def __init__(self, i2c, w=128, h=128, addr=_ADDR_SSD1327,
auto_refresh=True, rotation_deg=90):
# Initialize
self.i2c_device = i2c
self._i2c_addr = addr
self._height = h
self._width = w
self._border = 8
self._fontscale = 1
self._tCol = _MAX_COLORS -1
self._bCol = 0
self._tyPos = 0
self._font = terminalio.FONT
dxy = self._font.get_bounding_box()
self._tdx = dxy[0]
self._tdy = dxy[1]
self._power = True
# Generate actual display object
displayio.release_displays()
self._displayBus = displayio.I2CDisplay(i2c.bus, device_address=addr)
self._display = SSD1327(self._displayBus, width=w, height=h,
auto_refresh=auto_refresh, rotation=rotation_deg)
# Generate graphic tools
self._bmp = displayio.Bitmap(w, h, _MAX_COLORS)
self._pal = displayio.Palette(_MAX_COLORS)
self._pal[0] = 0x000000
self._pal[1] = 0x555555
self._pal[2] = 0xAAAAAA
self._pal[3] = 0xFFFFFF
self._tgrid = displayio.TileGrid(self._bmp, pixel_shader=self._pal)
self._group = displayio.Group(max_size=_MAX_GROUPS)
self._group.append(self._tgrid)
self.show()
self.isReady = True
def init(i2c):
global display, is_initialized, splash
displayio.release_displays()
display_bus = displayio.I2CDisplay(i2c, device_address=0x3c)
WIDTH = 128
HEIGHT = 32
display = adafruit_displayio_ssd1306.SSD1306(display_bus, width=WIDTH, height=HEIGHT)
splash = displayio.Group(max_size=10)
display.show(splash)
color_bitmap = displayio.Bitmap(WIDTH, HEIGHT, 1)
color_palette = displayio.Palette(1)
color_palette[0] = 0x000000 # White
bg_sprite = displayio.TileGrid(color_bitmap, pixel_shader=color_palette, x=0, y=0)
splash.append(bg_sprite)
text = " "
text_area = label.Label(terminalio.FONT, text=text, color=0xFFFFFF, x=0, y=3)
splash.append(text_area)
text_area = label.Label(terminalio.FONT, text=text, color=0xFFFFFF, x=0, y=13)
splash.append(text_area)
text_area = label.Label(terminalio.FONT, text=text, color=0xFFFFFF, x=0, y=23)
splash.append(text_area)
is_initialized = True
def __init__(self,
SDA,
SCL,
toDisplay="ACTIVE LAYER",
oWidth=128,
oHeight=32,
tileWidth=128,
tileHeight=32,
gridWidth=1,
gridHeight=1):
releaseDisp()
self._toDisplay = toDisplay
self._display = SSD1306(displayio.I2CDisplay(I2C(SDA, SCL),
device_address=0x3C),
width=oWidth,
height=oHeight)
self._tileHeight = tileHeight
self._tileWidth = tileWidth
self._gridWidth = gridWidth
self._gridHeight = gridHeight
self._prevLayers = 0
def _init_stuff(self):
# decouple display
self.state_display_timeout = 1.0
self.state_display_start = 0
displayio.release_displays()
i2c = board.I2C()
display_bus = displayio.I2CDisplay(i2c, device_address=0x3D)
self.display = adafruit_displayio_ssd1306.SSD1306(
display_bus, width=DISPLAY_WIDTH, height=DISPLAY_HEIGHT)
self.min_press_str = "min: %d" % self.min_pressure
self.high_press_str = "hi: %d" % self.high_pressure
self.pressure_sensor = adafruit_lps35hw.LPS35HW(i2c)
self.pressure_sensor.zero_pressure()
self.pressure_sensor.data_rate = adafruit_lps35hw.DataRate.RATE_75_HZ
self.pressure_sensor.filter_enabled = True
self.pressure_sensor.filter_config = True
def SetupDisplay():
# So we can communicate with our OLED via I2C
i2c = busio.I2C(scl=board.GP3, sda=board.GP2)
#while not i2c.try_lock():
# pass
#print("i2c address is = ",i2c.scan())
# How displayio talks to physical screen
display_bus = displayio.I2CDisplay(
i2c, device_address=60) # was 0x3A, reset=oled_reset)
# display represents the physical screen
display = adafruit_displayio_ssd1306.SSD1306(display_bus,
width=WIDTH,
height=HEIGHT,
auto_refresh=False)
# Group is a list of TileGrids that display would render on physical screen
group = displayio.Group(max_size=1)
display.show(group)
return (display, group)
# pylint: disable=redefined-outer-name
def lookup(layer, key_number):
while layer >= 0:
key = keymaps[layer][key_number]
if key is not None:
return key
layer -= 1
return None
displayio.release_displays()
# oled_reset = board.D9
# Use for I2C
i2c = board.I2C()
display_bus = displayio.I2CDisplay(i2c, device_address=0x3C)
# SH1107 is vertically oriented 64x128
WIDTH = 128
HEIGHT = 64
display = adafruit_displayio_sh1107.SH1107(display_bus,
width=WIDTH,
height=HEIGHT,
rotation=180)
display.auto_refresh = False
font = bitmap_font.load_font("/digit-16px.pcf")
text_area = label.Label(font, text=" ", line_spacing=0.95)
text_area.y = 8
display.show(text_area)
from adafruit_midi.note_on import NoteOn
from adafruit_midi.pitch_bend import PitchBend
displayio.release_displays()
oled_reset = board.D1
# I2C setup for display
# STEMMA I2C setup pre-CP 7.2
i2c = busio.I2C(board.SCL1, board.SDA1)
# STEMMA I2C setup for CP 7.2+
# i2c = board.STEMMA_I2C()
display_bus = displayio.I2CDisplay(i2c, device_address=0x3D, reset=oled_reset)
# midi setup
print(usb_midi.ports)
midi = adafruit_midi.MIDI(
midi_in=usb_midi.ports[0], in_channel=0, midi_out=usb_midi.ports[1], out_channel=0
)
msg = midi.receive()
# display width and height setup
WIDTH = 128
HEIGHT = 64
BORDER = 5
# display setup
password=secrets["aio_key"],
)
# Initialize an Adafruit IO MQTT Client
io = IO_MQTT(mqtt_client)
# Connect the callback methods defined above to Adafruit IO
io.on_connect = connected
io.on_subscribe = subscribe
io.on_message = message
# Connect to Adafruit IO
print("Connecting to Adafruit IO...")
io.connect()
display_bus = displayio.I2CDisplay(board.I2C(), device_address=0x3C)
WIDTH = 128
HEIGHT = 32
BORDER = 2
display = adafruit_displayio_ssd1306.SSD1306(display_bus,
width=WIDTH,
height=HEIGHT)
splash = displayio.Group(max_size=10)
display.show(splash)
digital_label = label.Label(terminalio.FONT,
text="Battery Percent: ",
color=0xFFFFFF,
def __init__(self, bitmap): #imported bitmap
displayio.release_displays()
oled_reset = board.D9
#defines display; change device address/width/height if needed
i2c = board.I2C()
display_bus = displayio.I2CDisplay(i2c,
device_address=0x3D,
reset=oled_reset)
self.display = adafruit_displayio_ssd1306.SSD1306(display_bus,
width=128,
height=64)
#imports sprite sheet, this should contain all sprites, you'll parse them later
self.sprite_sheet, palette = adafruit_imageload.load(
bitmap, bitmap=displayio.Bitmap, palette=displayio.Palette)
#making individual tilemaps from main sprite sheet
self.words = displayio.TileGrid(
self.sprite_sheet,
pixel_shader=palette,
width=35,
height=1,
tile_width=1,
tile_height=5
) #width and height are of the tilegrid: tile_width and tile_height are the number of pixels of the bitmap
self.background = displayio.TileGrid(self.sprite_sheet,
pixel_shader=palette,
width=8,
height=4,
tile_width=16,
tile_height=16)
self.sprite = displayio.TileGrid(self.sprite_sheet,
pixel_shader=palette,
width=1,
height=1,
tile_width=3,
tile_height=3)
self.highscore = displayio.TileGrid(self.sprite_sheet,
pixel_shader=palette,
width=60,
height=1,
tile_width=1,
tile_height=5)
#sub groups
self.words_group = displayio.Group(
scale=3
) #creates subgroups; the scale value, suprisingly, changes the scale of the tilegrid
self.words_group.x = 11 #position of subgroup in relation to main group
self.words_group.y = 24
self.background_group = displayio.Group(scale=1)
self.background_group.x = 0
self.background_group.y = 0
self.sprite_group = displayio.Group(scale=1)
self.highscore_group = displayio.Group(scale=2)
self.highscore_group.x = 4
self.highscore_group.y = 27
#main group
self.group = displayio.Group() #creates main group
@property
def tile_grid(self):
return self._tile_grid
### CircuitPython will use an initalised display for a persistent console
### so release this if this has happened and re-initialise
displayio.release_displays()
### If screen is dead or not present
### ValueError: Unable to find I2C Display at 3c
### RuntimeError: No pull up found on SDA or SCL; check your wiring
try:
i2c = busio.I2C(SSD1306_SCL_PIN, SSD1306_SDA_PIN, frequency=400 * 1000)
display_bus = displayio.I2CDisplay(i2c, device_address=SSD1306_ADDR)
display = adafruit_displayio_ssd1306.SSD1306(display_bus,
width=SSD1306_WIDTH,
height=SSD1306_HEIGHT)
except (ValueError, RuntimeError, OSError):
display = None
if display:
main_group = displayio.Group(max_size=7)
display.show(main_group)
pixel = neopixel.NeoPixel(MPP_NEOPIXEL_PIN, 1)
d_print(1, "T-10")
time.sleep(10)