def test__ip_range(fmc):
logging.info("Test IPRange. Post, get, put, delete Range Objects.")
starttime = str(int(time.time()))
namer = f"_fmcapi_test_{starttime}"
obj1 = fmcapi.Ranges(fmc=fmc)
obj1.name = namer
obj1.value = "1.1.1.1-2.2.2.2"
obj1.post()
time.sleep(1)
del obj1
obj1 = fmcapi.Ranges(fmc=fmc, name=namer)
obj1.get()
obj1.value = "3.3.3.3-4.4.4.4"
obj1.put()
time.sleep(1)
obj1.delete()
logging.info("Test IPRange done.\n")
def test__acp_rule(fmc):
logging.info(
"In preparation for testing ACPRule methods, set up some known objects in the FMC."
)
starttime = str(int(time.time()))
namer = f"_fmcapi_test_{starttime}"
# Build an IP host object
iphost1 = fmcapi.Hosts(fmc=fmc, name="_iphost1", value="7.7.7.7")
iphost1.post()
# Build an IP Network object
ipnet1 = fmcapi.Networks(fmc=fmc, name="_ipnet1", value="1.2.3.0/24")
ipnet1.post()
# Build an IP range object
iprange1 = fmcapi.Ranges(fmc=fmc,
name="_iprange1",
value="6.6.6.6-7.7.7.7")
iprange1.post()
# Build a Network Group object
ipnet2 = fmcapi.Networks(fmc=fmc, name="_ipnet2", value="5.5.5.0/24")
ipnet2.post()
time.sleep(1)
# Build an FQDNS object
fqdns1 = fmcapi.FQDNS(fmc=fmc, name="_fqdns1", value="www.cisco.com")
fqdns1.post()
obj1 = fmcapi.NetworkGroups(fmc=fmc, name="_fmcapi_test_networkgroup")
obj1.named_networks(action="add", name=ipnet2.name)
obj1.unnamed_networks(action="add", value="4.4.4.4/32")
obj1.post()
# Build a URL object
url1 = fmcapi.URLs(fmc=fmc, name="_url1", url="asdf.org")
url1.post()
url1.get()
# lists = [{"type": url1.type, "id": url1.id, "name": url1.name}]
# Build a VLAN Tag object
vlantag1 = fmcapi.VlanTags(fmc=fmc,
name="_vlantag1",
data={
"startTag": "888",
"endTag": "999"
})
vlantag1.post()
# Build a Port object
pport1 = fmcapi.ProtocolPortObjects(fmc=fmc,
name="_pport1",
port="9090",
protocol="UDP")
pport1.post()
# Build a Port Group Object
obj10 = fmcapi.ProtocolPortObjects(fmc=fmc,
name="_porttcp1",
port="8443",
protocol="TCP")
obj10.post()
obj11 = fmcapi.ProtocolPortObjects(fmc=fmc,
name="_portudp1",
port="161",
protocol="UDP")
obj11.post()
obj12 = fmcapi.ProtocolPortObjects(fmc=fmc,
name="_portrangetcp1",
port="0-1023",
protocol="TCP")
obj12.post()
obj2 = fmcapi.PortObjectGroups(fmc=fmc,
name="_fmcapi_test_portobjectgroup")
obj2.named_ports(action="add", name=obj10.name)
obj2.named_ports(action="add", name=obj11.name)
obj2.named_ports(action="add", name=obj12.name)
obj2.post()
# Build a Security Zone object
sz1 = fmcapi.SecurityZones(fmc=fmc, name="_sz1", interfaceMode="ROUTED")
sz1.post()
# Build an ACP Object
acp1 = fmcapi.AccessPolicies(fmc=fmc, name=namer)
acp1.post()
# Get a file_policy
# fp = fmcapi.FilePolicies(fmc=fmc1, name='daxm_test')
time.sleep(1)
logging.info("Setup of objects for ACPRule test done.\n")
logging.info(
"Test ACPRule. Try to test all features of all methods of the ACPRule class."
)
acprule1 = fmcapi.AccessRules(fmc=fmc, acp_name=acp1.name)
acprule1.name = namer
acprule1.action = "ALLOW"
acprule1.enabled = False
acprule1.sendEventsToFMC = True
acprule1.logFiles = False
acprule1.logBegin = True
acprule1.logEnd = True
acprule1.variable_set(action="set", name="Default-Set")
acprule1.source_zone(action="add", name=sz1.name)
acprule1.destination_zone(action="add", name=sz1.name)
acprule1.intrusion_policy(action="set", name="Security Over Connectivity")
acprule1.vlan_tags(action="add", name=vlantag1.name)
acprule1.source_port(action="add", name=pport1.name)
acprule1.destination_port(action="add", name=pport1.name)
acprule1.destination_port(action="add", name=obj2.name)
acprule1.source_network(action="add", name=iphost1.name)
acprule1.source_network(action="add", name=obj1.name)
acprule1.source_network(action="add", name=iprange1.name)
acprule1.destination_network(action="add", name=ipnet1.name)
acprule1.destination_network(action="add", name=iprange1.name)
acprule1.destination_network(action="add", name=fqdns1.name)
# acprule1.urls(name=url1.name)
# acprule1.file_policy(action='set', name=fp.name)
acprule1.post()
logging.info("Test ACPRule done.\n")
logging.info("Cleanup of testing ACPRule methods.")
acprule1.delete()
time.sleep(1)
acp1.delete()
iphost1.delete()
ipnet1.delete()
iprange1.delete()
fqdns1.delete()
obj1.delete()
ipnet2.delete()
url1.delete()
vlantag1.delete()
pport1.delete()
sz1.delete()
obj2.delete()
obj10.delete()
obj11.delete()
obj12.delete()
logging.info("Cleanup of objects for ACPRule test done.\n")
def test__autonat(fmc):
logging.info("Testing AutoNatPolicy class.")
starttime = str(int(time.time()))
namer = f"_fmcapi_test_{starttime}"
# Create a container policy for FTD NAT rules
natpol1 = fmcapi.FTDNatPolicies(fmc=fmc, name=namer)
natpol1.post()
natpol1.get()
# Create original and translate objects
obj1 = fmcapi.Networks(fmc=fmc)
obj1.name = "_net_original"
obj1.value = "10.0.0.0/8"
obj1.post()
time.sleep(1)
obj2 = fmcapi.Hosts(fmc=fmc)
obj2.name = "_net_xlate"
obj2.value = "192.0.2.1"
obj2.post()
time.sleep(1)
# Create identity nat object
obj3 = fmcapi.Networks(fmc=fmc)
obj3.name = "_net_identity"
obj3.value = "192.168.0.0/24"
obj3.post()
time.sleep(1)
# Create nat pool objects
obj4 = fmcapi.Networks(fmc=fmc)
obj4.name = "_net_original_pool"
obj4.value = "172.16.0.0/24"
obj4.post()
time.sleep(1)
# PAT Pool must be a range, not a subnet
obj5 = fmcapi.Ranges(fmc=fmc)
obj5.name = "_net_xlate_pool"
obj5.value = "192.0.2.128-192.0.2.254"
obj5.post()
time.sleep(1)
# Create interface PAT object
obj6 = fmcapi.Networks(fmc=fmc)
obj6.name = "_net_original_intf"
obj6.value = "192.168.1.0/24"
obj6.post()
time.sleep(1)
# Create Security Zones
sz1 = fmcapi.SecurityZones(fmc=fmc, name="IG-INSIDE")
sz1.post()
sz2 = fmcapi.SecurityZones(fmc=fmc, name="SZ-OUTSIDE1")
sz2.post()
# Autonat a network object to a host
autonat1 = fmcapi.AutoNatRules(fmc=fmc)
autonat1.original_network(name="_net_original")
autonat1.translated_network(name="_net_xlate")
autonat1.natType = "STATIC"
# Source and destination interface can be either an interface group or security zone
autonat1.source_intf(name="IG-INSIDE")
autonat1.destination_intf(name="SZ-OUTSIDE1")
autonat1.nat_policy(name=namer)
# Autonat identity nat
autonat2 = fmcapi.AutoNatRules(fmc=fmc)
autonat2.identity_nat(name="_net_identity")
autonat2.source_intf(name="IG-INSIDE")
autonat2.destination_intf(name="SZ-OUTSIDE1")
autonat2.nat_policy(name=namer)
# Autonat nat pool
autonat3 = fmcapi.AutoNatRules(fmc=fmc)
autonat3.original_network(name="_net_original_pool")
autonat3.patPool(name="_net_xlate_pool")
autonat3.source_intf(name="IG-INSIDE")
autonat3.destination_intf(name="SZ-OUTSIDE1")
autonat3.nat_policy(name=namer)
# Autonat interface PAT
autonat4 = fmcapi.AutoNatRules(fmc=fmc)
autonat4.original_network(name="_net_original_intf")
autonat4.natType = "DYNAMIC"
autonat4.source_intf(name="IG-INSIDE")
autonat4.destination_intf(name="SZ-OUTSIDE1")
autonat4.nat_policy(name=namer)
autonat4.interfaceInTranslatedNetwork = True
autonat1.post()
autonat2.post()
autonat3.post()
autonat4.post()
"""
# Associate a nat policy to a device
# Do not uncomment if you do not have a device registered to FMC
# Use name of device or deviceHAPair as applicable
pol_devices = [{"name": "deviceHAName", "type": "deviceHAPair"}]
assign1 = fmcapi.PolicyAssignments(fmc=fmc)
assign1.ftd_natpolicy(name=namer, devices=pol_devices)
assign1.post()
assign1.ftd_natpolicy(name=namer, devices=[])
assign1.put()
"""
natpol1.delete()
obj1.delete()
obj2.delete()
obj3.delete()
obj4.delete()
obj5.delete()
obj6.delete()
sz1.delete()
sz2.delete()
def test__manualnat(fmc):
logging.info("Testing ManualNatRules class.")
starttime = str(int(time.time()))
namer = f"_fmcapi_test_{starttime}"
# Create a container policy for FTD NAT rules
natpol1 = fmcapi.FTDNatPolicies(fmc=fmc, name=namer)
natpol1.post()
natpol1.get()
# Create original and translate objects
obj1 = fmcapi.Networks(fmc=fmc)
obj1.name = "_net_original"
obj1.value = "10.0.0.0/8"
obj1.post()
time.sleep(1)
obj2 = fmcapi.Hosts(fmc=fmc)
obj2.name = "_net_xlate"
obj2.value = "192.0.2.1"
obj2.post()
time.sleep(1)
# Create identity nat object
obj3 = fmcapi.Networks(fmc=fmc)
obj3.name = "_net_identity"
obj3.value = "192.168.0.0/24"
obj3.post()
time.sleep(1)
# Create nat pool objects
obj4 = fmcapi.Networks(fmc=fmc)
obj4.name = "_net_original_pool"
obj4.value = "172.16.0.0/24"
obj4.post()
time.sleep(1)
# PAT Pool must be a range, not a subnet
obj5 = fmcapi.Ranges(fmc=fmc)
obj5.name = "_net_xlate_pool"
obj5.value = "192.0.2.128-192.0.2.254"
obj5.post()
time.sleep(1)
# Create interface PAT object
obj6 = fmcapi.Networks(fmc=fmc)
obj6.name = "_net_original_intf"
obj6.value = "192.168.1.0/24"
obj6.post()
# Create NAT divert objects
obj7 = fmcapi.Hosts(fmc=fmc)
obj7.name = "_net_source_divert"
obj7.value = "172.30.1.1"
obj7.post()
time.sleep(1)
obj8 = fmcapi.Hosts(fmc=fmc)
obj8.name = "_net_destination_divert"
obj8.value = "4.2.2.2"
obj8.post()
time.sleep(1)
# Create port-based NAT objects
obj9 = fmcapi.Hosts(fmc=fmc)
obj9.name = "_net_source_portbased"
obj9.value = "172.30.1.2"
obj9.post()
time.sleep(1)
obj10 = fmcapi.Hosts(fmc=fmc)
obj10.name = "_net_xlate_portbased"
obj10.value = "192.0.2.254"
obj10.post()
time.sleep(1)
obj11 = fmcapi.ProtocolPortObjects(fmc=fmc)
obj11.name = "_port_original"
obj11.protocol = "TCP"
obj11.port = "443"
obj11.post()
time.sleep(1)
obj12 = fmcapi.ProtocolPortObjects(fmc=fmc)
obj12.name = "_port_xlate"
obj12.protocol = "TCP"
obj12.port = "8443"
obj12.post()
time.sleep(1)
# Create Security Zones
sz1 = fmcapi.SecurityZones(fmc=fmc, name="IG-INSIDE")
sz1.post()
sz2 = fmcapi.SecurityZones(fmc=fmc, name="SZ-OUTSIDE1")
sz2.post()
# Manualnat a network object to a host
manualnat1 = fmcapi.ManualNatRules(fmc=fmc)
manualnat1.original_source(name="_net_original")
manualnat1.translated_source(name="_net_xlate")
manualnat1.natType = "STATIC"
# Source and destination interface can be either an interface group or security zone
manualnat1.source_intf(name="IG-INSIDE")
manualnat1.destination_intf(name="SZ-OUTSIDE1")
manualnat1.enabled = True
manualnat1.nat_policy(name=namer)
# Manualnat identity nat
manualnat2 = fmcapi.ManualNatRules(fmc=fmc)
manualnat2.identity_nat(name="_net_identity")
manualnat2.source_intf(name="IG-INSIDE")
manualnat2.destination_intf(name="SZ-OUTSIDE1")
manualnat2.enabled = True
manualnat2.nat_policy(name=namer)
# Manualnat nat pool
manualnat3 = fmcapi.ManualNatRules(fmc=fmc)
manualnat3.original_source(name="_net_original_pool")
manualnat3.patPool(name="_net_xlate_pool")
manualnat3.source_intf(name="IG-INSIDE")
manualnat3.destination_intf(name="SZ-OUTSIDE1")
manualnat3.enabled = True
manualnat3.nat_policy(name=namer)
# Manualnat interface PAT
manualnat4 = fmcapi.ManualNatRules(fmc=fmc)
manualnat4.original_source(name="_net_original_intf")
manualnat4.natType = "DYNAMIC"
manualnat4.unidirectional = True
manualnat4.source_intf(name="IG-INSIDE")
manualnat4.destination_intf(name="SZ-OUTSIDE1")
manualnat4.nat_policy(name=namer)
manualnat4.enabled = True
manualnat4.interfaceInTranslatedSource = True
# Manualnat divert
manualnat5 = fmcapi.ManualNatRules(fmc=fmc)
manualnat5.identity_nat(name="_net_source_divert")
manualnat5.original_destination(name="_net_destination_divert")
manualnat5.source_intf(name="IG-INSIDE")
manualnat5.destination_intf(name="SZ-OUTSIDE1")
manualnat5.enabled = True
manualnat5.nat_policy(name=namer)
# Manualnat port-based
manualnat6 = fmcapi.ManualNatRules(fmc=fmc)
manualnat6.original_source(name="_net_source_portbased")
manualnat6.original_source_port(name="_port_original")
manualnat6.translated_source(name="_net_xlate_portbased")
manualnat6.translated_source_port(name="_port_xlate")
manualnat6.natType = "STATIC"
manualnat6.source_intf(name="IG-INSIDE")
manualnat6.destination_intf(name="SZ-OUTSIDE1")
manualnat6.enabled = True
manualnat6.nat_policy(name=namer)
manualnat1.post()
manualnat2.post()
manualnat3.post()
manualnat4.post()
manualnat5.post()
manualnat6.post()
"""
# Associate a nat policy to a device
# Do not uncomment if you do not have a device registered to FPMC
# Use name of device or deviceHAPair as applicable
pol_devices = [{"name": "ftdv-HA", "type": "deviceHAPair"}]
assign1 = PolicyAssignments(fmc=fmc)
assign1.ftd_natpolicy(name=namer, devices=pol_devices)
assign1.post()
assign1.ftd_natpolicy(name=namer, devices=[])
assign1.put()
"""
logging.info("Cleanup of testing ManualNatRule methods.")
natpol1.delete()
obj1.delete()
obj2.delete()
obj3.delete()
obj4.delete()
obj5.delete()
obj6.delete()
obj7.delete()
obj8.delete()
obj9.delete()
obj10.delete()
obj11.delete()
obj12.delete()
sz1.delete()
sz2.delete()