def decode_raw(self, track):
raw = RawTrack(clock=2e-6, data=track)
bits, _ = raw.get_all_data()
for offs in bits.itersearch(sync):
if self.nr_missing() == 0:
break
sec = bits[offs:offs + 544 * 16].tobytes()
if len(sec) != 1088:
continue
header = decode(sec[4:12])
format, track, sec_id, togo = tuple(header)
if format != 0xff or track != self.tracknr \
or not(sec_id < self.nsec and 0 < togo <= self.nsec) \
or self.exists(sec_id, togo):
continue
label = decode(sec[12:44])
hsum, = struct.unpack('>I', decode(sec[44:52]))
if hsum != checksum(header + label):
continue
dsum, = struct.unpack('>I', decode(sec[52:60]))
data = decode(sec[60:1084])
gap = decode(sec[1084:1088])
if dsum != checksum(data):
continue
self.add(sec_id, togo, label, data)
def emit_track(self, cyl, side, track):
flux = track.flux()
flux.cue_at_index()
raw = RawTrack(clock=5e-4 / self.bitrate, data=flux)
bits, _ = raw.get_revolution(0)
bits.bytereverse()
self.to_track[cyl, side] = (len(bits), bits.tobytes())
def verify_track(self, flux):
flux.cue_at_index()
raw = RawTrack(time_per_rev=self.time_per_rev,
clock=self.time_per_rev / len(self.bits),
data=flux)
bits, _ = raw.get_all_data()
weak_iter = it.chain(self.weak, [(self.verify_len + 1, 1)])
weak = next(weak_iter)
# Start checking from the IAM sync
dump_start = self._find_sync(bits, mfm.iam_sync, 0)
self_start = self._find_sync(self.bits, mfm.iam_sync, 0)
# Include the IAM pre-sync header
if dump_start is None:
return False
dump_start -= self.gap_presync * 16
self_start -= self.gap_presync * 16
while self_start is not None and dump_start is not None:
# Find the weak areas immediately before and after the current
# region to be checked.
s, n = None, None
while self_start > weak[0]:
s, n = weak
weak = next(weak_iter)
# If there is a weak area preceding us, move the start point to
# immediately follow the weak area.
if s is not None:
delta = self_start - (s + n + 16)
self_start -= delta
dump_start -= delta
# Truncate the region at the next weak area, or the last sector.
self_end = max(self_start, min(weak[0], self.verify_len + 1))
dump_end = dump_start + self_end - self_start
# Extract the corresponding areas from the pristine track and
# from the dump, and check that they match.
if bits[dump_start:dump_end] != self.bits[self_start:self_end]:
return False
# Find the next A1A1A1 sync pattern
dump_start = self._find_sync(bits, mfm.sync, dump_end)
self_start = self._find_sync(self.bits, mfm.sync, self_end)
# Did we verify all regions in the pristine track?
return self_start is None
def verify_track(self, flux):
flux.cue_at_index()
raw = RawTrack(clock=self.time_per_rev / len(self.bits), data=flux)
raw_bits, _ = raw.get_all_data()
for s, l in IPFTrack.strong_data(self.sectors, self.weak):
sector = self.bits[s:s + l]
# Search within an area +/- the pre-defined # bitcells tolerance
raw_area = raw_bits[max(self.splice + s -
self.tolerance, 0):self.splice + s + l +
self.tolerance]
# All we care about is at least one match (this is a bit fuzzy)
if next(raw_area.itersearch(sector), None) is None:
return False
return True
def emit_track(self, cyl, side, track):
if self.opts.bitrate is None:
t = track.raw_track() if hasattr(track, 'raw_track') else track
b = getattr(t, 'bitrate', None)
error.check(
hasattr(t, 'bitrate'), 'HFE: Requires bitrate to be specified'
' (eg. filename.hfe::bitrate=500)')
self.opts.bitrate = round(t.bitrate / 2e3)
print('HFE: Data bitrate detected: %d kbit/s' % self.opts.bitrate)
flux = track.flux()
flux.cue_at_index()
raw = RawTrack(clock=5e-4 / self.opts.bitrate, data=flux)
bits, _ = raw.get_revolution(0)
bits.bytereverse()
self.to_track[cyl, side] = (len(bits), bits.tobytes())
def decode_raw(self, track):
track.cue_at_index()
raw = RawTrack(clock = 1e-6, data = track)
bits, _ = raw.get_all_data()
areas = []
idam = None
## 1. Calculate offsets within dump
for offs in bits.itersearch(iam_sync):
mark = decode(bits[offs+3*16:offs+4*16].tobytes())[0]
if mark == IBM_MFM.IAM:
areas.append(IAM(offs, offs+4*16))
self.has_iam = True
for offs in bits.itersearch(sync):
mark = decode(bits[offs+3*16:offs+4*16].tobytes())[0]
if mark == IBM_MFM.IDAM:
s, e = offs, offs+10*16
b = decode(bits[s:e].tobytes())
c,h,r,n = struct.unpack(">4x4B2x", b)
crc = crc16.new(b).crcValue
if idam is not None:
areas.append(idam)
idam = IDAM(s, e, crc, c=c, h=h, r=r, n=n)
elif mark == IBM_MFM.DAM or mark == IBM_MFM.DDAM:
if idam is None or idam.end - offs > 1000:
areas.append(DAM(offs, offs+4*16, 0xffff, mark=mark))
else:
sz = 128 << idam.n
s, e = offs, offs+(4+sz+2)*16
b = decode(bits[s:e].tobytes())
crc = crc16.new(b).crcValue
dam = DAM(s, e, crc, mark=mark, data=b[4:-2])
areas.append(Sector(idam, dam))
idam = None
else:
print("Unknown mark %02x" % mark)
if idam is not None:
areas.append(idam)
# Convert to offsets within track
areas.sort(key=lambda x:x.start)
index = iter(raw.revolutions)
p, n = 0, next(index)
for a in areas:
if a.start >= n:
p = n
try:
n = next(index)
except StopIteration:
n = float('inf')
a.delta(p)
areas.sort(key=lambda x:x.start)
# Add to the deduped lists
for a in areas:
match = False
if isinstance(a, IAM):
list = self.iams
elif isinstance(a, Sector):
list = self.sectors
else:
continue
for s in list:
if abs(s.start - a.start) < 1000:
match = True
break
if match and list == self.sectors and s.crc != 0 and a.crc == 0:
self.sectors = [x for x in self.sectors if x != a]
match = False
if not match:
list.append(a)
def emit_track(self, cyl, side, track):
raw = RawTrack(clock=5e-4 / self.bitrate, data=track)
bits, _ = raw.get_revolution(0)
bits.bytereverse()
self.to_track[cyl, side] = (len(bits), bits.tobytes())
def append_track(self, track):
raw = RawTrack(clock=5e-4 / self.bitrate, data=track)
bits, _ = raw.get_revolution(0)
bits.bytereverse()
self.track_list.append((len(bits), bits.tobytes()))
