def _realizations(args):
ensemble_size = ERT.enkf_facade.get_ensemble_size()
mask = BoolVector(default_value=False, initial_size=ensemble_size)
if args.realizations is None:
default = "0-{}".format(ensemble_size - 1)
mask.updateActiveMask(default)
return mask
validator = RangeStringArgument(ensemble_size)
validated = validator.validate(args.realizations)
if validated.failed():
raise ArgumentTypeError(
"Defined realizations is not within range of ensemble size: {}".
format(args.realizations))
mask.updateActiveMask(args.realizations)
return mask
def __init__(self):
SimulationConfigPanel.__init__(self, EnsembleSmoother( getQueueConfig( ) ))
layout = QFormLayout()
case_selector = CaseSelector()
layout.addRow("Current case:", case_selector)
run_path_label = QLabel("<b>%s</b>" % getRunPath())
addHelpToWidget(run_path_label, "config/simulation/runpath")
layout.addRow("Runpath:", run_path_label)
number_of_realizations_label = QLabel("<b>%d</b>" % getRealizationCount())
addHelpToWidget(number_of_realizations_label, "config/ensemble/num_realizations")
layout.addRow(QLabel("Number of realizations:"), number_of_realizations_label)
self._target_case_model = TargetCaseModel()
self._target_case_field = StringBox(self._target_case_model, "config/simulation/target_case")
self._target_case_field.setValidator(ProperNameArgument())
layout.addRow("Target case:", self._target_case_field)
self._analysis_module_selector = AnalysisModuleSelector(iterable=False, help_link="config/analysis/analysis_module")
layout.addRow("Analysis Module:", self._analysis_module_selector)
self._active_realizations_model = ActiveRealizationsModel()
self._active_realizations_field = StringBox(self._active_realizations_model, "config/simulation/active_realizations")
self._active_realizations_field.setValidator(RangeStringArgument(getRealizationCount()))
layout.addRow("Active realizations", self._active_realizations_field)
self._target_case_field.getValidationSupport().validationChanged.connect(self.simulationConfigurationChanged)
self._active_realizations_field.getValidationSupport().validationChanged.connect(self.simulationConfigurationChanged)
self.setLayout(layout)
def __init__(self):
SimulationConfigPanel.__init__(self, EnsembleExperiment)
layout = QFormLayout()
case_selector = CaseSelector()
layout.addRow("Current case:", case_selector)
run_path_label = QLabel("<b>%s</b>" % getRunPath())
addHelpToWidget(run_path_label, "config/simulation/runpath")
layout.addRow("Runpath:", run_path_label)
number_of_realizations_label = QLabel("<b>%d</b>" %
getRealizationCount())
addHelpToWidget(number_of_realizations_label,
"config/ensemble/num_realizations")
layout.addRow(QLabel("Number of realizations:"),
number_of_realizations_label)
self._active_realizations_model = ActiveRealizationsModel()
self._active_realizations_field = StringBox(
self._active_realizations_model,
"config/simulation/active_realizations")
self._active_realizations_field.setValidator(
RangeStringArgument(getRealizationCount()))
layout.addRow("Active realizations", self._active_realizations_field)
self._active_realizations_field.getValidationSupport(
).validationChanged.connect(self.simulationConfigurationChanged)
self.setLayout(layout)
def __init__(self):
SimulationConfigPanel.__init__(self, EnsembleExperiment())
layout = QFormLayout()
case_model = CaseSelectorModel()
case_selector = ComboChoice(case_model, "Current case", "init/current_case_selection")
layout.addRow(case_selector.getLabel(), case_selector)
runpath_model = RunPathModel()
runpath_label = ActiveLabel(runpath_model, "Runpath", "config/simulation/runpath")
layout.addRow(runpath_label.getLabel(), runpath_label)
number_of_realizations_model = EnsembleSizeModel()
number_of_realizations_label = ActiveLabel(number_of_realizations_model, "Number of realizations", "config/ensemble/num_realizations")
layout.addRow(number_of_realizations_label.getLabel(), number_of_realizations_label)
active_realizations_model = ActiveRealizationsModel()
self.active_realizations_field = StringBox(active_realizations_model, "Active realizations", "config/simulation/active_realizations")
self.active_realizations_field.setValidator(RangeStringArgument(number_of_realizations_model.getValue()))
layout.addRow(self.active_realizations_field.getLabel(), self.active_realizations_field)
self.active_realizations_field.validationChanged.connect(self.simulationConfigurationChanged)
self.setLayout(layout)
def __init__(self, advanced_option=False):
SimulationConfigPanel.__init__(self, IteratedEnsembleSmoother(),
advanced_option)
layout = QFormLayout()
case_selector = CaseSelector()
layout.addRow("Current case:", case_selector)
run_path_label = QLabel("<b>%s</b>" % getRunPath())
addHelpToWidget(run_path_label, "config/simulation/runpath")
layout.addRow("Runpath:", run_path_label)
number_of_realizations_label = QLabel("<b>%d</b>" %
getRealizationCount())
addHelpToWidget(number_of_realizations_label,
"config/ensemble/num_realizations")
layout.addRow(QLabel("Number of realizations:"),
number_of_realizations_label)
# The num_iterations_spinner does not track any external changes (will that ever happen?)
num_iterations_spinner = QSpinBox()
num_iterations_spinner.setMinimum(1)
num_iterations_spinner.setMaximum(100)
num_iterations_spinner.setValue(getNumberOfIterations())
addHelpToWidget(num_iterations_spinner,
"config/simulation/number_of_iterations")
num_iterations_spinner.valueChanged[int].connect(setNumberOfIterations)
layout.addRow("Number of iterations:", num_iterations_spinner)
self._iterated_target_case_format_model = TargetCaseModel(
format_mode=True)
self._iterated_target_case_format_field = StringBox(
self._iterated_target_case_format_model,
"config/simulation/iterated_target_case_format")
self._iterated_target_case_format_field.setValidator(
ProperNameFormatArgument())
layout.addRow("Target case format:",
self._iterated_target_case_format_field)
self._analysis_module_selector = AnalysisModuleSelector(
iterable=True, help_link="config/analysis/analysis_module")
layout.addRow("Analysis Module:", self._analysis_module_selector)
self._active_realizations_model = ActiveRealizationsModel()
self._active_realizations_field = StringBox(
self._active_realizations_model,
"config/simulation/active_realizations")
self._active_realizations_field.setValidator(
RangeStringArgument(getRealizationCount()))
layout.addRow("Active realizations", self._active_realizations_field)
self._iterated_target_case_format_field.getValidationSupport(
).validationChanged.connect(self.simulationConfigurationChanged)
self._active_realizations_field.getValidationSupport(
).validationChanged.connect(self.simulationConfigurationChanged)
self.setLayout(layout)
def __init__(self):
'''
Fills in the input panel for sensitivity study parameters.
'''
SimulationConfigPanel.__init__(self, SensitivityStudy())
layout = QFormLayout()
case_model = CaseSelectorModel()
case_selector = ComboChoice(case_model, "Current case",
"init/current_case_selection")
layout.addRow(case_selector.getLabel(), case_selector)
runpath_model = RunPathModel()
runpath_label = ActiveLabel(runpath_model, "Runpath",
"config/simulation/runpath")
layout.addRow(runpath_label.getLabel(), runpath_label)
number_of_realizations_model = EnsembleSizeModel()
number_of_realizations_label = ActiveLabel(
number_of_realizations_model, "Number of realizations",
"config/ensemble/num_realizations")
layout.addRow(number_of_realizations_label.getLabel(),
number_of_realizations_label)
sensitivity_target_case_format_model = SensitivityTargetCaseFormatModel(
)
self.iterated_target_case_format_field = StringBox(
sensitivity_target_case_format_model, "Target case format",
"config/simulation/sensitivity_target_case_format")
self.iterated_target_case_format_field.setValidator(
ProperNameFormatStringArgument())
layout.addRow(self.iterated_target_case_format_field.getLabel(),
self.iterated_target_case_format_field)
self.parameters_popup_button = QToolButton()
self.parameters_popup_button.setIcon(
util.resourceIcon("ide/small/cog_edit.png"))
self.parameters_popup_button.clicked.connect(self.showParametersPopup)
self.parameters_popup_button.setMaximumSize(20, 20)
layout.addRow("Parameters:", self.parameters_popup_button)
active_realizations_model = ActiveRealizationsModel()
self.active_realizations_field = StringBox(
active_realizations_model, "Active realizations",
"config/simulation/active_realizations")
self.active_realizations_field.setValidator(
RangeStringArgument(number_of_realizations_model.getValue()))
layout.addRow(self.active_realizations_field.getLabel(),
self.active_realizations_field)
self.active_realizations_field.validationChanged.connect(
self.simulationConfigurationChanged)
self.setLayout(layout)
def __init__(self):
QWidget.__init__(self)
self.setMinimumWidth(500)
self.setMinimumHeight(200)
self.__dynamic = False
self.setWindowTitle("Load results manually")
self.activateWindow()
layout = QFormLayout()
current_case = CaseSelectorModel().getCurrentChoice()
run_path_text = QTextEdit()
run_path_text.setText(self.readCurrentRunPath())
run_path_text.setDisabled(True)
run_path_text.setFixedHeight(80)
layout.addRow("Load data from current run path: ", run_path_text)
self.__case_model = AllCasesModel()
self.__case_combo = QComboBox()
self.__case_combo.setSizeAdjustPolicy(
QComboBox.AdjustToMinimumContentsLength)
self.__case_combo.setMinimumContentsLength(20)
self.__case_combo.setModel(self.__case_model)
self.__case_combo.setCurrentIndex(
self.__case_model.indexOf(current_case))
layout.addRow("Load into case:", self.__case_combo)
self.__active_realizations_model = LoadResultsRealizationsModel(
EnsembleSizeModel().getValue())
self.__active_realizations_field = StringBox(
self.__active_realizations_model, "Realizations to load",
"load_results_manually/Realizations")
self.__active_realizations_field.setValidator(RangeStringArgument())
layout.addRow(self.__active_realizations_field.getLabel(),
self.__active_realizations_field)
self.__iterations_count = LoadResultsModel().getIterationCount()
self._iterations_model = LoadResultsIterationsModel(
self.__iterations_count)
self._iterations_field = StringBox(self._iterations_model,
"Iteration to load",
"load_results_manually/iterations")
self._iterations_field.setValidator(IntegerArgument())
layout.addRow(self._iterations_field.getLabel(),
self._iterations_field)
self.setLayout(layout)
def __init__(self):
SimulationConfigPanel.__init__(self, MultipleDataAssimilation)
layout = QFormLayout()
case_selector = CaseSelector()
layout.addRow("Current case:", case_selector)
run_path_label = QLabel("<b>%s</b>" % getRunPath())
addHelpToWidget(run_path_label, "config/simulation/runpath")
layout.addRow("Runpath:", run_path_label)
number_of_realizations_label = QLabel("<b>%d</b>" %
getRealizationCount())
addHelpToWidget(number_of_realizations_label,
"config/ensemble/num_realizations")
layout.addRow(QLabel("Number of realizations:"),
number_of_realizations_label)
self._target_case_format_model = TargetCaseModel(format_mode=True)
self._target_case_format_field = StringBox(
self._target_case_format_model,
"config/simulation/target_case_format")
self._target_case_format_field.setValidator(ProperNameFormatArgument())
layout.addRow("Target case format:", self._target_case_format_field)
self.weights = MultipleDataAssimilation.default_weights
self._createInputForWeights(layout)
self._analysis_module_selector = AnalysisModuleSelector(
iterable=False, help_link="config/analysis/analysis_module")
layout.addRow("Analysis Module:", self._analysis_module_selector)
self._active_realizations_model = ActiveRealizationsModel()
self._active_realizations_field = StringBox(
self._active_realizations_model,
"config/simulation/active_realizations")
self._active_realizations_field.setValidator(
RangeStringArgument(getRealizationCount()))
layout.addRow("Active realizations", self._active_realizations_field)
self._target_case_format_field.getValidationSupport(
).validationChanged.connect(self.simulationConfigurationChanged)
self._active_realizations_field.getValidationSupport(
).validationChanged.connect(self.simulationConfigurationChanged)
self._relative_iteration_weights_box.getValidationSupport(
).validationChanged.connect(self.simulationConfigurationChanged)
self.setLayout(layout)
def __init__(self):
SimulationConfigPanel.__init__(self, EnsembleExperiment)
self.setObjectName("Ensemble_experiment_panel")
layout = QFormLayout()
self._case_selector = CaseSelector()
layout.addRow("Current case:", self._case_selector)
run_path_label = QLabel("<b>%s</b>" % getRunPath())
addHelpToWidget(run_path_label, "config/simulation/runpath")
layout.addRow("Runpath:", run_path_label)
number_of_realizations_label = QLabel("<b>%d</b>" %
getRealizationCount())
addHelpToWidget(number_of_realizations_label,
"config/ensemble/num_realizations")
layout.addRow(QLabel("Number of realizations:"),
number_of_realizations_label)
self._active_realizations_field = StringBox(
ActiveRealizationsModel(),
"config/simulation/active_realizations",
)
self._active_realizations_field.setValidator(
RangeStringArgument(getRealizationCount()), )
layout.addRow("Active realizations", self._active_realizations_field)
self._iter_field = StringBox(
IterValueModel(),
"config/simulation/iter_num",
)
self._iter_field.setValidator(IntegerArgument(from_value=0), )
layout.addRow("Iteration", self._iter_field)
self.setLayout(layout)
self._active_realizations_field.getValidationSupport(
).validationChanged.connect(self.simulationConfigurationChanged)
self._case_selector.currentIndexChanged.connect(
self._realizations_from_fs)
self._realizations_from_fs() # update with the current case
def valid_realizations(user_input):
validator = RangeStringArgument()
validated = validator.validate(user_input)
if validated.failed():
strip_error_message_and_raise_exception(validated)
return user_input
def __init__(self, parent=None):
QWidget.__init__(self, parent)
self.setMinimumWidth(500)
self.setMinimumHeight(200)
self._dynamic = False
self.setWindowTitle("Export data")
self.activateWindow()
layout = QFormLayout()
current_case = getCurrentCaseName()
self._case_model = AllCasesModel()
self._case_combo = QComboBox()
self._case_combo.setSizeAdjustPolicy(QComboBox.AdjustToMinimumContentsLength)
self._case_combo.setMinimumContentsLength(20)
self._case_combo.setModel(self._case_model)
self._case_combo.setCurrentIndex(self._case_model.indexOf(current_case))
layout.addRow("Select case:", self._case_combo)
self._export_keyword_model = ExportKeywordModel()
self._kw_model = self._export_keyword_model.getKeyWords()
self._keywords = QComboBox()
self._keywords.addItems(self._kw_model)
layout.addRow("Select keyword:", self._keywords)
self._active_realizations_model = ActiveRealizationsModel()
self._active_realizations_field = StringBox(self._active_realizations_model, "config/simulation/active_realizations")
self._active_realizations_field.setValidator(RangeStringArgument())
self._active_realizations_field.getValidationSupport().validationChanged.connect(self.validateExportDialog)
layout.addRow("Active realizations:", self._active_realizations_field)
file_name_button = QToolButton()
file_name_button.setText("Browse")
file_name_button.clicked.connect(self.selectFileDirectory)
self._defaultPath = QDir.currentPath() + "/export"
self._file_name = QLineEdit()
self._file_name.setEnabled(False)
self._file_name.setText(self._defaultPath)
self._file_name.textChanged.connect(self.validateExportDialog)
self._file_name.setMinimumWidth(250)
file_name_layout = QHBoxLayout()
file_name_layout.addWidget(self._file_name)
file_name_layout.addWidget(file_name_button)
layout.addRow("Select directory to save files to:", file_name_layout)
self._gen_kw_file_types = ["Parameter list", "Template based"]
self._field_kw_file_types = ["Eclipse GRDECL", "RMS roff"]
self._gen_data_file_types = ["Gen data"]
self._file_type_model = self._field_kw_file_types
self._file_type_combo = QComboBox()
self._file_type_combo.setSizeAdjustPolicy(QComboBox.AdjustToContents)
self._file_type_combo.addItems(self._file_type_model)
layout.addRow("Select file format:", self._file_type_combo)
self._report_step = QLineEdit()
layout.addRow("Report step:", self._report_step)
self._gen_data_report_step_model = []
self._gen_data_report_step = QComboBox()
layout.addRow("Report step:", self._gen_data_report_step)
self.setLayout(layout)
self._keywords.currentIndexChanged.connect(self.keywordSelected)
self.keywordSelected()
def __init__(self):
SimulationConfigPanel.__init__(self, IteratedEnsembleSmoother())
layout = QFormLayout()
case_model = CaseSelectorModel()
case_selector = ComboChoice(case_model, "Current case",
"init/current_case_selection")
layout.addRow(case_selector.getLabel(), case_selector)
run_path_model = RunPathModel()
run_path_label = ActiveLabel(run_path_model, "Runpath",
"config/simulation/runpath")
layout.addRow(run_path_label.getLabel(), run_path_label)
number_of_realizations_model = EnsembleSizeModel()
number_of_realizations_label = ActiveLabel(
number_of_realizations_model, "Number of realizations",
"config/ensemble/num_realizations")
layout.addRow(number_of_realizations_label.getLabel(),
number_of_realizations_label)
num_iterations_model = NumberOfIterationsModel()
num_iterations_spinner = IntegerSpinner(
num_iterations_model, "Number of iterations",
"config/simulation/number_of_iterations")
layout.addRow(num_iterations_spinner.getLabel(),
num_iterations_spinner)
iterated_target_case_format_model = TargetCaseFormatModel()
self.iterated_target_case_format_field = StringBox(
iterated_target_case_format_model, "Target case format",
"config/simulation/iterated_target_case_format")
self.iterated_target_case_format_field.setValidator(
ProperNameFormatArgument())
layout.addRow(self.iterated_target_case_format_field.getLabel(),
self.iterated_target_case_format_field)
iterated_analysis_module_model = IteratedAnalysisModuleModel()
self.iterated_analysis_module_choice = ComboChoice(
iterated_analysis_module_model, "Analysis Module",
"config/analysis/iterated_analysis_module")
self.variables_popup_button = QToolButton()
self.variables_popup_button.setIcon(
util.resourceIcon("ide/small/cog_edit.png"))
self.variables_popup_button.clicked.connect(self.showVariablesPopup)
self.variables_popup_button.setMaximumSize(20, 20)
self.variables_layout = QHBoxLayout()
self.variables_layout.addWidget(self.iterated_analysis_module_choice,
0, Qt.AlignLeft)
self.variables_layout.addWidget(self.variables_popup_button, 0,
Qt.AlignLeft)
self.variables_layout.setContentsMargins(QMargins(0, 0, 0, 0))
self.variables_layout.addStretch()
layout.addRow(self.iterated_analysis_module_choice.getLabel(),
self.variables_layout)
active_realizations_model = ActiveRealizationsModel()
self.active_realizations_field = StringBox(
active_realizations_model, "Active realizations",
"config/simulation/active_realizations")
self.active_realizations_field.setValidator(RangeStringArgument())
layout.addRow(self.active_realizations_field.getLabel(),
self.active_realizations_field)
self.iterated_target_case_format_field.validationChanged.connect(
self.simulationConfigurationChanged)
self.active_realizations_field.validationChanged.connect(
self.simulationConfigurationChanged)
self.setLayout(layout)