def test_attach(self):
self.ncclient.command.side_effect = [
# run attach commands
FakeNcClientResponse(fixtures.ok())
]
port = base_driver.PortInfo(switch_host='switch1.host.com',
switch_username='******',
switch_password='******',
interface='eth1/1',
hardware_id='hardware1',
vlan_id=1,
ip='10.0.0.2',
mac_address='ff:ff:ff:ff:ff:ff',
trunked=True)
eventlet.spawn(self.driver.attach, port).wait()
self.assertEqual(self.ncclient.command.call_count, 2)
attach_cmd = self._get_called_commands(0)
save_cmd = self._get_called_commands(1)
attach_expected = [
'configure terminal', 'interface port-channel 1',
'switchport trunk allowed vlan add 1', 'configure terminal',
('ip source binding 10.0.0.2 ff:ff:ff:ff:ff:ff '
'vlan 1 interface port-channel1')
]
save_expected = ['copy running-config startup-config']
self.assertEqual(attach_cmd, attach_expected)
self.assertEqual(save_cmd, save_expected)
def test_running_config_trunked(self):
self.ncclient.command.side_effect = [
FakeNcClientResponse(fixtures.show_dhcp(1)),
FakeNcClientResponse(fixtures.show_ethernet_config_trunked(1)),
FakeNcClientResponse(fixtures.show_port_channel_config_trunked(1))
]
port = base_driver.PortInfo(switch_host='switch1.host.com',
switch_username='******',
switch_password='******',
interface='eth1/1',
hardware_id='hardware1',
vlan_id=1,
ip='10.0.0.2',
mac_address='ff:ff:ff:ff:ff:ff',
trunked=True)
res = self.driver.running_config(port)
expected_res = {
'switch': {
'interface': 'eth1/1',
'hostname': 'switch1.host.com'
},
'running-config': {
'dhcp': [('ip source binding 10.0.0.1 FFFF.FFFF.FFFF.FFFF '
'vlan 1 interface port-channel1')],
'port-channel':
[('description '
'CUST39a8365c-3b84-4169-bc1a-1efa3ab20e04-host'),
'switchport mode trunk', 'switchport trunk allowed vlan 1,2',
'ip verify source dhcp-snooping-vlan',
'spanning-tree port type edge trunk', 'no negotiate auto',
'vpc 1'],
'ethernet': [('description '
'CUST39a8365c-3b84-4169-bc1a-1efa3ab20e04-host'),
'no lldp transmit', 'switchport mode trunk',
'switchport trunk allowed vlan 1,2',
'spanning-tree port type edge trunk',
'spanning-tree bpduguard enable',
'channel-group 1 mode active']
}
}
self.assertEqual(self.ncclient.command.call_count, 3)
self.assertEqual(res, expected_res)
def test_delete(self):
self.ncclient.command.side_effect = [
# list dhcp bindings to clear
FakeNcClientResponse(fixtures.show_dhcp(1)),
# run clear commands
FakeNcClientResponse(fixtures.ok())
]
port = base_driver.PortInfo(switch_host='switch1.host.com',
switch_username='******',
switch_password='******',
interface='eth1/1',
hardware_id='hardware1',
vlan_id=1,
ip='10.0.0.2',
mac_address='ff:ff:ff:ff:ff:ff',
trunked=True)
eventlet.spawn(self.driver.delete, port).wait()
self.assertEqual(self.ncclient.command.call_count, 3)
remove_bindings_cmd = self._get_called_commands(0)
clear_port_cmd = self._get_called_commands(1)
save_cmd = self._get_called_commands(2)
remove_bindings_expected = ['show running dhcp | egrep port-channel1$']
clear_port_expected = [
'configure terminal', 'interface port-channel 1',
('no ip source binding 10.0.0.1 FFFF.FFFF.FFFF.FFFF '
'vlan 1 interface port-channel1'), 'configure terminal',
'interface port-channel 1',
'no ip verify source dhcp-snooping-vlan',
'no interface port-channel 1', 'configure terminal',
'default interface ethernet 1/1', 'configure terminal',
'interface ethernet 1/1', 'shutdown'
]
save_expected = ['copy running-config startup-config']
self.assertEqual(remove_bindings_cmd, remove_bindings_expected)
self.assertEqual(clear_port_cmd, clear_port_expected)
self.assertEqual(save_cmd, save_expected)
def _make_port_info(self,
switch_port,
neutron_port=None,
neutron_network=None):
info = base_driver.PortInfo(
switch_host=switch_port.switch.host,
switch_username=switch_port.switch.username,
switch_password=switch_port.switch.password,
interface=switch_port["port"])
if neutron_port:
info.hardware_id = neutron_port["switch:hardware_id"]
info.ip = self._get_ip(neutron_port)
info.mac_address = neutron_port["mac_address"]
info.trunked = neutron_port["trunked"]
if neutron_network:
info.vlan_id = neutron_network["provider:segmentation_id"]
return info
def test_interface_status(self):
self.ncclient.command.side_effect = [
FakeNcClientResponse(fixtures.show_ethernet_status(1)),
FakeNcClientResponse(fixtures.show_port_channel_status(1))
]
port = base_driver.PortInfo(switch_host='switch1.host.com',
switch_username='******',
switch_password='******',
interface='eth1/1',
hardware_id='hardware1',
vlan_id=1,
ip='10.0.0.2',
mac_address='ff:ff:ff:ff:ff:ff',
trunked=True)
res = self.driver.interface_status(port)
expected_res = {
'switch': {
'interface': 'eth1/1',
'hostname': 'switch1.host.com'
},
'interface-status': {
'ethernet': {
'interface': 'ethernet1/1',
'state': 'up'
},
'port-channel': {
'interface': 'port-channel1',
'state': 'up',
'vpc_status': 'vPC Status: Up, vPC number: 1'
}
}
}
self.assertEqual(self.ncclient.command.call_count, 2)
self.assertEqual(res, expected_res)
def add_vlan(port, driver):
driver.attach(port)
def remove_vlan(port, driver):
driver.detach(port)
def show(port, driver):
driver.show(port)
def clear(port, driver):
driver.clear(port)
d = cisco_driver.CiscoDriver(dry_run=True)
p = base.PortInfo(switch_host='host',
switch_username='******',
switch_password='******',
hardware_id='hardware_id',
interface='Eth1/20',
vlan_id='101',
ip='10.0.0.1',
mac_address='aa:bb:cc:dd:ee',
trunked=True)
clear(p, d)
def test_create(self):
self.ncclient.command.side_effect = [
# list dhcp bindings to clear
FakeNcClientResponse(fixtures.show_dhcp(1)),
# run clear commands
FakeNcClientResponse(fixtures.ok()),
# run create commands
FakeNcClientResponse(fixtures.ok())
]
port = base_driver.PortInfo(switch_host='switch1.host.com',
switch_username='******',
switch_password='******',
interface='eth1/1',
hardware_id='hardware1',
vlan_id=1,
ip='10.0.0.2',
mac_address='ff:ff:ff:ff:ff:ff',
trunked=True)
eventlet.spawn(self.driver.create, port).wait()
self.assertEqual(self.ncclient.command.call_count, 4)
remove_bindings_cmd = self._get_called_commands(0)
clear_port_cmd = self._get_called_commands(1)
create_port_cmd = self._get_called_commands(2)
save_cmd = self._get_called_commands(3)
remove_bindings_expected = ['show running dhcp | egrep port-channel1$']
clear_port_expected = [
'configure terminal', 'interface port-channel 1',
('no ip source binding 10.0.0.1 FFFF.FFFF.FFFF.FFFF '
'vlan 1 interface port-channel1'), 'configure terminal',
'interface port-channel 1',
'no ip verify source dhcp-snooping-vlan',
'no interface port-channel 1', 'configure terminal',
'default interface ethernet 1/1', 'configure terminal',
'interface ethernet 1/1', 'shutdown'
]
create_port_expected = [
'configure terminal', 'interface port-channel 1',
'description CUSThardware1-host', 'switchport mode trunk',
'switchport trunk allowed vlan 1',
'spanning-tree port type edge trunk', 'vpc 1',
'ip verify source dhcp-snooping-vlan', 'no shutdown',
'configure terminal',
('ip source binding 10.0.0.2 ff:ff:ff:ff:ff:ff '
'vlan 1 interface port-channel1'), 'configure terminal',
'interface ethernet 1/1', 'description CUSThardware1-host',
'switchport mode trunk', 'switchport trunk allowed vlan 1',
'spanning-tree port type edge trunk',
'spanning-tree bpduguard enable', 'channel-group 1 mode active',
'no lldp transmit', 'no cdp enable', 'no shutdown'
]
save_expected = ['copy running-config startup-config']
self.assertEqual(remove_bindings_cmd, remove_bindings_expected)
self.assertEqual(clear_port_cmd, clear_port_expected)
self.assertEqual(create_port_cmd, create_port_expected)
self.assertEqual(save_cmd, save_expected)