def __init__(self, image):
self.img = image
# 随机通道处理,加减100以内
# self.aug_WithChannels = iaa.WithChannels((0,2), iaa.Add((-100, 100)))
# 随机裁剪和填充，percent为裁剪与填充比例，负数为放大后裁剪，正数为缩小和填充，pad_mode为填充方式，pad_cval为当空白填充时，填充像素值
self.aug_CropAndPad = iaa.CropAndPad(percent=(-0.05, 0.1),
pad_mode=ia.ALL,
pad_cval=(0, 255))
# 随机水平翻转,参数为概率
self.aug_Fliplr = iaa.Fliplr(0.5)
# 随机垂直翻转,参数为概率
self.aug_Flipud = iaa.Flipud(0.5)
# 超像素表示,p_replace被超像素代替的百分比,n_segments分割块数
self.aug_Superpixels = iaa.Superpixels(p_replace=(0, 1.0),
n_segments=(20, 200))
# 灰度化 (0.0,1.0),前者为偏彩色部分，后者为偏灰度部分，随机灰度化
self.aug_GrayScale = iaa.Grayscale(alpha=(0.0, 0.6))
# 高斯模糊
self.aug_GaussianBlur = iaa.GaussianBlur(sigma=(0, 3.0))
# 均值模糊，k为kernel size
self.aug_AverageBlur = iaa.AverageBlur(k=(2, 7))
# 中值模糊, k为kernel size
self.aug_MedianBlur = iaa.MedianBlur(k=(3, 11))
# 双边滤波,d为kernel size,sigma_color为颜色域标准差,sigma_space为空间域标准差
self.aug_BilateralBlur = iaa.BilateralBlur(sigma_color=(0, 250),
sigma_space=(0, 250),
d=(3, 7))
# 锐化
self.aug_Sharpen = iaa.Sharpen(alpha=(0.0, 1.0), lightness=(0.75, 2.0))
# 浮雕效果
self.aug_Emboss = iaa.Emboss(alpha=(0.0, 1.0), strength=(0.0, 1.5))
# 边缘检测
self.aug_EdgeDetect = iaa.EdgeDetect(alpha=(0.0, 1.0))
# 方向性边缘检测
self.aug_DirectedEdgeDetece = iaa.DirectedEdgeDetect(alpha=(0.0, 1.0),
direction=(0.0,
1.0))
# 暴力叠加像素值,每个像素统一加一个值
self.aug_Add = iaa.Add((-40, 40))
# 暴力叠加像素值，每个像素加不同的值
self.aug_AddElementwise = iaa.AddElementwise((-40, 40))
# 随机高斯加性噪声
self.aug_AdditiveGaussianNoise = iaa.AdditiveGaussianNoise(scale=(0.0,
0.1 *
255))
# 暴力乘法,每个像素统一乘以一个值
self.aug_Multiply = iaa.Multiply((0.8, 1.2))
# 暴力乘法,每个像素乘以不同值
self.aug_MultiplyElementwise = iaa.MultiplyElementwise((0.8, 1.2))
# 随机dropout像素值
self.aug_Dropout = iaa.Dropout(p=(0, 0.2))
# 随机粗dropout,2*2方块像素被dropout
self.aug_CoarseDropout = iaa.CoarseDropout(0.02, size_percent=0.5)
# 50%的图片,p概率反转颜色
self.aug_Invert = iaa.Invert(0.25, per_channel=0.5)
# 对比度归一化
self.aug_ContrastNormalization = iaa.ContrastNormalization((0.5, 1.5))
# 仿射变换
self.aug_Affine = iaa.Affine(rotate=(0, 20),
scale={
"x": (0.8, 1.2),
"y": (0.8, 1.2)
})
# 仿射变换, 局部像素仿射扭曲
self.aug_PiecewiseAffine = iaa.PiecewiseAffine(scale=(0.01, 0.05))
# 单应性变换
self.aug_PerspectiveTransform = iaa.PerspectiveTransform(scale=(0.01,
0.1))
# 弹性变换
self.aug_ElasticTransformation = iaa.ElasticTransformation(alpha=(0,
5.0),
sigma=0.25)
# 简单的加噪,小黑块
self.aug_SimplexNoiseAlpha = iaa.SimplexNoiseAlpha(
iaa.OneOf([
iaa.EdgeDetect(alpha=(0.0, 0.5)),
iaa.DirectedEdgeDetect(alpha=(0.0, 0.5), direction=(0.0, 1.0)),
]))
# 频域加噪，表现为色彩的块状变换
self.aug_FrequencyNoiseAlpha = iaa.FrequencyNoiseAlpha(
exponent=(-4, 0),
first=iaa.Multiply((0.5, 1.5), per_channel=True),
second=iaa.ContrastNormalization((0.5, 2.0)))
def get_augmenter(name, c_val=255, vertical_flip=True):
if name:
alot = lambda aug: iaa.Sometimes(0.75, aug)
alw = lambda aug: iaa.Sometimes(1, aug)
sometimes = lambda aug: iaa.Sometimes(0.50, aug)
few = lambda aug: iaa.Sometimes(0.10, aug)
if 'rgb' in name:
seq_rgb = iaa.Sequential([
iaa.Fliplr(0.50), # horizontally flip 50% of the images
iaa.Flipud(0.20), # vertically flip 50% of the images
sometimes(iaa.Add((-30, 30))),
sometimes(iaa.Multiply((0.80, 1.20), per_channel=False)),
sometimes(iaa.GaussianBlur(sigma=(0, 0.10))),
few(
iaa.CoarseDropout(p=(0.05, 0.15),
size_percent=(0.15, 0.35),
per_channel=True)),
few(
iaa.CoarseDropout(p=(0.05, 0.15),
size_percent=(0.15, 0.35),
per_channel=False)),
sometimes(iaa.ContrastNormalization((0.75, 1.35))),
alot(
iaa.Affine(
scale={
"x": (0.8, 1.2),
"y": (0.8, 1.2)
},
# scale images to 80-120% of their size, individually per axis
translate_percent={
"x": (-0.2, 0.2),
"y": (-0.2, 0.2)
},
# translate by -20 to +20 percent (per axis)
rotate=(-45, 45), # rotate by -45 to +45 degrees
order=1, #bilinear interpolation (fast)
cval=0,
mode=
"reflect" # `edge`, `wrap`, `reflect` or `symmetric`
# cval=(0, 255), # if mode is constant, use a cval between 0 and 255
# mode=ia.ALL # use any of scikit-image's warping modes (see 2nd image from the top for examples)
))
])
return seq_rgb
if 'coral' in name:
seq_rgb = iaa.Sequential([
iaa.Fliplr(0.50), # horizontally flip 50% of the images
iaa.Flipud(0.50), # vertically flip 50% of the images
sometimes(iaa.Add((-30, 30))),
sometimes(iaa.Multiply((0.80, 1.20), per_channel=False)),
sometimes(iaa.GaussianBlur(sigma=(0, 40))),
sometimes(iaa.ContrastNormalization((0.75, 1.35))),
alot(
iaa.Affine(
scale={
"x": (0.7, 1.3),
"y": (0.7, 1.3)
},
# scale images to 80-120% of their size, individually per axis
translate_percent={
"x": (-0.2, 0.2),
"y": (-0.2, 0.2)
},
# translate by -20 to +20 percent (per axis)
rotate=(-45, 45), # rotate by -45 to +45 degrees
order=1, #bilinear interpolation (fast)
cval=0,
mode=
"reflect" # `edge`, `wrap`, `reflect` or `symmetric`
# cval=(0, 255), # if mode is constant, use a cval between 0 and 255
# mode=ia.ALL # use any of scikit-image's warping modes (see 2nd image from the top for examples)
))
])
return seq_rgb
elif 'segmentation' in name:
#create one per image. give iamge, label and mask to the pipeling
value_flip = round(random.random())
if value_flip > 0.5:
value_flip = 1
else:
value_flip = 0
value_flip2 = round(random.random())
if value_flip2 > 0.5:
value_flip2 = 1
else:
value_flip2 = 0
value_add = random.uniform(-15, 15)
value_Multiply = random.uniform(0.9, 1.1)
value_GaussianBlur = random.uniform(0.0, 0.40)
ContrastNormalization = random.uniform(0.79, 1.35)
scale = random.uniform(0.8, 1.3)
value_x2 = random.uniform(-0.30, 0.30)
value_y2 = random.uniform(-0.20, 0.20)
val_rotate = random.uniform(-13, 13)
'''
sometimes(iaa.Add((value_add, value_add))),
sometimes(iaa.Multiply((value_Multiply, value_Multiply), per_channel=False)),
sometimes(iaa.GaussianBlur(sigma=(value_GaussianBlur, value_GaussianBlur))),
few(iaa.CoarseDropout(p=value_CoarseDropout, size_percent=(value_CoarseDropout3, value_CoarseDropout3), per_channel=True)),
few(iaa.CoarseDropout(p=value_CoarseDropout2, size_percent=(value_CoarseDropout4, value_CoarseDropout4), per_channel=False)),
sometimes(iaa.ContrastNormalization((ContrastNormalization, ContrastNormalization))),
'''
#uniform(-30, 30)
seq_image = iaa.Sequential([
iaa.Fliplr(value_flip), # horizontally flip 50% of the images
# iaa.Flipud(value_flip2), # vertically flip 50% of the images
iaa.Affine(
scale={
"x": (scale),
"y": (scale)
},
# scale images to 80-120% of their size, individually per axis
translate_percent={
"x": (value_x2),
"y": (value_y2)
},
# translate by -20 to +20 percent (per axis)
rotate=(val_rotate), # rotate by -45 to +45 degrees
order=1, #bilinear interpolation (fast)
cval=c_val,
mode="reflect",
# `edge`, `wrap`, `reflect` or `symmetric`
# cval=c_val, # if mode is constant, use a cval between 0 and 255
# mode=ia.ALL # use any of scikit-image's warping modes (see 2nd image from the top for examples)
)
])
seq_image2 = iaa.Sequential([
#sometimes(iaa.Add((value_add, value_add))),
#sometimes(iaa.Multiply((value_Multiply, value_Multiply), per_channel=False)),
sometimes(
iaa.GaussianBlur(sigma=(value_GaussianBlur,
value_GaussianBlur))),
sometimes(
iaa.ContrastNormalization(
(ContrastNormalization, ContrastNormalization)))
])
seq_label = iaa.Sequential([
iaa.Fliplr(value_flip), # horizontally flip 50% of the images
# iaa.Flipud(value_flip2), # vertically flip 50% of the images
iaa.Affine(
scale={
"x": (scale),
"y": (scale)
},
# scale images to 80-120% of their size, individually per axis
translate_percent={
"x": (value_x2),
"y": (value_y2)
},
# translate by -20 to +20 percent (per axis)
rotate=(val_rotate), # rotate by -45 to +45 degrees
order=0, #bilinear interpolation (fast)
cval=c_val,
mode="constant" # `edge`, `wrap`, `reflect` or `symmetric`
# cval=(0, 255), # if mode is constant, use a cval between 0 and 255
# mode=ia.ALL # use any of scikit-image's warping modes (see 2nd image from the top for examples)
)
])
seq_mask = iaa.Sequential([
iaa.Fliplr(value_flip), # horizontally flip 50% of the images
# iaa.Flipud(value_flip2), # vertically flip 50% of the images
iaa.Affine(
scale={
"x": (scale),
"y": (scale)
},
# scale images to 80-120% of their size, individually per axis
translate_percent={
"x": (value_x2),
"y": (value_y2)
},
# translate by -20 to +20 percent (per axis)
rotate=(val_rotate), # rotate by -45 to +45 degrees
order=0, #bilinear interpolation (fast)
cval=0,
mode="constant" # `edge`, `wrap`, `reflect` or `symmetric`
# cval=c_val, # if mode is constant, use a cval between 0 and 255
# mode=ia.ALL # use any of scikit-image's warping modes (see 2nd image from the top for examples)
)
])
return seq_image2, seq_image, seq_label, seq_mask
elif 'caltech' in name:
seq_multi = iaa.Sequential([
iaa.Fliplr(0.25), # horizontally flip 50% of the images
iaa.Flipud(0.25), # horizontally flip 50% of the images
sometimes(
iaa.Affine(
# scale images to 80-120% of their size, individually per axis
# translate by -20 to +20 percent (per axis)
scale={
"x": (0.8, 1.2),
"y": (0.8, 1.2)
},
# scale images to 80-120% of their size, individually per axis
translate_percent={
"x": (-0.20, 0.2),
"y": (-0.2, 0.2)
},
# translate by -20 to +20 percent (per axis)
rotate=(-30, 30), # rotate by -45 to +45 degrees
order=0, # use nearest neighbour
cval=127.5,
mode="constant"))
])
return seq_multi
else:
seq_multi = iaa.Sequential([
sometimes(
iaa.Affine(
# scale images to 80-120% of their size, individually per axis
# translate by -20 to +20 percent (per axis)
scale={
"x": (0.8, 1.2),
"y": (0.8, 1.2)
},
# scale images to 80-120% of their size, individually per axis
translate_percent={
"x": (-0.20, 0.2),
"y": (-0.2, 0.2)
},
# translate by -20 to +20 percent (per axis)
rotate=(-45, 45), # rotate by -45 to +45 degrees
order=0, # use nearest neighbour
cval=127.5,
mode="constant"))
])
return seq_multi
else:
return None
def _load_augmentation_aug_all():
""" Load image augmentation model """
def sometimes(aug):
return iaa.Sometimes(0.5, aug)
return iaa.Sequential(
[
# apply the following augmenters to most images
iaa.Fliplr(0.5), # horizontally flip 50% of all images
iaa.Flipud(0.2), # vertically flip 20% of all images
# crop images by -5% to 10% of their height/width
sometimes(iaa.CropAndPad(
percent=(-0.05, 0.1),
pad_mode='constant',
pad_cval=(0, 255)
)),
sometimes(iaa.Affine(
# scale images to 80-120% of their size, individually per axis
scale={"x": (0.8, 1.2), "y": (0.8, 1.2)},
# translate by -20 to +20 percent (per axis)
translate_percent={"x": (-0.2, 0.2), "y": (-0.2, 0.2)},
rotate=(-45, 45), # rotate by -45 to +45 degrees
shear=(-16, 16), # shear by -16 to +16 degrees
# use nearest neighbour or bilinear interpolation (fast)
order=[0, 1],
# if mode is constant, use a cval between 0 and 255
cval=(0, 255),
# use any of scikit-image's warping modes
# (see 2nd image from the top for examples)
mode='constant'
)),
# execute 0 to 5 of the following (less important) augmenters per
# image don't execute all of them, as that would often be way too
# strong
iaa.SomeOf((0, 5),
[
# convert images into their superpixel representation
sometimes(iaa.Superpixels(
p_replace=(0, 1.0), n_segments=(20, 200))),
iaa.OneOf([
# blur images with a sigma between 0 and 3.0
iaa.GaussianBlur((0, 3.0)),
# blur image using local means with kernel sizes
# between 2 and 7
iaa.AverageBlur(k=(2, 7)),
# blur image using local medians with kernel sizes
# between 2 and 7
iaa.MedianBlur(k=(3, 11)),
]),
iaa.Sharpen(alpha=(0, 1.0), lightness=(
0.75, 1.5)), # sharpen images
iaa.Emboss(alpha=(0, 1.0), strength=(
0, 2.0)), # emboss images
# search either for all edges or for directed edges,
# blend the result with the original image using a blobby mask
iaa.SimplexNoiseAlpha(iaa.OneOf([
iaa.EdgeDetect(alpha=(0.5, 1.0)),
iaa.DirectedEdgeDetect(
alpha=(0.5, 1.0), direction=(0.0, 1.0)),
])),
# add gaussian noise to images
iaa.AdditiveGaussianNoise(loc=0, scale=(
0.0, 0.05*255), per_channel=0.5),
iaa.OneOf([
# randomly remove up to 10% of the pixels
iaa.Dropout((0.01, 0.1), per_channel=0.5),
iaa.CoarseDropout((0.03, 0.15), size_percent=(
0.02, 0.05), per_channel=0.2),
]),
# invert color channels
iaa.Invert(0.05, per_channel=True),
# change brightness of images (by -10 to 10 of original value)
iaa.Add((-10, 10), per_channel=0.5),
# change hue and saturation
iaa.AddToHueAndSaturation((-20, 20)),
# either change the brightness of the whole image (sometimes
# per channel) or change the brightness of subareas
iaa.OneOf([
iaa.Multiply(
(0.5, 1.5), per_channel=0.5),
iaa.FrequencyNoiseAlpha(
exponent=(-4, 0),
first=iaa.Multiply(
(0.5, 1.5), per_channel=True),
second=iaa.ContrastNormalization(
(0.5, 2.0))
)
]),
# improve or worsen the contrast
iaa.ContrastNormalization((0.5, 2.0), per_channel=0.5),
iaa.Grayscale(alpha=(0.0, 1.0)),
# move pixels locally around (with random strengths)
sometimes(iaa.ElasticTransformation(
alpha=(0.5, 3.5), sigma=0.25)),
# sometimes move parts of the image around
sometimes(iaa.PiecewiseAffine(scale=(0.01, 0.05))),
sometimes(iaa.PerspectiveTransform(scale=(0.01, 0.1)))
],
random_order=True
)
],
random_order=True
)
def __init__(self, path='/'):
configMain.__init__(self)
st = lambda aug: iaa.Sometimes(0.2, aug)
oc = lambda aug: iaa.Sometimes(0.1, aug)
rl = lambda aug: iaa.Sometimes(0.05, aug)
self.augment = [
iaa.Sequential(
[
rl(iaa.GaussianBlur(
(0,
1.3))), # blur images with a sigma between 0 and 1.5
rl(
iaa.AdditiveGaussianNoise(
loc=0, scale=(0.0, 0.05),
per_channel=0.5)), # add gaussian noise to images
rl(iaa.Dropout((0.0, 0.10), per_channel=0.5)
), # randomly remove up to X% of the pixels
oc(
iaa.Add((-20, 20), per_channel=0.5)
), # change brightness of images (by -X to Y of original value)
st(iaa.Multiply(
(0.25, 2.5), per_channel=0.2
)), # change brightness of images (X-Y% of original value)
rl(iaa.ContrastNormalization(
(0.5, 1.5),
per_channel=0.5)), # improve or worsen the contrast
rl(iaa.Grayscale((0.0, 1))), # put grayscale
],
random_order=True # do all of the above in random order
),
iaa.Sequential(
[ # AUGMENTATION Labels
rl(iaa.Dropout(
(0.0,
0.03))), # randomly remove up to X% of the pixels
rl(iaa.CoarseDropout((0.0, 0.03), size_percent=(
0.2, 0.3))), # randomly remove up to X% of the pixels
],
random_order=True # do all of the above in random order
)
]
# self.augment = [None]
# there are files with data, 200 images each, and here we select which ones to use
self.dataset_name = 'Carla'
train_path = os.path.join(path, 'RC28_wpz_M')
val_path = os.path.join(path, 'RC025Val')
print(train_path)
self.train_db_path = [
os.path.join(train_path, f)
for f in glob.glob1(train_path, "data_*.h5")
]
self.val_db_path = [
os.path.join(val_path, f)
for f in glob.glob1(val_path, "data_*.h5")
]
# Speed Divide Factor
# TODO: FOr now is hardcooded, but eventually we should be able to calculate this from data at the loading time.
self.speed_factor = 40.0 # In KM/H FOR GTA it should be maximun 30.0
# The division is made by three diferent data kinds
# in every mini-batch there will be equal number of samples with labels from each group
# e.g. for [[0,1],[2]] there will be 50% samples with labels 0 and 1, and 50% samples with label 2
self.labels_per_division = [[0, 2, 5], [3], [4]]
self.dataset_names = ['targets']
self.queue_capacity = 20 * self.batch_size
def __init__(self):
configMain.__init__(self)
st = lambda aug: iaa.Sometimes(0.4, aug)
oc = lambda aug: iaa.Sometimes(0.3, aug)
rl = lambda aug: iaa.Sometimes(0.09, aug)
self.augment = iaa.Sequential(
[
rl(iaa.GaussianBlur(
(0, 1.5))), # blur images with a sigma between 0 and 1.5
rl(
iaa.AdditiveGaussianNoise(
loc=0, scale=(0.0, 0.05),
per_channel=0.5)), # add gaussian noise to images
rl(iaa.Dropout((0.0, 0.03), per_channel=0.5)
), # randomly remove up to X% of the pixels
oc(
iaa.Add((-20, 30), per_channel=0.5)
), # change brightness of images (by -X to Y of original value)
st(iaa.Multiply((0.25, 2.5), per_channel=0.2)
), # change brightness of images (X-Y% of original value)
rl(iaa.ContrastNormalization(
(0.5, 1.5),
per_channel=0.5)), # improve or worsen the contrast
rl(iaa.Grayscale((0.0, 1))), # put grayscale
],
random_order=True # do all of the above in random order
)
# there are files with data, 200 images each, and here we select which ones to use
self.valid_pos_train = range(0, 993)
self.valid_pos_val = range(
0, 101) # validation data is in a different folder
self.save_data_stats = 'data_stats/' # the 'data_stats/path' file points to the location of the data
with open(self.save_data_stats + 'path', 'r') as f:
path = f.read()
self.train_db_path = [
path[:-1] + 'SeqTrain/data_' + str(i).zfill(5) + '.h5'
for i in self.valid_pos_train
]
self.val_db_path = [
path[:-1] + 'SeqVal/data_' + str(i).zfill(5) + '.h5'
for i in self.valid_pos_val
] #+ ['/media/adas/DISCODADOS/DeepDriveData/train_'+str(i).zfill(4)+'_M'+'.h5' for i in valid_pos_train]
# When using data with noise, remove the recording during the first half of the noise impulse
# TODO Felipe: change to noise percentage.
self.remove_noise = False
# Speed Divide Factor
#TODO: FOr now is hardcooded, but eventually we should be able to calculate this from data at the loading time.
self.speed_factor = 50.0 # In KM/H
# The division is made by three diferent data kinds
# in every mini-batch there will be equal number of samples with labels from each group
# e.g. for [[0,1],[2]] there will be 50% samples with labels 0 and 1, and 50% samples with label 2
self.labels_per_division = [[0, 2, 5], [3], [4]]
self.dataset_names = ['targets']
self.queue_capacity = 20 * self.batch_size
# TODO NOT IMPLEMENTED Felipe: True/False switches to turn data balancing on or off
self.balances_val = True
self.balances_train = True
per_channel=0.2),
]),
iaa.Invert(0.05, per_channel=True), # invert color channels
iaa.Add(
(-10, 10), per_channel=0.5
), # change brightness of images (by -10 to 10 of original value)
iaa.AddToHueAndSaturation(
(-20, 20)), # change hue and saturation
# either change the brightness of the whole image (sometimes
# per channel) or change the brightness of subareas
iaa.OneOf([
iaa.Multiply((0.5, 1.5), per_channel=0.5),
iaa.FrequencyNoiseAlpha(exponent=(-4, 0),
first=iaa.Multiply(
(0.5, 1.5), per_channel=True),
second=iaa.ContrastNormalization(
(0.5, 2.0)))
]),
iaa.ContrastNormalization(
(0.5, 2.0),
per_channel=0.5), # improve or worsen the contrast
iaa.Grayscale(alpha=(0.0, 1.0)),
sometimes(
iaa.ElasticTransformation(alpha=(0.5, 3.5), sigma=0.25)
), # move pixels locally around (with random strengths)
sometimes(iaa.PiecewiseAffine(scale=(
0.01, 0.05))), # sometimes move parts of the image around
sometimes(iaa.PerspectiveTransform(scale=(0.01, 0.1)))
],
random_order=True)
],
random_order=True)
def __init__(self, images,
config,
shuffle=True,
jitter=True,
norm=None):
self.generator = None
self.images = images
self.config = config
self.shuffle = shuffle
self.jitter = jitter
self.norm = norm
self.anchors = [BoundBox(0, 0, config['ANCHORS'][2*i], config['ANCHORS'][2*i+1]) for i in range(int(len(config['ANCHORS'])//2))]
### augmentors by https://github.com/aleju/imgaug
sometimes = lambda aug: iaa.Sometimes(0.5, aug)
# Define our sequence of augmentation steps that will be applied to every image
# All augmenters with per_channel=0.5 will sample one value _per image_
# in 50% of all cases. In all other cases they will sample new values
# _per channel_.
self.aug_pipe = iaa.Sequential(
[
# apply the following augmenters to most images
#iaa.Fliplr(0.5), # horizontally flip 50% of all images
#iaa.Flipud(0.2), # vertically flip 20% of all images
#sometimes(iaa.Crop(percent=(0, 0.1))), # crop images by 0-10% of their height/width
sometimes(iaa.Affine(
#scale={"x": (0.8, 1.2), "y": (0.8, 1.2)}, # scale images to 80-120% of their size, individually per axis
#translate_percent={"x": (-0.2, 0.2), "y": (-0.2, 0.2)}, # translate by -20 to +20 percent (per axis)
#rotate=(-5, 5), # rotate by -45 to +45 degrees
#shear=(-5, 5), # shear by -16 to +16 degrees
#order=[0, 1], # use nearest neighbour or bilinear interpolation (fast)
#cval=(0, 255), # if mode is constant, use a cval between 0 and 255
#mode=ia.ALL # use any of scikit-image's warping modes (see 2nd image from the top for examples)
)),
# execute 0 to 5 of the following (less important) augmenters per image
# don't execute all of them, as that would often be way too strong
iaa.SomeOf((0, 5),
[
#sometimes(iaa.Superpixels(p_replace=(0, 1.0), n_segments=(20, 200))), # convert images into their superpixel representation
iaa.OneOf([
iaa.GaussianBlur((0, 3.0)), # blur images with a sigma between 0 and 3.0
iaa.AverageBlur(k=(2, 7)), # blur image using local means with kernel sizes between 2 and 7
iaa.MedianBlur(k=(3, 11)), # blur image using local medians with kernel sizes between 2 and 7
]),
iaa.Sharpen(alpha=(0, 1.0), lightness=(0.75, 1.5)), # sharpen images
#iaa.Emboss(alpha=(0, 1.0), strength=(0, 2.0)), # emboss images
# search either for all edges or for directed edges
#sometimes(iaa.OneOf([
# iaa.EdgeDetect(alpha=(0, 0.7)),
# iaa.DirectedEdgeDetect(alpha=(0, 0.7), direction=(0.0, 1.0)),
#])),
iaa.AdditiveGaussianNoise(loc=0, scale=(0.0, 0.05*255), per_channel=0.5), # add gaussian noise to images
iaa.OneOf([
iaa.Dropout((0.01, 0.1), per_channel=0.5), # randomly remove up to 10% of the pixels
#iaa.CoarseDropout((0.03, 0.15), size_percent=(0.02, 0.05), per_channel=0.2),
]),
#iaa.Invert(0.05, per_channel=True), # invert color channels
iaa.Add((-10, 10), per_channel=0.5), # change brightness of images (by -10 to 10 of original value)
iaa.Multiply((0.5, 1.5), per_channel=0.5), # change brightness of images (50-150% of original value)
iaa.ContrastNormalization((0.5, 2.0), per_channel=0.5), # improve or worsen the contrast
#iaa.Grayscale(alpha=(0.0, 1.0)),
#sometimes(iaa.ElasticTransformation(alpha=(0.5, 3.5), sigma=0.25)), # move pixels locally around (with random strengths)
#sometimes(iaa.PiecewiseAffine(scale=(0.01, 0.05))) # sometimes move parts of the image around
],
random_order=True
)
],
random_order=True
)
if shuffle: np.random.shuffle(self.images)
def __init__(self,
path="../mocap_syndata/multiview_data",
num_camera=4,
load_joints=17,
invalid_joints=(),
bbox=None,
image_shape=[384, 384],
train=False,
test=False,
with_aug=False):
"""
invalid_joints: tuple of indices for invalid joints; associated joints will not be used in evaluation.
bbox: [upper_left_x, upper_left_y, lower_right-x, lower_right_y].
image_size: [width, height].
with_aug: use or not image augmentation.
"""
assert train or test
train_subj = ['S0map', 'S0rand', 'S0real', \
'S1map', 'S1rand', 'S1real', \
'S2map', 'S2rand', 'S2real', \
'S3map', 'S3rand', 'S3real']
test_subj = ['S4map', 'S4rand', 'S4real', \
'S5map', 'S5rand', 'S5real']
if train:
self.subj = train_subj
elif test:
self.subj = test_subj
self.basepath = path
# self.subj = sorted(os.listdir(self.basepath))
self.framelist = []
self.camera_names = []
self.cameras = {}
self.len = 0
self.invalid_jnts = () if invalid_joints is None else invalid_joints
self.image_shape = image_shape
# torchvision transforms
# self.transform = tv.transforms.Compose([
# tv.transforms.ToTensor(),
# tv.transforms.Normalize(IMAGENET_MEAN, IMAGENET_STD)
# ])
# joint names
self.joints_name = datasets_utils.get_joints_name(load_joints)
self.num_jnts = len(self.joints_name)
# assert self.num_jnts == load_joints
for camera_idx in range(num_camera):
self.camera_names.append("%04d" % camera_idx)
for (subj_idx, subj_name) in enumerate(self.subj):
subj_path = os.path.join(self.basepath, subj_name)
anims = sorted(os.listdir(subj_path)) # animation list
cams_subj = {
} # dict to store camera params for each subject, where keys are anim indices
for anim_name in anims:
anim_idx = int(anim_name.split('_')[1]) # animation index
anim_path = os.path.join(subj_path, anim_name)
files = sorted(os.listdir(anim_path))
cams = {
} # dict to store camera params for each subject with each animations
for f in files:
f_path = os.path.join(anim_path, f)
if not os.path.isdir(f_path):
f_fn = os.path.splitext(f)[
0] # filename without extension
if ('camera' in f_fn) and (f_fn.split('_')[1]
in self.camera_names):
# load cameras
camera_idx = self.camera_names.index(
f_fn.split('_')[1])
cam = datasets_utils.load_camera(f_path)
cams[camera_idx] = cam
elif 'skeleton' in f_fn:
# record frame list
frame_idx = f_fn.split('_')[1]
self.framelist.append(
[subj_idx, anim_idx,
int(frame_idx), bbox])
self.len += 1
cams_subj[anim_idx] = cams
self.cameras[subj_idx] = cams_subj
# augmentation
self.aug = None
if train and with_aug:
sometimes = lambda aug: iaa.Sometimes(0.5, aug)
self.aug = iaa.Sequential(
[
sometimes(
iaa.Affine(
scale={
"x": (0.75, 1.25),
"y": (0.75, 1.25)
}, # scale to 75-125% of image height/width (each axis independently)
translate_percent={
"x": (-0.05, 0.05),
"y": (-0.05, 0.05)
}, # translate by -5 to +5 relative to height/width (per axis)
rotate=(-30, 30), # rotate by -30 to +30 degrees
shear=(-20, 20), # shear by -20 to +20 degrees
order=[
0, 1
], # use nearest neighbour or bilinear interpolation (fast)
cval=(
0, 255
), # if the mode is constant, then use a random brightness for the newly created pixels
mode=
'constant' # use any available mode to fill newly created pixels, see API or scikit-image for which modes are available
)),
sometimes(
iaa.AdditiveGaussianNoise(scale=0.5 * 2,
per_channel=0.5)),
sometimes(iaa.GaussianBlur(sigma=(1.0, 5.0))),
sometimes(
iaa.ContrastNormalization(
(0.8, 1.25),
per_channel=0.5)) # improve or worsen the contrast
],
random_order=True)
def main():
IN_JSON = 'dataset_descriptions/iamondb_generated_dates_10k.json'
OUT_JSON = 'dataset_descriptions/iamondb_generated_dates_resized_aug2_10k.json'
IMG_IN_DIR = 'datasets/tars'
IMG_OUT_DIR = 'datasets/'
SCALE_FACTOR = 2 # How much bigger the new dataset should be
SAVE_ORIGINAL = False
TARGET_DIMENSIONS = (216, 64)
new_image_infos = []
with open(IN_JSON, 'r') as json_file:
json_images = json.load(json_file)
image_infos = copy.deepcopy(json_images)
for idx in range(0, len(image_infos)):
image_infos[idx]['path'] = os.path.join(
IMG_IN_DIR, os.path.basename(image_infos[idx]['path']))
seq = iaa.Sequential(
[
iaa.Sometimes(0.5, iaa.GaussianBlur(
sigma=(0, 0.5))), # Small blur on half of the images
iaa.ContrastNormalization((0.75, 1.5)), # Change in contrast
iaa.AdditiveGaussianNoise(
loc=0, scale=(0.0, 0.05 * 255),
per_channel=0.5), # Gaussian Noise can change colour
iaa.Multiply((0.8, 1.2), per_channel=0.2) #, # brighter/darker
# iaa.Affine(
# rotate=(-10, 10),
# shear=(-20, 20),
# fit_output=True,
# ),
# iaa.PiecewiseAffine(scale=(0.01, 0.05), mode='edge')
],
random_order=True) # apply augmenters in random order
images = np.array(
[np.array(Image.open(img['path'])) for img in image_infos])
images = np.repeat(images, SCALE_FACTOR, axis=0)
image_infos = np.repeat(np.array(image_infos), SCALE_FACTOR, axis=0)
# Make batches out of single images because processing multiple images at once leads to errors because the resulting
# images have different shapes and therefore can't be organised in a numpy array -> leads to an internal error
for idx, img in enumerate(images):
old_filename = os.path.splitext(
os.path.basename(image_infos[idx]['path']))[0]
new_filename = old_filename + '-' + str(idx % SCALE_FACTOR +
1) + '.png'
new_img_path = os.path.join(IMG_OUT_DIR, new_filename)
if SAVE_ORIGINAL and idx % SCALE_FACTOR == 0:
with open(os.path.join(IMG_OUT_DIR, old_filename + '.png'),
'wb+') as orig_img_file:
resize_img(Image.fromarray(img),
TARGET_DIMENSIONS).save(orig_img_file, format='PNG')
padded_img = resize_img(Image.fromarray(img),
TARGET_DIMENSIONS,
padding_color=255)
img_aug = seq(images=np.expand_dims(np.asarray(padded_img), axis=0))
pil_img = Image.fromarray(np.squeeze(img_aug)).convert('L')
with open(new_img_path, 'wb+') as img_file:
pil_img.save(img_file, format='PNG')
new_image_infos.append({
"string": image_infos[idx]['string'],
"type": image_infos[idx]['type'],
"path": new_img_path
})
with open(OUT_JSON, 'w') as out_json:
if SAVE_ORIGINAL:
assert os.path.split(json_images[0]['path'])[0] == os.path.split(new_image_infos[0]['path'])[0],\
"Original path differs from new path"
json.dump(json_images + new_image_infos,
out_json,
ensure_ascii=False,
indent=4)
else:
json.dump(new_image_infos, out_json, ensure_ascii=False, indent=4)
print(
f'Created {len(new_image_infos)} new images (original: {len(json_images)})'
)
def test_dtype_preservation():
reseed()
size = (4, 16, 16, 3)
images = [
np.random.uniform(0, 255, size).astype(np.uint8),
np.random.uniform(0, 65535, size).astype(np.uint16),
np.random.uniform(0, 4294967295, size).astype(np.uint32),
np.random.uniform(-128, 127, size).astype(np.int16),
np.random.uniform(-32768, 32767, size).astype(np.int32),
np.random.uniform(0.0, 1.0, size).astype(np.float32),
np.random.uniform(-1000.0, 1000.0, size).astype(np.float16),
np.random.uniform(-1000.0, 1000.0, size).astype(np.float32),
np.random.uniform(-1000.0, 1000.0, size).astype(np.float64)
]
default_dtypes = set([arr.dtype for arr in images])
# Some dtypes are here removed per augmenter, because the respective
# augmenter does not support them. This test currently only checks whether
# dtypes are preserved from in- to output for all dtypes that are supported
# per augmenter.
# dtypes are here removed via list comprehension instead of
# `default_dtypes - set([dtype])`, because the latter one simply never
# removed the dtype(s) for some reason?!
def _not_dts(dts):
return [dt for dt in default_dtypes if dt not in dts]
augs = [
(iaa.Add((-5, 5),
name="Add"), _not_dts([np.uint32, np.int32, np.float64])),
(iaa.AddElementwise((-5, 5), name="AddElementwise"),
_not_dts([np.uint32, np.int32, np.float64])),
(iaa.AdditiveGaussianNoise(0.01 * 255, name="AdditiveGaussianNoise"),
_not_dts([np.uint32, np.int32, np.float64])),
(iaa.Multiply((0.95, 1.05), name="Multiply"),
_not_dts([np.uint32, np.int32, np.float64])),
(iaa.Dropout(0.01, name="Dropout"),
_not_dts([np.uint32, np.int32, np.float64])),
(iaa.CoarseDropout(0.01, size_px=6, name="CoarseDropout"),
_not_dts([np.uint32, np.int32, np.float64])),
(iaa.Invert(0.01, per_channel=True, name="Invert"), default_dtypes),
(iaa.ContrastNormalization(
(0.95, 1.05), name="ContrastNormalization"), default_dtypes),
(iaa.GaussianBlur(sigma=(0.95, 1.05),
name="GaussianBlur"), _not_dts([np.float16])),
(iaa.AverageBlur((3, 5), name="AverageBlur"),
_not_dts([np.uint32, np.int32, np.float16])),
(iaa.MedianBlur((3, 5), name="MedianBlur"),
_not_dts([np.uint32, np.int32, np.float16, np.float64])),
(iaa.BilateralBlur((3, 5), name="BilateralBlur"),
_not_dts([
np.uint16, np.uint32, np.int16, np.int32, np.float16, np.float64
])),
# WithColorspace ?
# iaa.AddToHueAndSaturation((-5, 5), name="AddToHueAndSaturation"), # works only with RGB/uint8
# ChangeColorspace ?
# iaa.Grayscale((0.0, 0.1), name="Grayscale"), # works only with RGB/uint8
# Convolve ?
(iaa.Sharpen((0.0, 0.1), lightness=(1.0, 1.2), name="Sharpen"),
_not_dts([np.uint32, np.int32, np.float16, np.uint32])),
(iaa.Emboss(alpha=(0.0, 0.1), strength=(0.5, 1.5), name="Emboss"),
_not_dts([np.uint32, np.int32, np.float16, np.uint32])),
(iaa.EdgeDetect(alpha=(0.0, 0.1), name="EdgeDetect"),
_not_dts([np.uint32, np.int32, np.float16, np.uint32])),
(iaa.DirectedEdgeDetect(alpha=(0.0, 0.1),
direction=0,
name="DirectedEdgeDetect"),
_not_dts([np.uint32, np.int32, np.float16, np.uint32])),
(iaa.Fliplr(0.5, name="Fliplr"), default_dtypes),
(iaa.Flipud(0.5, name="Flipud"), default_dtypes),
(iaa.Affine(translate_px=(-5, 5), name="Affine-translate-px"),
_not_dts([np.uint32, np.int32])),
(iaa.Affine(translate_percent=(-0.05, 0.05),
name="Affine-translate-percent"),
_not_dts([np.uint32, np.int32])),
(iaa.Affine(rotate=(-20, 20),
name="Affine-rotate"), _not_dts([np.uint32, np.int32])),
(iaa.Affine(shear=(-20, 20),
name="Affine-shear"), _not_dts([np.uint32, np.int32])),
(iaa.Affine(scale=(0.9, 1.1),
name="Affine-scale"), _not_dts([np.uint32, np.int32])),
(iaa.PiecewiseAffine(scale=(0.001, 0.005),
name="PiecewiseAffine"), default_dtypes),
# (iaa.PerspectiveTransform(scale=(0.01, 0.10), name="PerspectiveTransform"), not_dts([np.uint32])),
(iaa.ElasticTransformation(alpha=(0.1, 0.2),
sigma=(0.1, 0.2),
name="ElasticTransformation"),
_not_dts([np.float16])),
(iaa.Sequential([iaa.Noop(), iaa.Noop()],
name="SequentialNoop"), default_dtypes),
(iaa.SomeOf(1, [iaa.Noop(), iaa.Noop()],
name="SomeOfNoop"), default_dtypes),
(iaa.OneOf([iaa.Noop(), iaa.Noop()],
name="OneOfNoop"), default_dtypes),
(iaa.Sometimes(0.5, iaa.Noop(), name="SometimesNoop"), default_dtypes),
(iaa.Sequential([iaa.Add(
(-5, 5)), iaa.AddElementwise((-5, 5))],
name="Sequential"),
_not_dts([np.uint32, np.int32, np.float64])),
(iaa.SomeOf(1, [iaa.Add(
(-5, 5)), iaa.AddElementwise((-5, 5))],
name="SomeOf"), _not_dts([np.uint32, np.int32,
np.float64])),
(iaa.OneOf([iaa.Add(
(-5, 5)), iaa.AddElementwise((-5, 5))],
name="OneOf"), _not_dts([np.uint32, np.int32, np.float64])),
(iaa.Sometimes(0.5, iaa.Add((-5, 5)), name="Sometimes"),
_not_dts([np.uint32, np.int32, np.float64])),
# WithChannels
(iaa.Noop(name="Noop"), default_dtypes),
# Lambda
# AssertLambda
# AssertShape
(iaa.Alpha((0.0, 0.1), iaa.Noop(), name="AlphaNoop"), default_dtypes),
(iaa.AlphaElementwise((0.0, 0.1),
iaa.Noop(),
name="AlphaElementwiseNoop"), default_dtypes),
(iaa.SimplexNoiseAlpha(iaa.Noop(),
name="SimplexNoiseAlphaNoop"), default_dtypes),
(iaa.FrequencyNoiseAlpha(exponent=(-2, 2),
first=iaa.Noop(),
name="SimplexNoiseAlphaNoop"),
default_dtypes),
(iaa.Alpha((0.0, 0.1), iaa.Add(10),
name="Alpha"), _not_dts([np.uint32, np.int32, np.float64])),
(iaa.AlphaElementwise((0.0, 0.1), iaa.Add(10),
name="AlphaElementwise"),
_not_dts([np.uint32, np.int32, np.float64])),
(iaa.SimplexNoiseAlpha(iaa.Add(10), name="SimplexNoiseAlpha"),
_not_dts([np.uint32, np.int32, np.float64])),
(iaa.FrequencyNoiseAlpha(exponent=(-2, 2),
first=iaa.Add(10),
name="SimplexNoiseAlpha"),
_not_dts([np.uint32, np.int32, np.float64])),
(iaa.Superpixels(p_replace=0.01, n_segments=64),
_not_dts([np.float16, np.float32, np.float64])),
(iaa.Resize({
"height": 4,
"width": 4
}, name="Resize"),
_not_dts([
np.uint16, np.uint32, np.int16, np.int32, np.float32, np.float16,
np.float64
])),
(iaa.CropAndPad(px=(-10, 10), name="CropAndPad"),
_not_dts([
np.uint16, np.uint32, np.int16, np.int32, np.float32, np.float16,
np.float64
])),
(iaa.Pad(px=(0, 10), name="Pad"),
_not_dts([
np.uint16, np.uint32, np.int16, np.int32, np.float32, np.float16,
np.float64
])),
(iaa.Crop(px=(0, 10), name="Crop"),
_not_dts([
np.uint16, np.uint32, np.int16, np.int32, np.float32, np.float16,
np.float64
]))
]
for (aug, allowed_dtypes) in augs:
# print("aug", aug.name)
# print("allowed_dtypes", allowed_dtypes)
for images_i in images:
if images_i.dtype in allowed_dtypes:
# print("image dt", images_i.dtype)
images_aug = aug.augment_images(images_i)
assert images_aug.dtype == images_i.dtype
else:
# print("image dt", images_i.dtype, "[SKIPPED]")
pass
def soft(image_iteration):
iteration = image_iteration / (120 * 1.5)
frequency_factor = 0.05 + float(iteration) / 1200000.0
color_factor = float(iteration) / 1200000.0
dropout_factor = 0.198667 + (0.03856658 -
0.198667) / (1 +
(iteration / 196416.6)**1.863486)
blur_factor = 0.5 + (0.5 * iteration / 120000.0)
add_factor = 10 + 10 * iteration / 170000.0
multiply_factor_pos = 1 + (2.5 * iteration / 800000.0)
multiply_factor_neg = 1 - (0.91 * iteration / 800000.0)
contrast_factor_pos = 1 + (0.5 * iteration / 800000.0)
contrast_factor_neg = 1 - (0.5 * iteration / 800000.0)
#print ('iteration',iteration,'Augment Status ',frequency_factor,color_factor,dropout_factor,blur_factor,add_factor,
# multiply_factor_pos,multiply_factor_neg,contrast_factor_pos,contrast_factor_neg)
augmenter = iaa.Sequential(
[
iaa.Sometimes(frequency_factor, iaa.GaussianBlur(
(0, blur_factor))),
# blur images with a sigma between 0 and 1.5
iaa.Sometimes(
frequency_factor,
iaa.AdditiveGaussianNoise(loc=0,
scale=(0.0, dropout_factor),
per_channel=color_factor)),
# add gaussian noise to images
iaa.Sometimes(
frequency_factor,
iaa.CoarseDropout((0.0, dropout_factor),
size_percent=(0.08, 0.2),
per_channel=color_factor)),
# randomly remove up to X% of the pixels
iaa.Sometimes(
frequency_factor,
iaa.Dropout((0.0, dropout_factor), per_channel=color_factor)),
# randomly remove up to X% of the pixels
iaa.Sometimes(
frequency_factor,
iaa.Add((-add_factor, add_factor), per_channel=color_factor)),
# change brightness of images (by -X to Y of original value)
iaa.Sometimes(
frequency_factor,
iaa.Multiply((multiply_factor_neg, multiply_factor_pos),
per_channel=color_factor)),
# change brightness of images (X-Y% of original value)
iaa.Sometimes(
frequency_factor,
iaa.ContrastNormalization(
(contrast_factor_neg, contrast_factor_pos),
per_channel=color_factor)),
# improve or worsen the contrast
iaa.Sometimes(frequency_factor, iaa.Grayscale(
(0.0, 1))), # put grayscale
],
random_order=True # do all of the above in random order
)
return augmenter
def test_determinism():
reseed()
images = [
ia.quokka(size=(128, 128)),
ia.quokka(size=(64, 64)),
ia.imresize_single_image(skimage.data.astronaut(), (128, 256))
]
images.extend([ia.quokka(size=(16, 16))] * 20)
keypoints = [
ia.KeypointsOnImage([
ia.Keypoint(x=20, y=10),
ia.Keypoint(x=5, y=5),
ia.Keypoint(x=10, y=43)
],
shape=(50, 60, 3))
] * 20
augs = [
iaa.Sequential([iaa.Fliplr(0.5), iaa.Flipud(0.5)]),
iaa.SomeOf(1, [iaa.Fliplr(0.5), iaa.Flipud(0.5)]),
iaa.OneOf([iaa.Fliplr(0.5), iaa.Flipud(0.5)]),
iaa.Sometimes(0.5, iaa.Fliplr(1.0)),
iaa.WithColorspace("HSV", children=iaa.Add((-50, 50))),
# iaa.WithChannels([0], iaa.Add((-50, 50))),
# iaa.Noop(name="Noop-nochange"),
# iaa.Lambda(
# func_images=lambda images, random_state, parents, hooks: images,
# func_keypoints=lambda keypoints_on_images, random_state, parents, hooks: keypoints_on_images,
# name="Lambda-nochange"
# ),
# iaa.AssertLambda(
# func_images=lambda images, random_state, parents, hooks: True,
# func_keypoints=lambda keypoints_on_images, random_state, parents, hooks: True,
# name="AssertLambda-nochange"
# ),
# iaa.AssertShape(
# (None, None, None, 3),
# check_keypoints=False,
# name="AssertShape-nochange"
# ),
iaa.Resize((0.5, 0.9)),
iaa.CropAndPad(px=(-50, 50)),
iaa.Pad(px=(1, 50)),
iaa.Crop(px=(1, 50)),
iaa.Fliplr(0.5),
iaa.Flipud(0.5),
iaa.Superpixels(p_replace=(0.25, 1.0), n_segments=(16, 128)),
# iaa.ChangeColorspace(to_colorspace="GRAY"),
iaa.Grayscale(alpha=(0.1, 1.0)),
iaa.GaussianBlur((0.1, 3.0)),
iaa.AverageBlur((3, 11)),
iaa.MedianBlur((3, 11)),
# iaa.Convolve(np.array([[0, 1, 0],
# [1, -4, 1],
# [0, 1, 0]])),
iaa.Sharpen(alpha=(0.1, 1.0), lightness=(0.8, 1.2)),
iaa.Emboss(alpha=(0.1, 1.0), strength=(0.8, 1.2)),
iaa.EdgeDetect(alpha=(0.1, 1.0)),
iaa.DirectedEdgeDetect(alpha=(0.1, 1.0), direction=(0.0, 1.0)),
iaa.Add((-50, 50)),
iaa.AddElementwise((-50, 50)),
iaa.AdditiveGaussianNoise(scale=(0.1, 1.0)),
iaa.Multiply((0.6, 1.4)),
iaa.MultiplyElementwise((0.6, 1.4)),
iaa.Dropout((0.3, 0.5)),
iaa.CoarseDropout((0.3, 0.5), size_percent=(0.05, 0.2)),
iaa.Invert(0.5),
iaa.ContrastNormalization((0.6, 1.4)),
iaa.Affine(scale=(0.7, 1.3),
translate_percent=(-0.1, 0.1),
rotate=(-20, 20),
shear=(-20, 20),
order=ia.ALL,
mode=ia.ALL,
cval=(0, 255)),
iaa.PiecewiseAffine(scale=(0.1, 0.3)),
iaa.ElasticTransformation(alpha=0.5)
]
augs_affect_geometry = [
iaa.Sequential([iaa.Fliplr(0.5), iaa.Flipud(0.5)]),
iaa.SomeOf(1, [iaa.Fliplr(0.5), iaa.Flipud(0.5)]),
iaa.OneOf([iaa.Fliplr(0.5), iaa.Flipud(0.5)]),
iaa.Sometimes(0.5, iaa.Fliplr(1.0)),
iaa.Resize((0.5, 0.9)),
iaa.CropAndPad(px=(-50, 50)),
iaa.Pad(px=(1, 50)),
iaa.Crop(px=(1, 50)),
iaa.Fliplr(0.5),
iaa.Flipud(0.5),
iaa.Affine(scale=(0.7, 1.3),
translate_percent=(-0.1, 0.1),
rotate=(-20, 20),
shear=(-20, 20),
order=ia.ALL,
mode=ia.ALL,
cval=(0, 255)),
iaa.PiecewiseAffine(scale=(0.1, 0.3)),
iaa.ElasticTransformation(alpha=(5, 100), sigma=(3, 5))
]
for aug in augs:
aug_det = aug.to_deterministic()
images_aug1 = aug_det.augment_images(images)
images_aug2 = aug_det.augment_images(images)
aug_det = aug.to_deterministic()
images_aug3 = aug_det.augment_images(images)
images_aug4 = aug_det.augment_images(images)
assert array_equal_lists(images_aug1, images_aug2), \
"Images (1, 2) expected to be identical for %s" % (aug.name,)
assert array_equal_lists(images_aug3, images_aug4), \
"Images (3, 4) expected to be identical for %s" % (aug.name,)
assert not array_equal_lists(images_aug1, images_aug3), \
"Images (1, 3) expected to be different for %s" % (aug.name,)
for aug in augs_affect_geometry:
aug_det = aug.to_deterministic()
kps_aug1 = aug_det.augment_keypoints(keypoints)
kps_aug2 = aug_det.augment_keypoints(keypoints)
aug_det = aug.to_deterministic()
kps_aug3 = aug_det.augment_keypoints(keypoints)
kps_aug4 = aug_det.augment_keypoints(keypoints)
assert keypoints_equal(kps_aug1, kps_aug2), \
"Keypoints (1, 2) expected to be identical for %s" % (aug.name,)
assert keypoints_equal(kps_aug3, kps_aug4), \
"Keypoints (3, 4) expected to be identical for %s" % (aug.name,)
assert not keypoints_equal(kps_aug1, kps_aug3), \
"Keypoints (1, 3) expected to be different for %s" % (aug.name,)
def test_unusual_channel_numbers():
reseed()
images = [(0, create_random_images((4, 16, 16))),
(1, create_random_images((4, 16, 16, 1))),
(2, create_random_images((4, 16, 16, 2))),
(4, create_random_images((4, 16, 16, 4))),
(5, create_random_images((4, 16, 16, 5))),
(10, create_random_images((4, 16, 16, 10))),
(20, create_random_images((4, 16, 16, 20)))]
augs = [
iaa.Add((-5, 5), name="Add"),
iaa.AddElementwise((-5, 5), name="AddElementwise"),
iaa.AdditiveGaussianNoise(0.01 * 255, name="AdditiveGaussianNoise"),
iaa.Multiply((0.95, 1.05), name="Multiply"),
iaa.Dropout(0.01, name="Dropout"),
iaa.CoarseDropout(0.01, size_px=6, name="CoarseDropout"),
iaa.Invert(0.01, per_channel=True, name="Invert"),
iaa.ContrastNormalization((0.95, 1.05), name="ContrastNormalization"),
iaa.GaussianBlur(sigma=(0.95, 1.05), name="GaussianBlur"),
iaa.AverageBlur((3, 5), name="AverageBlur"),
iaa.MedianBlur((3, 5), name="MedianBlur"),
# iaa.BilateralBlur((3, 5), name="BilateralBlur"), # works only with 3/RGB channels
# WithColorspace ?
# iaa.AddToHueAndSaturation((-5, 5), name="AddToHueAndSaturation"), # works only with 3/RGB channels
# ChangeColorspace ?
# iaa.Grayscale((0.0, 0.1), name="Grayscale"), # works only with 3 channels
# Convolve ?
iaa.Sharpen((0.0, 0.1), lightness=(1.0, 1.2), name="Sharpen"),
iaa.Emboss(alpha=(0.0, 0.1), strength=(0.5, 1.5), name="Emboss"),
iaa.EdgeDetect(alpha=(0.0, 0.1), name="EdgeDetect"),
iaa.DirectedEdgeDetect(alpha=(0.0, 0.1),
direction=0,
name="DirectedEdgeDetect"),
iaa.Fliplr(0.5, name="Fliplr"),
iaa.Flipud(0.5, name="Flipud"),
iaa.Affine(translate_px=(-5, 5), name="Affine-translate-px"),
iaa.Affine(translate_percent=(-0.05, 0.05),
name="Affine-translate-percent"),
iaa.Affine(rotate=(-20, 20), name="Affine-rotate"),
iaa.Affine(shear=(-20, 20), name="Affine-shear"),
iaa.Affine(scale=(0.9, 1.1), name="Affine-scale"),
iaa.PiecewiseAffine(scale=(0.001, 0.005), name="PiecewiseAffine"),
iaa.PerspectiveTransform(scale=(0.01, 0.10),
name="PerspectiveTransform"),
iaa.ElasticTransformation(alpha=(0.1, 0.2),
sigma=(0.1, 0.2),
name="ElasticTransformation"),
iaa.Sequential([iaa.Add((-5, 5)),
iaa.AddElementwise((-5, 5))]),
iaa.SomeOf(1, [iaa.Add(
(-5, 5)), iaa.AddElementwise((-5, 5))]),
iaa.OneOf([iaa.Add((-5, 5)),
iaa.AddElementwise((-5, 5))]),
iaa.Sometimes(0.5, iaa.Add((-5, 5)), name="Sometimes"),
# WithChannels
iaa.Noop(name="Noop"),
# Lambda
# AssertLambda
# AssertShape
iaa.Alpha((0.0, 0.1), iaa.Add(10), name="Alpha"),
iaa.AlphaElementwise((0.0, 0.1), iaa.Add(10), name="AlphaElementwise"),
iaa.SimplexNoiseAlpha(iaa.Add(10), name="SimplexNoiseAlpha"),
iaa.FrequencyNoiseAlpha(exponent=(-2, 2),
first=iaa.Add(10),
name="SimplexNoiseAlpha"),
iaa.Superpixels(p_replace=0.01, n_segments=64),
iaa.Resize({
"height": 4,
"width": 4
}, name="Resize"),
iaa.CropAndPad(px=(-10, 10), name="CropAndPad"),
iaa.Pad(px=(0, 10), name="Pad"),
iaa.Crop(px=(0, 10), name="Crop")
]
for aug in augs:
for (nb_channels, images_c) in images:
if aug.name != "Resize":
images_aug = aug.augment_images(images_c)
assert images_aug.shape == images_c.shape
image_aug = aug.augment_image(images_c[0])
assert image_aug.shape == images_c[0].shape
else:
images_aug = aug.augment_images(images_c)
image_aug = aug.augment_image(images_c[0])
if images_c.ndim == 3:
assert images_aug.shape == (4, 4, 4)
assert image_aug.shape == (4, 4)
else:
assert images_aug.shape == (4, 4, 4, images_c.shape[3])
assert image_aug.shape == (4, 4, images_c.shape[3])
def example_heavy_augmentations():
print("Example: Heavy Augmentations")
import imgaug as ia
from imgaug import augmenters as iaa
# random example images
images = np.random.randint(0, 255, (16, 128, 128, 3), dtype=np.uint8)
# Sometimes(0.5, ...) applies the given augmenter in 50% of all cases,
# e.g. Sometimes(0.5, GaussianBlur(0.3)) would blur roughly every second image.
st = lambda aug: iaa.Sometimes(0.5, aug)
# Define our sequence of augmentation steps that will be applied to every image
# All augmenters with per_channel=0.5 will sample one value _per image_
# in 50% of all cases. In all other cases they will sample new values
# _per channel_.
seq = iaa.Sequential(
[
iaa.Fliplr(0.5), # horizontally flip 50% of all images
iaa.Flipud(0.5), # vertically flip 50% of all images
st(iaa.Crop(
percent=(0,
0.1))), # crop images by 0-10% of their height/width
st(iaa.GaussianBlur(
(0, 3.0))), # blur images with a sigma between 0 and 3.0
st(
iaa.AdditiveGaussianNoise(
loc=0, scale=(0.0, 0.05 * 255),
per_channel=0.5)), # add gaussian noise to images
st(iaa.Dropout(
(0.0, 0.1),
per_channel=0.5)), # randomly remove up to 10% of the pixels
st(iaa.Add(
(-10, 10), per_channel=0.5
)), # change brightness of images (by -10 to 10 of original value)
st(iaa.Multiply((0.5, 1.5), per_channel=0.5)
), # change brightness of images (50-150% of original value)
st(iaa.ContrastNormalization(
(0.5, 2.0),
per_channel=0.5)), # improve or worsen the contrast
st(iaa.Grayscale((0.0, 1.0))), # blend with grayscale image
st(
iaa.Affine(
scale={
"x": (0.8, 1.2),
"y": (0.8, 1.2)
}, # scale images to 80-120% of their size, individually per axis
translate_px={
"x": (-16, 16),
"y": (-16, 16)
}, # translate by -16 to +16 pixels (per axis)
rotate=(-45, 45), # rotate by -45 to +45 degrees
shear=(-16, 16), # shear by -16 to +16 degrees
order=[
0,
1
], # use scikit-image's interpolation orders 0 (nearest neighbour) and 1 (bilinear)
cval=(
0, 1.0
), # if mode is constant, use a cval between 0 and 1.0
mode=ia.
ALL # use any of scikit-image's warping modes (see 2nd image from the top for examples)
)),
st(iaa.ElasticTransformation(alpha=(0.5, 3.5), sigma=0.25)
) # apply elastic transformations with random strengths
],
random_order=True # do all of the above in random order
)
images_aug = seq.augment_images(images)
# -----
# Make sure that the example really does something
assert not np.array_equal(images, images_aug)
def getSeq(self):
self.sometimes = lambda aug: iaa.Sometimes(0.5, aug)
self.seq = iaa.Sequential(
[
# apply the following augmenters to most images
# iaa.Fliplr(0.5), # horizontally flip 50% of all images
# iaa.Flipud(0.5), # vertically flip 20% of all images
iaa.SomeOf(
(0, 5),
[
#sometimes(iaa.Superpixels(p_replace=(0, 1.0), n_segments=(20, 200))), # convert images into their superpixel representation
iaa.OneOf([
iaa.GaussianBlur(
(0, 3.0)
), # blur images with a sigma between 0 and 3.0
iaa.AverageBlur(
k=(2, 7)
), # blur image using local means with kernel sizes between 2 and 7
iaa.MedianBlur(
k=(3, 11)
), # blur image using local medians with kernel sizes between 2 and 7
]),
#iaa.Sharpen(alpha=(0, 1.0), lightness=(0.75, 1.5)), # sharpen images
iaa.Emboss(alpha=(0, 1.0),
strength=(0, 2.0)), # emboss images
# search either for all edges or for directed edges,
# blend the result with the original image using a blobby mask
iaa.SimplexNoiseAlpha(
iaa.OneOf([
iaa.EdgeDetect(alpha=(0.5, 1.0)),
iaa.DirectedEdgeDetect(alpha=(0.5, 1.0),
direction=(0.0, 1.0)),
])),
iaa.AdditiveGaussianNoise(
loc=0, scale=(0.0, 0.05 * 255),
per_channel=0.5), # add gaussian noise to images
iaa.OneOf([
iaa.Dropout(
(0.01, 0.1), per_channel=0.5
), # randomly remove up to 10% of the pixels
iaa.CoarseDropout((0.03, 0.15),
size_percent=(0.02, 0.05),
per_channel=0.2),
]),
iaa.Invert(0.05,
per_channel=True), # invert color channels
iaa.Add(
(-10, 10), per_channel=0.5
), # change brightness of images (by -10 to 10 of original value)
iaa.AddToHueAndSaturation(
(-20, 20)), # change hue and saturation
# either change the brightness of the whole image (sometimes
# per channel) or change the brightness of subareas
iaa.OneOf([
iaa.Multiply((0.5, 1.5), per_channel=0.5),
iaa.FrequencyNoiseAlpha(
exponent=(-4, 0),
first=iaa.Multiply(
(0.5, 1.5), per_channel=True),
second=iaa.ContrastNormalization((0.5, 2.0)))
]),
iaa.ContrastNormalization(
(0.5, 2.0),
per_channel=0.5), # improve or worsen the contrast
iaa.Grayscale(alpha=(0.0, 1.0)),
],
random_order=True)
],
random_order=True)
def gen_batch_function(data_folder, image_shape, train=True):
"""
Generate function to create batches of training data
:param data_folder: Path to folder that contains all the datasets
:param image_shape: Tuple - Shape of image
:return:
"""
_train = train
seq = iaa.Sequential([
iaa.Fliplr(0.5), # horizontal flips
iaa.Crop(percent=(0, 0.1)), # random crops
# Small gaussian blur with random sigma between 0 and 0.5.
# But we only blur about 50% of all images.
# iaa.Sometimes(0.5,
# iaa.GaussianBlur(sigma=(0, 0.5))
# ),
# Strengthen or weaken the contrast in each image.
iaa.ContrastNormalization((0.75, 1.5)),
# Add gaussian noise.
# For 50% of all images, we sample the noise once per pixel.
# For the other 50% of all images, we sample the noise per pixel AND
# channel. This can change the color (not only brightness) of the
# pixels.
# iaa.AdditiveGaussianNoise(loc=0, scale=(0.0, 0.05*255), per_channel=0.5),
# Make some images brighter and some darker.
# In 20% of all cases, we sample the multiplier once per channel,
# which can end up changing the color of the images.
# iaa.Multiply((0.8, 1.2), per_channel=0.2),
# Apply affine transformations to each image.
# Scale/zoom them, translate/move them, rotate them and shear them.
iaa.Affine(
scale={"x": (0.8, 1.2), "y": (0.8, 1.2)},
translate_percent={"x": (-0.2, 0.2), "y": (-0.2, 0.2)},
rotate=(-15, 15)
# shear=(-8, 8)
)
], random_order=True) # apply augmenters in random order
def get_batches_fn(batch_size):
"""
Create batches of training data
:param batch_size: Batch Size
:return: Batches of training data
"""
image_paths = glob(os.path.join(data_folder, 'image_2', '*.png'))
label_paths = {
re.sub(r'_(lane|road)_', '_', os.path.basename(path)): path
for path in glob(os.path.join(data_folder, 'gt_image_2', '*_road_*.png'))}
background_color = np.array([255, 0, 0])
random.shuffle(image_paths)
for batch_i in range(0, len(image_paths), batch_size):
images = []
gt_images = []
for image_file in image_paths[batch_i:batch_i+batch_size]:
gt_image_file = label_paths[os.path.basename(image_file)]
image = scipy.misc.imresize(scipy.misc.imread(image_file), image_shape)
gt_image = scipy.misc.imresize(scipy.misc.imread(gt_image_file), image_shape)
if _train:
seq_det = seq.to_deterministic()
image = seq_det.augment_image(image)
gt_image = seq_det.augment_image(gt_image)
gt_bg = np.all(gt_image == background_color, axis=2)
gt_bg = gt_bg.reshape(*gt_bg.shape, 1)
gt_image = np.concatenate((gt_bg, np.invert(gt_bg)), axis=2)
images.append(image)
gt_images.append(gt_image)
yield np.array(images), np.array(gt_images)
return get_batches_fn
def train(config):
# Just in case if we need a on-the-fly augmentator
augmentator = iaa.SomeOf(
(0, None),
[
iaa.Add((-40, 40)),
iaa.Affine(scale=(0.7, 1.3),
rotate=iap.Choice([0, 90, 180, -90]),
mode='reflect'),
iaa.Fliplr(0.25), # horizontally flip 25% of the images
iaa.Flipud(0.25),
# Strengthen or weaken the contrast in each image.
iaa.ContrastNormalization((0.8, 1.2)),
iaa.GaussianBlur(
sigma=(0, 0.8)), # blur images with a sigma of 0 to 3.0
])
# set a default class mapping:
if not config['class_mapping']:
config['class_mapping'] = {k: k for k in config['classes']}
preprocess_input = getattr(models, config['model'] + '_preprocess_input')
train_images, train_labels = get_patches(config['training_folds'],
config['class_mapping'])
train_loader = ImageLoader(
images=train_images,
labels=train_labels,
augmentator=augmentator if config['augmentation'] else None,
balance=config['balance_training_data'],
preprocess_input=preprocess_input,
classes=config['classes'],
label_encoding='binary',
batch_size=config['batch_size'],
)
val_images, val_labels = get_patches(config['validation_folds'],
config['class_mapping'])
val_loader = ImageLoader(
images=val_images,
labels=val_labels,
preprocess_input=preprocess_input,
classes=config['classes'],
label_encoding='binary',
batch_size=config['batch_size'],
)
print('Training samples:', len(train_images))
print('Validation samples:', len(val_images))
os.makedirs(config['results_dir'], exist_ok=True)
# Load the model architecture:
print("Load model...")
model_loader = getattr(models, config['model'])
model = model_loader(**config['model_options'])
optimizer = getattr(optimizers,
config['optimizer'])(**config['optimizer_options'])
if len(config['classes']) == 2:
model.compile(loss='binary_crossentropy',
metrics=['binary_accuracy'],
optimizer=optimizer)
else:
model.compile(loss='categorical_crossentropy',
metrics=['categorical_accuracy'],
optimizer=optimizer)
print(model.summary())
model_dir = join(config['results_dir'], 'models', config['name'])
os.makedirs(model_dir, exist_ok=True)
with open(join(model_dir, 'config.yml'), 'w') as outfile:
yaml.dump(config, outfile, default_flow_style=False)
with open(join(model_dir, 'model.json'), 'w') as outfile:
json.dump(model.to_json(), outfile)
callback_list = [
callbacks.EarlyStopping(
monitor='val_loss',
patience=15,
),
callbacks.TensorBoard(
log_dir=join(config['results_dir'], 'tb_logs', config['name']),
histogram_freq=0,
write_graph=False,
write_images=False,
),
callbacks.ReduceLROnPlateau(monitor='val_loss',
factor=0.5,
patience=5,
verbose=1,
mode='auto',
min_delta=0.00002,
cooldown=0,
min_lr=0.00002),
callbacks.ModelCheckpoint(join(model_dir, 'checkpoint'),
monitor='val_loss',
verbose=0,
save_best_only=True,
save_weights_only=True,
mode='auto',
save_freq='epoch'),
AdvancedMetrics(logdir=join(config['results_dir'], 'tb_logs',
config['name']),
plotdir=join(config['results_dir'], 'plots',
config['name']),
data_generator=val_loader,
classes=config['classes'])
]
print("Train model...")
model.fit_generator(
train_loader,
steps_per_epoch=len(train_loader)
if config['training_steps'] is None else config['training_steps'],
validation_data=val_loader,
validation_steps=len(val_loader)
if config['validation_steps'] is None else config['validation_steps'],
epochs=config['training_epochs'],
use_multiprocessing=True,
workers=2,
callbacks=callback_list,
# class_weight=class_weights,
verbose=config['verbose'],
)
FILENAME_CSV_TRAIN = os.path.join(os.path.abspath('..'),
'datafiles', DATFILE_TYPE, TRAIN_TYPE + '_split_patid_train.csv')
FILENAME_CSV_VALID = os.path.join(os.path.abspath('..'),
'datafiles', DATFILE_TYPE, TRAIN_TYPE + '_split_patid_valid.csv')
FILENAME_CSV_TEST = os.path.join(os.path.abspath('..'),
'datafiles', DATFILE_TYPE, TRAIN_TYPE + '_split_patid_test.csv')
MODEL_SAVE_BASEDIR = os.path.join('/media/ubuntu/data1/tmp5/Plus_step_two_2020_3_14/', TRAIN_TYPE)
from imgaug import augmenters as iaa
sometimes = lambda aug: iaa.Sometimes(0.96, aug)
IMGAUG_TRAIN_SEQ = iaa.Sequential([
# iaa.CropAndPad(percent=(-0.04, 0.04)),
iaa.Fliplr(0.5), # horizontally flip 50% of the images
iaa.Flipud(0.2), # horizontally flip 50% of the images
sometimes(iaa.ContrastNormalization((0.9, 1.1))),
iaa.Sometimes(0.9, iaa.Add((-6, 6))),
sometimes(iaa.Affine(
scale=(0.98, 1.02),
translate_percent={"x": (-0.06, 0.06), "y": (-0.06, 0.06)},
rotate=(-15, 15), # rotate by -10 to +10 degrees
)),
])
'''
3212
0 2560
1 652
381
0 296
def __init__(self):
configMain.__init__(self)
st = lambda aug: iaa.Sometimes(0.4, aug)
oc = lambda aug: iaa.Sometimes(0.3, aug)
rl = lambda aug: iaa.Sometimes(0.09, aug)
self.augment = iaa.Sequential(
[
rl(iaa.GaussianBlur(
(0, 1.5))), # blur images with a sigma between 0 and 1.5
rl(
iaa.AdditiveGaussianNoise(
loc=0, scale=(0.0, 0.05),
per_channel=0.5)), # add gaussian noise to images
oc(iaa.Dropout((0.0, 0.10), per_channel=0.5)
), # randomly remove up to X% of the pixels
oc(
iaa.CoarseDropout(
(0.0, 0.10), size_percent=(0.08, 0.2), per_channel=0.5)
), # randomly remove up to X% of the pixels
oc(
iaa.Add((-40, 40), per_channel=0.5)
), # change brightness of images (by -X to Y of original value)
st(iaa.Multiply((0.10, 2.5), per_channel=0.2)
), # change brightness of images (X-Y% of original value)
rl(iaa.ContrastNormalization(
(0.5, 1.5),
per_channel=0.5)), # improve or worsen the contrast
rl(iaa.Grayscale((0.0, 1))), # put grayscale
],
random_order=True # do all of the above in random order
)
self.augment_labels = False
# there are files with data, 200 images each, and here we select which ones to use
#5self.dataset_name = 'Carla'
#with open(os.path.join(self.save_data_stats, 'path'),'r') as f:
# path = f.read().strip()
path = '../ElektraData4'
train_path = os.path.join(path, 'SeqTrain')
val_path = os.path.join(path, 'SeqVal')
print train_path, val_path
self.train_db_path = [
os.path.join(train_path, f)
for f in glob.glob1(train_path, "data_*.h5")
]
self.val_db_path = [
os.path.join(val_path, f)
for f in glob.glob1(val_path, "data_*.h5")
]
# When using data with noise, remove the recording during the first half of the noise impulse
# TODO Felipe: change to noise percentage.
self.remove_noise = False
# Speed Divide Factor
#TODO: FOr now is hardcooded, but eventually we should be able to calculate this from data at the loading time.
self.speed_factor = 1.0 # In KM/H FOR GTA it should be maximun 30.0
# The division is made by three diferent data kinds
# in every mini-batch there will be equal number of samples with labels from each group
# e.g. for [[0,1],[2]] there will be 50% samples with labels 0 and 1, and 50% samples with label 2
self.labels_per_division = [[2], [2], [2]]
self.dataset_names = ['targets']
self.queue_capacity = 20 * self.batch_size
# TODO NOT IMPLEMENTED Felipe: True/False switches to turn data balancing on or off
self.balances_val = True
self.balances_train = True
self.saturated_factor = True
def main():
augmenters = [
iaa.Identity(name="Identity"),
iaa.Crop(px=(0, 8), name="Crop-px"),
iaa.Crop(percent=(0, 0.1), name="Crop-percent"),
iaa.Fliplr(0.5, name="Fliplr"),
iaa.Flipud(0.5, name="Flipud"),
iaa.Grayscale((0.0, 1.0), name="Grayscale"),
iaa.GaussianBlur((0, 3.0), name="GaussianBlur"),
iaa.AdditiveGaussianNoise(loc=0,
scale=(0.0, 0.1),
name="AdditiveGaussianNoise"),
iaa.Dropout((0.0, 0.1), name="Dropout"),
iaa.Multiply((0.5, 1.5), name="Multiply"),
iaa.ContrastNormalization(alpha=(0.5, 2.0),
name="ContrastNormalization"),
iaa.Grayscale(alpha=(0.0, 1.0), name="Grayscale"),
iaa.ElasticTransformation(alpha=(0.5, 8.0),
sigma=1.0,
name="ElasticTransformation"),
iaa.Affine(scale={
"x": (0.8, 1.2),
"y": (0.8, 1.2)
},
translate_px={
"x": (-16, 16),
"y": (-16, 16)
},
rotate=(-45, 45),
shear=(-16, 16),
order=0,
cval=(0, 255),
mode="constant",
name="AffineOrder0ModeConstant")
]
for order in [0, 1]:
augmenters.append(
iaa.Affine(scale={
"x": (0.8, 1.2),
"y": (0.8, 1.2)
},
translate_px={
"x": (-16, 16),
"y": (-16, 16)
},
rotate=(-45, 45),
shear=(-16, 16),
order=order,
cval=(0, 255),
mode=ia.ALL,
name="AffineOrder%d" % (order, )))
augmenters.append(
iaa.Affine(scale={
"x": (0.8, 1.2),
"y": (0.8, 1.2)
},
translate_px={
"x": (-16, 16),
"y": (-16, 16)
},
rotate=(-45, 45),
shear=(-16, 16),
order=ia.ALL,
cval=(0, 255),
mode=ia.ALL,
name="AffineAll"))
kps = []
for _ in sm.xrange(20):
x = random.randint(0, 31)
y = random.randint(0, 31)
kps.append(ia.Keypoint(x=x, y=y))
kps = ia.KeypointsOnImage(kps, shape=(32, 32, 3))
small_keypoints_one = kps.on((4, 4, 3))
medium_keypoints_one = kps.on((32, 32, 3))
large_keypoints_one = kps.on((256, 256, 3))
small_keypoints = [small_keypoints_one.deepcopy() for _ in sm.xrange(16)]
medium_keypoints = [medium_keypoints_one.deepcopy() for _ in sm.xrange(16)]
large_keypoints = [large_keypoints_one.deepcopy() for _ in sm.xrange(16)]
small_images = np.random.randint(0, 255, (16, 4, 4, 3)).astype(np.uint8)
medium_images = np.random.randint(0, 255, (16, 32, 32, 3)).astype(np.uint8)
large_images = np.random.randint(0, 255,
(16, 256, 256, 3)).astype(np.uint8)
print("---------------------------")
print("Keypoints")
print("---------------------------")
for augmenter in augmenters:
print("[Augmenter: %s]" % (augmenter.name, ))
for keypoints in [small_keypoints, medium_keypoints, large_keypoints]:
times = []
for i in sm.xrange(100):
time_start = time.time()
_img_aug = augmenter.augment_keypoints(keypoints)
time_end = time.time()
times.append(time_end - time_start)
times = np.array(times)
img_str = "{:20s}".format(keypoints[0].shape)
print("%s | SUM %.5fs | PER ITER avg %.5fs, min %.5fs, max %.5fs" %
(img_str, float(np.sum(times)), np.average(times),
np.min(times), np.max(times)))
print("---------------------------")
print("Images")
print("---------------------------")
for augmenter in augmenters:
print("[Augmenter: %s]" % (augmenter.name, ))
for images in [small_images, medium_images, large_images]:
times = []
for i in sm.xrange(100):
time_start = time.time()
_img_aug = augmenter.augment_images(images)
time_end = time.time()
times.append(time_end - time_start)
times = np.array(times)
img_str = "{:20s}".format(images.shape)
print("%s | SUM %.5fs | PER ITER avg %.5fs, min %.5fs, max %.5fs" %
(img_str, float(np.sum(times)), np.average(times),
np.min(times), np.max(times)))
from data import (read_data, subtract_channel_mean, crop_image,
add_zero_paddings, make_annotation_one_hot_encoded,
TRAIN_SET, VALIDATION_SET)
from model import create_deeplab_model, download_resnet50_weights
from utils import get_confusion_matrix, segmentation_metrics
parser = argparse.ArgumentParser()
parser.add_argument('--storage-folder', '-s', required=True)
parser.add_argument('--image-size', '-i', type=int, default=513)
parser.add_argument('--batch-size', '-b', type=int, default=10)
parser.add_argument('--epochs', '-e', type=int, default=30)
image_augmentation = iaa.Sequential([
iaa.Add((-32, 32)), # change brightness
iaa.AddToHueAndSaturation((-20, 20)), # change hue and saturation
iaa.ContrastNormalization((0.5, 1.5)), # improve or worsen the contrast
])
affine = iaa.Affine(scale=(0.5, 2)) # zoom-in and zoom-out on image
flip = iaa.Fliplr(0.5) # left-right flip with 50% probability
def create_data_iterator(datapath,
crop_size,
batch_size,
use_augmentation=True):
images, annotations = read_data(datapath)
n_samples = len(images)
def iter_batches():
indices = np.arange(n_samples)
shuffle(indices) # randomize the order
def __call__(self, sample):
image, pose = sample['image'], sample['pose'].reshape([-1, 2])
sometimes = lambda aug: iaa.Sometimes(0.3, aug)
seq = iaa.Sequential(
[
# Apply the following augmenters to most images.
sometimes(
iaa.CropAndPad(percent=(-0.25, 0.25),
pad_mode=["edge"],
keep_size=False)),
sometimes(
iaa.Affine(scale={
"x": (0.75, 1.25),
"y": (0.75, 1.25)
},
translate_percent={
"x": (-0.25, 0.25),
"y": (-0.25, 0.25)
},
rotate=(-45, 45),
shear=(-5, 5),
order=[0, 1],
cval=(0, 255),
mode=ia.ALL)),
iaa.SomeOf(
(0, 3),
[
iaa.OneOf([
iaa.GaussianBlur((0, 3.0)),
# iaa.AverageBlur(k=(2, 7)),
iaa.MedianBlur(k=(3, 11)),
iaa.MotionBlur(k=5, angle=[-45, 45])
]),
iaa.OneOf([
iaa.AdditiveGaussianNoise(loc=0,
scale=(0.0, 0.05 * 255),
per_channel=0.5),
iaa.AdditivePoissonNoise(lam=(0, 8),
per_channel=True),
]),
iaa.OneOf([
iaa.Add((-10, 10), per_channel=0.5),
iaa.Multiply((0.2, 1.2), per_channel=0.5),
iaa.ContrastNormalization(
(0.5, 2.0), per_channel=0.5),
]),
],
# do all of the above augmentations in random order
random_order=True)
],
# do all of the above augmentations in random order
random_order=True)
# augmentation choices
seq_det = seq.to_deterministic()
image_aug = seq_det.augment_images([image])[0]
keypoints_aug = seq_det.augment_keypoints(
[self.pose2keypoints(image, pose)])[0]
return {'image': image_aug, 'pose': self.keypoints2pose(keypoints_aug)}
print(class_ids)
# Image Augmentation. Try finetuning some variables to custom values
# Image augmentation (light but constant)
augmentation = iaa.Sequential([
iaa.OneOf([ ## rotate
iaa.Affine(rotate=0),
iaa.Affine(rotate=90),
iaa.Affine(rotate=180),
iaa.Affine(rotate=270),
]),
iaa.Fliplr(0.5),
iaa.Flipud(0.5),
iaa.OneOf([ ## brightness or contrast
iaa.Multiply((0.9, 1.1)),
iaa.ContrastNormalization((0.9, 1.1)),
]),
iaa.OneOf([ ## blur or sharpen
iaa.GaussianBlur(sigma=(0.0, 0.1)),
iaa.Sharpen(alpha=(0.0, 0.1)),
]),
])
# test on the same image as above
imggrid = augmentation.draw_grid(image, cols=5, rows=2)
plt.figure(figsize=(30, 12))
_ = plt.imshow(imggrid.astype(int))
# =============================================================================
# # TRAIN
## Now it's time to train the model. Note that training even a basic model can take a few hours.
def train(model):
"""Train the model."""
# Training dataset.
dataset_train = WhaleDataset()
dataset_train.load_whale(args.dataset, "train")
dataset_train.prepare()
# Validation dataset
dataset_val = WhaleDataset()
dataset_val.load_whale(args.dataset, "val")
dataset_val.prepare()
# *** This training schedule is an example. Update to your needs ***
# Since we're using a very small dataset, and starting from
# COCO trained weights, we don't need to train too long. Also,
# no need to train all layers, just the heads should do it.
# first run
#layers_training='heads'
# second run
#layers_training='3+'
# third run
layers_training = 'all'
epochs_to_train = 250
# adding image augmentation parameters
augmentation = iaa.Sometimes(
.667,
iaa.Sequential(
[
iaa.Fliplr(0.5), # horizontal flips
iaa.Crop(percent=(0, 0.1)), # random crops
# Small gaussian blur with random sigma between 0 and 0.25.
# But we only blur about 50% of all images.
iaa.Sometimes(0.5, iaa.GaussianBlur(sigma=(0, 0.25))),
# Strengthen or weaken the contrast in each image.
iaa.ContrastNormalization((0.75, 1.5)),
# Add gaussian noise.
# For 50% of all images, we sample the noise once per pixel.
# For the other 50% of all images, we sample the noise per pixel AND
# channel. This can change the color (not only brightness) of the
# pixels.
iaa.AdditiveGaussianNoise(loc=0, scale=(0.0, 0.05 * 255)),
# Make some images brighter and some darker.
# In 20% of all cases, we sample the multiplier once per channel,
# which can end up changing the color of the images.
iaa.Multiply((0.8, 1.2)),
# Apply affine transformations to each image.
# Scale/zoom them, translate/move them, rotate them and shear them.
iaa.Affine(
scale={
"x": (0.8, 1.2),
"y": (0.8, 1.2)
},
#translate_percent={"x": (-0.2, 0.2), "y": (-0.2, 0.2)},
rotate=(-180, 180),
#shear=(-8, 8)
)
],
random_order=True)) # apply augmenters in random order
# old image aug parameters
"""
augmentation = iaa.Sometimes(0.9, [
iaa.Fliplr(0.5),
iaa.Flipud(0.5),
iaa.Multiply((0.8, 1.2)),
iaa.GaussianBlur(sigma=(0.0, 5.0))
])
"""
print("Training 5+ layerss with augmentation.")
print("*****Beginning training*****")
print("config.LEARNING_RATE", config.LEARNING_RATE)
print("layers_training:", layers_training)
print("epochs_to_train:", epochs_to_train)
print("augmentation: ", augmentation)
print("---")
print("Images: {}\nClasses: {}".format(len(dataset_train.image_ids),
dataset_train.class_names))
#print("Training network in its entirety with augmentation")
model.train(dataset_train,
dataset_val,
learning_rate=config.LEARNING_RATE,
epochs=epochs_to_train,
layers=layers_training,
augmentation=augmentation)
import numpy as np
import cv2
import os
from imgaug import augmenters as iaa
from boundingDetect import fit_contours
(winW, winH) = (5, 10)
folder = '/home/tailongnguyen/aeh16/text'
if not os.path.isdir(folder):
os.mkdir(folder)
labels = list('0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz')
contrast2 = iaa.ContrastNormalization((0.65, 0.85), per_channel=0.5)
add = iaa.Add(-40, per_channel=0.5)
noise = iaa.AdditiveGaussianNoise(loc=0, scale=(0.0, 0.08*255), per_channel=0.4)
def get_fols(di):
l = os.listdir(di)
l.sort()
l = [di + "/" + x for x in l]
return l
# stop = 0
contrast = iaa.ContrastNormalization((0.5, 2.0), per_channel=0.5)
for i, fol in enumerate(get_fols(folder)):
print "Processing " + fol
image_files = os.listdir(fol)
# stop += 1
for j, image in enumerate(image_files):
image_file = os.path.join(fol, image)
im = cv2.imread(image_file)
def get_augs():
iaa_Blur = iaa.OneOf([
iaa.GaussianBlur((0, 1.5)), # blur images with a sigma between 0 and 1.5
iaa.AverageBlur(k=(2, 4)), # blur image using local means with kernel sizes between 2 and 7
iaa.MedianBlur(k=(3, 5)), # blur image using local medians with kernel sizes between 3 and 5
])
iaa_Sharpen = iaa.OneOf([
iaa.Sharpen(alpha=(0, 0.5), lightness=(0.75, 1.5)), # sharpen images
iaa.Emboss(alpha=(0, 0.5), strength=(0, 0.5)), # emboss images
])
iaa_Noise = iaa.OneOf([
iaa.AdditiveGaussianNoise(loc=0, scale=(0.0, 0.03*255), per_channel=0.1), # add gaussian noise to images
iaa.Dropout((0, 0.02), per_channel=0.1), # randomly remove up to 10% of the pixels
#iaa.CoarseDropout((0.03, 0.15), size_percent=(0.02, 0.05), per_channel=0.2),
])
iaa_Affine = iaa.OneOf([
iaa.Affine(
scale={"x": (0.8, 1.2), "y": (0.8, 1.2)}, # scale images to 80-120% of their size, individually per axis
translate_percent={"x": (-0.2, 0.2), "y": (-0.2, 0.2)}, # translate by -20 to +20 percent (per axis)
rotate=(-45, 45), # rotate by -45 to +45 degrees
shear=(-16, 16), # shear by -16 to +16 degrees
order=[0, 1], # use nearest neighbour or bilinear interpolation (fast)
cval=(0, 255), # if mode is constant, use a cval between 0 and 255
mode='edge' # use zeros for padding
),
iaa.PiecewiseAffine(scale=(0.01, 0.05)), # move parts of the image around # is it fast?
iaa.PerspectiveTransform(scale=(0.01, 0.1)) # is it fast?
#iaa.ElasticTransformation(alpha=(0.5, 3.5), sigma=0.25), # move pixels locally around (with random strengths) # we need borders
])
iaa_HSV = iaa.OneOf([
iaa.Grayscale(alpha=(0.0, 0.5)),
iaa.Add((-10, 10), per_channel=0.01), # change brightness of images (by -10 to 10 of original value)
iaa.AddToHueAndSaturation((-20, 20)), # change hue and saturation
iaa.Sequential([
iaa.ChangeColorspace(from_colorspace="RGB", to_colorspace="HSV"),
iaa.WithChannels(0, iaa.Add((-100, 100))),
iaa.ChangeColorspace(from_colorspace="HSV", to_colorspace="RGB")
]),
iaa.ContrastNormalization((0.7, 1.6), per_channel=0), # improve or worsen the contrast
iaa.Multiply((0.7, 1.2), per_channel=0.01),
iaa.FrequencyNoiseAlpha(
exponent=(-2, 2),
first=iaa.Multiply((0.85, 1.2), per_channel=False),
second=iaa.ContrastNormalization((0.5, 1.7))),
])
iaa_Simple = iaa.OneOf([
iaa.Fliplr(0.5), # horizontally flip 50% of all images
iaa.Flipud(0.5), # vertically flip 20% of all images
iaa.CropAndPad(
percent=(-0.05, 0.1),
pad_mode='edge',
pad_cval=(0, 255)
),
])
augs = {
'simple': iaa_Simple,
'affine': iaa_Affine,
'hsv': iaa_HSV,
'sharpen': iaa_Sharpen,
'blur': iaa_Blur,
'noise': iaa_Noise,
}
return augs
import imgaug as ia
from imgaug import augmenters as iaa
source = "darkflow/Dataset"
output_dir = "darkflow/Data"
classes = ['small-car', 'big-car', 'bus', 'truck', 'three-wheeler', 'two-wheeler', 'lcv', 'bicycle', 'people']
seq = iaa.Sequential([
iaa.Fliplr(0.5), # horizontal flips
iaa.Crop(percent=(0, 0.1)), # random crops
# Small gaussian blur with random sigma between 0 and 0.5.
# But we only blur about 50% of all images.
iaa.Sometimes(0.5,
iaa.GaussianBlur(sigma=(0, 0.5))
),
# Strengthen or weaken the contrast in each image.
iaa.ContrastNormalization((0.75, 1.5)),
# Add gaussian noise.
# For 50% of all images, we sample the noise once per pixel.
# For the other 50% of all images, we sample the noise per pixel AND
# channel. This can change the color (not only brightness) of the
# pixels.
iaa.AdditiveGaussianNoise(loc=0, scale=(0.0, 0.05 * 255), per_channel=0.5),
# Make some images brighter and some darker.
# In 20% of all cases, we sample the multiplier once per channel,
# which can end up changing the color of the images.
iaa.Multiply((0.8, 1.2), per_channel=0.2),
], random_order=True)
dir_skip = 3
image_skip = 352
flag = True
for dir_count, dir in enumerate(os.listdir(source)):
def augmentation_generator(data, batch_size):
'''
Performs data augmentation on training set. Practice data gen.
'''
n = len(data)
batches_to_make = n // batch_size
# Containers for batch data and labels.
batch_data = np.zeros((batch_size, 224, 224, 3), dtype=np.float32)
batch_labels = np.zeros((batch_size, 2), dtype=np.float32)
# Grab indices.
indices = np.arange(n)
# Define transformations.
transformations = iaa.OneOf([
iaa.Fliplr(0.5), # Flip.
iaa.ContrastNormalization((0.75, 1.5)), # Play around with contrast.
iaa.GaussianBlur(sigma=(0, 0.5)), # Randomly blur.
iaa.Multiply((0.8, 1.2)) # Change brightness.
])
# Start a counter.
batches_made = 0
while True:
# Make batch.
np.random.shuffle(indices)
count = 0
next_batch = indices[(batches_made * batch_size):(batches_made + 1) *
batch_size]
for foo, idx in enumerate(next_batch):
img_name = data.iloc[idx]['image_path']
img_label = data.iloc[idx]['label']
# Encode label.
encoded_label = to_categorical(img_label, num_classes=2)
# Read image and resize.
img = cv2.imread(str(img_name))
img = cv2.resize(img, (224, 224))
# Check for greyscale.
if img.shape[2] == 1:
img = np.dstack([img, img, img])
# Change from BGR to RGB and normalize.
orig_img = cv2.cvtColor(img, cv2.COLOR_BGR2RGB)
orig_img = orig_img.astype(np.float32) / 255
batch_data[count] = orig_img
batch_labels[count] = encoded_label
# Data augment for under-sampled class.
if img_label == 0 and count < batch_size - 2:
# Image 1.
aug_img1 = transformations.augment(images=img)
aug_img1 = cv2.cvtColor(aug_img1, cv2.COLOR_BGR2RGB)
aug_img1 = aug_img1.astype(np.float32) / 255
batch_data[count + 1] = aug_img1
batch_labels[count + 1] = encoded_label
# Image 2.
aug_img2 = transformations.augment(images=img)
aug_img2 = cv2.cvtColor(aug_img2, cv2.COLOR_BGR2RGB)
aug_img2 = aug_img2.astype(np.float32) / 255
batch_data[count + 2] = aug_img2
batch_labels[count + 2] = encoded_label
else:
count += 1
# Can't add anymore.
if count == batch_size - 1:
break
batches_made += 1
yield batch_data, batch_labels
# Reset for the next go.
if batches_made >= batches_to_make:
batches_made = 0
def test_keypoint_augmentation():
reseed()
keypoints = []
for y in range(40 // 5):
for x in range(60 // 5):
keypoints.append(ia.Keypoint(y=y * 5, x=x * 5))
keypoints_oi = ia.KeypointsOnImage(keypoints, shape=(40, 60, 3))
keypoints_oi_empty = ia.KeypointsOnImage([], shape=(40, 60, 3))
augs = [
iaa.Add((-5, 5), name="Add"),
iaa.AddElementwise((-5, 5), name="AddElementwise"),
iaa.AdditiveGaussianNoise(0.01 * 255, name="AdditiveGaussianNoise"),
iaa.Multiply((0.95, 1.05), name="Multiply"),
iaa.Dropout(0.01, name="Dropout"),
iaa.CoarseDropout(0.01, size_px=6, name="CoarseDropout"),
iaa.Invert(0.01, per_channel=True, name="Invert"),
iaa.ContrastNormalization((0.95, 1.05), name="ContrastNormalization"),
iaa.GaussianBlur(sigma=(0.95, 1.05), name="GaussianBlur"),
iaa.AverageBlur((3, 5), name="AverageBlur"),
iaa.MedianBlur((3, 5), name="MedianBlur"),
# iaa.BilateralBlur((3, 5), name="BilateralBlur"),
# WithColorspace ?
# iaa.AddToHueAndSaturation((-5, 5), name="AddToHueAndSaturation"),
# ChangeColorspace ?
# Grayscale cannot be tested, input not RGB
# Convolve ?
iaa.Sharpen((0.0, 0.1), lightness=(1.0, 1.2), name="Sharpen"),
iaa.Emboss(alpha=(0.0, 0.1), strength=(0.5, 1.5), name="Emboss"),
iaa.EdgeDetect(alpha=(0.0, 0.1), name="EdgeDetect"),
iaa.DirectedEdgeDetect(alpha=(0.0, 0.1),
direction=0,
name="DirectedEdgeDetect"),
iaa.Fliplr(0.5, name="Fliplr"),
iaa.Flipud(0.5, name="Flipud"),
iaa.Affine(translate_px=(-5, 5), name="Affine-translate-px"),
iaa.Affine(translate_percent=(-0.05, 0.05),
name="Affine-translate-percent"),
iaa.Affine(rotate=(-20, 20), name="Affine-rotate"),
iaa.Affine(shear=(-20, 20), name="Affine-shear"),
iaa.Affine(scale=(0.9, 1.1), name="Affine-scale"),
iaa.PiecewiseAffine(scale=(0.001, 0.005), name="PiecewiseAffine"),
# iaa.PerspectiveTransform(scale=(0.01, 0.10), name="PerspectiveTransform"),
iaa.ElasticTransformation(alpha=(0.1, 0.2),
sigma=(0.1, 0.2),
name="ElasticTransformation"),
# Sequential
# SomeOf
# OneOf
# Sometimes
# WithChannels
# Noop
# Lambda
# AssertLambda
# AssertShape
iaa.Alpha((0.0, 0.1), iaa.Add(10), name="Alpha"),
iaa.AlphaElementwise((0.0, 0.1), iaa.Add(10), name="AlphaElementwise"),
iaa.SimplexNoiseAlpha(iaa.Add(10), name="SimplexNoiseAlpha"),
iaa.FrequencyNoiseAlpha(exponent=(-2, 2),
first=iaa.Add(10),
name="SimplexNoiseAlpha"),
iaa.Superpixels(p_replace=0.01, n_segments=64),
iaa.Scale(0.5, name="Scale"),
iaa.CropAndPad(px=(-10, 10), name="CropAndPad"),
iaa.Pad(px=(0, 10), name="Pad"),
iaa.Crop(px=(0, 10), name="Crop")
]
for aug in augs:
dss = []
for i in range(10):
aug_det = aug.to_deterministic()
kp_fully_empty_aug = aug_det.augment_keypoints([])
assert kp_fully_empty_aug == []
kp_first_empty_aug = aug_det.augment_keypoints(
[keypoints_oi_empty])[0]
assert len(kp_first_empty_aug.keypoints) == 0
kp_image = keypoints_oi.to_keypoint_image(size=5)
kp_image_aug = aug_det.augment_image(kp_image)
kp_image_aug_rev = ia.KeypointsOnImage.from_keypoint_image(
kp_image_aug,
if_not_found_coords={
"x": -9999,
"y": -9999
},
nb_channels=1)
kp_aug = aug_det.augment_keypoints([keypoints_oi])[0]
ds = []
assert len(kp_image_aug_rev.keypoints) == len(kp_aug.keypoints),\
"Lost keypoints for '%s' (%d vs expected %d)" \
% (aug.name, len(kp_aug.keypoints), len(kp_image_aug_rev.keypoints))
for kp_pred, kp_pred_img in zip(kp_aug.keypoints,
kp_image_aug_rev.keypoints):
kp_pred_lost = (kp_pred.x == -9999 and kp_pred.y == -9999)
kp_pred_img_lost = (kp_pred_img.x == -9999
and kp_pred_img.y == -9999)
if not kp_pred_lost and not kp_pred_img_lost:
d = np.sqrt((kp_pred.x - kp_pred_img.x)**2 +
(kp_pred.y - kp_pred_img.y)**2)
ds.append(d)
dss.extend(ds)
if len(ds) == 0:
print("[INFO] No valid keypoints found for '%s' "
"in test_keypoint_augmentation()" % (str(aug), ))
assert np.average(dss) < 5.0, \
"Average distance too high (%.2f, with ds: %s)" \
% (np.average(dss), str(dss))
def __init__(self, image_root, txt_path, is_train, transform=None):
super(Single_Dataset, self).__init__()
self.image_root = image_root
self.txt_path = txt_path
self.is_train = is_train
self.transform = transform
self.image_list = []
self.label_list = []
lines = open(self.txt_path, 'r').readlines()
lines = [line.strip() for line in lines]
for line in lines:
self.image_list.append(line.split(' ')[0])
self.label_list.append(int(line.split(' ')[1]))
self.seq = iaa.SomeOf(
(3, 11),
{
# self.seq = iaa.SomeOf((0, 5), {
# iaa.Fliplr(0.5),
iaa.Flipud(0.5),
# iaa.Crop(percent=(0, 0.1)),
# Small gaussian blur with random sigma between 0 and 0.5.
# But we only blur about 50% of all images.
iaa.Sometimes(0.5, iaa.GaussianBlur(sigma=(0, 0.5))),
# Strengthen or weaken the contrast in each image.
iaa.ContrastNormalization((0.75, 1.5)),
# 先将图片从RGB变换到HSV,然后将H值增加10,然后再变换回RGB
iaa.WithColorspace(to_colorspace="HSV",
from_colorspace="RGB",
children=iaa.WithChannels(
2, iaa.Add((10, 50)))),
iaa.AverageBlur(k=((2, 5), (1, 3))),
iaa.SimplexNoiseAlpha(first=iaa.EdgeDetect((0.0, 0.2)),
second=iaa.ContrastNormalization(
(0.5, 2.0)),
per_channel=True),
# Add gaussian noise.
# For 50% of all images, we sample the noise once per pixel.
# For the other 50% of all images, we sample the noise per pixel AND
# channel. This can change the color (not only brightness) of the
# pixels.
iaa.ImpulseNoise(p=0.02),
iaa.AdditiveGaussianNoise(
loc=0, scale=(0.0, 0.02 * 255), per_channel=0.5),
# Make some images brighter and some darker.
# In 20% of all cases, we sample the multiplier once per channel,
# which can end up changing the color of the images.
iaa.Multiply((0.8, 1.2), per_channel=0.2),
iaa.PerspectiveTransform(scale=0.06),
# # 图像扭曲
# iaa.PiecewiseAffine(scale=(0.01, 0.05)),
# Apply affine transformations to each image.
# Scale/zoom them, translate/move them, rotate them and shear them.
iaa.Affine(scale={
"x": (0.8, 1.2),
"y": (0.8, 1.2)
},
translate_percent={
"x": (-0.2, 0.2),
"y": (-0.2, 0.2)
},
rotate=(-45, 45),
shear=(-8, 8))
},
random_order=True)