# Simple test of primitive drawing with ILI9341 TFT display. # This is made to work with ESP8266 MicroPython and the TFT FeatherWing, but # adjust the SPI and display initialization at the start to change boards. # Author: Tony DiCola # License: MIT License (https://opensource.org/licenses/MIT) import time import gfx import ili9341 import machine # Setup hardware SPI at 32mhz on ESP8266 MicroPython. spi = machine.SPI(1, baudrate=32000000) # Setup ILI9341 display using TFT FeatherWing pinout for CS & DC pins. display = ili9341.ILI9341(spi, cs=machine.Pin(0), dc=machine.Pin(15)) # Optionally create faster horizontal and vertical line drawing functions using # the display's native filled rectangle function (which updates chunks of memory # instead of pixel by pixel). def fast_hline(x, y, width, color): display.fill_rectangle(x, y, width, 1, color) def fast_vline(x, y, height, color): display.fill_rectangle(x, y, 1, height, color) # Initialize the GFX library, giving it the display pixel function as its pixel # drawing primitive command. The hline and vline parameters specify optional # optimized horizontal and vertical line drawing functions. You can remove these
import ili9341 # Import de la bibliothèque ili9341 from time import * # Nécessaire pour mesurer les temps d'affichage from machine import Pin, SPI # Bibliothèque de gestion des entrées sorties # Initialise la liaison SPI à une fréquence de 24Mhz avec 3 pins matériels dédiés PybStick26 spi = SPI(baudrate=24000000, miso=Pin("S21"), mosi=Pin("S19", Pin.OUT), sck=Pin("S23", Pin.OUT)) # Objet display basé sur la classe ILI9341 et initialisé avec le SPI et les deux derniers pins de notre montage display = ili9341.ILI9341(spi, cs=Pin("S11"), dc=Pin("S5"), rst=Pin("S3")) t0 = ticks_ms() display.fill(ili9341.color565(0x00, 0x00, 0xff)) print(ticks_ms() - t0, "ms pour afficher une page bleue")
self.last_audio.play() def stop(self): if self.last_audio: self.last_audio.stop() def mute(self, value=True): self.mute_pin.value = not value dc = digitalio.DigitalInOut(board.D10) cs = digitalio.DigitalInOut(board.D9) cs.switch_to_output(value=True) spi = busio.SPI(clock=board.SCK, MOSI=board.MOSI, MISO=board.MISO) display = ili9341.ILI9341(spi, dc, cs, 0) backlight = pulseio.PWMOut(board.D11) backlight.duty_cycle = 2**14 # buttons = gamepad.GamePad( # digitalio.DigitalInOut(board.X), # digitalio.DigitalInOut(board.DOWN), # digitalio.DigitalInOut(board.LEFT), # digitalio.DigitalInOut(board.RIGHT), # digitalio.DigitalInOut(board.UP), # digitalio.DigitalInOut(board.O), # ) buttons = gamepad.GamePad(digitalio.DigitalInOut(board.D8), spi)
#py-base 01studio import ili9341 from machine import Pin, SPI from xpt2046 import XPT2046 from time import sleep ##blk是背光引脚,可以默认悬空不接,其他引脚接上即可 #6个引脚 spi = SPI(miso=Pin(12), mosi=Pin(13, Pin.OUT), sck=Pin(14, Pin.OUT)) #240*320 #or add : scroll = True ->scroll 320*240 display = ili9341.ILI9341(spi, cs=Pin(15), dc=Pin(21), rst=Pin(33)) display.fill(ili9341.color565(0xff, 0x11, 0x22)) display.pixel(120, 160, 0) ########################## #触摸 +2个引脚 #Y1-PEN-0 #Y2-CS2-2 pen = Pin(0, Pin.OUT) pen.off() cs2 = Pin(2, Pin.OUT) cs2.off() # spi = SPI(1, baudrate=1000000) xpt = XPT2046(spi) #上述描述=spi1的接线定义,但是为软串口,也可以替换为硬串口,都能用 while True: p = xpt.get_touch(raw=True) if p is not None:
import ili9341 from machine import Pin, SPI spi = SPI(1, baudrate=40000000, polarity=0, phase=0) display = ili9341.ILI9341(spi, cs=Pin(15), dc=Pin(16), rst=None, width=320, height=240) import ili9341_fb fb = ili9341_fb.Ili9341Framebuffer(display) import ps2 ps2.init(clock=5, data=0) from fbconsole import FBConsole console = FBConsole(fb) import os os.dupterm(console) def cls(): console.cls() def on(): console.on() def off(): console.off()
def __init__(self, config): spi = SPI(1, baudrate=32000000) self.display = ili9341.ILI9341(spi, cs=Pin(15), dc=Pin(2), rst=Pin(16)) self.config = config self.rgbt = rgb_text.rgbtext(self.display)
from machine import Pin from widgets import TextArea from widgets import Graph # use VSPI (ID=2) at 80mhz spi = machine.SPI( 2, baudrate=32000000, mosi=Pin(23, Pin.OUT), # mosi = 23 miso=Pin(25, Pin.IN), # miso = 25 sck=Pin(19, Pin.OUT)) # sclk = 19 display = ili9341.ILI9341( spi, cs=Pin(22, Pin.OUT), # cs = 22 dc=Pin(21, Pin.OUT), # dc = 21 rst=Pin(18, Pin.OUT), # rst = 18 width=240, height=320) # turn on the backlight bl = Pin(5, Pin.OUT) bl.value(0) def graph(): random.seed(time.ticks_cpu() * time.ticks_us()) graph = Graph(display, 30, 24, x=10, y=50, bg=0, fg=colors.RGB_YELLOW) graph.point(10) for i in range(50): v = random.randint(0, 10)
import ntptime import gc LOG_OUT = False LOG_FILE = 'debug.log' CASE_LOG = 'cases.log' DUMMY_DATA = '20200929,25335' # URL = "https://covid19-japan-web-api.now.sh/api/v1/total" URL = "https://covid19-japan-web-api.now.sh/api/v1/prefectures" ######################### Display Config ####################### import ili9341 spi = SPI(miso=Pin(19), mosi=Pin(23, Pin.OUT), sck=Pin(18, Pin.OUT)) display = ili9341.ILI9341(spi, cs=Pin(14), dc=Pin(27), rst=Pin(33)) Pin(32, Pin.OUT).on() # back light pin COLOR565_INACTIVE = ili9341.color565(0xF0, 0xF0, 0xF0) COLOR565_ACTIVE = ili9341.color565(0x40, 0x40, 0x40) TEXT_X = 160 TEXT_Y = 120 ######################### Update behaviour ####################### TIMESTAMP_OFFSET = 3 # 3: hour, 4: min SLEEP_LENGTH_sec = 1 is_time_set = False ######################### Button Config ####################### btnA = Pin(39, Pin.IN, Pin.PULL_UP)
# MADCTL values MADCTL_MY = 0X80 MADCTL_MX = 0X40 MADCTL_MV = 0X20 MADCTL_ML = 0X10 MADCTL_RGB = 0X00 MADCTL_BGR = 0X08 MADCTL_MH = 0X04 cs = digitalio.DigitalInOut(board.D2) dc = digitalio.DigitalInOut(board.D7) spi = busio.SPI(clock=board.SCK, MOSI=board.MOSI, MISO=board.MISO) # Setup ILI9341 display using TFT FeatherWing pinout for CS & DC pins. display = ili9341.ILI9341(spi, cs=cs, dc=dc) display.newWidth(240) display.newHeight(320) gfx = GFX.GFX(240, 320, pixel=display.pixel, font_name=ariali12pt7b, dispobj=display, newWidth=display.newWidth, newHeight=display.newHeight) def testText(): gfx.setFill(BLACK)