async def _async_control_heating(self, time=None, force=False):
"""Check if we need to turn heating on or off."""
async with self._temp_lock:
if not self._active and None not in (self._cur_temp,
self._target_temp):
self._active = True
_LOGGER.info("Obtained current and target temperature. "
"Generic thermostat active. %s, %s",
self._cur_temp, self._target_temp)
if not self._active or self._hvac_mode == HVAC_MODE_OFF:
return
if not force and time is None:
# If the `force` argument is True, we
# ignore `min_cycle_duration`.
# If the `time` argument is not none, we were invoked for
# keep-alive purposes, and `min_cycle_duration` is irrelevant.
if self.min_cycle_duration:
if self._is_device_active:
current_state = STATE_ON
else:
current_state = HVAC_MODE_OFF
if (self._hvac_mode == HVAC_MODE_COOL):
long_enough = condition.state(
self.hass, self.cooler_entity_id, current_state,
self.min_cycle_duration)
elif (self._hvac_mode == HVAC_MODE_HEAT):
long_enough = condition.state(
self.hass, self.heater_entity_id, current_state,
self.min_cycle_duration)
if not long_enough:
return
too_cold = \
self._target_temp - self._cur_temp >= self._tolerance
too_hot = \
self._cur_temp - self._target_temp >= self._tolerance
if self._is_device_active:
if (self._hvac_mode == HVAC_MODE_COOL and too_cold) or (self._hvac_mode == HVAC_MODE_HEAT and too_hot):
_LOGGER.info("Turning off HVAC")
await self._async_turn_off()
elif time is not None:
# The time argument is passed only in keep-alive case
if (self._hvac_mode == HVAC_MODE_COOL):
await self._async_cooler_turn_on()
elif (self._hvac_mode == HVAC_MODE_HEAT):
await self._async_heater_turn_on()
else:
if (self._hvac_mode == HVAC_MODE_COOL and too_hot):
_LOGGER.info("Turning on cooler %s", self.cooler_entity_id)
await self._async_cooler_turn_on()
elif (self._hvac_mode == HVAC_MODE_HEAT and too_cold):
_LOGGER.info("Turning on heater %s", self.heater_entity_id)
await self._async_heater_turn_on()
elif time is not None:
# The time argument is passed only in keep-alive case
await self._async_turn_off()
async def test_state_raises(hass):
"""Test that state raises ConditionError on errors."""
# No entity
with pytest.raises(ConditionError, match="no entity"):
condition.state(hass, entity=None, req_state="missing")
# Unknown entities
test = await condition.async_from_config(
hass,
{
"condition": "state",
"entity_id": ["sensor.door_unknown", "sensor.window_unknown"],
"state": "open",
},
)
with pytest.raises(ConditionError, match="unknown entity.*door"):
test(hass)
with pytest.raises(ConditionError, match="unknown entity.*window"):
test(hass)
# Unknown attribute
with pytest.raises(ConditionError, match=r"attribute .* does not exist"):
test = await condition.async_from_config(
hass,
{
"condition": "state",
"entity_id": "sensor.door",
"attribute": "model",
"state": "acme",
},
)
hass.states.async_set("sensor.door", "open")
test(hass)
# Unknown state entity
with pytest.raises(ConditionError, match="input_text.missing"):
test = await condition.async_from_config(
hass,
{
"condition": "state",
"entity_id": "sensor.door",
"state": "input_text.missing",
},
)
hass.states.async_set("sensor.door", "open")
test(hass)
def test_is_state(hass: HomeAssistant,
variables: TemplateVarsType) -> bool:
"""Test if an entity is a certain state."""
result = condition.state(hass, config[ATTR_ENTITY_ID], STATE_HOME)
if reverse:
result = not result
return result
async def _async_control_humidification(self, time=None, force=False):
"""Check if we need to turn humidification on or off."""
async with self._humidity_lock:
if not self._active and None not in (self._cur_humidity,
self._target_humidity):
self._active = True
_LOGGER.info(
"Obtained current and target humidity. "
"Generic hygrostat active. %s, %s",
self._cur_humidity,
self._target_humidity,
)
if not self._active or self._hvac_mode == HVAC_MODE_FAN_ONLY or self._hvac_mode == HVAC_MODE_OFF:
return
if not force and time is None:
# If the `force` argument is True, we
# ignore `min_cycle_duration`.
# If the `time` argument is not none, we were invoked for
# keep-alive purposes, and `min_cycle_duration` is irrelevant.
if self.min_cycle_duration:
if self._is_device_active:
current_state = STATE_ON
else:
current_state = HVAC_MODE_OFF
long_enough = condition.state(
self.hass,
self.dryer_entity_id,
current_state,
self.min_cycle_duration,
)
if not long_enough:
return
too_dry = self._target_humidity >= self._cur_humidity + self._dry_tolerance
too_moist = self._cur_humidity >= self._target_humidity + self._moist_tolerance
if self._is_device_active:
if (self.moist_mode and too_moist) or (not self.moist_mode
and too_dry):
_LOGGER.info("Turning off dryer %s", self.dryer_entity_id)
await self._async_dryer_turn_off()
elif time is not None:
# The time argument is passed only in keep-alive case
_LOGGER.info(
"Keep-alive - Turning on dryer %s",
self.dryer_entity_id,
)
await self._async_dryer_turn_on()
else:
if (self.moist_mode and too_dry) or (not self.moist_mode
and too_moist):
_LOGGER.info("Turning on dryer %s", self.dryer_entity_id)
await self._async_dryer_turn_on()
elif time is not None:
# The time argument is passed only in keep-alive case
_LOGGER.info("Keep-alive - Turning off dryer %s",
self.dryer_entity_id)
await self._async_dryer_turn_off()
def _process_state(self, entity_observation):
"""Add entity to current observations if state conditions are met."""
entity = entity_observation['entity_id']
should_trigger = condition.state(
self.hass, entity, entity_observation.get('to_state'))
self._update_current_obs(entity_observation, should_trigger)
def is_active_long_enough(self, mode=None):
""" This function is to check if the heater/cooler has been active long enough """
if not self.min_cycle_duration:
return True
if self._is_device_active:
current_state = STATE_ON
else:
current_state = STATE_OFF
if mode == "heat":
for entity in self.heaters_entity_ids:
return condition.state(self.hass, entity, current_state, self.min_cycle_duration)
elif mode == "cool":
for entity in self.coolers_entity_ids:
return condition.state(self.hass, entity, current_state, self.min_cycle_duration)
else:
_LOGGER.error("Wrong mode have been passed to function is_active_long_enough")
return True
def _process_state(self, entity_observation):
"""Return True if state conditions are met."""
entity = entity_observation["entity_id"]
should_trigger = condition.state(self.hass, entity,
entity_observation.get("to_state"))
return should_trigger
def _process_state(self, entity_observation):
"""Add entity to current observations if state conditions are met."""
entity = entity_observation["entity_id"]
should_trigger = condition.state(self.hass, entity,
entity_observation.get("to_state"))
self._update_current_obs(entity_observation, should_trigger)
def _process_state(self, entity_observation):
"""Return True if state conditions are met."""
entity = entity_observation["entity_id"]
try:
return condition.state(self.hass, entity,
entity_observation.get("to_state"))
except ConditionError:
return False
def _async_control_heating(self):
"""Check if we need to turn heating on or off."""
if not self._active and None not in (self._cur_temp,
self._target_temp):
self._active = True
_LOGGER.info(
"Obtained current and target temperature. "
"Generic thermostat active. %s, %s", self._cur_temp,
self._target_temp)
if not self._active:
return
if not self._enabled:
return
if self.min_cycle_duration:
if self._is_device_active:
current_state = STATE_ON
else:
current_state = STATE_OFF
long_enough = condition.state(self.hass, self.heater_entity_id,
current_state,
self.min_cycle_duration)
if not long_enough:
return
if self.ac_mode:
is_cooling = self._is_device_active
if is_cooling:
too_cold = self._target_temp - self._cur_temp >= \
self._cold_tolerance
if too_cold:
_LOGGER.info("Turning off AC %s", self.heater_entity_id)
self._heater_turn_off()
else:
too_hot = self._cur_temp - self._target_temp >= \
self._hot_tolerance
if too_hot:
_LOGGER.info("Turning on AC %s", self.heater_entity_id)
self._heater_turn_on()
else:
is_heating = self._is_device_active
if is_heating:
too_hot = self._cur_temp - self._target_temp >= \
self._hot_tolerance
if too_hot:
_LOGGER.info("Turning off heater %s",
self.heater_entity_id)
self._heater_turn_off()
else:
too_cold = self._target_temp - self._cur_temp >= \
self._cold_tolerance
if too_cold:
_LOGGER.info("Turning on heater %s", self.heater_entity_id)
self._heater_turn_on()
def test_is_state(hass: HomeAssistant, variables: TemplateVarsType):
""" Test thumbnail state """
return condition.state(
hass,
entity_id,
state,
for_period,
attribute,
)
def _async_control_heating(self):
"""Check if we need to turn heating on or off."""
if not self._active and None not in (self._cur_temp,
self._target_temp):
self._active = True
_LOGGER.info("Obtained current and target temperature. "
"Generic thermostat active. %s, %s",
self._cur_temp, self._target_temp)
if not self._active:
return
if not self._enabled:
return
if self.min_cycle_duration:
if self._is_device_active:
current_state = STATE_ON
else:
current_state = STATE_OFF
long_enough = condition.state(
self.hass, self.heater_entity_id, current_state,
self.min_cycle_duration)
if not long_enough:
return
if self.ac_mode:
is_cooling = self._is_device_active
if is_cooling:
too_cold = self._target_temp - self._cur_temp >= \
self._cold_tolerance
if too_cold:
_LOGGER.info("Turning off AC %s", self.heater_entity_id)
self._heater_turn_off()
else:
too_hot = self._cur_temp - self._target_temp >= \
self._hot_tolerance
if too_hot:
_LOGGER.info("Turning on AC %s", self.heater_entity_id)
self._heater_turn_on()
else:
is_heating = self._is_device_active
if is_heating:
too_hot = self._cur_temp - self._target_temp >= \
self._hot_tolerance
if too_hot:
_LOGGER.info("Turning off heater %s",
self.heater_entity_id)
self._heater_turn_off()
else:
too_cold = self._target_temp - self._cur_temp >= \
self._cold_tolerance
if too_cold:
_LOGGER.info("Turning on heater %s", self.heater_entity_id)
self._heater_turn_on()
def test_is_state(hass: HomeAssistant,
variables: TemplateVarsType) -> bool:
"""Test if an entity is a certain state."""
return condition.state(
hass,
config[ATTR_ENTITY_ID],
"linked",
attribute=config[CONF_TYPE][:-len(
"_linked"
)], # Condition names are attribute + _linked. Bit hacky, TODO: replace with removesuffix in Python 3.9
)
async def _async_control_heat_cool(self, time=None, force=False):
"""Check if we need to turn heating on or off."""
async with self._temp_lock:
if not self._active and None not in (
self._cur_temp,
self._target_temp_high,
self._target_temp_low,
):
self._active = True
if not self._active or self._hvac_mode == HVAC_MODE_OFF:
return
if not force and time is None:
# If the `force` argument is True, we
# ignore `min_cycle_duration`.
# If the `time` argument is not none, we were invoked for
# keep-alive purposes, and `min_cycle_duration` is irrelevant.
if self.min_cycle_duration:
if self._is_device_active:
current_state = STATE_ON
else:
current_state = HVAC_MODE_OFF
long_enough = condition.state(
self.hass,
self.heater_entity_id,
self.cooler_entity_id,
current_state,
self.min_cycle_duration,
)
if not long_enough:
return
too_cold = self._target_temp_low >= self._cur_temp + self._cold_tolerance
too_hot = self._cur_temp >= self._target_temp_high + self._hot_tolerance
if self._is_opening_open:
await self._async_heater_turn_off()
await self._async_cooler_turn_off()
elif self._is_floor_hot:
await self._async_heater_turn_off()
else:
await self.async_heater_cooler_toggle(too_cold, too_hot)
if time is not None:
# The time argument is passed only in keep-alive case
_LOGGER.info(
"Keep-alive - Toggling on heater cooler %s, %s",
self.heater_entity_id,
self.cooler_entity_id,
)
await self.async_heater_cooler_toggle(too_cold, too_hot)
async def _async_control_heating(self, time=None, force=False):
"""Check if we need to turn heating on or off."""
async with self._temp_lock:
if not self._active and None not in (self._cur_temp,
self._target_temp):
self._active = True
_LOGGER.info("Obtained current and target temperature. "
"Generic thermostat active. %s, %s",
self._cur_temp, self._target_temp)
if not self._active or not self._enabled:
return
if not force and time is None:
# If the `force` argument is True, we
# ignore `min_cycle_duration`.
# If the `time` argument is not none, we were invoked for
# keep-alive purposes, and `min_cycle_duration` is irrelevant.
if self.min_cycle_duration:
if self._is_device_active:
current_state = STATE_ON
else:
current_state = STATE_OFF
long_enough = condition.state(
self.hass, self.heater_entity_id, current_state,
self.min_cycle_duration)
if not long_enough:
return
too_cold = \
self._target_temp - self._cur_temp >= self._cold_tolerance
too_hot = \
self._cur_temp - self._target_temp >= self._hot_tolerance
if self._is_device_active:
if (self.ac_mode and too_cold) or \
(not self.ac_mode and too_hot):
_LOGGER.info("Turning off heater %s",
self.heater_entity_id)
await self._async_heater_turn_off()
elif time is not None:
# The time argument is passed only in keep-alive case
await self._async_heater_turn_on()
else:
if (self.ac_mode and too_hot) or \
(not self.ac_mode and too_cold):
_LOGGER.info("Turning on heater %s", self.heater_entity_id)
await self._async_heater_turn_on()
elif time is not None:
# The time argument is passed only in keep-alive case
await self._async_heater_turn_off()
async def _async_control_heating(self, time=None):
"""Check if we need to turn heating on or off."""
async with self._temp_lock:
if not self._active and None not in (self._cur_temp,
self._target_temp):
self._active = True
_LOGGER.info(
"Obtained current and target temperature. "
"Generic thermostat active. %s, %s", self._cur_temp,
self._target_temp)
if not self._active or not self._enabled:
return
if self.min_cycle_duration:
if self._is_device_active:
current_state = STATE_ON
else:
current_state = STATE_OFF
long_enough = condition.state(self.hass, self.heater_entity_id,
current_state,
self.min_cycle_duration)
if not long_enough:
return
too_cold = \
self._target_temp - self._cur_temp >= self._cold_tolerance
too_hot = \
self._cur_temp - self._target_temp >= self._hot_tolerance
if self._is_device_active:
if (self.ac_mode and too_cold) or \
(not self.ac_mode and too_hot):
_LOGGER.info("Turning off heater %s",
self.heater_entity_id)
await self._async_heater_turn_off()
elif time is not None:
# The time argument is passed only in keep-alive case
await self._async_heater_turn_on()
else:
if (self.ac_mode and too_hot) or \
(not self.ac_mode and too_cold):
_LOGGER.info("Turning on heater %s", self.heater_entity_id)
await self._async_heater_turn_on()
elif time is not None:
# The time argument is passed only in keep-alive case
await self._async_heater_turn_off()
def _control_heating(self):
"""Check if we need to turn heating on or off."""
if not self._active and None not in (self._cur_temp,
self._target_temp):
self._active = True
_LOGGER.info('Obtained current and target temperature. '
'Generic thermostat active.')
if not self._active:
return
if self.min_cycle_duration:
if self._is_device_active:
current_state = STATE_ON
else:
current_state = STATE_OFF
long_enough = condition.state(self.hass, self.heater_entity_id,
current_state,
self.min_cycle_duration)
if not long_enough:
return
if self.ac_mode:
too_hot = self._cur_temp - self._target_temp > self._tolerance
is_cooling = self._is_device_active
if too_hot and not is_cooling:
_LOGGER.info('Turning on AC %s', self.heater_entity_id)
switch.turn_on(self.hass, self.heater_entity_id)
elif not too_hot and is_cooling:
_LOGGER.info('Turning off AC %s', self.heater_entity_id)
switch.turn_off(self.hass, self.heater_entity_id)
else:
too_cold = self._target_temp - self._cur_temp > self._tolerance
is_heating = self._is_device_active
if too_cold and not is_heating:
_LOGGER.info('Turning on heater %s', self.heater_entity_id)
switch.turn_on(self.hass, self.heater_entity_id)
elif not too_cold and is_heating:
_LOGGER.info('Turning off heater %s', self.heater_entity_id)
switch.turn_off(self.hass, self.heater_entity_id)
def _control_heating(self):
"""Check if we need to turn heating on or off."""
if not self._active and None not in (self._cur_temp,
self._target_temp):
self._active = True
_LOGGER.info('Obtained current and target temperature. '
'Generic thermostat active.')
if not self._active:
return
if self.min_cycle_duration:
if self._is_device_active:
current_state = STATE_ON
else:
current_state = STATE_OFF
long_enough = condition.state(self.hass, self.heater_entity_id,
current_state,
self.min_cycle_duration)
if not long_enough:
return
if self.ac_mode:
too_hot = self._cur_temp - self._target_temp > TOL_TEMP
is_cooling = self._is_device_active
if too_hot and not is_cooling:
_LOGGER.info('Turning on AC %s', self.heater_entity_id)
switch.turn_on(self.hass, self.heater_entity_id)
elif not too_hot and is_cooling:
_LOGGER.info('Turning off AC %s', self.heater_entity_id)
switch.turn_off(self.hass, self.heater_entity_id)
else:
too_cold = self._target_temp - self._cur_temp > TOL_TEMP
is_heating = self._is_device_active
if too_cold and not is_heating:
_LOGGER.info('Turning on heater %s', self.heater_entity_id)
switch.turn_on(self.hass, self.heater_entity_id)
elif not too_cold and is_heating:
_LOGGER.info('Turning off heater %s', self.heater_entity_id)
switch.turn_off(self.hass, self.heater_entity_id)
async def _async_control_heating(self, time=None, force=False):
"""Check if we need to turn heating on or off."""
async with self._temp_lock:
if not self._active and None not in (self._cur_temp,
self._target_temp):
self._active = True
_LOGGER.info(
"Obtained current and target temperature. "
"Generic Dual-mode thermostat active. %s, %s",
self._cur_temp,
self._target_temp,
)
if not self._active or self._hvac_mode == HVAC_MODE_OFF:
return
# This variable is used for the long_enough condition and for the LOG Messages
if not force and time is None:
# If the `force` argument is True, we
# ignore `min_cycle_duration`.
# If the `time` argument is not none, we were invoked for
# keep-alive purposes, and `min_cycle_duration` is irrelevant.
if self.min_cycle_duration:
if self._hvac_mode == HVAC_MODE_COOL:
active_entity = self.cooler_entity_id
if self._hvac_mode == HVAC_MODE_HEAT:
active_entity = self.heater_entity_id
if self._hvac_mode == HVAC_MODE_FAN_ONLY:
active_entity = self.fan_entity_id
if self._hvac_mode == HVAC_MODE_DRY:
active_entity = self.dryer_entity_id
if self._is_device_active:
current_state = STATE_ON
else:
current_state = HVAC_MODE_OFF
long_enough = condition.state(
self.hass,
active_entity,
current_state,
self.min_cycle_duration,
)
if not long_enough:
return
too_cold = self._target_temp >= self._cur_temp + self._cold_tolerance
too_hot = self._cur_temp >= self._target_temp + self._hot_tolerance
if self._is_device_active: # when to turn off
if too_cold and self._hvac_mode == HVAC_MODE_COOL:
_LOGGER.info("Turning off cooler %s",
self.cooler_entity_id)
await self._async_cooler_turn_off()
elif too_hot and self._hvac_mode == HVAC_MODE_HEAT:
_LOGGER.info("Turning off heater %s",
self.heater_entity_id)
await self._async_heater_turn_off()
elif self._hvac_mode == HVAC_MODE_FAN_ONLY:
if too_cold and self.fan_behavior == FAN_MODE_COOL:
_LOGGER.info("Turning off fan %s", self.fan_entity_id)
await self._async_fan_turn_off()
elif too_hot and self.fan_behavior == FAN_MODE_HEAT:
_LOGGER.info("Turning off fan %s", self.fan_entity_id)
await self._async_fan_turn_off()
elif self._hvac_mode == HVAC_MODE_DRY:
if too_cold and self.dryer_behavior == DRYER_MODE_COOL:
_LOGGER.info("Turning off dehumidifier %s",
self.dryer_entity_id)
await self._async_dryer_turn_off()
elif too_hot and self.dryer_behavior == DRYER_MODE_HEAT:
_LOGGER.info("Turning off dehumidifier %s",
self.dryer_entity_id)
await self._async_dryer_turn_off()
elif time is not None:
# The time argument is passed only in keep-alive case
_LOGGER.info("Keep-alive - Turning on heater %s",
active_entity)
if self._hvac_mode == HVAC_MODE_COOL:
await self._async_cooler_turn_on()
elif self._hvac_mode == HVAC_MODE_HEAT:
await self._async_heater_turn_on()
elif self._hvac_mode == HVAC_MODE_FAN_ONLY:
await self._async_fan_turn_on()
elif self._hvac_mode == HVAC_MODE_DRY:
await self._async_dryer_turn_on()
else: # when to turn on
if too_hot and self._hvac_mode == HVAC_MODE_COOL:
_LOGGER.info("Turning on cooler %s", self.cooler_entity_id)
await self._async_cooler_turn_on()
elif too_cold and self._hvac_mode == HVAC_MODE_HEAT:
_LOGGER.info("Turning on heater %s", self.heater_entity_id)
await self._async_heater_turn_on()
elif self._hvac_mode == HVAC_MODE_FAN_ONLY:
if too_hot and self.fan_behavior == FAN_MODE_COOL:
_LOGGER.info("Turning on fan %s", self.fan_entity_id)
await self._async_fan_turn_on()
elif too_cold and self.fan_behavior == FAN_MODE_HEAT:
_LOGGER.info("Turning on fan %s", self.fan_entity_id)
await self._async_fan_turn_on()
elif self._hvac_mode == HVAC_MODE_DRY:
if too_hot and self.dryer_behavior == DRYER_MODE_COOL:
_LOGGER.info("Turning on dehumidifier %s",
self.dryer_entity_id)
await self._async_dryer_turn_on()
elif too_cold and self.dryer_behavior == DRYER_MODE_HEAT:
_LOGGER.info("Turning on dehumidifier %s",
self.dryer_entity_id)
await self._async_dryer_turn_on()
elif time is not None:
# The time argument is passed only in keep-alive case
_LOGGER.info("Keep-alive - Turning off heater %s",
active_entity)
if self._hvac_mode == HVAC_MODE_COOL:
await self._async_cooler_turn_off()
elif self._hvac_mode == HVAC_MODE_HEAT:
await self._async_heater_turn_off()
elif self._hvac_mode == HVAC_MODE_FAN_ONLY:
await self._async_fan_turn_off()
elif self._hvac_mode == HVAC_MODE_DRY:
await self._async_dryer_turn_off()
if self.fan_behavior == FAN_MODE_NEUTRAL and self._hvac_mode == HVAC_MODE_FAN_ONLY:
await self._async_fan_turn_on()
if self.dryer_behavior == DRYER_MODE_NEUTRAL and self._hvac_mode == HVAC_MODE_DRY:
await self._async_dryer_turn_on()
def _async_control_heating(self):
"""Check if we need to turn heating on or off."""
if not self._active and None not in (self._cur_temp,
self._target_temp):
self._active = True
_LOGGER.info('Obtained current and target temperature. '
'Generic thermostat active.')
if not self._active:
return
if not self._enabled:
return
if self.min_cycle_duration:
if self._is_device_active:
current_state = STATE_ON
else:
current_state = STATE_OFF
long_enough = condition.state(self.hass, self.heater_entity_id,
current_state,
self.min_cycle_duration)
if not long_enough:
return
if self.ac_mode:
is_cooling = self._is_device_active
#if is_cooling:
#too_cold = self._target_temp - self._cur_temp >= \
#self._cold_tolerance
#if too_cold:
#_LOGGER.info('Turning off AC %s', self.heater_entity_id)
#self._heater_turn_off()
#else:
#too_hot = self._cur_temp - self._target_temp >= \
#self._hot_tolerance
#if too_hot:
#_LOGGER.info('Turning on AC %s', self.heater_entity_id)
#self._heater_turn_on()
else:
is_heating = self._is_device_active
if self._target_temp < self._min_heating_temp: # or operation mode is off
if is_heating:
_LOGGER.info('Turning of heatpump {0}'.format(
self.heater_entity_id))
self._heatpump_set_mode('OFF')
else:
return
elif is_heating:
too_hot = self._cur_temp - self._target_temp >= \
self._hot_tolerance
if too_hot:
_LOGGER.info('Turning heatpump %s to FAN',
self.heater_entity_id)
self._heatpump_set_mode('FAN')
else:
too_cold = self._target_temp - self._cur_temp >= \
self._cold_tolerance
if too_cold:
_LOGGER.info('Turning heatpump %s to HEAT',
self.heater_entity_id)
self._heatpump_set_mode('HEAT')
async def _async_control_heating(self, time=None, force=False):
"""Check if we need to turn heating on or off."""
async with self._temp_lock:
if not self._active and None not in (self._cur_temp,
self._target_temp):
self._active = True
_LOGGER.info(
"Obtained current and target temperature. "
"Generic Dual-mode thermostat active. %s, %s",
self._cur_temp,
self._target_temp,
)
if not self._active or self._hvac_mode == HVAC_MODE_OFF:
return
if not force and time is None:
# If the `force` argument is True, we
# ignore `min_cycle_duration`.
# If the `time` argument is not none, we were invoked for
# keep-alive purposes, and `min_cycle_duration` is irrelevant.
if self.min_cycle_duration:
entity = (self.cooler_entity_id if self._hvac_mode
== HVAC_MODE_COOL else self.heater_entity_id)
if self._is_device_active:
current_state = STATE_ON
else:
current_state = HVAC_MODE_OFF
long_enough = condition.state(
self.hass,
entity,
current_state,
self.min_cycle_duration,
)
if not long_enough:
return
# self._hvac_mode can only be HVAC_MODE_HEAT or HVAC_MODE_COOL at this point
if self.sensor_mode == SENSOR_MODE_SMART:
if self._hvac_mode == HVAC_MODE_HEAT:
too_cold = (self._fs_heat_min_temp >=
self._cur_floor_temp + self._cold_tolerance or
(self._target_temp >=
self._cur_temp + self._cold_tolerance
and self._fs_heat_max_temp >=
self._cur_floor_temp + self._cold_tolerance))
too_hot = (self._cur_floor_temp >=
self._fs_heat_max_temp + self._hot_tolerance
or (self._cur_floor_temp >=
self._fs_heat_min_temp + self._hot_tolerance
and self._cur_temp >=
self._target_temp + self._hot_tolerance))
elif self._hvac_mode == HVAC_MODE_COOL:
too_cold = (self._cur_floor_temp + self._cold_tolerance <=
self._fs_cool_min_temp
or (self._fs_cool_max_temp >=
self._cur_floor_temp + self._cold_tolerance
and self._target_temp >=
self._cur_temp + self._cold_tolerance))
too_hot = (self._cur_floor_temp >=
self._fs_cool_max_temp + self._hot_tolerance or
(self._cur_temp >= self._target_temp +
self._hot_tolerance and self._cur_floor_temp >=
self._fs_cool_min_temp + self._hot_tolerance))
else:
too_cold = False
too_hot = False
_LOGGER.error("Smart mode, HVAC_MODE nor heat or cool")
elif self.sensor_mode == SENSOR_MODE_FLOOR:
if self._hvac_mode == HVAC_MODE_HEAT:
too_cold = (self._fs_heat_min_temp >=
self._cur_floor_temp + self._cold_tolerance or
(self._target_temp >=
self._cur_floor_temp + self._cold_tolerance
and self._fs_heat_max_temp >=
self._cur_floor_temp + self._cold_tolerance))
too_hot = (self._cur_floor_temp >=
self._fs_heat_max_temp + self._hot_tolerance
or (self._cur_floor_temp >=
self._fs_heat_min_temp + self._hot_tolerance
and self._cur_floor_temp >=
self._target_temp + self._hot_tolerance))
elif self._hvac_mode == HVAC_MODE_COOL:
too_cold = (self._fs_cool_min_temp >=
self._cur_floor_temp + self._cold_tolerance or
(self._fs_cool_max_temp >=
self._cur_floor_temp + self._cold_tolerance
and self._target_temp >=
self._cur_floor_temp + self._cold_tolerance))
too_hot = (self._cur_floor_temp >=
self._fs_cool_max_temp + self._hot_tolerance or
(self._cur_floor_temp >= self._target_temp +
self._hot_tolerance and self._target_temp >
self._fs_cool_min_temp + self._hot_tolerance))
else:
too_cold = False
too_hot = False
_LOGGER.error("Floor mode, HVAC_MODE nor heat or cool")
else: # self.sensor_mode == SENSOR_MODE_AMBIENT:
too_cold = self._target_temp >= self._cur_temp + self._cold_tolerance
too_hot = self._cur_temp >= self._target_temp + self._hot_tolerance
if self._is_device_active: # when to turn off
if too_cold and self._hvac_mode == HVAC_MODE_COOL:
_LOGGER.info("Turning off cooler %s",
self.cooler_entity_id)
await self._async_cooler_turn_off()
elif too_hot and self._hvac_mode == HVAC_MODE_HEAT:
_LOGGER.info("Turning off heater %s",
self.heater_entity_id)
await self._async_heater_turn_off()
elif time is not None:
# The time argument is passed only in keep-alive case
_LOGGER.info(
"Keep-alive - Turning on heater heater %s",
self.heater_entity_id if self._hvac_mode
== HVAC_MODE_HEAT else self.cooler_entity_id,
)
if self._hvac_mode == HVAC_MODE_COOL:
await self._async_cooler_turn_on()
elif self._hvac_mode == HVAC_MODE_HEAT:
await self._async_heater_turn_on()
else: # when to turn on
if too_hot and self._hvac_mode == HVAC_MODE_COOL:
_LOGGER.info("Turning on cooler %s", self.cooler_entity_id)
await self._async_cooler_turn_on()
elif too_cold and self._hvac_mode == HVAC_MODE_HEAT:
_LOGGER.info("Turning on heater %s", self.heater_entity_id)
await self._async_heater_turn_on()
elif time is not None:
# The time argument is passed only in keep-alive case
_LOGGER.info(
"Keep-alive - Turning off heater %s",
self.heater_entity_id if self._hvac_mode
== HVAC_MODE_HEAT else self.cooler_entity_id,
)
if self._hvac_mode == HVAC_MODE_COOL:
await self._async_cooler_turn_off()
elif self._hvac_mode == HVAC_MODE_HEAT:
await self._async_heater_turn_off()
async def _async_control_heating(self, time=None, force=False):
"""Check if we need to turn heating on or off."""
_LOGGER.debug("Check if we need to turn heating on or off")
async with self._temp_lock:
if not self._active and None not in (self._cur_temp,
self._target_temp):
self._active = True
_LOGGER.info("Obtained current and target temperature. "
"Generic thermostat active. %s, %s",
self._cur_temp, self._target_temp)
if not self._active or not self._enabled:
return
next_state = self._current_operation
is_heating = self._is_device_active
if is_heating:
too_hot = self._cur_temp - self._target_temp >= \
self._hot_tolerance
if too_hot:
next_state = STATE_STANDBY
else:
_LOGGER.debug("Evaluate regulation mode for heater %s",
self.heater_entity_id)
regulation_mode = self._cur_temp >= \
self._target_temp - self._regulation_delta
if regulation_mode:
next_state = STATE_REGULATION
else:
next_state = STATE_HEAT
else:
too_cold = self._target_temp - self._cur_temp >= \
self._cold_tolerance
if too_cold:
next_state = STATE_HEAT
else:
next_state = STATE_STANDBY
_LOGGER.debug("Next state for heater %s : %s", self.heater_entity_id, next_state)
if not force and time is None:
# If the `force` argument is True, we
# ignore `min_cycle_duration`.
# If the `time` argument is not none, we were invoked for
# keep-alive purposes, and `min_cycle_duration` is irrelevant.
if self.min_cycle_duration:
if self._is_device_active:
current_state = STATE_ON
else:
current_state = STATE_OFF
if next_state == STATE_STANDBY:
next_current_state = STATE_OFF
else:
next_current_state = STATE_ON
if current_state != next_current_state:
_LOGGER.debug("State : %s since %s", self.hass.states.get(self._heat_entity_id).state, self.hass.states.get(self._heat_entity_id).last_changed)
long_enough = condition.state(
self.hass, self._heat_entity_id, current_state,
self.min_cycle_duration)
if not long_enough:
_LOGGER.debug("Min cycle duration not reach for heater %s", self._heat_entity_id)
return
await self._async_set_heating_mode(next_state, time)
async def _async_operate(self, time=None, force=False):
"""Check if we need to turn humidifying on or off."""
async with self._humidity_lock:
if not self._active and None not in (
self._cur_humidity,
self._target_humidity,
):
self._active = True
force = True
_LOGGER.info(
"Obtained current and target humidity. "
"Generic hygrostat active. %s, %s",
self._cur_humidity,
self._target_humidity,
)
if not self._active or not self._state:
return
if not force and time is None:
# If the `force` argument is True, we
# ignore `min_cycle_duration`.
# If the `time` argument is not none, we were invoked for
# keep-alive purposes, and `min_cycle_duration` is irrelevant.
if self._min_cycle_duration:
if self._is_device_active:
current_state = STATE_ON
else:
current_state = STATE_OFF
long_enough = condition.state(
self.hass,
self._switch_entity_id,
current_state,
self._min_cycle_duration,
)
if not long_enough:
return
if force:
# Ignore the tolerance when switched on manually
dry_tolerance = 0
wet_tolerance = 0
else:
dry_tolerance = self._dry_tolerance
wet_tolerance = self._wet_tolerance
too_dry = self._target_humidity - self._cur_humidity >= dry_tolerance
too_wet = self._cur_humidity - self._target_humidity >= wet_tolerance
if self._is_device_active:
if (
self._device_class == HumidifierDeviceClass.HUMIDIFIER and too_wet
) or (
self._device_class == HumidifierDeviceClass.DEHUMIDIFIER and too_dry
):
_LOGGER.info("Turning off humidifier %s", self._switch_entity_id)
await self._async_device_turn_off()
elif time is not None:
# The time argument is passed only in keep-alive case
await self._async_device_turn_on()
else:
if (
self._device_class == HumidifierDeviceClass.HUMIDIFIER and too_dry
) or (
self._device_class == HumidifierDeviceClass.DEHUMIDIFIER and too_wet
):
_LOGGER.info("Turning on humidifier %s", self._switch_entity_id)
await self._async_device_turn_on()
elif time is not None:
# The time argument is passed only in keep-alive case
await self._async_device_turn_off()
async def _async_control_heating(self, time=None, force=False):
"""Check if we need to turn heating on or off."""
_LOGGER.debug("Check if we need to turn heating on or off")
async with self._temp_lock:
if not self._active and None not in (self._cur_temp,
self._target_temp):
self._active = True
_LOGGER.info(
"Obtained current and target temperature. "
"Generic thermostat active. %s, %s",
self._cur_temp,
self._target_temp,
)
if not self._active or self._hvac_mode == HVAC_MODE_OFF:
return
#CCL
next_state = self._hvac_mode
#End CCL
if not force and time is None:
# If the `force` argument is True, we
# ignore `min_cycle_duration`.
# If the `time` argument is not none, we were invoked for
# keep-alive purposes, and `min_cycle_duration` is irrelevant.
if self.min_cycle_duration:
if self._is_device_active:
current_state = STATE_ON
else:
current_state = HVAC_MODE_OFF
#CCL
if next_state == HVAC_MODE_IDLE:
next_current_state = HVAC_MODE_OFF
else:
next_current_state = STATE_ON
if current_state != next_current_state:
_LOGGER.debug(
"State : %s since %s",
self.hass.states.get(self._heat_entity_id).state,
self.hass.states.get(
self._heat_entity_id).last_changed)
#End CCL
long_enough = condition.state(
self.hass,
self.heater_entity_id,
current_state,
self.min_cycle_duration,
)
if not long_enough:
_LOGGER.debug(
"Min cycle duration not reach for heater %s",
self._heat_entity_id)
return
too_cold = self._target_temp - self._cur_temp >= self._cold_tolerance
too_hot = self._cur_temp - self._target_temp >= self._hot_tolerance
# CCL : Replace fallowing by ...
#if self._is_device_active:
# if (self.ac_mode and too_cold) or (not self.ac_mode and too_hot):
# _LOGGER.info("Turning off heater %s", self.heater_entity_id)
# await self._async_heater_turn_off()
# elif time is not None:
# # The time argument is passed only in keep-alive case
# await self._async_heater_turn_on()
#else:
# if (self.ac_mode and too_hot) or (not self.ac_mode and too_cold):
# _LOGGER.info("Turning on heater %s", self.heater_entity_id)
# await self._async_heater_turn_on()
# elif time is not None:
# # The time argument is passed only in keep-alive case
# await self._async_heater_turn_off()
if self._is_device_active:
if too_hot:
next_state = HVAC_MODE_IDLE
else:
_LOGGER.debug("Evaluate regulation mode for heater %s",
self.heater_entity_id)
regulation_mode = self._cur_temp >= \
self._target_temp - self._regulation_delta
if regulation_mode:
next_state = HVAC_MODE_REGULATION
else:
next_state = HVAC_MODE_COOL
else:
if too_cold:
next_state = HVAC_MODE_COOL
else:
next_state = HVAC_MODE_IDLE
_LOGGER.debug(
"Next state for heater %s : %s (force: %s, time: %s)",
self.heater_entity_id, next_state, force, time)
await self._async_set_heating_mode(next_state, time)
def test_is_state(hass: HomeAssistant,
variables: TemplateVarsType) -> bool:
"""Test if an entity is a certain state."""
return condition.state(hass, config[CONF_ENTITY_ID],
config[CONF_OPTION], config.get(CONF_FOR))
def test_is_on(hass: HomeAssistant, variables: TemplateVarsType) -> bool:
"""Test if an entity is on."""
return condition.state(hass, config[ATTR_ENTITY_ID], STATE_ON)
async def _async_control_heating(self, time=None, force=False):
"""Check if we need to turn heating on or off."""
async with self._temp_lock:
if not self._active and None not in (self._cur_temp, self._target_temp):
self._active = True
_LOGGER.info(
"Obtained current and target temperature. "
"Dual smart thermostat active. %s, %s",
self._cur_temp,
self._target_temp,
)
if not self._active or self._hvac_mode == HVAC_MODE_OFF:
return
if not force and time is None:
# If the `force` argument is True, we
# ignore `min_cycle_duration`.
# If the `time` argument is not none, we were invoked for
# keep-alive purposes, and `min_cycle_duration` is irrelevant.
if self.min_cycle_duration:
if self._is_device_active:
current_state = STATE_ON
else:
current_state = HVAC_MODE_OFF
long_enough = condition.state(
self.hass,
self.heater_entity_id,
current_state,
self.min_cycle_duration,
)
if not long_enough:
return
too_cold = self._target_temp >= self._cur_temp + self._cold_tolerance
too_hot = self._cur_temp >= self._target_temp + self._hot_tolerance
if self._is_device_active:
if (
(self.ac_mode and too_cold)
or (not self.ac_mode and too_hot)
or (not self.ac_mode and self._is_floor_hot)
or self._is_opening_open
):
_LOGGER.info("Turning off heater %s", self.heater_entity_id)
await self._async_heater_turn_off()
elif (
time is not None
and not self._is_opening_open
and not self._is_floor_hot
):
# The time argument is passed only in keep-alive case
_LOGGER.info(
"Keep-alive - Turning on heater (from active) %s",
self.heater_entity_id,
)
await self._async_heater_turn_on()
else:
if (self.ac_mode and too_hot and not self._is_opening_open) or (
not self.ac_mode
and too_cold
and not self._is_opening_open
and not self._is_floor_hot
):
_LOGGER.info(
"Turning on heater (from inactive) %s", self.heater_entity_id
)
await self._async_heater_turn_on()
elif time is not None or self._is_opening_open or self._is_floor_hot:
# The time argument is passed only in keep-alive case
_LOGGER.info(
"Keep-alive - Turning off heater %s", self.heater_entity_id
)
await self._async_heater_turn_off()
def test_is_state(hass: HomeAssistant,
variables: TemplateVarsType) -> bool:
"""Test if an entity is a certain state."""
return condition.state(hass, config[ATTR_ENTITY_ID], state)
async def _async_control_heating(self, force=False):
_LOGGER.debug("running _async_control_heating")
"""Check if we need to turn heating on or off."""
async with self._temp_lock:
if not self._active and None not in (self._cur_temp,
self._target_temp_high,
self._target_temp_low):
self._active = True
_LOGGER.info(
"Obtained current and target temperature. "
"Generic thermostat active. %s, %s, %s", self._cur_temp,
self._target_temp_low, self._target_temp_high)
if not self._active:
_LOGGER.debug("not active")
return
if self._hvac_mode == HVAC_MODE_OFF:
_LOGGER.debug("Mode is off")
return
if not force:
_LOGGER.debug("force = false")
# If the `force` argument is True, we
# ignore `min_cycle_duration`.
if self.min_cycle_duration:
_LOGGER.debug("min_cycle_duration = false")
entity = self.cooler_entity_id if self._hvac_mode == HVAC_MODE_COOL else self.heater_entity_id
if self._is_device_active:
current_state = STATE_ON
else:
current_state = HVAC_MODE_OFF
long_enough = condition.state(
self.hass,
entity,
current_state,
self.min_cycle_duration,
)
if not long_enough:
_LOGGER.debug("not long enough")
return
too_cold = self._target_temp_low - self._cur_temp >= self._cold_tolerance
too_hot = self._cur_temp - self._target_temp_high >= self._hot_tolerance
cool_enough = self._target_temp_high - self._cur_temp >= self._hot_tolerance
warm_enough = self._cur_temp - self._target_temp_low >= self._cold_tolerance
_LOGGER.debug(
"States: too_cold=%s too_hot=%s cool_enough=%s warm_enough=%s",
too_cold, too_hot, cool_enough, warm_enough)
_LOGGER.debug("Mode: %s, %s", self._hvac_mode,
self._is_device_active)
if self._is_device_active: # when to turn off
if cool_enough and (self._hvac_mode == HVAC_MODE_COOL
or self._hvac_mode == HVAC_MODE_HEAT_COOL):
_LOGGER.info("Turning off cooler %s",
self.cooler_entity_id)
await self._async_cooler_turn_off()
elif warm_enough and (self._hvac_mode == HVAC_MODE_HEAT or
self._hvac_mode == HVAC_MODE_HEAT_COOL):
_LOGGER.info("Turning off heater %s",
self.heater_entity_id)
await self._async_heater_turn_off()
else: # when to turn on
if too_hot and (self._hvac_mode == HVAC_MODE_COOL
or self._hvac_mode == HVAC_MODE_HEAT_COOL):
_LOGGER.info("Turning on cooler %s", self.cooler_entity_id)
await self._async_cooler_turn_on()
elif too_cold and (self._hvac_mode == HVAC_MODE_HEAT
or self._hvac_mode == HVAC_MODE_HEAT_COOL):
_LOGGER.info("Turning on heater %s", self.heater_entity_id)
await self._async_heater_turn_on()
