def save_image(self, path):
if self.data_buffer:
if path.lower().endswith(".bin"):
with open(path, "wb") as f:
f.write(self.data_buffer)
f.close()
elif path.lower().endswith(".hex"):
ihex = IntelHex()
ihex.frombytes(self.data_buffer, 0)
ihex.start_addr = self.FlashStartAddress
try:
ihex.tofile(path, format="hex")
except Exception as e:
wx.MessageBox(
"Could not write into file: %s\n\n%s" % (path, str(e)), "ERROR", wx.OK | wx.ICON_ERROR
)
elif path.lower().endswith((".s19", ".srec")):
srec = SRecFile()
srec.header = "KBOOT"
srec.start_addr = self.FlashStartAddress
srec.data = self.data_buffer
try:
srec.save(path)
except Exception as e:
wx.MessageBox(
"Could not write into file: %s\n\n%s" % (path, str(e)), "ERROR", wx.OK | wx.ICON_ERROR
)
else:
wx.MessageBox("Not supported file Type !", "ERROR", wx.OK | wx.ICON_ERROR)
else:
wx.MessageBox("No data to save", "INFO", wx.OK | wx.ICON_INFORMATION)
def append_validation_data(signature, input_file, public_key, offset,
output_hex, output_bin, magic_value):
ih = IntelHex(input_file)
ih.start_addr = None # OBJCOPY incorrectly inserts x86 specific records, remove the start_addr as it is wrong.
minimum_offset = ((ih.maxaddr() // 4) + 1) * 4
if offset != 0 and offset < minimum_offset:
raise RuntimeError(
f'Incorrect offset, must be bigger than {hex(minimum_offset)}')
# Parse comma-separated string of uint32s into hex string. Each is encoded in little-endian byte order
parsed_magic_value = b''.join(
[struct.pack('<I', int(m, 0)) for m in magic_value.split(',')])
validation_data = get_validation_data(signature_bytes=signature,
input_hex=ih,
public_key=public_key,
magic_value=parsed_magic_value)
validation_data_hex = IntelHex()
# If no offset is given, append metadata right after input hex file (word aligned).
if offset == 0:
offset = minimum_offset
validation_data_hex.frombytes(validation_data, offset)
ih.merge(validation_data_hex)
ih.write_hex_file(output_hex)
if output_bin:
ih.tofile(output_bin.name, format='bin')
def sign_and_append_validation_data(pem_file, input_file, offset, output_file,
magic_value, pk_hash_len):
ih = IntelHex(input_file)
ih.start_addr = None # OBJCOPY incorrectly inserts x86 specific records, remove the start_addr as it is wrong.
minimum_offset = ((ih.maxaddr() // 4) + 1) * 4
if offset != 0 and offset < minimum_offset:
raise RuntimeError("Incorrect offset, must be bigger than %x" %
minimum_offset)
# Parse comma-separated string of uint32s into hex string. Each in is encoded
# in little-endian byte order
parsed_magic_value = b''.join(
[struct.pack("<I", int(m, 0)) for m in magic_value.split(",")])
validation_data = get_validation_data(pem_file=pem_file,
input_hex=ih,
magic_value=parsed_magic_value,
pk_hash_len=pk_hash_len)
validation_data_hex = IntelHex()
# If no offset is given, append metadata right after input hex file (word aligned).
if offset == 0:
offset = minimum_offset
validation_data_hex.frombytes(validation_data, offset)
ih.merge(validation_data_hex)
ih.write_hex_file(output_file)
def generate_provision_hex_file(s0_address, s1_address, hashes,
provision_address, output, max_size,
num_counter_slots_version):
# Add addresses
provision_data = struct.pack('III', s0_address, s1_address, len(hashes))
for mhash in hashes:
provision_data += struct.pack('I', 0xFFFFFFFF) # Invalidation token
provision_data += mhash
num_counters = 1 if num_counter_slots_version > 0 else 0
provision_data += struct.pack('H', 1) # Type "counter collection"
provision_data += struct.pack('H', num_counters)
if num_counters == 1:
if num_counter_slots_version % 2 == 1:
num_counter_slots_version += 1
print(
f'Monotonic counter slots rounded up to {num_counter_slots_version}'
)
provision_data += struct.pack('H', 1) # counter description
provision_data += struct.pack('H', num_counter_slots_version)
assert (len(provision_data) + (2 * num_counter_slots_version)
) <= max_size, """Provisioning data doesn't fit.
Reduce the number of public keys or counter slots and try again."""
ih = IntelHex()
ih.frombytes(provision_data, offset=provision_address)
ih.write_hex_file(output)
def save(self, path, hex_addr=None):
"""Save an image from a given file"""
ext = os.path.splitext(path)[1][1:].lower()
if ext == INTEL_HEX_EXT:
# input was in binary format, but HEX needs to know the base addr
if self.base_addr is None and hex_addr is None:
raise click.UsageError("No address exists in input file "
"neither was it provided by user")
h = IntelHex()
if hex_addr is not None:
self.base_addr = hex_addr
h.frombytes(bytes=self.payload, offset=self.base_addr)
if self.pad:
trailer_size = self._trailer_size(self.align, self.max_sectors,
self.overwrite_only,
self.enckey,
self.save_enctlv,
self.enctlv_len)
trailer_addr = (self.base_addr + self.slot_size) - trailer_size
padding = bytes([self.erased_val] *
(trailer_size - len(boot_magic))) + boot_magic
h.puts(trailer_addr, padding)
h.tofile(path, 'hex')
else:
if self.pad:
self.pad_to(self.slot_size)
with open(path, 'wb') as f:
f.write(self.payload)
def save_image(self, path):
if self.data_buffer:
if path.lower().endswith('.bin'):
with open(path, "wb") as f:
f.write(self.data_buffer)
f.close()
elif path.lower().endswith('.hex'):
ihex = IntelHex()
ihex.frombytes(self.data_buffer, 0)
ihex.start_addr = self.FlashStartAddress
try:
ihex.tofile(path, format='hex')
except Exception as e:
wx.MessageBox(
"Could not write into file: %s\n\n%s" % (path, str(e)),
'ERROR', wx.OK | wx.ICON_ERROR)
elif path.lower().endswith(('.s19', '.srec')):
srec = SRecFile()
srec.header = "KBOOT"
srec.start_addr = self.FlashStartAddress
srec.data = self.data_buffer
try:
srec.save(path)
except Exception as e:
wx.MessageBox(
"Could not write into file: %s\n\n%s" % (path, str(e)),
'ERROR', wx.OK | wx.ICON_ERROR)
else:
wx.MessageBox('Not supported file Type !', 'ERROR',
wx.OK | wx.ICON_ERROR)
else:
wx.MessageBox('No data to save', 'INFO',
wx.OK | wx.ICON_INFORMATION)
def generate_provision_hex_file(s0_address, s1_address, hashes, provision_address, output):
# Add addresses
provision_data = struct.pack('III', s0_address, s1_address, len(hashes))
provision_data += b''.join(hashes)
ih = IntelHex()
ih.frombytes(provision_data, offset=provision_address)
ih.write_hex_file(output)
def save(self, path):
"""Save an image from a given file"""
ext = os.path.splitext(path)[1][1:].lower()
if ext != INTEL_HEX_EXT:
raise Exception("Only hex input file supported")
h = IntelHex()
h.frombytes(bytes=self.payload, offset=self.load_address)
h.tofile(path, 'hex')
def generate_provision_hex_file(s0_address, s1_address, hashes, provision_address, output):
# Add addresses
provision_data = struct.pack('III', s0_address, s1_address, len(hashes))
for mhash in hashes:
provision_data += struct.pack('I', 0xFFFFFFFF) # Invalidation token
provision_data += mhash
ih = IntelHex()
ih.frombytes(provision_data, offset=provision_address)
ih.write_hex_file(output)
def test_read_micropython(mock_read_flash):
"""Test read_micropython() with default arguments."""
data_bytes = bytes([x for x in range(256)] * 4)
intel_hex = IntelHex()
intel_hex.frombytes(data_bytes)
ihex_str = ihex_to_str(intel_hex)
mock_read_flash.return_value = (0, data_bytes)
result = cmds.read_micropython()
assert result == ihex_str
def setUp(cls):
random.seed(420)
cls._bin_data = bytes([random.randint(0, 0xFF) for i in range(10000)])
ihex = IntelHex()
ihex.frombytes(cls._bin_data)
hex_data = io.StringIO()
ihex.write_hex_file(hex_data, write_start_addr=False)
cls._hex_data = codecs.encode(hex_data.getvalue(), encoding='ascii')
cls._args = [
'python3', 'qpsk/encoder.py', '-s', '48000', '-y', '6000', '-b',
'1K', '-f', '1K:40', '-a', '0', '-w', '10', '-p', '256'
]
def patch(message_func, ihex, hexf, align=256):
update_checksum = False
update_metadata = False
# calculate checksum of the program section, detect metadata
checksum = 0
for start, end in ihex.segments():
if start == CY_CHECKSUM_ADDR:
# checksum section found in the original hex
update_checksum = True
if start == CY_META_ADDR:
# metadata section found in the original hex
update_metadata = True
if start >= CY_PROGRAM_SIZE:
continue
segment = ihex.tobinarray(start, end)
checksum += sum(segment)
# only update checksum if it was found in the original hex
if update_checksum:
lowchecksum = checksum & 0x0FFFF
message_func("Calculated checksum for %s is 0x%04x" %
(hexf, lowchecksum))
checksum_str = pack('>H', lowchecksum)
ihex.frombytes(array('B', checksum_str), offset=CY_CHECKSUM_ADDR)
# only update metadata if it was found in the original hex
if update_metadata:
signature = unpack(
'>L', ihex.tobinstr(start=CY_META_SILICON_ID_ADDR, size=4))[0]
sigcheck = pack('>L', (checksum + signature) & 0x0FFFF)
ihex.frombytes(array('B', sigcheck), offset=CY_META_CHECKSUM_ADDR)
# align flash segments
align_mask = align - 1
alignments = IntelHex()
for start, end in ihex.segments():
if start >= CY_PROGRAM_SIZE:
continue
aligned_start = start & ~align_mask
if start != aligned_start:
message_func("Aligning start from 0x%x to 0x%x" %
(start, aligned_start))
alignments.frombytes(ihex.tobinarray(aligned_start, start - 1),
aligned_start)
aligned_end = end & ~align_mask
if end != aligned_end:
aligned_end += align
message_func("Aligning end from 0x%x to 0x%x" % (end, aligned_end))
alignments.frombytes(ihex.tobinarray(end, aligned_end - 1), end)
ihex.merge(alignments, 'ignore')
def save(self, path):
"""Save an image from a given file"""
ext = os.path.splitext(path)[1][1:].lower()
if ext == INTEL_HEX_EXT:
# input was in binary format, but HEX needs to know the base addr
if self.slot_address is None:
raise Exception("Input file does not provide a slot address")
h = IntelHex()
h.frombytes(bytes=self.payload, offset=self.slot_address)
h.tofile(path, 'hex')
else:
with open(path, 'wb') as f:
f.write(self.payload)
def patch_file(in_file, out_file, hex_file):
with open(in_file, 'rb') as i:
data = i.read()
padding = bytes([0xFF])
data = data.ljust(BL_SIZE, padding)
data = patch_data(data)
with open(out_file, 'wb') as df:
df.write(data)
if len(hex_file) > 0:
from intelhex import IntelHex
out = IntelHex()
out.frombytes(data, offset=BL_START)
out.write_hex_file(hex_file)
def generate(self, workspace, outBin=None, outHex=None, skip=False):
self.generated = False
self.generatedBinary = None
if self.valid:
try:
p = workspace.getParameters(self.parameters)
if p is not None:
if p.generateBinary(workspace, self):
if outBin is not None:
path = os.path.join(outBin, self.parameters)
if not os.path.isdir(path):
os.makedirs(path)
self.destinationBin = os.path.join(
path, self.name + ".bin")
sink = open(self.destinationBin, 'wb')
sink.write(p.generatedBinary)
else:
self.destinationBin = None
if outHex is not None:
path = os.path.join(outHex, self.parameters)
if not os.path.isdir(path):
os.makedirs(path)
self.destinationHex = os.path.join(
path, self.name + ".hex")
ih = IntelHex()
ih.frombytes(p.generatedBinary)
ih.tofile(self.destinationHex, "hex")
else:
self.destinationHex = None
self.generated = True
else:
self.reason = p.reason
else:
self.reason = "Cannot find a valid parameters file for '" + self.parameters + "'"
return self.generated
except IOError as e:
self.reason = CoreConsole.error(
str(e.strerror) + " [" +
CoreConsole.highlightFilename(e.filename) + "]")
CoreConsole.fail("ParametersTarget::generate: " + self.reason)
return False
def generate(self, workspace, outBin=None, outHex=None,skip=False):
self.generated = False
self.generatedBinary = None
if self.valid:
try:
p = workspace.getParameters(self.parameters)
if p is not None:
if p.generateBinary(workspace, self):
if outBin is not None:
path = os.path.join(outBin, self.parameters)
if not os.path.isdir(path):
os.makedirs(path)
self.destinationBin = os.path.join(path, self.name + ".bin")
sink = open(self.destinationBin, 'wb')
sink.write(p.generatedBinary)
else:
self.destinationBin = None
if outHex is not None:
path = os.path.join(outHex, self.parameters)
if not os.path.isdir(path):
os.makedirs(path)
self.destinationHex = os.path.join(path, self.name + ".hex")
ih = IntelHex()
ih.frombytes(p.generatedBinary)
ih.tofile(self.destinationHex, "hex")
else:
self.destinationHex = None
self.generated = True
else:
self.reason = p.reason
else:
self.reason = "Cannot find a valid parameters file for '" + self.parameters + "'"
return self.generated
except IOError as e:
self.reason = CoreConsole.error(str(e.strerror) + " [" + CoreConsole.highlightFilename(e.filename) + "]")
CoreConsole.fail("ParametersTarget::generate: " + self.reason)
return False
def readToFile(self, file, fileformat="bin"):
result = False
readData = self.read()
ih = IntelHex()
ih.frombytes(readData)
if fileformat in ("bin", "hex"):
ih.tofile(file, format=fileformat)
result = True
else:
raise DriverCapabilityError(
"Invalid Format. readToFile() does not support format={}".
format(format))
return result
def split_bin_to_ihex(file_name, base_addr, max_block_size):
"""Split a binary file to the blocks and load the blocks to IntelHex
objects. Return the list of IntelHex objects.
"""
# Block size must be aligned to 2 byte boundary (workaround for rf#2088)
assert max_block_size % 2 == 0
ihex_list = []
with open(file_name, 'rb') as f:
while True:
block = bytearray(f.read(max_block_size))
if not block:
break
# Align the last block to 2 byte boundary (workaround for rf#2088)
if len(block) % 2 != 0:
block.append(0xFF)
ihex = IntelHex()
ihex.frombytes(block, base_addr)
ihex_list.append(ihex)
return ihex_list
def _bytes_to_pretty_hex(data, offset=0x0000):
"""Convert a list of bytes to a nicely formatted ASCII decoded hex string.
:param data: List of integers, each representing a single byte.
:param offset: Start address offset.
:return: A string with the formatted hex data.
"""
i_hex = IntelHex()
i_hex.frombytes(data, offset)
fake_file = StringIO()
try:
i_hex.dump(tofile=fake_file, width=16, withpadding=False)
except IOError as e:
sys.stderr.write("ERROR: File write: {}\n{}".format(fake_file, str(e)))
return
pretty_hex_str = fake_file.getvalue()
fake_file.close()
return pretty_hex_str
def _bytes_to_intel_hex(data, offset=0x0000):
"""Take a list of bytes and return a string in the Intel Hex format.
:param data: List of integers, each representing a single byte.
:param offset: Start address offset.
:return: A string with the Intel Hex encoded data.
"""
i_hex = IntelHex()
i_hex.frombytes(data, offset)
fake_file = StringIO()
try:
i_hex.tofile(fake_file, format="hex")
except IOError as e:
sys.stderr.write("ERROR: File write: {}\n{}".format(fake_file, str(e)))
return
intel_hex_str = fake_file.getvalue()
fake_file.close()
return intel_hex_str
def patch(message_func, ihex, hexf, align=256):
#calculate checksum
checksum = 0
for start, end in ihex.segments():
if start >= 0x090000000:
continue
segment = ihex.tobinarray(start, end)
checksum += sum(segment)
lowchecksum = checksum & 0x0FFFF
message_func("Calculated checksum for %s is 0x%04x" % (hexf, lowchecksum))
# update checksum
checksum_str = pack('>H', lowchecksum)
ihex.frombytes(array('B', checksum_str), offset=0x90300000)
# update metadata
signature = unpack('>L', ihex.tobinstr(start=0x90500002, size=4))[0]
sigcheck = pack('>L', (checksum + signature) & 0x0FFFF)
ihex.frombytes(array('B', sigcheck), offset=0x90500008)
# align flash segments
align_mask = align - 1
alignments = IntelHex()
for start, end in ihex.segments():
if start >= 0x090000000:
continue
aligned_start = start & ~align_mask
if start != aligned_start:
message_func("Aligning start from 0x%x to 0x%x" %
(start, aligned_start))
alignments.frombytes(ihex.tobinarray(aligned_start, start - 1),
aligned_start)
aligned_end = end & ~align_mask
if end != aligned_end:
aligned_end += align
message_func("Aligning end from 0x%x to 0x%x" % (end, aligned_end))
alignments.frombytes(ihex.tobinarray(end, aligned_end - 1), end)
ihex.merge(alignments)
def read(addr, length, compress, file):
click.echo("\n Reading from MCU memory, please wait !\n")
# Call KBoot flash erase all function
data = KBOOT.read_memory(addr, length)
# Disconnect KBoot Device
KBOOT.disconnect()
if file is None:
click.echo(hexdump(data, addr, compress))
else:
if file.lower().endswith('.bin'):
with open(file, "wb") as f:
f.write(data)
f.close()
elif file.lower().endswith('.hex'):
ihex = IntelHex()
ihex.frombytes(data, 0)
ihex.start_addr = addr
try:
ihex.tofile(file, format='hex')
except Exception as e:
raise Exception('Could not write to file: %s \n [%s]' % (file, str(e)))
else:
srec = kboot.SRecFile()
srec.header = "pyKBoot"
srec.start_addr = addr
srec.data = data
try:
srec.save(file)
except Exception as e:
raise Exception('Could not write to file: %s \n [%s]' % (file, str(e)))
click.secho(" Successfully saved into: %s. \n" % file)
class Hex_File(object):
"""
This class handles patching the hex file with new device key and unicast address.
"""
def __init__(self, options):
"""
Initializer function.
Keyword arguments:
options -- Object created by parser.parse_args() that holds all the parameter values.
"""
try:
self.hf_db = MeshDB(options.db_input_file)
self.hf_hex_file = IntelHex(options.hex_input_file)
self.hf_number_of_nodes = len(self.hf_db.nodes)
self.hf_start_node = options.start_node
self.hf_mesh_sdk_version = options.mesh_sdk_version
self.hf_clone_copies = options.clone_copies
if (self.hf_mesh_sdk_version == 400):
self.START_OF_FLASH_MANAGER_OFFSET = 0x50
self.UNICAST_ADDRESS_OFFSET_1 = 0x1C
self.UNICAST_ADDRESS_OFFSET_2 = 0x4C
else:
#Else assuming v3.2.0 of Nordic Mesh SDK
self.START_OF_FLASH_MANAGER_OFFSET = 0x40
self.UNICAST_ADDRESS_OFFSET_1 = 0x1C
self.UNICAST_ADDRESS_OFFSET_2 = 0x3C
logging.debug('Start node is {0}'.format(self.hf_start_node))
if self.hf_start_node is not None:
self.hf_working_node = self.hf_db.nodes[self.hf_start_node]
else:
self.hf_working_node = self.hf_db.nodes[(
self.hf_number_of_nodes - 1)]
self.hf_output_hex_fw_name = options.hex_output_file
self.hf_new_device_key = options.device_key
self.hf_new_unicast_addr = options.unicast_address
self.hf_new_node_name = options.node_name
self._hf_iteration = 0
except Exception as ex:
logging.exception("Initialization error")
def _generate_new_device_key(self):
return uuid.uuid4().int.to_bytes(16, byteorder="big", signed=False)
def patch_hex_file(self):
"""
This function patches the hex file with the new device key and the new unicast address.
"""
try:
logging.debug('Patching for Mesh SDK version {0}'.format(
self.hf_mesh_sdk_version))
#Get the device key from the database file
self.hf_device_key = self.hf_working_node.device_key
#Convert hex data to byte string so we can easily find the device key
self.hf_input_hex_fw_bytestr = self.hf_hex_file.tobinstr()
#Convert hex data to byte array that will represent the output patched hex file
self.hf_output_hex_fw_bytearray = self.hf_hex_file.tobinarray()
#Find the index where the device key starts
logging.debug('Looking for device key {0}'.format(
self.hf_device_key.hex()))
self.hf_device_key_index = self.hf_input_hex_fw_bytestr.find(
self.hf_device_key)
if (self.hf_device_key_index == -1):
logging.info(
'Device key not found! Are you sure the correct node is specified (--start-node)? '
)
raise ValueError(
'Device key not found in hex file! Aborting!')
logging.info("Device key found at location {0}".format(
hex(self.hf_device_key_index)))
#Sanity check: for the infinitesimally small chance that the device key occurs elsewhere in the hex file naturally!
#Check for Flash Manager Area signature: https://infocenter.nordicsemi.com/index.jsp?topic=%2Fcom.nordic.infocenter.meshsdk.v4.0.0%2Fmd_doc_libraries_flash_manager.html
self.hf_expected_start_of_flash_manager_index = (
self.hf_device_key_index - self.START_OF_FLASH_MANAGER_OFFSET)
#This is where signature should be
self.hf_flash_manager_sign_found = self.hf_input_hex_fw_bytestr.startswith(
bytearray.fromhex('08041010'),
(self.hf_expected_start_of_flash_manager_index),
(self.hf_expected_start_of_flash_manager_index + 16))
if (self.hf_flash_manager_sign_found == False):
logging.info(
'Flash Area Manager signature not found at expected location {0}'
.format(hex(
self.hf_expected_start_of_flash_manager_index)))
raise ValueError(
'Flash Area Manager signature not found at expected location {0}'
.format(hex(
self.hf_expected_start_of_flash_manager_index)))
else:
logging.info(
'Flash Area Manager signature found at expected location {0}'
.format(hex(
self.hf_expected_start_of_flash_manager_index)))
#Get offset for both occurences of device handle which also need to be updated per device
self.hf_expected_device_uc_addr_index = (
self.hf_expected_start_of_flash_manager_index +
self.UNICAST_ADDRESS_OFFSET_1)
self.hf_expected_device_uc_addr_index_second = (
self.hf_expected_start_of_flash_manager_index +
self.UNICAST_ADDRESS_OFFSET_2)
#Create new unicast address by reading all existing unicast addresses in the db file, finding the max, and incrementing the largest one by one.
if self.hf_new_unicast_addr is None:
#Create a list of unicast addresses from the db file
self.unicast_address_list = []
for i in self.hf_db.nodes:
self.unicast_address_list.append(i.unicast_address)
#Find highest unicast address and increment by 1 to create new unicast address
self.next_unicast_address = max(self.unicast_address_list) + 1
logging.debug('Next available unicast address is {0}'.format(
hex(self.next_unicast_address)))
self.hf_new_unicast_addr = self.next_unicast_address
for x in range(self.hf_clone_copies):
####Patch and write the cloned fw
#Update device unicast address in output bytearray
self.hf_output_hex_fw_bytearray[
self.
hf_expected_device_uc_addr_index] = self.hf_new_unicast_addr
self.hf_output_hex_fw_bytearray[
self.
hf_expected_device_uc_addr_index_second] = self.hf_new_unicast_addr
#Generate new device key only if not specified on command line
if (self.hf_new_device_key is None):
self.hf_new_device_key = self._generate_new_device_key()
#Replace key in bytearray with new key
for i in range(0, 16):
self.hf_output_hex_fw_bytearray[
self.hf_device_key_index +
i] = self.hf_new_device_key[i]
#Create output IntelHex object...
self.hf_output_hex_fw = IntelHex()
#...and load it up with patched data
self.hf_output_hex_fw.frombytes(
self.hf_output_hex_fw_bytearray)
#Write out new patched fw file
#New file name for each clone, except first one
if (self._hf_iteration == 0):
logging.debug('Creating {0}'.format(
self.hf_output_hex_fw_name))
self.hf_output_hex_fw.write_hex_file(
self.hf_output_hex_fw_name)
else:
self._hf_output_hex_fw_name_list = re.split(
'(\W)', self.hf_output_hex_fw_name)
self._hf_output_hex_fw_name = self._hf_output_hex_fw_name_list[
0] + "_" + str(self._hf_iteration) + "".join(
self._hf_output_hex_fw_name_list[1:])
logging.debug('Creating {0}'.format(
self._hf_output_hex_fw_name))
self.hf_output_hex_fw.write_hex_file(
self._hf_output_hex_fw_name)
self._hf_iteration += 1
####Done patching and write the cloned fw
####Update JSON file with new node information
#Create a new node for the new firmware in the JSON file by shallow copying from the original node in the JSON file
self.hf_new_node = copy.copy(self.hf_working_node)
#Update device address and unicast address
self.hf_new_node.device_key = self.hf_new_device_key.hex()
self.hf_new_node.unicast_address = self.hf_new_unicast_addr
self.hf_db.nodes.append(self.hf_new_node)
#Update node name
if (self.hf_new_node_name is None):
self.hf_new_node.name += "_" + str(
self.hf_new_unicast_addr)
else:
self.hf_new_node.name = self.hf_new_node_name
#Store to file
self.hf_db.store()
####Done updating JSON file with new node information
####Reinitialize variables for next iteration, if any
#Reset the device key so new one is generated in next iteration in case multiple clones are requested.
#This also means if device key is specified on command-line and multiple clones requested then only first
#fw clone will have that specified key & the rest of clones will have auto-generated keys.
self.hf_new_device_key = None
#Increment unicast address for next node, if there are more iterations.
#This also means if unicast address is specified on command-line and multiple clones requested then only first
#fw clone will have that specified unicast address & the rest of clones will have unique unicast addresses generated by
#incrementing command-line specified node by 1.
self.hf_new_unicast_addr = self.hf_new_unicast_addr + 1
#Reset node name to none for next iteration, if there are more iterations
#This also means if node name is specified on command-line and multiple clones requested then only first
#fw clone will have that node name & the rest of clones will have auto-generated node names.
self.hf_new_node_name = None
####Done reinitializing variables for next iteration, if any
except Exception as ex:
logging.exception("Hex file patching error")
def generateNewHex():
tmp=open(bin_dir+program_name+"_modified.hex","w+");
ih=IntelHex(bin_dir+program_name+".hex");
binary=ih.tobinarray();
for p in pointers:
if 'rjmp' in p:
offset=int(p.split(":")[1],16);
destination=p.split(":")[3];
binary.pop(offset);
binary.pop(offset);
insertOpcodeJMP(destination,offset,binary);
elif 'jmp' in p:
offset=int(p.split(":")[1],16);
destination=p.split(":")[3];
binary.pop(offset);
binary.pop(offset);
binary.pop(offset);
binary.pop(offset);
insertOpcodeJMP(destination,offset,binary);
elif 'rcall' in p:
offset=int(p.split(":")[1],16);
destination=p.split(":")[3];
binary.pop(offset);
binary.pop(offset);
insertOpcodeCALL(destination,offset,binary);
elif 'call' in p:
offset=int(p.split(":")[1],16);
destination=p.split(":")[3];
binary.pop(offset);
binary.pop(offset);
binary.pop(offset);
binary.pop(offset);
insertOpcodeCALL(destination,offset,binary);
elif 'br' in p:
offset=int(p.split(":")[1],16);
destination=p.split(":")[3];
opcode=p.split(":")[4];
binary.pop(offset);
binary.pop(offset);
insertOpcodeBR(destination,offset,binary,opcode);
elif 'nop' in p:
offset=int(p.split(":")[1],16);
binary.insert(offset,0x00);
binary.insert(offset+1,0x00);
elif 'jump_link' in p:
offset=int(p.split(":")[1],16);
destination=p.split(":")[3];
insertOpcodeJMP(destination,offset,binary);
elif 'global_ctors' in p:
offset=int(p.split(":")[1],16);
destination=p.split(":")[3];
binary.pop(offset);
binary.pop(offset);
insertOpcodeGLOBAL_CTORS(destination,offset,binary);
elif 'vpointer' in p:
offset=int(p.split(":")[1],16)-0x800000-0x100+offsetDataInSRAM;
destination=p.split(":")[3];
binary.pop(offset);
binary.pop(offset);
insertOpcodeVPointers(destination,offset,binary);
elif 'ldi_data_offset' in p:
offset=int(p.split(":")[1],16);
destination=p.split(":")[3];
binary.pop(offset);
binary.pop(offset);
binary.pop(offset);
binary.pop(offset);
insertOpcodeLDI_destination(destination,offset,binary);
elif 'prologues' in p:
offset=int(p.split(":")[1],16);
destination=p.split(":")[3];
ad=destination.split("0x")[1];
while (len(ad)<4):
ad='0'+ad;
pc=address2pc(int(ad[0:2],16),int(ad[2:4],16));
destination="0x"+h(pc)+l(pc);
binary.pop(offset);
binary.pop(offset);
binary.pop(offset);
binary.pop(offset);
insertOpcodeLDI_destination(destination,offset,binary);
ih.frombytes(binary);
ih.write_hex_file(tmp);
# However the key features of the programmer are for erase, read, write,
# and verify functionality
# Here's how easy it is to erase the memory, and then verify that it's blank
print("Erasing the EEPROM...this may take 10s of seconds")
programmer.erase()
print("Erase Completed!")
print("Now performing a blank check...")
isBlank = programmer.blankCheck()
print("isBlank = {}".format(isBlank))
print("Reading the entire EEPROM")
data = programmer.read()
print("Creating a .bin and .hex file with the data read from the EEPROM")
ih.frombytes(data)
print("Min Addr: {}, Max Addr: {}".format(str(ih.minaddr()),
str(ih.maxaddr())))
print("Now saving the file to disk just to demo how easy it is")
ih.tofile("testFileErased-00.hex", format="hex")
ih.tofile("testFileErased-00.bin", format="bin")
# Reading / Writing / Verifying EEPROMs from bin or hex files is also very
# easy:
print("Manually modifying the data file")
dataFile = "testFile.bin"
ih[0] = 0xDE
ih[1] = 0xAD
ih[2] = 0xBE
ih[3] = 0xEF
def save(self, path):
h = IntelHex()
h.frombytes(bytes=self.payload, offset=self.base_addr)
h.tofile(path, 'hex')