def Initialize(self):
"""When the workbench is first loaded."""
def QT_TRANSLATE_NOOP(context, text):
return text
# Run self-tests
dependencies_OK = False
try:
from pivy import coin
if FreeCADGui.getSoDBVersion() != coin.SoDB.getVersion():
raise AssertionError("FreeCAD and Pivy use different versions "
"of Coin. "
"This will lead to unexpected behaviour.")
except AssertionError:
FreeCAD.Console.PrintWarning("Error: FreeCAD and Pivy "
"use different versions of Coin. "
"This will lead to unexpected "
"behaviour.\n")
except ImportError:
FreeCAD.Console.PrintWarning("Error: Pivy not found, "
"Draft Workbench will be disabled.\n")
except Exception:
FreeCAD.Console.PrintWarning("Error: Unknown error "
"while trying to load Pivy.\n")
else:
dependencies_OK = True
if not dependencies_OK:
return
# Import Draft tools, icons
try:
import Draft_rc
import DraftTools
import DraftGui
import DraftFillet
FreeCADGui.addLanguagePath(":/translations")
FreeCADGui.addIconPath(":/icons")
except Exception as exc:
FreeCAD.Console.PrintError(exc)
FreeCAD.Console.PrintError("Error: Initializing one or more "
"of the Draft modules failed, "
"Draft will not work as expected.\n")
# Set up command lists
import draftutils.init_tools as it
self.drawing_commands = it.get_draft_drawing_commands()
self.annotation_commands = it.get_draft_annotation_commands()
self.modification_commands = it.get_draft_modification_commands()
self.utility_commands_menu = it.get_draft_utility_commands_menu()
self.utility_commands_toolbar = it.get_draft_utility_commands_toolbar()
self.context_commands = it.get_draft_context_commands()
# Set up toolbars
it.init_toolbar(self,
QT_TRANSLATE_NOOP("Workbench", "Draft creation tools"),
self.drawing_commands)
it.init_toolbar(self,
QT_TRANSLATE_NOOP("Workbench", "Draft annotation tools"),
self.annotation_commands)
it.init_toolbar(self,
QT_TRANSLATE_NOOP("Workbench", "Draft modification tools"),
self.modification_commands)
it.init_toolbar(self,
QT_TRANSLATE_NOOP("Workbench", "Draft utility tools"),
self.utility_commands_toolbar)
# Set up menus
it.init_menu(self,
[QT_TRANSLATE_NOOP("Workbench", "&Drafting")],
self.drawing_commands)
it.init_menu(self,
[QT_TRANSLATE_NOOP("Workbench", "&Annotation")],
self.annotation_commands)
it.init_menu(self,
[QT_TRANSLATE_NOOP("Workbench", "&Modification")],
self.modification_commands)
it.init_menu(self,
[QT_TRANSLATE_NOOP("Workbench", "&Utilities")],
self.utility_commands_menu)
# Set up preferences pages
if hasattr(FreeCADGui, "draftToolBar"):
if not hasattr(FreeCADGui.draftToolBar, "loadedPreferences"):
FreeCADGui.addPreferencePage(":/ui/preferences-draft.ui", QT_TRANSLATE_NOOP("Draft", "Draft"))
FreeCADGui.addPreferencePage(":/ui/preferences-draftinterface.ui", QT_TRANSLATE_NOOP("Draft", "Draft"))
FreeCADGui.addPreferencePage(":/ui/preferences-draftsnap.ui", QT_TRANSLATE_NOOP("Draft", "Draft"))
FreeCADGui.addPreferencePage(":/ui/preferences-draftvisual.ui", QT_TRANSLATE_NOOP("Draft", "Draft"))
FreeCADGui.addPreferencePage(":/ui/preferences-drafttexts.ui", QT_TRANSLATE_NOOP("Draft", "Draft"))
FreeCADGui.draftToolBar.loadedPreferences = True
FreeCADGui.getMainWindow().mainWindowClosed.connect(self.Deactivated)
FreeCAD.Console.PrintLog('Loading Draft workbench, done.\n')
def Initialize(self):
"""When the workbench is first loaded."""
def QT_TRANSLATE_NOOP(context, text):
return text
import Draft_rc
import DraftTools
import DraftGui
import Arch_rc
import Arch
from ArchStructure import _ArchStructureGroupCommand
from ArchAxis import _ArchAxisGroupCommand
from ArchPanel import CommandPanelGroup
from ArchMaterial import _ArchMaterialToolsCommand
from ArchPipe import _ArchPipeGroupCommand
stru_group = _ArchStructureGroupCommand
axis_group = _ArchAxisGroupCommand
pan_group = CommandPanelGroup
mat_group = _ArchMaterialToolsCommand
pipe_group = _ArchPipeGroupCommand
# Set up command lists
self.archtools = [
"Arch_Wall",
([QT_TRANSLATE_NOOP("Workbench", "Structure tools")],
list(stru_group.GetCommands(stru_group))), # tuple len=2: submenu
("Arch_StructureTools", ), # tuple len=1: toolbar flyout
"Arch_Rebar_Submenu", # will be replaced or removed
"Arch_Rebar", # may be replaced
"Arch_CurtainWall",
"Arch_BuildingPart",
"Arch_Project",
"Arch_Site",
"Arch_Building",
"Arch_Floor",
"Arch_Reference",
"Arch_Window",
"Arch_Roof",
([QT_TRANSLATE_NOOP("Workbench", "Axis tools")],
list(axis_group.GetCommands(axis_group))),
("Arch_AxisTools", ),
"Arch_SectionPlane",
"Arch_Space",
"Arch_Stairs",
([QT_TRANSLATE_NOOP("Workbench", "Panel tools")],
list(pan_group.GetCommands(pan_group))),
("Arch_PanelTools", ),
"Arch_Equipment",
"Arch_Frame",
"Arch_Fence",
"Arch_Truss",
"Arch_Profile",
([QT_TRANSLATE_NOOP("Workbench", "Material tools")],
list(mat_group.GetCommands(mat_group))),
("Arch_MaterialTools", ),
"Arch_Schedule",
([QT_TRANSLATE_NOOP("Workbench", "Pipe tools")],
list(pipe_group.GetCommands(pipe_group))),
("Arch_PipeTools", ),
"Arch_CutPlane",
"Arch_CutLine",
"Arch_Add",
"Arch_Remove",
"Arch_Survey"
]
self.utilities = [
"Arch_Component", "Arch_CloneComponent", "Arch_SplitMesh",
"Arch_MeshToShape", "Arch_SelectNonSolidMeshes",
"Arch_RemoveShape", "Arch_CloseHoles", "Arch_MergeWalls",
"Arch_Check", "Arch_ToggleIfcBrepFlag", "Arch_3Views",
"Arch_IfcSpreadsheet", "Arch_ToggleSubs"
]
# Add the rebar tools from the Reinforcement addon, if available
try:
import RebarTools
except Exception:
del self.archtools[3] # remove "Arch_Rebar_Submenu"
else:
class RebarGroupCommand:
def GetCommands(self):
return tuple(RebarTools.RebarCommands + ["Arch_Rebar"])
def GetResources(self):
return {
'MenuText':
QT_TRANSLATE_NOOP("Arch_RebarTools", "Rebar tools"),
'ToolTip':
QT_TRANSLATE_NOOP(
"Arch_RebarTools",
"Create various types of rebars, "
"including U-shaped, L-shaped, and stirrup")
}
def IsActive(self):
return not FreeCAD.ActiveDocument is None
FreeCADGui.addCommand('Arch_RebarTools', RebarGroupCommand())
self.archtools[3] = ([
QT_TRANSLATE_NOOP("Workbench", "Rebar tools")
], RebarTools.RebarCommands + ["Arch_Rebar"])
self.archtools[4] = ("Arch_RebarTools", )
# Set up Draft command lists
import draftutils.init_tools as it
self.draft_drawing_commands = it.get_draft_drawing_commands()
self.draft_annotation_commands = it.get_draft_annotation_commands()
self.draft_modification_commands = it.get_draft_modification_commands()
self.draft_utility_commands = it.get_draft_utility_commands_menu()
self.draft_context_commands = it.get_draft_context_commands()
# Set up toolbars
it.init_toolbar(self, QT_TRANSLATE_NOOP("Workbench", "Arch tools"),
self.archtools)
it.init_toolbar(self,
QT_TRANSLATE_NOOP("Workbench", "Draft creation tools"),
self.draft_drawing_commands)
it.init_toolbar(
self, QT_TRANSLATE_NOOP("Workbench", "Draft annotation tools"),
self.draft_annotation_commands)
it.init_toolbar(
self, QT_TRANSLATE_NOOP("Workbench", "Draft modification tools"),
self.draft_modification_commands)
# Set up menus
it.init_menu(self, [
QT_TRANSLATE_NOOP("Workbench", "&Arch"),
QT_TRANSLATE_NOOP("Workbench", "Utilities")
], self.utilities)
it.init_menu(self, [QT_TRANSLATE_NOOP("Workbench", "&Arch")],
self.archtools)
it.init_menu(self, [
QT_TRANSLATE_NOOP("Workbench", "&Draft"),
QT_TRANSLATE_NOOP("Workbench", "Creation")
], self.draft_drawing_commands)
it.init_menu(self, [
QT_TRANSLATE_NOOP("Workbench", "&Draft"),
QT_TRANSLATE_NOOP("Workbench", "Annotation")
], self.draft_annotation_commands)
it.init_menu(self, [
QT_TRANSLATE_NOOP("Workbench", "&Draft"),
QT_TRANSLATE_NOOP("Workbench", "Modification")
], self.draft_modification_commands)
it.init_menu(self, [
QT_TRANSLATE_NOOP("Workbench", "&Draft"),
QT_TRANSLATE_NOOP("Workbench", "Utilities")
], self.draft_utility_commands)
FreeCADGui.addIconPath(":/icons")
FreeCADGui.addLanguagePath(":/translations")
# Set up preferences pages
if hasattr(FreeCADGui, "draftToolBar"):
if not hasattr(FreeCADGui.draftToolBar, "loadedArchPreferences"):
FreeCADGui.addPreferencePage(":/ui/preferences-arch.ui",
QT_TRANSLATE_NOOP("Arch", "Arch"))
FreeCADGui.addPreferencePage(
":/ui/preferences-archdefaults.ui",
QT_TRANSLATE_NOOP("Arch", "Arch"))
FreeCADGui.draftToolBar.loadedArchPreferences = True
if not hasattr(FreeCADGui.draftToolBar, "loadedPreferences"):
FreeCADGui.addPreferencePage(
":/ui/preferences-draft.ui",
QT_TRANSLATE_NOOP("Draft", "Draft"))
FreeCADGui.addPreferencePage(
":/ui/preferences-draftsnap.ui",
QT_TRANSLATE_NOOP("Draft", "Draft"))
FreeCADGui.addPreferencePage(
":/ui/preferences-draftvisual.ui",
QT_TRANSLATE_NOOP("Draft", "Draft"))
FreeCADGui.addPreferencePage(
":/ui/preferences-drafttexts.ui",
QT_TRANSLATE_NOOP("Draft", "Draft"))
FreeCADGui.draftToolBar.loadedPreferences = True
FreeCAD.Console.PrintLog('Loading Arch workbench, done.\n')
def Initialize(self):
"This function is executed when FreeCAD starts"
import BOPTools # as bop
import Design456_Part as designPart
import Design456_2Ddrawing as TwoDDraw
import Design456_Part_Tools as _tools
import Design456_Alignment as _alignment
import Design456_SelectionGate as SelGate
import DirectModeling.directModelingCommands as dModeling
import DefeaturingWB.DefeaturingTools
import DefeaturingWB.DefeaturingCMD
import DefeaturingWB.FuzzyTools
import Design456Init
from Design456Pref import Design456Preferences
import Design456_Segmented as _segmented
# from Part import CommandShapes #Tube not working
Gui.runCommand('Std_PerspectiveCamera', 1)
self.appendToolbar("Design456_Part", designPart.Design456_Part.list)
self.appendToolbar("Design456 2Ddrawing",
TwoDDraw.Design456_2Ddrawing.list)
self.appendToolbar("Design456_Segmented",
_segmented.Design456_Segmented.list)
self.appendToolbar("Design456 Tools", _tools.Design456_Part_Tools.list)
self.appendToolbar("Design456 Alignment",
_alignment.Design456_Alignment_Tools.list)
self.appendToolbar("Selection Mode",
SelGate.Design456_SelectionGate.list)
self.appendToolbar("Direct Modeling",
dModeling.Design456_DirectModeling.list)
self.appendMenu("Design456_Part", designPart.Design456_Part.list)
self.appendMenu("Design456_2Ddrawing",
TwoDDraw.Design456_2Ddrawing.list)
self.appendMenu("Design456 Tools", _tools.Design456_Part_Tools.list)
self.appendMenu("Design456 Alignment",
_alignment.Design456_Alignment_Tools.list)
# Defeaturing WB added to Design456
self.appendToolbar("Defeaturing Tools", [
"DefeaturingTools", "DF_SelectLoop", "refineFeatureTool",
"DefeatShapeFeature"
])
#self.appendMenu("ksu Tools", ["ksuTools","ksuToolsEdit"])
self.appendMenu(
"Defeaturing Tools",
["refineFeatureTool", "DefeaturingTools", "DF_SelectLoop"])
self.appendToolbar("Fuzzy Tools",
["FuzzyCut", "FuzzyUnion", "FuzzyCommon"])
self.appendMenu("Fuzzy Tools",
["FuzzyCut", "FuzzyUnion", "FuzzyCommon"])
Gui.addIconPath(Design456Init.ICON_PATH)
# Design456_Part
# self.appendMenu(QT_TRANSLATE_NOOP("Draft", "&Drafting"), self.drawing_commands)
# Design456_Part
# DRAFT
def QT_TRANSLATE_NOOP(context, text):
return text
# Run self-tests
dependencies_OK = False
try:
from pivy import coin
import FreeCAD
import FreeCADGui
if FreeCADGui.getSoDBVersion() != coin.SoDB.getVersion():
raise AssertionError("FreeCAD and Pivy use different versions "
"of Coin. "
"This will lead to unexpected behaviour.")
except AssertionError:
FreeCAD.Console.PrintWarning("Error: FreeCAD and Pivy "
"use different versions of Coin. "
"This will lead to unexpected "
"behaviour.\n")
except ImportError:
FreeCAD.Console.PrintWarning("Error: Pivy not found, "
"Draft Workbench will be disabled.\n")
except Exception:
FreeCAD.Console.PrintWarning("Error: Unknown error "
"while trying to load Pivy.\n")
else:
dependencies_OK = True
if not dependencies_OK:
return
# Import Draft tools, icons
try:
import Draft_rc
import DraftTools
import DraftGui
import DraftFillet
import FreeCAD
import FreeCADGui
FreeCADGui.addLanguagePath(":/translations")
FreeCADGui.addIconPath(":/icons")
except Exception as exc:
FreeCAD.Console.PrintError(exc)
FreeCAD.Console.PrintError("Error: Initializing one or more "
"of the Draft modules failed, "
"Draft will not work as expected.\n")
try:
# Set up command lists
import draftutils.init_tools as it
self.drawing_commands = it.get_draft_drawing_commands()
self.annotation_commands = it.get_draft_annotation_commands()
self.modification_commands = it.get_draft_modification_commands()
self.utility_commands_menu = it.get_draft_utility_commands_menu()
self.utility_commands_toolbar = it.get_draft_utility_commands_toolbar(
)
self.context_commands = it.get_draft_context_commands()
# Set up toolbars
it.init_toolbar(self,
QT_TRANSLATE_NOOP("Draft", "Draft creation tools"),
self.drawing_commands)
it.init_toolbar(
self, QT_TRANSLATE_NOOP("Draft", "Draft annotation tools"),
self.annotation_commands)
it.init_toolbar(
self, QT_TRANSLATE_NOOP("Draft", "Draft modification tools"),
self.modification_commands)
it.init_toolbar(self,
QT_TRANSLATE_NOOP("Draft", "Draft utility tools"),
self.utility_commands_toolbar)
# Set up menus
it.init_menu(self, [QT_TRANSLATE_NOOP("Draft", "&Drafting")],
self.drawing_commands)
it.init_menu(self, [QT_TRANSLATE_NOOP("Draft", "&Annotation")],
self.annotation_commands)
it.init_menu(self, [QT_TRANSLATE_NOOP("Draft", "&Modification")],
self.modification_commands)
it.init_menu(self, [QT_TRANSLATE_NOOP("Draft", "&Utilities")],
self.utility_commands_menu)
# Set up preferences pages
if hasattr(FreeCADGui, "draftToolBar"):
if not hasattr(FreeCADGui.draftToolBar, "loadedPreferences"):
FreeCADGui.addPreferencePage(
":/ui/preferences-draft.ui",
QT_TRANSLATE_NOOP("Draft", "Draft"))
FreeCADGui.addPreferencePage(
":/ui/preferences-draftinterface.ui",
QT_TRANSLATE_NOOP("Draft", "Draft"))
FreeCADGui.addPreferencePage(
":/ui/preferences-draftsnap.ui",
QT_TRANSLATE_NOOP("Draft", "Draft"))
FreeCADGui.addPreferencePage(
":/ui/preferences-draftvisual.ui",
QT_TRANSLATE_NOOP("Draft", "Draft"))
FreeCADGui.addPreferencePage(
":/ui/preferences-drafttexts.ui",
QT_TRANSLATE_NOOP("Draft", "Draft"))
FreeCADGui.draftToolBar.loadedPreferences = True
FreeCAD.Console.PrintLog('Loading Draft workbench, done.\n')
# END DRAFT
except Exception as exc:
App.Console.PrintError(exc)
App.Console.PrintError("Error: Initializing one or more "
"of the Draft modules failed, "
"Design456 will not work as expected.\n")