def on_pre_enter(self):
try:
self.is_active = True
self.configuration_api = self.api.get_configuration_api()
dripper_type = self.configuration_api.get_dripper_type()
self.ids.dripper_type_selector.selected = dripper_type
self.dripper_type_changed(None, dripper_type)
self.emulated_settings.drips_per_mm = self.configuration_api.get_dripper_drips_per_mm(
)
self.emulated_settings.drips_per_second = self.configuration_api.get_dripper_emulated_drips_per_second(
)
self.circut_settings.drips_per_mm = self.configuration_api.get_dripper_drips_per_mm(
)
self.circut_visuals.target_height = str(
self.circut_setup.test_height)
self.photo_settings.photo_zaxis_delay = self.configuration_api.get_dripper_photo_zaxis_delay(
)
except:
raise
ep = ErrorPopup(title=_("Error"),
text=_("No Peachy Printer Detected"))
ep.open()
App.get_running_app().root.current = 'main_ui'
def on_pre_enter(self):
try:
self.configuration_api = self.api.get_configuration_api()
except Exception as ex:
import traceback
traceback.print_exc()
ep = ErrorPopup(title_source=_("Error"), text=_("No Peachy Printer Detected"), details="%s\n%s" % (type(ex), ex))
ep.open()
App.get_running_app().root.current = 'main_ui'
def on_pre_enter(self):
try:
self.configuration_api = self.api.get_configuration_api()
except Exception as ex:
import traceback
traceback.print_exc()
ep = ErrorPopup(title_source=_("Error"),
text=_("No Peachy Printer Detected"),
details="%s\n%s" % (type(ex), ex))
ep.open()
App.get_running_app().root.current = 'main_ui'
def turn_on(self):
self.is_active = True
try:
self.calibration_api = self.api.get_calibration_api()
self.calibration_api.show_point([0.5, 0.5, 0.0])
except Exception as ex:
import traceback
traceback.print_exc()
ep = ErrorPopup(title_source=_("Error"), text=_("No Peachy Printer Detected"), details="%s\n%s" % (type(ex), ex))
ep.open()
App.get_running_app().root.current = 'mainui'
self._switch_to_default_panel()
def ready_check(self, args):
self.label.text_source = _(
"Checking for readiness, do not shutdown or restart your computer or disconnect."
)
if self.firmware_api.is_ready():
Logger.info("Printer is ready")
self.label.text_source = _(
"Updating, do not shutdown or restart your computer or disconnect."
)
self.firmware_api.update_firmware(self.complete_call_back)
else:
Logger.info("Printer is not ready, checking again.")
Clock.schedule_once(self.ready_check, self.check_rate)
def __init__(self, text=None, details=None, title_source=None, **kwargs):
if text is None:
self.text = _("Bad Stuff Happened")
else:
self.text = text
if title_source is None:
self.title_source = _("No Title")
else:
self.title_source = title_source
if details is None:
self.details = ""
else:
self.details = details
super(ErrorPopup, self).__init__(**kwargs)
def __init__(self, text=None, details=None, title_source=None, **kwargs):
if text is None:
self.text = _('Bad Stuff Happened')
else:
self.text = text
if title_source is None:
self.title_source = _("No Title")
else:
self.title_source = title_source
if details is None:
self.details = ""
else:
self.details = details
super(ErrorPopup, self).__init__(**kwargs)
def _complete_fail(self, *args):
self.image.anim_delay = -1
self.label.text_source = _(
"Firmware update failed, please disconnect the printer restart the software and try again."
)
self._complete_button.on_release = self.exit
self.window.add_widget(self._complete_button)
def turn_on(self):
self.is_active = True
try:
self.calibration_api = self.api.get_calibration_api()
self.calibration_api.subscribe_to_status(
self.status_bar.update_message)
self.calibration_api.show_point([0.5, 0.5, 0.0])
except Exception as ex:
import traceback
traceback.print_exc()
ep = ErrorPopup(title_source=_("Error"),
text=_("No Peachy Printer Detected"),
details="%s\n%s" % (type(ex), ex))
ep.open()
App.get_running_app().root.current = 'main_ui'
self._switch_to_default_panel()
def switch_lang(self, lang):
Logger.info("Using Language Locale: %s" % self.lang)
locale_dir = join(dirname(__file__), 'resources', 'il8n', 'locales')
locales = gettext.translation('peachyprinter', locale_dir, languages=[self.lang])
self.translator = locales.ugettext
if hasattr(self, 'settings'):
self.settings.interface.menu.close_button.text = self.translation(_("Close"))
def _complete_success(self, *args):
self.label.text_source = _(
"Firmware update successful. Please disconnect and reconnect your printer."
)
self.image.source = 'resources/images/firmware_out_in_512x512.zip'
self.image.anim_delay = 1.0 / 15.0
Clock.schedule_once(self._check_for_peachy, 0.5)
def connect_to_printer(self):
try:
self.setting_translation.load_config(self.config)
self.config.add_callback(self.setting_translation.update_setting)
self.api.get_configuration_api().get_current_config()
return True
except MissingPrinterException:
return False
except Exception as ex:
fail_box = BoxLayout(orientation="vertical")
pop_message = I18NLabel(text_source=_("An Error has Occured"), size_hint_y=None, height=self.label_height,)
pop_error = I18NLabel(text_source=str(ex))
pop_exit = I18NButton(text_source=_("Exit"), size_hint_y=None, height=self.button_height, on_release=self.exit_app)
fail_box.add_widget(pop_message)
fail_box.add_widget(pop_error)
fail_box.add_widget(pop_exit)
return fail_box
def _update_status(self, arg):
data = self.print_api.get_status()
if 'status' in data:
self.status = data['status']
if 'model_height' in data:
self.model_height = data['model_height']
if 'start_time' in data:
self.start_time = data['start_time']
if 'drips' in data:
self.drips = data['drips']
self.ids.printer_animation.drips = data['drips']
if 'height' in data:
self.print_height = data['height']
if 'drips_per_second' in data:
self.drips_per_second = data['drips_per_second']
if 'errors' in data:
self.errors = data['errors']
if 'waiting_for_drips' in data:
self.ids.printer_animation.waiting_for_drips = data['waiting_for_drips']
self.waiting_for_drips = str(data['waiting_for_drips'])
if 'elapsed_time' in data:
self.elapsed_time = self.time_delta_format(data['elapsed_time'])
if 'current_layer' in data:
self.current_layer = data['current_layer']
if 'skipped_layers' in data:
self.skipped_layers = data['skipped_layers']
if 'drip_history' in data:
self.ids.printer_animation.drip_history = data['drip_history']
if 'axis' in data:
self.ids.printer_animation.axis_history = data['axis']
Clock.unschedule(self._update_status)
if self.status == 'Complete':
self.ids.printer_animation.animation_stop()
self.play_complete_sound()
if (App.get_running_app().last_print.print_type is "file" and len(self._filenames) > 0):
self._wait_and_print_next()
else:
self.ids.navigate_button.text_source = _("Print Complete")
elif self.status == 'Failed':
self.ids.printer_animation.animation_stop()
self.play_failed_sound()
self.ids.navigate_button.text_source = _("Print Failed")
else:
Clock.schedule_once(self._update_status, self.refresh_rate)
def on_pre_enter(self):
try:
self.is_active = True
self.configuration_api = self.api.get_configuration_api()
dripper_type = self.configuration_api.get_dripper_type()
self.ids.dripper_type_selector.selected = dripper_type
self.dripper_type_changed(None, dripper_type)
self.emulated_settings.drips_per_mm = self.configuration_api.get_dripper_drips_per_mm()
self.circut_settings.drips_per_mm = self.configuration_api.get_dripper_drips_per_mm()
self.circut_visuals.target_height = str(self.circut_setup.test_height)
self.photo_settings.photo_zaxis_delay = self.configuration_api.get_dripper_photo_zaxis_delay()
except:
raise
ep = ErrorPopup(title=_("Error"), text=_("No Peachy Printer Detected"))
ep.open()
App.get_running_app().root.current = 'mainui'
def _get_display_version(self, reported_version):
if self.firmware_api.is_ready():
return _('Bootloader')
elif reported_version == '':
return self._bootloader_required()
elif self._get_revision_from_verison(reported_version) < 238:
return self._bootloader_required()
else:
return reported_version
def __init__(self, api, **kwargs):
super(FirmwareUpdateUI, self).__init__(**kwargs)
self.api = api
self.check_rate = 1.0 / 4.0
app = App.get_running_app()
self._complete_button = I18NButton(text_source=_("Continue"),
on_release=self.close,
size_hint_y=None,
height=app.button_height)
def print_files(self, filenames, start_height):
try:
start_height = float(start_height)
except:
start_height = 0.0
self.print_options = [self._print_files, filenames, {'start_height': start_height}]
popup = LaserWarningPopup(title=_('Laser Safety Notice'), size_hint=(0.6, 0.6))
popup.bind(on_dismiss=self.is_safe)
popup.open()
def show_disclaimer(self, *args):
accepted_disclaimer = Config.getdefault('internal', 'disclaimer', False)
if not accepted_disclaimer:
self._disclaimer = I18NPopup(
title_source=_("Disclaimer"),
content=Disclaimer(self.accept_disclaimer, self.reject_disclaimer, ),
size_hint=(0.9, 0.9),
auto_dismiss=False)
self._disclaimer.open()
def show_load(self):
self.last_directory = Config.getdefault('internal', 'last_directory',
self.last_directory)
content = LoadDialog(load=self.load,
cancel=self.dismiss_popup,
last_directory=self.last_directory)
self._popup = I18NPopup(title_source=_("Load file"),
content=content,
size_hint=(0.9, 0.9))
self._popup.open()
def switch_lang(self, lang):
Logger.info("Using Language Locale: %s" % self.lang)
locale_dir = join(dirname(__file__), 'resources', 'il8n', 'locales')
locales = gettext.translation('peachyprinter',
locale_dir,
languages=[self.lang])
self.translator = locales.ugettext
if hasattr(self, 'settings'):
self.settings.interface.menu.close_button.text = self.translation(
_("Close"))
def __init__(self, **kwargs):
super(TestPatternPanel, self).__init__(**kwargs)
self.loaded = False
self.friendly_names = {
"Square": _("Square"),
"Twitch": _("Twitch"),
"Damping Test": _("Damping"),
"Memory Hourglass": _("Hourglass"),
"NESW": _("NESW"),
"Circle": _("Circle"),
"Hilbert Space Filling Curve": _("Hilbert"),
"Spiral": _("Spiral"),
}
def show_disclaimer(self, *args):
accepted_disclaimer = Config.getdefault('internal', 'disclaimer',
False)
if not accepted_disclaimer:
self._disclaimer = I18NPopup(title_source=_("Disclaimer"),
content=Disclaimer(
self.accept_disclaimer,
self.reject_disclaimer,
),
size_hint=(0.9, 0.9),
auto_dismiss=False)
self._disclaimer.open()
def __init__(self, **kwargs):
super(TestPatternPanel, self).__init__(**kwargs)
self.loaded = False
self.friendly_names = {
"Square": _("Square"),
"Twitch": _("Twitch"),
"Damping Test": _("Damping"),
"Memory Hourglass": _("Hourglass"),
"NESW": _("NESW"),
"Circle": _("Circle"),
"Hilbert Space Filling Curve": _("Hilbert"),
"Spiral": _("Spiral"),
}
def build(self):
self.icon = os.path.join(os.path.dirname(__file__), 'resources', 'peachy.png')
self.settings_cls = SettingsWithSidebar
try:
self.setting_translation.load_config(self.config)
self.config.add_callback(self.setting_translation.update_setting)
except MissingPrinterException:
fail_box = BoxLayout(orientation="vertical")
pop_message = I18NLabel(text_source=_("Please connect your peachy printer before starting the software"))
pop_exit = I18NButton(text_source=_("Exit"), size_hint_y=None, height=30, on_release=self.exit_app)
fail_box.add_widget(pop_message)
fail_box.add_widget(pop_exit)
return fail_box
except Exception as ex:
fail_box = BoxLayout(orientation="vertical")
pop_message = I18NLabel(text_source=_("An Error has Occured"), size_hint_y=None, height=self.label_height,)
pop_error = I18NLabel(text_source=str(ex))
pop_exit = I18NButton(text_source=_("Exit"), size_hint_y=None, height=self.button_height, on_release=self.exit_app)
fail_box.add_widget(pop_message)
fail_box.add_widget(pop_error)
fail_box.add_widget(pop_exit)
return fail_box
self.manager = MyScreenManager(self.api, self.setting_translation)
return self.manager
def connect_to_printer(self):
try:
self.setting_translation.load_config(self.config)
self.config.add_callback(self.setting_translation.update_setting)
self.api.get_configuration_api().get_current_config()
return True
except MissingPrinterException:
return False
except Exception as ex:
fail_box = BoxLayout(orientation="vertical")
pop_message = I18NLabel(
text_source=_("An Error has Occured"),
size_hint_y=None,
height=self.label_height,
)
pop_error = I18NLabel(text_source=str(ex))
pop_exit = I18NButton(text_source=_("Exit"),
size_hint_y=None,
height=self.button_height,
on_release=self.exit_app)
fail_box.add_widget(pop_message)
fail_box.add_widget(pop_error)
fail_box.add_widget(pop_exit)
return fail_box
def restart(self):
Clock.unschedule(self._update_status)
self.ids.printer_animation.animation_stop()
if self.dripper_setting:
self.ids.dripper_grid.remove_widget(self.dripper_setting)
self.dripper_setting = None
if self.print_api:
self.print_api.close()
self.print_api = None
self.ids.navigate_button.text_source = _('Cancel Print')
self.ids.navigate_button.background_color = [2.0, 0.0, 0.0, 1.0]
last_print = App.get_running_app().last_print
if last_print.print_type is "file":
self.print_file(last_print.source, self.return_to)
elif last_print.print_type is "test_print":
generator = self.api.get_test_print_api().get_test_print(*last_print.source)
self.print_generator(generator, self.return_to)
else:
raise("Unsupported Print Type %s" % last_print.print_type)
def restart(self):
Clock.unschedule(self._update_status)
self.ids.printer_animation.animation_stop()
if self.dripper_setting:
self.ids.dripper_grid.remove_widget(self.dripper_setting)
self.dripper_setting = None
if self.print_api:
self.print_api.close()
self.print_api = None
self.ids.navigate_button.text_source = _('Cancel Print')
last_print = App.get_running_app().last_print
if last_print.print_type is "file":
self.print_files(last_print.source, self.return_to)
elif last_print.print_type is "test_print":
generator = self.api.get_test_print_api().get_test_print(*last_print.source)
self.print_generator(generator, self.return_to)
elif last_print.print_type is "cure_test_print":
generator = self.api.get_configuration_api().get_cure_test(*last_print.source)
self.print_generator(generator, self.return_to)
else:
raise("Unsupported Print Type %s" % last_print.print_type)
def print_file(self, *args, **kwargs):
self.print_options = [self._print_file, args, kwargs]
popup = LaserWarningPopup(title=_('Laser Safety Notice'), size_hint=(0.6, 0.6))
popup.bind(on_dismiss=self.is_safe)
popup.open()
def on_printer_point(self, instance, value):
self.printer_point_emphasis = False
self.printer_point_text = _('Printer Posisition || ') + 'X: %.1f, Y: %.1f' % ((value[0] * 200) - 100, (value[1] * 200) - 100)
def build_settings(self, settings):
self.setting_translation.refresh_settings(settings, self.config)
settings.interface.menu.close_button.text = self.translation(
_("Close"))
def on_pre_enter(self):
for (title, value) in self.parent.setting_translation.get_settings().items():
self.settings_popup.add_setting(ListElement(title=title, value=value))
self.ids.navigate_button.text_source = _('Cancel Print')
self.ids.navigate_button.background_color = [2.0, 0.0, 0.0, 1.0]
def on_printer_point(self, instance, value):
self.printer_point_emphasis = False
self.printer_point_text = _(
'Printer Posisition || ') + 'X: %.1f, Y: %.1f' % (
(value[0] * 200) - 100, (value[1] * 200) - 100)
def show_load(self):
self.last_directory = Config.getdefault('internal', 'last_directory', self.last_directory)
content = LoadDialog(load=self.load, cancel=self.dismiss_popup, last_directory=self.last_directory)
self._popup = I18NPopup(title_source=_("Load file"), content=content, size_hint=(0.9, 0.9))
self._popup.open()
def build(self):
model = 'resources/objects/Simple5Sided180TwistVaseBETA.obj'
text_source = _('Some Text')
return I18NObjImageButton(model=model, text_source=text_source)
def build_settings(self, settings):
self.setting_translation.refresh_settings(settings, self.config)
settings.interface.menu.close_button.text = self.translation(_("Close"))
def on_pre_enter(self):
for (title, value) in self.parent.setting_translation.get_settings().items():
self.settings_popup.add_setting(ListElement(title=title, value=value))
self.ids.navigate_button.text_source = _('Cancel Print')
def _bootloader_required(self):
self.update_button.parent.remove_widget(self.update_button)
FirmwareManualBootloaderPopup().open()
return _('Unsupported')
