class TestWrapper(object):
"""
Module wrapping boiler plate code for all test setups and cleanups.
"""
# With the current mask value of 24 in TEST_IP_BLOCK, we can allocate a
# maximum of 255 UE IP addresses only. Moreover, magma has reserved 12 IP
# addresses for testing purpose, hence maximum allowed free IP addresses
# are 243. We need to change this mask value in order to allocate more than
# 243 UE IP addresses. Therefore, with the mask value of n, the maximum
# number of UE IP addresses allowed will be ((2^(32-n)) - 13).
# Example:
# mask value 24, max allowed UE IP addresses = ((2^(32-24)) - 13) = 243
# mask value 20, max allowed UE IP addresses = ((2^(32-20)) - 13) = 4083
# mask value 17, max allowed UE IP addresses = ((2^(32-17)) - 13) = 32755
# Decreasing the mask value will provide more UE IP addresses in the free
# IP address pool
TEST_IP_BLOCK = "192.168.128.0/24"
MSX_S1_RETRY = 2
def __init__(self):
"""
Initialize the various classes required by the tests and setup.
"""
self._s1_util = S1ApUtil()
self._enBConfig()
subscriber_client = SubscriberDbGrpc()
mobility_client = MobilityServiceGrpc()
magmad_client = MagmadServiceGrpc()
self._sub_util = SubscriberUtil(subscriber_client)
# Remove existing subscribers to start
self._sub_util.cleanup()
self._mobility_util = MobilityUtil(mobility_client)
self._mobility_util.cleanup()
self._magmad_util = MagmadUtil(magmad_client)
# gateway tests don't require restart, just wait for healthy now
self._gateway_services = GatewayServicesUtil()
self.wait_gateway_healthy = True
if not self.wait_gateway_healthy:
self.init_s1ap_tester()
self._configuredUes = []
self._ue_idx = 0 # Index of UEs already used in test
self._trf_util = TrafficUtil()
def init_s1ap_tester(self):
"""
Initialize the s1ap tester and the UEApp.
Doing this separately allows initialization to occur during
tests rather than during setup stage.
"""
# config ip first, because cloud tests will restart gateway
self.configIpBlock()
self._s1setup()
self._configUEApp()
@property
def _test_cloud(self):
test_cloud = os.getenv("MAGMA_S1APTEST_USE_CLOUD") is not None
return test_cloud
@property
def _test_oai_upstream(self):
return os.getenv("TEST_OAI_UPSTREAM") is not None
def _enBConfig(self):
"""Helper to configure the eNB"""
# Using exaggerated prints makes the stdout easier to read.
print("************************* Enb tester config")
req = s1ap_types.FwNbConfigReq_t()
req.cellId_pr.pres = True
req.cellId_pr.cell_id = 10
assert self._s1_util.issue_cmd(s1ap_types.tfwCmd.ENB_CONFIG, req) == 0
response = self._s1_util.get_response()
assert response.msg_type == s1ap_types.tfwCmd.ENB_CONFIG_CONFIRM.value
res = response.cast(s1ap_types.FwNbConfigCfm_t)
assert res.status == s1ap_types.CfgStatus.CFG_DONE.value
def _issue_s1setup_req(self):
""" Issue the actual setup request and get the response"""
req = None
assert self._s1_util.issue_cmd(s1ap_types.tfwCmd.ENB_S1_SETUP_REQ,
req) == 0
response = self._s1_util.get_response()
assert response.msg_type == s1ap_types.tfwCmd.ENB_S1_SETUP_RESP.value
return response.cast(s1ap_types.FwNbS1setupRsp_t)
def _s1setup(self):
"""Helper to setup s1 to the EPC"""
print("************************* S1 setup")
res = self._issue_s1setup_req()
retry = 0
while retry < TestWrapper.MSX_S1_RETRY:
if (res.res == s1ap_types.S1_setp_Result.S1_SETUP_FAILED.value
and res.waitIe.pres == 1):
print(
"Received time to wait in S1-Setup-Failure"
" message is",
res.waitIe.val,
)
time.sleep(res.waitIe.val)
res = self._issue_s1setup_req()
retry += 1
else:
# Not a failure in setup.
break
assert res.res == s1ap_types.S1_setp_Result.S1_SETUP_SUCCESS.value
def _configUEApp(self):
""" Update the internal configuration of the UEApp"""
print("************************* UE App config")
req = s1ap_types.ueAppConfig_t()
req.nasProcGuardTimer_pr.pres = True
req.nasProcGuardTimer_pr.nas_proc_guard_timer = 5
assert self._s1_util.issue_cmd(s1ap_types.tfwCmd.UE_APPL_CONFIG,
req) == 0
response = self._s1_util.get_response()
assert s1ap_types.tfwCmd.UE_APP_CONFIG_COMPLETE_IND.value == response.msg_type
def _getAddresses(self, *ues):
""" Retrieve IP addresses for the given UEs
Will put None for IPs in the cases where a UE has been included that
doesn't have a cached IP (e.g. the UE has not yet been attached)
Args:
ues (list(s1ap_types.ueAppConfig_t)): the UEs whose IPs we want
Returns a list of ipaddress.ip_address objects, corresponding in order
with the input UE parameters
"""
return [self._s1_util.get_ip(ue.ue_id) for ue in ues]
def configIpBlock(self):
""" Removes any existing allocated blocks, then adds the ones used for
testing """
print("************************* Configuring IP block")
self._mobility_util.remove_all_ip_blocks()
self._mobility_util.add_ip_block(self.TEST_IP_BLOCK)
print("************************* Waiting for IP changes to propagate")
self._mobility_util.wait_for_changes()
def configUEDevice(self, num_ues):
""" Configure the device on the UE side """
reqs = self._sub_util.add_sub(num_ues=num_ues)
for i in range(num_ues):
print("************************* UE device config for ue_id ",
reqs[i].ue_id)
assert self._s1_util.issue_cmd(s1ap_types.tfwCmd.UE_CONFIG,
reqs[i]) == 0
response = self._s1_util.get_response()
assert s1ap_types.tfwCmd.UE_CONFIG_COMPLETE_IND.value == response.msg_type
self._configuredUes.append(reqs[i])
self.check_gw_health_after_ue_load()
def configAPN(self, imsi, apn_list):
""" Configure the APN """
self._sub_util.config_apn_data(imsi, apn_list)
def configUEDevice_ues_same_imsi(self, num_ues):
""" Configure the device on the UE side with same IMSI and
having different ue-id"""
reqs = self._sub_util.add_sub(num_ues=num_ues)
for i in range(num_ues):
print("************************* UE device config for ue_id ",
reqs[i].ue_id)
assert self._s1_util.issue_cmd(s1ap_types.tfwCmd.UE_CONFIG,
reqs[i]) == 0
response = self._s1_util.get_response()
assert s1ap_types.tfwCmd.UE_CONFIG_COMPLETE_IND.value == response.msg_type
self._configuredUes.append(reqs[i])
for i in range(num_ues):
reqs[i].ue_id = 2
print("************************* UE device config for ue_id ",
reqs[i].ue_id)
assert self._s1_util.issue_cmd(s1ap_types.tfwCmd.UE_CONFIG,
reqs[i]) == 0
response = self._s1_util.get_response()
assert s1ap_types.tfwCmd.UE_CONFIG_COMPLETE_IND.value == response.msg_type
self._configuredUes.append(reqs[i])
self.check_gw_health_after_ue_load()
def configUEDevice_without_checking_gw_health(self, num_ues):
""" Configure the device on the UE side """
reqs = self._sub_util.add_sub(num_ues=num_ues)
for i in range(num_ues):
print("************************* UE device config for ue_id ",
reqs[i].ue_id)
assert self._s1_util.issue_cmd(s1ap_types.tfwCmd.UE_CONFIG,
reqs[i]) == 0
response = self._s1_util.get_response()
assert s1ap_types.tfwCmd.UE_CONFIG_COMPLETE_IND.value == response.msg_type
self._configuredUes.append(reqs[i])
def check_gw_health_after_ue_load(self):
""" Wait for the MME only after adding entries to HSS """
if self.wait_gateway_healthy:
self._gateway_services.wait_for_healthy_gateway()
self.init_s1ap_tester()
self.wait_gateway_healthy = False
def configDownlinkTest(self, *ues, **kwargs):
""" Set up an downlink test, returning a TrafficTest object
Args:
ues (s1ap_types.ueConfig_t): the UEs to test
kwargs: the keyword args to pass into generate_downlink_test
Returns: a TrafficTest object, the traffic test generated based on the
given UEs
"""
ips = self._getAddresses(*ues)
for ip, ue in zip(ips, ues):
if not ip:
raise ValueError("Encountered invalid IP for UE ID %s."
" Are you sure the UE is attached?" % ue)
return self._trf_util.generate_traffic_test(ips,
is_uplink=False,
**kwargs)
def configUplinkTest(self, *ues, **kwargs):
""" Set up an uplink test, returning a TrafficTest object
Args:
ues (s1ap_types.ueConfig_t): the UEs to test
kwargs: the keyword args to pass into generate_uplink_test
Returns: a TrafficTest object, the traffic test generated based on the
given UEs
"""
ips = self._getAddresses(*ues)
for ip, ue in zip(ips, ues):
if not ip:
raise ValueError("Encountered invalid IP for UE ID %s."
" Are you sure the UE is attached?" % ue)
return self._trf_util.generate_traffic_test(ips,
is_uplink=True,
**kwargs)
def get_gateway_services_util(self):
""" Not a property, so return object is callable """
return self._gateway_services
@property
def ue_req(self):
""" Get a configured UE """
req = self._configuredUes[self._ue_idx]
self._ue_idx += 1
return req
@property
def s1_util(self):
return self._s1_util
@property
def mobility_util(self):
return self._mobility_util
@property
def traffic_util(self):
return self._trf_util
@property
def magmad_util(self):
return self._magmad_util
def cleanup(self):
time.sleep(0.5)
print("************************* send SCTP SHUTDOWN")
self._s1_util.issue_cmd(s1ap_types.tfwCmd.SCTP_SHUTDOWN_REQ, None)
self._s1_util.cleanup()
self._sub_util.cleanup()
self._trf_util.cleanup()
self._mobility_util.cleanup()
# Cloud cleanup needs to happen after cleanup for
# subscriber util and mobility util
# if self._test_cloud:
# self._cloud_manager.clean_up()
def multiEnbConfig(self, num_of_enbs, enb_list=None):
if enb_list is None:
enb_list = []
req = s1ap_types.multiEnbConfigReq_t()
req.numOfEnbs = num_of_enbs
# ENB Parameter column index initialization
CELLID_COL_IDX = 0
TAC_COL_IDX = 1
ENBTYPE_COL_IDX = 2
PLMNID_COL_IDX = 3
PLMN_LENGTH_IDX = 4
for idx1 in range(num_of_enbs):
req.multiEnbCfgParam[idx1].cell_id = enb_list[idx1][CELLID_COL_IDX]
req.multiEnbCfgParam[idx1].tac = enb_list[idx1][TAC_COL_IDX]
req.multiEnbCfgParam[idx1].enbType = enb_list[idx1][
ENBTYPE_COL_IDX]
req.multiEnbCfgParam[idx1].plmn_length = enb_list[idx1][
PLMN_LENGTH_IDX]
for idx2 in range(req.multiEnbCfgParam[idx1].plmn_length):
val = enb_list[idx1][PLMNID_COL_IDX][idx2]
req.multiEnbCfgParam[idx1].plmn_id[idx2] = int(val)
print("***************** Sending Multiple Enb Config Request\n")
assert (self._s1_util.issue_cmd(
s1ap_types.tfwCmd.MULTIPLE_ENB_CONFIG_REQ, req) == 0)
def sendActDedicatedBearerAccept(self, ue_id, bearerId):
act_ded_bearer_acc = s1ap_types.UeActDedBearCtxtAcc_t()
act_ded_bearer_acc.ue_Id = ue_id
act_ded_bearer_acc.bearerId = bearerId
self._s1_util.issue_cmd(s1ap_types.tfwCmd.UE_ACT_DED_BER_ACC,
act_ded_bearer_acc)
print("************** Sending activate dedicated EPS bearer "
"context accept\n")
def sendDeactDedicatedBearerAccept(self, ue_id, bearerId):
deact_ded_bearer_acc = s1ap_types.UeDeActvBearCtxtAcc_t()
deact_ded_bearer_acc.ue_Id = ue_id
deact_ded_bearer_acc.bearerId = bearerId
self._s1_util.issue_cmd(s1ap_types.tfwCmd.UE_DEACTIVATE_BER_ACC,
deact_ded_bearer_acc)
print("************* Sending deactivate EPS bearer context accept\n")
def sendPdnConnectivityReq(self,
ue_id,
apn,
pdn_type=1,
pcscf_addr_type=None):
req = s1ap_types.uepdnConReq_t()
req.ue_Id = ue_id
# Initial Request
req.reqType = 1
req.pdnType_pr.pres = 1
# PDN Type 1 = IPv4, 2 = IPv6, 3 = IPv4v6
req.pdnType_pr.pdn_type = pdn_type
req.pdnAPN_pr.pres = 1
req.pdnAPN_pr.len = len(apn)
req.pdnAPN_pr.pdn_apn = (ctypes.c_ubyte * 100)(
*[ctypes.c_ubyte(ord(c)) for c in apn[:100]])
print("********* PDN type", pdn_type)
# Populate PCO if pcscf_addr_type is set
if pcscf_addr_type:
print("********* pcscf_addr_type", pcscf_addr_type)
self._s1_util.populate_pco(req.protCfgOpts_pr, pcscf_addr_type)
self.s1_util.issue_cmd(s1ap_types.tfwCmd.UE_PDN_CONN_REQ, req)
print("************* Sending Standalone PDN Connectivity Request\n")
class TestWrapper(object):
"""
Module wrapping boiler plate code for all test setups and cleanups.
"""
# With the current mask value of 24 in TEST_IP_BLOCK, we can allocate a
# maximum of 255 UE IP addresses only. Moreover, magma has reserved 12 IP
# addresses for testing purpose, hence maximum allowed free IP addresses
# are 243. We need to change this mask value in order to allocate more than
# 243 UE IP addresses. Therefore, with the mask value of n, the maximum
# number of UE IP addresses allowed will be ((2^(32-n)) - 13).
# Example:
# mask value 24, max allowed UE IP addresses = ((2^(32-24)) - 13) = 243
# mask value 20, max allowed UE IP addresses = ((2^(32-20)) - 13) = 4083
# mask value 17, max allowed UE IP addresses = ((2^(32-17)) - 13) = 32755
# Decreasing the mask value will provide more UE IP addresses in the free
# IP address pool
TEST_IP_BLOCK = "192.168.128.0/24"
MSX_S1_RETRY = 2
IS_TEST_RUNNING_FIRST_TIME = True
def __init__(
self,
stateless_mode=MagmadUtil.stateless_cmds.ENABLE,
apn_correction=MagmadUtil.apn_correction_cmds.DISABLE,
health_service=MagmadUtil.health_service_cmds.DISABLE,
):
"""
Initialize the various classes required by the tests and setup.
"""
if not TestWrapper.IS_TEST_RUNNING_FIRST_TIME:
print("\n**Running the test case again to identify flaky behavior")
TestWrapper.IS_TEST_RUNNING_FIRST_TIME = False
t = time.localtime()
current_time = time.strftime("%H:%M:%S", t)
print("Start time", current_time)
self._s1_util = S1ApUtil()
self._enBConfig()
if self._test_oai_upstream:
subscriber_client = SubscriberDbCassandra()
self.wait_gateway_healthy = False
else:
subscriber_client = SubscriberDbGrpc()
self.wait_gateway_healthy = True
mobility_client = MobilityServiceGrpc()
magmad_client = MagmadServiceGrpc()
self._sub_util = SubscriberUtil(subscriber_client)
# Remove existing subscribers to start
self._sub_util.cleanup()
self._mobility_util = MobilityUtil(mobility_client)
self._mobility_util.cleanup()
self._magmad_util = MagmadUtil(magmad_client)
self._magmad_util.config_stateless(stateless_mode)
self._magmad_util.config_apn_correction(apn_correction)
self._magmad_util.config_health_service(health_service)
# gateway tests don't require restart, just wait for healthy now
self._gateway_services = GatewayServicesUtil()
if not self.wait_gateway_healthy:
self.init_s1ap_tester()
self._configuredUes = []
self._ue_idx = 0 # Index of UEs already used in test
self._trf_util = TrafficUtil()
def init_s1ap_tester(self):
"""
Initialize the s1ap tester and the UEApp.
Doing this separately allows initialization to occur during
tests rather than during setup stage.
"""
# config ip first, because cloud tests will restart gateway
self.configIpBlock()
self._s1setup()
self._configUEApp()
@property
def _test_cloud(self):
test_cloud = os.getenv("MAGMA_S1APTEST_USE_CLOUD") is not None
return test_cloud
@property
def _test_oai_upstream(self):
return os.getenv("TEST_OAI_UPSTREAM") is not None
def _enBConfig(self):
"""Configure the eNB in S1APTester"""
# Using exaggerated prints makes the stdout easier to read.
print("************************* Enb tester config")
req = s1ap_types.FwNbConfigReq_t()
req.cellId_pr.pres = True
req.cellId_pr.cell_id = 10
assert self._s1_util.issue_cmd(s1ap_types.tfwCmd.ENB_CONFIG, req) == 0
response = self._s1_util.get_response()
assert response.msg_type == s1ap_types.tfwCmd.ENB_CONFIG_CONFIRM.value
res = response.cast(s1ap_types.FwNbConfigCfm_t)
assert res.status == s1ap_types.CfgStatus.CFG_DONE.value
def _issue_s1setup_req(self):
""" Issue the actual setup request and get the response"""
req = None
assert (self._s1_util.issue_cmd(s1ap_types.tfwCmd.ENB_S1_SETUP_REQ,
req) == 0)
response = self._s1_util.get_response()
assert response.msg_type == s1ap_types.tfwCmd.ENB_S1_SETUP_RESP.value
return response.cast(s1ap_types.FwNbS1setupRsp_t)
def _s1setup(self):
"""Perform S1 setup to the EPC"""
print("************************* S1 setup")
res = self._issue_s1setup_req()
retry = 0
while retry < TestWrapper.MSX_S1_RETRY:
if (res.res == s1ap_types.S1_setp_Result.S1_SETUP_FAILED.value
and res.waitIe.pres == 1):
print(
"Received time to wait in S1-Setup-Failure"
" message is",
res.waitIe.val,
)
time.sleep(res.waitIe.val)
res = self._issue_s1setup_req()
retry += 1
else:
# Not a failure in setup.
break
assert res.res == s1ap_types.S1_setp_Result.S1_SETUP_SUCCESS.value
def _configUEApp(self):
""" Update the internal configuration of the UEApp"""
print("************************* UE App config")
req = s1ap_types.ueAppConfig_t()
req.nasProcGuardTimer_pr.pres = True
req.nasProcGuardTimer_pr.nas_proc_guard_timer = 5
assert (self._s1_util.issue_cmd(s1ap_types.tfwCmd.UE_APPL_CONFIG,
req) == 0)
response = self._s1_util.get_response()
assert (s1ap_types.tfwCmd.UE_APP_CONFIG_COMPLETE_IND.value ==
response.msg_type)
def _getAddresses(self, *ues):
""" Retrieve IP addresses for the given UEs
Will put None for IPs in the cases where a UE has been included that
doesn't have a cached IP (e.g. the UE has not yet been attached)
Args:
ues: (list(s1ap_types.ueAppConfig_t)): the UEs whose IPs we want
Returns:
A list of ipaddress.ip_address objects, corresponding in order
with the input UE parameters
"""
return [self._s1_util.get_ip(ue.ue_id) for ue in ues]
def configIpBlock(self):
""" Remove any existing allocated blocks, then adds the ones used for
testing """
print("************************* Configuring IP block")
self._mobility_util.remove_all_ip_blocks()
self._mobility_util.add_ip_block(self.TEST_IP_BLOCK)
print("************************* Waiting for IP changes to propagate")
self._mobility_util.wait_for_changes()
def configUEDevice(self, num_ues, req_data=None, static_ips=None):
""" Configure the device on the UE side """
if req_data is None:
req_data = []
if static_ips is None:
static_ips = []
reqs = self._sub_util.add_sub(num_ues=num_ues)
for i in range(num_ues):
print(
"************************* UE device config for ue_id ",
reqs[i].ue_id,
)
if req_data and bool(req_data[i]):
if req_data[i].ueNwCap_pr.pres:
reqs[i].ueNwCap_pr.pres = req_data[i].ueNwCap_pr.pres
reqs[i].ueNwCap_pr.eea2_128 = req_data[
i].ueNwCap_pr.eea2_128
reqs[i].ueNwCap_pr.eea1_128 = req_data[
i].ueNwCap_pr.eea1_128
reqs[i].ueNwCap_pr.eea0 = req_data[i].ueNwCap_pr.eea0
reqs[i].ueNwCap_pr.eia2_128 = req_data[
i].ueNwCap_pr.eia2_128
reqs[i].ueNwCap_pr.eia1_128 = req_data[
i].ueNwCap_pr.eia1_128
reqs[i].ueNwCap_pr.eia0 = req_data[i].ueNwCap_pr.eia0
assert (self._s1_util.issue_cmd(s1ap_types.tfwCmd.UE_CONFIG,
reqs[i]) == 0)
response = self._s1_util.get_response()
assert (s1ap_types.tfwCmd.UE_CONFIG_COMPLETE_IND.value ==
response.msg_type)
# APN configuration below can be overwritten in the test case
# after configuring UE device.
if i < len(static_ips):
ue_ip = static_ips[i]
else:
ue_ip = None
self.configAPN(
imsi="IMSI" + "".join([str(j) for j in reqs[i].imsi]),
apn_list=None,
default=True,
static_ip=ue_ip,
)
self._configuredUes.append(reqs[i])
self.check_gw_health_after_ue_load()
def configUEDevice_ues_same_imsi(self, num_ues):
""" Configure the device on the UE side with same IMSI and
having different ue-id
Args:
num_ues: Count of UEs to be configured
"""
reqs = self._sub_util.add_sub(num_ues=num_ues)
for i in range(num_ues):
print(
"************************* UE device config for ue_id ",
reqs[i].ue_id,
)
assert (self._s1_util.issue_cmd(s1ap_types.tfwCmd.UE_CONFIG,
reqs[i]) == 0)
response = self._s1_util.get_response()
assert (s1ap_types.tfwCmd.UE_CONFIG_COMPLETE_IND.value ==
response.msg_type)
# APN configuration below can be overwritten in the test case
# after configuring UE device.
self.configAPN(
"IMSI" + "".join([str(j) for j in reqs[i].imsi]),
None,
)
self._configuredUes.append(reqs[i])
for i in range(num_ues):
reqs[i].ue_id = 2
print(
"************************* UE device config for ue_id ",
reqs[i].ue_id,
)
assert (self._s1_util.issue_cmd(s1ap_types.tfwCmd.UE_CONFIG,
reqs[i]) == 0)
response = self._s1_util.get_response()
assert (s1ap_types.tfwCmd.UE_CONFIG_COMPLETE_IND.value ==
response.msg_type)
self._configuredUes.append(reqs[i])
self.check_gw_health_after_ue_load()
def configUEDevice_without_checking_gw_health(self, num_ues):
""" Configure the device on the UE side """
reqs = self._sub_util.add_sub(num_ues=num_ues)
for i in range(num_ues):
print(
"************************* UE device config for ue_id ",
reqs[i].ue_id,
)
assert (self._s1_util.issue_cmd(s1ap_types.tfwCmd.UE_CONFIG,
reqs[i]) == 0)
response = self._s1_util.get_response()
assert (s1ap_types.tfwCmd.UE_CONFIG_COMPLETE_IND.value ==
response.msg_type)
# APN configuration below can be overwritten in the test case
# after configuring UE device.
self.configAPN(
"IMSI" + "".join([str(j) for j in reqs[i].imsi]),
None,
)
self._configuredUes.append(reqs[i])
def configAPN(self, imsi, apn_list, default=True, static_ip=None):
""" Configure the APN """
# add a default APN to be used in attach requests
if default:
magma_default_apn = {
"apn_name": "magma.ipv4", # APN-name
"qci": 9, # qci
"priority": 15, # priority
"pre_cap": 1, # preemption-capability
"pre_vul": 0, # preemption-vulnerability
"mbr_ul": 200000000, # MBR UL
"mbr_dl": 100000000, # MBR DL
"static_ip": static_ip,
}
# APN list to be configured
if apn_list is not None:
apn_list.insert(0, magma_default_apn)
else:
apn_list = [magma_default_apn]
self._sub_util.config_apn_data(imsi, apn_list)
def check_gw_health_after_ue_load(self):
""" Wait for the MME only after adding entries to HSS """
if self.wait_gateway_healthy:
self._gateway_services.wait_for_healthy_gateway()
self.init_s1ap_tester()
self.wait_gateway_healthy = False
def configDownlinkTest(self, *ues, **kwargs):
""" Set up an downlink test, returning a TrafficTest object
Args:
ues (s1ap_types.ueConfig_t): the UEs to test
kwargs: the keyword args to pass into generate_downlink_test
Returns:
A TrafficTest object, the traffic test generated based on the
given UEs
Raises:
ValueError: If no valid IP is found
"""
# Configure downlink route in TRF server
assert self._trf_util.update_dl_route(self.TEST_IP_BLOCK)
ips = self._getAddresses(*ues)
for ip, ue in zip(ips, ues):
if not ip:
raise ValueError(
"Encountered invalid IP for UE ID %s."
" Are you sure the UE is attached?" % ue, )
return self._trf_util.generate_traffic_test(
ips,
is_uplink=False,
**kwargs,
)
def configUplinkTest(self, *ues, **kwargs):
""" Set up an uplink test, returning a TrafficTest object
Args:
ues (s1ap_types.ueConfig_t): the UEs to test
kwargs: the keyword args to pass into generate_uplink_test
Returns:
A TrafficTest object, the traffic test generated based on the
given UEs
Raises:
ValueError: If no valid IP is found
"""
ips = self._getAddresses(*ues)
for ip, ue in zip(ips, ues):
if not ip:
raise ValueError(
"Encountered invalid IP for UE ID %s."
" Are you sure the UE is attached?" % ue, )
return self._trf_util.generate_traffic_test(
ips,
is_uplink=True,
**kwargs,
)
def get_gateway_services_util(self):
""" Not a property, so return object is callable """
return self._gateway_services
@property
def ue_req(self):
""" Get a configured UE """
req = self._configuredUes[self._ue_idx]
self._ue_idx += 1
return req
@property
def s1_util(self):
"""Get s1_util instance"""
return self._s1_util
@property
def mobility_util(self):
"""Get mobility_util instance"""
return self._mobility_util
@property
def traffic_util(self):
"""Get traffic_util instance"""
return self._trf_util
@property
def magmad_util(self):
"""Get magmad_util instance"""
return self._magmad_util
@classmethod
def is_test_successful(cls, test) -> bool:
"""Get current test case execution status"""
if test is None:
test = inspect.currentframe().f_back.f_back.f_locals["self"]
if test is not None and hasattr(test, "_outcome"):
result = test.defaultTestResult()
test._feedErrorsToResult(result, test._outcome.errors)
test_contains_error = result.errors and result.errors[-1][0] is test
test_contains_failure = result.failures and result.failures[-1][
0] is test
return not (test_contains_error or test_contains_failure)
def cleanup(self, test=None):
"""Cleanup test setup after testcase execution"""
is_test_successful = self.is_test_successful(test)
time.sleep(0.5)
print("************************* send SCTP SHUTDOWN")
self._s1_util.issue_cmd(s1ap_types.tfwCmd.SCTP_SHUTDOWN_REQ, None)
if not is_test_successful:
print("************************* Cleaning up TFW")
self._s1_util.issue_cmd(s1ap_types.tfwCmd.TFW_CLEANUP, None)
self._s1_util.delete_ovs_flow_rules()
self._s1_util.cleanup()
self._sub_util.cleanup()
self._trf_util.cleanup()
self._mobility_util.cleanup()
self._magmad_util.print_redis_state()
if not is_test_successful:
print("The test has failed. Restarting Sctpd for cleanup")
self.magmad_util.restart_sctpd()
self.magmad_util.print_redis_state()
def multiEnbConfig(self, num_of_enbs, enb_list=None):
"""Configure multiple eNB in S1APTester"""
if enb_list is None:
enb_list = []
req = s1ap_types.multiEnbConfigReq_t()
req.numOfEnbs = num_of_enbs
# ENB Parameter column index initialization
cellid_col_idx = 0
tac_col_idx = 1
enbtype_col_idx = 2
plmnid_col_idx = 3
plmn_length_idx = 4
for idx1 in range(num_of_enbs):
req.multiEnbCfgParam[idx1].cell_id = enb_list[idx1][cellid_col_idx]
req.multiEnbCfgParam[idx1].tac = enb_list[idx1][tac_col_idx]
req.multiEnbCfgParam[idx1].enbType = enb_list[idx1][
enbtype_col_idx]
req.multiEnbCfgParam[idx1].plmn_length = enb_list[idx1][
plmn_length_idx]
for idx2 in range(req.multiEnbCfgParam[idx1].plmn_length):
val = enb_list[idx1][plmnid_col_idx][idx2]
req.multiEnbCfgParam[idx1].plmn_id[idx2] = int(val)
print("***************** Sending Multiple Enb Config Request\n")
assert (self._s1_util.issue_cmd(
s1ap_types.tfwCmd.MULTIPLE_ENB_CONFIG_REQ,
req,
) == 0)
def sendActDedicatedBearerAccept(self, ue_id, bearer_id):
"""Send Activate Dedicated Bearer Accept message"""
act_ded_bearer_acc = s1ap_types.UeActDedBearCtxtAcc_t()
act_ded_bearer_acc.ue_Id = ue_id
act_ded_bearer_acc.bearerId = bearer_id
self._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_ACT_DED_BER_ACC,
act_ded_bearer_acc,
)
print(
"************** Sending activate dedicated EPS bearer "
"context accept\n", )
def sendDeactDedicatedBearerAccept(self, ue_id, bearer_id):
"""Send Deactivate Dedicated Bearer Accept message"""
deact_ded_bearer_acc = s1ap_types.UeDeActvBearCtxtAcc_t()
deact_ded_bearer_acc.ue_Id = ue_id
deact_ded_bearer_acc.bearerId = bearer_id
self._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_DEACTIVATE_BER_ACC,
deact_ded_bearer_acc,
)
print("************* Sending deactivate EPS bearer context accept\n")
def sendPdnConnectivityReq(
self,
ue_id,
apn,
pdn_type=1,
pcscf_addr_type=None,
dns_ipv6_addr=False,
):
"""Send PDN Connectivity Request message"""
req = s1ap_types.uepdnConReq_t()
req.ue_Id = ue_id
# Initial Request
req.reqType = 1
req.pdnType_pr.pres = 1
# PDN Type 1 = IPv4, 2 = IPv6, 3 = IPv4v6
req.pdnType_pr.pdn_type = pdn_type
req.pdnAPN_pr.pres = 1
req.pdnAPN_pr.len = len(apn)
req.pdnAPN_pr.pdn_apn = (ctypes.c_ubyte * 100)(
*[ctypes.c_ubyte(ord(c)) for c in apn[:100]], )
print("********* PDN type", pdn_type)
# Populate PCO if pcscf_addr_type is set
if pcscf_addr_type or dns_ipv6_addr:
self._s1_util.populate_pco(
req.protCfgOpts_pr,
pcscf_addr_type,
dns_ipv6_addr,
)
self.s1_util.issue_cmd(s1ap_types.tfwCmd.UE_PDN_CONN_REQ, req)
print("************* Sending Standalone PDN Connectivity Request\n")
def flush_arp(self):
"""Flush all ARP entries"""
self._magmad_util.exec_command_output("sudo ip neigh flush all", )
print("magma-dev: ARP flushed")