def _get_thermostat_pid(self):
thermostat = Thermostat.create(number=1,
name='thermostat 1',
sensor=Sensor.create(number=10),
pid_heating_p=200,
pid_heating_i=100,
pid_heating_d=50,
pid_cooling_p=200,
pid_cooling_i=100,
pid_cooling_d=50,
automatic=True,
room=None,
start=0,
valve_config='equal',
thermostat_group=self._thermostat_group)
ValveToThermostat.create(thermostat=thermostat,
valve=Valve.create(
number=1,
name='valve 1',
output=Output.create(number=1)),
mode=ThermostatGroup.Modes.HEATING,
priority=0)
ValveToThermostat.create(thermostat=thermostat,
valve=Valve.create(
number=2,
name='valve 2',
output=Output.create(number=2)),
mode=ThermostatGroup.Modes.COOLING,
priority=0)
Preset.create(type=Preset.Types.SCHEDULE,
heating_setpoint=20.0,
cooling_setpoint=25.0,
active=True,
thermostat=thermostat)
return ThermostatPid(thermostat=thermostat,
pump_valve_controller=self._pump_valve_controller)
def test_thermostat_control(self):
thermostat = Thermostat.create(number=1,
name='thermostat 1',
sensor=Sensor.create(number=10),
pid_heating_p=200,
pid_heating_i=100,
pid_heating_d=50,
pid_cooling_p=200,
pid_cooling_i=100,
pid_cooling_d=50,
automatic=True,
room=None,
start=0,
valve_config='equal',
thermostat_group=self._thermostat_group)
Output.create(number=1)
Output.create(number=2)
Output.create(number=3)
valve_output = Output.create(number=4)
valve = Valve.create(number=1,
name='valve 1',
output=valve_output)
ValveToThermostat.create(thermostat=thermostat,
valve=valve,
mode=ThermostatGroup.Modes.HEATING,
priority=0)
self._thermostat_controller.refresh_config_from_db()
expected = ThermostatGroupStatusDTO(id=0,
on=True,
setpoint=0,
cooling=False,
automatic=True,
statusses=[ThermostatStatusDTO(id=1,
name='thermostat 1',
automatic=True,
setpoint=0,
sensor_id=10,
actual_temperature=10.0,
setpoint_temperature=14.0,
outside_temperature=10.0,
output_0_level=0,
output_1_level=0,
mode=0,
airco=0)])
self.assertEqual(expected, self._thermostat_controller.get_thermostat_status())
self._thermostat_controller.set_current_setpoint(thermostat_number=1, heating_temperature=15.0)
expected.statusses[0].setpoint_temperature = 15.0
self.assertEqual(expected, self._thermostat_controller.get_thermostat_status())
self._thermostat_controller.set_per_thermostat_mode(thermostat_number=1,
automatic=True,
setpoint=16.0)
expected.statusses[0].setpoint_temperature = 16.0
self.assertEqual(expected, self._thermostat_controller.get_thermostat_status())
preset = self._thermostat_controller.get_current_preset(thermostat_number=1)
self.assertTrue(preset.active)
self.assertEqual(30.0, preset.cooling_setpoint)
self.assertEqual(16.0, preset.heating_setpoint)
self.assertEqual(Preset.Types.SCHEDULE, preset.type)
self._thermostat_controller.set_current_preset(thermostat_number=1, preset_type=Preset.Types.PARTY)
expected.statusses[0].setpoint_temperature = 14.0
expected.statusses[0].setpoint = expected.setpoint = 5 # PARTY = legacy `5` setpoint
expected.statusses[0].automatic = expected.automatic = False
self.assertEqual(expected, self._thermostat_controller.get_thermostat_status())
self._thermostat_controller.set_thermostat_mode(thermostat_on=True, cooling_mode=True, cooling_on=True, automatic=False, setpoint=4)
expected.statusses[0].setpoint_temperature = 30.0
expected.statusses[0].setpoint = expected.setpoint = 4 # VACATION = legacy `4` setpoint
expected.cooling = True
self.assertEqual(expected, self._thermostat_controller.get_thermostat_status())
self._thermostat_controller.set_thermostat_mode(thermostat_on=True, cooling_mode=False, cooling_on=True, automatic=True)
expected.statusses[0].setpoint_temperature = 16.0
expected.statusses[0].setpoint = expected.setpoint = 0 # AUTO = legacy `0/1/2` setpoint
expected.statusses[0].automatic = expected.automatic = True
expected.cooling = False
self.assertEqual(expected, self._thermostat_controller.get_thermostat_status())
def test_save_pumpgroups(self):
thermostat = Thermostat.create(number=1,
name='thermostat 1',
sensor=Sensor.create(number=10),
pid_heating_p=200,
pid_heating_i=100,
pid_heating_d=50,
pid_cooling_p=200,
pid_cooling_i=100,
pid_cooling_d=50,
automatic=True,
room=None,
start=0,
valve_config='equal',
thermostat_group=self._thermostat_group)
valve_1_output = Output.create(number=1)
valve_1 = Valve.create(number=1,
name='valve 1',
output=valve_1_output)
valve_2_output = Output.create(number=2)
valve_2 = Valve.create(number=2,
name='valve 2',
output=valve_2_output)
valve_3_output = Output.create(number=3)
valve_3 = Valve.create(number=3,
name='valve 3',
output=valve_3_output)
ValveToThermostat.create(thermostat=thermostat,
valve=valve_1,
mode=ThermostatGroup.Modes.HEATING,
priority=0)
ValveToThermostat.create(thermostat=thermostat,
valve=valve_2,
mode=ThermostatGroup.Modes.COOLING,
priority=0)
ValveToThermostat.create(thermostat=thermostat,
valve=valve_3,
mode=ThermostatGroup.Modes.HEATING,
priority=0)
Preset.create(type=Preset.Types.SCHEDULE,
heating_setpoint=20.0,
cooling_setpoint=25.0,
active=True,
thermostat=thermostat)
pump_output = Output.create(number=4)
pump = Pump.create(name='pump 1',
output=pump_output)
heating_pump_groups = self._thermostat_controller.load_heating_pump_groups()
self.assertEqual([PumpGroupDTO(id=pump.id,
pump_output_id=pump_output.id,
valve_output_ids=[],
room_id=None)], heating_pump_groups)
PumpToValve.create(pump=pump, valve=valve_1)
PumpToValve.create(pump=pump, valve=valve_2)
pump_groups = self._thermostat_controller.load_heating_pump_groups()
self.assertEqual([PumpGroupDTO(id=pump.id,
pump_output_id=pump_output.id,
valve_output_ids=[valve_1_output.id],
room_id=None)], pump_groups)
pump_groups = self._thermostat_controller.load_cooling_pump_groups()
self.assertEqual([PumpGroupDTO(id=pump.id,
pump_output_id=pump_output.id,
valve_output_ids=[valve_2_output.id],
room_id=None)], pump_groups)
self._thermostat_controller._save_pump_groups(ThermostatGroup.Modes.HEATING,
[(PumpGroupDTO(id=pump.id,
pump_output_id=pump_output.id,
valve_output_ids=[valve_1_output.id, valve_3_output.id]),
['pump_output_id', 'valve_output_ids'])])
pump_groups = self._thermostat_controller.load_heating_pump_groups()
self.assertEqual([PumpGroupDTO(id=pump.id,
pump_output_id=pump_output.id,
valve_output_ids=[valve_1_output.id, valve_3_output.id],
room_id=None)], pump_groups)
pump_groups = self._thermostat_controller.load_cooling_pump_groups()
self.assertEqual([PumpGroupDTO(id=pump.id,
pump_output_id=pump_output.id,
valve_output_ids=[valve_2_output.id],
room_id=None)], pump_groups)
def test_thermostat_group_crud(self):
thermostat = Thermostat.create(number=1,
name='thermostat 1',
sensor=Sensor.create(number=10),
pid_heating_p=200,
pid_heating_i=100,
pid_heating_d=50,
pid_cooling_p=200,
pid_cooling_i=100,
pid_cooling_d=50,
automatic=True,
room=None,
start=0,
valve_config='equal',
thermostat_group=self._thermostat_group)
Output.create(number=1)
Output.create(number=2)
Output.create(number=3)
valve_output = Output.create(number=4)
valve = Valve.create(number=1,
name='valve 1',
output=valve_output)
ValveToThermostat.create(thermostat=thermostat,
valve=valve,
mode=ThermostatGroup.Modes.HEATING,
priority=0)
thermostat_group = ThermostatGroup.get(number=0) # type: ThermostatGroup
self.assertEqual(10.0, thermostat_group.threshold_temperature)
self.assertEqual(0, OutputToThermostatGroup.select()
.where(OutputToThermostatGroup.thermostat_group == thermostat_group)
.count())
self._thermostat_controller.save_thermostat_group((ThermostatGroupDTO(id=0,
outside_sensor_id=1,
pump_delay=30,
threshold_temperature=15,
switch_to_heating_0=(1, 0),
switch_to_heating_1=(2, 100),
switch_to_cooling_0=(1, 100)),
['outside_sensor_id', 'pump_delay', 'threshold_temperature',
'switch_to_heating_0', 'switch_to_heating_1',
'switch_to_cooling_0']))
thermostat_group = ThermostatGroup.get(number=0)
self.assertEqual(15.0, thermostat_group.threshold_temperature)
links = [{'index': link.index, 'value': link.value, 'mode': link.mode, 'output': link.output_id}
for link in (OutputToThermostatGroup.select()
.where(OutputToThermostatGroup.thermostat_group == thermostat_group))]
self.assertEqual(3, len(links))
self.assertIn({'index': 0, 'value': 0, 'mode': 'heating', 'output': 1}, links)
self.assertIn({'index': 1, 'value': 100, 'mode': 'heating', 'output': 2}, links)
self.assertIn({'index': 0, 'value': 100, 'mode': 'cooling', 'output': 1}, links)
new_thermostat_group_dto = ThermostatGroupDTO(id=0,
outside_sensor_id=1,
pump_delay=60,
threshold_temperature=10,
switch_to_heating_0=(1, 50),
switch_to_cooling_0=(2, 0))
self._thermostat_controller.save_thermostat_group((new_thermostat_group_dto,
['outside_sensor_id', 'pump_delay', 'threshold_temperature',
'switch_to_heating_0', 'switch_to_heating_1', 'switch_to_cooling_0']))
thermostat_group = ThermostatGroup.get(number=0)
self.assertEqual(10.0, thermostat_group.threshold_temperature)
links = [{'index': link.index, 'value': link.value, 'mode': link.mode, 'output': link.output_id}
for link in (OutputToThermostatGroup.select()
.where(OutputToThermostatGroup.thermostat_group == thermostat_group))]
self.assertEqual(2, len(links))
self.assertIn({'index': 0, 'value': 50, 'mode': 'heating', 'output': 1}, links)
self.assertIn({'index': 0, 'value': 0, 'mode': 'cooling', 'output': 2}, links)
self.assertEqual(new_thermostat_group_dto, self._thermostat_controller.load_thermostat_group())