def __init__(self, sa, sacm, lo, parent=None):
QMainWindow.__init__(self, parent)
self.setupUi(self)
#instruments
self.sa = sa
self.sacm = sacm
self.lo = lo
self.lo.set_output(False)
self.lo.set_power(self.sa.lo_power)
#reading over time plot
self.curvewidget.add_toolbar(self.addToolBar("Curve"))
self.curvewidget.register_all_image_tools()
self.plot = self.curvewidget.plot
self.plot.set_titles(title="Power vs. Time",
xlabel="Time (s)",
ylabel="Power")
self.ch1_plot = make.mcurve(np.array([]),
np.array([]),
label='Magnitude') #Make Ch1 curve
self.plot.add_item(self.ch1_plot)
self.data = []
self.tl = []
self.t0 = time.time()
self.first_update = True
#spectrum plot
self.spec_plot = self.spectrumCurvewidget.plot
self.spectrumCurvewidget.register_all_image_tools()
self.spec_plot.set_titles(title='Power vs. Frequency',
xlabel='Frequency (GHz)',
ylabel='Power')
self.spectrum = make.mcurve(np.array([]), np.array([]))
self.spec_plot.add_item(self.spectrum)
self.spec = []
self.fd = []
self.sweeping = [False, False]
self.sweep_end = self.endSweepSpinBox.value()
#register UI listeners
self.ctimer = QTimer(
) #Setup autoupdating timer to call update_plots at 10Hz
self.ctimer.timeout.connect(self.update_ui)
self.ctimer.start(100)
self.dBmLabel.hide()
self.calibratedOuputCheckBox.clicked.connect(
self.cali_output_checkbox_clicked)
self.updateRateSpinBox.setValue(10.0)
self.updateRateSpinBox.editingFinished.connect(
self.update_rate_changed)
self.frequencySpinBox.editingFinished.connect(self.frequency_changed)
self.endSweepSpinBox.editingFinished.connect(self.end_changed)
self.clearButton.clicked.connect(self.clear_plot)
self.sweepButton.clicked.connect(self.sweep)
self.frequency_changed()
def init_plots(self):
self.plots["plot"] = self.curvewidget.plot
self.curvewidget.add_toolbar(self.toolBar)
self.curvewidget.register_all_curve_tools()
x = np.linspace(-5,5,1000)
y1 = np.cos(x)
y2 = np.sin(x)
self.plots["ch1"] = make.mcurve(x, y1, label="Ch1")
self.plots["plot"].add_item(self.plots["ch1"])
self.plots["ch2"] = make.mcurve(x, y2, label="Ch2")
self.plots["plot"].add_item(self.plots["ch2"])
def __init__(self, sa, sacm, lo, parent = None):
QMainWindow.__init__(self, parent)
self.setupUi(self)
#instruments
self.sa = sa
self.sacm = sacm
self.lo = lo
self.lo.set_output(False)
self.lo.set_power(self.sa.lo_power)
#reading over time plot
self.curvewidget.add_toolbar(self.addToolBar("Curve"))
self.curvewidget.register_all_image_tools()
self.plot = self.curvewidget.plot
self.plot.set_titles(title="Power vs. Time", xlabel="Time (s)", ylabel="Power")
self.ch1_plot = make.mcurve(np.array([]),np.array([]),label='Magnitude') #Make Ch1 curve
self.plot.add_item(self.ch1_plot)
self.data=[]
self.tl = []
self.t0 = time.time()
self.first_update = True
#spectrum plot
self.spec_plot = self.spectrumCurvewidget.plot
self.spectrumCurvewidget.register_all_image_tools()
self.spec_plot.set_titles(title='Power vs. Frequency', xlabel='Frequency (GHz)', ylabel='Power')
self.spectrum = make.mcurve(np.array([]), np.array([]))
self.spec_plot.add_item(self.spectrum)
self.spec = []
self.fd = []
self.sweeping = [False, False]
self.sweep_end = self.endSweepSpinBox.value()
#register UI listeners
self.ctimer = QTimer() #Setup autoupdating timer to call update_plots at 10Hz
self.ctimer.timeout.connect(self.update_ui)
self.ctimer.start(100)
self.dBmLabel.hide()
self.calibratedOuputCheckBox.clicked.connect(self.cali_output_checkbox_clicked)
self.updateRateSpinBox.setValue(10.0)
self.updateRateSpinBox.editingFinished.connect(self.update_rate_changed)
self.frequencySpinBox.editingFinished.connect(self.frequency_changed)
self.endSweepSpinBox.editingFinished.connect(self.end_changed)
self.clearButton.clicked.connect(self.clear_plot)
self.sweepButton.clicked.connect(self.sweep)
self.frequency_changed()
def update_nwa_plots(self, xlabel="", ylabel=""):
if self.x is None or self.y is None: return
if not self.nwaplotsInitialized:
self.nwaplotsInitialized = True
self.nwa_curve = make.mcurve(self.x, self.y, label='Magnitude')
self.nwaplot.add_item(self.nwa_curve)
self.nwaplot.set_titles(title="", xlabel=xlabel, ylabel=ylabel)
self.update_lineplot(self.nwaplot, self.nwa_curve, (self.x, self.y))
def update_nwa_plots(self, xlabel="", ylabel=""):
if self.x is None or self.y is None: return
if not self.nwaplotsInitialized:
self.nwaplotsInitialized=True
self.nwa_curve = make.mcurve(self.x, self.y, label='Magnitude')
self.nwaplot.add_item(self.nwa_curve)
self.nwaplot.set_titles(title="", xlabel=xlabel, ylabel=ylabel)
self.update_lineplot(self.nwaplot , self.nwa_curve, (self.x, self.y))
def plotyy(x1, y1, x2, y2):
"""
Plot curves with two different y axes
Example:
import numpy as np
x = np.linspace(-5, 5, 1000)
plotyy(x, np.sin(x), x, np.cos(x))
ylabel("sinus", "cosinus")
show()
"""
axe = gca()
curve1 = make.mcurve(x1, y1, yaxis='left')
curve2 = make.mcurve(x2, y2, yaxis='right')
axe.ycolor = (curve1.curveparam.line.color, curve2.curveparam.line.color)
axe.add_plot(curve1)
axe.add_plot(curve2)
_show_if_interactive()
return [curve1, curve2]
def plotyy(x1, y1, x2, y2):
"""
Plot curves with two different y axes
Example:
import numpy as np
x = np.linspace(-5, 5, 1000)
plotyy(x, np.sin(x), x, np.cos(x))
ylabel("sinus", "cosinus")
show()
"""
axe = gca()
curve1 = make.mcurve(x1, y1, yaxis='left')
curve2 = make.mcurve(x2, y2, yaxis='right')
axe.ycolor = (curve1.curveparam.line.color, curve2.curveparam.line.color)
axe.add_plot(curve1)
axe.add_plot(curve2)
_show_if_interactive()
return [curve1, curve2]
def setup_plot(self, title, xlabel, ylabel):
# self.curvewidget = CurveWidget()
# self.setCentralWidget(self.curvewidget)
self.curvewidget.add_toolbar(self.addToolBar("Curve"))
self.curvewidget.register_all_image_tools()
self.plot = self.curvewidget.plot
x = np.linspace(-5, 5, 1000) #Create some sample curves
y1 = np.cos(x)
self.plot_item = make.mcurve(x, y1, label='Magnitude') #Make Ch1 curve
self.plot.add_item(self.plot_item)
self.plot.set_titles(title=title, xlabel=xlabel, ylabel=ylabel)
def setup_plot(self, title, xlabel, ylabel):
# self.curvewidget = CurveWidget()
# self.setCentralWidget(self.curvewidget)
self.curvewidget.add_toolbar(self.addToolBar("Curve"))
self.curvewidget.register_all_image_tools()
self.plot = self.curvewidget.plot
x=np.linspace(-5,5,1000) #Create some sample curves
y1=np.cos(x)
self.plot_item = make.mcurve(x, y1,label='Magnitude') #Make Ch1 curve
self.plot.add_item(self.plot_item)
self.plot.set_titles(title=title, xlabel=xlabel, ylabel=ylabel)
def get_point( *args ):
"""
Plot curves and return selected point(s) coordinates
"""
win = CurveDialog(_("Select one point then press OK to accept"), edit=True)
default = win.add_tool(SelectPointTool, title="Test", on_active_item=True,
mode="create", end_callback=test_function)
default.activate()
plot = win.get_plot()
for cx, cy in args:
item = make.mcurve(cx, cy)
plot.add_item(item)
plot.set_active_item(item)
win.show()
if win.exec_():
return default.get_coordinates()
def semilogy(*args, **kwargs):
"""
Plot curves with logarithmic y-axis scale
Example:
import numpy as np
x = np.linspace(-5, 5, 1000)
semilogy(x, np.sin(12*x), "g-")
show()
"""
axe = gca()
axe.yscale = 'log'
curve = make.mcurve(*args, **kwargs)
axe.add_plot(curve)
_show_if_interactive()
return [curve]
def semilogy(*args, **kwargs):
"""
Plot curves with logarithmic y-axis scale
Example:
import numpy as np
x = np.linspace(-5, 5, 1000)
semilogy(x, np.sin(12*x), "g-")
show()
"""
axe = gca()
axe.yscale = 'log'
curve = make.mcurve(*args, **kwargs)
axe.add_plot(curve)
_show_if_interactive()
return [curve]
def loglog(*args, **kwargs):
"""
Plot curves with logarithmic x-axis and y-axis scales
Example::
import numpy as np
x = np.linspace(-5, 5, 1000)
loglog(x, np.sin(12*x), "g-")
show()
"""
axe = gca()
axe.xscale = "log"
axe.yscale = "log"
curve = make.mcurve(*args, **kwargs)
axe.add_plot(curve)
_show_if_interactive()
return [curve]
def get_point(*args):
"""
Plot curves and return selected point(s) coordinates
"""
win = CurveDialog(_("Select one point then press OK to accept"), edit=True)
default = win.add_tool(SelectPointTool,
title="Test",
on_active_item=True,
mode="create",
end_callback=test_function)
default.activate()
plot = win.get_plot()
for cx, cy in args:
item = make.mcurve(cx, cy)
plot.add_item(item)
plot.set_active_item(item)
win.show()
if win.exec_():
return default.get_coordinates()
def plot(*args, **kwargs):
"""
Plot curves
Example:
import numpy as np
x = np.linspace(-5, 5, 1000)
plot(x, np.sin(x), "r+")
plot(x, np.cos(x), "g-")
show()
"""
axe = gca()
curves = make.mcurve(*args, **kwargs)
if not isinstance(curves, list):
curves = [curves]
for curve in curves:
axe.add_plot(curve)
_show_if_interactive()
return curves
def plot(*args, **kwargs):
"""
Plot curves
Example:
import numpy as np
x = np.linspace(-5, 5, 1000)
plot(x, np.sin(x), "r+")
plot(x, np.cos(x), "g-")
show()
"""
axe = gca()
curves = make.mcurve(*args, **kwargs)
if not isinstance(curves, list):
curves = [curves]
for curve in curves:
axe.add_plot(curve)
_show_if_interactive()
return curves
def __init__(self):
SlabWindow.__init__(self, nwa_DataThread, config_file=None)
self.setupSlabWindow()
self.register_script("run_script", self.go_button, self.abort_button)
self.start_thread()
#Connect controls
self.connect(self.powerSpinBox, SIGNAL("valueChanged(double)"),
lambda i: self.set_param("power", i))
self.connect(self.sweep_ptsSpinBox, SIGNAL("valueChanged(int)"),
lambda i: self.set_param("sweep_pts", i))
self.connect(self.ifbwSpinBox, SIGNAL("valueChanged(double)"),
lambda i: self.set_param("ifbw", i))
self.connect(self.avgsSpinBox, SIGNAL("valueChanged(int)"),
lambda i: self.set_param("avgs", i))
self.connect(self.centerstartSpinBox, SIGNAL("valueChanged(double)"),
lambda i: self.set_param("centerstart", i))
self.connect(self.spanstopSpinBox, SIGNAL("valueChanged(double)"),
lambda i: self.set_param("spanstop", i))
self.connect(self.centerspanstartstopCheckBox, SIGNAL("stateChanged(double)"),
lambda i: self.set_param("centerspanstartstop", i))
self.connect(self.saveCheckBox, SIGNAL("stateChanged(int)"),
lambda i: self.set_param("save", i))
self.connect(self.centerspanstartstopCheckBox, SIGNAL("stateChanged(int)"),self.on_centerspanstartstopChanged)
self.connect(self.autoCheckBox, SIGNAL("stateChanged(int)"),
lambda i: self.set_param("auto", i))
self.connect(self.traceNumSpinBox, SIGNAL("valueChanged(int)"),
lambda i: self.set_param("tracenum", i))
self.exptpath='S:\\_Data\\'
self.exptpathButton.clicked.connect(self.selectexptpath)
self.exptpathLineEdit.textChanged.connect(self.update_filenumber)
self.prefixLineEdit.textChanged.connect(self.update_filenumber)
#Initialize Parameters
self.set_param("power", -20)
self.set_param("sweep_pts",1601)
self.set_param("ifbw",1e3)
self.set_param("avgs",1)
self.set_param("centerstart",10.)
self.set_param("spanstop",1000.)
self.set_param("centerspanstartstop",1)
self.set_param("save",0)
self.set_param("exptpath",self.exptpath)
self.set_param("prefix",'trace')
self.set_param("filenumber",0)
self.set_param("delay",0)
self.set_param("tracenum",0)
self.set_param("auto",True)
#Proxy widgets into datathread
self.plot_manager['tracenum']=self.traceNumSpinBox
self.plot_manager['temperatureLabel']=self.temperatureLabel
#Make some default data
self.freqs=np.linspace(self.params['centerstart']-self.params['spanstop']/2.,self.params['centerstart']+self.params['spanstop']/2.,self.params['sweep_pts'])
self.mags=np.zeros(len(self.freqs))
self.phases=np.zeros(len(self.freqs))
#Initialize Plots
self.plot_manager["dataplot"] = self.dataCurveWidget.plot
self.dataCurveWidget.add_toolbar(self.addToolBar("Curve"))
self.dataCurveWidget.register_all_image_tools()
self.plot_manager["dataplot"].set_titles(title="Data Curve", xlabel="Frequency (GHz)", ylabel="S21")
self.plot_manager["datacurve"] = make.mcurve(self.freqs, self.mags,label='Magnitude') #Make Ch1 curve
self.plot_manager["dataplot"].add_item(self.plot_manager["datacurve"])
def __init__(self):
SlabWindow.__init__(self, nwa_DataThread, config_file=None)
self.setupSlabWindow()
self.register_script("run_script", self.go_button, self.abort_button)
self.start_thread()
#Connect controls
self.connect(self.powerSpinBox, SIGNAL("valueChanged(double)"),
lambda i: self.set_param("power", i))
self.connect(self.sweep_ptsSpinBox, SIGNAL("valueChanged(int)"),
lambda i: self.set_param("sweep_pts", i))
self.connect(self.ifbwSpinBox, SIGNAL("valueChanged(double)"),
lambda i: self.set_param("ifbw", i))
self.connect(self.avgsSpinBox, SIGNAL("valueChanged(int)"),
lambda i: self.set_param("avgs", i))
self.connect(self.centerstartSpinBox, SIGNAL("valueChanged(double)"),
lambda i: self.set_param("centerstart", i))
self.connect(self.spanstopSpinBox, SIGNAL("valueChanged(double)"),
lambda i: self.set_param("spanstop", i))
self.connect(self.centerspanstartstopCheckBox,
SIGNAL("stateChanged(double)"),
lambda i: self.set_param("centerspanstartstop", i))
self.connect(self.saveCheckBox, SIGNAL("stateChanged(int)"),
lambda i: self.set_param("save", i))
self.connect(self.centerspanstartstopCheckBox,
SIGNAL("stateChanged(int)"),
self.on_centerspanstartstopChanged)
self.connect(self.autoCheckBox, SIGNAL("stateChanged(int)"),
lambda i: self.set_param("auto", i))
self.connect(self.traceNumSpinBox, SIGNAL("valueChanged(int)"),
lambda i: self.set_param("tracenum", i))
self.exptpath = 'S:\\_Data\\'
self.exptpathButton.clicked.connect(self.selectexptpath)
self.exptpathLineEdit.textChanged.connect(self.update_filenumber)
self.prefixLineEdit.textChanged.connect(self.update_filenumber)
#Initialize Parameters
self.set_param("power", -20)
self.set_param("sweep_pts", 1601)
self.set_param("ifbw", 1e3)
self.set_param("avgs", 1)
self.set_param("centerstart", 10.)
self.set_param("spanstop", 1000.)
self.set_param("centerspanstartstop", 1)
self.set_param("save", 0)
self.set_param("exptpath", self.exptpath)
self.set_param("prefix", 'trace')
self.set_param("filenumber", 0)
self.set_param("delay", 0)
self.set_param("tracenum", 0)
self.set_param("auto", True)
#Proxy widgets into datathread
self.plot_manager['tracenum'] = self.traceNumSpinBox
self.plot_manager['temperatureLabel'] = self.temperatureLabel
#Make some default data
self.freqs = np.linspace(
self.params['centerstart'] - self.params['spanstop'] / 2.,
self.params['centerstart'] + self.params['spanstop'] / 2.,
self.params['sweep_pts'])
self.mags = np.zeros(len(self.freqs))
self.phases = np.zeros(len(self.freqs))
#Initialize Plots
self.plot_manager["dataplot"] = self.dataCurveWidget.plot
self.dataCurveWidget.add_toolbar(self.addToolBar("Curve"))
self.dataCurveWidget.register_all_image_tools()
self.plot_manager["dataplot"].set_titles(title="Data Curve",
xlabel="Frequency (GHz)",
ylabel="S21")
self.plot_manager["datacurve"] = make.mcurve(
self.freqs, self.mags, label='Magnitude') #Make Ch1 curve
self.plot_manager["dataplot"].add_item(self.plot_manager["datacurve"])