def test_port_channel_interface(self):
# For failures
self.maxDiff = None
# Set Genie Tb
testbed = Testbed()
Genie.testbed = testbed
# Device
dev1 = Device(name='PE1', testbed=testbed, os='nxos')
intf1 = Interface(name='port-channel10', device=dev1)
# Apply configuration
intf1.channel_group_mode = 'on'
intf1.switchport_enable = False
intf1.ipv4 = '11.0.1.1/24'
intf1.shutdown = False
intf1.switchport_enable = False
intf1.mtu = 9111
uut1_int3 = Interface(name='Ethernet0/0/1',device=dev1)
intf1.add_member(uut1_int3)
# Build config
cfgs = intf1.build_config(apply=False)
# Check config build correctly
self.assertMultiLineEqual(
str(cfgs),
'\n'.join([
'interface Ethernet0/0/1',
' channel-group 10 mode on',
' exit',
'interface port-channel10',
' mtu 9111',
' no shutdown',
' no switchport',
' ip address 11.0.1.1 255.255.255.0',
' exit'
]))
# Build unconfig
uncfgs = intf1.build_unconfig(apply=False)
# Check config build correctly
self.assertMultiLineEqual(
str(uncfgs),
'\n'.join([
'interface Ethernet0/0/1',
' no channel-group 10 mode on',
' exit',
'no interface port-channel10'
]))
def test_port_channel_interface_trunk_vlans(self):
# For failures
self.maxDiff = None
# Set Genie Tb
testbed = Testbed()
Genie.testbed = testbed
# Device
dev1 = Device(name='PE1', testbed=testbed, os='nxos')
intf1 = Interface(name='port-channel10', device=dev1)
# Apply configuration
intf1.channel_group_mode = 'active'
intf1.enabled = True
intf1.switchport_enable = True
intf1.switchport_mode = 'trunk'
intf1.trunk_vlans = "2-5,11-105,111-205"
uut1_int3 = Interface(name='Ethernet0/0/1', device=dev1)
intf1.add_member(uut1_int3)
# Build config
cfgs = intf1.build_config(apply=False)
# Check config build correctly
self.assertMultiLineEqual(
str(cfgs), '\n'.join([
'interface Ethernet0/0/1', ' channel-group 10 mode active',
' exit', 'interface port-channel10', ' no shutdown',
' switchport', ' switchport mode trunk',
' switchport trunk allowed vlan 2-5,11-105,111-205', ' exit'
]))
# Build unconfig
uncfgs = intf1.build_unconfig(apply=False)
# Check config build correctly
self.assertMultiLineEqual(
str(uncfgs), '\n'.join([
'interface Ethernet0/0/1', ' no channel-group 10 mode active',
' exit', 'no interface port-channel10'
]))
