def tearDown(self):
"""
tearDown for every test
Clean up and unmount the volume
"""
# calling GlusterBaseClass tearDown
self.get_super_method(self, 'tearDown')()
# Delete the glusterfind sessions
ret, _, _ = gfind_delete(self.mnode, self.volname, self.session)
if ret:
raise ExecutionError("Failed to delete session %s" % self.session)
g.log.info("Successfully deleted session %s", self.session)
# Remove the outfile created during 'glusterfind pre and query'
ret = remove_file(self.mnode, self.outfile, force=True)
if not ret:
raise ExecutionError("Failed to remove the outfile")
g.log.info("Successfully removed the outfile")
# Cleanup the volume
ret = self.unmount_volume_and_cleanup_volume(mounts=self.mounts)
if not ret:
raise ExecutionError("Failed to Cleanup Volume")
g.log.info("Successful in Cleanup Volume")
def tearDown(self):
"""
tearDown for every test
Clean up and unmount the volume
"""
# calling GlusterBaseClass tearDown
self.get_super_method(self, 'tearDown')()
# Delete the glusterfind sessions
ret, _, _ = gfind_delete(self.mnode, self.volname, self.session)
if ret:
raise ExecutionError("Failed to delete session %s" % self.session)
g.log.info("Successfully deleted session %s", self.session)
# Remove the outfiles created during 'glusterfind pre'
for out in self.outfiles:
ret = remove_file(self.mnode, out, force=True)
if not ret:
raise ExecutionError("Failed to remove the outfile %s" % out)
g.log.info("Successfully removed the outfiles")
# Wait for the peers to be connected.
ret = wait_for_peers_to_connect(self.mnode, self.servers, 100)
if not ret:
raise ExecutionError("Peers are not in connected state.")
# Cleanup the volume
ret = self.unmount_volume_and_cleanup_volume(mounts=self.mounts)
if not ret:
raise ExecutionError("Failed to Cleanup Volume")
g.log.info("Successful in Cleanup Volume")
def tearDown(self):
"""
tearDown for every test
Clean up and unmount the volume
"""
ret, _, _ = gfind_delete(self.mnode, self.volname, self.session)
if ret != 0:
raise ExecutionError("Failed to delete session %s" % self.session)
g.log.info("Successfully deleted session %s", self.session)
g.log.info("Removing the outfiles created during 'glusterfind pre'")
for out in self.outfiles:
ret = remove_file(self.mnode, out, force=True)
if not ret:
raise ExecutionError("Failed to remove the outfile %s" % out)
g.log.info("Successfully removed the outfiles")
# Reset the volume
g.log.info("Reset the volume")
ret, _, _ = volume_reset(self.mnode, self.volname)
if ret != 0:
raise ExecutionError("Failed to reset the volume %s" %
self.volname)
g.log.info("Successfully reset the volume %s", self.volname)
# Cleanup the volume
g.log.info("Starting to Cleanup Volume")
ret = self.unmount_volume_and_cleanup_volume(mounts=self.mounts)
if not ret:
raise ExecutionError("Failed to Cleanup Volume")
g.log.info("Successful in Cleanup Volume")
# calling GlusterBaseClass tearDown
self.get_super_method(self, 'tearDown')()
def _fallocate_file(self):
"""
Perform `fallocate -l <alloc_size> <fqpath>` on <client>
"""
# Delete the files if exists (sparsefile is created on absolute sizes)
ret = remove_file(self.client, self.fqpath + '*', force=True)
self.assertTrue(
ret, 'Unable to delete existing file for `fallocate` of new file')
sleep(5)
# Create multiple sparsefiles rather than one big file
sizes = [self.alloc_size]
if self.alloc_size >= self.brick_size:
sizes = ([self.brick_size // 2] *
(self.alloc_size // self.brick_size))
sizes *= 2
sizes.append(self.alloc_size % self.brick_size)
rem_size = self.alloc_size - sum(sizes)
if rem_size:
sizes.append(rem_size)
for count, size in enumerate(sizes, start=1):
ret, _, _ = g.run(
self.client,
'fallocate -l {}G {}{}'.format(size, self.fqpath, count))
self.assertEqual(
ret, 0, 'Not able to fallocate {}* file on {}'.format(
self.fqpath, self.client))
count += 1
def tearDownClass(cls):
for each_client in cls.clients:
ret = remove_file(each_client, cls.script_upload_path)
if not ret:
raise ExecutionError("Failed to delete file {}".format(
cls.script_upload_path))
cls.get_super_method(cls, 'tearDownClass')()
def tearDown(self):
"""
tearDown for every test and Clean up and unmount the volume
"""
g.log.info("Removing the outfile created during 'glusterfind pre'")
ret = remove_file(self.mnode, self.outfile, force=True)
if not ret:
raise ExecutionError("Failed to remove the outfile")
g.log.info("Successfully removed the outfile")
# stopping the volume
g.log.info("Starting to Cleanup Volume")
ret = self.unmount_volume_and_cleanup_volume(mounts=self.mounts)
if not ret:
raise ExecutionError("Failed to Cleanup Volume")
g.log.info("Successful in Cleanup Volume")
# calling GlusterBaseClass tearDown
self.get_super_method(self, 'tearDown')()
def test_gfind_deletes(self):
"""
Verifying the glusterfind functionality with deletion of files.
* Create a volume
* Create a session on the volume
* Create various files from mount point
* Perform glusterfind pre
* Perform glusterfind post
* Check the contents of outfile
* Delete the files created from mount point
* Perform glusterfind pre
* Perform glusterfind post
* Check the contents of outfile
Files deleted must be listed
"""
# pylint: disable=too-many-statements
# Creating a session for the volume
g.log.info("Creating a session for the volume %s", self.volname)
ret, _, _ = gfind_create(self.mnode, self.volname, self.session)
self.assertEqual(ret, 0, ("Unexpected: Creation of a session for the "
"volume %s failed" % self.volname))
g.log.info("Successfully created a session for the volume %s",
self.volname)
# Perform glusterfind list to check if session exists
g.log.info("Performing glusterfind list to check if the session is "
"created")
ret, _, _ = gfind_list(self.mnode,
volname=self.volname,
sessname=self.session)
self.assertEqual(ret, 0, "Failed to list the glusterfind session")
g.log.info("Successfully listed the glusterfind session")
# Starting IO on the mounts
g.log.info("Creating Files on %s:%s", self.mounts[0].client_system,
self.mounts[0].mountpoint)
cmd = ("cd %s ; for i in `seq 1 10` ; "
"do dd if=/dev/urandom of=file$i bs=1M count=1 ; "
"done" % self.mounts[0].mountpoint)
ret, _, _ = g.run(self.mounts[0].client_system, cmd)
self.assertEqual(ret, 0, "Failed to create files on mountpoint")
g.log.info("Files created successfully on mountpoint")
# Check if the files exist
g.log.info("Checking the existence of files created during IO")
for i in range(1, 11):
ret = file_exists(self.mounts[0].client_system,
'%s/file%s' % (self.mounts[0].mountpoint, i))
self.assertTrue(ret,
"Unexpected: File 'file%s' does not exist" % i)
g.log.info("Successfully validated existence of 'file%s'", i)
sleep(5)
# Perform glusterfind pre for the session
g.log.info("Performing glusterfind pre for the session %s",
self.session)
ret, _, _ = gfind_pre(self.mnode,
self.volname,
self.session,
self.outfiles[0],
full=True,
noencode=True,
debug=True)
self.assertEqual(ret, 0, ("Failed to perform glusterfind pre"))
g.log.info("Successfully performed glusterfind pre")
# Check if the outfile exists
g.log.info("Checking if outfile created during glusterfind pre command"
" exists")
ret = file_exists(self.mnode, self.outfiles[0])
self.assertTrue(
ret, "Unexpected: File '%s' does not exist" % self.outfiles[0])
g.log.info("Successfully validated existence of '%s'",
self.outfiles[0])
# Check if all the files are listed in the outfile
for i in range(1, 11):
ret = check_if_pattern_in_file(self.mnode, 'file%s' % i,
self.outfiles[0])
self.assertEqual(ret, 0, ("File 'file%s' not listed in %s" %
(i, self.outfiles[0])))
g.log.info("File 'file%s' listed in %s", i, self.outfiles[0])
# Perform glusterfind post for the session
g.log.info("Performing glusterfind post for the session %s",
self.session)
ret, _, _ = gfind_post(self.mnode, self.volname, self.session)
self.assertEqual(ret, 0, ("Failed to perform glusterfind post"))
g.log.info("Successfully performed glusterfind post")
# Delete the files created from mount point
g.log.info("Deleting the Files on %s:%s", self.mounts[0].client_system,
self.mounts[0].mountpoint)
for i in range(1, 11):
ret = remove_file(self.mounts[0].client_system,
"%s/file%s" % (self.mounts[0].mountpoint, i),
force=True)
self.assertTrue(ret, "Failed to delete file%s" % i)
g.log.info("Successfully deleted all the files")
# Check if the files deleted exist from mount point
g.log.info("Checking the existence of files that were deleted "
"(must not be present)")
for i in range(1, 11):
ret = file_exists(self.mounts[0].client_system,
'%s/file%s' % (self.mounts[0].mountpoint, i))
self.assertFalse(
ret, "Unexpected: File 'file%s' exists even after"
" being deleted" % i)
g.log.info("Successfully validated 'file%s' does not exist", i)
sleep(5)
# Perform glusterfind pre for the session
g.log.info("Performing glusterfind pre for the session %s",
self.session)
ret, _, _ = gfind_pre(self.mnode,
self.volname,
self.session,
self.outfiles[1],
debug=True)
self.assertEqual(ret, 0, ("Failed to perform glusterfind pre"))
g.log.info("Successfully performed glusterfind pre")
# Check if the outfile exists
g.log.info("Checking if outfile created during glusterfind pre command"
" exists")
ret = file_exists(self.mnode, self.outfiles[1])
self.assertTrue(
ret, "Unexpected: File '%s' does not exist" % self.outfiles[1])
g.log.info("Successfully validated existence of '%s'",
self.outfiles[1])
# Check if all the files are listed in the outfile
for i in range(1, 11):
pattern = "DELETE file%s" % i
ret = check_if_pattern_in_file(self.mnode, pattern,
self.outfiles[1])
self.assertEqual(ret, 0, ("File 'file%s' not listed in %s" %
(i, self.outfiles[1])))
g.log.info("File 'file%s' listed in %s", i, self.outfiles[1])
