def __init__(self, model, laytyp=0, layavg=0, chani=1.0, layvka=0, laywet=0, iupwcb = 53, hdry=-1E+30, iphdry = 0,\
hk=1.0, hani=1.0, vka=1.0, ss=1e-5, sy=0.15, vkcb=0.0, noparcheck=False, \
extension='upw', unitnumber = 31):
Package.__init__(self, model, extension, 'UPW', unitnumber) # Call ancestor's init to set self.parent, extension, name and unit number
self.heading = '# UPW for MODFLOW-NWT, generated by Flopy.'
self.url = 'upw_upstream_weighting_package.htm'
nrow, ncol, nlay, nper = self.parent.nrow_ncol_nlay_nper
# item 1
self.iupwcb = iupwcb # Unit number for file with cell-by-cell flow terms
self.hdry = hdry # Head in cells that are converted to dry during a simulation
self.npupw = 0 # number of UPW parameters
self.iphdry = iphdry
self.laytyp = util_2d(model,(nlay,),np.int,laytyp,name='laytyp')
self.layavg = util_2d(model,(nlay,),np.int,layavg,name='layavg')
self.chani = util_2d(model,(nlay,),np.int,chani,name='chani')
self.layvka = util_2d(model,(nlay,),np.int,layvka,name='vka')
self.laywet = util_2d(model,(nlay,),np.int,laywet,name='laywet')
self.options = ' '
if noparcheck: self.options = self.options + 'NOPARCHECK '
self.hk = util_3d(model,(nlay,nrow,ncol),np.float32,hk,name='hk',locat=self.unit_number[0])
self.hani = util_3d(model,(nlay,nrow,ncol),np.float32,hani,name='hani',locat=self.unit_number[0])
self.vka = util_3d(model,(nlay,nrow,ncol),np.float32,vka,name='vka',locat=self.unit_number[0])
self.ss = util_3d(model,(nlay,nrow,ncol),np.float32,ss,name='ss',locat=self.unit_number[0])
self.sy = util_3d(model,(nlay,nrow,ncol),np.float32,sy,name='sy',locat=self.unit_number[0])
self.vkcb = util_3d(model,(nlay,nrow,ncol),np.float32,vkcb,name='vkcb',locat=self.unit_number[0])
self.parent.add_package(self)
def __init__(self, model, extension='list'):
#Call ancestor's init to set self.parent, extension, name and
#unit number
Package.__init__(self, model, extension, 'LIST', 7)
#self.parent.add_package(self) This package is not added to the base
#model so that it is not included in get_name_file_entries()
return
def __init__(self, model, nrchop=3, ipakcb=0, rech=1e-3, irch=0,
extension='rch', unitnumber=19):
"""
Package constructor.
"""
# Call parent init to set self.parent, extension, name and unit number
Package.__init__(self, model, extension, 'RCH', unitnumber)
nrow, ncol, nlay, nper = self.parent.nrow_ncol_nlay_nper
self.heading = '# RCH for MODFLOW, generated by Flopy.'
self.url = 'rch.htm'
self.nrchop = nrchop
if ipakcb != 0:
self.ipakcb = 53
else:
self.ipakcb = 0 # 0: no cell by cell terms are written
self.rech = Transient2d(model, (nrow, ncol), np.float32,
rech, name='rech_')
if self.nrchop == 2:
self.irch = Transient2d(model, (nrow, ncol), np.int,
irch + 1, name='irch_') # irch+1, as irch is zero based
else:
self.irch = None
self.np = 0
self.parent.add_package(self)
def __init__(self, model, nevtop=3, ipakcb=0, surf=0., evtr=1e-3, exdp=1., ievt=1,
extension ='evt', unitnumber=22, external=True):
# Call ancestor's init to set self.parent, extension, name and unit number
Package.__init__(self, model, extension, 'EVT', unitnumber)
nrow, ncol, nlay, nper = self.parent.nrow_ncol_nlay_nper
self.heading = '# EVT for MODFLOW, generated by Flopy.'
self.url = 'evt.htm'
self.nevtop = nevtop
self.ipakcb = ipakcb
self.external = external
if self.external is False:
load = True
else:
load = model.load
self.surf = transient_2d(model, (nrow, ncol), np.float32,
surf, name='surf')
self.evtr = transient_2d(model, (nrow, ncol), np.float32,
evtr, name='etvr')
self.exdp = transient_2d(model, (nrow, ncol), np.float32,
exdp, name='exdp')
self.ievt = transient_2d(model, (nrow, ncol), np.int,
ievt, name='ievt')
self.np = 0
self.parent.add_package(self)
def __init__(self,
model,
itmx=50,
mxup=0,
mxlow=0,
mxbw=0,
ifreq=3,
mutd4=0,
accl=1,
hclose=1e-5,
iprd4=1,
extension='de4',
unitnumber=28):
"""
Package constructor.
"""
Package.__init__(self, model, extension, 'de4', unitnumber)
self.heading = '# DE4 for MODFLOW, generated by Flopy.'
self.url = 'de4.htm'
self.itmx = itmx
self.mxup = mxup
self.mxlow = mxlow
self.mxbw = mxbw
self.ifreq = ifreq
self.mutd4 = mutd4
self.accl = accl
self.hclose = hclose
self.iprd4 = iprd4
self.parent.add_package(self)
return
def __init__(self, model, nrchop=3, irchcb=0, rech=1e-3, irch=1,
extension ='rch', unitnumber=19):
"""
Package constructor.
"""
# Call parent init to set self.parent, extension, name and unit number
Package.__init__(self, model, extension, 'RCH', unitnumber)
nrow, ncol, nlay, nper = self.parent.nrow_ncol_nlay_nper
self.heading = '# RCH for MODFLOW, generated by Flopy.'
self.url = 'rch.htm'
self.nrchop = nrchop
self.irchcb = irchcb
self.rech = []
self.irch = []
if (not isinstance(rech, list)):
rech = [rech]
for i,a in enumerate(rech):
r = util_2d(model,(nrow,ncol),np.float32,a,name='rech_'+str(i+1))
self.rech = self.rech + [r]
if (not isinstance(irch, list)):
irch = [irch]
for i,a in enumerate(irch):
ir = util_2d(model,(nrow,ncol),np.int,a,name='irech_'+str(i+1))
self.irch = self.irch + [ir]
self.np = 0
self.parent.add_package(self)
def __init__(self, model, nevtop=3, ipakcb=0, surf=0., evtr=1e-3, exdp=1., ievt=1,
extension ='evt', unitnumber=22, external=True):
# Call ancestor's init to set self.parent, extension, name and unit number
Package.__init__(self, model, extension, 'EVT', unitnumber)
nrow, ncol, nlay, nper = self.parent.nrow_ncol_nlay_nper
self.heading = '# EVT for MODFLOW, generated by Flopy.'
self.url = 'evt.htm'
self.nevtop = nevtop
self.ipakcb = ipakcb
self.external = external
if self.external is False:
load = True
else:
load = model.load
self.surf = transient_2d(model, (nrow, ncol), np.float32,
surf, name='surf')
self.evtr = transient_2d(model, (nrow, ncol), np.float32,
evtr, name='etvr')
self.exdp = transient_2d(model, (nrow, ncol), np.float32,
exdp, name='exdp')
self.ievt = transient_2d(model, (nrow, ncol), np.int,
ievt, name='ievt')
self.np = 0
self.parent.add_package(self)
def __init__(self,
model,
wel1flag=1,
qsumflag=1,
byndflag=1,
mnwobs=1,
wellid_unit_qndflag_qhbflag_concflag=None,
extension='mnwi',
unitnumber=58):
Package.__init__(
self, model, extension, 'MNWI', unitnumber
) # Call ancestor's init to set self.parent, extension, name, and unit number
self.url = 'mnwi.htm'
self.heading = '# Multi-node well information (MNWI) file for MODFLOW, generated by Flopy'
self.wel1flag = wel1flag #-integer flag indicating output to be written for each MNW node at the end of each stress period
self.qsumflag = qsumflag #-integer flag indicating output to be written for each multi-node well
self.byndflag = byndflag #-integer flag indicating output to be written for each MNW node
self.mnwobs = mnwobs #-number of multi-node wells for which detailed flow, head, and solute data re to be saved
self.wellid_unit_qndflag_qhbflag_concflag = wellid_unit_qndflag_qhbflag_concflag #-list of lists containing wells and related information to be output (length = [MNWOBS][4or5])
#-input format checks:
assert self.wel1flag >= 0, 'WEL1flag must be greater than or equal to zero.'
assert self.qsumflag >= 0, 'QSUMflag must be greater than or equal to zero.'
assert self.byndflag >= 0, 'BYNDflag must be greater than or equal to zero.'
if len(self.wellid_unit_qndflag_qhbflag_concflag) != self.mnwobs:
print(
'WARNING: number of listed well ids to be monitored does not match MNWOBS.'
)
self.parent.add_package(self)
def __init__(self, model, ipakcb=0, stress_period_data=None, dtype=None,
extension='wel', unitnumber=20, options=None):
"""
Package constructor.
"""
# Call parent init to set self.parent, extension, name and unit number
Package.__init__(self, model, extension, 'WEL', unitnumber)
self.heading = '# Well file for MODFLOW, generated by Flopy.'
self.url = 'wel.htm'
self.ipakcb = ipakcb # no cell by cell terms are written
self.np = 0
if options is None:
options = []
self.specify = False
for idx, opt in enumerate(options):
if 'specify' in opt:
t = opt.strip().split()
self.specify = True
self.phiramp = np.float(t[1])
self.phiramp_unit = np.int(t[2])
options.pop(idx)
break
self.options = options
self.parent.add_package(self)
if dtype is not None:
self.dtype = dtype
else:
self.dtype = self.get_default_dtype()
self.stress_period_data = mflist(model, self.dtype, stress_period_data)
def __init__(self, model, mixelm=3, percel=0.75, mxpart=800000, nadvfd=1, \
itrack=3, wd=0.5, \
dceps=1e-5, nplane=2, npl=10, nph=40, npmin=5, npmax=80, \
nlsink=0, npsink=15,
dchmoc=0.0001, extension='adv'):
Package.__init__(
self, model, extension, 'ADV', 32
) # Call ancestor's init to set self.parent, extension, name and unit number
self.mixelm = mixelm
self.percel = percel
self.mxpart = mxpart
self.nadvfd = nadvfd
self.mixelm = mixelm
self.itrack = itrack
self.wd = wd
self.dceps = dceps
self.nplane = nplane
self.npl = npl
self.nph = nph
self.npmin = npmin
self.npmax = npmax
self.interp = 1 # Command-line 'interp' might once be needed if MT3DMS is updated to include other interpolation method
self.nlsink = nlsink
self.npsink = npsink
self.dchmoc = dchmoc
self.parent.add_package(self)
def __init__(self, model, ibound=1, strt=1.0, ifrefm=True, ixsec=False,
ichflg=False, stoper=None, hnoflo=-999.99, extension='bas',
unitnumber=13):
"""
Package constructor.
"""
# Call ancestor's init to set self.parent, extension, name and unit
# number
Package.__init__(self, model, extension, 'BAS6', unitnumber)
self.url = 'bas6.htm'
nrow, ncol, nlay, nper = self.parent.nrow_ncol_nlay_nper
self.__ibound = util_3d(model, (nlay, nrow, ncol), np.int, ibound,
name='ibound', locat=self.unit_number[0])
self.strt = util_3d(model, (nlay, nrow, ncol), np.float32, strt,
name='strt', locat=self.unit_number[0])
self.heading = '# Basic package file for MODFLOW, generated by Flopy.'
self.options = ''
self.ixsec = ixsec
self.ichflg = ichflg
self.stoper = stoper
self.ifrefm = ifrefm
self.hnoflo = hnoflo
self.parent.add_package(self)
return
def __init__(self, model, mixelm=3, percel=0.75, mxpart=800000, nadvfd=1,
itrack=3, wd=0.5,
dceps=1e-5, nplane=2, npl=10, nph=40, npmin=5, npmax=80,
nlsink=0, npsink=15,
dchmoc=0.0001, extension='adv', unitnumber=None):
if unitnumber is None:
unitnumber = self.unitnumber
Package.__init__(self, model, extension, 'ADV', unitnumber)
self.mixelm = mixelm
self.percel = percel
self.mxpart = mxpart
self.nadvfd = nadvfd
self.mixelm = mixelm
self.itrack = itrack
self.wd = wd
self.dceps = dceps
self.nplane = nplane
self.npl = npl
self.nph = nph
self. npmin = npmin
self.npmax = npmax
self.interp = 1 # Command-line 'interp' might once be needed if MT3DMS is updated to include other interpolation method
self.nlsink = nlsink
self.npsink = npsink
self.dchmoc = dchmoc
self.parent.add_package(self)
return
def __init__(self,
model,
nrchop=3,
ipakcb=0,
rech=1e-3,
irch=0,
extension='rch',
unitnumber=19):
"""
Package constructor.
"""
# Call parent init to set self.parent, extension, name and unit number
Package.__init__(self, model, extension, 'RCH', unitnumber)
nrow, ncol, nlay, nper = self.parent.nrow_ncol_nlay_nper
self.heading = '# RCH for MODFLOW, generated by Flopy.'
self.url = 'rch.htm'
self.nrchop = nrchop
self.ipakcb = ipakcb
self.rech = transient_2d(model, (nrow, ncol),
np.float32,
rech,
name="rech_")
if self.nrchop == 2:
self.irch = transient_2d(
model, (nrow, ncol), np.int, irch + 1,
name="irch_") # irch+1, as irch is zero based
else:
self.irch = None
self.np = 0
self.parent.add_package(self)
def __init__(self, model, hnoflo=-9999., hdry=-8888.,
def_face_ct=0, bud_label=None, def_iface=None,
laytyp=0, ibound=1, prsity=0.30, prsityCB=0.30,
extension='mpbas', unitnumber = 86):
"""
Package constructor.
"""
Package.__init__(self, model, extension, 'MPBAS', unitnumber)
nrow, ncol, nlay, nper = self.parent.mf.nrow_ncol_nlay_nper
self.parent.mf.get_name_file_entries()
self.heading1 = '# MPBAS for Modpath, generated by Flopy.'
self.heading2 = '#'
self.hnoflo = hnoflo
self.hdry = hdry
self.def_face_ct = def_face_ct
self.bud_label = bud_label
self.def_iface = def_iface
self.laytyp = laytyp
self.__ibound = util_3d(model, (nlay, nrow, ncol), np.int, ibound,
name='ibound', locat=self.unit_number[0])
self.prsity = prsity
self.prsityCB = prsityCB
self.prsity = util_3d(model,(nlay,nrow,ncol),np.float32,\
prsity,name='prsity',locat=self.unit_number[0])
self.prsityCB = util_3d(model,(nlay,nrow,ncol),np.float32,\
prsityCB,name='prsityCB',locat=self.unit_number[0])
self.parent.add_package(self)
def __init__(self,
model,
ipakcb=0,
stress_period_data=None,
dtype=None,
no_print=False,
options=None,
extension='ghb',
unitnumber=23):
"""
Package constructor.
"""
Package.__init__(self, model, extension, 'GHB', unitnumber)
self.heading = '# GHB for MODFLOW, generated by Flopy.'
self.url = 'ghb.htm'
self.ipakcb = ipakcb # no cell by cell terms are written
self.no_print = no_print
self.np = 0
if options is None:
options = []
if self.no_print:
options.append('NOPRINT')
self.options = options
self.parent.add_package(self)
if dtype is not None:
self.dtype = dtype
else:
self.dtype = self.get_default_dtype()
self.stress_period_data = mflist(model, self.dtype, stress_period_data)
def __init__(self, model, mtdnconc=1, mfnadvfd=1, nswtcpl=1, iwtable=1,
densemin=1.000, densemax=1.025, dnscrit=1e-2, denseref=1.000,
denseslp=.025, crhoref=0, firstdt=0.001, indense=0,
dense=1.000, nsrhoeos=1, drhodprhd=4.46e-3, prhdref=0.,
extension='vdf', unitnumber=None, **kwargs):
if unitnumber is None:
unitnumber = self.unitnumber
Package.__init__(self, model, extension, 'VDF', unitnumber)
nrow, ncol, nlay, nper = self.parent.mf.nrow_ncol_nlay_nper
self.mtdnconc = kwargs.pop('mt3drhoflag', mtdnconc)
self.mfnadvfd = mfnadvfd
self.nswtcpl = nswtcpl
self.iwtable = iwtable
self.densemin = densemin
self.densemax = densemax
self.dnscrit = dnscrit
self.nsrhoeos = nsrhoeos
self.denseref = denseref
self.denseslp = kwargs.pop('drhodc', denseslp)
self.crhoref = crhoref
self.drhodprhd = drhodprhd
self.prhdref = prhdref
self.firstdt = firstdt
self.indense = indense
if dense is not None:
self.dense = Util3d(model, (nlay, nrow, ncol), np.float32, dense,
name='dense')
self.parent.add_package(self)
return
def __init__(self, model, iwelcb=0, layer_row_column_data=None,
layer_row_column_Q=None,
extension ='wel', unitnumber=20, options=None, naux=0):
"""
Package constructor.
"""
# Call parent init to set self.parent, extension, name and unit number
Package.__init__(self, model, extension, 'WEL', unitnumber)
self.heading = '# Well file for MODFLOW, generated by Flopy.'
self.url = 'wel.htm'
self.iwelcb = iwelcb # no cell by cell terms are written
if layer_row_column_data is None:
if layer_row_column_Q is not None:
print '\nWARNING: ModflowWel - Do not use layer_row_column_Q!\n'+\
' Use layer_row_column_data instead.'
layer_row_column_data = layer_row_column_Q
else:
raise Exception('Failed to specify layer_row_column_Q or layer_row_column_data.')
self.mxactw = 0
self.mxactw, self.layer_row_column_data = \
self.assign_layer_row_column_data(layer_row_column_data, 4+naux)
self.np = 0
if options is None:
options = []
self.options = options
self.parent.add_package(self)
def __init__(self, model, layer_row_column_data=None,
layer_row_column_shead_ehead=None,
cosines=None, extension='pbc', unitnumber=30, zerobase=True):
Package.__init__(self, model, extension, 'PBC',
unitnumber) # Call ancestor's init to set self.parent, extension, name and unit number
self.heading = '# PBC for MODFLOW, generated by Flopy.'
self.mxactp = 0
if layer_row_column_data is None:
if layer_row_column_shead_ehead is not None:
print('\nWARNING: ModflowPbc - Do not use layer_row_column_shead_ehead!\n' + \
' Use layer_row_column_data instead.')
layer_row_column_data = layer_row_column_shead_ehead
else:
raise Exception('Failed to specify layer_row_column_shead_ehead or layer_row_column_data.')
self.mxactp, self.layer_row_column_data = self.assign_layer_row_column_data(layer_row_column_data, 5,
zerobase=zerobase)
self.mxcos, self.cosines = self.assign_layer_row_column_data(cosines, 3,
zerobase=False) # misuse of this function - zerobase needs to be False
'''self.mxcos = 0
if (cosines != None):
error_message = 'cosines must have 3 columns'
if (not isinstance(cosines, list)):
cosines = [cosines]
for a in cosines:
a = np.atleast_2d(a)
nr, nc = a.shape
assert nc == 3, error_message
if (nr > self.mxcos):
self.mxcos = nr
self.cosines = cosines'''
self.np = 0
self.parent.add_package(self)
def __init__(self, model, laytyp=0, layavg=0, chani=1.0, layvka=0, laywet=0, iupwcb = 53, hdry=-1E+30, iphdry = 0,\
hk=1.0, hani=1.0, vka=1.0, ss=1e-5, sy=0.15, vkcb=0.0, noparcheck=False, \
extension='upw', unitnumber = 31):
Package.__init__(self, model, extension, 'UPW', unitnumber) # Call ancestor's init to set self.parent, extension, name and unit number
self.heading = '# UPW for MODFLOW-NWT, generated by Flopy.'
self.url = 'upw_upstream_weighting_package.htm'
nrow, ncol, nlay, nper = self.parent.nrow_ncol_nlay_nper
# item 1
self.iupwcb = iupwcb # Unit number for file with cell-by-cell flow terms
self.hdry = hdry # Head in cells that are converted to dry during a simulation
self.npupw = 0 # number of UPW parameters
self.iphdry = iphdry
self.laytyp = util_2d(model,(nlay,),np.int,laytyp,name='laytyp')
self.layavg = util_2d(model,(nlay,),np.int,layavg,name='layavg')
self.chani = util_2d(model,(nlay,),np.int,chani,name='chani')
self.layvka = util_2d(model,(nlay,),np.int,layvka,name='vka')
self.laywet = util_2d(model,(nlay,),np.int,laywet,name='laywet')
self.options = ' '
if noparcheck: self.options = self.options + 'NOPARCHECK '
self.hk = util_3d(model,(nlay,nrow,ncol),np.float32,hk,name='hk',locat=self.unit_number[0])
self.hani = util_3d(model,(nlay,nrow,ncol),np.float32,hani,name='hani',locat=self.unit_number[0])
self.vka = util_3d(model,(nlay,nrow,ncol),np.float32,vka,name='vka',locat=self.unit_number[0])
self.ss = util_3d(model,(nlay,nrow,ncol),np.float32,ss,name='ss',locat=self.unit_number[0])
self.sy = util_3d(model,(nlay,nrow,ncol),np.float32,sy,name='sy',locat=self.unit_number[0])
self.vkcb = util_3d(model,(nlay,nrow,ncol),np.float32,vkcb,name='vkcb',locat=self.unit_number[0])
self.parent.add_package(self)
def __init__(self, model, os=2, temp=25, asbin=0, eps_aqu=0, eps_ph=0,
scr_output=1, cb_offset=0, smse=['pH', 'pe'], mine=[], ie=[],
surf=[], mobkin=[], minkin=[], surfkin=[], imobkin=[],
extension='phc'):
#Call ancestor's init to set self.parent, extension, name and
#unit number
Package.__init__(self, model, extension, 'PHC', 38)
self.os = os
self.temp = temp
self.asbin = asbin
self.eps_aqu = eps_aqu
self.eps_ph = eps_ph
self.scr_output = scr_output
self.cb_offset = cb_offset
self.smse = smse
self.nsmse = len(self.smse)
self.mine = mine
self.nmine = len(self.mine)
self.ie = ie
self.nie = len(self.ie)
self.surf = surf
self.nsurf = len(self.surf)
self.mobkin = mobkin
self.nmobkin = len(self.mobkin)
self.minkin = minkin[0]
self.nminkin = len(self.minkin)
self.minkin_parms = minkin[1]
self.surfkin = surfkin
self.nsurfkin = len(self.surfkin)
self.imobkin = imobkin
self.nimobkin = len(self.imobkin)
self.parent.add_package(self)
return
def __init__(self,
model,
ipakcb=0,
stress_period_data=None,
dtype=None,
extension='riv',
unitnumber=18,
options=None,
**kwargs):
"""
Package constructor.
"""
# Call parent init to set self.parent, extension, name and unit number
Package.__init__(self, model, extension, 'RIV', unitnumber)
self.heading = '# RIV for MODFLOW, generated by Flopy.'
self.url = 'riv.htm'
self.ipakcb = ipakcb
self.mxactr = 0
self.np = 0
if options is None:
options = []
self.options = options
if dtype is not None:
self.dtype = dtype
else:
self.dtype = self.get_default_dtype(
structured=self.parent.structured)
#self.stress_period_data = mflist(model, self.dtype, stress_period_data)
self.stress_period_data = mflist(self, stress_period_data)
self.parent.add_package(self)
def __init__(self, model, itrnsp=1, ibctcb=0, mcomp=1, ic_ibound_flg=1,
itvd=1, iadsorb=0, ict=0, cinact=-999., ciclose=1.e-6,
idisp=1, ixdisp=0, diffnc=0., izod=0, ifod=0, icbund=1,
porosity=0.1, bulkd=1., dlh=0., dlv=0., dth=0., dtv=0.,
sconc=0.,
extension='bct', unitnumber=35):
Package.__init__(self, model, extension, 'BCT', unitnumber)
self.url = 'bct.htm'
nrow, ncol, nlay, nper = self.parent.nrow_ncol_nlay_nper
self.itrnsp = itrnsp
self.ibctcb = ibctcb
self.mcomp = mcomp
self.ic_ibound_flg = ic_ibound_flg
self.itvd = itvd
self.iadsorb = iadsorb
self.ict = ict
self.cinact = cinact
self.ciclose = ciclose
self.idisp = idisp
self.ixdisp = ixdisp
self.diffnc = diffnc
self.izod = izod
self.ifod = ifod
self.icbund = util_3d(model, (nlay, nrow, ncol), np.float32, icbund,
'icbund',)
self.porosity = util_3d(model, (nlay, nrow, ncol), np.float32,
porosity, 'porosity')
self.dlh = util_3d(model, (nlay, nrow, ncol), np.float32, dlh, 'dlh')
self.dlv = util_3d(model, (nlay, nrow, ncol), np.float32, dlv, 'dlv')
self.dth = util_3d(model, (nlay, nrow, ncol), np.float32, dth, 'dth')
self.dtv = util_3d(model, (nlay, nrow, ncol), np.float32, dth, 'dtv')
self.sconc = util_3d(model, (nlay, nrow, ncol), np.float32, sconc,
'sconc',)
self.parent.add_package(self)
return
def __init__(self, model, ipakcb=0, stress_period_data=None, dtype=None,
no_print=False, options=None, extension='ghb', unitnumber=23):
"""
Package constructor.
"""
Package.__init__(self, model, extension, 'GHB',
unitnumber)
self.heading = '# GHB for MODFLOW, generated by Flopy.'
self.url = 'ghb.htm'
if ipakcb != 0:
self.ipakcb = 53
else:
self.ipakcb = 0 # 0: no cell by cell terms are written
self.no_print = no_print
self.np = 0
if options is None:
options = []
if self.no_print:
options.append('NOPRINT')
self.options = options
self.parent.add_package(self)
if dtype is not None:
self.dtype = dtype
else:
self.dtype = self.get_default_dtype(structured=self.parent.structured)
self.stress_period_data = MfList(self, stress_period_data)
def __init__(self, model, ighbcb=0, layer_row_column_data=None,
layer_row_column_head_cond=None,
no_print=False, options=None, naux=0,
extension='ghb', unitnumber=23):
Package.__init__(self, model, extension, 'GHB',
unitnumber) # Call ancestor's init to set self.parent, extension, name and unit number
self.heading = '# GHB for MODFLOW, generated by Flopy.'
self.url = 'ghb.htm'
self.ighbcb = ighbcb # no cell by cell terms are written
if layer_row_column_data is None:
if layer_row_column_head_cond is not None:
print '\nWARNING: ModflowGhb - Do not use layer_row_column_head_cond!\n'+\
' Use layer_row_column_data instead.'
layer_row_column_data = layer_row_column_head_cond
else:
raise Exception('Failed to specify layer_row_column_head_cond or layer_row_column_data.')
self.mxactb, self.layer_row_column_data = self.assign_layer_row_column_data(layer_row_column_data,
5 + naux)
self.no_print = no_print
self.np = 0
if options is None:
options = []
if self.no_print:
options.append('NOPRINT')
self.options = options
self.parent.add_package(self)
def __init__(self,
model,
ipakcb=0,
stress_period_data=None,
dtype=None,
extension='drn',
unitnumber=21,
options=None,
**kwargs):
"""
Package constructor
"""
Package.__init__(
self, model, extension, 'DRN', unitnumber
) # Call ancestor's init to set self.parent, extension, name and unit number
self.heading = '# DRN for MODFLOW, generated by Flopy.'
self.url = 'drn.htm'
self.ipakcb = ipakcb # 0: no cell by cell terms are written
self.np = 0
if options is None:
options = []
self.options = options
if dtype is not None:
self.dtype = dtype
else:
self.dtype = self.get_default_dtype()
self.stress_period_data = mflist(model, self.dtype, stress_period_data)
self.parent.add_package(self)
def __init__(self, model, extension='list', listunit=7):
#Call ancestor's init to set self.parent, extension, name and
#unit number
Package.__init__(self, model, extension, 'LIST', listunit)
#self.parent.add_package(self) This package is not added to the base
#model so that it is not included in get_name_file_entries()
return
def __init__(self, model, mxiter=50, iiter=30, iadamp=0, hclose=1e-5, rclose=1e-5, relax=1.0, ioutgmg=0, iunitmhc=0,
ism=0, isc=0, damp=1.0, dup=0.75, dlow=0.01, chglimit=1.0, extension='gmg', unitnumber=27):
"""
Package constructor.
"""
Package.__init__(self, model, extension, 'GMG',
unitnumber) # Call ancestor's init to set self.parent, extension, name and unit number
self.heading = '# GMG for MODFLOW, generated by Flopy.'
self.url = 'gmg.htm'
self.mxiter = mxiter
self.iiter = iiter
self.iadamp = iadamp
self.hclose = hclose
self.rclose = rclose
self.relax = relax
self.ism = ism
self.isc = isc
self.dup = dup
self.dlow = dlow
self.chglimit = chglimit
self.damp = damp
self.ioutgmg = ioutgmg
self.iunitmhc = iunitmhc
self.parent.add_package(self)
def __init__(self, model, ipakcb=0, stress_period_data=None, dtype=None,
extension='wel', unitnumber=20, options=None):
"""
Package constructor.
"""
# Call parent init to set self.parent, extension, name and unit number
Package.__init__(self, model, extension, 'WEL', unitnumber)
self.heading = '# Well file for MODFLOW, generated by Flopy.'
self.url = 'wel.htm'
self.ipakcb = ipakcb # no cell by cell terms are written
self.np = 0
if options is None:
options = []
self.specify = False
for idx, opt in enumerate(options):
if 'specify' in opt:
t = opt.strip().split()
self.specify = True
self.phiramp = np.float(t[1])
self.phiramp_unit = np.int(t[2])
options.pop(idx)
break
self.options = options
self.parent.add_package(self)
if dtype is not None:
self.dtype = dtype
else:
self.dtype = self.get_default_dtype(structured=self.parent.structured)
self.stress_period_data = mflist(model, self.dtype, stress_period_data)
def __init__(self, model, ipakcb=0, stress_period_data=None, dtype=None,
extension='riv', unitnumber=18, options=None, **kwargs):
"""
Package constructor.
"""
# Call parent init to set self.parent, extension, name and unit number
Package.__init__(self, model, extension, 'RIV', unitnumber)
self.heading = '# RIV for MODFLOW, generated by Flopy.'
self.url = 'riv.htm'
if ipakcb != 0:
self.ipakcb = 53
else:
self.ipakcb = 0 # 0: no cell by cell terms are written
self.mxactr = 0
self.np = 0
if options is None:
options = []
self.options = options
if dtype is not None:
self.dtype = dtype
else:
self.dtype = self.get_default_dtype(structured=self.parent.structured)
# self.stress_period_data = MfList(model, self.dtype, stress_period_data)
self.stress_period_data = MfList(self, stress_period_data)
self.parent.add_package(self)
def __init__(self, model, mtdnconc=1, mfnadvfd=1, nswtcpl=1, iwtable=1,
densemin=1.000, densemax=1.025,
dnscrit=1e-2,
denseref=1.000, denseslp=.025,
firstdt=0.001,
indense=0,
dense=1.000, extension='vdf'):
# Call ancestor's init to set self.parent, extension, name and
#unit number
Package.__init__(self, model, extension, 'VDF', 37)
nrow, ncol, nlay, nper = self.parent.mf.nrow_ncol_nlay_nper
self.mtdnconc = mtdnconc
self.mfnadvfd = mfnadvfd
self.nswtcpl = nswtcpl
self.iwtable = iwtable
self.densemin = densemin
self.densemax = densemax
self.dnscrit = dnscrit
self.denseref = denseref
self.denseslp = denseslp
self.firstdt = firstdt
self.indense = indense
#self.dense = self.assignarray((nlay,nrow,ncol), np.float, dense,
# name='dense',)
self.dense = util_3d(model,(nlay,nrow,ncol),np.float32,dense,name='dense')
self.parent.add_package(self)
return
def __init__(self, model, laytyp=0, layavg=0, chani=1.0, layvka=0,
laywet=0, ipakcb=53, hdry=-1E+30, iwdflg=0, wetfct=0.1,
iwetit=1, ihdwet=0, hk=1.0, hani=1.0, vka=1.0, ss=1e-5,
sy=0.15, vkcb=0.0, wetdry=-0.01, storagecoefficient=False,
constantcv=False, thickstrt=False, nocvcorrection=False,
novfc=False, extension='lpf', unitnumber=15):
Package.__init__(self, model, extension, 'LPF',
unitnumber) # Call ancestor's init to set self.parent, extension, name and unit number
self.heading = '# LPF for MODFLOW, generated by Flopy.'
self.url = 'lpf.htm'
nrow, ncol, nlay, nper = self.parent.nrow_ncol_nlay_nper
# item 1
if ipakcb != 0:
self.ipakcb = 53
else:
self.ipakcb = 0 # 0: no cell by cell terms are written
self.hdry = hdry # Head in cells that are converted to dry during a simulation
self.nplpf = 0 # number of LPF parameters
self.laytyp = Util2d(model, (nlay,), np.int, laytyp, name='laytyp')
self.layavg = Util2d(model, (nlay,), np.int, layavg, name='layavg')
self.chani = Util2d(model, (nlay,), np.float32, chani, name='chani')
self.layvka = Util2d(model, (nlay,), np.int, layvka, name='layvka')
self.laywet = Util2d(model, (nlay,), np.int, laywet, name='laywet')
self.wetfct = wetfct # Factor that is included in the calculation of the head when a cell is converted from dry to wet
self.iwetit = iwetit # Iteration interval for attempting to wet cells
self.ihdwet = ihdwet # Flag that determines which equation is used to define the initial head at cells that become wet
self.options = ' '
if storagecoefficient:
self.options = self.options + 'STORAGECOEFFICIENT '
if constantcv: self.options = self.options + 'CONSTANTCV '
if thickstrt: self.options = self.options + 'THICKSTRT '
if nocvcorrection: self.options = self.options + 'NOCVCORRECTION '
if novfc: self.options = self.options + 'NOVFC '
self.hk = Util3d(model, (nlay, nrow, ncol), np.float32, hk, name='hk',
locat=self.unit_number[0])
self.hani = Util3d(model, (nlay, nrow, ncol), np.float32, hani,
name='hani', locat=self.unit_number[0])
keys = []
for k in range(nlay):
key = 'vka'
if self.layvka[k] != 0:
key = 'vani'
keys.append(key)
self.vka = Util3d(model, (nlay, nrow, ncol), np.float32, vka,
name=keys, locat=self.unit_number[0])
tag = 'ss'
if storagecoefficient:
tag = 'storage'
self.ss = Util3d(model, (nlay, nrow, ncol), np.float32, ss, name=tag,
locat=self.unit_number[0])
self.sy = Util3d(model, (nlay, nrow, ncol), np.float32, sy, name='sy',
locat=self.unit_number[0])
self.vkcb = Util3d(model, (nlay, nrow, ncol), np.float32, vkcb,
name='vkcb', locat=self.unit_number[0])
self.wetdry = Util3d(model, (nlay, nrow, ncol), np.float32, wetdry,
name='wetdry', locat=self.unit_number[0])
self.parent.add_package(self)
return
def __init__(
self,
model,
itrnsp=1,
ibctcb=0,
mcomp=1,
ic_ibound_flg=1,
itvd=1,
iadsorb=0,
ict=0,
cinact=-999.0,
ciclose=1.0e-6,
idisp=1,
ixdisp=0,
diffnc=0.0,
izod=0,
ifod=0,
icbund=1,
porosity=0.1,
bulkd=1.0,
arad=0.0,
dlh=0.0,
dlv=0.0,
dth=0.0,
dtv=0.0,
sconc=0.0,
extension="bct",
unitnumber=35,
):
Package.__init__(self, model, extension, "BCT", unitnumber)
self.url = "bct.htm"
nrow, ncol, nlay, nper = self.parent.nrow_ncol_nlay_nper
self.itrnsp = itrnsp
self.ibctcb = ibctcb
self.mcomp = mcomp
self.ic_ibound_flg = ic_ibound_flg
self.itvd = itvd
self.iadsorb = iadsorb
self.ict = ict
self.cinact = cinact
self.ciclose = ciclose
self.idisp = idisp
self.ixdisp = ixdisp
self.diffnc = diffnc
self.izod = izod
self.ifod = ifod
self.icbund = util_3d(model, (nlay, nrow, ncol), np.float32, icbund, "icbund")
self.porosity = util_3d(model, (nlay, nrow, ncol), np.float32, porosity, "porosity")
# self.arad = util_2d(model, (1, nja), np.float32,
# arad, 'arad')
self.dlh = util_3d(model, (nlay, nrow, ncol), np.float32, dlh, "dlh")
self.dlv = util_3d(model, (nlay, nrow, ncol), np.float32, dlv, "dlv")
self.dth = util_3d(model, (nlay, nrow, ncol), np.float32, dth, "dth")
self.dtv = util_3d(model, (nlay, nrow, ncol), np.float32, dth, "dtv")
self.sconc = util_3d(model, (nlay, nrow, ncol), np.float32, sconc, "sconc")
self.parent.add_package(self)
return
def __init__(self, model, output_file_name='mt3d_link.ftl', output_file_unit=54, output_file_header='extended', output_file_format='unformatted', extension ='lmt6', unitnumber=30):
Package.__init__(self, model, extension, 'LMT6', unitnumber) # Call ancestor's init to set self.parent, extension, name and unit number
self.heading = '# Lmt input file for MODFLOW, generated by Flopy.'
self.url = 'lmt.htm'
self.output_file_name='mt3d_link.ftl'
self.output_file_unit=54
self.output_file_header='extended'
self.output_file_format='unformatted'
self.parent.add_package(self)
def __init__(self, model, mxiter=200, \
accl=1, hclose=1e-5, iprsor=0, extension='sor', unitnumber=26):
Package.__init__(self, model, extension, 'sor', unitnumber) # Call ancestor's init to set self.parent, extension, name and unit number
self.url = 'sor.htm'
self.mxiter = mxiter
self.accl= accl
self.hclose = hclose
self.iprsor = iprsor
self.parent.add_package(self)
def __init__(self, model, nlay=1, nrow=2, ncol=2, nper=1, delr=1.0,
delc=1.0, laycbd=0, top=1, botm=0, perlen=1, nstp=1,
tsmult=1, steady=True, itmuni=4, lenuni=2, extension='dis',
unitnumber=11, xul=None, yul=None, rotation=0.0,
start_datetime="1/1/1970"):
# Call ancestor's init to set self.parent, extension, name and unit
# number
Package.__init__(self, model, extension, 'DIS', unitnumber)
self.url = 'dis.htm'
self.nrow = nrow
self.ncol = ncol
self.nlay = nlay
self.nper = nper
# Set values of all parameters
self.heading = '# Discretization file for MODFLOW, generated by Flopy.'
self.laycbd = Util2d(model, (self.nlay,), np.int, laycbd,
name='laycbd')
self.laycbd[-1] = 0 # bottom layer must be zero
self.delr = Util2d(model, (self.ncol,), np.float32, delr, name='delr',
locat=self.unit_number[0])
self.delc = Util2d(model, (self.nrow,), np.float32, delc, name='delc',
locat=self.unit_number[0])
self.top = Util2d(model, (self.nrow, self.ncol), np.float32,
top, name='model_top', locat=self.unit_number[0])
self.botm = Util3d(model, (self.nlay + sum(self.laycbd),
self.nrow, self.ncol), np.float32, botm,
'botm', locat=self.unit_number[0])
self.perlen = Util2d(model, (self.nper,), np.float32, perlen,
name='perlen')
self.nstp = Util2d(model, (self.nper,), np.int, nstp, name='nstp')
self.tsmult = Util2d(model, (self.nper,), np.float32, tsmult,
name='tsmult')
self.steady = Util2d(model, (self.nper,), np.bool,
steady, name='steady')
try:
self.itmuni = int(itmuni)
except:
self.itmuni = ITMUNI[itmuni.lower()[0]]
try:
self.lenuni = int(lenuni)
except:
self.lenuni = LENUNI[lenuni.lower()[0]]
self.parent.add_package(self)
self.itmuni_dict = {0: "undefined", 1: "seconds", 2: "minutes",
3: "hours", 4: "days", 5: "years"}
self.sr = reference.SpatialReference(self.delr.array, self.delc.array, self.lenuni, xul=xul,
yul=yul, rotation=rotation)
self.start_datetime = start_datetime
# calculate layer thicknesses
self.__calculate_thickness()
def __init__(self, model, iter_mo=50, iter_mi=30, close_h=1e-5, close_r=1e-5, \
relax=1.0, ifill=0, unit_pc=0, unit_ts=0, \
adamp=0, damp=1.0, damp_lb=0.001, rate_d=0.1, chglimit=0., \
acnvg=0, cnvg_lb=0.001, mcnvg=2, rate_c=-1.0, ipunit=0, \
extension=['pcgn'], unit_number=27):
"""
Package constructor.
"""
name = ['PCGN']
units = [unit_number]
extra = ['']
tu = (unit_pc, unit_ts, ipunit)
ea = ('pcgni', 'pcgnt', 'pcgno')
for [t, e] in zip(tu, ea):
if t > 0:
extension.append(e)
name.append('DATA')
units.append(t)
extra.append('REPLACE')
Package.__init__(
self,
model,
extension=extension,
name=name,
unit_number=units,
extra=extra
) # Call ancestor's init to set self.parent, extension, name and unit number
self.heading = '# PCGN for MODFLOW, generated by Flopy.'
self.url = 'pcgn.htm'
self.iter_mo = iter_mo
self.iter_mi = iter_mi
self.close_h = close_h
self.close_r = close_r
self.relax = relax
self.ifill = ifill
self.unit_pc = unit_pc
self.unit_ts = unit_ts
self.adamp = adamp
self.damp = damp
self.damp_lb = damp_lb
self.rate_d = rate_d
self.chglimit = chglimit
self.acnvg = acnvg
self.cnvg_lb = cnvg_lb
self.mcnvg = mcnvg
self.rate_c = rate_c
self.ipunit = ipunit
# error trapping
if self.ifill < 0 or self.ifill > 1:
raise TypeError(
'PCGN: ifill must be 0 or 1 - an ifill value of {0} was specified'
.format(self.ifill))
# add package
self.parent.add_package(self)
def __init__(self, model, al=0.01, trpt=0.1, trpv=0.01, dmcoef=1e-9,
extension='dsp', multiDiff=False,**kwargs):
'''
if dmcoef is passed as a list of (nlay, nrow, ncol) arrays,
then the multicomponent diffusion is activated
'''
# Call ancestor's init to set self.parent, extension, name and
#unit number
Package.__init__(self, model, extension, 'DSP', 33)
nrow, ncol, nlay, nper = self.parent.mf.nrow_ncol_nlay_nper
ncomp = self.parent.get_ncomp()
# if multiDiff:
# assert isinstance(dmcoef,list),('using multicomponent diffusion '
# 'requires dmcoef is list of '
# 'length ncomp')
# if len(dmcoef) != ncomp:
# raise TypeError,('using multicomponent diffusion requires '
# 'dmcoef is list of length ncomp')
self.multiDiff = multiDiff
#self.al = self.assignarray((nlay, nrow, ncol), np.float, al,
# name='al', load=model.load )
self.al = util_3d(model,(nlay,nrow,ncol),np.float32,al,name='al',
locat=self.unit_number[0])
#self.trpt = self.assignarray((nlay,), np.float, trpt, name='trpt',
# load=model.load)
self.trpt = util_2d(model,(nlay,),np.float32,trpt,name='trpt',
locat=self.unit_number[0])
#self.trpv = self.assignarray((nlay,), np.float, trpv, name='trpv',
# load=model.load)
self.trpv = util_2d(model,(nlay,),np.float32,trpt,name='trpv',
locat=self.unit_number[0])
self.dmcoef = []
a = util_3d(model, (nlay, nrow, ncol), np.float32, dmcoef,
name='dmcoef1', locat=self.unit_number[0])
self.dmcoef.append(a)
if self.multiDiff:
for icomp in range(2, ncomp+1):
name = "dmcoef" + str(icomp)
val = 0.0
if name in list(kwargs.keys()):
val = kwargs[name]
kwargs.pop(name)
else:
print("DSP: setting dmcoef for component " +\
str(icomp) + " to zero, kwarg name " +\
name)
a = util_3d(model, (nlay, nrow, ncol), np.float32, val,
name=name, locat=self.unit_number[0])
self.dmcoef.append(a)
if len(list(kwargs.keys())) > 0:
raise Exception("DSP error: unrecognized kwargs: " +
' '.join(list(kwargs.keys())))
self.parent.add_package(self)
return
def __init__(self, model, extension='swr', unitnumber=36):
"""
Package constructor.
"""
Package.__init__(self, model, extension, 'SWR',
unitnumber) # Call ancestor's init to set self.parent, extension, name and unit number
self.heading = '# SWR1 process for MODFLOW, generated by Flopy.'
self.url = 'swr1.htm'
self.parent.add_package(self)
def __init__(self, model, mxiter=200, nparm=5, \
accl=1, hclose=1e-5, ipcalc=1, wseed=0, iprsip=0, extension='sip', unitnumber=25):
Package.__init__(self, model, extension, 'SIP', unitnumber) # Call ancestor's init to set self.parent, extension, name and unit number
self.url = 'sip.htm'
self.mxiter = mxiter
self.nparm = nparm
self.accl = accl
self.hclose = hclose
self.ipcalc = ipcalc
self.wseed = wseed
self.iprsip = iprsip
self.parent.add_package(self)
def __init__(self, model, outnam='tob_output', CScale=1.0, FluxGroups=[],
FScale=1.0, iOutFlux=0, extension='tob'):
#Call ancestor's init to set self.parent, extension, name and
#unit number
Package.__init__(self, model, extension, 'TOB', 37)
self.heading = '# TOB for MT3DMS, generated by Flopy.'
self.outnam = outnam
self.CScale = CScale
self.FluxGroups = FluxGroups
self.FScale = FScale
self.iOutFlux = iOutFlux
self.parent.add_package(self)
return
def __init__(self, model, headtol = 1E-4, fluxtol = 500, maxiterout = 100, \
thickfact = 1E-5, linmeth = 1, iprnwt = 0, ibotav = 0, \
options = 'COMPLEX', Continue=False, \
dbtheta=0.4, dbkappa=1.e-5, dbgamma=0., momfact=0.1, \
backflg=1, maxbackiter=50, backtol=1.1, backreduce=0.70, \
maxitinner=50, ilumethod=2, levfill=5, stoptol=1.e-10, msdr=15, \
iacl=2, norder=1, level=5, north=7, iredsys=0, rrctols=0.0, \
idroptol=1, epsrn=1.e-4, hclosexmd=1e-4, mxiterxmd=50, \
extension='nwt', unitnumber = 32):
Package.__init__(
self, model, extension, 'NWT', unitnumber
) # Call ancestor's init to set self.parent, extension, name and unit number
self.heading = '# NWT for MODFLOW-NWT, generated by Flopy.'
self.url = 'nwt_newton_solver.htm'
self.headtol = headtol
self.fluxtol = fluxtol
self.maxiterout = maxiterout
self.thickfact = thickfact
self.linmeth = linmeth
self.iprnwt = iprnwt
self.ibotav = ibotav
if isinstance(options, list):
self.options = options
else:
self.options = [options.upper()]
if Continue:
self.options.append('CONTINUE')
self.dbtheta = dbtheta
self.dbkappa = dbkappa
self.dbgamma = dbgamma
self.momfact = momfact
self.backflg = backflg
self.maxbackiter = maxbackiter
self.backtol = backtol
self.backreduce = backreduce
self.maxitinner = maxitinner
self.ilumethod = ilumethod
self.levfill = levfill
self.stoptol = stoptol
self.msdr = msdr
self.iacl = iacl
self.norder = norder
self.level = level
self.north = north
self.iredsys = iredsys
self.rrctols = rrctols
self.idroptol = idroptol
self.epsrn = epsrn
self.hclosexmd = hclosexmd
self.mxiterxmd = mxiterxmd
self.parent.add_package(self)
def __init__(
self,
model,
nphfb=0,
mxfb=0,
nhfbnp=0,
hfb_data=None,
nacthfb=0,
no_print=False,
options=None,
extension="hfb",
unitnumber=17,
):
Package.__init__(
self, model, extension, "HFB6", unitnumber
) # Call ancestor's init to set self.parent, extension, name and unit number
self.heading = "# HFB for MODFLOW, generated by Flopy."
self.url = "hfb6.htm"
self.nphfb = nphfb
self.mxfb = mxfb
self.nacthfb = nacthfb
self.no_print = no_print
self.np = 0
if options is None:
options = []
if self.no_print:
options.append("NOPRINT")
self.options = options
aux_names = []
it = 0
while it < len(options):
print(it, options[it])
if "aux" in options[it].lower():
aux_names.append(options[it + 1].lower())
it += 1
it += 1
if hfb_data is None:
raise Exception("Failed to specify hfb_data.")
self.nhfbnp = len(hfb_data)
self.hfb_data = ModflowHfb.get_empty(self.nhfbnp)
for ibnd, t in enumerate(hfb_data):
self.hfb_data[ibnd] = tuple(t)
self.parent.add_package(self)
def __init__(
self,
model,
al=0.01,
trpt=0.1,
trpv=0.01,
dmcoef=1e-9,
extension="dsp",
multiDiff=False,
unitnumber=None,
**kwargs
):
if unitnumber is None:
unitnumber = self.unitnumber
Package.__init__(self, model, extension, "DSP", unitnumber)
nrow = model.nrow
ncol = model.ncol
nlay = model.nlay
ncomp = model.ncomp
mcomp = model.mcomp
self.multiDiff = multiDiff
self.al = Util3d(model, (nlay, nrow, ncol), np.float32, al, name="al", locat=self.unit_number[0])
self.trpt = Util2d(model, (nlay,), np.float32, trpt, name="trpt", locat=self.unit_number[0])
self.trpv = Util2d(model, (nlay,), np.float32, trpv, name="trpv", locat=self.unit_number[0])
# Multi-species and multi-diffusion, hence the complexity
self.dmcoef = []
shape = (nlay, 1)
utype = Util2d
nmcomp = ncomp
if multiDiff:
shape = (nlay, nrow, ncol)
utype = Util3d
nmcomp = mcomp
u2or3 = utype(model, shape, np.float32, dmcoef, name="dmcoef1", locat=self.unit_number[0])
self.dmcoef.append(u2or3)
for icomp in range(2, nmcomp + 1):
name = "dmcoef" + str(icomp)
val = 0.0
if name in list(kwargs.keys()):
val = kwargs.pop(name)
else:
print("DSP: setting dmcoef for component " + str(icomp) + " to zero, kwarg name " + name)
u2or3 = utype(model, shape, np.float32, val, name=name, locat=self.unit_number[0])
self.dmcoef.append(u2or3)
if len(list(kwargs.keys())) > 0:
raise Exception("DSP error: unrecognized kwargs: " + " ".join(list(kwargs.keys())))
self.parent.add_package(self)
return
def __init__(self,
model,
mxmnw=0,
iwl2cb=0,
iwelpt=0,
nomoiter=0,
kspref=1,
wel1_bynode_qsum=None,
itmp=0,
lay_row_col_qdes_mn_multi=None,
mnwname=None,
extension='mnw1',
unitnumber=33):
Package.__init__(
self, model, extension, 'MNW1', unitnumber
) # Call ancestor's init to set self.parent, extension, name, and unit number
self.url = 'mnw1.htm'
self.nper = self.parent.nrow_ncol_nlay_nper[-1]
self.heading = '# Multi-node well 1 (MNW1) file for MODFLOW, generated by Flopy'
self.mxmnw = mxmnw #-maximum number of multi-node wells to be simulated
self.iwl2cb = iwl2cb #-flag and unit number
self.iwelpt = iwelpt #-verbosity flag
self.nomoiter = nomoiter #-integer indicating the number of iterations for which flow in MNW wells is calculated
self.kspref = kspref #-alphanumeric key indicating which set of water levels are to be used as reference values for calculating drawdown
self.losstype = 'SKIN' #-string indicating head loss type for each well
self.wel1_bynode_qsum = wel1_bynode_qsum #-nested list containing file names, unit numbers, and ALLTIME flag for auxilary output, e.g. [['test.ByNode',92,'ALLTIME']]
self.itmp = itmp #-array containing # of wells to be simulated for each stress period (shape = (NPER))
self.lay_row_col_qdes_mn_multi = lay_row_col_qdes_mn_multi #-list of arrays containing lay, row, col, qdes, and MN or MULTI flag for all well nodes (length = NPER)
self.mnwname = mnwname #-string prefix name of file for outputting time series data from MNW1
#-create empty arrays of the correct size
self.itmp = zeros(self.nper, dtype='int32')
#-assign values to arrays
self.assignarray_old(self.itmp, itmp)
#-input format checks:
lossTypes = ['SKIN', 'LINEAR']
assert self.losstype in lossTypes, 'LOSSTYPE (%s) must be one of the following: "%s" or "%s"' % (
self.losstype, lossTypes[0], lossTypes[1])
auxFileExtensions = ['wl1', 'ByNode', 'Qsum']
for each in self.wel1_bynode_qsum:
assert each[0].split(
'.'
)[1] in auxFileExtensions, 'File extensions in "wel1_bynode_qsum" must be one of the following: ".wl1", ".ByNode", or ".Qsum".'
assert self.itmp.max(
) <= self.mxmnw, 'ITMP cannot exceed maximum number of wells to be simulated.'
self.parent.add_package(self)
def __init__(self, model, mxiter=200, \
accl=1, hclose=1e-5, iprsor=0, extension='sor', unitnumber=26):
"""
Package constructor.
"""
Package.__init__(
self, model, extension, 'sor', unitnumber
) # Call ancestor's init to set self.parent, extension, name and unit number
self.url = 'sor.htm'
self.mxiter = mxiter
self.accl = accl
self.hclose = hclose
self.iprsor = iprsor
self.parent.add_package(self)
def __init__(self, model, pval_dict=None,
extension ='pval', unitnumber=1005):
"""
Package constructor.
"""
Package.__init__(self, model, extension, 'PVAL', unitnumber) # Call ancestor's init to set self.parent, extension, name and unit number
self.heading = '# PVAL for MODFLOW, generated by Flopy.\n# Really...is this actually helpful?'
self.url = 'pval.htm'
self.npval = 0
if pval_dict is not None:
self.pval = len(pval_dict)
self.pval_dict = pval_dict
self.parent.add_package(self)
def __init__(self,
model,
nphfb=0,
mxfb=0,
nhfbnp=0,
hfb_data=None,
nacthfb=0,
no_print=False,
options=None,
extension='hfb',
unitnumber=17):
Package.__init__(
self, model, extension, 'HFB6', unitnumber
) # Call ancestor's init to set self.parent, extension, name and unit number
self.heading = '# HFB for MODFLOW, generated by Flopy.'
self.url = 'hfb6.htm'
self.nphfb = nphfb
self.mxfb = mxfb
self.nacthfb = nacthfb
self.no_print = no_print
self.np = 0
if options is None:
options = []
if self.no_print:
options.append('NOPRINT')
self.options = options
aux_names = []
it = 0
while it < len(options):
print(it, options[it])
if 'aux' in options[it].lower():
aux_names.append(options[it + 1].lower())
it += 1
it += 1
if hfb_data is None:
raise Exception('Failed to specify hfb_data.')
self.nhfbnp = len(hfb_data)
self.hfb_data = ModflowHfb.get_empty(self.nhfbnp)
for ibnd, t in enumerate(hfb_data):
self.hfb_data[ibnd] = tuple(t)
self.parent.add_package(self)
def __init__(self, model, mxiter=200, nparm=5, \
accl=1, hclose=1e-5, ipcalc=1, wseed=0, iprsip=0, extension='sip', unitnumber=25):
"""
Package constructor.
"""
Package.__init__(self, model, extension, 'SIP', unitnumber) # Call ancestor's init to set self.parent, extension, name and unit number
self.url = 'sip.htm'
self.mxiter = mxiter
self.nparm = nparm
self.accl = accl
self.hclose = hclose
self.ipcalc = ipcalc
self.wseed = wseed
self.iprsip = iprsip
self.parent.add_package(self)
def __init__(self, model, zone_dict=None,
extension='zon', unitnumber=1001):
"""
Package constructor.
"""
Package.__init__(self, model, extension, 'ZONE',
unitnumber) # Call ancestor's init to set self.parent, extension, name and unit number
self.heading = '# ZONE for MODFLOW, generated by Flopy.'
self.url = 'zon.htm'
self.nzn = 0
if zone_dict is not None:
self.nzn = len(zone_dict)
self.zone_dict = zone_dict
self.parent.add_package(self)
def __init__(self, model, mult_dict=None,
extension='mlt', unitnumber=1002):
"""
Package constructor.
"""
Package.__init__(self, model, extension, 'MULT', unitnumber) # Call ancestor's init to set self.parent, extension, name and unit number
self.heading = '# MULT for MODFLOW, generated by Flopy.'
self.url = 'zon.htm'
self.nml = 0
if mult_dict is not None:
self.nml = len(mult_dict)
self.mult_dict = mult_dict
#print mult_dict
self.parent.add_package(self)
def __init__(self,
model,
output_file_name='mt3d_link.ftl',
output_file_unit=54,
output_file_header='extended',
output_file_format='unformatted',
extension='lmt6',
unitnumber=30):
# Call ancestor's init to set self.parent, extension, name and unit number
Package.__init__(self, model, extension, 'LMT6', unitnumber)
self.heading = '# Lmt input file for MODFLOW, generated by Flopy.'
self.url = 'lmt.htm'
self.output_file_name = output_file_name
self.output_file_unit = output_file_unit
self.output_file_header = output_file_header
self.output_file_format = output_file_format
self.parent.add_package(self)
def __init__(self, model, mxiter=100, innerit=50, \
isolver=1, npc=2, iscl=0, iord=0, ncoresm=1, ncoresv=1, \
damp=1.0, dampt=1.0, relax=0.97, \
ifill=0, droptol=0.0, \
hclose=1e-3, rclose=1e-1, l2norm=None, \
iprpks=0, mutpks=3,
mpi=False, partopt=0, novlapimpsol=1, stenimpsol=2, verbose=0, partdata=None, \
extension='pks', unitnumber=27):
"""
Package constructor.
"""
Package.__init__(
self, model, extension, 'PKS', unitnumber
) # Call ancestor's init to set self.parent, extension, name and unit number
self.heading = '# PKS for MODFLOW, generated by Flopy.'
self.url = 'pks.htm'
self.mxiter = mxiter
self.innerit = innerit
self.isolver = isolver
self.npc = npc
self.iscl = iscl
self.iord = iord
self.ncoresm = ncoresm
self.ncoresv = ncoresv
self.damp = damp
self.dampt = dampt
self.relax = relax
self.ifill = ifill
self.droptol = droptol
self.hclose = hclose
self.rclose = rclose
self.l2norm = l2norm
self.iprpks = iprpks
self.mutpks = mutpks
# MPI
self.mpi = mpi
self.partopt = partopt
self.novlapimpsol = novlapimpsol
self.stenimpsol = stenimpsol
self.verbose = verbose
self.partdata = partdata
self.parent.add_package(self)
def __init__(self,
model,
outnam='tob_output',
CScale=1.0,
FluxGroups=[],
FScale=1.0,
iOutFlux=0,
extension='tob'):
#Call ancestor's init to set self.parent, extension, name and
#unit number
Package.__init__(self, model, extension, 'TOB', 37)
self.heading = '# TOB for MT3DMS, generated by Flopy.'
self.outnam = outnam
self.CScale = CScale
self.FluxGroups = FluxGroups
self.FScale = FScale
self.iOutFlux = iOutFlux
self.parent.add_package(self)
return
def __init__(self, model, isothm=0, ireact=0, igetsc=1, rhob=1.8e3,
prsity2=0.1, srconc=0.0, sp1=0.0, sp2=0.0, rc1=0.0, rc2=0.0,
extension='rct'):
#Call ancestor's init to set self.parent, extension, name and
#unit number
Package.__init__(self, model, extension, 'RCT', 36)
nrow, ncol, nlay, nper = self.parent.mf.nrow_ncol_nlay_nper
self.heading1 = '# RCT for MT3DMS, generated by Flopy.'
self.isothm = isothm
self.ireact = ireact
self.irctop = 2 #All RCT vars are specified as 3D arrays
self.igetsc = igetsc
# Set values of all parameters
#self.rhob = self.assignarray((nlay, nrow, ncol), np.float, rhob,
# name='rhob')
self.rhob = util_3d(model,(nlay,nrow,ncol),np.float32,rhob,name='rhob',
locat=self.unit_number[0])
#self.prsity2 = self.assignarray((nlay, nrow, ncol), np.float, prsity2,
# name='prsity2')
self.prsity2 = util_3d(model,(nlay,nrow,ncol),np.float32,prsity2,
name='prsity2',locat=self.unit_number[0])
#self.srconc = self.assignarray((nlay, nrow, ncol), np.float, srconc,
# name='srconc')
self.srconc = util_3d(model,(nlay,nrow,ncol),np.float32,srconc,
name='srconc',locat=self.unit_number[0])
#self.sp1 = self.assignarray((nlay, nrow, ncol), np.float, sp1,
# name='sp1')
self.sp1 = util_3d(model,(nlay,nrow,ncol),np.float32,sp1,name='sp1',
locat=self.unit_number[0])
#self.sp2 = self.assignarray((nlay, nrow, ncol), np.float, sp2,
# name='sp2')
self.sp2 = util_3d(model,(nlay,nrow,ncol),np.float32,sp2,name='sp2',
locat=self.unit_number[0])
#self.rc1 = self.assignarray((nlay, nrow, ncol), np.float, rc1,
# name='rc1')
self.rc1 = util_3d(model,(nlay,nrow,ncol),np.float32,rc1,name='rc1',
locat=self.unit_number[0])
#self.rc2 = self.assignarray((nlay, nrow, ncol), np.float, rc2,
# name='rc2')
self.rc2 = util_3d(model,(nlay,nrow,ncol),np.float32,rc2,name='rc2',
locat=self.unit_number[0])
self.parent.add_package(self)
return
def __init__(self,
model,
layer_row_column_data=None,
layer_row_column_shead_ehead=None,
cosines=None,
extension='pbc',
unitnumber=30,
zerobase=True):
Package.__init__(
self, model, extension, 'PBC', unitnumber
) # Call ancestor's init to set self.parent, extension, name and unit number
self.heading = '# PBC for MODFLOW, generated by Flopy.'
self.mxactp = 0
if layer_row_column_data is None:
if layer_row_column_shead_ehead is not None:
print('\nWARNING: ModflowPbc - Do not use layer_row_column_shead_ehead!\n'+\
' Use layer_row_column_data instead.')
layer_row_column_data = layer_row_column_shead_ehead
else:
raise Exception(
'Failed to specify layer_row_column_shead_ehead or layer_row_column_data.'
)
self.mxactp, self.layer_row_column_data = self.assign_layer_row_column_data(
layer_row_column_data, 5, zerobase=zerobase)
self.mxcos, self.cosines = self.assign_layer_row_column_data(
cosines, 3, zerobase=False
) # misuse of this function - zerobase needs to be False
'''self.mxcos = 0
if (cosines != None):
error_message = 'cosines must have 3 columns'
if (not isinstance(cosines, list)):
cosines = [cosines]
for a in cosines:
a = np.atleast_2d(a)
nr, nc = a.shape
assert nc == 3, error_message
if (nr > self.mxcos):
self.mxcos = nr
self.cosines = cosines'''
self.np = 0
self.parent.add_package(self)
def __init__(self,
model,
stress_period_data=None,
dtype=None,
extension='chd',
unitnumber=24,
**kwargs):
# Call ancestor's init to set self.parent, extension, name and unit number
Package.__init__(self, model, extension, 'CHD', unitnumber)
self.url = 'chd.htm'
self.heading = '# CHD for MODFLOW, generated by Flopy.'
if dtype is not None:
self.dtype = dtype
else:
self.dtype = self.get_default_dtype()
self.stress_period_data = mflist(model, self.dtype, stress_period_data)
self.np = 0
self.parent.add_package(self)
def __init__(self,
model,
hnoflo=-9999.,
hdry=-8888.,
def_face_ct=0,
bud_label=None,
def_iface=None,
laytyp=0,
ibound=1,
prsity=0.30,
prsityCB=0.30,
extension='mpbas',
unitnumber=86):
"""
Package constructor.
"""
Package.__init__(self, model, extension, 'MPBAS', unitnumber)
nrow, ncol, nlay, nper = self.parent.mf.nrow_ncol_nlay_nper
self.parent.mf.get_name_file_entries()
self.heading1 = '# MPBAS for Modpath, generated by Flopy.'
self.heading2 = '#'
self.hnoflo = hnoflo
self.hdry = hdry
self.def_face_ct = def_face_ct
self.bud_label = bud_label
self.def_iface = def_iface
self.laytyp = laytyp
self.__ibound = util_3d(model, (nlay, nrow, ncol),
np.int,
ibound,
name='ibound',
locat=self.unit_number[0])
self.prsity = prsity
self.prsityCB = prsityCB
self.prsity = util_3d(model,(nlay,nrow,ncol),np.float32,\
prsity,name='prsity',locat=self.unit_number[0])
self.prsityCB = util_3d(model,(nlay,nrow,ncol),np.float32,\
prsityCB,name='prsityCB',locat=self.unit_number[0])
self.parent.add_package(self)
def __init__(self, model, mxiter=50, iiter=30, iadamp=0, \
hclose=1e-5, rclose=1e-5, relax=1.0, ioutgmg=0, \
ism=0, isc=0, damp=1.0,dup=0.75,dlow=0.01,\
chglimit=1.0,extension='gmg', unitnumber=27):
Package.__init__(self, model, extension, 'GMG', unitnumber) # Call ancestor's init to set self.parent, extension, name and unit number
self.heading = '# GMG for MODFLOW, generated by Flopy.'
self.url = 'gmg.htm'
self.mxiter = mxiter
self.iiter = iiter
self.iadamp = iadamp
self.hclose = hclose
self.rclose = rclose
self.relax = relax
self.ism = ism
self.isc = isc
self.dup = dup
self.dlow = dlow
self.chglimit = chglimit
self.damp = damp
self.ioutgmg = ioutgmg
self.iunitmhc = 0
self.parent.add_package(self)
