Exemplo n.º 1
0
    def process(self):
        if self.is_valid_session():
            ap = activity_processor.ActivityProcessor()
            db_session = ap.get_session_by_key(session_key=self.get_session_key())

            this_state = self.timeline['state']
            this_key = str(self.timeline['ratingKey'])

            # If we already have this session in the temp table, check for state changes
            if db_session:
                last_state = db_session['state']
                last_key = str(db_session['rating_key'])

                # Make sure the same item is being played
                if this_key == last_key:
                    # Update the session state and viewOffset
                    if this_state == 'playing':
                        ap.set_session_state(session_key=self.get_session_key(),
                                             state=this_state,
                                             view_offset=self.timeline['viewOffset'])
                    # Start our state checks
                    if this_state != last_state:
                        if this_state == 'paused':
                            self.on_pause()
                        elif last_state == 'paused' and this_state == 'playing':
                            self.on_resume()
                        elif this_state == 'stopped':
                            self.on_stop()
                    elif this_state == 'buffering':
                        self.on_buffer()
                # If a client doesn't register stop events (I'm looking at you PHT!) check if the ratingKey has changed
                else:
                    # Manually stop and start
                    # Set force_stop so that we don't overwrite our last viewOffset
                    self.on_stop(force_stop=True)
                    self.on_start()

                # Monitor if the stream has reached the watch percentage for notifications
                # The only purpose of this is for notifications
                # Check if any notification agents have notifications enabled
                notify_agents = [d['id'] for d in notifiers.available_notification_agents() if d['on_watched']]
                # Get the current states for notifications from our db
                notified_agents = [d['agent_id'] for d in notification_handler.get_notify_state(session=db_session)
                                   if d['notify_action'] == 'watched'] if notify_agents else []

                if any(a not in notified_agents for a in notify_agents):
                    progress_percent = helpers.get_percent(self.timeline['viewOffset'], db_session['duration'])
                    if progress_percent >= plexpy.CONFIG.NOTIFY_WATCHED_PERCENT and this_state != 'buffering':
                        # Rather not put this on it's own thread so we know it completes before our next event.
                        notification_handler.notify(stream_data=db_session, notify_action='watched')

            else:
                # We don't have this session in our table yet, start a new one.
                if this_state != 'buffering':
                    self.on_start()
Exemplo n.º 2
0
    def get_synced_items(self, machine_id=None, user_id=None):
        sync_list = self.get_plextv_sync_lists(machine_id)
        user_data = users.Users()

        synced_items = []

        try:
            xml_parse = minidom.parseString(sync_list)
        except Exception as e:
            logger.warn(u"PlexPy PlexTV :: Unable to parse XML for get_synced_items: %s" % e)
            return []
        except:
            logger.warn(u"PlexPy PlexTV :: Unable to parse XML for get_synced_items.")
            return []

        xml_head = xml_parse.getElementsByTagName('SyncList')

        if not xml_head:
            logger.warn(u"PlexPy PlexTV :: Unable to parse XML for get_synced_items.")
        else:
            for a in xml_head:
                client_id = helpers.get_xml_attr(a, 'id')
                sync_device = a.getElementsByTagName('Device')
                for device in sync_device:
                    device_user_id = helpers.get_xml_attr(device, 'userID')
                    try:
                        device_username = user_data.get_details(user_id=device_user_id)['username']
                        device_friendly_name = user_data.get_details(user_id=device_user_id)['friendly_name']
                    except:
                        device_username = ''
                        device_friendly_name = ''
                    device_name = helpers.get_xml_attr(device, 'name')
                    device_product = helpers.get_xml_attr(device, 'product')
                    device_product_version = helpers.get_xml_attr(device, 'productVersion')
                    device_platform = helpers.get_xml_attr(device, 'platform')
                    device_platform_version = helpers.get_xml_attr(device, 'platformVersion')
                    device_type = helpers.get_xml_attr(device, 'device')
                    device_model = helpers.get_xml_attr(device, 'model')
                    device_last_seen = helpers.get_xml_attr(device, 'lastSeenAt')

                # Filter by user_id
                if user_id and user_id != device_user_id:
                    continue

                for synced in a.getElementsByTagName('SyncItems'):
                    sync_item = synced.getElementsByTagName('SyncItem')
                    for item in sync_item:
                        sync_id = helpers.get_xml_attr(item, 'id')
                        sync_version = helpers.get_xml_attr(item, 'version')
                        sync_root_title = helpers.get_xml_attr(item, 'rootTitle')
                        sync_title = helpers.get_xml_attr(item, 'title')
                        sync_metadata_type = helpers.get_xml_attr(item, 'metadataType')
                        sync_content_type = helpers.get_xml_attr(item, 'contentType')

                        for status in item.getElementsByTagName('Status'):
                            status_failure_code = helpers.get_xml_attr(status, 'failureCode')
                            status_failure = helpers.get_xml_attr(status, 'failure')
                            status_state = helpers.get_xml_attr(status, 'state')
                            status_item_count = helpers.get_xml_attr(status, 'itemsCount')
                            status_item_complete_count = helpers.get_xml_attr(status, 'itemsCompleteCount')
                            status_item_downloaded_count = helpers.get_xml_attr(status, 'itemsDownloadedCount')
                            status_item_ready_count = helpers.get_xml_attr(status, 'itemsReadyCount')
                            status_item_successful_count = helpers.get_xml_attr(status, 'itemsSuccessfulCount')
                            status_total_size = helpers.get_xml_attr(status, 'totalSize')
                            status_item_download_percent_complete = helpers.get_percent(
                                status_item_downloaded_count, status_item_count)

                        for settings in item.getElementsByTagName('MediaSettings'):
                            settings_audio_boost = helpers.get_xml_attr(settings, 'audioBoost')
                            settings_music_bitrate = helpers.get_xml_attr(settings, 'musicBitrate')
                            settings_photo_quality = helpers.get_xml_attr(settings, 'photoQuality')
                            settings_photo_resolution = helpers.get_xml_attr(settings, 'photoResolution')
                            settings_video_quality = helpers.get_xml_attr(settings, 'videoQuality')
                            settings_video_resolution = helpers.get_xml_attr(settings, 'videoResolution')

                        for location in item.getElementsByTagName('Location'):
                            clean_uri = helpers.get_xml_attr(location, 'uri').split('%2F')

                        rating_key = next((clean_uri[(idx + 1) % len(clean_uri)] 
                                           for idx, item in enumerate(clean_uri) if item == 'metadata'), None)

                        sync_details = {"device_name": helpers.sanitize(device_name),
                                        "platform": helpers.sanitize(device_platform),
                                        "username": helpers.sanitize(device_username),
                                        "friendly_name": helpers.sanitize(device_friendly_name),
                                        "user_id": device_user_id,
                                        "root_title": helpers.sanitize(sync_root_title),
                                        "title": helpers.sanitize(sync_title),
                                        "metadata_type": sync_metadata_type,
                                        "content_type": sync_content_type,
                                        "rating_key": rating_key,
                                        "state": status_state,
                                        "item_count": status_item_count,
                                        "item_complete_count": status_item_complete_count,
                                        "item_downloaded_count": status_item_downloaded_count,
                                        "item_downloaded_percent_complete": status_item_download_percent_complete,
                                        "music_bitrate": settings_music_bitrate,
                                        "photo_quality": settings_photo_quality,
                                        "video_quality": settings_video_quality,
                                        "total_size": status_total_size,
                                        "failure": status_failure,
                                        "sync_id": sync_id
                                        }

                        synced_items.append(sync_details)

        return session.filter_session_info(synced_items, filter_key='user_id')
Exemplo n.º 3
0
def check_active_sessions(ws_request=False):

    with monitor_lock:
        monitor_db = database.MonitorDatabase()
        monitor_process = activity_processor.ActivityProcessor()
        db_streams = monitor_process.get_sessions()

        # Clear the metadata cache
        for stream in db_streams:
            activity_handler.delete_metadata_cache(stream['session_key'])

        pms_connect = pmsconnect.PmsConnect()
        session_list = pms_connect.get_current_activity()

        logger.debug("Tautulli Monitor :: Checking for active streams.")

        if session_list:
            media_container = session_list['sessions']

            # Check our temp table for what we must do with the new streams
            for stream in db_streams:
                if any(d['session_key'] == str(stream['session_key'])
                       and d['rating_key'] == str(stream['rating_key'])
                       for d in media_container):
                    # The user's session is still active
                    for session in media_container:
                        if session['session_key'] == str(stream['session_key']) and \
                                session['rating_key'] == str(stream['rating_key']):
                            # The user is still playing the same media item
                            # Here we can check the play states
                            if session['state'] != stream['state']:
                                if session['state'] == 'paused':
                                    logger.debug(
                                        "Tautulli Monitor :: Session %s paused."
                                        % stream['session_key'])

                                    plexpy.NOTIFY_QUEUE.put({
                                        'stream_data':
                                        stream.copy(),
                                        'notify_action':
                                        'on_pause'
                                    })

                                if session['state'] == 'playing' and stream[
                                        'state'] == 'paused':
                                    logger.debug(
                                        "Tautulli Monitor :: Session %s resumed."
                                        % stream['session_key'])

                                    plexpy.NOTIFY_QUEUE.put({
                                        'stream_data':
                                        stream.copy(),
                                        'notify_action':
                                        'on_resume'
                                    })

                                if session['state'] == 'error':
                                    logger.debug(
                                        "Tautulli Monitor :: Session %s encountered an error."
                                        % stream['session_key'])

                                    plexpy.NOTIFY_QUEUE.put({
                                        'stream_data':
                                        stream.copy(),
                                        'notify_action':
                                        'on_error'
                                    })

                            if stream['state'] == 'paused' and not ws_request:
                                # The stream is still paused so we need to increment the paused_counter
                                # Using the set config parameter as the interval, probably not the most accurate but
                                # it will have to do for now. If it's a websocket request don't use this method.
                                paused_counter = int(
                                    stream['paused_counter']
                                ) + plexpy.CONFIG.MONITORING_INTERVAL
                                monitor_db.action(
                                    'UPDATE sessions SET paused_counter = ? '
                                    'WHERE session_key = ? AND rating_key = ?',
                                    [
                                        paused_counter, stream['session_key'],
                                        stream['rating_key']
                                    ])

                            if session[
                                    'state'] == 'buffering' and plexpy.CONFIG.BUFFER_THRESHOLD > 0:
                                # The stream is buffering so we need to increment the buffer_count
                                # We're going just increment on every monitor ping,
                                # would be difficult to keep track otherwise
                                monitor_db.action(
                                    'UPDATE sessions SET buffer_count = buffer_count + 1 '
                                    'WHERE session_key = ? AND rating_key = ?',
                                    [
                                        stream['session_key'],
                                        stream['rating_key']
                                    ])

                                # Check the current buffer count and last buffer to determine if we should notify
                                buffer_values = monitor_db.select(
                                    'SELECT buffer_count, buffer_last_triggered '
                                    'FROM sessions '
                                    'WHERE session_key = ? AND rating_key = ?',
                                    [
                                        stream['session_key'],
                                        stream['rating_key']
                                    ])

                                if buffer_values[0][
                                        'buffer_count'] >= plexpy.CONFIG.BUFFER_THRESHOLD:
                                    # Push any notifications -
                                    # Push it on it's own thread so we don't hold up our db actions
                                    # Our first buffer notification
                                    if buffer_values[0][
                                            'buffer_count'] == plexpy.CONFIG.BUFFER_THRESHOLD:
                                        logger.info(
                                            "Tautulli Monitor :: User '%s' has triggered a buffer warning."
                                            % stream['user'])
                                        # Set the buffer trigger time
                                        monitor_db.action(
                                            'UPDATE sessions '
                                            'SET buffer_last_triggered = strftime("%s","now") '
                                            'WHERE session_key = ? AND rating_key = ?',
                                            [
                                                stream['session_key'],
                                                stream['rating_key']
                                            ])

                                        plexpy.NOTIFY_QUEUE.put({
                                            'stream_data':
                                            stream.copy(),
                                            'notify_action':
                                            'on_buffer'
                                        })

                                    else:
                                        # Subsequent buffer notifications after wait time
                                        if helpers.timestamp() > buffer_values[0]['buffer_last_triggered'] + \
                                                plexpy.CONFIG.BUFFER_WAIT:
                                            logger.info(
                                                "Tautulli Monitor :: User '%s' has triggered multiple buffer warnings."
                                                % stream['user'])
                                            # Set the buffer trigger time
                                            monitor_db.action(
                                                'UPDATE sessions '
                                                'SET buffer_last_triggered = strftime("%s","now") '
                                                'WHERE session_key = ? AND rating_key = ?',
                                                [
                                                    stream['session_key'],
                                                    stream['rating_key']
                                                ])

                                            plexpy.NOTIFY_QUEUE.put({
                                                'stream_data':
                                                stream.copy(),
                                                'notify_action':
                                                'on_buffer'
                                            })

                                logger.debug(
                                    "Tautulli Monitor :: Session %s is buffering. Count is now %s. Last triggered %s."
                                    %
                                    (stream['session_key'],
                                     buffer_values[0]['buffer_count'],
                                     buffer_values[0]['buffer_last_triggered'])
                                )

                            # Check if the user has reached the offset in the media we defined as the "watched" percent
                            # Don't trigger if state is buffer as some clients push the progress to the end when
                            # buffering on start.
                            if session['state'] != 'buffering':
                                progress_percent = helpers.get_percent(
                                    session['view_offset'],
                                    session['duration'])
                                notify_states = notification_handler.get_notify_state(
                                    session=session)
                                if (session['media_type'] == 'movie' and progress_percent >= plexpy.CONFIG.MOVIE_WATCHED_PERCENT or
                                    session['media_type'] == 'episode' and progress_percent >= plexpy.CONFIG.TV_WATCHED_PERCENT or
                                    session['media_type'] == 'track' and progress_percent >= plexpy.CONFIG.MUSIC_WATCHED_PERCENT) \
                                    and not any(d['notify_action'] == 'on_watched' for d in notify_states):
                                    plexpy.NOTIFY_QUEUE.put({
                                        'stream_data':
                                        stream.copy(),
                                        'notify_action':
                                        'on_watched'
                                    })

                else:
                    # The user has stopped playing a stream
                    if stream['state'] != 'stopped':
                        logger.debug(
                            "Tautulli Monitor :: Session %s stopped." %
                            stream['session_key'])

                        if not stream['stopped']:
                            # Set the stream stop time
                            stream['stopped'] = helpers.timestamp()
                            monitor_db.action(
                                'UPDATE sessions SET stopped = ?, state = ? '
                                'WHERE session_key = ? AND rating_key = ?', [
                                    stream['stopped'], 'stopped',
                                    stream['session_key'], stream['rating_key']
                                ])

                        progress_percent = helpers.get_percent(
                            stream['view_offset'], stream['duration'])
                        notify_states = notification_handler.get_notify_state(
                            session=stream)
                        if (stream['media_type'] == 'movie' and progress_percent >= plexpy.CONFIG.MOVIE_WATCHED_PERCENT or
                            stream['media_type'] == 'episode' and progress_percent >= plexpy.CONFIG.TV_WATCHED_PERCENT or
                            stream['media_type'] == 'track' and progress_percent >= plexpy.CONFIG.MUSIC_WATCHED_PERCENT) \
                            and not any(d['notify_action'] == 'on_watched' for d in notify_states):
                            plexpy.NOTIFY_QUEUE.put({
                                'stream_data':
                                stream.copy(),
                                'notify_action':
                                'on_watched'
                            })

                        plexpy.NOTIFY_QUEUE.put({
                            'stream_data': stream.copy(),
                            'notify_action': 'on_stop'
                        })

                    # Write the item history on playback stop
                    row_id = monitor_process.write_session_history(
                        session=stream)

                    if row_id:
                        # If session is written to the databaase successfully, remove the session from the session table
                        logger.debug(
                            "Tautulli Monitor :: Removing sessionKey %s ratingKey %s from session queue"
                            % (stream['session_key'], stream['rating_key']))
                        monitor_process.delete_session(row_id=row_id)
                    else:
                        stream['write_attempts'] += 1

                        if stream[
                                'write_attempts'] < plexpy.CONFIG.SESSION_DB_WRITE_ATTEMPTS:
                            logger.warn("Tautulli Monitor :: Failed to write sessionKey %s ratingKey %s to the database. " \
                                        "Will try again on the next pass. Write attempt %s."
                                        % (stream['session_key'], stream['rating_key'], str(stream['write_attempts'])))
                            monitor_process.increment_write_attempts(
                                session_key=stream['session_key'])
                        else:
                            logger.warn("Tautulli Monitor :: Failed to write sessionKey %s ratingKey %s to the database. " \
                                        "Removing session from the database. Write attempt %s."
                                        % (stream['session_key'], stream['rating_key'], str(stream['write_attempts'])))
                            logger.debug(
                                "Tautulli Monitor :: Removing sessionKey %s ratingKey %s from session queue"
                                %
                                (stream['session_key'], stream['rating_key']))
                            monitor_process.delete_session(
                                session_key=stream['session_key'])

            # Process the newly received session data
            for session in media_container:
                new_session = monitor_process.write_session(session)

                if new_session:
                    logger.debug(
                        "Tautulli Monitor :: Session %s started by user %s (%s) with ratingKey %s (%s)%s."
                        % (str(session['session_key']), str(
                            session['user_id']), session['username'],
                           str(session['rating_key']), session['full_title'],
                           '[Live TV]' if session['live'] else ''))

        else:
            logger.debug("Tautulli Monitor :: Unable to read session list.")
Exemplo n.º 4
0
def check_active_sessions(ws_request=False):

    with monitor_lock:
        pms_connect = pmsconnect.PmsConnect()
        session_list = pms_connect.get_current_activity()
        monitor_db = database.MonitorDatabase()
        monitor_process = activity_processor.ActivityProcessor()
        # logger.debug(u"PlexPy Monitor :: Checking for active streams.")

        global int_ping_count

        if session_list:
            if int_ping_count >= 3:
                logger.info(u"PlexPy Monitor :: The Plex Media Server is back up.")

                # Check if any notification agents have notifications enabled
                if any(d['on_intup'] for d in notifiers.available_notification_agents()):
                    # Fire off notifications
                    threading.Thread(target=notification_handler.notify_timeline,
                                        kwargs=dict(notify_action='intup')).start()
            int_ping_count = 0

            media_container = session_list['sessions']

            # Check our temp table for what we must do with the new streams
            db_streams = monitor_db.select('SELECT * FROM sessions')
            for stream in db_streams:
                if any(d['session_key'] == str(stream['session_key']) and d['rating_key'] == str(stream['rating_key'])
                       for d in media_container):
                    # The user's session is still active
                    for session in media_container:
                        if session['session_key'] == str(stream['session_key']) and \
                                session['rating_key'] == str(stream['rating_key']):
                            # The user is still playing the same media item
                            # Here we can check the play states
                            if session['state'] != stream['state']:
                                if session['state'] == 'paused':
                                    logger.debug(u"PlexPy Monitor :: Session %s has been paused." % stream['session_key'])

                                    # Check if any notification agents have notifications enabled
                                    if any(d['on_pause'] for d in notifiers.available_notification_agents()):
                                        # Push any notifications -
                                        # Push it on it's own thread so we don't hold up our db actions
                                        threading.Thread(target=notification_handler.notify,
                                                         kwargs=dict(stream_data=stream, notify_action='pause')).start()

                                if session['state'] == 'playing' and stream['state'] == 'paused':
                                    logger.debug(u"PlexPy Monitor :: Session %s has been resumed." % stream['session_key'])

                                    # Check if any notification agents have notifications enabled
                                    if any(d['on_resume'] for d in notifiers.available_notification_agents()):
                                        # Push any notifications -
                                        # Push it on it's own thread so we don't hold up our db actions
                                        threading.Thread(target=notification_handler.notify,
                                                         kwargs=dict(stream_data=stream, notify_action='resume')).start()

                            if stream['state'] == 'paused' and not ws_request:
                                # The stream is still paused so we need to increment the paused_counter
                                # Using the set config parameter as the interval, probably not the most accurate but
                                # it will have to do for now. If it's a websocket request don't use this method.
                                paused_counter = int(stream['paused_counter']) + plexpy.CONFIG.MONITORING_INTERVAL
                                monitor_db.action('UPDATE sessions SET paused_counter = ? '
                                                  'WHERE session_key = ? AND rating_key = ?',
                                                  [paused_counter, stream['session_key'], stream['rating_key']])

                            if session['state'] == 'buffering' and plexpy.CONFIG.BUFFER_THRESHOLD > 0:
                                # The stream is buffering so we need to increment the buffer_count
                                # We're going just increment on every monitor ping,
                                # would be difficult to keep track otherwise
                                monitor_db.action('UPDATE sessions SET buffer_count = buffer_count + 1 '
                                                  'WHERE session_key = ? AND rating_key = ?',
                                                  [stream['session_key'], stream['rating_key']])

                                # Check the current buffer count and last buffer to determine if we should notify
                                buffer_values = monitor_db.select('SELECT buffer_count, buffer_last_triggered '
                                                                  'FROM sessions '
                                                                  'WHERE session_key = ? AND rating_key = ?',
                                                                  [stream['session_key'], stream['rating_key']])

                                if buffer_values[0]['buffer_count'] >= plexpy.CONFIG.BUFFER_THRESHOLD:
                                    # Push any notifications -
                                    # Push it on it's own thread so we don't hold up our db actions
                                    # Our first buffer notification
                                    if buffer_values[0]['buffer_count'] == plexpy.CONFIG.BUFFER_THRESHOLD:
                                        logger.info(u"PlexPy Monitor :: User '%s' has triggered a buffer warning."
                                                    % stream['user'])
                                        # Set the buffer trigger time
                                        monitor_db.action('UPDATE sessions '
                                                          'SET buffer_last_triggered = strftime("%s","now") '
                                                          'WHERE session_key = ? AND rating_key = ?',
                                                          [stream['session_key'], stream['rating_key']])

                                        # Check if any notification agents have notifications enabled
                                        if any(d['on_buffer'] for d in notifiers.available_notification_agents()):
                                            # Push any notifications -
                                            # Push it on it's own thread so we don't hold up our db actions
                                            threading.Thread(target=notification_handler.notify,
                                                             kwargs=dict(stream_data=stream, notify_action='buffer')).start()
                                    else:
                                        # Subsequent buffer notifications after wait time
                                        if int(time.time()) > buffer_values[0]['buffer_last_triggered'] + \
                                                plexpy.CONFIG.BUFFER_WAIT:
                                            logger.info(u"PlexPy Monitor :: User '%s' has triggered multiple buffer warnings."
                                                    % stream['user'])
                                            # Set the buffer trigger time
                                            monitor_db.action('UPDATE sessions '
                                                              'SET buffer_last_triggered = strftime("%s","now") '
                                                              'WHERE session_key = ? AND rating_key = ?',
                                                              [stream['session_key'], stream['rating_key']])

                                            # Check if any notification agents have notifications enabled
                                            if any(d['on_buffer'] for d in notifiers.available_notification_agents()):
                                                # Push any notifications -
                                                # Push it on it's own thread so we don't hold up our db actions
                                                threading.Thread(target=notification_handler.notify,
                                                                 kwargs=dict(stream_data=stream, notify_action='buffer')).start()

                                logger.debug(u"PlexPy Monitor :: Session %s is buffering. Count is now %s. Last triggered %s."
                                             % (stream['session_key'],
                                                buffer_values[0]['buffer_count'],
                                                buffer_values[0]['buffer_last_triggered']))

                            # Check if the user has reached the offset in the media we defined as the "watched" percent
                            # Don't trigger if state is buffer as some clients push the progress to the end when
                            # buffering on start.
                            if session['view_offset'] and session['duration'] and session['state'] != 'buffering':
                                if helpers.get_percent(session['view_offset'],
                                                       session['duration']) > plexpy.CONFIG.NOTIFY_WATCHED_PERCENT:
                                    # Check if any notification agents have notifications enabled
                                    if any(d['on_watched'] for d in notifiers.available_notification_agents()):
                                        # Push any notifications -
                                        # Push it on it's own thread so we don't hold up our db actions
                                        threading.Thread(target=notification_handler.notify,
                                                         kwargs=dict(stream_data=stream, notify_action='watched')).start()

                else:
                    # The user has stopped playing a stream
                    if stream['state'] != 'stopped':
                        logger.debug(u"PlexPy Monitor :: Session %s has stopped." % stream['session_key'])

                        # Set the stream stop time
                        stream['stopped'] = int(time.time())
                        monitor_db.action('UPDATE sessions SET stopped = ?, state = ? '
                                          'WHERE session_key = ? AND rating_key = ?',
                                          [stream['stopped'], 'stopped', stream['session_key'], stream['rating_key']])

                        # Check if the user has reached the offset in the media we defined as the "watched" percent
                        if stream['view_offset'] and stream['duration']:
                            if helpers.get_percent(stream['view_offset'],
                                                   stream['duration']) > plexpy.CONFIG.NOTIFY_WATCHED_PERCENT:
                                # Check if any notification agents have notifications enabled
                                if any(d['on_watched'] for d in notifiers.available_notification_agents()):
                                    # Push any notifications -
                                    # Push it on it's own thread so we don't hold up our db actions
                                    threading.Thread(target=notification_handler.notify,
                                                     kwargs=dict(stream_data=stream, notify_action='watched')).start()

                        # Check if any notification agents have notifications enabled
                        if any(d['on_stop'] for d in notifiers.available_notification_agents()):
                            # Push any notifications - Push it on it's own thread so we don't hold up our db actions
                            threading.Thread(target=notification_handler.notify,
                                             kwargs=dict(stream_data=stream, notify_action='stop')).start()

                    # Write the item history on playback stop
                    success = monitor_process.write_session_history(session=stream)
                    
                    if success:
                        # If session is written to the databaase successfully, remove the session from the session table
                        logger.debug(u"PlexPy Monitor :: Removing sessionKey %s ratingKey %s from session queue"
                                     % (stream['session_key'], stream['rating_key']))
                        monitor_db.action('DELETE FROM sessions WHERE session_key = ? AND rating_key = ?',
                                          [stream['session_key'], stream['rating_key']])
                    else:
                        stream['write_attempts'] += 1

                        if stream['write_attempts'] < plexpy.CONFIG.SESSION_DB_WRITE_ATTEMPTS:
                            logger.warn(u"PlexPy Monitor :: Failed to write sessionKey %s ratingKey %s to the database. " \
                                        "Will try again on the next pass. Write attempt %s."
                                        % (stream['session_key'], stream['rating_key'], str(stream['write_attempts'])))
                            monitor_db.action('UPDATE sessions SET write_attempts = ? '
                                              'WHERE session_key = ? AND rating_key = ?',
                                              [stream['write_attempts'], stream['session_key'], stream['rating_key']])
                        else:
                            logger.warn(u"PlexPy Monitor :: Failed to write sessionKey %s ratingKey %s to the database. " \
                                        "Removing session from the database. Write attempt %s."
                                        % (stream['session_key'], stream['rating_key'], str(stream['write_attempts'])))
                            logger.debug(u"PlexPy Monitor :: Removing sessionKey %s ratingKey %s from session queue"
                                         % (stream['session_key'], stream['rating_key']))
                            monitor_db.action('DELETE FROM sessions WHERE session_key = ? AND rating_key = ?',
                                              [stream['session_key'], stream['rating_key']])


            # Process the newly received session data
            for session in media_container:
                new_session = monitor_process.write_session(session)

                if new_session:
                    logger.debug(u"PlexPy Monitor :: Session %s has started." % session['session_key'])

        else:
            logger.debug(u"PlexPy Monitor :: Unable to read session list.")

            int_ping_count += 1
            logger.warn(u"PlexPy Monitor :: Unable to get an internal response from the server, ping attempt %s." \
                        % str(int_ping_count))

        if int_ping_count == 3:
            # Check if any notification agents have notifications enabled
            if any(d['on_intdown'] for d in notifiers.available_notification_agents()):
                # Fire off notifications
                threading.Thread(target=notification_handler.notify_timeline,
                                 kwargs=dict(notify_action='intdown')).start()
Exemplo n.º 5
0
    def write_session_history(self,
                              session=None,
                              import_metadata=None,
                              is_import=False,
                              import_ignore_interval=0):
        section_id = session[
            'section_id'] if not is_import else import_metadata['section_id']

        if not is_import:
            user_data = users.Users()
            user_details = user_data.get_details(user_id=session['user_id'])

            library_data = libraries.Libraries()
            library_details = library_data.get_details(section_id=section_id)

            # Return false if failed to retrieve user or library details
            if not user_details or not library_details:
                return False

        if session:
            logging_enabled = False

            # Reload json from raw stream info
            if session.get('raw_stream_info'):
                raw_stream_info = json.loads(session['raw_stream_info'])
                # Don't overwrite id, session_key, stopped, view_offset
                raw_stream_info.pop('id', None)
                raw_stream_info.pop('session_key', None)
                raw_stream_info.pop('stopped', None)
                raw_stream_info.pop('view_offset', None)
                session.update(raw_stream_info)

            session = defaultdict(str, session)

            if is_import:
                if str(session['stopped']).isdigit():
                    stopped = int(session['stopped'])
                else:
                    stopped = int(time.time())
            elif session['stopped']:
                stopped = int(session['stopped'])
            else:
                stopped = int(time.time())
                self.set_session_state(session_key=session['session_key'],
                                       state='stopped',
                                       stopped=stopped)

            if str(session['rating_key']).isdigit(
            ) and session['media_type'] in ('movie', 'episode', 'track'):
                logging_enabled = True
            else:
                logger.debug(
                    u"Tautulli ActivityProcessor :: Session %s ratingKey %s not logged. "
                    u"Does not meet logging criteria. Media type is '%s'" %
                    (session['session_key'], session['rating_key'],
                     session['media_type']))
                return session['id']

            if str(session['paused_counter']).isdigit():
                real_play_time = stopped - session['started'] - int(
                    session['paused_counter'])
            else:
                real_play_time = stopped - session['started']

            if not is_import and plexpy.CONFIG.LOGGING_IGNORE_INTERVAL:
                if (session['media_type'] == 'movie' or session['media_type'] == 'episode') and \
                        (real_play_time < int(plexpy.CONFIG.LOGGING_IGNORE_INTERVAL)):
                    logging_enabled = False
                    logger.debug(
                        u"Tautulli ActivityProcessor :: Play duration for session %s ratingKey %s is %s secs "
                        u"which is less than %s seconds, so we're not logging it."
                        % (session['session_key'], session['rating_key'],
                           str(real_play_time),
                           plexpy.CONFIG.LOGGING_IGNORE_INTERVAL))
            if not is_import and session['media_type'] == 'track':
                if real_play_time < 15 and session['duration'] >= 30:
                    logging_enabled = False
                    logger.debug(
                        u"Tautulli ActivityProcessor :: Play duration for session %s ratingKey %s is %s secs, "
                        u"looks like it was skipped so we're not logging it" %
                        (session['session_key'], session['rating_key'],
                         str(real_play_time)))
            elif is_import and import_ignore_interval:
                if (session['media_type'] == 'movie' or session['media_type'] == 'episode') and \
                        (real_play_time < int(import_ignore_interval)):
                    logging_enabled = False
                    logger.debug(
                        u"Tautulli ActivityProcessor :: Play duration for ratingKey %s is %s secs which is less than %s "
                        u"seconds, so we're not logging it." %
                        (session['rating_key'], str(real_play_time),
                         import_ignore_interval))

            if not is_import and not user_details['keep_history']:
                logging_enabled = False
                logger.debug(
                    u"Tautulli ActivityProcessor :: History logging for user '%s' is disabled."
                    % user_details['username'])
            elif not is_import and not library_details['keep_history']:
                logging_enabled = False
                logger.debug(
                    u"Tautulli ActivityProcessor :: History logging for library '%s' is disabled."
                    % library_details['section_name'])

            if logging_enabled:

                # Fetch metadata first so we can return false if it fails
                if not is_import:
                    logger.debug(
                        u"Tautulli ActivityProcessor :: Fetching metadata for item ratingKey %s"
                        % session['rating_key'])
                    pms_connect = pmsconnect.PmsConnect()
                    metadata = pms_connect.get_metadata_details(
                        rating_key=str(session['rating_key']))
                    if not metadata:
                        return False
                    else:
                        media_info = {}
                        if 'media_info' in metadata and len(
                                metadata['media_info']) > 0:
                            media_info = metadata['media_info'][0]
                else:
                    metadata = import_metadata
                    ## TODO: Fix media info from imports. Temporary media info from import session.
                    media_info = session

                # logger.debug(u"Tautulli ActivityProcessor :: Attempting to write sessionKey %s to session_history table..."
                #              % session['session_key'])
                keys = {'id': None}
                values = {
                    'started': session['started'],
                    'stopped': stopped,
                    'rating_key': session['rating_key'],
                    'parent_rating_key': session['parent_rating_key'],
                    'grandparent_rating_key':
                    session['grandparent_rating_key'],
                    'media_type': session['media_type'],
                    'user_id': session['user_id'],
                    'user': session['user'],
                    'ip_address': session['ip_address'],
                    'paused_counter': session['paused_counter'],
                    'player': session['player'],
                    'product': session['product'],
                    'product_version': session['product_version'],
                    'platform': session['platform'],
                    'platform_version': session['platform_version'],
                    'profile': session['profile'],
                    'machine_id': session['machine_id'],
                    'bandwidth': session['bandwidth'],
                    'location': session['location'],
                    'quality_profile': session['quality_profile'],
                    'view_offset': session['view_offset']
                }

                # logger.debug(u"Tautulli ActivityProcessor :: Writing sessionKey %s session_history transaction..."
                #              % session['session_key'])
                self.db.upsert(table_name='session_history',
                               key_dict=keys,
                               value_dict=values)

                # Check if we should group the session, select the last two rows from the user
                query = 'SELECT id, rating_key, view_offset, user_id, reference_id FROM session_history ' \
                        'WHERE user_id = ? AND rating_key = ? ORDER BY id DESC LIMIT 2 '

                args = [session['user_id'], session['rating_key']]

                result = self.db.select(query=query, args=args)

                new_session = prev_session = None
                prev_progress_percent = media_watched_percent = 0
                # Get the last insert row id
                last_id = self.db.last_insert_id()

                if len(result) > 1:
                    new_session = {
                        'id': result[0]['id'],
                        'rating_key': result[0]['rating_key'],
                        'view_offset': result[0]['view_offset'],
                        'user_id': result[0]['user_id'],
                        'reference_id': result[0]['reference_id']
                    }

                    prev_session = {
                        'id': result[1]['id'],
                        'rating_key': result[1]['rating_key'],
                        'view_offset': result[1]['view_offset'],
                        'user_id': result[1]['user_id'],
                        'reference_id': result[1]['reference_id']
                    }

                    watched_percent = {
                        'movie': plexpy.CONFIG.MOVIE_WATCHED_PERCENT,
                        'episode': plexpy.CONFIG.TV_WATCHED_PERCENT,
                        'track': plexpy.CONFIG.MUSIC_WATCHED_PERCENT
                    }
                    prev_progress_percent = helpers.get_percent(
                        prev_session['view_offset'], session['duration'])
                    media_watched_percent = watched_percent.get(
                        session['media_type'], 0)

                query = 'UPDATE session_history SET reference_id = ? WHERE id = ? '

                # If previous session view offset less than watched percent,
                # and new session view offset is greater,
                # then set the reference_id to the previous row,
                # else set the reference_id to the new id
                if prev_session is None and new_session is None:
                    args = [last_id, last_id]
                elif prev_progress_percent < media_watched_percent and \
                        prev_session['view_offset'] <= new_session['view_offset']:
                    args = [prev_session['reference_id'], new_session['id']]
                else:
                    args = [new_session['id'], new_session['id']]

                self.db.action(query=query, args=args)

                # logger.debug(u"Tautulli ActivityProcessor :: Successfully written history item, last id for session_history is %s"
                #              % last_id)

                # Write the session_history_media_info table

                # logger.debug(u"Tautulli ActivityProcessor :: Attempting to write to sessionKey %s session_history_media_info table..."
                #              % session['session_key'])
                keys = {'id': last_id}
                values = {
                    'rating_key':
                    session['rating_key'],
                    'video_decision':
                    session['video_decision'],
                    'audio_decision':
                    session['audio_decision'],
                    'transcode_decision':
                    session['transcode_decision'],
                    'duration':
                    session['duration'],
                    'container':
                    session['container'],
                    'bitrate':
                    session['bitrate'],
                    'width':
                    session['width'],
                    'height':
                    session['height'],
                    'video_bit_depth':
                    session['video_bit_depth'],
                    'video_bitrate':
                    session['video_bitrate'],
                    'video_codec':
                    session['video_codec'],
                    'video_codec_level':
                    session['video_codec_level'],
                    'video_width':
                    session['video_width'],
                    'video_height':
                    session['video_height'],
                    'video_resolution':
                    session['video_resolution'],
                    'video_framerate':
                    session['video_framerate'],
                    'aspect_ratio':
                    session['aspect_ratio'],
                    'audio_codec':
                    session['audio_codec'],
                    'audio_bitrate':
                    session['audio_bitrate'],
                    'audio_channels':
                    session['audio_channels'],
                    'subtitle_codec':
                    session['subtitle_codec'],
                    'transcode_protocol':
                    session['transcode_protocol'],
                    'transcode_container':
                    session['transcode_container'],
                    'transcode_video_codec':
                    session['transcode_video_codec'],
                    'transcode_audio_codec':
                    session['transcode_audio_codec'],
                    'transcode_audio_channels':
                    session['transcode_audio_channels'],
                    'transcode_width':
                    session['transcode_width'],
                    'transcode_height':
                    session['transcode_height'],
                    'transcode_hw_requested':
                    session['transcode_hw_requested'],
                    'transcode_hw_full_pipeline':
                    session['transcode_hw_full_pipeline'],
                    'transcode_hw_decoding':
                    session['transcode_hw_decoding'],
                    'transcode_hw_decode':
                    session['transcode_hw_decode'],
                    'transcode_hw_decode_title':
                    session['transcode_hw_decode_title'],
                    'transcode_hw_encoding':
                    session['transcode_hw_encoding'],
                    'transcode_hw_encode':
                    session['transcode_hw_encode'],
                    'transcode_hw_encode_title':
                    session['transcode_hw_encode_title'],
                    'stream_container':
                    session['stream_container'],
                    'stream_container_decision':
                    session['stream_container_decision'],
                    'stream_bitrate':
                    session['stream_bitrate'],
                    'stream_video_decision':
                    session['stream_video_decision'],
                    'stream_video_bitrate':
                    session['stream_video_bitrate'],
                    'stream_video_codec':
                    session['stream_video_codec'],
                    'stream_video_codec_level':
                    session['stream_video_codec_level'],
                    'stream_video_bit_depth':
                    session['stream_video_bit_depth'],
                    'stream_video_height':
                    session['stream_video_height'],
                    'stream_video_width':
                    session['stream_video_width'],
                    'stream_video_resolution':
                    session['stream_video_resolution'],
                    'stream_video_framerate':
                    session['stream_video_framerate'],
                    'stream_audio_decision':
                    session['stream_audio_decision'],
                    'stream_audio_codec':
                    session['stream_audio_codec'],
                    'stream_audio_bitrate':
                    session['stream_audio_bitrate'],
                    'stream_audio_channels':
                    session['stream_audio_channels'],
                    'stream_subtitle_decision':
                    session['stream_subtitle_decision'],
                    'stream_subtitle_codec':
                    session['stream_subtitle_codec'],
                    'stream_subtitle_container':
                    session['stream_subtitle_container'],
                    'stream_subtitle_forced':
                    session['stream_subtitle_forced'],
                    'subtitles':
                    session['subtitles'],
                    'synced_version':
                    session['synced_version'],
                    'synced_version_profile':
                    session['synced_version_profile'],
                    'optimized_version':
                    session['optimized_version'],
                    'optimized_version_profile':
                    session['optimized_version_profile'],
                    'optimized_version_title':
                    session['optimized_version_title']
                }

                # logger.debug(u"Tautulli ActivityProcessor :: Writing sessionKey %s session_history_media_info transaction..."
                #              % session['session_key'])
                self.db.upsert(table_name='session_history_media_info',
                               key_dict=keys,
                               value_dict=values)

                # Write the session_history_metadata table
                directors = ";".join(metadata['directors'])
                writers = ";".join(metadata['writers'])
                actors = ";".join(metadata['actors'])
                genres = ";".join(metadata['genres'])
                labels = ";".join(metadata['labels'])

                # logger.debug(u"Tautulli ActivityProcessor :: Attempting to write to sessionKey %s session_history_metadata table..."
                #              % session['session_key'])
                keys = {'id': last_id}
                values = {
                    'rating_key': session['rating_key'],
                    'parent_rating_key': session['parent_rating_key'],
                    'grandparent_rating_key':
                    session['grandparent_rating_key'],
                    'title': session['title'],
                    'parent_title': session['parent_title'],
                    'grandparent_title': session['grandparent_title'],
                    'original_title': session['original_title'],
                    'full_title': session['full_title'],
                    'media_index': metadata['media_index'],
                    'parent_media_index': metadata['parent_media_index'],
                    'section_id': metadata['section_id'],
                    'thumb': metadata['thumb'],
                    'parent_thumb': metadata['parent_thumb'],
                    'grandparent_thumb': metadata['grandparent_thumb'],
                    'art': metadata['art'],
                    'media_type': session['media_type'],
                    'year': metadata['year'],
                    'originally_available_at':
                    metadata['originally_available_at'],
                    'added_at': metadata['added_at'],
                    'updated_at': metadata['updated_at'],
                    'last_viewed_at': metadata['last_viewed_at'],
                    'content_rating': metadata['content_rating'],
                    'summary': metadata['summary'],
                    'tagline': metadata['tagline'],
                    'rating': metadata['rating'],
                    'duration': metadata['duration'],
                    'guid': metadata['guid'],
                    'directors': directors,
                    'writers': writers,
                    'actors': actors,
                    'genres': genres,
                    'studio': metadata['studio'],
                    'labels': labels
                }

                # logger.debug(u"Tautulli ActivityProcessor :: Writing sessionKey %s session_history_metadata transaction..."
                #              % session['session_key'])
                self.db.upsert(table_name='session_history_metadata',
                               key_dict=keys,
                               value_dict=values)

            # Return the session row id when the session is successfully written to the database
            return session['id']
Exemplo n.º 6
0
    def process(self):
        if self.is_valid_session():
            ap = activity_processor.ActivityProcessor()
            db_session = ap.get_session_by_key(
                session_key=self.get_session_key())

            this_state = self.timeline['state']
            this_rating_key = str(self.timeline['ratingKey'])
            this_key = self.timeline['key']

            # Get the live tv session uuid
            this_live_uuid = this_key.split('/')[-1] if this_key.startswith(
                '/livetv/sessions') else None

            # If we already have this session in the temp table, check for state changes
            if db_session:
                # Re-schedule the callback to reset the 5 minutes timer
                schedule_callback('session_key-{}'.format(
                    self.get_session_key()),
                                  func=force_stop_stream,
                                  args=[self.get_session_key()],
                                  minutes=5)

                last_state = db_session['state']
                last_rating_key = str(db_session['rating_key'])
                last_live_uuid = db_session['live_uuid']

                # Make sure the same item is being played
                if this_rating_key == last_rating_key or this_live_uuid == last_live_uuid:
                    # Update the session state and viewOffset
                    if this_state == 'playing':
                        # Update the session in our temp session table
                        # if the last set temporary stopped time exceeds 15 seconds
                        if int(time.time()) - db_session['stopped'] > 60:
                            self.update_db_session()

                    # Start our state checks
                    if this_state != last_state:
                        if this_state == 'paused':
                            self.on_pause()
                        elif last_state == 'paused' and this_state == 'playing':
                            self.on_resume()
                        elif this_state == 'stopped':
                            self.on_stop()

                    elif this_state == 'buffering':
                        self.on_buffer()

                    elif this_state == 'paused':
                        # Update the session last_paused timestamp
                        self.on_pause(still_paused=True)

                # If a client doesn't register stop events (I'm looking at you PHT!) check if the ratingKey has changed
                else:
                    # Manually stop and start
                    # Set force_stop so that we don't overwrite our last viewOffset
                    self.on_stop(force_stop=True)
                    self.on_start()

                # Monitor if the stream has reached the watch percentage for notifications
                # The only purpose of this is for notifications
                if not db_session['watched'] and this_state != 'buffering':
                    progress_percent = helpers.get_percent(
                        self.timeline['viewOffset'], db_session['duration'])
                    watched_percent = {
                        'movie': plexpy.CONFIG.MOVIE_WATCHED_PERCENT,
                        'episode': plexpy.CONFIG.TV_WATCHED_PERCENT,
                        'track': plexpy.CONFIG.MUSIC_WATCHED_PERCENT,
                        'clip': plexpy.CONFIG.TV_WATCHED_PERCENT
                    }

                    if progress_percent >= watched_percent.get(
                            db_session['media_type'], 101):
                        logger.debug(
                            u"Tautulli ActivityHandler :: Session %s watched."
                            % str(self.get_session_key()))
                        ap.set_watched(session_key=self.get_session_key())

                        watched_notifiers = notification_handler.get_notify_state_enabled(
                            session=db_session,
                            notify_action='on_watched',
                            notified=False)

                        for d in watched_notifiers:
                            plexpy.NOTIFY_QUEUE.put({
                                'stream_data':
                                db_session.copy(),
                                'notifier_id':
                                d['notifier_id'],
                                'notify_action':
                                'on_watched'
                            })

            else:
                # We don't have this session in our table yet, start a new one.
                if this_state != 'buffering':
                    self.on_start()

                    # Schedule a callback to force stop a stale stream 5 minutes later
                    schedule_callback('session_key-{}'.format(
                        self.get_session_key()),
                                      func=force_stop_stream,
                                      args=[self.get_session_key()],
                                      minutes=5)
Exemplo n.º 7
0
    def get_synced_items(self,
                         machine_id=None,
                         client_id_filter=None,
                         user_id_filter=None,
                         rating_key_filter=None,
                         sync_id_filter=None):

        if not machine_id:
            machine_id = plexpy.CONFIG.PMS_IDENTIFIER

        if isinstance(rating_key_filter, list):
            rating_key_filter = [str(k) for k in rating_key_filter]
        elif rating_key_filter:
            rating_key_filter = [str(rating_key_filter)]

        if isinstance(user_id_filter, list):
            user_id_filter = [str(k) for k in user_id_filter]
        elif user_id_filter:
            user_id_filter = [str(user_id_filter)]

        sync_list = self.get_plextv_sync_lists(machine_id, output_format='xml')
        user_data = users.Users()

        synced_items = []

        try:
            xml_head = sync_list.getElementsByTagName('SyncList')
        except Exception as e:
            logger.warn(
                u"Tautulli PlexTV :: Unable to parse XML for get_synced_items: %s."
                % e)
            return {}

        for a in xml_head:
            client_id = helpers.get_xml_attr(a, 'clientIdentifier')

            # Filter by client_id
            if client_id_filter and str(client_id_filter) != client_id:
                continue

            sync_list_id = helpers.get_xml_attr(a, 'id')
            sync_device = a.getElementsByTagName('Device')

            for device in sync_device:
                device_user_id = helpers.get_xml_attr(device, 'userID')
                try:
                    device_username = user_data.get_details(
                        user_id=device_user_id)['username']
                    device_friendly_name = user_data.get_details(
                        user_id=device_user_id)['friendly_name']
                except:
                    device_username = ''
                    device_friendly_name = ''
                device_name = helpers.get_xml_attr(device, 'name')
                device_product = helpers.get_xml_attr(device, 'product')
                device_product_version = helpers.get_xml_attr(
                    device, 'productVersion')
                device_platform = helpers.get_xml_attr(device, 'platform')
                device_platform_version = helpers.get_xml_attr(
                    device, 'platformVersion')
                device_type = helpers.get_xml_attr(device, 'device')
                device_model = helpers.get_xml_attr(device, 'model')
                device_last_seen = helpers.get_xml_attr(device, 'lastSeenAt')

            # Filter by user_id
            if user_id_filter and device_user_id not in user_id_filter:
                continue

            for synced in a.getElementsByTagName('SyncItems'):
                sync_item = synced.getElementsByTagName('SyncItem')
                for item in sync_item:

                    for location in item.getElementsByTagName('Location'):
                        clean_uri = helpers.get_xml_attr(location,
                                                         'uri').split('%2F')

                    rating_key = next((clean_uri[(idx + 1) % len(clean_uri)]
                                       for idx, item in enumerate(clean_uri)
                                       if item == 'metadata'), None)

                    # Filter by rating_key
                    if rating_key_filter and rating_key not in rating_key_filter:
                        continue

                    sync_id = helpers.get_xml_attr(item, 'id')

                    # Filter by sync_id
                    if sync_id_filter and str(sync_id_filter) != sync_id:
                        continue

                    sync_version = helpers.get_xml_attr(item, 'version')
                    sync_root_title = helpers.get_xml_attr(item, 'rootTitle')
                    sync_title = helpers.get_xml_attr(item, 'title')
                    sync_metadata_type = helpers.get_xml_attr(
                        item, 'metadataType')
                    sync_content_type = helpers.get_xml_attr(
                        item, 'contentType')

                    for status in item.getElementsByTagName('Status'):
                        status_failure_code = helpers.get_xml_attr(
                            status, 'failureCode')
                        status_failure = helpers.get_xml_attr(
                            status, 'failure')
                        status_state = helpers.get_xml_attr(status, 'state')
                        status_item_count = helpers.get_xml_attr(
                            status, 'itemsCount')
                        status_item_complete_count = helpers.get_xml_attr(
                            status, 'itemsCompleteCount')
                        status_item_downloaded_count = helpers.get_xml_attr(
                            status, 'itemsDownloadedCount')
                        status_item_ready_count = helpers.get_xml_attr(
                            status, 'itemsReadyCount')
                        status_item_successful_count = helpers.get_xml_attr(
                            status, 'itemsSuccessfulCount')
                        status_total_size = helpers.get_xml_attr(
                            status, 'totalSize')
                        status_item_download_percent_complete = helpers.get_percent(
                            status_item_downloaded_count, status_item_count)

                    for settings in item.getElementsByTagName('MediaSettings'):
                        settings_video_bitrate = helpers.get_xml_attr(
                            settings, 'maxVideoBitrate')
                        settings_video_quality = helpers.get_xml_attr(
                            settings, 'videoQuality')
                        settings_video_resolution = helpers.get_xml_attr(
                            settings, 'videoResolution')
                        settings_audio_boost = helpers.get_xml_attr(
                            settings, 'audioBoost')
                        settings_audio_bitrate = helpers.get_xml_attr(
                            settings, 'musicBitrate')
                        settings_photo_quality = helpers.get_xml_attr(
                            settings, 'photoQuality')
                        settings_photo_resolution = helpers.get_xml_attr(
                            settings, 'photoResolution')

                    sync_details = {
                        "device_name": helpers.sanitize(device_name),
                        "platform": helpers.sanitize(device_platform),
                        "user_id": device_user_id,
                        "user": helpers.sanitize(device_friendly_name),
                        "username": helpers.sanitize(device_username),
                        "root_title": helpers.sanitize(sync_root_title),
                        "sync_title": helpers.sanitize(sync_title),
                        "metadata_type": sync_metadata_type,
                        "content_type": sync_content_type,
                        "rating_key": rating_key,
                        "state": status_state,
                        "item_count": status_item_count,
                        "item_complete_count": status_item_complete_count,
                        "item_downloaded_count": status_item_downloaded_count,
                        "item_downloaded_percent_complete":
                        status_item_download_percent_complete,
                        "video_bitrate": settings_video_bitrate,
                        "audio_bitrate": settings_audio_bitrate,
                        "photo_quality": settings_photo_quality,
                        "video_quality": settings_video_quality,
                        "total_size": status_total_size,
                        "failure": status_failure,
                        "client_id": client_id,
                        "sync_id": sync_id
                    }

                    synced_items.append(sync_details)

        return session.filter_session_info(synced_items, filter_key='user_id')
Exemplo n.º 8
0
def check_active_sessions(ws_request=False):

    with monitor_lock:
        pms_connect = pmsconnect.PmsConnect()
        session_list = pms_connect.get_current_activity()
        monitor_db = database.MonitorDatabase()
        monitor_process = activity_processor.ActivityProcessor()
        # logger.debug(u"PlexPy Monitor :: Checking for active streams.")

        global int_ping_count

        if session_list:
            if int_ping_count >= 3:
                logger.info(
                    u"PlexPy Monitor :: The Plex Media Server is back up.")

                # Check if any notification agents have notifications enabled
                if any(d['on_intup']
                       for d in notifiers.available_notification_agents()):
                    # Fire off notifications
                    threading.Thread(
                        target=notification_handler.notify_timeline,
                        kwargs=dict(notify_action='intup')).start()
            int_ping_count = 0

            media_container = session_list['sessions']

            # Check our temp table for what we must do with the new streams
            db_streams = monitor_db.select('SELECT * FROM sessions')
            for stream in db_streams:
                if any(d['session_key'] == str(stream['session_key'])
                       and d['rating_key'] == str(stream['rating_key'])
                       for d in media_container):
                    # The user's session is still active
                    for session in media_container:
                        if session['session_key'] == str(stream['session_key']) and \
                                session['rating_key'] == str(stream['rating_key']):
                            # The user is still playing the same media item
                            # Here we can check the play states
                            if session['state'] != stream['state']:
                                if session['state'] == 'paused':
                                    logger.debug(
                                        u"PlexPy Monitor :: Session %s has been paused."
                                        % stream['session_key'])

                                    # Check if any notification agents have notifications enabled
                                    if any(d['on_pause'] for d in notifiers.
                                           available_notification_agents()):
                                        # Push any notifications -
                                        # Push it on it's own thread so we don't hold up our db actions
                                        threading.Thread(
                                            target=notification_handler.notify,
                                            kwargs=dict(stream_data=stream,
                                                        notify_action='pause'
                                                        )).start()

                                if session['state'] == 'playing' and stream[
                                        'state'] == 'paused':
                                    logger.debug(
                                        u"PlexPy Monitor :: Session %s has been resumed."
                                        % stream['session_key'])

                                    # Check if any notification agents have notifications enabled
                                    if any(d['on_resume'] for d in notifiers.
                                           available_notification_agents()):
                                        # Push any notifications -
                                        # Push it on it's own thread so we don't hold up our db actions
                                        threading.Thread(
                                            target=notification_handler.notify,
                                            kwargs=dict(stream_data=stream,
                                                        notify_action='resume'
                                                        )).start()

                            if stream['state'] == 'paused' and not ws_request:
                                # The stream is still paused so we need to increment the paused_counter
                                # Using the set config parameter as the interval, probably not the most accurate but
                                # it will have to do for now. If it's a websocket request don't use this method.
                                paused_counter = int(
                                    stream['paused_counter']
                                ) + plexpy.CONFIG.MONITORING_INTERVAL
                                monitor_db.action(
                                    'UPDATE sessions SET paused_counter = ? '
                                    'WHERE session_key = ? AND rating_key = ?',
                                    [
                                        paused_counter, stream['session_key'],
                                        stream['rating_key']
                                    ])

                            if session[
                                    'state'] == 'buffering' and plexpy.CONFIG.BUFFER_THRESHOLD > 0:
                                # The stream is buffering so we need to increment the buffer_count
                                # We're going just increment on every monitor ping,
                                # would be difficult to keep track otherwise
                                monitor_db.action(
                                    'UPDATE sessions SET buffer_count = buffer_count + 1 '
                                    'WHERE session_key = ? AND rating_key = ?',
                                    [
                                        stream['session_key'],
                                        stream['rating_key']
                                    ])

                                # Check the current buffer count and last buffer to determine if we should notify
                                buffer_values = monitor_db.select(
                                    'SELECT buffer_count, buffer_last_triggered '
                                    'FROM sessions '
                                    'WHERE session_key = ? AND rating_key = ?',
                                    [
                                        stream['session_key'],
                                        stream['rating_key']
                                    ])

                                if buffer_values[0][
                                        'buffer_count'] >= plexpy.CONFIG.BUFFER_THRESHOLD:
                                    # Push any notifications -
                                    # Push it on it's own thread so we don't hold up our db actions
                                    # Our first buffer notification
                                    if buffer_values[0][
                                            'buffer_count'] == plexpy.CONFIG.BUFFER_THRESHOLD:
                                        logger.info(
                                            u"PlexPy Monitor :: User '%s' has triggered a buffer warning."
                                            % stream['user'])
                                        # Set the buffer trigger time
                                        monitor_db.action(
                                            'UPDATE sessions '
                                            'SET buffer_last_triggered = strftime("%s","now") '
                                            'WHERE session_key = ? AND rating_key = ?',
                                            [
                                                stream['session_key'],
                                                stream['rating_key']
                                            ])

                                        # Check if any notification agents have notifications enabled
                                        if any(d['on_buffer']
                                               for d in notifiers.
                                               available_notification_agents(
                                               )):
                                            # Push any notifications -
                                            # Push it on it's own thread so we don't hold up our db actions
                                            threading.Thread(
                                                target=notification_handler.
                                                notify,
                                                kwargs=dict(
                                                    stream_data=stream,
                                                    notify_action='buffer'
                                                )).start()
                                    else:
                                        # Subsequent buffer notifications after wait time
                                        if int(time.time()) > buffer_values[0]['buffer_last_triggered'] + \
                                                plexpy.CONFIG.BUFFER_WAIT:
                                            logger.info(
                                                u"PlexPy Monitor :: User '%s' has triggered multiple buffer warnings."
                                                % stream['user'])
                                            # Set the buffer trigger time
                                            monitor_db.action(
                                                'UPDATE sessions '
                                                'SET buffer_last_triggered = strftime("%s","now") '
                                                'WHERE session_key = ? AND rating_key = ?',
                                                [
                                                    stream['session_key'],
                                                    stream['rating_key']
                                                ])

                                            # Check if any notification agents have notifications enabled
                                            if any(d['on_buffer']
                                                   for d in notifiers.
                                                   available_notification_agents(
                                                   )):
                                                # Push any notifications -
                                                # Push it on it's own thread so we don't hold up our db actions
                                                threading.Thread(
                                                    target=notification_handler
                                                    .notify,
                                                    kwargs=dict(
                                                        stream_data=stream,
                                                        notify_action='buffer'
                                                    )).start()

                                logger.debug(
                                    u"PlexPy Monitor :: Session %s is buffering. Count is now %s. Last triggered %s."
                                    %
                                    (stream['session_key'],
                                     buffer_values[0]['buffer_count'],
                                     buffer_values[0]['buffer_last_triggered'])
                                )

                            # Check if the user has reached the offset in the media we defined as the "watched" percent
                            # Don't trigger if state is buffer as some clients push the progress to the end when
                            # buffering on start.
                            if session['view_offset'] and session[
                                    'duration'] and session[
                                        'state'] != 'buffering':
                                if helpers.get_percent(
                                        session['view_offset'],
                                        session['duration']
                                ) > plexpy.CONFIG.NOTIFY_WATCHED_PERCENT:
                                    # Check if any notification agents have notifications enabled
                                    if any(d['on_watched'] for d in notifiers.
                                           available_notification_agents()):
                                        # Push any notifications -
                                        # Push it on it's own thread so we don't hold up our db actions
                                        threading.Thread(
                                            target=notification_handler.notify,
                                            kwargs=dict(stream_data=stream,
                                                        notify_action='watched'
                                                        )).start()

                else:
                    # The user has stopped playing a stream
                    if stream['state'] != 'stopped':
                        logger.debug(
                            u"PlexPy Monitor :: Session %s has stopped." %
                            stream['session_key'])

                        # Set the stream stop time
                        stream['stopped'] = int(time.time())
                        monitor_db.action(
                            'UPDATE sessions SET stopped = ?, state = ? '
                            'WHERE session_key = ? AND rating_key = ?', [
                                stream['stopped'], 'stopped',
                                stream['session_key'], stream['rating_key']
                            ])

                        # Check if the user has reached the offset in the media we defined as the "watched" percent
                        if stream['view_offset'] and stream['duration']:
                            if helpers.get_percent(
                                    stream['view_offset'], stream['duration']
                            ) > plexpy.CONFIG.NOTIFY_WATCHED_PERCENT:
                                # Check if any notification agents have notifications enabled
                                if any(d['on_watched'] for d in notifiers.
                                       available_notification_agents()):
                                    # Push any notifications -
                                    # Push it on it's own thread so we don't hold up our db actions
                                    threading.Thread(
                                        target=notification_handler.notify,
                                        kwargs=dict(
                                            stream_data=stream,
                                            notify_action='watched')).start()

                        # Check if any notification agents have notifications enabled
                        if any(d['on_stop'] for d in
                               notifiers.available_notification_agents()):
                            # Push any notifications - Push it on it's own thread so we don't hold up our db actions
                            threading.Thread(
                                target=notification_handler.notify,
                                kwargs=dict(stream_data=stream,
                                            notify_action='stop')).start()

                    # Write the item history on playback stop
                    success = monitor_process.write_session_history(
                        session=stream)

                    if success:
                        # If session is written to the databaase successfully, remove the session from the session table
                        logger.debug(
                            u"PlexPy Monitor :: Removing sessionKey %s ratingKey %s from session queue"
                            % (stream['session_key'], stream['rating_key']))
                        monitor_db.action(
                            'DELETE FROM sessions WHERE session_key = ? AND rating_key = ?',
                            [stream['session_key'], stream['rating_key']])
                    else:
                        stream['write_attempts'] += 1

                        if stream[
                                'write_attempts'] < plexpy.CONFIG.SESSION_DB_WRITE_ATTEMPTS:
                            logger.warn(u"PlexPy Monitor :: Failed to write sessionKey %s ratingKey %s to the database. " \
                                        "Will try again on the next pass. Write attempt %s."
                                        % (stream['session_key'], stream['rating_key'], str(stream['write_attempts'])))
                            monitor_db.action(
                                'UPDATE sessions SET write_attempts = ? '
                                'WHERE session_key = ? AND rating_key = ?', [
                                    stream['write_attempts'],
                                    stream['session_key'], stream['rating_key']
                                ])
                        else:
                            logger.warn(u"PlexPy Monitor :: Failed to write sessionKey %s ratingKey %s to the database. " \
                                        "Removing session from the database. Write attempt %s."
                                        % (stream['session_key'], stream['rating_key'], str(stream['write_attempts'])))
                            logger.debug(
                                u"PlexPy Monitor :: Removing sessionKey %s ratingKey %s from session queue"
                                %
                                (stream['session_key'], stream['rating_key']))
                            monitor_db.action(
                                'DELETE FROM sessions WHERE session_key = ? AND rating_key = ?',
                                [stream['session_key'], stream['rating_key']])

            # Process the newly received session data
            for session in media_container:
                new_session = monitor_process.write_session(session)

                if new_session:
                    logger.debug(u"PlexPy Monitor :: Session %s has started." %
                                 session['session_key'])

        else:
            logger.debug(u"PlexPy Monitor :: Unable to read session list.")

            int_ping_count += 1
            logger.warn(u"PlexPy Monitor :: Unable to get an internal response from the server, ping attempt %s." \
                        % str(int_ping_count))

        if int_ping_count == 3:
            # Check if any notification agents have notifications enabled
            if any(d['on_intdown']
                   for d in notifiers.available_notification_agents()):
                # Fire off notifications
                threading.Thread(target=notification_handler.notify_timeline,
                                 kwargs=dict(notify_action='intdown')).start()
Exemplo n.º 9
0
    def process(self):
        if self.is_valid_session():
            ap = activity_processor.ActivityProcessor()
            db_session = ap.get_session_by_key(
                session_key=self.get_session_key())

            this_state = self.timeline['state']
            this_key = str(self.timeline['ratingKey'])

            # If we already have this session in the temp table, check for state changes
            if db_session:
                last_state = db_session['state']
                last_key = str(db_session['rating_key'])

                # Make sure the same item is being played
                if this_key == last_key:
                    # Update the session state and viewOffset
                    if this_state == 'playing':
                        ap.set_session_state(
                            session_key=self.get_session_key(),
                            state=this_state,
                            view_offset=self.timeline['viewOffset'])
                    # Start our state checks
                    if this_state != last_state:
                        if this_state == 'paused':
                            self.on_pause()
                        elif last_state == 'paused' and this_state == 'playing':
                            self.on_resume()
                        elif this_state == 'stopped':
                            self.on_stop()
                    elif this_state == 'buffering':
                        self.on_buffer()
                # If a client doesn't register stop events (I'm looking at you PHT!) check if the ratingKey has changed
                else:
                    # Manually stop and start
                    # Set force_stop so that we don't overwrite our last viewOffset
                    self.on_stop(force_stop=True)
                    self.on_start()

                # Monitor if the stream has reached the watch percentage for notifications
                # The only purpose of this is for notifications
                # Check if any notification agents have notifications enabled
                notify_agents = [
                    d['id'] for d in notifiers.available_notification_agents()
                    if d['on_watched']
                ]
                # Get the current states for notifications from our db
                notified_agents = [
                    d['agent_id']
                    for d in notification_handler.get_notify_state(
                        session=db_session) if d['notify_action'] == 'watched'
                ] if notify_agents else []

                if any(a not in notified_agents for a in notify_agents):
                    progress_percent = helpers.get_percent(
                        self.timeline['viewOffset'], db_session['duration'])
                    if progress_percent >= plexpy.CONFIG.NOTIFY_WATCHED_PERCENT and this_state != 'buffering':
                        # Rather not put this on it's own thread so we know it completes before our next event.
                        notification_handler.notify(stream_data=db_session,
                                                    notify_action='watched')

            else:
                # We don't have this session in our table yet, start a new one.
                if this_state != 'buffering':
                    self.on_start()
    def get_synced_items(self, machine_id=None, user_id=None):
        sync_list = self.get_plextv_sync_lists(machine_id)
        user_data = users.Users()

        synced_items = []

        try:
            xml_parse = minidom.parseString(sync_list)
        except Exception as e:
            logger.warn(
                u"PlexPy PlexTV :: Unable to parse XML for get_synced_items: %s"
                % e)
            return []
        except:
            logger.warn(
                u"PlexPy PlexTV :: Unable to parse XML for get_synced_items.")
            return []

        xml_head = xml_parse.getElementsByTagName('SyncList')

        if not xml_head:
            logger.warn(
                u"PlexPy PlexTV :: Unable to parse XML for get_synced_items.")
        else:
            for a in xml_head:
                client_id = helpers.get_xml_attr(a, 'id')
                sync_device = a.getElementsByTagName('Device')
                for device in sync_device:
                    device_user_id = helpers.get_xml_attr(device, 'userID')
                    try:
                        device_username = user_data.get_details(
                            user_id=device_user_id)['username']
                        device_friendly_name = user_data.get_details(
                            user_id=device_user_id)['friendly_name']
                    except:
                        device_username = ''
                        device_friendly_name = ''
                    device_name = helpers.get_xml_attr(device, 'name')
                    device_product = helpers.get_xml_attr(device, 'product')
                    device_product_version = helpers.get_xml_attr(
                        device, 'productVersion')
                    device_platform = helpers.get_xml_attr(device, 'platform')
                    device_platform_version = helpers.get_xml_attr(
                        device, 'platformVersion')
                    device_type = helpers.get_xml_attr(device, 'device')
                    device_model = helpers.get_xml_attr(device, 'model')
                    device_last_seen = helpers.get_xml_attr(
                        device, 'lastSeenAt')

                # Filter by user_id
                if user_id and user_id != device_user_id:
                    continue

                for synced in a.getElementsByTagName('SyncItems'):
                    sync_item = synced.getElementsByTagName('SyncItem')
                    for item in sync_item:
                        sync_id = helpers.get_xml_attr(item, 'id')
                        sync_version = helpers.get_xml_attr(item, 'version')
                        sync_root_title = helpers.get_xml_attr(
                            item, 'rootTitle')
                        sync_title = helpers.get_xml_attr(item, 'title')
                        sync_metadata_type = helpers.get_xml_attr(
                            item, 'metadataType')
                        sync_content_type = helpers.get_xml_attr(
                            item, 'contentType')

                        for status in item.getElementsByTagName('Status'):
                            status_failure_code = helpers.get_xml_attr(
                                status, 'failureCode')
                            status_failure = helpers.get_xml_attr(
                                status, 'failure')
                            status_state = helpers.get_xml_attr(
                                status, 'state')
                            status_item_count = helpers.get_xml_attr(
                                status, 'itemsCount')
                            status_item_complete_count = helpers.get_xml_attr(
                                status, 'itemsCompleteCount')
                            status_item_downloaded_count = helpers.get_xml_attr(
                                status, 'itemsDownloadedCount')
                            status_item_ready_count = helpers.get_xml_attr(
                                status, 'itemsReadyCount')
                            status_item_successful_count = helpers.get_xml_attr(
                                status, 'itemsSuccessfulCount')
                            status_total_size = helpers.get_xml_attr(
                                status, 'totalSize')
                            status_item_download_percent_complete = helpers.get_percent(
                                status_item_downloaded_count,
                                status_item_count)

                        for settings in item.getElementsByTagName(
                                'MediaSettings'):
                            settings_audio_boost = helpers.get_xml_attr(
                                settings, 'audioBoost')
                            settings_music_bitrate = helpers.get_xml_attr(
                                settings, 'musicBitrate')
                            settings_photo_quality = helpers.get_xml_attr(
                                settings, 'photoQuality')
                            settings_photo_resolution = helpers.get_xml_attr(
                                settings, 'photoResolution')
                            settings_video_quality = helpers.get_xml_attr(
                                settings, 'videoQuality')
                            settings_video_resolution = helpers.get_xml_attr(
                                settings, 'videoResolution')

                        for location in item.getElementsByTagName('Location'):
                            clean_uri = helpers.get_xml_attr(
                                location, 'uri').split('%2F')

                        rating_key = next(
                            (clean_uri[(idx + 1) % len(clean_uri)]
                             for idx, item in enumerate(clean_uri)
                             if item == 'metadata'), None)

                        sync_details = {
                            "device_name": helpers.sanitize(device_name),
                            "platform": helpers.sanitize(device_platform),
                            "username": helpers.sanitize(device_username),
                            "friendly_name":
                            helpers.sanitize(device_friendly_name),
                            "user_id": device_user_id,
                            "root_title": helpers.sanitize(sync_root_title),
                            "title": helpers.sanitize(sync_title),
                            "metadata_type": sync_metadata_type,
                            "content_type": sync_content_type,
                            "rating_key": rating_key,
                            "state": status_state,
                            "item_count": status_item_count,
                            "item_complete_count": status_item_complete_count,
                            "item_downloaded_count":
                            status_item_downloaded_count,
                            "item_downloaded_percent_complete":
                            status_item_download_percent_complete,
                            "music_bitrate": settings_music_bitrate,
                            "photo_quality": settings_photo_quality,
                            "video_quality": settings_video_quality,
                            "total_size": status_total_size,
                            "failure": status_failure,
                            "sync_id": sync_id
                        }

                        synced_items.append(sync_details)

        return session.filter_session_info(synced_items, filter_key='user_id')
Exemplo n.º 11
0
    def get_synced_items(self,
                         machine_id=None,
                         client_id_filter=None,
                         user_id_filter=None,
                         rating_key_filter=None,
                         sync_id_filter=None):

        if not machine_id:
            machine_id = plexpy.CONFIG.PMS_IDENTIFIER

        if isinstance(rating_key_filter, list):
            rating_key_filter = [str(k) for k in rating_key_filter]
        elif rating_key_filter:
            rating_key_filter = [str(rating_key_filter)]

        if isinstance(user_id_filter, list):
            user_id_filter = [str(k) for k in user_id_filter]
        elif user_id_filter:
            user_id_filter = [str(user_id_filter)]

        sync_list = self.get_plextv_sync_lists(machine_id, output_format='xml')
        user_data = users.Users()

        synced_items = []

        try:
            xml_head = sync_list.getElementsByTagName('SyncList')
        except Exception as e:
            logger.warn(
                "Tautulli PlexTV :: Unable to parse XML for get_synced_items: %s."
                % e)
            return {}

        for a in xml_head:
            client_id = helpers.get_xml_attr(a, 'clientIdentifier')

            # Filter by client_id
            if client_id_filter and str(client_id_filter) != client_id:
                continue

            sync_list_id = helpers.get_xml_attr(a, 'id')
            sync_device = a.getElementsByTagName('Device')

            for device in sync_device:
                device_user_id = helpers.get_xml_attr(device, 'userID')
                try:
                    device_username = user_data.get_details(
                        user_id=device_user_id)['username']
                    device_friendly_name = user_data.get_details(
                        user_id=device_user_id)['friendly_name']
                except:
                    device_username = ''
                    device_friendly_name = ''
                device_name = helpers.get_xml_attr(device, 'name')
                device_product = helpers.get_xml_attr(device, 'product')
                device_product_version = helpers.get_xml_attr(
                    device, 'productVersion')
                device_platform = helpers.get_xml_attr(device, 'platform')
                device_platform_version = helpers.get_xml_attr(
                    device, 'platformVersion')
                device_type = helpers.get_xml_attr(device, 'device')
                device_model = helpers.get_xml_attr(device, 'model')
                device_last_seen = helpers.get_xml_attr(device, 'lastSeenAt')

            # Filter by user_id
            if user_id_filter and device_user_id not in user_id_filter:
                continue

            for synced in a.getElementsByTagName('SyncItems'):
                sync_item = synced.getElementsByTagName('SyncItem')
                for item in sync_item:

                    sync_media_type = None
                    rating_key = None
                    for location in item.getElementsByTagName('Location'):
                        location_uri = unquote(
                            helpers.get_xml_attr(location, 'uri'))

                        if location_uri.startswith('library://'):
                            if 'collection' in location_uri:
                                sync_media_type = 'collection'
                            clean_uri = location_uri.split('/')
                            rating_key = next(
                                (j
                                 for i, j in zip(clean_uri[:-1], clean_uri[1:])
                                 if i in ('metadata', 'collections')), None)

                        elif location_uri.startswith('playlist://'):
                            sync_media_type = 'playlist'
                            tokens = users.Users().get_tokens(
                                user_id=device_user_id)
                            if tokens['server_token']:
                                plex = Plex(token=tokens['server_token'])
                                for playlist in plex.PlexServer.playlists():
                                    if location_uri.endswith(playlist.guid):
                                        rating_key = str(
                                            playlist.ratingKey
                                        )  # String for backwards consistency

                    # Filter by rating_key
                    if rating_key_filter and rating_key not in rating_key_filter:
                        continue

                    sync_id = helpers.get_xml_attr(item, 'id')

                    # Filter by sync_id
                    if sync_id_filter and str(sync_id_filter) != sync_id:
                        continue

                    sync_version = helpers.get_xml_attr(item, 'version')
                    sync_root_title = helpers.get_xml_attr(item, 'rootTitle')
                    sync_title = helpers.get_xml_attr(item, 'title')
                    sync_metadata_type = helpers.get_xml_attr(
                        item, 'metadataType')
                    sync_content_type = helpers.get_xml_attr(
                        item, 'contentType')

                    for status in item.getElementsByTagName('Status'):
                        status_failure_code = helpers.get_xml_attr(
                            status, 'failureCode')
                        status_failure = helpers.get_xml_attr(
                            status, 'failure')
                        status_state = helpers.get_xml_attr(status, 'state')
                        status_item_count = helpers.get_xml_attr(
                            status, 'itemsCount')
                        status_item_complete_count = helpers.get_xml_attr(
                            status, 'itemsCompleteCount')
                        status_item_downloaded_count = helpers.get_xml_attr(
                            status, 'itemsDownloadedCount')
                        status_item_ready_count = helpers.get_xml_attr(
                            status, 'itemsReadyCount')
                        status_item_successful_count = helpers.get_xml_attr(
                            status, 'itemsSuccessfulCount')
                        status_total_size = helpers.get_xml_attr(
                            status, 'totalSize')
                        status_item_download_percent_complete = helpers.get_percent(
                            status_item_downloaded_count, status_item_count)

                    for settings in item.getElementsByTagName('MediaSettings'):
                        settings_video_bitrate = helpers.get_xml_attr(
                            settings, 'maxVideoBitrate')
                        settings_video_quality = helpers.get_xml_attr(
                            settings, 'videoQuality')
                        settings_video_resolution = helpers.get_xml_attr(
                            settings, 'videoResolution')
                        settings_audio_boost = helpers.get_xml_attr(
                            settings, 'audioBoost')
                        settings_audio_bitrate = helpers.get_xml_attr(
                            settings, 'musicBitrate')
                        settings_photo_quality = helpers.get_xml_attr(
                            settings, 'photoQuality')
                        settings_photo_resolution = helpers.get_xml_attr(
                            settings, 'photoResolution')

                    sync_details = {
                        "device_name": device_name,
                        "platform": device_platform,
                        "user_id": device_user_id,
                        "user": device_friendly_name,
                        "username": device_username,
                        "root_title": sync_root_title,
                        "sync_title": sync_title,
                        "metadata_type": sync_metadata_type,
                        "content_type": sync_content_type,
                        "rating_key": rating_key,
                        "state": status_state,
                        "item_count": status_item_count,
                        "item_complete_count": status_item_complete_count,
                        "item_downloaded_count": status_item_downloaded_count,
                        "item_downloaded_percent_complete":
                        status_item_download_percent_complete,
                        "video_bitrate": settings_video_bitrate,
                        "audio_bitrate": settings_audio_bitrate,
                        "photo_quality": settings_photo_quality,
                        "video_quality": settings_video_quality,
                        "total_size": status_total_size,
                        "failure": status_failure,
                        "client_id": client_id,
                        "sync_id": sync_id,
                        "sync_media_type": sync_media_type
                    }

                    synced_items.append(sync_details)

        return session.filter_session_info(synced_items, filter_key='user_id')