def main(write_output=True, allow_features=None, flux_type_arg=1,
bdry_flux_type_arg=None, extra_discr_args={}):
from math import sqrt, pi
from hedge.models.em import TEMaxwellOperator
from hedge.backends import guess_run_context
rcon = guess_run_context(allow_features)
epsilon0 = 8.8541878176e-12 # C**2 / (N m**2)
mu0 = 4*pi*1e-7 # N/A**2.
c = 1/sqrt(mu0*epsilon0)
materials = {"vacuum" : (epsilon0, mu0),
"dielectric" : (2*epsilon0, mu0)}
output_dir = "2d_cavity"
import os
if not os.access(output_dir, os.F_OK):
os.makedirs(output_dir)
# should no tag raise an error or default to free space?
def eps_val(x, el):
for key in materials.keys():
if el in material_elements[key]:
return materials[key][0]
raise ValueError, "Element does not belong to any material"
def mu_val(x, el):
for key in materials.keys():
if el in material_elements[key]:
return materials[key][1]
raise ValueError, "Element does not belong to any material"
# geometry of cavity
d = 100e-3
a = 150e-3
# analytical frequency and transverse wavenumbers of resonance
f0 = 9.0335649907522321e8
h = 2*pi*f0/c
l = -h*sqrt(2)
# substitute the following and change materials for a homogeneous cavity
#h = pi/a
#l =-h
def initial_val(discr):
# the initial solution for the TE_10-like mode
def initial_Hz(x, el):
from math import cos, sin
if el in material_elements["vacuum"]:
return h*cos(h*x[0])
else:
return -l*sin(h*d)/sin(l*(a-d))*cos(l*(a-x[0]))
from hedge.tools import make_obj_array
result_zero = discr.volume_zeros(kind="numpy", dtype=numpy.float64)
H_z = make_tdep_given(initial_Hz).volume_interpolant(0, discr)
return make_obj_array([result_zero, result_zero, H_z])
if rcon.is_head_rank:
from hedge.mesh.reader.gmsh import generate_gmsh
mesh = generate_gmsh(CAVITY_GEOMETRY, 2, force_dimension=2)
mesh_data = rcon.distribute_mesh(mesh)
else:
mesh_data = rcon.receive_mesh()
# Work out which elements belong to each material
material_elements = {}
for key in materials.keys():
material_elements[key] = set(mesh_data.tag_to_elements[key])
order = 3
#extra_discr_args.setdefault("debug", []).append("cuda_no_plan")
#extra_discr_args.setdefault("debug", []).append("dump_optemplate_stages")
from hedge.data import make_tdep_given
from hedge.mesh import TAG_ALL
op = TEMaxwellOperator(epsilon=make_tdep_given(eps_val), mu=make_tdep_given(mu_val), \
flux_type=flux_type_arg, \
bdry_flux_type=bdry_flux_type_arg, dimensions=2, pec_tag=TAG_ALL)
# op = TEMaxwellOperator(epsilon=epsilon0, mu=mu0,
# flux_type=flux_type_arg, \
# bdry_flux_type=bdry_flux_type_arg, dimensions=2, pec_tag=TAG_ALL)
discr = rcon.make_discretization(mesh_data, order=order,
tune_for=op.op_template(),
**extra_discr_args)
# create the initial solution
fields = initial_val(discr)
from hedge.visualization import VtkVisualizer
if write_output:
from os.path import join
vis = VtkVisualizer(discr, rcon, join(output_dir, "cav-%d" % order))
# monitor the solution at a point to find the resonant frequency
try:
point_getter = discr.get_point_evaluator(numpy.array([75e-3, 25e-3, 0])) #[0.25, 0.25, 0.25]))
except RuntimeError:
point_getter = None
if rcon.is_head_rank:
print "---------------------------------------------"
print "order %d" % order
print "---------------------------------------------"
print "#elements=", len(mesh.elements)
from hedge.timestep.runge_kutta import LSRK4TimeStepper
stepper = LSRK4TimeStepper(dtype=discr.default_scalar_type, rcon=rcon)
#from hedge.timestep.dumka3 import Dumka3TimeStepper
#stepper = Dumka3TimeStepper(3, dtype=discr.default_scalar_type, rcon=rcon)
# diagnostics setup ---------------------------------------------------
from pytools.log import LogManager, add_general_quantities, \
add_simulation_quantities, add_run_info
if write_output:
from os.path import join
log_file_name = join(output_dir, "cavity-%d.dat" % order)
else:
log_file_name = None
logmgr = LogManager(log_file_name, "w", rcon.communicator)
add_run_info(logmgr)
add_general_quantities(logmgr)
add_simulation_quantities(logmgr)
discr.add_instrumentation(logmgr)
stepper.add_instrumentation(logmgr)
from pytools.log import IntervalTimer
vis_timer = IntervalTimer("t_vis", "Time spent visualizing")
logmgr.add_quantity(vis_timer)
#from hedge.log import EMFieldGetter, add_em_quantities
#field_getter = EMFieldGetter(discr, op, lambda: fields)
#add_em_quantities(logmgr, op, field_getter)
logmgr.add_watches(
["step.max", "t_sim.max",
#("W_field", "W_el+W_mag"),
"t_step.max"]
)
# timestep loop -------------------------------------------------------
rhs = op.bind(discr)
final_time = 10e-9
if point_getter is not None:
from os.path import join
pointfile = open(join(output_dir, "point.txt"), "wt")
done_dt = False
try:
from hedge.timestep import times_and_steps
from os.path import join
step_it = times_and_steps(
final_time=final_time, logmgr=logmgr,
max_dt_getter=lambda t: op.estimate_timestep(discr,
stepper=stepper, t=t, fields=fields))
for step, t, dt in step_it:
if step % 10 == 0 and write_output:
sub_timer = vis_timer.start_sub_timer()
e, h = op.split_eh(fields)
visf = vis.make_file(join(output_dir, "cav-%d-%04d") % (order, step))
vis.add_data(visf,
[
("e",
discr.convert_volume(e, kind="numpy")),
("h",
discr.convert_volume(h, kind="numpy")),],
time=t, step=step
)
visf.close()
sub_timer.stop().submit()
fields = stepper(fields, t, dt, rhs)
if point_getter is not None:
val = point_getter(fields)
#print val
if not done_dt:
pointfile.write("#%g\n" % dt)
done_dt = True
pointfile.write("%g\n" %val[0])
finally:
if write_output:
vis.close()
logmgr.close()
discr.close()
if point_getter is not None:
pointfile.close()
def main(write_output=True,
flux_type_arg="upwind", dtype=numpy.float64, debug=[]):
from pytools.stopwatch import Job
from math import sin, cos, pi, exp, sqrt
from hedge.backends import guess_run_context
rcon = guess_run_context()
if rcon.is_head_rank:
from hedge.mesh.reader.gmsh import generate_gmsh
mesh = generate_gmsh(GEOMETRY, 2,
allow_internal_boundaries=True)
print "%d elements" % len(mesh.elements)
mesh_data = rcon.distribute_mesh(mesh)
else:
mesh_data = rcon.receive_mesh()
discr = rcon.make_discretization(mesh_data, order=4, debug=debug,
default_scalar_type=dtype)
from hedge.timestep import RK4TimeStepper
stepper = RK4TimeStepper(dtype=dtype)
from hedge.visualization import VtkVisualizer
if write_output:
vis = VtkVisualizer(discr, rcon, "fld")
def source_u(x, el):
return exp(-numpy.dot(x, x)*128)
from hedge.models.wave import StrongWaveOperator
from hedge.mesh import TAG_ALL, TAG_NONE
from hedge.data import \
make_tdep_given, \
TimeHarmonicGivenFunction, \
TimeIntervalGivenFunction
op = StrongWaveOperator(-1, discr.dimensions,
source_f=TimeIntervalGivenFunction(
TimeHarmonicGivenFunction(
make_tdep_given(source_u), omega=10),
0, 1),
dirichlet_tag="boundary",
neumann_tag=TAG_NONE,
radiation_tag=TAG_NONE,
flux_type=flux_type_arg
)
from hedge.tools import join_fields
fields = join_fields(discr.volume_zeros(dtype=dtype),
[discr.volume_zeros(dtype=dtype) for i in range(discr.dimensions)])
# diagnostics setup -------------------------------------------------------
from pytools.log import LogManager, \
add_general_quantities, \
add_simulation_quantities, \
add_run_info
if write_output:
log_file_name = "wiggly.dat"
else:
log_file_name = None
logmgr = LogManager(log_file_name, "w", rcon.communicator)
add_run_info(logmgr)
add_general_quantities(logmgr)
add_simulation_quantities(logmgr)
discr.add_instrumentation(logmgr)
stepper.add_instrumentation(logmgr)
logmgr.add_watches(["step.max", "t_sim.max", "t_step.max"])
# timestep loop -----------------------------------------------------------
rhs = op.bind(discr)
try:
from hedge.timestep import times_and_steps
step_it = times_and_steps(
final_time=4, logmgr=logmgr,
max_dt_getter=lambda t: op.estimate_timestep(discr,
stepper=stepper, t=t, fields=fields))
for step, t, dt in step_it:
if step % 10 == 0 and write_output:
visf = vis.make_file("fld-%04d" % step)
vis.add_data(visf,
[
("u", fields[0]),
("v", fields[1:]),
],
time=t,
step=step)
visf.close()
fields = stepper(fields, t, dt, rhs)
assert discr.norm(fields) < 1
assert fields[0].dtype == dtype
finally:
if write_output:
vis.close()
logmgr.close()
discr.close()
def main(write_output=True,
flux_type_arg="upwind",
dtype=np.float64,
debug=[]):
from math import sin, cos, pi, exp, sqrt # noqa
from hedge.backends import guess_run_context
rcon = guess_run_context()
if rcon.is_head_rank:
from hedge.mesh.reader.gmsh import generate_gmsh
mesh = generate_gmsh(GEOMETRY,
2,
allow_internal_boundaries=True,
force_dimension=2)
print "%d elements" % len(mesh.elements)
mesh_data = rcon.distribute_mesh(mesh)
else:
mesh_data = rcon.receive_mesh()
discr = rcon.make_discretization(mesh_data,
order=4,
debug=debug,
default_scalar_type=dtype)
from hedge.timestep.runge_kutta import LSRK4TimeStepper
stepper = LSRK4TimeStepper(dtype=dtype)
from hedge.visualization import VtkVisualizer
if write_output:
vis = VtkVisualizer(discr, rcon, "fld")
source_center = 0
source_width = 0.05
source_omega = 3
import hedge.optemplate as sym
sym_x = sym.nodes(2)
sym_source_center_dist = sym_x - source_center
from hedge.models.wave import StrongWaveOperator
op = StrongWaveOperator(
-1,
discr.dimensions,
source_f=sym.CFunction("sin")(
source_omega * sym.ScalarParameter("t")) * sym.CFunction("exp")(
-np.dot(sym_source_center_dist, sym_source_center_dist) /
source_width**2),
dirichlet_tag="boundary",
neumann_tag=TAG_NONE,
radiation_tag=TAG_NONE,
flux_type=flux_type_arg)
from hedge.tools import join_fields
fields = join_fields(
discr.volume_zeros(dtype=dtype),
[discr.volume_zeros(dtype=dtype) for i in range(discr.dimensions)])
# diagnostics setup -------------------------------------------------------
from pytools.log import LogManager, \
add_general_quantities, \
add_simulation_quantities, \
add_run_info
if write_output:
log_file_name = "wiggly.dat"
else:
log_file_name = None
logmgr = LogManager(log_file_name, "w", rcon.communicator)
add_run_info(logmgr)
add_general_quantities(logmgr)
add_simulation_quantities(logmgr)
discr.add_instrumentation(logmgr)
stepper.add_instrumentation(logmgr)
logmgr.add_watches(["step.max", "t_sim.max", "t_step.max"])
# timestep loop -----------------------------------------------------------
rhs = op.bind(discr)
try:
from hedge.timestep import times_and_steps
step_it = times_and_steps(
final_time=4,
logmgr=logmgr,
max_dt_getter=lambda t: op.estimate_timestep(
discr, stepper=stepper, t=t, fields=fields))
for step, t, dt in step_it:
if step % 10 == 0 and write_output:
visf = vis.make_file("fld-%04d" % step)
vis.add_data(visf, [
("u", fields[0]),
("v", fields[1:]),
],
time=t,
step=step)
visf.close()
fields = stepper(fields, t, dt, rhs)
assert discr.norm(fields) < 1
assert fields[0].dtype == dtype
finally:
if write_output:
vis.close()
logmgr.close()
discr.close()
def main(write_output=True,
flux_type_arg="upwind", dtype=np.float64, debug=[]):
from math import sin, cos, pi, exp, sqrt # noqa
from hedge.backends import guess_run_context
rcon = guess_run_context()
if rcon.is_head_rank:
from hedge.mesh.reader.gmsh import generate_gmsh
mesh = generate_gmsh(GEOMETRY, 2,
allow_internal_boundaries=True,
force_dimension=2)
print "%d elements" % len(mesh.elements)
mesh_data = rcon.distribute_mesh(mesh)
else:
mesh_data = rcon.receive_mesh()
discr = rcon.make_discretization(mesh_data, order=4, debug=debug,
default_scalar_type=dtype)
from hedge.timestep.runge_kutta import LSRK4TimeStepper
stepper = LSRK4TimeStepper(dtype=dtype)
from hedge.visualization import VtkVisualizer
if write_output:
vis = VtkVisualizer(discr, rcon, "fld")
source_center = 0
source_width = 0.05
source_omega = 3
import hedge.optemplate as sym
sym_x = sym.nodes(2)
sym_source_center_dist = sym_x - source_center
from hedge.models.wave import StrongWaveOperator
op = StrongWaveOperator(-1, discr.dimensions,
source_f=
sym.CFunction("sin")(source_omega*sym.ScalarParameter("t"))
* sym.CFunction("exp")(
-np.dot(sym_source_center_dist, sym_source_center_dist)
/ source_width**2),
dirichlet_tag="boundary",
neumann_tag=TAG_NONE,
radiation_tag=TAG_NONE,
flux_type=flux_type_arg
)
from hedge.tools import join_fields
fields = join_fields(discr.volume_zeros(dtype=dtype),
[discr.volume_zeros(dtype=dtype) for i in range(discr.dimensions)])
# diagnostics setup -------------------------------------------------------
from pytools.log import LogManager, \
add_general_quantities, \
add_simulation_quantities, \
add_run_info
if write_output:
log_file_name = "wiggly.dat"
else:
log_file_name = None
logmgr = LogManager(log_file_name, "w", rcon.communicator)
add_run_info(logmgr)
add_general_quantities(logmgr)
add_simulation_quantities(logmgr)
discr.add_instrumentation(logmgr)
stepper.add_instrumentation(logmgr)
logmgr.add_watches(["step.max", "t_sim.max", "t_step.max"])
# timestep loop -----------------------------------------------------------
rhs = op.bind(discr)
try:
from hedge.timestep import times_and_steps
step_it = times_and_steps(
final_time=4, logmgr=logmgr,
max_dt_getter=lambda t: op.estimate_timestep(discr,
stepper=stepper, t=t, fields=fields))
for step, t, dt in step_it:
if step % 10 == 0 and write_output:
visf = vis.make_file("fld-%04d" % step)
vis.add_data(visf,
[
("u", fields[0]),
("v", fields[1:]),
],
time=t,
step=step)
visf.close()
fields = stepper(fields, t, dt, rhs)
assert discr.norm(fields) < 1
assert fields[0].dtype == dtype
finally:
if write_output:
vis.close()
logmgr.close()
discr.close()
