
environment_create = environment_subcommand_parsers.add_parser(
"create",
help=
"create environment using the definition paths given, if not looks in your project environment directory, or creates a default"
)
environment_create.add_argument(
"--paths",
dest="paths",
default=None,
action="append",
type=str,
help=
"list of absolute or relative filepaths and/or dirpaths to collect; can specify destination names with '>' (e.g. /path/to/file>hello, /path/to/file2, /path/to/dir>newdir)"
)
environment_create.add_argument(
"--name",
"-n",
dest="name",
default=None,
help="name given to the environment")
environment_create.add_argument(
"--description",
"-d",
dest="description",
default=None,
help="description of environment")
environment_update = environment_subcommand_parsers.add_parser(
"update", help="update an environment by id")
environment_update.add_argument("id", help="environment id to update")
environment_update.add_argument(
"--name", dest="name", help="new name for the environment")
environment_update.add_argument(
"--description",
dest="description",
help="new description for the environment")
environment_delete = environment_subcommand_parsers.add_parser(
"delete", help="delete a environment by id")
environment_delete.add_argument("id", help="id of environment to delete")
environment_ls = environment_subcommand_parsers.add_parser(
"ls", help="list environments")
environment_ls.add_argument(
"--format",
dest="format",
default="table",
help="output format ['table', 'csv']")
environment_ls.add_argument(
"--download",
dest="download",
action="store_true",
help=
"boolean is true if user would like to download. use --download-path to specify a path"
)
environment_ls.add_argument(
"--download-path",
dest="download_path",
default=None,
help=
"checked only if download is specified. saves output to location specified"
)
# Snapshot
snapshot_parser = subparsers.add_parser(
"snapshot",
description=__("argparser", "cli.snapshot.description"),
help="snapshot module")
snapshot_subcommand_parsers = snapshot_parser.add_subparsers(
title="subcommands", dest="subcommand")
snapshot_create = snapshot_subcommand_parsers.add_parser(
"create",
description=__("argparser", "cli.snapshot.create.description"),
help="create a snapshot")
snapshot_create.add_argument(
"--message",
"-m",
dest="message",
default=None,
help="message to describe snapshot")
snapshot_create.add_argument(
"--label",
"-l",
dest="label",
default=None,
help="label snapshots with a category (e.g. best)")
snapshot_create.add_argument(
"--session-id",
dest="session_id",
default=None,
help="user given session id")
snapshot_create.add_argument(
"--run-id",
dest="run_id",
default=None,
help="specify run id to pull information from")
snapshot_create.add_argument(
"--environment-id",
dest="environment_id",
default=None,
help="environment id from environment object")
snapshot_create.add_argument(
"--environment-paths",
dest="environment_paths",
default=None,
action="append",
type=str,
help=
"list of absolute or relative filepaths and/or dirpaths to collect; can specify destination names with '>' (e.g. /path/to/file>hello, /path/to/file2, /path/to/dir>newdir)"
)
# snapshot_create.add_argument(
# "--environment-name",
# dest="environment_name",
# default=None,
# help="name given to the environment")
# snapshot_create.add_argument(
# "--environment-description",
# dest="environment_description",
# default=None,
# help="description of environment")
snapshot_create.add_argument(
"--paths",
dest="paths",
default=None,
action="append",
help=
"list of absolute or relative filepaths and/or dirpaths to collect; can specify destination names with '>' (e.g. /path/to/file>hello, /path/to/file2, /path/to/dir>newdir)"
)
snapshot_create.add_argument(
"--config-filename",
dest="config_filename",
default=None,
help="filename to use to search for configuration JSON")
snapshot_create.add_argument(
"--config-filepath",
dest="config_filepath",
default=None,
help="absolute filepath to use to search for configuration JSON")
snapshot_create.add_argument(
"--config",
"-c",
dest="config",
default=None,
action="append",
type=str,
help="""
provide key, value pair for the config such as key:value, (e.g. accuracy:91.1). Left is the key and
right is the value for it.
""")
snapshot_create.add_argument(
"--stats-filename",
dest="stats_filename",
default=None,
help="filename to use to search for metrics JSON")
snapshot_create.add_argument(
"--stats-filepath",
dest="stats_filepath",
default=None,
help="absolute filepath to use to search for metrics JSON")
snapshot_create.add_argument(
"--stats",
"-s",
dest="stats",
default=None,
action="append",
type=str,
help="""
provide key, value pair for the stats such as key:value, (e.g. accuracy:91.1). Left is the key and
right is the value for it.
""")
snapshot_update = snapshot_subcommand_parsers.add_parser(
"update", help="update a snapshot by id")
snapshot_update.add_argument("id", help="snapshot id to update")
snapshot_update.add_argument(
"--config",
"-c",
dest="config",
default=None,
action="append",
type=str,
help="""
provide key, value pair for the config such as key:value, (e.g. accuracy:91.1). Left is the key and
right is the value for it.
""")
snapshot_update.add_argument(
"--stats",
"-s",
dest="stats",
default=None,
action="append",
type=str,
help="""
provide key, value pair for the stats such as key:value, (e.g. accuracy:91.1). Left is the key and
right is the value for it.
""")
snapshot_update.add_argument(
"--message", dest="message", help="new message for the snapshot")
snapshot_update.add_argument(
"--label", dest="label", help="new label for the snapshot")
snapshot_delete = snapshot_subcommand_parsers.add_parser(
"delete", help="delete a snapshot by id")
snapshot_delete.add_argument("id", help="snapshot id to delete")
snapshot_ls = snapshot_subcommand_parsers.add_parser(
"ls", help="list snapshots")
snapshot_ls.add_argument(
"--session-id",
dest="session_id",
default=None,
help="session id to filter")
snapshot_ls.add_argument(
"--details",
dest="details",
action="store_true",
help="show detailed snapshot information")
snapshot_ls.add_argument(
"--all",
dest="show_all",
action="store_true",
help="show all visible and hidden snapshots")
snapshot_ls.add_argument(
"--format",
dest="format",
default="table",
help="output format ['table', 'csv']")
snapshot_ls.add_argument(
"--download",
dest="download",
action="store_true",
help=
"boolean is true if user would like to download. use --download-path to specify a path"
)
snapshot_ls.add_argument(
"--download-path",
dest="download_path",
default=None,
help=
"checked only if download is specified. saves output to location specified"
)
snapshot_checkout = snapshot_subcommand_parsers.add_parser(
"checkout", help="checkout a snapshot by id")
snapshot_checkout.add_argument("id", help="snapshot id to checkout")
snapshot_diff = snapshot_subcommand_parsers.add_parser(
"diff", help="view diff between 2 snapshots")
snapshot_diff.add_argument("id_1", default=None, help="snapshot id 1")
snapshot_diff.add_argument("id_2", default=None, help="snapshot id 2")
snapshot_inspect = snapshot_subcommand_parsers.add_parser(
"inspect", help="inspect a snapshot by id")
snapshot_inspect.add_argument("id", default=None, help="snapshot id")
return parser
def get_datmo_parser():
parser = Parser(prog="datmo")
subparsers = parser.add_subparsers(title="commands", dest="command")
# Project
init_parser = subparsers.add_parser("init", help="initialize project")
init_parser.add_argument("--name", default=None)
init_parser.add_argument("--description", default=None)
version_parser = subparsers.add_parser("version", help="datmo version")
status_parser = subparsers.add_parser("status", help="project status")
cleanup_parser = subparsers.add_parser("cleanup", help="remove project")
# Session
session_parser = subparsers.add_parser("session", help="session module")
session_subcommand_parsers = session_parser.add_subparsers(
title="subcommands", dest="subcommand")
session_create = session_subcommand_parsers.add_parser(
"create", help="create session")
session_create.add_argument("--name",
"-m",
dest="name",
default="",
help="session name")
session_create.add_argument(
"--current",
dest="current",
action="store_false",
help="boolean if you want to switch to this session")
session_delete = session_subcommand_parsers.add_parser(
"delete", help="delete a session by id")
session_delete.add_argument("--name",
dest="name",
help="name of session to delete")
session_ls = session_subcommand_parsers.add_parser("ls",
help="list sessions")
session_select = session_subcommand_parsers.add_parser(
"select", help="select a session")
session_select.add_argument("--name",
dest="name",
help="name of session to select")
# Snapshot
snapshot_parser = subparsers.add_parser("snapshot",
description=__(
"argparser",
"cli.snapshot.description"))
snapshot_subcommand_parsers = snapshot_parser.add_subparsers(
title="subcommands", dest="subcommand")
snapshot_create = snapshot_subcommand_parsers.add_parser(
"create",
description=__("argparser", "cli.snapshot.create.description"))
snapshot_create.add_argument("--message",
"-m",
dest="message",
default=None,
help="message to describe snapshot")
snapshot_create.add_argument(
"--label",
"-l",
dest="label",
default=None,
help="label snapshots with a category (e.g. best)")
snapshot_create.add_argument("--session-id",
dest="session_id",
default=None,
help="user given session id")
snapshot_create.add_argument(
"--task-id",
dest="task_id",
default=None,
help="specify task id to pull information from")
snapshot_create.add_argument("--code-id",
dest="code_id",
default=None,
help="code id from code object")
snapshot_create.add_argument("--commit-id",
dest="commit_id",
default=None,
help="commit id from source control")
snapshot_create.add_argument("--environment-id",
dest="environment_id",
default=None,
help="environment id from environment object")
snapshot_create.add_argument(
"--environment-def",
dest="environment_definition_filepath",
default=None,
type=str,
help=
"absolute filepath to environment definition file (e.g. /path/to/Dockerfile)"
)
snapshot_create.add_argument(
"--file-collection-id",
dest="file_collection_id",
default=None,
help="file collection id for file collection object")
snapshot_create.add_argument(
"--filepaths",
dest="filepaths",
default=None,
action="append",
help=
"absolute paths to files or folders to include within the files of the snapshot"
)
snapshot_create.add_argument(
"--config-filename",
dest="config_filename",
default=None,
help="filename to use to search for configuration JSON")
snapshot_create.add_argument(
"--config-filepath",
dest="config_filepath",
default=None,
help="absolute filepath to use to search for configuration JSON")
snapshot_create.add_argument(
"--stats-filename",
dest="stats_filename",
default=None,
help="filename to use to search for metrics JSON")
snapshot_create.add_argument(
"--stats-filepath",
dest="stats_filepath",
default=None,
help="absolute filepath to use to search for metrics JSON")
snapshot_delete = snapshot_subcommand_parsers.add_parser(
"delete", help="delete a snapshot by id")
snapshot_delete.add_argument("--id",
dest="id",
help="snapshot id to delete")
snapshot_ls = snapshot_subcommand_parsers.add_parser("ls",
help="list snapshots")
snapshot_ls.add_argument("--session-id",
dest="session_id",
default=None,
help="session id to filter")
snapshot_ls.add_argument("--all",
"-a",
dest="details",
action="store_true",
help="show detailed snapshot information")
snapshot_checkout = snapshot_subcommand_parsers.add_parser(
"checkout", help="checkout a snapshot by id")
snapshot_checkout.add_argument("--id",
dest="id",
default=None,
help="snapshot id")
# Task
task_parser = subparsers.add_parser("task", help="task module")
task_subcommand_parsers = task_parser.add_subparsers(title="subcommands",
dest="subcommand")
# Task run arguments
task_run = task_subcommand_parsers.add_parser("run", help="run task")
task_run.add_argument("--gpu",
dest="gpu",
action="store_true",
help="boolean if you want to run using GPUs")
task_run.add_argument("--ports",
"-p",
dest="ports",
default=None,
action="append",
type=str,
help="""
network port mapping during task (e.g. 8888:8888). Left is the host machine port and right
is the environment port available during a run.
""")
# run.add_argument("--data", nargs="*", dest="data", type=str, help="Path for data to be used during the Task")
task_run.add_argument(
"--environment-def",
dest="environment_definition_filepath",
default=None,
type=str,
help=
"absolute filepath to environment definition file (e.g. /path/to/Dockerfile)"
)
task_run.add_argument(
"--interactive",
dest="interactive",
action="store_true",
help="run the environment in interactive mode (keeps STDIN open)")
task_run.add_argument("cmd", nargs="?", default=None)
# Task list arguments
task_ls = task_subcommand_parsers.add_parser("ls", help="list tasks")
task_ls.add_argument(
"--session-id",
dest="session_id",
default=None,
nargs="?",
type=str,
help="pass in the session id to list the tasks in that session")
# Task stop arguments
task_stop = task_subcommand_parsers.add_parser("stop", help="stop tasks")
task_stop.add_argument("--id",
dest="id",
default=None,
type=str,
help="task id to stop")
task_stop.add_argument("--all",
"-a",
dest="all",
action="store_true",
help="stop all datmo tasks")
return parser
class BaseCommand(object):
def __init__(self, home, cli_helper):
self.home = home
self.cli_helper = cli_helper
self.parser = Parser(prog="datmo",
usage="""
datmo COMMAND [SUBCOMMANDS] ARGS
Datmo is a command line utility to enable tracking of data science projects.
It uses many of the tools you are already familiar with and combines them into a snapshot
which allows you to keep track of 5 components at once
1) Source Code
2) Dependency Environment
3) Large Files
4) Configurations
5) Metrics
command:
""")
self.subparsers = self.parser.add_subparsers(title="commands",
dest="command")
def parse(self, args):
self.args = self.parser.parse_args(args)
def execute(self):
"""
Calls the method if it exists on this object, otherwise
call a default method name (module name)
Raises
------
ClassMethodNotFound
If the Class method is not found
"""
command_args = vars(self.args).copy()
# use command name if it exists,
# otherwise use the module name
if "subcommand" in command_args:
method = getattr(
self, getattr(self.args, "subcommand", self.args.command))
else:
method = getattr(self,
getattr(self.args, "command", self.args.command))
# remove extraneous options that the method should need to care about
if "command" in command_args:
del command_args["command"]
if "subcommand" in command_args:
del command_args["subcommand"]
if method is None:
raise ClassMethodNotFound(
__("error", "cli.general.method.not_found",
(self.args.command, method)))
method_result = method(**command_args)
return method_result