def drawpolycone_worker(params):
"""
Draw a polycone. Receive parameters through a sequence so that this
function and its parameters can be passed to another function for
deferment. Right now this is only ColorSorter.schedule (see below)
"""
(pos_array, rad_array) = params
glePolyCone(pos_array, None, rad_array)
return
def drawpolycone_worker(params):
"""
Draw a polycone. Receive parameters through a sequence so that this
function and its parameters can be passed to another function for
deferment. Right now this is only ColorSorter.schedule (see below)
"""
(pos_array, rad_array) = params
glePolyCone(pos_array, None, rad_array)
return
def drawpolycone_multicolor_worker(params):
"""
Draw a polycone. Receive parameters through a sequence so that this
function and its parameters can be passed to another function for
deferment. Right now this is only ColorSorter.schedule (see below)
piotr 080311: this variant accepts a color array as an additional parameter
"""
(pos_array, color_array, rad_array) = params
glEnable(GL_COLOR_MATERIAL) # have to enable GL_COLOR_MATERIAL for
# the GLE function
glPushAttrib(GL_CURRENT_BIT) # store current attributes in case glePolyCone
# modifies the (e.g. current color)
# piotr 080411
glePolyCone(pos_array, color_array, rad_array)
glPopAttrib() # This fixes the 'disappearing cylinder' bug
# glPopAttrib doesn't take any arguments
# piotr 080415
glDisable(GL_COLOR_MATERIAL)
return
def drawpolycone_multicolor_worker(params):
"""
Draw a polycone. Receive parameters through a sequence so that this
function and its parameters can be passed to another function for
deferment. Right now this is only ColorSorter.schedule (see below)
piotr 080311: this variant accepts a color array as an additional parameter
"""
(pos_array, color_array, rad_array) = params
glEnable(GL_COLOR_MATERIAL) # have to enable GL_COLOR_MATERIAL for
# the GLE function
glPushAttrib(
GL_CURRENT_BIT) # store current attributes in case glePolyCone
# modifies the (e.g. current color)
# piotr 080411
glePolyCone(pos_array, color_array, rad_array)
glPopAttrib() # This fixes the 'disappearing cylinder' bug
# glPopAttrib doesn't take any arguments
# piotr 080415
glDisable(GL_COLOR_MATERIAL)
return
def drawOriginAsSmallAxis(scale, origin, dashEnabled = False):
"""
Draws a small wireframe version of the origin. It is rendered as a
3D point at (0, 0, 0) with 3 small axes extending from it in the positive
X, Y, Z directions.
@see: drawaxes (related code)
"""
#Perhaps we should split this method into smaller methods? ninad060920
#Notes:
#1. drawing arrowheads implemented on 060918
#2. ninad060921 Show the origin axes as dotted if behind the mode.
#3. ninad060922 The arrow heads are drawn as wireframe cones if behind the
# object the arrowhead size is slightly smaller (otherwise some portion of
# the the wireframe arrow shows up!
#4 .Making origin non-zoomable is acheived by replacing hardcoded 'n' with
# glpane's scale - ninad060922
#ninad060922 in future , the following could be user preferences.
if (dashEnabled):
dashShrinkage = 0.9
else:
dashShrinkage=1
x1, y1, z1 = scale * 0.01, scale * 0.01, scale * 0.01
xEnd, yEnd, zEnd = scale * 0.04, scale * 0.09, scale * 0.025
arrowBase = scale * 0.0075 * dashShrinkage
arrowHeight = scale * 0.035 * dashShrinkage
lineWidth = 1.0
glPushMatrix()
glTranslate(origin[0], origin[1], origin[2])
glDisable(GL_LIGHTING)
glLineWidth(lineWidth)
gleNumSides = gleGetNumSides()
#Code to show hidden lines of the origin if some model obscures it
# ninad060921
if dashEnabled:
glLineStipple(2, 0xAAAA)
glEnable(GL_LINE_STIPPLE)
glDisable(GL_DEPTH_TEST)
glPolygonMode(GL_FRONT_AND_BACK, GL_LINE)
gleSetNumSides(5)
else:
gleSetNumSides(10)
glBegin(GL_LINES)
color = env.prefs[originAxisColor_prefs_key]
glColor3fv(color)
#start draw a point at origin .
#ninad060922 is thinking about using GL_POINTS here
glVertex(-x1, 0.0, 0.0)
glVertex( x1, 0.0, 0.0)
glVertex(0.0, -y1, 0.0)
glVertex(0.0, y1, 0.0)
glVertex(-x1, y1, z1)
glVertex( x1, -y1, -z1)
glVertex(x1, y1, z1)
glVertex(-x1, -y1, -z1)
glVertex(x1, y1, -z1)
glVertex(-x1, -y1, z1)
glVertex(-x1, y1, -z1)
glVertex(x1, -y1, z1)
#end draw a point at origin
#start draw small origin axes
glColor3fv(color)
glVertex(xEnd, 0.0, 0.0)
glVertex( 0.0, 0.0, 0.0)
glColor3fv(color)
glVertex(0.0, yEnd, 0.0)
glVertex(0.0, 0.0, 0.0)
glColor3fv(color)
glVertex(0.0, 0.0, zEnd)
glVertex(0.0, 0.0, 0.0)
glEnd() #end draw lines
glLineWidth(1.0)
# End push matrix for drawing various lines in the origin and axes.
glPopMatrix()
#start draw solid arrow heads for X , Y and Z axes
glPushMatrix()
glDisable(GL_CULL_FACE)
glColor3fv(color)
glTranslatef(xEnd, 0.0, 0.0)
glRotatef(90, 0.0, 1.0, 0.0)
glePolyCone([[0, 0, -1],
[0, 0, 0],
[0, 0, arrowHeight],
[0, 0, arrowHeight+1]],
None,
[arrowBase, arrowBase, 0, 0])
glPopMatrix()
glPushMatrix()
glColor3fv(color)
glTranslatef(0.0, yEnd, 0.0)
glRotatef(-90, 1.0, 0.0, 0.0)
glePolyCone([[0, 0, -1],
[0, 0, 0],
[0, 0, arrowHeight],
[0, 0, arrowHeight+1]],
None,
[arrowBase, arrowBase, 0, 0])
glPopMatrix()
glPushMatrix()
glColor3fv(color)
glTranslatef(0.0,0.0,zEnd)
glePolyCone([[0, 0, -1],
[0, 0, 0],
[0, 0, arrowHeight],
[0, 0, arrowHeight+1]],
None,
[arrowBase, arrowBase, 0, 0])
#Disable line stipple and Enable Depth test
if dashEnabled:
glLineStipple(1, 0xAAAA)
glDisable(GL_LINE_STIPPLE)
glEnable(GL_DEPTH_TEST)
glPolygonMode(GL_FRONT_AND_BACK, GL_FILL)
gleSetNumSides(gleNumSides)
glEnable(GL_CULL_FACE)
glEnable(GL_LIGHTING)
glPopMatrix()
#end draw solid arrow heads for X , Y and Z axes
return
def drawOriginAsSmallAxis(scale, origin, dashEnabled=False):
"""
Draws a small wireframe version of the origin. It is rendered as a
3D point at (0, 0, 0) with 3 small axes extending from it in the positive
X, Y, Z directions.
@see: drawaxes (related code)
"""
#Perhaps we should split this method into smaller methods? ninad060920
#Notes:
#1. drawing arrowheads implemented on 060918
#2. ninad060921 Show the origin axes as dotted if behind the mode.
#3. ninad060922 The arrow heads are drawn as wireframe cones if behind the
# object the arrowhead size is slightly smaller (otherwise some portion of
# the the wireframe arrow shows up!
#4 .Making origin non-zoomable is acheived by replacing hardcoded 'n' with
# glpane's scale - ninad060922
#ninad060922 in future , the following could be user preferences.
if (dashEnabled):
dashShrinkage = 0.9
else:
dashShrinkage = 1
x1, y1, z1 = scale * 0.01, scale * 0.01, scale * 0.01
xEnd, yEnd, zEnd = scale * 0.04, scale * 0.09, scale * 0.025
arrowBase = scale * 0.0075 * dashShrinkage
arrowHeight = scale * 0.035 * dashShrinkage
lineWidth = 1.0
glPushMatrix()
glTranslate(origin[0], origin[1], origin[2])
glDisable(GL_LIGHTING)
glLineWidth(lineWidth)
gleNumSides = gleGetNumSides()
#Code to show hidden lines of the origin if some model obscures it
# ninad060921
if dashEnabled:
glLineStipple(2, 0xAAAA)
glEnable(GL_LINE_STIPPLE)
glDisable(GL_DEPTH_TEST)
glPolygonMode(GL_FRONT_AND_BACK, GL_LINE)
gleSetNumSides(5)
else:
gleSetNumSides(10)
glBegin(GL_LINES)
color = env.prefs[originAxisColor_prefs_key]
glColor3fv(color)
#start draw a point at origin .
#ninad060922 is thinking about using GL_POINTS here
glVertex(-x1, 0.0, 0.0)
glVertex(x1, 0.0, 0.0)
glVertex(0.0, -y1, 0.0)
glVertex(0.0, y1, 0.0)
glVertex(-x1, y1, z1)
glVertex(x1, -y1, -z1)
glVertex(x1, y1, z1)
glVertex(-x1, -y1, -z1)
glVertex(x1, y1, -z1)
glVertex(-x1, -y1, z1)
glVertex(-x1, y1, -z1)
glVertex(x1, -y1, z1)
#end draw a point at origin
#start draw small origin axes
glColor3fv(color)
glVertex(xEnd, 0.0, 0.0)
glVertex(0.0, 0.0, 0.0)
glColor3fv(color)
glVertex(0.0, yEnd, 0.0)
glVertex(0.0, 0.0, 0.0)
glColor3fv(color)
glVertex(0.0, 0.0, zEnd)
glVertex(0.0, 0.0, 0.0)
glEnd() #end draw lines
glLineWidth(1.0)
# End push matrix for drawing various lines in the origin and axes.
glPopMatrix()
#start draw solid arrow heads for X , Y and Z axes
glPushMatrix()
glDisable(GL_CULL_FACE)
glColor3fv(color)
glTranslatef(xEnd, 0.0, 0.0)
glRotatef(90, 0.0, 1.0, 0.0)
glePolyCone(
[[0, 0, -1], [0, 0, 0], [0, 0, arrowHeight], [0, 0, arrowHeight + 1]],
None, [arrowBase, arrowBase, 0, 0])
glPopMatrix()
glPushMatrix()
glColor3fv(color)
glTranslatef(0.0, yEnd, 0.0)
glRotatef(-90, 1.0, 0.0, 0.0)
glePolyCone(
[[0, 0, -1], [0, 0, 0], [0, 0, arrowHeight], [0, 0, arrowHeight + 1]],
None, [arrowBase, arrowBase, 0, 0])
glPopMatrix()
glPushMatrix()
glColor3fv(color)
glTranslatef(0.0, 0.0, zEnd)
glePolyCone(
[[0, 0, -1], [0, 0, 0], [0, 0, arrowHeight], [0, 0, arrowHeight + 1]],
None, [arrowBase, arrowBase, 0, 0])
#Disable line stipple and Enable Depth test
if dashEnabled:
glLineStipple(1, 0xAAAA)
glDisable(GL_LINE_STIPPLE)
glEnable(GL_DEPTH_TEST)
glPolygonMode(GL_FRONT_AND_BACK, GL_FILL)
gleSetNumSides(gleNumSides)
glEnable(GL_CULL_FACE)
glEnable(GL_LIGHTING)
glPopMatrix()
#end draw solid arrow heads for X , Y and Z axes
return
