def test_engine_folder_cleanup(tmpdir):
from homely._engine2 import Engine
from homely.files import MakeDir
# first thing ... test mkdir cleanup
# a temporary file where the engine can store its config
cfgpath = gettmpfilepath(tmpdir, '.json')
d1 = os.path.join(tmpdir, 'dir1')
d2 = os.path.join(tmpdir, 'dir2')
d2a = os.path.join(d2, 'sub-a')
d2a1 = os.path.join(d2a, 'supersub-1')
d2a2 = os.path.join(d2a, 'supersub-2')
# create the first directory
e = Engine(cfgpath)
e.run(MakeDir(d1))
e.cleanup(e.RAISE)
del e
e = Engine(cfgpath)
e.run(MakeDir(d1))
e.run(MakeDir(d2))
e.run(MakeDir(d2a))
e.run(MakeDir(d2a1))
e.run(MakeDir(d2a2))
e.cleanup(e.RAISE)
del e
# all dirs should exist now
check = [d1, d2, d2a, d2a1, d2a2]
for d in check:
assert os.path.exists(d)
assert all(map(os.path.exists, check))
# make a new engine and make ONLY d2a1 ... this should
# be enough to keep everything but d1 and d2a2 alive
e = Engine(cfgpath)
e.run(MakeDir(d2a2))
e.cleanup(e.POSTPONE)
del e
# all dirs should exist except for d1 and d2a1
assert all(map(os.path.exists, [d2, d2a, d2a2]))
assert not any(map(os.path.exists, [d1, d2a1]))
# make a new engine, add nothing to it, this should be enough to blast away
# all directories
e = Engine(cfgpath)
e.cleanup(e.RAISE)
del e
# all dirs are gone, EXCEPT FOR our original tmpdir, which our cleaners
# were smart enough to leave behind
assert not any(map(os.path.exists, [d1, d2, d2a, d2a1, d2a2]))
assert os.path.exists(tmpdir)
def test_writefile_usage(tmpdir):
from homely._engine2 import Engine
from homely.files import LineInFile
from homely.general import WriteFile, writefile
cfgpath = gettmpfilepath(tmpdir, '.json')
# the file we'll be playing with
f1 = os.path.join(tmpdir, 'f1.txt')
f2 = os.path.join(tmpdir, 'f2.txt')
f3 = os.path.join(tmpdir, 'f3.json')
# use LineInFile to put stuff in the file
e = Engine(cfgpath)
e.run(LineInFile(f1, 'AAA'))
e.run(LineInFile(f1, 'BBB'))
del e
assert contents(f1) == "AAA\nBBB\n"
# now use WriteFile() to give it new contents
e = Engine(cfgpath)
e.run(WriteFile(f1, "BBB\nCCC\n"))
assert contents(f1) == "BBB\nCCC\n"
e.cleanup(e.RAISE)
del e
# make sure the cleanup didn't blow anything away
assert contents(f1) == "BBB\nCCC\n"
# make sure the file is removed on cleanup
e = Engine(cfgpath)
e.cleanup(e.RAISE)
del e
assert not os.path.exists(f1)
contents(f2, "Already here!\n")
assert os.path.exists(f2)
e = Engine(cfgpath)
e.run(WriteFile(f2, "AAA\nBBB\n", canoverwrite=True))
e.cleanup(e.RAISE)
del e
assert contents(f2) == "AAA\nBBB\n"
# running a LineInFile() won't clean up what's already there
e = Engine(cfgpath)
e.run(LineInFile(f2, "CCC"))
e.cleanup(e.RAISE)
del e
assert contents(f2) == "AAA\nBBB\nCCC\n"
# note that removing the LineInFile() doesn't clean up the file because we
# no longer know whether the user put their config in there
e = Engine(cfgpath)
e.cleanup(e.RAISE)
del e
assert not os.path.exists(f1)
assert os.path.exists(f2)
# now test the context manager
import homely._engine2
e = Engine(cfgpath)
homely._engine2._ENGINE = e
data = {"z": [3, 4, 5, True], "y": "Hello world", "x": None}
with writefile(f3) as f:
if sys.version_info[0] < 3:
f.write(simplejson.dumps(data, ensure_ascii=False))
else:
f.write(simplejson.dumps(data))
e.cleanup(e.RAISE)
del e
assert os.path.exists(f3)
with open(f3, 'r') as f:
assert simplejson.loads(f.read()) == data
# prove that the WriteFile() disappearing results in the file being removed
e = Engine(cfgpath)
e.cleanup(e.RAISE)
del e
assert not os.path.exists(f3)
def test_symlink_cleanup_interaction(tmpdir):
from homely._engine2 import Engine
from homely._errors import CleanupConflict
from homely.files import MakeDir, MakeSymlink
cfgpath = gettmpfilepath(tmpdir)
d1 = os.path.join(tmpdir, 'dir1')
l1 = os.path.join(tmpdir, 'link1')
d1da = os.path.join(d1, 'dir-a')
l1da = os.path.join(l1, 'dir-a')
# basic symlink
e = Engine(cfgpath)
e.run(MakeDir(d1))
e.run(MakeSymlink(d1, l1))
e.cleanup(e.RAISE)
del e
# make sure they both exist, and the symlink has the correct target
assert os.path.isdir(d1)
assert os.path.islink(l1) and os.readlink(l1) == d1
# mkdir() inside a symlink's target
e = Engine(cfgpath)
e.run(MakeDir(d1))
e.run(MakeSymlink(d1, l1))
e.run(MakeDir(l1da))
e.cleanup(e.POSTPONE)
del e
# everything should exist, the symlink should have the correct target
assert os.path.isdir(d1)
assert os.path.islink(l1) and os.readlink(l1) == d1
assert os.path.isdir(d1da) and os.path.isdir(l1da)
# if we try and get rid of the symlink now, the cleaner will hang around
# because it can't garbage collect the thing right now
e = Engine(cfgpath)
e.run(MakeDir(d1))
e.run(MakeDir(l1da))
try:
e.cleanup(e.RAISE)
except CleanupConflict as err:
# conflict should be over the symlink's path
assert err.conflictpath == l1
# the path should still be needed by `l1da`
assert err.pathwanter == l1da
else:
raise Exception("Expected a cleanup error!") # noqa
del e
# clean everything up now
e = Engine(cfgpath)
e.cleanup(e.RAISE)
del e
assert not any(map(os.path.exists, [d1, d1da, l1]))
os.unlink(cfgpath)
# now we try the opposite - symlink to a directory and try to clean up the
# directory
e = Engine(cfgpath)
e.run(MakeDir(d1))
e.run(MakeSymlink(d1, l1))
e.cleanup(e.RAISE)
del e
assert os.path.isdir(d1)
assert os.path.islink(l1) and os.readlink(l1) == d1
# the engine will happily clean up the directory, even though there is a
# symlink pointing to it ... symlinks don't care whether the target exists
# or not
e = Engine(cfgpath)
e.run(MakeSymlink(d1, l1))
e.cleanup(e.RAISE)
del e
# clean up everything now
e = Engine(cfgpath)
e.cleanup(e.RAISE)
assert not any(map(os.path.exists, [d1, d1da, l1]))
os.unlink(cfgpath)
def test_cleanup_everything(tmpdir):
'''
test that recreating the engine, running nothing on it, then calling
cleanup() will remove all of things that might be lying around
'''
from homely._engine2 import Engine
from homely.files import MakeDir, MakeSymlink, LineInFile
cfgpath = gettmpfilepath(tmpdir, '.json')
d1 = gettmpfilepath(tmpdir, '.d')
d1f1 = os.path.join(d1, 'sub-file.txt')
l1 = gettmpfilepath(tmpdir, '.lnk')
e = Engine(cfgpath)
e.run(MakeDir(d1))
e.run(MakeSymlink(d1, l1))
e.run(LineInFile(d1f1, "AAA"))
e.cleanup(e.RAISE)
del e
assert os.path.isdir(d1)
assert contents(d1f1, "AAA\n")
assert os.path.islink(l1) and os.readlink(l1) == d1
# if we recreate the engine with nothing on it, it should clean everything
# up
e = Engine(cfgpath)
e.cleanup(e.RAISE)
assert not os.path.exists(d1)
assert not os.path.islink(l1)
def test_partial_run_cleanup(tmpdir):
from homely._engine2 import Engine
from homely.files import MakeDir
cfgpath = gettmpfilepath(tmpdir, '.json')
d1 = os.path.join(tmpdir, 'dir1')
d2 = os.path.join(tmpdir, 'dir2')
# simulate adding our first repo which just creates d1
e = Engine(cfgpath)
e.run(MakeDir(d1))
e.cleanup(e.RAISE)
del e
assert os.path.isdir(d1) and not os.path.isdir(d2)
# simulate adding a 2nd repo that would just created 2 ... this shouldn't
# trigger a cleanup though
e = Engine(cfgpath)
e.run(MakeDir(d2))
del e
assert os.path.isdir(d1) and os.path.isdir(d2)
# pretend that the first repo is removed, and do a full update
e = Engine(cfgpath)
e.run(MakeDir(d2))
e.cleanup(e.RAISE)
assert not os.path.isdir(d1) and os.path.isdir(d2)
def test_lineinfile_cleanup_interaction(tmpdir):
from homely._engine2 import Engine
from homely.files import MakeDir, LineInFile
# a temporary file where the engine can store its config
cfgpath = gettmpfilepath(tmpdir, '.json')
f1 = os.path.join(tmpdir, 'f1.txt')
d1 = os.path.join(tmpdir, 'f1.txt.dir')
d1f1 = os.path.join(d1, 'f-1.txt')
d2 = os.path.join(tmpdir, 'dir2')
d2f1 = os.path.join(d2, 'f-1.txt')
d3 = os.path.join(tmpdir, 'dir3')
d3d1 = os.path.join(d3, 'sub-1')
d3d2 = os.path.join(d3, 'sub-2')
d3d1f1 = os.path.join(d3d1, 'somefile.txt')
d3d2f1 = os.path.join(d3d2, 'somefile.txt')
# make the dir and the file, make sure they both exist
e = Engine(cfgpath)
e.run(LineInFile(f1, "AAA"))
e.run(MakeDir(d1))
e.cleanup(e.RAISE)
del e
assert os.path.isdir(d1)
assert contents(f1) == "AAA\n"
# remake the engine without the dir, make sure the dir isn't kept around by
# the file
e = Engine(cfgpath)
e.run(LineInFile(f1, "AAA"))
e.cleanup(e.POSTPONE)
del e
assert not os.path.exists(d1)
assert contents(f1) == "AAA\n"
# make a new file in the directory, make sure they take ownership of the
# directory
e = Engine(cfgpath)
e.run(MakeDir(d1))
e.run(LineInFile(d1f1, "AAA"))
e.run(LineInFile(d1f1, "BBB"))
e.cleanup(e.POSTPONE)
del e
# the directory should still exist, the old file should not, and the new
# file should contain both lines
assert os.path.isdir(d1)
assert not os.path.exists(f1)
assert contents(d1f1) == "AAA\nBBB\n"
# if we do the same thing again but without the MakeDir, we should get
# exactly the same result
e = Engine(cfgpath)
e.run(LineInFile(d1f1, "AAA"))
e.run(LineInFile(d1f1, "BBB"))
e.cleanup(e.POSTPONE)
del e
# the directory should still exist, the old file should not, and the new
# file should contain both lines
assert os.path.isdir(d1)
assert not os.path.exists(f1)
assert contents(d1f1) == "AAA\nBBB\n"
# the important thing to note is that the engine still knows that it needs
# to clean up the directory later
e = Engine(cfgpath)
assert e.pathstoclean()[d1] == e.TYPE_FOLDER_ONLY
del e
# if we get rid of one of the LineInFile() items, the file and dir still
# hang around
e = Engine(cfgpath)
e.run(LineInFile(d1f1, "AAA"))
e.cleanup(e.POSTPONE)
del e
assert contents(d1f1) == "AAA\n"
# now, when we get rid of the last LineInFile() items, everything will be
# cleaned up
e = Engine(cfgpath)
e.cleanup(e.RAISE)
del e
assert not os.path.exists(d1)
os.unlink(cfgpath)
# if we make a dir ourselves, a LineInFile() will not clean it up
assert not os.path.exists(d2)
os.mkdir(d2)
e = Engine(cfgpath)
e.run(LineInFile(d2f1, "AAA"))
del e
assert contents(d2f1) == "AAA\n"
e = Engine(cfgpath)
e.cleanup(e.RAISE)
del e
assert os.path.isdir(d2) and not os.path.exists(d2f1)
os.rmdir(d2)
# if we make a file ourselves, LineInFile() will not try to clean it up
assert not os.path.exists(f1)
contents(f1, "")
e = Engine(cfgpath)
e.run(LineInFile(f1, "AAA"))
del e
assert contents(f1) == "AAA\n"
e = Engine(cfgpath)
e.cleanup(e.RAISE)
del e
assert contents(f1) == ""
# if two LineInFile() items share a parent dir (even the parent dir's
# parent, and so on), and that parent dir was made by a MakeDir(), then it
# gets cleaned up eventually when both of the LineInFile() items go away
# - create the folder structure
assert not os.path.exists(d3)
os.unlink(cfgpath)
e = Engine(cfgpath)
e.run(MakeDir(d3))
e.run(MakeDir(d3d1))
e.run(MakeDir(d3d2))
e.cleanup(e.RAISE)
del e
assert all(map(os.path.isdir, [d3, d3d1, d3d2]))
assert not any(map(os.path.exists, [d3d1f1, d3d2f1]))
# - scrap the folder structure, but make files that depend on those folders
e = Engine(cfgpath)
e.run(LineInFile(d3d1f1, "AAA"))
e.run(LineInFile(d3d2f1, "BBB"))
e.cleanup(e.POSTPONE)
del e
assert contents(d3d1f1) == "AAA\n" and contents(d3d2f1) == "BBB\n"
# - scrap the first file, and check that only things needed for the 2nd
# file remain
e = Engine(cfgpath)
e.run(LineInFile(d3d2f1, "BBB"))
e.cleanup(e.POSTPONE)
del e
assert not os.path.exists(d3d1)
assert contents(d3d2f1) == "BBB\n"
# - scrap the 2nd file and make sure everything else disappears
e = Engine(cfgpath)
e.cleanup(e.RAISE)
del e
assert not os.path.exists(d3)
def test_blockinfile_lineinfile_cleanup_interaction(tmpdir):
'''
Test that when a LineInFile is cleaned up, any other LineInFile() or
BlockInFile() that affected the same file, needs a chance to re-check
whether it is still valid. If *any* of the remaining Helpers needs to be
reapplied, then they *all* need to be reapplied.
'''
from homely._engine2 import Engine
from homely.files import LineInFile, BlockInFile
cfgpath = gettmpfilepath(tmpdir, '.json')
f1 = gettmpfilepath(tmpdir, '.txt')
def bif(filename, lines):
# shorthand constructor for BlockInFile()
return BlockInFile(filename, lines, None, "PRE", "POST")
# check that a LineInFile followed by a BlockInFile that both try to add
# the same line will result in the file containing both things, even if
# you rerun it many times
for i in range(3):
e = Engine(cfgpath)
e.run(LineInFile(f1, "AAA"))
e.run(bif(f1, ["AAA"]))
e.cleanup(e.RAISE)
del e
assert contents(f1) == "AAA\nPRE\nAAA\nPOST\n"
# check that a BlockInFile followed by a LineInFile that adds the same line
# will result in the LineInFile not having any effect, even if you rerun it
# many times
os.unlink(f1)
for i in range(3):
e = Engine(cfgpath)
e.run(bif(f1, ["AAA"]))
e.run(LineInFile(f1, "AAA"))
e.cleanup(e.RAISE)
del e
assert contents(f1) == "PRE\nAAA\nPOST\n"
# check that removing the LineInFile doesn't destroy the contents added by
# BlockInFile
e = Engine(cfgpath)
e.run(bif(f1, ["AAA"]))
e.cleanup(e.RAISE)
del e
assert contents(f1) == "PRE\nAAA\nPOST\n"
# put both things back in ...
e = Engine(cfgpath)
e.run(bif(f1, ["AAA"]))
e.run(LineInFile(f1, "AAA"))
e.cleanup(e.RAISE)
del e
assert contents(f1) == "PRE\nAAA\nPOST\n"
# test that the LineInFile keeps itself there after removing the
# BlockInFile
e = Engine(cfgpath)
e.run(LineInFile(f1, "AAA"))
e.cleanup(e.RAISE)
del e
assert contents(f1) == "AAA\n"
def test_engine_folder_cleanup(tmpdir):
from homely._engine2 import Engine
from homely.files import MakeDir
# first thing ... test mkdir cleanup
# a temporary file where the engine can store its config
cfgpath = gettmpfilepath(tmpdir, '.json')
d1 = os.path.join(tmpdir, 'dir1')
d2 = os.path.join(tmpdir, 'dir2')
d2a = os.path.join(d2, 'sub-a')
d2a1 = os.path.join(d2a, 'supersub-1')
d2a2 = os.path.join(d2a, 'supersub-2')
# create the first directory
e = Engine(cfgpath)
e.run(MakeDir(d1))
e.cleanup(e.RAISE)
del e
e = Engine(cfgpath)
e.run(MakeDir(d1))
e.run(MakeDir(d2))
e.run(MakeDir(d2a))
e.run(MakeDir(d2a1))
e.run(MakeDir(d2a2))
e.cleanup(e.RAISE)
del e
# all dirs should exist now
check = [d1, d2, d2a, d2a1, d2a2]
for d in check:
assert os.path.exists(d)
assert all(map(os.path.exists, check))
# make a new engine and make ONLY d2a1 ... this should
# be enough to keep everything but d1 and d2a2 alive
e = Engine(cfgpath)
e.run(MakeDir(d2a2))
e.cleanup(e.POSTPONE)
del e
# all dirs should exist except for d1 and d2a1
assert all(map(os.path.exists, [d2, d2a, d2a2]))
assert not any(map(os.path.exists, [d1, d2a1]))
# make a new engine, add nothing to it, this should be enough to blast away
# all directories
e = Engine(cfgpath)
e.cleanup(e.RAISE)
del e
# all dirs are gone, EXCEPT FOR our original tmpdir, which our cleaners
# were smart enough to leave behind
assert not any(map(os.path.exists, [d1, d2, d2a, d2a1, d2a2]))
assert os.path.exists(tmpdir)
def test_lineinfile_usage(tmpdir):
from homely._engine2 import Engine
from homely.files import WHERE_END, WHERE_TOP, LineInFile
cfgpath = gettmpfilepath(tmpdir, '.json')
f1 = gettmpfilepath(tmpdir)
# make sure the following types of input raise exceptions
bad = [
"", # empty line
"something\n", # a string containing a newline
" \t", # a line containing nothing but whitespace
]
for b in bad:
try:
LineInFile(f1, b)
except Exception:
# we got an exception
pass
else:
raise Exception("LineInFile should not accept input %s" % repr(b))
# make sure LineInFile() doesn't override an existing line
contents(f1, "AAA\nBBB\n")
e = Engine(cfgpath)
e.run(LineInFile(f1, "BBB"))
assert contents(f1) == "AAA\nBBB\n"
# make sure LineInFile() puts a new line at the end of the file by default
e = Engine(cfgpath)
e.run(LineInFile(f1, "CCC"))
assert contents(f1) == "AAA\nBBB\nCCC\n"
# make sure LineInFile() doesn't move a line unnecessarily
e = Engine(cfgpath)
e.run(LineInFile(f1, "BBB"))
assert contents(f1) == "AAA\nBBB\nCCC\n"
# make sure LineInFile() can move a line to the TOP of the file
e = Engine(cfgpath)
e.run(LineInFile(f1, "BBB", WHERE_TOP))
assert contents(f1) == "BBB\nAAA\nCCC\n"
# make sure LineInFile() can move a line to the END of the file
e = Engine(cfgpath)
e.run(LineInFile(f1, "BBB", WHERE_END))
assert contents(f1) == "AAA\nCCC\nBBB\n"
# make sure LineInFile() doesn't blow away empty lines
# - adding to end of file
contents(f1, "\n\n", strip=False)
e = Engine(cfgpath)
e.run(LineInFile(f1, "AAA"))
assert contents(f1) == "\n\nAAA\n"
# - adding to start of file
contents(f1, "\n\n", strip=False)
e = Engine(cfgpath)
e.run(LineInFile(f1, "AAA", WHERE_TOP))
assert contents(f1) == "AAA\n\n\n"
# - when restoring the file
e = Engine(cfgpath)
e.cleanup(e.RAISE)
del e
assert contents(f1) == "\n\n"
# - replacing something in the middle
contents(f1, "\n\nAAA\n\n\n", strip=False)
e = Engine(cfgpath)
e.run(LineInFile(f1, "AAA"))
assert contents(f1) == "\n\nAAA\n\n\n"
# make sure LineInFile() respects existing line endings
# NOTE: in python2 we always use Universal Newlines when reading the file,
# which tricks us into using "\n" when writing the file
if sys.version_info[0] > 2:
# - windows
contents(f1, "AAA\r\nBBB\r\n")
e = Engine(cfgpath)
e.run(LineInFile(f1, "CCC"))
assert contents(f1) == "AAA\r\nBBB\r\nCCC\r\n"
# - mac
contents(f1, "AAA\rBBB\r")
e = Engine(cfgpath)
e.run(LineInFile(f1, "BBB", WHERE_TOP))
assert contents(f1) == "BBB\rAAA\r"
# make sure a file that starts empty is left empty after cleanup
contents(f1, "")
e = Engine(cfgpath)
e.run(LineInFile(f1, "AAA"))
assert contents(f1) == "AAA\n"
e = Engine(cfgpath)
e.cleanup(e.RAISE)
assert contents(f1) == ""
def test_writefile_usage(tmpdir):
from homely._engine2 import Engine
from homely.files import LineInFile
from homely.general import WriteFile, writefile
cfgpath = gettmpfilepath(tmpdir, '.json')
# the file we'll be playing with
f1 = os.path.join(tmpdir, 'f1.txt')
f2 = os.path.join(tmpdir, 'f2.txt')
f3 = os.path.join(tmpdir, 'f3.json')
# use LineInFile to put stuff in the file
e = Engine(cfgpath)
e.run(LineInFile(f1, 'AAA'))
e.run(LineInFile(f1, 'BBB'))
del e
assert contents(f1) == "AAA\nBBB\n"
# now use WriteFile() to give it new contents
e = Engine(cfgpath)
e.run(WriteFile(f1, "BBB\nCCC\n"))
assert contents(f1) == "BBB\nCCC\n"
e.cleanup(e.RAISE)
del e
# make sure the cleanup didn't blow anything away
assert contents(f1) == "BBB\nCCC\n"
# make sure the file is removed on cleanup
e = Engine(cfgpath)
e.cleanup(e.RAISE)
del e
assert not os.path.exists(f1)
contents(f2, "Already here!\n")
assert os.path.exists(f2)
e = Engine(cfgpath)
e.run(WriteFile(f2, "AAA\nBBB\n", canoverwrite=True))
e.cleanup(e.RAISE)
del e
assert contents(f2) == "AAA\nBBB\n"
# running a LineInFile() won't clean up what's already there
e = Engine(cfgpath)
e.run(LineInFile(f2, "CCC"))
e.cleanup(e.RAISE)
del e
assert contents(f2) == "AAA\nBBB\nCCC\n"
# note that removing the LineInFile() doesn't clean up the file because we
# no longer know whether the user put their config in there
e = Engine(cfgpath)
e.cleanup(e.RAISE)
del e
assert not os.path.exists(f1)
assert os.path.exists(f2)
# now test the context manager
import homely._engine2
e = Engine(cfgpath)
homely._engine2._ENGINE = e
data = {"z": [3, 4, 5, True], "y": "Hello world", "x": None}
with writefile(f3) as f:
if sys.version_info[0] < 3:
f.write(simplejson.dumps(data, ensure_ascii=False))
else:
f.write(simplejson.dumps(data))
e.cleanup(e.RAISE)
del e
assert os.path.exists(f3)
with open(f3, 'r') as f:
assert simplejson.loads(f.read()) == data
# prove that the WriteFile() disappearing results in the file being removed
e = Engine(cfgpath)
e.cleanup(e.RAISE)
del e
assert not os.path.exists(f3)
def test_symlink_cleanup_interaction(tmpdir):
from homely._engine2 import Engine
from homely._errors import CleanupConflict
from homely.files import MakeDir, MakeSymlink
cfgpath = gettmpfilepath(tmpdir)
d1 = os.path.join(tmpdir, 'dir1')
l1 = os.path.join(tmpdir, 'link1')
d1da = os.path.join(d1, 'dir-a')
l1da = os.path.join(l1, 'dir-a')
# basic symlink
e = Engine(cfgpath)
e.run(MakeDir(d1))
e.run(MakeSymlink(d1, l1))
e.cleanup(e.RAISE)
del e
# make sure they both exist, and the symlink has the correct target
assert os.path.isdir(d1)
assert os.path.islink(l1) and os.readlink(l1) == d1
# mkdir() inside a symlink's target
e = Engine(cfgpath)
e.run(MakeDir(d1))
e.run(MakeSymlink(d1, l1))
e.run(MakeDir(l1da))
e.cleanup(e.POSTPONE)
del e
# everything should exist, the symlink should have the correct target
assert os.path.isdir(d1)
assert os.path.islink(l1) and os.readlink(l1) == d1
assert os.path.isdir(d1da) and os.path.isdir(l1da)
# if we try and get rid of the symlink now, the cleaner will hang around
# because it can't garbage collect the thing right now
e = Engine(cfgpath)
e.run(MakeDir(d1))
e.run(MakeDir(l1da))
try:
e.cleanup(e.RAISE)
except CleanupConflict as err:
# conflict should be over the symlink's path
assert err.conflictpath == l1
# the path should still be needed by `l1da`
assert err.pathwanter == l1da
else:
raise Exception("Expected a cleanup error!") # noqa
del e
# clean everything up now
e = Engine(cfgpath)
e.cleanup(e.RAISE)
del e
assert not any(map(os.path.exists, [d1, d1da, l1]))
os.unlink(cfgpath)
# now we try the opposite - symlink to a directory and try to clean up the
# directory
e = Engine(cfgpath)
e.run(MakeDir(d1))
e.run(MakeSymlink(d1, l1))
e.cleanup(e.RAISE)
del e
assert os.path.isdir(d1)
assert os.path.islink(l1) and os.readlink(l1) == d1
# the engine will happily clean up the directory, even though there is a
# symlink pointing to it ... symlinks don't care whether the target exists
# or not
e = Engine(cfgpath)
e.run(MakeSymlink(d1, l1))
e.cleanup(e.RAISE)
del e
# clean up everything now
e = Engine(cfgpath)
e.cleanup(e.RAISE)
assert not any(map(os.path.exists, [d1, d1da, l1]))
os.unlink(cfgpath)
def test_partial_run_cleanup(tmpdir):
from homely._engine2 import Engine
from homely.files import MakeDir
cfgpath = gettmpfilepath(tmpdir, '.json')
d1 = os.path.join(tmpdir, 'dir1')
d2 = os.path.join(tmpdir, 'dir2')
# simulate adding our first repo which just creates d1
e = Engine(cfgpath)
e.run(MakeDir(d1))
e.cleanup(e.RAISE)
del e
assert os.path.isdir(d1) and not os.path.isdir(d2)
# simulate adding a 2nd repo that would just created 2 ... this shouldn't
# trigger a cleanup though
e = Engine(cfgpath)
e.run(MakeDir(d2))
del e
assert os.path.isdir(d1) and os.path.isdir(d2)
# pretend that the first repo is removed, and do a full update
e = Engine(cfgpath)
e.run(MakeDir(d2))
e.cleanup(e.RAISE)
assert not os.path.isdir(d1) and os.path.isdir(d2)
def test_cleanup_everything(tmpdir):
'''
test that recreating the engine, running nothing on it, then calling
cleanup() will remove all of things that might be lying around
'''
from homely._engine2 import Engine
from homely.files import MakeDir, MakeSymlink, LineInFile
cfgpath = gettmpfilepath(tmpdir, '.json')
d1 = gettmpfilepath(tmpdir, '.d')
d1f1 = os.path.join(d1, 'sub-file.txt')
l1 = gettmpfilepath(tmpdir, '.lnk')
e = Engine(cfgpath)
e.run(MakeDir(d1))
e.run(MakeSymlink(d1, l1))
e.run(LineInFile(d1f1, "AAA"))
e.cleanup(e.RAISE)
del e
assert os.path.isdir(d1)
assert contents(d1f1, "AAA\n")
assert os.path.islink(l1) and os.readlink(l1) == d1
# if we recreate the engine with nothing on it, it should clean everything
# up
e = Engine(cfgpath)
e.cleanup(e.RAISE)
assert not os.path.exists(d1)
assert not os.path.islink(l1)
def test_blockinfile_lineinfile_cleanup_interaction(tmpdir):
'''
Test that when a LineInFile is cleaned up, any other LineInFile() or
BlockInFile() that affected the same file, needs a chance to re-check
whether it is still valid. If *any* of the remaining Helpers needs to be
reapplied, then they *all* need to be reapplied.
'''
from homely._engine2 import Engine
from homely.files import LineInFile, BlockInFile
cfgpath = gettmpfilepath(tmpdir, '.json')
f1 = gettmpfilepath(tmpdir, '.txt')
def bif(filename, lines):
# shorthand constructor for BlockInFile()
return BlockInFile(filename, lines, None, "PRE", "POST")
# check that a LineInFile followed by a BlockInFile that both try to add
# the same line will result in the file containing both things, even if
# you rerun it many times
for i in range(3):
e = Engine(cfgpath)
e.run(LineInFile(f1, "AAA"))
e.run(bif(f1, ["AAA"]))
e.cleanup(e.RAISE)
del e
assert contents(f1) == "AAA\nPRE\nAAA\nPOST\n"
# check that a BlockInFile followed by a LineInFile that adds the same line
# will result in the LineInFile not having any effect, even if you rerun it
# many times
os.unlink(f1)
for i in range(3):
e = Engine(cfgpath)
e.run(bif(f1, ["AAA"]))
e.run(LineInFile(f1, "AAA"))
e.cleanup(e.RAISE)
del e
assert contents(f1) == "PRE\nAAA\nPOST\n"
# check that removing the LineInFile doesn't destroy the contents added by
# BlockInFile
e = Engine(cfgpath)
e.run(bif(f1, ["AAA"]))
e.cleanup(e.RAISE)
del e
assert contents(f1) == "PRE\nAAA\nPOST\n"
# put both things back in ...
e = Engine(cfgpath)
e.run(bif(f1, ["AAA"]))
e.run(LineInFile(f1, "AAA"))
e.cleanup(e.RAISE)
del e
assert contents(f1) == "PRE\nAAA\nPOST\n"
# test that the LineInFile keeps itself there after removing the
# BlockInFile
e = Engine(cfgpath)
e.run(LineInFile(f1, "AAA"))
e.cleanup(e.RAISE)
del e
assert contents(f1) == "AAA\n"
def test_lineinfile_cleanup_interaction(tmpdir):
from homely._engine2 import Engine
from homely.files import MakeDir, LineInFile
# a temporary file where the engine can store its config
cfgpath = gettmpfilepath(tmpdir, '.json')
f1 = os.path.join(tmpdir, 'f1.txt')
d1 = os.path.join(tmpdir, 'f1.txt.dir')
d1f1 = os.path.join(d1, 'f-1.txt')
d2 = os.path.join(tmpdir, 'dir2')
d2f1 = os.path.join(d2, 'f-1.txt')
d3 = os.path.join(tmpdir, 'dir3')
d3d1 = os.path.join(d3, 'sub-1')
d3d2 = os.path.join(d3, 'sub-2')
d3d1f1 = os.path.join(d3d1, 'somefile.txt')
d3d2f1 = os.path.join(d3d2, 'somefile.txt')
# make the dir and the file, make sure they both exist
e = Engine(cfgpath)
e.run(LineInFile(f1, "AAA"))
e.run(MakeDir(d1))
e.cleanup(e.RAISE)
del e
assert os.path.isdir(d1)
assert contents(f1) == "AAA\n"
# remake the engine without the dir, make sure the dir isn't kept around by
# the file
e = Engine(cfgpath)
e.run(LineInFile(f1, "AAA"))
e.cleanup(e.POSTPONE)
del e
assert not os.path.exists(d1)
assert contents(f1) == "AAA\n"
# make a new file in the directory, make sure they take ownership of the
# directory
e = Engine(cfgpath)
e.run(MakeDir(d1))
e.run(LineInFile(d1f1, "AAA"))
e.run(LineInFile(d1f1, "BBB"))
e.cleanup(e.POSTPONE)
del e
# the directory should still exist, the old file should not, and the new
# file should contain both lines
assert os.path.isdir(d1)
assert not os.path.exists(f1)
assert contents(d1f1) == "AAA\nBBB\n"
# if we do the same thing again but without the MakeDir, we should get
# exactly the same result
e = Engine(cfgpath)
e.run(LineInFile(d1f1, "AAA"))
e.run(LineInFile(d1f1, "BBB"))
e.cleanup(e.POSTPONE)
del e
# the directory should still exist, the old file should not, and the new
# file should contain both lines
assert os.path.isdir(d1)
assert not os.path.exists(f1)
assert contents(d1f1) == "AAA\nBBB\n"
# the important thing to note is that the engine still knows that it needs
# to clean up the directory later
e = Engine(cfgpath)
assert e.pathstoclean()[d1] == e.TYPE_FOLDER_ONLY
del e
# if we get rid of one of the LineInFile() items, the file and dir still
# hang around
e = Engine(cfgpath)
e.run(LineInFile(d1f1, "AAA"))
e.cleanup(e.POSTPONE)
del e
assert contents(d1f1) == "AAA\n"
# now, when we get rid of the last LineInFile() items, everything will be
# cleaned up
e = Engine(cfgpath)
e.cleanup(e.RAISE)
del e
assert not os.path.exists(d1)
os.unlink(cfgpath)
# if we make a dir ourselves, a LineInFile() will not clean it up
assert not os.path.exists(d2)
os.mkdir(d2)
e = Engine(cfgpath)
e.run(LineInFile(d2f1, "AAA"))
del e
assert contents(d2f1) == "AAA\n"
e = Engine(cfgpath)
e.cleanup(e.RAISE)
del e
assert os.path.isdir(d2) and not os.path.exists(d2f1)
os.rmdir(d2)
# if we make a file ourselves, LineInFile() will not try to clean it up
assert not os.path.exists(f1)
contents(f1, "")
e = Engine(cfgpath)
e.run(LineInFile(f1, "AAA"))
del e
assert contents(f1) == "AAA\n"
e = Engine(cfgpath)
e.cleanup(e.RAISE)
del e
assert contents(f1) == ""
# if two LineInFile() items share a parent dir (even the parent dir's
# parent, and so on), and that parent dir was made by a MakeDir(), then it
# gets cleaned up eventually when both of the LineInFile() items go away
# - create the folder structure
assert not os.path.exists(d3)
os.unlink(cfgpath)
e = Engine(cfgpath)
e.run(MakeDir(d3))
e.run(MakeDir(d3d1))
e.run(MakeDir(d3d2))
e.cleanup(e.RAISE)
del e
assert all(map(os.path.isdir, [d3, d3d1, d3d2]))
assert not any(map(os.path.exists, [d3d1f1, d3d2f1]))
# - scrap the folder structure, but make files that depend on those folders
e = Engine(cfgpath)
e.run(LineInFile(d3d1f1, "AAA"))
e.run(LineInFile(d3d2f1, "BBB"))
e.cleanup(e.POSTPONE)
del e
assert contents(d3d1f1) == "AAA\n" and contents(d3d2f1) == "BBB\n"
# - scrap the first file, and check that only things needed for the 2nd
# file remain
e = Engine(cfgpath)
e.run(LineInFile(d3d2f1, "BBB"))
e.cleanup(e.POSTPONE)
del e
assert not os.path.exists(d3d1)
assert contents(d3d2f1) == "BBB\n"
# - scrap the 2nd file and make sure everything else disappears
e = Engine(cfgpath)
e.cleanup(e.RAISE)
del e
assert not os.path.exists(d3)
def test_lineinfile_usage(tmpdir):
from homely._engine2 import Engine
from homely.files import WHERE_END, WHERE_TOP, LineInFile
cfgpath = gettmpfilepath(tmpdir, '.json')
f1 = gettmpfilepath(tmpdir)
# make sure the following types of input raise exceptions
bad = [
"", # empty line
"something\n", # a string containing a newline
" \t", # a line containing nothing but whitespace
]
for b in bad:
try:
LineInFile(f1, b)
except Exception:
# we got an exception
pass
else:
raise Exception("LineInFile should not accept input %s" % repr(b))
# make sure LineInFile() doesn't override an existing line
contents(f1, "AAA\nBBB\n")
e = Engine(cfgpath)
e.run(LineInFile(f1, "BBB"))
assert contents(f1) == "AAA\nBBB\n"
# make sure LineInFile() puts a new line at the end of the file by default
e = Engine(cfgpath)
e.run(LineInFile(f1, "CCC"))
assert contents(f1) == "AAA\nBBB\nCCC\n"
# make sure LineInFile() doesn't move a line unnecessarily
e = Engine(cfgpath)
e.run(LineInFile(f1, "BBB"))
assert contents(f1) == "AAA\nBBB\nCCC\n"
# make sure LineInFile() can move a line to the TOP of the file
e = Engine(cfgpath)
e.run(LineInFile(f1, "BBB", WHERE_TOP))
assert contents(f1) == "BBB\nAAA\nCCC\n"
# make sure LineInFile() can move a line to the END of the file
e = Engine(cfgpath)
e.run(LineInFile(f1, "BBB", WHERE_END))
assert contents(f1) == "AAA\nCCC\nBBB\n"
# make sure LineInFile() doesn't blow away empty lines
# - adding to end of file
contents(f1, "\n\n", strip=False)
e = Engine(cfgpath)
e.run(LineInFile(f1, "AAA"))
assert contents(f1) == "\n\nAAA\n"
# - adding to start of file
contents(f1, "\n\n", strip=False)
e = Engine(cfgpath)
e.run(LineInFile(f1, "AAA", WHERE_TOP))
assert contents(f1) == "AAA\n\n\n"
# - when restoring the file
e = Engine(cfgpath)
e.cleanup(e.RAISE)
del e
assert contents(f1) == "\n\n"
# - replacing something in the middle
contents(f1, "\n\nAAA\n\n\n", strip=False)
e = Engine(cfgpath)
e.run(LineInFile(f1, "AAA"))
assert contents(f1) == "\n\nAAA\n\n\n"
# make sure LineInFile() respects existing line endings
# NOTE: in python2 we always use Universal Newlines when reading the file,
# which tricks us into using "\n" when writing the file
if sys.version_info[0] > 2:
# - windows
contents(f1, "AAA\r\nBBB\r\n")
e = Engine(cfgpath)
e.run(LineInFile(f1, "CCC"))
assert contents(f1) == "AAA\r\nBBB\r\nCCC\r\n"
# - mac
contents(f1, "AAA\rBBB\r")
e = Engine(cfgpath)
e.run(LineInFile(f1, "BBB", WHERE_TOP))
assert contents(f1) == "BBB\rAAA\r"
# make sure a file that starts empty is left empty after cleanup
contents(f1, "")
e = Engine(cfgpath)
e.run(LineInFile(f1, "AAA"))
assert contents(f1) == "AAA\n"
e = Engine(cfgpath)
e.cleanup(e.RAISE)
assert contents(f1) == ""