def testscenario11():
set_config('01', '11', '02')
time.sleep(0.2)
profile = switchCase2(str(getPanel()))
if (profile == 'invalid configuration'):
FILE = open('TC1_ONOFF2_SUB_2.txt', 'a')
print(profile, file=FILE)
FILE.close()
return False
#Escolha de um momento aleatório para começar a pressionar o botão ON/OFF
press = random.randint(2, profile)
#Escolha do momento de soltar o botão ON/OFF
release = profile - press + random.randint(1, 3)
rhex = hex(release * 10)[2:]
if (len(rhex) % 2 != 0):
rhex = '0' + rhex
set_config('01', '12', '02')
time.sleep(0.2)
time.sleep(press)
set_config('01', '12', rhex)
time.sleep(release)
s = 0
r = 0
for i in range(5):
panel_before = getPanel()
r = sum(panel_before)
if (r > s):
s = r
soc = panel_before
time.sleep(5)
panel_after = getPanel()
possibilities = [[1, 1, 1, 1], [0, 1, 1, 1], [0, 0, 1, 1], [0, 0, 0, 1]]
if (soc not in possibilities):
FILE = open('TC1_ONOFF2_SUB_3.txt', 'a')
print('{}\t{}\t{}'.format(press, release, soc), file=FILE)
FILE.close()
return False
else:
if (panel_after in possibilities):
FILE = open('TC1_ONOFF2_SUB_3.txt', 'a')
print('{}\t{}\t{}\t{}'.format(press, release, soc, panel_after),
file=FILE)
FILE.close()
return False
else:
return True
def testscenario3():
rtime = random.randint(10, 30)
rhex = hex(rtime)[2:]
if (len(rhex) < 2):
rhex = '0' + rhex
set_config('01', '12', '0A')
time.sleep(1)
panel_before = getPanel()
time.sleep(5)
set_config('01', '11', rhex)
time.sleep(rtime / 10)
buz = getBuzzer()
if (len(buz) == 0
): #mudar depois para um teste com o período correto do buzzer
FILE = open('TC1_SETA1_SUB_3.txt', 'a')
print('No beeps', file=FILE)
print('{}\n'.format(rtime), file=FILE)
return False
else:
vbat = getBatLvl()
print(vbat)
if (vbat < 3.8 and getPotLum() > 0):
FILE = open('TC1_SETA1_SUB_3.txt', 'a')
print('Blue LED on although battery below 3.8V', file=FILE)
print('{}\n'.format(vbat), file=FILE)
FILE.close()
return False
elif (vbat < 3.8 and getPotLum() == 0):
panel_after = getPanel()
i, j = getIndex(panel_before, panel_after)
if ((j - i) == 1 or (i - j) == 3):
print("teste ok")
return True
else:
FILE = open('TC1_SETA1_SUB_3.txt', 'a')
print(
'falha. a ativacao de seta 1 vez nao mudou o perfil na ordem estabelecida',
file=FILE)
print('Random time: {}\tPanel before: {}\tPanel after: {}'.
format(rtime, panel_before, panel_after))
return False
else:
FILE = open('TC1_SETA1_SUB_3.txt', 'a')
print(
'Unexpected behavior\nBattery: {}\t LED Power:{}\t Panel before: {}\tPanel after: {}'
.format(vbat, getPotLum(), panel_after, panel_before),
file=FILE)
FILE.close()
return False
def testscenario4():
set_config('01', '11', '02')
time.sleep(0.2)
panel = getPanel()
profile = switchCase2(str(panel))
if (profile == 'invalid configuration'):
FILE = open('TC2_ONOFF_1.txt', 'a')
print('Unexpected profile value', file=FILE)
FILE.close()
return False
set_config('01', '12', '02')
time.sleep(0.2)
rtime = random.randint(1, profile - 2)
time.sleep(rtime)
set_config('01', '12', '02')
time.sleep(0.2)
if (getPotLum() != 0):
FILE = open('TC2_ONOFF_2.txt', 'a')
print('Blue LED is on: {}\t{}\t{}'.format(profile, rtime, getPotLum()),
file=FILE)
FILE.close()
return False
else:
return True
def testscenario4():
if (getPotLum() != 0):
FILE = open('TC1_SETA2_SUB_1.txt', 'a')
print('Blue LED not on yet', file=FILE)
FILE.write('{}\n'.format(getPotLum()))
FILE.close()
return False
else:
set_config('01', '11', '02')
time.sleep(0.2)
panel_before = getPanel()
set_config('01', '12', '15')
time.sleep(1.5)
rtime = random.randint(10, 15)
rhex = hex(rtime)[2:]
if (len(rhex) < 2):
rhex = '0' + rhex
set_config('01', '11', rhex)
time.sleep(rtime / 10)
time.sleep(3)
set_config('01', '12', '0a')
time.sleep(2)
set_config('01', '12', '0a')
time.sleep(1)
panel_after = getPanel()
if (panel_before != panel_after):
FILE = open('TC1_SETA2_SUB_1.txt', 'a')
print('SETA caused change during battery monitoring', file=FILE)
FILE.write(
'Panel before: {}\tPanel after: {}\tRandom time:{}\n'.format(
panel_before, panel_after, rtime))
FILE.close()
return False
else:
print('teste passou')
return True
def testscenario3():
set_config('01', '11', '02')
time.sleep(0.2)
panel = getPanel()
profile = switchCase2(str(panel))
if (profile == 'invalid configuration'):
FILE = open('TC2_ONOFF_1.txt', 'a')
print('Unexpected profile value. Random time', file=FILE)
FILE.close()
return False
rtime = random.randint(2, 9)
rhex = hex(rtime)[2:]
if (len(rhex) < 2):
rhex = '0' + rhex
set_config('01', '12', rhex)
time.sleep(rtime / 10)
buz = getBuzzer()
if (len(buz) == 0):
FILE = open('TC2_ONOFF_1.txt', 'a')
print('No beeps.', file=FILE)
FILE.close()
return False
now = time.time()
future = now + profile
while (now <= future):
if (panel != getPanel()):
print(
'Panel value not assigned to profile:\nProfile: {}\tExpected Panel: {}\t Panel Now: {}'
.format(profile, panel, getPanel()),
file=FILE)
return False
now = time.time()
return True
def testscenario10():
set_config('01', '11', '02')
time.sleep(0.2)
profile = switchCase2(str(getPanel()))
if (profile == 'invalid configuration'):
FILE = open('TC1_ONOFF2_SUB_2.txt', 'a')
print(profile, file=FILE)
FILE.close()
return False
#Escolha de um momento aleatório para começar a pressionar o botão ON/OFF
press = random.randint(2, profile)
#Escolha do momento de soltar o botão ON/OFF
release = profile - press
rhex = hex(release * 10 + random.randint(2, 9))[2:]
if (len(rhex) % 2 != 0):
rhex = '0' + rhex
set_config('01', '12', '02')
time.sleep(0.2)
time.sleep(press)
set_config('01', '12', rhex)
time.sleep(release)
# Desliga o LED de cura
set_config('01', '12', '02')
time.sleep(0.2)
time.sleep(5)
if (getPotLum() == 0):
set_config('01', '12', '02')
time.sleep(0.2)
FILE = open('TC1_ONOFF2_SUB_2.txt', 'a')
print('{}\t{}\t{}'.format(profile, press, release), file=FILE)
FILE.close()
return False
else:
return True
def testscenario1():
set_config('01', '11', '05')
time.sleep(0.5)
panel = getPanel()
profile = switchCase(str(panel))
if (profile == 'invalid configuration'):
FILE = open('TC4_CEN_1.txt', 'a')
print('Unexpected profile value. Panel read: {}'.format(panel),
file=FILE)
FILE.close()
return False
set_config('01', '12', '02')
time.sleep(0.2)
curve = getCurve(profile)
for i in range(len(curve)):
if (curve[i][1] == 0):
if (i < 0 and i < len(curve) - 1):
curve[i][1] = (curve[i - 1][1] + curve[i + 1][1]) / 2
flag = []
if (profile == 10):
for c in curve:
if (mask10(c[1], c[0])):
flag.append(1)
else:
FILE = open('TC4_CEN_1.txt', 'a')
print(c, '\t', profile, file=FILE)
FILE.close()
flag.append(0)
elif (profile == 20):
for c in curve:
if (mask20(c[1], c[0])):
flag.append(1)
else:
FILE = open('TC4_CEN_1.txt', 'a')
print(c, '\t', profile, file=FILE)
FILE.close()
flag.append(0)
elif (profile == 40):
for c in curve:
if (mask40(c[1], c[0])):
flag.append(1)
else:
FILE = open('TC4_CEN_1.txt', 'a')
print(c, '\t', profile, file=FILE)
FILE.close()
flag.append(0)
else:
for c in curve:
if (mask60(c[1], c[0])):
flag.append(1)
else:
FILE = open('TC4_CEN_1.txt', 'a')
print(c, '\t', profile, file=FILE)
FILE.close()
flag.append(0)
if (min(flag) == 1):
return True
else:
return False
def testscenario2():
set_config('01', '12', '02')
time.sleep(0.2)
set_config('01', '12', '02')
time.sleep(0.2)
panel_before = switchCase2(str(getPanel()))
set_config('01', '12', '02')
time.sleep(0.2)
time.sleep(5)
set_config('01', '11', '02')
time.sleep(0.2)
panel_after = switchCase2(str(getPanel()))
if (getPotLum() == 0):
FILE = open('TC2_SETA_2.txt', 'a')
print('Panel before: {}\tPanel after: {}'.format(
panel_before, panel_after),
file=FILE)
FILE.close()
return False
if (panel_after == 'invalid configuration'
or panel_before == 'invalid configuration'):
FILE = open('TC2_SETA_2.txt', 'a')
print('Panel before: {}\tPanel after: {}'.format(
panel_before, panel_after),
file=FILE)
FILE.close()
return False
else:
buz = getBuzzer()
if (len(buz) == 0):
print('No beeps', file=FILE)
FILE.close()
return False
else:
if (panel_before == 10):
if (panel_after == 20):
return True
else:
print(panel_before, '\t', panel_after, file=FILE)
return False
elif (panel_before == 20):
if (panel_after == 40):
return True
else:
print(panel_before, '\t', panel_after, file=FILE)
return False
elif (panel_before == 40):
if (panel_after == 60):
return True
else:
print(panel_before, '\t', panel_after, file=FILE)
return False
elif (panel_before == 60):
if (panel_after == 10):
return True
else:
print(panel_before, '\t', panel_after, file=FILE)
return False
else:
return False
def testscenario1():
set_config('01', '12', '02')
time.sleep(0.2)
set_config('01', '12', '02')
time.sleep(0.2)
panel_before = switchCase2(str(getPanel()))
set_config('01', '11', '02')
time.sleep(0.2)
panel_after = switchCase2(str(getPanel()))
buz = getBuzzer()
if (len(buz) == 0):
FILE = open('TC2_SETA_1.txt', 'a')
print('No beeps', file=FILE)
FILE.close()
return False
else:
if (panel_before == 10):
if (panel_after == 20):
return True
else:
FILE = open('TC2_SETA_1.txt', 'a')
print(panel_before, '\t', panel_after, file=FILE)
FILE.close()
return False
elif (panel_before == 20):
if (panel_after == 40):
return True
else:
FILE = open('TC2_SETA_1.txt', 'a')
print(panel_before, '\t', panel_after, file=FILE)
FILE.close()
return False
elif (panel_before == 40):
if (panel_after == 60):
return True
else:
FILE = open('TC2_SETA_1.txt', 'a')
print(panel_before, '\t', panel_after, file=FILE)
FILE.close()
return False
elif (panel_before == 60):
if (panel_after == 10):
return True
else:
FILE = open('TC2_SETA_1.txt', 'a')
print('unexpecteed behavior\t{}\t{}'.format(
panel_before, panel_after),
file=FILE)
FILE.close()
return False
else:
FILE = open('TC2_SETA_1.txt', 'a')
print('unexpecteed behavior\t{}\t{}'.format(
panel_before, panel_after),
file=FILE)
FILE.close()
return False
def testscenario12():
rtime = random.randint(1, 4)
set_config('01', '12', '02')
time.sleep(0.2)
set_config('01', '12', '02')
time.sleep(0.2)
panel_before = getPanel()
if (panel_before == 'invalid configuration'):
FILE = open('TC1_ONOFF2_SUB_4.txt', 'a')
print('invalid configuration for panel', file=FILE)
FILE.close()
return False
profile = switchCase2(str(panel_before))
if (profile == 'invalid configuration'):
FILE = open('TC1_ONOFF2_SUB_4.txt', 'a')
print('invalid configuration for profile', file=FILE)
FILE.close()
return False
set_config('01', '12', '11')
time.sleep(1.1)
time.sleep(rtime)
set_config('01', '12', '02')
time.sleep(0.2)
curve = getCurve(profile)
flag = []
if (profile == 10):
for c in curve:
if (mask10(c[1], c[0])):
flag.append(1)
else:
FILE = open('TC1_ONOFF2_SUB_4.txt', 'a')
print(
'Power error.\nElapsed time: {}\tLED power: {}\t Profile: {}'
.format(c[0], c[1], profile),
file=FILE)
FILE.close()
flag.append(0)
elif (profile == 20):
for c in curve:
if (mask20(c[1], c[0])):
flag.append(1)
else:
FILE = open('TC1_ONOFF2_SUB_4.txt', 'a')
print(
'Power error.\nElapsed time: {}\tLED power: {}\t Profile: {}'
.format(c[0], c[1], profile),
file=FILE)
FILE.close()
flag.append(0)
elif (profile == 40):
for c in curve:
if (mask40(c[1], c[0])):
flag.append(1)
else:
FILE = open('TC1_ONOFF2_SUB_4.txt', 'a')
print(
'Power error.\nElapsed time: {}\tLED power: {}\t Profile: {}'
.format(c[0], c[1], profile),
file=FILE)
FILE.close()
flag.append(0)
else:
for c in curve:
if (mask60(c[1], c[0])):
flag.append(1)
else:
FILE = open('TC1_ONOFF2_SUB_4.txt', 'a')
print(
'Power error.\nElapsed time: {}\tLED power: {}\t Profile: {}'
.format(c[0], c[1], profile),
file=FILE)
FILE.close()
flag.append(0)
if (min(flag) == 1):
return True
else:
return False
def testscenario8():
rtime = random.randint(15, 50)
rhex = hex(rtime)[2:]
if (len(rhex) < 2):
rhex = '0' + rhex
set_config('01', '12', rhex)
time.sleep(rtime / 10)
s = 0
r = 0
for i in range(5):
panel_before = getPanel()
r = sum(panel_before)
if (r > s):
s = r
soc = panel_before
options = [[0, 0, 0, 1], [0, 0, 1, 1], [0, 1, 1, 1], [1, 1, 1, 1]]
if (soc not in options):
FILE = open('TC1_ONOFF1_SUB_3.txt', 'a')
print('Invalid state of charge.\nSOC: {}\tBattery: {}\n'.format(
soc, getBatVoltage()),
file=FILE)
FILE.close()
return False
else:
if (s == 4):
vbat = getBatVoltage()
if (vbat <= 4.1):
FILE = open('TC1_ONOFF1_SUB_3.txt', 'a')
print('SOC should be [1,1,1,1]\nSOC: {}\tBattery: {}'.format(
soc, vbat),
file=FILE)
FILE.close()
return False
elif (s == 3):
vbat = getBatVoltage()
if (vbat <= 4 or vbat >= 4.1):
FILE = open('TC1_ONOFF1_SUB_3.txt', 'a')
print('SOC should be [0,1,1,1]\nSOC: {}\tBattery: {}'.format(
soc, vbat),
file=FILE)
FILE.close()
return False
elif (s == 2):
vbat = getBatVoltage()
if (vbat <= 3.9 or vbat >= 4):
FILE = open('TC1_ONOFF1_SUB_3.txt', 'a')
print('SOC should be [0,0,1,1]\nSOC: {}\tBattery: {}'.format(
soc, vbat),
file=FILE)
FILE.close()
return False
elif (s == 1):
vbat = getBatVoltage()
if (vbat >= 3.9):
FILE = open('TC1_ONOFF1_SUB_3.txt', 'a')
print('SOC should be [0,0,0,1]\nSOC: {}\tBattery: {}'.format(
soc, vbat),
file=FILE)
FILE.close()
return False
time.sleep(5)
panel_after = getPanel()
if (panel_after != [0, 0, 0, 0]):
FILE = open('TC1_ONOFF1_SUB_3.txt', 'a')
print('Panel still on.\nPanel: {}\n'.format(panel_after), file=FILE)
FILE.close()
return False
else:
return True
def testscenario1():
rtime = random.randint(10, 30)
rhex = hex(rtime)[2:]
if (len(rhex) < 2):
rhex = '0' + rhex
FILE = open('randinfo.txt', 'w')
FILE.write('{}\n'.format(rtime))
FILE.close()
set_config('01', '11', rhex)
time.sleep(rtime / 10)
panel_before = getPanel()
set_config('01', '11', rhex)
time.sleep((rtime / 10))
panel_after = getPanel()
if (panel_before == 'invalid configuration'
or panel_after == 'invalid configuration'):
FILE = open('TC1_SETA1_SUB_1.txt', 'a')
print(
'Invalid configuration for panel:\nRandom time:{}\t Panel before:{}\t Panel after:{}\n\n'
.format(rtime, panel_before, panel_after),
file=FILE)
FILE.close()
return False
i, j = getIndex(panel_before, panel_after)
if ((j - i) == 1 or (i - j) == 3):
print("indices ok")
else:
FILE = open('TC1_SETA1_SUB_1.txt', 'a')
print(
'SETA activation do not provide valid transition.\nRandom time: {}\tPanel before: {}\tPanel after: {}'
.format(rtime, panel_before, panel_after),
file=FILE)
FILE.close()
return False
profile = switchCase2(str(panel_after))
set_config('01', '12', '02')
time.sleep(0.2)
curve = getCurve(profile)
flag = []
if (profile == 10):
for c in curve:
if (mask10(c[1], c[0])):
flag.append(1)
else:
FILE = open('TC1_ONOFF1_SUB_1.txt', 'a')
print(
'Power error.\nElapsed time: {}\tLED power: {}\t Profile: {}'
.format(c[0], c[1], profile),
file=FILE)
FILE.close()
flag.append(0)
elif (profile == 20):
for c in curve:
if (mask20(c[1], c[0])):
flag.append(1)
else:
FILE = open('TC1_ONOFF1_SUB_1.txt', 'a')
print(
'Power error.\nElapsed time: {}\tLED power: {}\t Profile: {}'
.format(c[0], c[1], profile),
file=FILE)
FILE.close()
flag.append(0)
elif (profile == 40):
for c in curve:
if (mask40(c[1], c[0])):
flag.append(1)
else:
FILE = open('TC1_ONOFF1_SUB_1.txt', 'a')
print(
'Power error.\nElapsed time: {}\tLED power: {}\t Profile: {}'
.format(c[0], c[1], profile),
file=FILE)
FILE.close()
flag.append(0)
else:
for c in curve:
if (mask60(c[1], c[0])):
flag.append(1)
else:
FILE = open('TC1_ONOFF1_SUB_1.txt', 'a')
print(
'Power error.\nElapsed time: {}\tLED power: {}\t Profile: {}'
.format(c[0], c[1], profile),
file=FILE)
FILE.close()
flag.append(0)
if (min(flag) == 1):
return True
else:
return False
def testscenario5():
if (getPotLum() != 0):
FILE = open('TC1_ONOFF1_SUB_1.txt', 'a')
FILE.write('Blue LED is not on yet;\nLED power: {}\n'.format(
getPotLum()))
FILE.close()
return False
else:
rtime = random.randint(2, 9)
rhex = hex(rtime)[2:]
if (len(rhex) < 2):
rhex = '0' + rhex
set_config('01', '12', rhex)
time.sleep(rtime / 10)
panel = getPanel()
panel = str(panel)
profile = switchCase2(panel)
if (profile == 'invalid configuration'):
FILE = open('TC1_ONOFF1_SUB_1.txt', 'a')
print(
'Invalid configuration for panel.\nPanel: {}\tRandom time: {}\n'
.format(panel, rtime),
file=FILE)
FILE.close()
return False
curve = getCurve(profile)
for i in range(len(curve)):
if (curve[i][1] == 0):
if (i > 0 and i < len(curve) - 1):
curve[i][1] = (curve[i - 1][1] + curve[i + 1][1]) / 2
set_config('01', '11', '02')
time.sleep(0.2)
flag = []
if (profile == 10):
for c in curve:
if (mask10(c[1], c[0])):
flag.append(1)
else:
FILE = open('TC1_ONOFF1_SUB_1.txt', 'a')
print(
'Power error.\nElapsed time: {}\tLED power: {}\t Profile: {}'
.format(c[0], c[1], profile),
file=FILE)
FILE.close()
flag.append(0)
elif (profile == 20):
for c in curve:
if (mask20(c[1], c[0])):
flag.append(1)
else:
FILE = open('TC1_ONOFF1_SUB_1.txt', 'a')
print(
'Power error.\nElapsed time: {}\tLED power: {}\t Profile: {}'
.format(c[0], c[1], profile),
file=FILE)
FILE.close()
flag.append(0)
elif (profile == 40):
for c in curve:
if (mask40(c[1], c[0])):
flag.append(1)
else:
FILE = open('TC1_ONOFF1_SUB_1.txt', 'a')
print(
'Power error.\nElapsed time: {}\tLED power: {}\t Profile: {}'
.format(c[0], c[1], profile),
file=FILE)
FILE.close()
flag.append(0)
else:
for c in curve:
if (mask60(c[1], c[0])):
flag.append(1)
else:
FILE = open('TC1_ONOFF1_SUB_1.txt', 'a')
print(
'Power error.\nElapsed time: {}\tLED power: {}\t Profile: {}'
.format(c[0], c[1], profile),
file=FILE)
FILE.close()
flag.append(0)
if (min(flag) == 1):
return True
else:
return False
def testscenario2():
rtime = random.randint(10, 30)
rhex = hex(rtime)[2:]
if (len(rhex) < 2):
rhex = '0' + rhex
set_config('01', '12', '02')
time.sleep(0.3)
set_config('01', '12', '02')
time.sleep(0.2)
panel_before = getPanel()
set_config('01', '12', '02')
time.sleep(0.2)
time.sleep(5)
set_config('01', '11', rhex)
time.sleep(rtime / 10)
panel_after = getPanel()
if (panel_after == 'invalid configuration'
or panel_before == 'invalid configuration'):
FILE = open('TC1_SETA1_SUB_2.txt', 'a')
print(
'Invalid configuration for panel.\nRandom time: {}\tPanel before: {}\tPanel after: {}\n\n'
.format(rtime, panel_before, panel_after),
file=FILE)
FILE.close()
return False
i, j = getIndex(panel_before, panel_after)
profile = switchCase2(str(panel_after))
curve = getCurve(profile)
# zero = time.time()
# future = zero + profile
# time.sleep(3)
# now = time.time()
# while(now <= future - 1):
# p = getPotLum()
# now = time.time()
# if(p == 0):
# FILE = open('TC1_SETA1_SUB_2.txt', 'a')
# FILE.write('teste falhou. led azul nao parece estar ligado\n')
# FILE.write('{}\t'.format(p))
# FILE.write('{}\t'.format(profile))
# FILE.write('{}\t'.format(rtime))
# FILE.write('{}\t'.format(panel_before))
# FILE.write('{}\n\n'.format(panel_after))
# FILE.close()
# return False
if ((j - i) == 1 or (i - j) == 3):
print("teste ok")
print(j, i)
return True
else:
FILE = open('TC1_SETA1_SUB_2.txt', 'a')
print(
'SETA activation do not provide valid transition.\nRandom time: {}\tPanel before: {}\tPanel after: {}'
.format(rtime, panel_before, panel_after),
file=FILE)
FILE.close()
return False
flag = []
if (profile == 10):
for c in curve:
if (mask10(c[1], c[0])):
flag.append(1)
else:
FILE = open('TC1_ONOFF1_SUB_2.txt', 'a')
print(
'Power error.\nElapsed time: {}\tLED power: {}\t Profile: {}'
.format(c[0], c[1], profile),
file=FILE)
FILE.close()
flag.append(0)
elif (profile == 20):
for c in curve:
if (mask20(c[1], c[0])):
flag.append(1)
else:
FILE = open('TC1_ONOFF1_SUB_2.txt', 'a')
print(
'Power error.\nElapsed time: {}\tLED power: {}\t Profile: {}'
.format(c[0], c[1], profile),
file=FILE)
FILE.close()
flag.append(0)
elif (profile == 40):
for c in curve:
if (mask40(c[1], c[0])):
flag.append(1)
else:
FILE = open('TC1_ONOFF1_SUB_2.txt', 'a')
print(
'Power error.\nElapsed time: {}\tLED power: {}\t Profile: {}'
.format(c[0], c[1], profile),
file=FILE)
FILE.close()
flag.append(0)
else:
for c in curve:
if (mask60(c[1], c[0])):
flag.append(1)
else:
FILE = open('TC1_ONOFF1_SUB_2.txt', 'a')
print(
'Power error.\nElapsed time: {}\tLED power: {}\t Profile: {}'
.format(c[0], c[1], profile),
file=FILE)
FILE.close()
flag.append(0)
if (min(flag) == 1):
return True
else:
return False