def finish_deploy(task, address):
"""Notifies the ramdisk to reboot the node and makes the instance active.
This method notifies the ramdisk to proceed to reboot and then
makes the instance active.
:param task: a TaskManager object.
:param address: The IP address of the bare metal node.
:raises: InstanceDeployFailure, if notifying ramdisk failed.
"""
node = task.node
try:
deploy_utils.notify_ramdisk_to_proceed(address)
except Exception as e:
LOG.error(_LE('Deploy failed for instance %(instance)s. '
'Error: %(error)s'),
{'instance': node.instance_uuid, 'error': e})
msg = (_('Failed to notify ramdisk to reboot after bootloader '
'installation. Error: %s') % e)
deploy_utils.set_failed_state(task, msg)
raise exception.InstanceDeployFailure(msg)
# TODO(lucasagomes): When deploying a node with the DIB ramdisk
# Ironic will not power control the node at the end of the deployment,
# it's the DIB ramdisk that reboots the node. But, for the SSH driver
# some changes like setting the boot device only gets applied when the
# machine is powered off and on again. So the code below is enforcing
# it. For Liberty we need to change the DIB ramdisk so that Ironic
# always controls the power state of the node for all drivers.
if deploy_utils.get_boot_option(node) == "local" and 'ssh' in node.driver:
manager_utils.node_power_action(task, states.REBOOT)
LOG.info(_LI('Deployment to node %s done'), node.uuid)
task.process_event('done')
def finish_deploy(task, address):
"""Notifies the ramdisk to reboot the node and makes the instance active.
This method notifies the ramdisk to proceed to reboot and then
makes the instance active.
:param task: a TaskManager object.
:param address: The IP address of the bare metal node.
:raises: InstanceDeployFailure, if notifying ramdisk failed.
"""
node = task.node
try:
deploy_utils.notify_ramdisk_to_proceed(address)
except Exception as e:
LOG.error(
_LE("Deploy failed for instance %(instance)s. " "Error: %(error)s"),
{"instance": node.instance_uuid, "error": e},
)
msg = _("Failed to notify ramdisk to reboot after bootloader " "installation. Error: %s") % e
deploy_utils.set_failed_state(task, msg)
raise exception.InstanceDeployFailure(msg)
# TODO(lucasagomes): When deploying a node with the DIB ramdisk
# Ironic will not power control the node at the end of the deployment,
# it's the DIB ramdisk that reboots the node. But, for the SSH driver
# some changes like setting the boot device only gets applied when the
# machine is powered off and on again. So the code below is enforcing
# it. For Liberty we need to change the DIB ramdisk so that Ironic
# always controls the power state of the node for all drivers.
if deploy_utils.get_boot_option(node) == "local" and "ssh" in node.driver:
manager_utils.node_power_action(task, states.REBOOT)
LOG.info(_LI("Deployment to node %s done"), node.uuid)
task.process_event("done")
def pass_deploy_info(self, task, **kwargs):
"""Continues the iSCSI deployment from where ramdisk left off.
This method continues the iSCSI deployment from the conductor node
and writes the deploy image to the bare metal's disk. After that,
it does the following depending on boot_option for deploy:
- If the boot_option requested for this deploy is 'local', then it
sets the node to boot from disk (ramdisk installs the boot loader
present within the image to the bare metal's disk).
- If the boot_option requested is 'netboot' or no boot_option is
requested, it finds/creates the boot ISO to boot the instance
image, attaches the boot ISO to the bare metal and then sets
the node to boot from CDROM.
:param task: a TaskManager instance containing the node to act on.
:param kwargs: kwargs containing parameters for iSCSI deployment.
:raises: InvalidState
"""
node = task.node
task.process_event('resume')
iwdi = node.driver_internal_info.get('is_whole_disk_image')
ilo_common.cleanup_vmedia_boot(task)
uuid_dict = iscsi_deploy.continue_deploy(task, **kwargs)
root_uuid_or_disk_id = uuid_dict.get(
'root uuid', uuid_dict.get('disk identifier'))
try:
# Set boot mode
ilo_common.update_boot_mode(task)
# Need to enable secure boot, if being requested
_update_secure_boot_mode(task, True)
# For iscsi_ilo driver, we boot from disk every time if the image
# deployed is a whole disk image.
if iscsi_deploy.get_boot_option(node) == "local" or iwdi:
manager_utils.node_set_boot_device(task, boot_devices.DISK,
persistent=True)
# Ask the ramdisk to install bootloader and
# wait for the call-back through the vendor passthru
# 'pass_bootloader_install_info', if it's not a whole
# disk image.
if not iwdi:
deploy_utils.notify_ramdisk_to_proceed(kwargs['address'])
task.process_event('wait')
return
else:
self._configure_vmedia_boot(task, root_uuid_or_disk_id)
except Exception as e:
LOG.error(_LE('Deploy failed for instance %(instance)s. '
'Error: %(error)s'),
{'instance': node.instance_uuid, 'error': e})
msg = _('Failed to continue iSCSI deployment.')
deploy_utils.set_failed_state(task, msg)
else:
iscsi_deploy.finish_deploy(task, kwargs.get('address'))
def pass_deploy_info(self, task, **kwargs):
"""Continues the deployment of baremetal node over iSCSI.
This method continues the deployment of the baremetal node over iSCSI
from where the deployment ramdisk has left off.
:param task: a TaskManager instance containing the node to act on.
:param kwargs: kwargs for performing iscsi deployment.
:raises: InvalidState
"""
node = task.node
task.process_event('resume')
_destroy_token_file(node)
is_whole_disk_image = node.driver_internal_info['is_whole_disk_image']
uuid_dict = iscsi_deploy.continue_deploy(task, **kwargs)
root_uuid_or_disk_id = uuid_dict.get(
'root uuid', uuid_dict.get('disk identifier'))
# save the node's root disk UUID so that another conductor could
# rebuild the PXE config file. Due to a shortcoming in Nova objects,
# we have to assign to node.driver_internal_info so the node knows it
# has changed.
driver_internal_info = node.driver_internal_info
driver_internal_info['root_uuid_or_disk_id'] = root_uuid_or_disk_id
node.driver_internal_info = driver_internal_info
node.save()
try:
if iscsi_deploy.get_boot_option(node) == "local":
deploy_utils.try_set_boot_device(task, boot_devices.DISK)
# If it's going to boot from the local disk, get rid of
# the PXE configuration files used for the deployment
pxe_utils.clean_up_pxe_config(task)
# Ask the ramdisk to install bootloader and
# wait for the call-back through the vendor passthru
# 'pass_bootloader_install_info', if it's not a
# whole disk image.
if not is_whole_disk_image:
deploy_utils.notify_ramdisk_to_proceed(kwargs['address'])
task.process_event('wait')
return
else:
pxe_config_path = pxe_utils.get_pxe_config_file_path(node.uuid)
boot_mode = deploy_utils.get_boot_mode_for_deploy(node)
deploy_utils.switch_pxe_config(pxe_config_path,
root_uuid_or_disk_id,
boot_mode, is_whole_disk_image)
except Exception as e:
LOG.error(_LE('Deploy failed for instance %(instance)s. '
'Error: %(error)s'),
{'instance': node.instance_uuid, 'error': e})
msg = _('Failed to continue iSCSI deployment.')
deploy_utils.set_failed_state(task, msg)
else:
iscsi_deploy.finish_deploy(task, kwargs.get('address'))
def pass_deploy_info(self, task, **kwargs):
"""Continues the deployment of baremetal node over iSCSI.
This method continues the deployment of the baremetal node over iSCSI
from where the deployment ramdisk has left off.
:param task: a TaskManager instance containing the node to act on.
:param kwargs: kwargs for performing iscsi deployment.
:raises: InvalidState
"""
node = task.node
LOG.warning(_LW("The node %s is using the bash deploy ramdisk for "
"its deployment. This deploy ramdisk has been "
"deprecated. Please use the ironic-python-agent "
"(IPA) ramdisk instead."), node.uuid)
# TODO(rameshg87): Remove the below code once we stop supporting
# bash ramdisk in Ironic.
if node.provision_state == states.CLEANWAIT:
return self._initiate_cleaning(task)
task.process_event('resume')
LOG.debug('Continuing the deployment on node %s', node.uuid)
is_whole_disk_image = node.driver_internal_info['is_whole_disk_image']
uuid_dict_returned = continue_deploy(task, **kwargs)
root_uuid_or_disk_id = uuid_dict_returned.get(
'root uuid', uuid_dict_returned.get('disk identifier'))
# save the node's root disk UUID so that another conductor could
# rebuild the PXE config file. Due to a shortcoming in Nova objects,
# we have to assign to node.driver_internal_info so the node knows it
# has changed.
driver_internal_info = node.driver_internal_info
driver_internal_info['root_uuid_or_disk_id'] = root_uuid_or_disk_id
node.driver_internal_info = driver_internal_info
node.save()
try:
task.driver.boot.prepare_instance(task)
if deploy_utils.get_boot_option(node) == "local":
if not is_whole_disk_image:
LOG.debug('Installing the bootloader on node %s',
node.uuid)
deploy_utils.notify_ramdisk_to_proceed(kwargs['address'])
task.process_event('wait')
return
except Exception as e:
LOG.error(_LE('Deploy failed for instance %(instance)s. '
'Error: %(error)s'),
{'instance': node.instance_uuid, 'error': e})
msg = _('Failed to continue iSCSI deployment.')
deploy_utils.set_failed_state(task, msg)
else:
finish_deploy(task, kwargs.get('address'))
def pass_deploy_info(self, task, **kwargs):
"""Continues the deployment of baremetal node over iSCSI.
This method continues the deployment of the baremetal node over iSCSI
from where the deployment ramdisk has left off.
:param task: a TaskManager instance containing the node to act on.
:param kwargs: kwargs for performing iscsi deployment.
:raises: InvalidState
"""
node = task.node
LOG.warning(_LW("The node %s is using the bash deploy ramdisk for "
"its deployment. This deploy ramdisk has been "
"deprecated. Please use the ironic-python-agent "
"(IPA) ramdisk instead."), node.uuid)
# TODO(rameshg87): Remove the below code once we stop supporting
# bash ramdisk in Ironic.
if node.provision_state == states.CLEANWAIT:
return self._initiate_cleaning(task)
task.process_event('resume')
LOG.debug('Continuing the deployment on node %s', node.uuid)
is_whole_disk_image = node.driver_internal_info['is_whole_disk_image']
uuid_dict_returned = continue_deploy(task, **kwargs)
root_uuid_or_disk_id = uuid_dict_returned.get(
'root uuid', uuid_dict_returned.get('disk identifier'))
# save the node's root disk UUID so that another conductor could
# rebuild the PXE config file. Due to a shortcoming in Nova objects,
# we have to assign to node.driver_internal_info so the node knows it
# has changed.
driver_internal_info = node.driver_internal_info
driver_internal_info['root_uuid_or_disk_id'] = root_uuid_or_disk_id
node.driver_internal_info = driver_internal_info
node.save()
try:
task.driver.boot.prepare_instance(task)
if deploy_utils.get_boot_option(node) == "local":
if not is_whole_disk_image:
LOG.debug('Installing the bootloader on node %s',
node.uuid)
deploy_utils.notify_ramdisk_to_proceed(kwargs['address'])
task.process_event('wait')
return
except Exception as e:
LOG.error(_LE('Deploy failed for instance %(instance)s. '
'Error: %(error)s'),
{'instance': node.instance_uuid, 'error': e})
msg = _('Failed to continue iSCSI deployment.')
deploy_utils.set_failed_state(task, msg)
else:
finish_deploy(task, kwargs.get('address'))
def pass_deploy_info(self, task, **kwargs):
"""Continues the deployment of baremetal node over iSCSI.
This method continues the deployment of the baremetal node over iSCSI
from where the deployment ramdisk has left off.
:param task: a TaskManager instance containing the node to act on.
:param kwargs: kwargs for performing iscsi deployment.
:raises: InvalidState
"""
node = task.node
LOG.warning(
_LW(
"The node %s is using the bash deploy ramdisk for "
"its deployment. This deploy ramdisk has been "
"deprecated. Please use the ironic-python-agent "
"(IPA) ramdisk instead."
),
node.uuid,
)
task.process_event("resume")
LOG.debug("Continuing the deployment on node %s", node.uuid)
is_whole_disk_image = node.driver_internal_info["is_whole_disk_image"]
uuid_dict_returned = continue_deploy(task, **kwargs)
root_uuid_or_disk_id = uuid_dict_returned.get("root uuid", uuid_dict_returned.get("disk identifier"))
# save the node's root disk UUID so that another conductor could
# rebuild the PXE config file. Due to a shortcoming in Nova objects,
# we have to assign to node.driver_internal_info so the node knows it
# has changed.
driver_internal_info = node.driver_internal_info
driver_internal_info["root_uuid_or_disk_id"] = root_uuid_or_disk_id
node.driver_internal_info = driver_internal_info
node.save()
try:
task.driver.boot.prepare_instance(task)
if deploy_utils.get_boot_option(node) == "local":
if not is_whole_disk_image:
LOG.debug("Installing the bootloader on node %s", node.uuid)
deploy_utils.notify_ramdisk_to_proceed(kwargs["address"])
task.process_event("wait")
return
except Exception as e:
LOG.error(
_LE("Deploy failed for instance %(instance)s. " "Error: %(error)s"),
{"instance": node.instance_uuid, "error": e},
)
msg = _("Failed to continue iSCSI deployment.")
deploy_utils.set_failed_state(task, msg)
else:
finish_deploy(task, kwargs.get("address"))
def pass_deploy_info(self, task, **kwargs):
"""Continues the deployment of baremetal node over iSCSI.
This method continues the deployment of the baremetal node over iSCSI
from where the deployment ramdisk has left off.
:param task: a TaskManager instance containing the node to act on.
:param kwargs: kwargs for performing iscsi deployment.
:raises: InvalidState
"""
node = task.node
task.process_event('resume')
LOG.debug('Continuing the deployment on node %s', node.uuid)
is_whole_disk_image = node.driver_internal_info['is_whole_disk_image']
uuid_dict_returned = continue_deploy(task, **kwargs)
root_uuid_or_disk_id = uuid_dict_returned.get(
'root uuid', uuid_dict_returned.get('disk identifier'))
# save the node's root disk UUID so that another conductor could
# rebuild the PXE config file. Due to a shortcoming in Nova objects,
# we have to assign to node.driver_internal_info so the node knows it
# has changed.
driver_internal_info = node.driver_internal_info
driver_internal_info['root_uuid_or_disk_id'] = root_uuid_or_disk_id
node.driver_internal_info = driver_internal_info
node.save()
try:
if deploy_utils.get_boot_option(node) == "local":
deploy_utils.try_set_boot_device(task, boot_devices.DISK)
if not is_whole_disk_image:
LOG.debug('Installing the bootloader on node %s',
node.uuid)
deploy_utils.notify_ramdisk_to_proceed(kwargs['address'])
task.process_event('wait')
return
task.driver.boot.prepare_instance(task)
except Exception as e:
LOG.error(_LE('Deploy failed for instance %(instance)s. '
'Error: %(error)s'),
{'instance': node.instance_uuid, 'error': e})
msg = _('Failed to continue iSCSI deployment.')
deploy_utils.set_failed_state(task, msg)
else:
finish_deploy(task, kwargs.get('address'))
def pass_deploy_info(self, task, **kwargs):
"""Continues the iSCSI deployment from where ramdisk left off.
This method continues the iSCSI deployment from the conductor node
and writes the deploy image to the bare metal's disk. After that,
it does the following depending on boot_option for deploy:
- If the boot_option requested for this deploy is 'local', then it
sets the node to boot from disk (ramdisk installs the boot loader
present within the image to the bare metal's disk).
- If the boot_option requested is 'netboot' or no boot_option is
requested, it finds/creates the boot ISO to boot the instance
image, attaches the boot ISO to the bare metal and then sets
the node to boot from CDROM.
:param task: a TaskManager instance containing the node to act on.
:param kwargs: kwargs containing parameters for iSCSI deployment.
:raises: InvalidState
"""
node = task.node
task.process_event('resume')
iwdi = node.driver_internal_info.get('is_whole_disk_image')
ilo_common.cleanup_vmedia_boot(task)
uuid_dict = iscsi_deploy.continue_deploy(task, **kwargs)
root_uuid_or_disk_id = uuid_dict.get('root uuid',
uuid_dict.get('disk identifier'))
try:
# Set boot mode
ilo_common.update_boot_mode(task)
# Need to enable secure boot, if being requested
_update_secure_boot_mode(task, True)
# For iscsi_ilo driver, we boot from disk every time if the image
# deployed is a whole disk image.
if iscsi_deploy.get_boot_option(node) == "local" or iwdi:
manager_utils.node_set_boot_device(task,
boot_devices.DISK,
persistent=True)
# Ask the ramdisk to install bootloader and
# wait for the call-back through the vendor passthru
# 'pass_bootloader_install_info', if it's not a whole
# disk image.
if not iwdi:
deploy_utils.notify_ramdisk_to_proceed(kwargs['address'])
task.process_event('wait')
return
else:
self._configure_vmedia_boot(task, root_uuid_or_disk_id)
except Exception as e:
LOG.error(
_LE('Deploy failed for instance %(instance)s. '
'Error: %(error)s'), {
'instance': node.instance_uuid,
'error': e
})
msg = _('Failed to continue iSCSI deployment.')
deploy_utils.set_failed_state(task, msg)
else:
iscsi_deploy.finish_deploy(task, kwargs.get('address'))
def pass_deploy_info(self, task, **kwargs):
"""Continues the iSCSI deployment from where ramdisk left off.
This method continues the iSCSI deployment from the conductor node
and writes the deploy image to the bare metal's disk. After that,
it does the following depending on boot_option for deploy:
- If the boot_option requested for this deploy is 'local', then it
sets the node to boot from disk (ramdisk installs the boot loader
present within the image to the bare metal's disk).
- If the boot_option requested is 'netboot' or no boot_option is
requested, it finds/creates the boot ISO to boot the instance
image, attaches the boot ISO to the bare metal and then sets
the node to boot from CDROM.
:param task: a TaskManager instance containing the node to act on.
:param kwargs: kwargs containing parameters for iSCSI deployment.
:raises: InvalidState
"""
node = task.node
LOG.warning(_LW("The node %s is using the bash deploy ramdisk for "
"its deployment. This deploy ramdisk has been "
"deprecated. Please use the ironic-python-agent "
"(IPA) ramdisk instead."), node.uuid)
task.process_event('resume')
LOG.debug('Continuing iSCSI virtual media deployment on node %s',
node.uuid)
is_whole_disk_image = node.driver_internal_info.get(
'is_whole_disk_image')
uuid_dict = iscsi_deploy.continue_deploy(task, **kwargs)
root_uuid_or_disk_id = uuid_dict.get(
'root uuid', uuid_dict.get('disk identifier'))
try:
_cleanup_vmedia_boot(task)
if (deploy_utils.get_boot_option(node) == "local" or
is_whole_disk_image):
manager_utils.node_set_boot_device(task, boot_devices.DISK,
persistent=True)
# Ask the ramdisk to install bootloader and
# wait for the call-back through the vendor passthru
# 'pass_bootloader_install_info', if it's not a whole
# disk image.
if not is_whole_disk_image:
deploy_utils.notify_ramdisk_to_proceed(kwargs['address'])
task.process_event('wait')
return
else:
self._configure_vmedia_boot(task, root_uuid_or_disk_id)
except Exception as e:
LOG.exception(_LE('Deploy failed for instance %(instance)s. '
'Error: %(error)s'),
{'instance': node.instance_uuid, 'error': e})
msg = _('Failed to continue iSCSI deployment.')
deploy_utils.set_failed_state(task, msg)
else:
iscsi_deploy.finish_deploy(task, kwargs.get('address'))
def pass_deploy_info(self, task, **kwargs):
"""Continues the deployment of baremetal node over iSCSI.
This method continues the deployment of the baremetal node over iSCSI
from where the deployment ramdisk has left off.
:param task: a TaskManager instance containing the node to act on.
:param kwargs: kwargs for performing iscsi deployment.
:raises: InvalidState
"""
node = task.node
task.process_event('resume')
LOG.debug('Continuing the deployment on node %s', node.uuid)
_destroy_token_file(node)
is_whole_disk_image = node.driver_internal_info['is_whole_disk_image']
uuid_dict = iscsi_deploy.continue_deploy(task, **kwargs)
root_uuid_or_disk_id = uuid_dict.get('root uuid',
uuid_dict.get('disk identifier'))
# save the node's root disk UUID so that another conductor could
# rebuild the PXE config file. Due to a shortcoming in Nova objects,
# we have to assign to node.driver_internal_info so the node knows it
# has changed.
driver_internal_info = node.driver_internal_info
driver_internal_info['root_uuid_or_disk_id'] = root_uuid_or_disk_id
node.driver_internal_info = driver_internal_info
node.save()
try:
if iscsi_deploy.get_boot_option(node) == "local":
deploy_utils.try_set_boot_device(task, boot_devices.DISK)
# If it's going to boot from the local disk, get rid of
# the PXE configuration files used for the deployment
pxe_utils.clean_up_pxe_config(task)
# Ask the ramdisk to install bootloader and
# wait for the call-back through the vendor passthru
# 'pass_bootloader_install_info', if it's not a
# whole disk image.
if not is_whole_disk_image:
LOG.debug('Installing the bootloader on node %s',
node.uuid)
deploy_utils.notify_ramdisk_to_proceed(kwargs['address'])
task.process_event('wait')
return
else:
pxe_config_path = pxe_utils.get_pxe_config_file_path(node.uuid)
boot_mode = deploy_utils.get_boot_mode_for_deploy(node)
deploy_utils.switch_pxe_config(pxe_config_path,
root_uuid_or_disk_id, boot_mode,
is_whole_disk_image)
except Exception as e:
LOG.error(
_LE('Deploy failed for instance %(instance)s. '
'Error: %(error)s'), {
'instance': node.instance_uuid,
'error': e
})
msg = _('Failed to continue iSCSI deployment.')
deploy_utils.set_failed_state(task, msg)
else:
iscsi_deploy.finish_deploy(task, kwargs.get('address'))
