def run_analysis(self, argv):
"""Run this analysis"""
args = self._parser.parse_args(argv)
if not HAVE_ST:
raise RuntimeError(
"Trying to run fermipy analysis, but don't have ST")
if is_not_null(args.roi_baseline):
gta = GTAnalysis.create(args.roi_baseline, args.config)
else:
gta = GTAnalysis(args.config,
logging={'verbosity': 3},
fileio={'workdir_regex': '\.xml$|\.npy$'})
gta.print_roi()
test_source = args.target
gta.sed(test_source, outfile='sed_%s.fits' % 'FL8Y', make_plots=True)
gta.extension(test_source, make_plots=True)
return gta
def run_analysis(config):
print('Running analysis...')
gta = GTAnalysis(config)
gta.setup()
gta.optimize()
gta.print_roi()
# Localize and generate SED for first source in ROI
srcname = gta.roi.sources[0].name
gta.free_source(srcname)
gta.fit()
gta.localize(srcname)
gta.sed(srcname)
gta.write_roi('roi', make_plots=True)
gta.tsmap(make_plots=True)
gta.residmap(make_plots=True)
fit_res = gta.optimize()
fit_res = gta.fit()
gta.write_roi('fit_testsrc')
print '# Test source fitted successfully... #'
if gta.roi[srcname]._data['ts']>25:
print '# ...and we have a significant detection! (TS='+str(gta.roi[srcname]._data['ts'])+') Localizing... #'
loc=gta.localize(srcname, update=True)
if loc['fit_success']==True:
print '# Localization succeeded! #'
print '#Final optimization run...#'
fit_res = gta.optimize()
gta.write_roi('fit_detected_localized_optimized')
else:
print '# Localization failed! #'
print '# Running SED...#'
sed = gta.sed(srcname,make_plots=True)
else:
print '# ...but the source is not significantly detected (TS='+str(gta.roi[srcname]._data['ts'])+') #'
print '# Writing source properties to outfile.dat #'
outfile=open('outfile.dat','w')
outfile.write('ROI data for source close to target:\n')
outfile.write(str(gta.roi.sources[0]))
outfile.write('\nROI center offset\t:\t'+str(gta.roi.sources[0]._data['offset'])+' degrees')
if gta.roi[srcname]._data['ts']<25:
outfile.write('\n95% confidence flux upper limit\t:\t'+str(gta.roi.sources[0]._data['flux_ul95'])+' ph/cm**2/s')
outfile.write('\n95% confidence energy flux upper limit\t:\t'+str(1.6021766e-6*gta.roi.sources[0]._data['eflux_ul95'])+' erg/cm**2/s')
else:
outfile.write('\nEnergy flux in cgs units\t:\t'+str(1.6021766e-6*gta.roi.sources[0]._data['eflux'])+' +\- '+str(1.6021766e-6*gta.roi.sources[0]._data['eflux_err'])+' erg/cm**2/s')
outfile.close()
gta.write_roi('fit_final', make_plots = True)
else:
# Fix sources w/ significance < 10
gta.free_sources(cuts=('Detection_Significance',0,10),free=False)
# Free sources within 3 degrees of ROI center
gta.free_sources(distance=3.0)
# Free sources by name
gta.free_source('mkn421')
gta.free_source('galdiff')
gta.free_source('isodiff')
# Free only the normalization of a specific source
gta.free_norm('3FGL J1129.0+3705')
gta.fit()
# Compute the SED for a source
gta.sed('mkn421')
# Write the current state of the ROI model -- this will generate XML
# model files for each component as well as an output analysis
# dictionary in numpy and yaml formats
gta.write_roi('fit1')
gta = GTAnalysis(args.config)
gta.setup()
# Iteratively optimize all components in the ROI
gta.optimize()
# Fix sources w/ TS < 10
gta.free_sources(minmax_ts=[None, 10], free=False)
# Free sources within 3 degrees of ROI center
gta.free_sources(distance=3.0)
# Free sources by name
gta.free_source('mkn421')
gta.free_source('galdiff')
gta.free_source('isodiff')
# Free only the normalization of a specific source
gta.free_norm('3FGL J1129.0+3705')
gta.fit()
# Compute the SED for a source
gta.sed('mkn421')
# Write the current state of the ROI model -- this will generate XML
# model files for each component as well as an output analysis
# dictionary in numpy and yaml formats
gta.write_roi('fit1')
def run_analysis(self, argv):
"""Run this analysis"""
args = self._parser.parse_args(argv)
if not HAVE_ST:
raise RuntimeError(
"Trying to run fermipy analysis, but don't have ST")
if is_null(args.skydirs):
skydir_dict = None
else:
skydir_dict = load_yaml(args.skydirs)
gta = GTAnalysis(args.config,
logging={'verbosity': 3},
fileio={'workdir_regex': '\.xml$|\.npy$'})
#gta.setup(overwrite=False)
gta.load_roi(args.roi_baseline)
gta.print_roi()
basedir = os.path.dirname(args.config)
# This should be a no-op, b/c it was done in the baseline analysis
for profile in args.profiles:
if skydir_dict is None:
skydir_keys = [None]
else:
skydir_keys = sorted(skydir_dict.keys())
for skydir_key in skydir_keys:
if skydir_key is None:
pkey, psrc_name, pdict = build_profile_dict(basedir, profile)
else:
skydir_val = skydir_dict[skydir_key]
pkey, psrc_name, pdict = build_profile_dict(basedir, profile)
pdict['ra'] = skydir_val['ra']
pdict['dec'] = skydir_val['dec']
pkey += "_%06i" % skydir_key
outfile = "sed_%s.fits" % pkey
# Add the source and get the list of correlated soruces
correl_dict, test_src_name = add_source_get_correlated(gta, psrc_name,
pdict, correl_thresh=0.25,
non_null_src=args.non_null_src)
# Write the list of correlated sources
correl_yaml = os.path.join(basedir, "correl_%s.yaml" % pkey)
write_yaml(correl_dict, correl_yaml)
gta.free_sources(False)
for src_name in correl_dict.keys():
gta.free_source(src_name, pars='norm')
# build the SED
if args.non_null_src:
gta.update_source(test_src_name, reoptimize=True)
gta.write_roi("base_%s"% pkey, make_plots=False)
gta.sed(test_src_name, prefix=pkey, outfile=outfile, make_plots=args.make_plots)
# remove the source
gta.delete_source(test_src_name)
# put the ROI back to how it was
gta.load_xml(args.roi_baseline)
return gta
def FGES_BinnedAnalysis(prefix, ANALYSISDIR, numsources, xmlsources, spectrum,
spectrumpoints, spectrumpointsUL, spectrum_mev_or_erg,
spectrum_mev_or_tev, configfile):
ANALYSISDIR = ANALYSISDIR + prefix + '/'
i = numsources #number of sources
sources_names = ''
for x in range(0, i):
sources_names += str(xmlsources[x])
#Run the likelihood analysis up to doing the fit
gta = GTAnalysis(ANALYSISDIR + configfile, logging={'verbosity': 3})
gta.setup()
#Print the pre likelihood fit parameters
gta.print_roi()
for x in range(0, i):
print(gta.roi[xmlsources[x]])
#Do an initial optimization of parameters
gta.optimize()
gta.print_roi()
#Prepare to get the likelihood
#Free the normalizations of sources within 7 degrees of the center of the field of view
gta.free_sources(distance=7.0, pars='norm')
gta.free_source('galdiff')
gta.free_source('isodiff')
for x in range(0, i):
gta.free_source(xmlsources[x])
#LIKELIHOOD ANALYSIS
fit_results = gta.fit()
#print out and return the results
print('Fit Quality: ', fit_results['fit_quality'])
for x in range(0, i):
print(gta.roi[xmlsources[x]])
gta.write_roi(sources_names + 'fit')
#RESIDUAL MAP
model = {'Index': 2.0, 'SpatialModel': 'PointSource'}
maps = gta.residmap('residual', model=model, make_plots=True)
# Generate residual map with source of interest removed from the model
model_nosource = {'Index': 2.0, 'SpatialModel': 'PointSource'}
maps_nosource = gta.residmap('residual_wsource',
model=model_nosource,
exclude=xmlsources,
make_plots=True)
#TS Map
tsmap = gta.tsmap('tsmap',
model={
'SpatialModel': 'PointSource',
'Index': 2.0
},
exclude=xmlsources,
make_plots=True)
tsmap_wSNR = gta.tsmap('tsmap_wSNR',
model={
'SpatialModel': 'PointSource',
'Index': 2.0
},
make_plots=True)
#PLOT SEDs
for x in range(0, i):
c = np.load('10to500gev/' + sources_names + 'fit.npy').flat[0]
sorted(c['sources'].keys())
c['sources'][xmlsources[x]]['flux']
print(c['sources'][xmlsources[x]]['param_names'][:4])
print(c['sources'][xmlsources[x]]['param_values'][:4])
c['sources'][xmlsources[x]]['ts']
E = np.array(c['sources'][xmlsources[x]]['model_flux']['energies'])
dnde = np.array(c['sources'][xmlsources[x]]['model_flux']['dnde'])
dnde_hi = np.array(
c['sources'][xmlsources[x]]['model_flux']['dnde_hi'])
dnde_lo = np.array(
c['sources'][xmlsources[x]]['model_flux']['dnde_lo'])
if spectrum_mev_or_erg == "erg":
suffix = 'erg'
mult = 0.00000160218
elif spectrum_mev_or_erg == "mev":
suffix = 'MeV'
mult = 1
if spectrum_mev_or_tev == "mev":
xaxis = 'MeV'
denominator = 1
elif spectrum_mev_or_tev == "tev":
xaxis = 'TeV'
denominator = 1000000
if spectrum:
plt.loglog(E, (E**2) * dnde, 'k--')
plt.loglog(E, (E**2) * dnde_hi, 'k')
plt.loglog(E, (E**2) * dnde_lo, 'k')
plt.xlabel('E [MeV]')
plt.ylabel(r'E$^2$ dN/dE [MeV cm$^{-2}$ s$^{-1}$]')
plt.savefig('spectrum_' + xmlsources[x] + '.png')
#GET SED POINTS
if spectrumpoints:
sed = gta.sed(xmlsources[x], make_plots=True)
#sed = gta.sed(xmlsource,prefix=xmlsource + 'spectrum',loge_bins=)
src = gta.roi[xmlsources[x]]
#Plot without upper limits
plt.loglog(E, (E**2) * dnde, 'k--')
plt.loglog(E, (E**2) * dnde_hi, 'k')
plt.loglog(E, (E**2) * dnde_lo, 'k')
plt.errorbar(np.array(sed['e_ctr']),
sed['e2dnde'],
yerr=sed['e2dnde_err'],
fmt='o')
plt.xlabel('E [MeV]')
plt.ylabel(r'E$^{2}$ dN/dE [MeV cm$^{-2}$ s$^{-1}$]')
#plt.show()
plt.savefig('spectrumpoints_' + xmlsources[x] + '.png')
#Plot with upper limits, last 5 points
plt.loglog(E, (E**2) * dnde, 'k--')
plt.loglog(E, (E**2) * dnde_hi, 'k')
plt.loglog(E, (E**2) * dnde_lo, 'k')
plt.errorbar(sed['e_ctr'][:-5],
sed['e2dnde'][:-5],
yerr=sed['e2dnde_err'][:-5],
fmt='o')
plt.errorbar(np.array(sed['e_ctr'][-5:]),
sed['e2dnde_ul95'][-5:],
yerr=0.2 * sed['e2dnde_ul95'][-5:],
fmt='o',
uplims=True)
plt.xlabel('E [MeV]')
plt.ylabel(r'E$^{2}$ dN/dE [MeV cm$^{-2}$ s$^{-1}$]')
plt.savefig('spectrumpointsUL_' + xmlsources[x] + '.png')
plt.clf()
def main():
usage = "usage: %(prog)s [config file]"
description = "Run fermipy analysis chain."
parser = argparse.ArgumentParser(usage=usage, description=description)
parser.add_argument('--config', default='sample_config.yaml')
parser.add_argument('--source', default=None)
args = parser.parse_args()
gta = GTAnalysis(args.config,
logging={'verbosity': 3},
fileio={'workdir_regex': '\.xml$|\.npy$'})
model0 = {'SpatialModel': 'PointSource', 'Index': 1.5}
model1 = {'SpatialModel': 'PointSource', 'Index': 2.0}
model2 = {'SpatialModel': 'PointSource', 'Index': 2.7}
src_name = gta.config['selection']['target']
gta.setup(overwrite=True)
gta.free_sources(False)
gta.print_roi()
gta.optimize()
gta.print_roi()
exclude = []
# Localize all point sources
for s in sorted(gta.roi.sources, key=lambda t: t['ts'], reverse=True):
# for s in gta.roi.sources:
if not s['SpatialModel'] == 'PointSource':
continue
if s['offset_roi_edge'] > -0.1:
continue
if s.name in exclude:
continue
if not '3FGL' in s.name:
continue
if s.name == src_name:
continue
gta.localize(s.name,
nstep=5,
dtheta_max=0.5,
update=True,
prefix='base',
make_plots=True)
gta.optimize()
gta.print_roi()
gta.write_roi('base_roi', make_plots=True)
exclude = [src_name]
if not 'carina_2' in exclude:
exclude += ['carina_2']
if not 'carina_3' in exclude:
exclude += ['carina_3']
gta.tsmap('base', model=model0, make_plots=True, exclude=exclude)
gta.residmap('base', model=model0, make_plots=True, exclude=exclude)
gta.tsmap('base', model=model1, make_plots=True, exclude=exclude)
gta.residmap('base', model=model1, make_plots=True, exclude=exclude)
gta.tsmap('base', model=model2, make_plots=True, exclude=exclude)
gta.residmap('base', model=model2, make_plots=True, exclude=exclude)
gta.find_sources(sqrt_ts_threshold=5.0)
gta.optimize()
gta.print_roi()
gta.print_params()
gta.free_sources(skydir=gta.roi.skydir, distance=1.0, pars='norm')
gta.fit()
gta.print_roi()
gta.print_params()
gta.write_roi('fit0_roi', make_plots=True)
m = gta.tsmap('fit0', model=model0, make_plots=True, exclude=exclude)
gta.plotter.make_tsmap_plots(m, gta.roi, zoom=2, suffix='tsmap_zoom')
gta.residmap('fit0', model=model0, make_plots=True, exclude=exclude)
gta.tsmap('fit0', model=model1, make_plots=True, exclude=exclude)
gta.plotter.make_tsmap_plots(m, gta.roi, zoom=2, suffix='tsmap_zoom')
gta.residmap('fit0', model=model1, make_plots=True, exclude=exclude)
gta.tsmap('fit0', model=model2, make_plots=True, exclude=exclude)
gta.plotter.make_tsmap_plots(m, gta.roi, zoom=2, suffix='tsmap_zoom')
gta.residmap('fit0', model=model2, make_plots=True, exclude=exclude)
gta.sed(src_name, prefix='fit0', make_plots=True, free_radius=1.0)
gta.free_source(src_name)
gta.fit(reoptimize=True)
gta.print_roi()
gta.print_params()
gta.write_roi('fit1_roi', make_plots=True)
def run_analysis(self, argv):
"""Run this analysis"""
args = self._parser.parse_args(argv)
if not HAVE_ST:
raise RuntimeError(
"Trying to run fermipy analysis, but don't have ST")
if is_null(args.skydirs):
skydir_dict = None
else:
skydir_dict = load_yaml(args.skydirs)
gta = GTAnalysis(args.config,
logging={'verbosity': 3},
fileio={'workdir_regex': '\.xml$|\.npy$'})
#gta.setup(overwrite=False)
gta.load_roi(args.roi_baseline)
gta.print_roi()
basedir = os.path.dirname(args.config)
# This should be a no-op, b/c it was done in the baseline analysis
for profile in args.profiles:
if skydir_dict is None:
skydir_keys = [None]
else:
skydir_keys = sorted(skydir_dict.keys())
for skydir_key in skydir_keys:
if skydir_key is None:
pkey, pdict = AnalyzeSED._build_profile_dict(
basedir, profile)
else:
skydir_val = skydir_dict[skydir_key]
pkey, pdict = AnalyzeSED._build_profile_dict(
basedir, profile)
pdict['ra'] = skydir_val['ra']
pdict['dec'] = skydir_val['dec']
pkey += "_%06i" % skydir_key
outfile = "sed_%s.fits" % pkey
# Add the source and get the list of correlated soruces
correl_list = add_source_get_correlated(gta,
pkey,
pdict,
correl_thresh=0.25)
gta.free_sources(False)
for src_name in correl_list:
gta.free_source(src_name, pars='norm')
# build the SED
gta.sed(pkey, outfile=outfile, make_plots=args.make_plots)
# remove the source
gta.delete_source(pkey)
# put the ROI back to how it was
gta.load_xml(args.roi_baseline)
return gta