def forwardDeclartions():
"Force some functions to be dynamic"
mockRepository = settings.Repository()
settings.addListsToRepository(None, None, mockRepository)
settings.cancelRepository(mockRepository)
settings.getDisplayedDialogFromConstructor(mockRepository)
settings.getProfileBaseName(mockRepository)
settings.getReadRepository(mockRepository)
settings.readSettingsFromText(mockRepository, '')
settings.saveRepository(mockRepository)
settings.startMainLoopFromConstructor(mockRepository)
settings.writeSettings(mockRepository)
settings.writeSettingsPrintMessage(mockRepository)
settings.StringSetting().getFromValue('', mockRepository, '')
settings.StringSetting().getFromValueOnly('', mockRepository, '')
settings.StringSetting().getFromValueOnlyAddToRepository('', mockRepository, '')
settings.FileNameInput().getFromFileName([('','')], '', mockRepository, '')
settings.GridVertical(0, 0).setExecutablesRepository(mockRepository)
settings.HelpPage().setToNameRepository('', mockRepository)
settings.HelpPage().getFromNameAfterWWW('', '', mockRepository)
settings.HelpPage().getFromNameAfterHTTP('', '', mockRepository)
settings.HelpPage().getFromNameSubName('', mockRepository, '')
settings.HelpPageRepository.__init__(settings.HelpPageRepository(), mockRepository)
settings.LabelDisplay().getFromName('', mockRepository)
settings.LabelSeparator().getFromRepository(mockRepository)
settings.MenuButtonDisplay().getFromName('', mockRepository)
settings.Radio().getFromRadio(None, '', mockRepository, False)
settings.WindowPosition().getFromValue(mockRepository, '')
settings.RepositoryDialog(mockRepository, None).addButtons(mockRepository, None)
settings.RepositoryDialog.__init__(RepositoryDialog(), mockRepository, None)
gcodec.Plugins.add(settings.Plugin())
Tkinter.Button.__init__(None, {})
def __init__(self):
"Set the default settings, execute title & settings fileName."
skeinforge_profile.addListsToCraftTypeRepository('skeinforge_application.skeinforge_plugins.craft_plugins.export.html', self )
self.fileNameInput = settings.FileNameInput().getFromFileName( fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(), 'Open File for Export', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute('http://www.bitsfrombytes.com/wiki/index.php?title=Skeinforge_Export')
self.activateExport = settings.BooleanSetting().getFromValue('Activate Export', self, True )
self.alsoSendOutputTo = settings.StringSetting().getFromValue('Also Send Output To:', self, '')
self.deleteComments = settings.BooleanSetting().getFromValue('Delete Comments', self, True )
exportPluginsFolderPath = archive.getAbsoluteFrozenFolderPath( __file__, 'export_plugins')
exportStaticDirectoryPath = os.path.join( exportPluginsFolderPath, 'static_plugins')
exportPluginFileNames = archive.getPluginFileNamesFromDirectoryPath( exportPluginsFolderPath )
exportStaticPluginFileNames = archive.getPluginFileNamesFromDirectoryPath( exportStaticDirectoryPath )
self.exportLabel = settings.LabelDisplay().getFromName('Export Operations: ', self )
self.exportPlugins = []
exportLatentStringVar = settings.LatentStringVar()
self.doNotChangeOutput = settings.RadioCapitalized().getFromRadio( exportLatentStringVar, 'Do Not Change Output', self, True )
self.doNotChangeOutput.directoryPath = None
allExportPluginFileNames = exportPluginFileNames + exportStaticPluginFileNames
for exportPluginFileName in allExportPluginFileNames:
exportPlugin = None
if exportPluginFileName in exportPluginFileNames:
path = os.path.join( exportPluginsFolderPath, exportPluginFileName )
exportPlugin = settings.RadioCapitalizedButton().getFromPath( exportLatentStringVar, exportPluginFileName, path, self, False )
exportPlugin.directoryPath = exportPluginsFolderPath
else:
exportPlugin = settings.RadioCapitalized().getFromRadio( exportLatentStringVar, exportPluginFileName, self, False )
exportPlugin.directoryPath = exportStaticDirectoryPath
self.exportPlugins.append( exportPlugin )
self.fileExtension = settings.StringSetting().getFromValue('File Extension:', self, 'gcode')
self.savePenultimateGcode = settings.BooleanSetting().getFromValue('Save Penultimate Gcode', self, False )
self.executeTitle = 'Export'
def __init__(self):
"Set the default settings, execute title & settings fileName."
skeinforge_profile.addListsToCraftTypeRepository(
'skeinforge_application.skeinforge_plugins.craft_plugins.preface.html',
self)
self.fileNameInput = settings.FileNameInput().getFromFileName(
fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(),
'Open File for Preface', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute(
'http://www.bitsfrombytes.com/wiki/index.php?title=Skeinforge_Preface'
)
self.meta = settings.StringSetting().getFromValue('Meta:', self, '')
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- Name of Alteration Files -',
self)
self.nameOfEndFile = settings.StringSetting().getFromValue(
'Name of End File:', self, 'end.gcode')
self.nameOfStartFile = settings.StringSetting().getFromValue(
'Name of Start File:', self, 'start.gcode')
settings.LabelSeparator().getFromRepository(self)
self.setPositioningToAbsolute = settings.BooleanSetting().getFromValue(
'Set Positioning to Absolute', self, True)
self.setUnitsToMillimeters = settings.BooleanSetting().getFromValue(
'Set Units to Millimeters', self, True)
self.startAtHome = settings.BooleanSetting().getFromValue(
'Start at Home', self, False)
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- Turn Extruder Off -', self)
self.turnExtruderOffAtShutDown = settings.BooleanSetting(
).getFromValue('Turn Extruder Off at Shut Down', self, True)
self.turnExtruderOffAtStartUp = settings.BooleanSetting().getFromValue(
'Turn Extruder Off at Start Up', self, True)
self.executeTitle = 'Preface'
def __init__(self):
'Set the default settings, execute title & settings fileName.'
skeinforge_profile.addListsToCraftTypeRepository('skeinforge_application.skeinforge_plugins.craft_plugins.cool.html', self )
self.fileNameInput = settings.FileNameInput().getFromFileName(
fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(), 'Open File for Cool', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute(
'http://fabmetheus.crsndoo.com/wiki/index.php/Skeinforge_Cool')
self.activateCool = settings.BooleanSetting().getFromValue('Activate Cool.. but use with a fan!', self, False)
settings.LabelDisplay().getFromName('- When To use Cool?-', self )
self.minimumLayerTime = settings.FloatSpin().getFromValue(0.0, 'Use Cool if layer takes shorter than(seconds):', self, 120.0, 10.0)
self.minimumLayerFeedrate = settings.FloatSpin().getFromValue(5.0, 'Do not go slower than (mm/s):', self, 50.0, 15.0)
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- What to do if Cool is necessary? -', self )
self.turnFanOnAtBeginning = settings.BooleanSetting().getFromValue('Turn Fan On at Beginning', self, True)
self.turnFanOffAtEnding = settings.BooleanSetting().getFromValue('Turn Fan Off at Ending', self, True)
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- Name of Macro (gmc) Files to execute -', self )
self.nameOfCoolEndFile = settings.StringSetting().getFromValue('Execute when Cool ends:', self, 'cool_end.gmc')
self.nameOfCoolStartFile = settings.StringSetting().getFromValue('Execute when Cool starts:', self, 'cool_start.gmc')
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- How to Cool? -', self )
self.coolType = settings.MenuButtonDisplay().getFromName('Cool by:', self)
self.orbit = settings.MenuRadio().getFromMenuButtonDisplay(self.coolType, 'Orbiting around Object', self, False)
self.slowDown = settings.MenuRadio().getFromMenuButtonDisplay(self.coolType, 'Slow Down during print', self, True)
settings.LabelSeparator().getFromRepository(self)
self.maximumCool = settings.FloatSpin().getFromValue(0.0, 'Maximum Cool (Celcius):', self, 10.0, 2.0)
self.bridgeCool = settings.FloatSpin().getFromValue(0.0, 'Bridge Cool (Celcius):', self, 10.0, 1.0)
self.minimumOrbitalRadius = settings.FloatSpin().getFromValue(
0.0, 'Minimum Orbital Radius (millimeters):', self, 20.0, 10.0)
settings.LabelSeparator().getFromRepository(self)
self.orbitalOutset = settings.FloatSpin().getFromValue(1.0, 'Orbital Outset (millimeters):', self, 5.0, 2.0)
self.executeTitle = 'Cool'
def __init__(self):
'Set the default settings, execute title & settings fileName.'
skeinforge_profile.addListsToCraftTypeRepository('skeinforge_application.skeinforge_plugins.craft_plugins.cool.html', self )
self.fileNameInput = settings.FileNameInput().getFromFileName(
fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(), 'Open File for Cool', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute(
'http://fabmetheus.crsndoo.com/wiki/index.php/Skeinforge_Cool')
self.activateCool = settings.BooleanSetting().getFromValue('Activate Cool', self, True)
self.bridgeCool = settings.FloatSpin().getFromValue(0.0, 'Bridge Cool (Celcius):', self, 10.0, 1.0)
self.coolType = settings.MenuButtonDisplay().getFromName('Cool Type:', self)
self.orbit = settings.MenuRadio().getFromMenuButtonDisplay(self.coolType, 'Orbit', self, False)
self.slowDown = settings.MenuRadio().getFromMenuButtonDisplay(self.coolType, 'Slow Down', self, True)
self.maximumCool = settings.FloatSpin().getFromValue(0.0, 'Maximum Cool (Celcius):', self, 10.0, 2.0)
self.minimumLayerTime = settings.FloatSpin().getFromValue(0.0, 'Minimum Layer Time (seconds):', self, 120.0, 60.0)
self.minimumOrbitalRadius = settings.FloatSpin().getFromValue(
0.0, 'Minimum Orbital Radius (millimeters):', self, 20.0, 10.0)
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- Name of Alteration Files -', self )
self.nameOfCoolEndFile = settings.StringSetting().getFromValue('Name of Cool End File:', self, 'cool_end.gcode')
self.nameOfCoolStartFile = settings.StringSetting().getFromValue('Name of Cool Start File:', self, 'cool_start.gcode')
settings.LabelSeparator().getFromRepository(self)
self.orbitalOutset = settings.FloatSpin().getFromValue(1.0, 'Orbital Outset (millimeters):', self, 5.0, 2.0)
self.turnFanOnAtBeginning = settings.BooleanSetting().getFromValue('Turn Fan On at Beginning', self, True)
self.turnFanOffAtEnding = settings.BooleanSetting().getFromValue('Turn Fan Off at Ending', self, True)
self.executeTitle = 'Cool'
def __init__(self):
"Set the default settings, execute title & settings fileName."
skeinforge_profile.addListsToCraftTypeRepository(
'skeinforge_application.skeinforge_plugins.craft_plugins.carve.html',
self)
self.fileNameInput = settings.FileNameInput().getFromFileName(
fabmetheus_interpret.getTranslatorFileTypeTuples(),
'Open File for Carve', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute(
'http://fabmetheus.crsndoo.com/wiki/index.php/Skeinforge_Carve')
self.addLayerTemplateToSVG = settings.BooleanSetting().getFromValue(
'Add Layer Template to SVG', self, True)
self.edgeWidth = settings.FloatSpin().getFromValue(
0.1, 'Edge Width (mm):', self, 2.2, 0.4)
self.extraDecimalPlaces = settings.FloatSpin().getFromValue(
0.0, 'Extra Decimal Places (float):', self, 3.0, 2.0)
self.importCoarseness = settings.FloatSpin().getFromValue(
0.5, 'Import Coarseness (ratio):', self, 2.0, 1.0)
self.layerHeight = settings.FloatSpin().getFromValue(
0.1, 'Layer Height (mm):', self, 1.0, 0.2)
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- Layers -', self)
self.layersFrom = settings.IntSpin().getFromValue(
0, 'Layers From (index):', self, 20, 0)
self.layersTo = settings.IntSpin().getSingleIncrementFromValue(
0, 'Layers To (index):', self, 912345678, 912345678)
settings.LabelSeparator().getFromRepository(self)
self.meshTypeLabel = settings.LabelDisplay().getFromName(
'Mesh Type: ', self)
importLatentStringVar = settings.LatentStringVar()
self.correctMesh = settings.Radio().getFromRadio(
importLatentStringVar, 'Correct Mesh', self, True)
self.unprovenMesh = settings.Radio().getFromRadio(
importLatentStringVar, 'Unproven Mesh', self, False)
self.svgViewer = settings.StringSetting().getFromValue(
'SVG Viewer:', self, 'webbrowser')
settings.LabelSeparator().getFromRepository(self)
self.executeTitle = 'Carve'
self.flipX = settings.BooleanSetting().getFromValue(
'FlipX', self, False)
self.flipY = settings.BooleanSetting().getFromValue(
'FlipY', self, False)
self.flipZ = settings.BooleanSetting().getFromValue(
'FlipZ', self, False)
self.swapXZ = settings.BooleanSetting().getFromValue(
'SwapXZ', self, False)
self.swapYZ = settings.BooleanSetting().getFromValue(
'SwapYZ', self, False)
self.centerX = settings.FloatSpin().getFromValue(
0.0, 'CenterX', self, 1000.0, 0.0)
self.centerY = settings.FloatSpin().getFromValue(
0.0, 'CenterY', self, 1000.0, 0.0)
self.scale = settings.FloatSpin().getFromValue(0.1, 'Scale', self,
10.0, 1.0)
self.rotate = settings.FloatSpin().getFromValue(
-180.0, 'Rotate', self, 180.0, 0.0)
self.alternativeCenter = settings.StringSetting().getFromValue(
'AlternativeCenterFile', self, '')
def __init__(self):
"Set the default settings, execute title & settings fileName."
settings.addListsToRepository(
'skeinforge.skeinforge_tools.analyze_plugins.export_canvas_plugins.svg.html',
'', self)
self.fileExtension = settings.StringSetting().getFromValue(
'File Extension:', self, '')
self.svgProgram = settings.StringSetting().getFromValue(
'Scalable Vector Graphics Program:', self, 'netscape')
def __init__(self):
"Set the default settings, execute title & settings fileName."
settings.addListsToRepository(
'skeinforge_plugins.analyze_plugins.export_canvas_plugins.postscript.html',
'', self)
self.fileExtension = settings.StringSetting().getFromValue(
'File Extension:', self, '')
self.postscriptProgram = settings.StringSetting().getFromValue(
'Postscript Program:', self, 'gimp')
def __init__(self):
"Set the default settings, execute title & settings fileName."
skeinforge_profile.addListsToCraftTypeRepository(
'skeinforge_application.skeinforge_plugins.analyze_plugins.export_canvas_plugins.scalable_vector_graphics.html',
self)
self.fileExtension = settings.StringSetting().getFromValue(
'File Extension:', self, '')
self.svgViewer = settings.StringSetting().getFromValue(
'SVG Viewer:', self, 'webbrowser')
def __init__(self):
"Set the default settings, execute title & settings fileName."
skeinforge_profile.addListsToCraftTypeRepository('skeinforge_application.skeinforge_plugins.craft_plugins.alteration.html', self )
self.baseNameSynonym = 'bookend.csv'
self.fileNameInput = settings.FileNameInput().getFromFileName(fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(), 'Open File for Alteration', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute('http://fabmetheus.crsndoo.com/wiki/index.php/Skeinforge_Alteration')
self.activateAlteration = settings.BooleanSetting().getFromValue('Activate Alteration', self, True)
self.nameOfEndFile = settings.StringSetting().getFromValue('Name of End File:', self, 'end.gcode')
self.nameOfStartFile = settings.StringSetting().getFromValue('Name of Start File:', self, 'start.gcode')
self.removeRedundantMcode = settings.BooleanSetting().getFromValue('Remove Redundant Mcode', self, True)
self.replaceVariableWithSetting = settings.BooleanSetting().getFromValue('Replace Variable with Setting', self, True)
self.executeTitle = 'Alteration'
def __init__(self):
"Set the default settings, execute title & settings fileName."
skeinforge_profile.addListsToCraftTypeRepository('skeinforge_application.skeinforge_plugins.craft_plugins.carve.html', self )
self.fileNameInput = settings.FileNameInput().getFromFileName( fabmetheus_interpret.getTranslatorFileTypeTuples(), 'Open File for Carve', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute('http://fabmetheus.crsndoo.com/wiki/index.php/Skeinforge_Carve')
settings.LabelDisplay().getFromName('- MAIN SETTINGS for Extrusion -', self )
settings.LabelSeparator().getFromRepository(self)
self.layerThickness = settings.FloatSpin().getFromValue( 0.1, 'Layer Height = Extrusion Thickness (mm):', self, 1.0, 0.4 )
self.perimeterWidthOverThickness = settings.FloatSpin().getFromValue( 0.2, 'Extrusion Width (mm):', self, 1.0, 0.6 )
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- Layers to print -', self )
self.layersFrom = settings.IntSpin().getFromValue( 0, 'Print from Layer No::', self, 3333, 0 )
self.layersTo = settings.IntSpin().getSingleIncrementFromValue( 0, 'Print up to Layer No:', self, 912345678, 912345678 )
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- Do not touch those below -', self )
settings.LabelSeparator().getFromRepository(self)
self.meshTypeLabel = settings.LabelDisplay().getFromName('Mesh Type: ', self )
importLatentStringVar = settings.LatentStringVar()
self.correctMesh = settings.Radio().getFromRadio( importLatentStringVar, 'Correct Mesh', self, True )
self.unprovenMesh = settings.Radio().getFromRadio( importLatentStringVar, 'Unproven Mesh', self, False )
self.svgViewer = settings.StringSetting().getFromValue('SVG Viewer:', self, 'webbrowser')
self.addLayerTemplateToSVG = settings.BooleanSetting().getFromValue('Add Layer Template to SVG', self, True)
self.extraDecimalPlaces = settings.FloatSpin().getFromValue(1.0, 'Extra Decimal Places (float):', self, 4.0, 3.0)
self.importCoarseness = settings.FloatSpin().getFromValue( 0.5, 'Import Coarseness (ratio):', self, 2.0, 1.0 )
settings.LabelSeparator().getFromRepository(self)
self.executeTitle = 'Carve'
def __init__(self):
"Set the default settings, execute title & settings fileName."
#Set the default settings.
skeinforge_profile.addListsToCraftTypeRepository(
'skeinforge_application.skeinforge_plugins.craft_plugins.export_plugins.binary_16_byte.html',
self)
self.fileNameInput = settings.FileNameInput().getFromFileName(
[('Gcode text files', '*.gcode')],
'Open File to be Converted to Binary 16 Byte', self, '')
self.feedRateStepLength = settings.FloatSpin().getFromValue(
0.0, 'Feed Rate Step Length (millimeters/second)', self, 1.0, 0.1)
self.fileExtension = settings.StringSetting().getFromValue(
'File Extension:', self, 'bin')
settings.LabelDisplay().getFromName('Offset:', self)
self.xOffset = settings.FloatSpin().getFromValue(
-100.0, 'X Offset (millimeters)', self, 100.0, 0.0)
self.yOffset = settings.FloatSpin().getFromValue(
-100.0, 'Y Offset (millimeters)', self, 100.0, 0.0)
self.zOffset = settings.FloatSpin().getFromValue(
-10.0, 'Z Offset (millimeters)', self, 10.0, 0.0)
settings.LabelDisplay().getFromName('Step Length:', self)
self.xStepLength = settings.FloatSpin().getFromValue(
0.0, 'X Step Length (millimeters)', self, 1.0, 0.1)
self.yStepLength = settings.FloatSpin().getFromValue(
0.0, 'Y Step Length (millimeters)', self, 1.0, 0.1)
self.zStepLength = settings.FloatSpin().getFromValue(
0.0, 'Z Step Length (millimeters)', self, 0.2, 0.01)
self.executeTitle = 'Convert to Binary 16 Byte'
def __init__( self ):
"Set the default settings, execute title & settings fileName."
skeinforge_profile.addListsToCraftTypeRepository( 'skeinforge_tools.craft_plugins.oozestep.html', self )
self.fileNameInput = settings.FileNameInput().getFromFileName( fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(), 'Open File for oozestep', self, '' )
self.activateoozestep = settings.BooleanSetting().getFromValue( 'Activate oozestep', self, False )
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- Feedrates -', self )
#zFeed
self.zFeed = settings.FloatSpin().getFromValue( 4.0, 'Z feed (mm/s):', self, 34.0, 8.3 )
#first layer feed
self.firstLayerFeed = settings.FloatSpin().getFromValue( 4.0, 'First layer feed (mm/s):', self, 34.0, 25 )
#join paths - NOT USED
#self.joinPaths = settings.FloatSpin().getFromValue( 4.0, 'Join paths (mm):', self, 34.0, 2.0 )
#output G1
self.g_one = settings.BooleanSetting().getFromValue( 'Output G1 for linear feed moves', self, False )
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- Extruder control -', self )
#first path press dist
self.firstPathPressDist = settings.FloatSpin().getFromValue( 4.0, 'First path press dist (mm):', self, 34.0, 30.0 )
#first path press feed
self.firstPathPressFeed = settings.FloatSpin().getFromValue( 4.0, 'First path press feed (mm/s):', self, 34.0, 30.0 )
#first path each layer press dist
self.firstLayerPathPressDist = settings.FloatSpin().getFromValue( 4.0, 'First layer path press dist (mm):', self, 34.0, 30.0 )
#next path press xy
self.nextPathPressXY = settings.FloatSpin().getFromValue( 4.0, 'Next path press XY (mm):', self, 34.0, 0.4 )
#extruder early stop xy
self.extruderEarlyStopXY = settings.FloatSpin().getFromValue( 4.0, 'Extruder early stop XY (mm):', self, 34.0, 0.4 )
#extruder oozestep feed
#set in Dimension plugin
#extrusion multiplier - NOT USED
#self.extrusionMultiplier = settings.FloatSpin().getFromValue( 0, 'Extrusion multiplier:', self, 255, 1.0 )
self.tempAtLayer = settings.StringSetting().getFromValue('Bed T at layer, (Layer,Temp;Layer,Temp;...):', self, '4,120;7,110;10,100' )
#Create the archive, title of the execute button, title of the dialog & settings fileName.
self.executeTitle = 'oozestep'
def __init__(self):
'Set the default settings, execute title & settings fileName.'
skeinforge_profile.addListsToCraftTypeRepository(
'skeinforge_application.skeinforge_plugins.analyze_plugins.vectorwrite.html',
self)
self.activateVectorwrite = settings.BooleanSetting().getFromValue(
'Activate Vectorwrite', self, False)
self.fileNameInput = settings.FileNameInput().getFromFileName(
[('Gcode text files', '*.gcode')],
'Open File to Write Vector Graphics for', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute(
'http://fabmetheus.crsndoo.com/wiki/index.php/Skeinforge_Vectorwrite'
)
self.addLayerTemplateToSVG = settings.BooleanSetting().getFromValue(
'Add Layer Template to SVG', self, True)
self.addLoops = settings.BooleanSetting().getFromValue(
'Add Loops', self, True)
self.addPaths = settings.BooleanSetting().getFromValue(
'Add Paths', self, True)
self.addPerimeters = settings.BooleanSetting().getFromValue(
'Add Perimeters', self, True)
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- Layers -', self)
self.layersFrom = settings.IntSpin().getFromValue(
0, 'Layers From (index):', self, 20, 0)
self.layersTo = settings.IntSpin().getSingleIncrementFromValue(
0, 'Layers To (index):', self, 912345678, 912345678)
settings.LabelSeparator().getFromRepository(self)
self.svgViewer = settings.StringSetting().getFromValue(
'SVG Viewer:', self, 'webbrowser')
settings.LabelSeparator().getFromRepository(self)
self.executeTitle = 'Vectorwrite'
def __init__(self):
"Set the default settings, execute title & settings fileName."
skeinforge_profile.addListsToCraftTypeRepository(
'skeinforge_application.skeinforge_plugins.craft_plugins.cleave.html',
self)
self.fileNameInput = settings.FileNameInput().getFromFileName(
fabmetheus_interpret.getTranslatorFileTypeTuples(),
'Open File to be Cleaved', self, '')
self.addLayerTemplateToSVG = settings.BooleanSetting().getFromValue(
'Add Layer Template to SVG', self, True)
self.edgeWidth = settings.FloatSpin().getFromValue(
0.4, 'Edge Width (mm):', self, 4.0, 2.0)
self.extraDecimalPlaces = settings.FloatSpin().getFromValue(
0.0, 'Extra Decimal Places (float):', self, 3.0, 2.0)
self.importCoarseness = settings.FloatSpin().getFromValue(
0.5, 'Import Coarseness (ratio):', self, 2.0, 1.0)
self.layerHeight = settings.FloatSpin().getFromValue(
0.1, 'Layer Height (mm):', self, 1.0, 0.4)
self.layersFrom = settings.IntSpin().getFromValue(
0, 'Layers From (index):', self, 20, 0)
self.layersTo = settings.IntSpin().getSingleIncrementFromValue(
0, 'Layers To (index):', self, 912345678, 912345678)
self.meshTypeLabel = settings.LabelDisplay().getFromName(
'Mesh Type: ',
self,
)
importLatentStringVar = settings.LatentStringVar()
self.correctMesh = settings.Radio().getFromRadio(
importLatentStringVar, 'Correct Mesh', self, True)
self.unprovenMesh = settings.Radio().getFromRadio(
importLatentStringVar, 'Unproven Mesh', self, False)
self.svgViewer = settings.StringSetting().getFromValue(
'SVG Viewer:', self, 'webbrowser')
settings.LabelSeparator().getFromRepository(self)
self.executeTitle = 'Cleave'
def __init__(self):
'Set the default settings, execute title & settings fileName.'
skeinforge_profile.addListsToCraftTypeRepository('skeinforge_application.skeinforge_plugins.craft_plugins.export.html', self)
self.fileNameInput = settings.FileNameInput().getFromFileName( fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(), 'Open File for Export', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromDocumentationSubName('skeinforge_application.skeinforge_plugins.craft_plugins.export.html')
self.activateExport = settings.BooleanSetting().getFromValue('Activate Export', self, True)
self.addDescriptiveExtension = settings.BooleanSetting().getFromValue('Add Descriptive Extension', self, False)
self.addExportSuffix = settings.BooleanSetting().getFromValue('Add Export Suffix', self, True)
self.addProfileExtension = settings.BooleanSetting().getFromValue('Add Profile Extension', self, False)
self.addTimestampExtension = settings.BooleanSetting().getFromValue('Add Timestamp Extension', self, False)
self.alsoSendOutputTo = settings.StringSetting().getFromValue('Also Send Output To:', self, '')
self.analyzeGcode = settings.BooleanSetting().getFromValue('Analyze Gcode', self, True)
self.commentLabel = settings.LabelDisplay().getFromName('Comment Deletion Choices:', self)
self.deleteKeepComments = settings.BooleanSetting().getFromValue('Delete <keep> Comments', self, False)
self.deleteTraceComments = settings.BooleanSetting().getFromValue('Delete Trace Comments', self, False)
self.deleteLayerComments = settings.BooleanSetting().getFromValue('Delete <layer> Comments', self, False)
self.deleteSettingsComments = settings.BooleanSetting().getFromValue('Delete Settings Comments', self, False)
self.deleteInitialisationComments = settings.BooleanSetting().getFromValue('Delete Other Initialisation Comments', self, False)
self.deletePrefaceComments = settings.BooleanSetting().getFromValue('Delete Other Preface Comments', self, False)
self.deleteCraftingComments = settings.BooleanSetting().getFromValue('Delete Other Crafting Comments', self, False)
self.deleteTaggedComments = settings.BooleanSetting().getFromValue('Delete Other Tagged Comments', self, False)
self.deleteStarredComments = settings.BooleanSetting().getFromValue('Delete Other Starred Comments', self, False)
self.deleteOtherComments = settings.BooleanSetting().getFromValue('Delete All Other Comments', self, False)
exportPluginsFolderPath = archive.getAbsoluteFrozenFolderPath(archive.getCraftPluginsDirectoryPath('export.py'), 'export_plugins')
exportStaticDirectoryPath = os.path.join(exportPluginsFolderPath, 'static_plugins')
exportPluginFileNames = archive.getPluginFileNamesFromDirectoryPath(exportPluginsFolderPath)
exportStaticPluginFileNames = archive.getPluginFileNamesFromDirectoryPath(exportStaticDirectoryPath)
self.exportLabel = settings.LabelDisplay().getFromName('Export Operations: ', self)
self.exportPlugins = []
exportLatentStringVar = settings.LatentStringVar()
self.doNotChangeOutput = settings.RadioCapitalized().getFromRadio(exportLatentStringVar, 'Do Not Change Output', self, True)
self.doNotChangeOutput.directoryPath = None
allExportPluginFileNames = exportPluginFileNames + exportStaticPluginFileNames
for exportPluginFileName in allExportPluginFileNames:
exportPlugin = None
if exportPluginFileName in exportPluginFileNames:
path = os.path.join(exportPluginsFolderPath, exportPluginFileName)
exportPlugin = settings.RadioCapitalizedButton().getFromPath(exportLatentStringVar, exportPluginFileName, path, self, False)
exportPlugin.directoryPath = exportPluginsFolderPath
else:
exportPlugin = settings.RadioCapitalized().getFromRadio(exportLatentStringVar, exportPluginFileName, self, False)
exportPlugin.directoryPath = exportStaticDirectoryPath
self.exportPlugins.append(exportPlugin)
self.fileExtension = settings.StringSetting().getFromValue('File Extension:', self, 'gcode')
self.nameOfReplaceFile = settings.StringSetting().getFromValue('Name of Replace File:', self, 'replace.csv')
self.savePenultimateGcode = settings.BooleanSetting().getFromValue('Save Penultimate Gcode', self, False)
self.executeTitle = 'Export'
def __init__(self):
"Set the default settings, execute title & settings fileName."
skeinforge_profile.addListsToCraftTypeRepository('skeinforge_application.skeinforge_plugins.craft_plugins.bottom.html', self )
self.fileNameInput = settings.FileNameInput().getFromFileName(fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(), 'Open File for Bottom', self, '')
self.activateBottom = settings.BooleanSetting().getFromValue('Activate Bottom:', self, True )
self.altitude = settings.FloatSpin().getFromValue(-1.0, 'Altitude (mm):', self, 1.0, 0.0)
self.svgViewer = settings.StringSetting().getFromValue('SVG Viewer:', self, 'webbrowser')
self.executeTitle = 'Bottom'
def __init__(self):
"Set the default settings, execute title & settings fileName."
settings.addListsToRepository('skeinforge_application.skeinforge_plugins.analyze_plugins.interpret.html', '', self )
self.fileNameInput = settings.FileNameInput().getFromFileName( getGNUTranslatorGcodeFileTypeTuples(), 'Open File for Interpret', self, '')
self.activateInterpret = settings.BooleanSetting().getFromValue('Activate Interpret', self, False )
self.printInterpretion = settings.BooleanSetting().getFromValue('Print Interpretion', self, False )
self.textProgram = settings.StringSetting().getFromValue('Text Program:', self, 'webbrowser')
self.executeTitle = 'Interpret'
def __init__(self):
"Set the default settings, execute title & settings fileName."
skeinforge_profile.addListsToCraftTypeRepository('skeinforge_application.skeinforge_plugins.craft_plugins.home.html', self)
self.fileNameInput = settings.FileNameInput().getFromFileName( fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(), 'Open File for Home', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromDocumentationSubName('skeinforge_application.skeinforge_plugins.craft_plugins.home.html')
self.activateHome = settings.BooleanSetting().getFromValue('Activate Home', self, True )
self.nameOfHomeFile = settings.StringSetting().getFromValue('Name of Home File:', self, 'home.gcode')
self.executeTitle = 'Home'
def __init__(self):
"Set the default settings, execute title & settings fileName."
skeinforge_profile.addListsToCraftTypeRepository(
'skeinforge_application.skeinforge_plugins.craft_plugins.bookend.html',
self)
self.fileNameInput = settings.FileNameInput().getFromFileName(
fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(),
'Open File for Bookend', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute(
'http://fabmetheus.crsndoo.com/wiki/index.php/Skeinforge_Bookend')
self.activateBookend = settings.BooleanSetting().getFromValue(
'Activate Bookend', self, True)
self.nameOfEndFile = settings.StringSetting().getFromValue(
'Name of End File:', self, 'end.gcode')
self.nameOfStartFile = settings.StringSetting().getFromValue(
'Name of Start File:', self, 'start.gcode')
self.executeTitle = 'Bookend'
def __init__(self):
"Set the default settings, execute title & settings fileName."
settings.addListsToRepository('skeinforge_application.skeinforge_plugins.craft_plugins.home.html', None, self )
self.fileNameInput = settings.FileNameInput().getFromFileName( fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(), 'Open File for Home', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute('http://fabmetheus.crsndoo.com/wiki/index.php/Skeinforge_home')
self.activateHome = settings.BooleanSetting().getFromValue('Activate Home', self, True )
self.nameOfHomingFile = settings.StringSetting().getFromValue('Name of Homing File:', self, 'homing.gcode')
self.executeTitle = 'Home'
def __init__(self):
"Set the default settings, execute title & settings fileName."
skeinforge_profile.addListsToCraftTypeRepository('skeinforge_application.skeinforge_plugins.analyze_plugins.interpret.html', self)
self.fileNameInput = settings.FileNameInput().getFromFileName( getGNUTranslatorGcodeFileTypeTuples(), 'Open File for Interpret', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute('http://fabmetheus.crsndoo.com/wiki/index.php/Skeinforge_Interpret')
self.activateInterpret = settings.BooleanSetting().getFromValue('Activate Interpret', self, False )
self.printInterpretion = settings.BooleanSetting().getFromValue('Print Interpretion', self, False )
self.textProgram = settings.StringSetting().getFromValue('Text Program:', self, 'webbrowser')
self.executeTitle = 'Interpret'
def __init__(self):
'Set the default settings, execute title & settings fileName.'
skeinforge_profile.addListsToCraftTypeRepository('skeinforge_application.skeinforge_plugins.analyze_plugins.clairvoyance.html', self)
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromDocumentationSubName('skeinforge_application.skeinforge_plugins.analyze_plugins.clairvoyance.html')
self.activateClairvoyance = settings.BooleanSetting().getFromValue('Activate Clairvoyance', self, False)
settings.LabelSeparator().getFromRepository(self)
self.fileNameInput = settings.FileNameInput().getFromFileName([('Gcode text files', '*.gcode')], 'Open File to Generate Clairvoyances for', self, '')
self.gcodeProgram = settings.StringSetting().getFromValue('Gcode Program:', self, 'webbrowser')
self.executeTitle = 'Clairvoyance'
def __init__(self):
"Set the default settings, execute title & settings fileName."
skeinforge_profile.addListsToCraftTypeRepository('skeinforge_application.skeinforge_plugins.craft_plugins.scale.html', self )
self.fileNameInput = settings.FileNameInput().getFromFileName(fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(), 'Open File for Scale', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute('http://fabmetheus.crsndoo.com/wiki/index.php/Skeinforge_Scale')
self.activateScale = settings.BooleanSetting().getFromValue('Activate Scale', self, False)
self.xyPlaneScale = settings.FloatSpin().getFromValue(0.99, 'XY Plane Scale (ratio):', self, 1.03, 1.01)
self.zAxisScale = settings.FloatSpin().getFromValue(0.99, 'Z Axis Scale (ratio):', self, 1.02, 1.0)
self.svgViewer = settings.StringSetting().getFromValue('SVG Viewer:', self, 'webbrowser')
self.executeTitle = 'Scale'
def __init__(self):
"Set the default settings, execute title & settings fileName."
skeinforge_profile.addListsToCraftTypeRepository(
'skeinforge_application.skeinforge_plugins.craft_plugins.bottom.html', self)
self.fileNameInput = settings.FileNameInput().getFromFileName(
fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(), 'Open File for Bottom', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute('http://fabmetheus.crsndoo.com/wiki/index.php/Skeinforge_Bottom')
self.activateBottom = settings.BooleanSetting().getFromValue('Activate Bottom', self, True)
self.additionalHeightOverLayerThickness = settings.FloatSpin().getFromValue(
0.0, 'Additional Height over Layer Thickness (ratio):', self, 1.0, 0.5)
self.altitude = settings.FloatSpin().getFromValue(-1.0, 'Altitude (mm):', self, 1.0, 0.0)
self.svgViewer = settings.StringSetting().getFromValue('SVG Viewer:', self, 'webbrowser')
self.executeTitle = 'Bottom'
def __init__(self):
"Set the default settings, execute title & settings fileName."
skeinforge_profile.addListsToCraftTypeRepository(
'skeinforge_application.skeinforge_plugins.craft_plugins.scale.html',
self)
self.fileNameInput = settings.FileNameInput().getFromFileName(
fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(),
'Open File for Scale', self, '')
self.activateScale = settings.BooleanSetting().getFromValue(
'Activate Scale to finetune print size (try to find the fault somewhere else..):',
self, False)
self.xyPlaneScale = settings.FloatSpin().getFromValue(
0.90, 'XY Plane Scale (ratio):', self, 1.10, 1.00)
self.zAxisScale = settings.FloatSpin().getFromValue(
0.90, 'Z Axis Scale (ratio):', self, 1.10, 1.0)
self.svgViewer = settings.StringSetting().getFromValue(
'SVG Viewer:', self, 'webbrowser')
self.executeTitle = 'Scale'
def __init__(self):
"Set the default settings, execute title & settings fileName."
skeinforge_profile.addListsToCraftTypeRepository(
'skeinforge_application.skeinforge_plugins.craft_plugins.carve.html',
self)
self.fileNameInput = settings.FileNameInput().getFromFileName(
fabmetheus_interpret.getTranslatorFileTypeTuples(),
'Open File for Carve', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute(
'http://www.bitsfrombytes.com/wiki/index.php?title=Skeinforge_Carve'
)
self.addLayerTemplateToSVG = settings.BooleanSetting().getFromValue(
'Add Layer Template to SVG', self, True)
self.bridgeThicknessMultiplier = settings.FloatSpin().getFromValue(
0.8, 'Bridge Thickness Multiplier (ratio):', self, 1.2, 1.0)
self.extraDecimalPlaces = settings.FloatSpin().getFromValue(
0.0, 'Extra Decimal Places (float):', self, 2.0, 1.0)
self.importCoarseness = settings.FloatSpin().getFromValue(
0.5, 'Import Coarseness (ratio):', self, 2.0, 1.0)
self.infillDirectionBridge = settings.BooleanSetting().getFromValue(
'Infill in Direction of Bridges', self, True)
self.layerThickness = settings.FloatSpin().getFromValue(
0.1, 'Layer Thickness (mm):', self, 1.0, 0.4)
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- Layers -', self)
self.layersFrom = settings.IntSpin().getFromValue(
0, 'Layers From (index):', self, 20, 0)
self.layersTo = settings.IntSpin().getSingleIncrementFromValue(
0, 'Layers To (index):', self, 912345678, 912345678)
settings.LabelSeparator().getFromRepository(self)
self.meshTypeLabel = settings.LabelDisplay().getFromName(
'Mesh Type: ', self)
importLatentStringVar = settings.LatentStringVar()
self.correctMesh = settings.Radio().getFromRadio(
importLatentStringVar, 'Correct Mesh', self, True)
self.unprovenMesh = settings.Radio().getFromRadio(
importLatentStringVar, 'Unproven Mesh', self, False)
self.perimeterWidthOverThickness = settings.FloatSpin().getFromValue(
1.4, 'Perimeter Width over Thickness (ratio):', self, 2.2, 1.8)
settings.LabelSeparator().getFromRepository(self)
self.svgViewer = settings.StringSetting().getFromValue(
'SVG Viewer:', self, 'webbrowser')
settings.LabelSeparator().getFromRepository(self)
self.executeTitle = 'Carve'
def __init__(self):
'Set the default settings, execute title & settings fileName.'
skeinforge_profile.addListsToCraftTypeRepository(
'skeinforge_application.skeinforge_plugins.craft_plugins.export.html',
self)
self.fileNameInput = settings.FileNameInput().getFromFileName(
fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(),
'Open File for Export', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute(
'http://fabmetheus.crsndoo.com/wiki/index.php/Skeinforge_Export')
self.activateExport = settings.BooleanSetting().getFromValue(
'Activate Export', self, True)
self.addExportSuffix = settings.BooleanSetting().getFromValue(
'Add _export to filename (filename_export)', self, True)
self.alsoSendOutputTo = settings.StringSetting().getFromValue(
'Also Send Output To:', self, '')
self.analyzeGcode = settings.BooleanSetting().getFromValue(
'Analyze Gcode', self, True)
self.commentChoice = settings.MenuButtonDisplay().getFromName(
'Handling of Comments in G-Code:', self)
self.doNotDeleteComments = settings.MenuRadio(
).getFromMenuButtonDisplay(self.commentChoice,
'Do Not Delete Comments', self, False)
self.deleteCraftingComments = settings.MenuRadio(
).getFromMenuButtonDisplay(self.commentChoice,
'Delete Crafting Comments', self, False)
self.deleteAllComments = settings.MenuRadio().getFromMenuButtonDisplay(
self.commentChoice, 'Delete All Comments', self, True)
exportPluginsFolderPath = archive.getAbsoluteFrozenFolderPath(
archive.getCraftPluginsDirectoryPath('export.py'),
'export_plugins')
exportStaticDirectoryPath = os.path.join(exportPluginsFolderPath,
'static_plugins')
exportPluginFileNames = archive.getPluginFileNamesFromDirectoryPath(
exportPluginsFolderPath)
exportStaticPluginFileNames = archive.getPluginFileNamesFromDirectoryPath(
exportStaticDirectoryPath)
settings.LabelDisplay().getFromName(' ', self)
self.exportLabel = settings.LabelDisplay().getFromName(
'--Export Operations-- ', self)
self.exportPlugins = []
exportLatentStringVar = settings.LatentStringVar()
self.doNotChangeOutput = settings.RadioCapitalized().getFromRadio(
exportLatentStringVar, 'Do Not Change Output', self, True)
self.doNotChangeOutput.directoryPath = None
allExportPluginFileNames = exportPluginFileNames + exportStaticPluginFileNames
for exportPluginFileName in allExportPluginFileNames:
exportPlugin = None
if exportPluginFileName in exportPluginFileNames:
path = os.path.join(exportPluginsFolderPath,
exportPluginFileName)
exportPlugin = settings.RadioCapitalizedButton().getFromPath(
exportLatentStringVar, exportPluginFileName, path, self,
False)
exportPlugin.directoryPath = exportPluginsFolderPath
else:
exportPlugin = settings.RadioCapitalized().getFromRadio(
exportLatentStringVar, exportPluginFileName, self, False)
exportPlugin.directoryPath = exportStaticDirectoryPath
self.exportPlugins.append(exportPlugin)
self.fileExtension = settings.StringSetting().getFromValue(
'File Extension (gcode):', self, 'gcode')
self.nameOfReplaceFile = settings.StringSetting().getFromValue(
'Name of Replace File:', self, 'replace.csv')
self.savePenultimateGcode = settings.BooleanSetting().getFromValue(
'Save Penultimate Gcode', self, True)
settings.LabelDisplay().getFromName(' ', self)
settings.LabelDisplay().getFromName('--File Name Alterations--', self)
settings.LabelDisplay().getFromName(
'"WARNING" IF ANY OF BELOW CHECKBOXES ARE CHECKED', self)
settings.LabelDisplay().getFromName(
'SFACT WILL NOT WORK FROM WITHIN PRONTERFACE!!', self)
self.addProfileExtension = settings.BooleanSetting().getFromValue(
'Add Profile Extension', self, False)
self.addDescriptiveExtension = settings.BooleanSetting().getFromValue(
'Add Descriptive Extension', self, False)
self.addTimestampExtension = settings.BooleanSetting().getFromValue(
'Add Timestamp Extension', self, False)
self.executeTitle = 'Export'
def __init__(self):
'Set the default settings, execute title & settings fileName.'
skeinforge_profile.addListsToCraftTypeRepository(
'skeinforge_application.skeinforge_plugins.craft_plugins.export.html',
self)
self.fileNameInput = settings.FileNameInput().getFromFileName(
fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(),
'Open File for Export', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute(
'http://fabmetheus.crsndoo.com/wiki/index.php/Skeinforge_Export')
self.activateExport = settings.BooleanSetting().getFromValue(
'Activate Export', self, True)
self.addExportSuffix = settings.BooleanSetting().getFromValue(
'Add Export Suffix', self, True)
self.alsoSendOutputTo = settings.StringSetting().getFromValue(
'Also Send Output To:', self, '')
self.commentChoice = settings.MenuButtonDisplay().getFromName(
'Comment Choice:', self)
self.doNotDeleteComments = settings.MenuRadio(
).getFromMenuButtonDisplay(self.commentChoice,
'Do Not Delete Comments', self, False)
self.deleteCraftingComments = settings.MenuRadio(
).getFromMenuButtonDisplay(self.commentChoice,
'Delete Crafting Comments', self, False)
self.deleteAllComments = settings.MenuRadio().getFromMenuButtonDisplay(
self.commentChoice, 'Delete All Comments', self, True)
exportPluginsFolderPath = archive.getAbsoluteFrozenFolderPath(
__file__, 'export_plugins')
exportStaticDirectoryPath = os.path.join(exportPluginsFolderPath,
'static_plugins')
exportPluginFileNames = archive.getPluginFileNamesFromDirectoryPath(
exportPluginsFolderPath)
exportStaticPluginFileNames = archive.getPluginFileNamesFromDirectoryPath(
exportStaticDirectoryPath)
self.exportLabel = settings.LabelDisplay().getFromName(
'Export Operations: ', self)
self.exportPlugins = []
exportLatentStringVar = settings.LatentStringVar()
self.doNotChangeOutput = settings.RadioCapitalized().getFromRadio(
exportLatentStringVar, 'Do Not Change Output', self, True)
self.doNotChangeOutput.directoryPath = None
allExportPluginFileNames = exportPluginFileNames + exportStaticPluginFileNames
for exportPluginFileName in allExportPluginFileNames:
exportPlugin = None
if exportPluginFileName in exportPluginFileNames:
path = os.path.join(exportPluginsFolderPath,
exportPluginFileName)
exportPlugin = settings.RadioCapitalizedButton().getFromPath(
exportLatentStringVar, exportPluginFileName, path, self,
False)
exportPlugin.directoryPath = exportPluginsFolderPath
else:
exportPlugin = settings.RadioCapitalized().getFromRadio(
exportLatentStringVar, exportPluginFileName, self, False)
exportPlugin.directoryPath = exportStaticDirectoryPath
self.exportPlugins.append(exportPlugin)
self.fileExtension = settings.StringSetting().getFromValue(
'File Extension:', self, 'gcode')
self.profileFileExtension = settings.BooleanSetting().getFromValue(
'Add Profile To File Extension', self, False)
self.archiveProfile = settings.BooleanSetting().getFromValue(
'Archive Used Profile As Zip', self, False)
self.exportProfileAsCsv = settings.BooleanSetting().getFromValue(
'Export Profile Values As CSV File', self, False)
self.descriptiveExtension = settings.BooleanSetting().getFromValue(
'Add Descriptive Extension', self, False)
self.timestampExtension = settings.BooleanSetting().getFromValue(
'Add Timestamp Extension', self, False)
self.nameOfReplaceFile = settings.StringSetting().getFromValue(
'Name of Replace File:', self, 'replace.csv')
self.savePenultimateGcode = settings.BooleanSetting().getFromValue(
'Save Penultimate Gcode', self, False)
self.executeTitle = 'Export'