def validates_staticroute(obj):
checker = Checker()
check = True
_ = obj._
checker.errors = []
if not is_param(obj.input, 'target'):
check = False
checker.add_error(_('Specify target address for the route.'))
else:
check = checker.check_ipaddr(
_('Target'),
obj.input.target,
CHECK_EMPTY | CHECK_VALID,
) and check
if not is_param(obj.input, 'gateway'):
check = False
checker.add_error(_('Specify gateway address for the route.'))
else:
check = checker.check_ipaddr(
_('Gateway'),
obj.input.gateway,
CHECK_VALID,
) and check
obj.view.alert = checker.errors
return check
def validates_cpu(obj):
checker = Checker()
check = True
_ = obj._
checker.errors = []
if is_param(obj.input, 'max_vcpus'):
check = checker.check_number(
_('Maximum Allocatable Virtual CPUs'),
obj.input.max_vcpus,
CHECK_EMPTY | CHECK_VALID | CHECK_MIN,
min = VCPUS_MIN_SIZE,
) and check
else:
check = False
checker.add_error(_('"%s" is required.') % _('Maximum Allocatable Virtual CPUs'))
if is_param(obj.input, 'vcpus'):
check = checker.check_number(
_("Number of Virtual CPUs to Allocate"),
obj.input.vcpus,
CHECK_EMPTY | CHECK_VALID | CHECK_MIN,
min = VCPUS_MIN_SIZE,
) and check;
obj.view.alert = checker.errors
return check
def validates_cpu(obj):
checker = Checker()
check = True
_ = obj._
checker.errors = []
if is_param(obj.input, 'max_vcpus'):
check = checker.check_number(
_('Maximum Allocatable Virtual CPUs'),
obj.input.max_vcpus,
CHECK_EMPTY | CHECK_VALID | CHECK_MIN,
min=VCPUS_MIN_SIZE,
) and check
else:
check = False
checker.add_error(
_('"%s" is required.') % _('Maximum Allocatable Virtual CPUs'))
if is_param(obj.input, 'vcpus'):
check = checker.check_number(
_("Number of Virtual CPUs to Allocate"),
obj.input.vcpus,
CHECK_EMPTY | CHECK_VALID | CHECK_MIN,
min=VCPUS_MIN_SIZE,
) and check
obj.view.alert = checker.errors
return check
def validates_mail(obj):
checker = Checker()
check = True
_ = obj._
checker.errors = []
if not is_param(obj.input, 'hostname'):
check = False
checker.add_error(_('"%s" is required.') % _('Server Name'))
else:
check_server = checker.check_domainname(_('Server Name'),
obj.input.hostname,
CHECK_VALID,
) or \
checker.check_ipaddr(_('Server Name'),
obj.input.hostname,
CHECK_VALID,
)
check = check_server and check
if not is_param(obj.input, 'port'):
check = False
checker.add_error(_('"%s" is required.') % _('Port Number'))
else:
check = checker.check_number(_('Port Number'),
obj.input.port,
CHECK_VALID | CHECK_MIN | CHECK_MAX,
PORT_MIN_NUMBER,
PORT_MAX_NUMBER,
) and check
obj.view.alert = checker.errors
return check
def validates_uriguest_status(obj):
checker = Checker()
check = True
_ = obj._
checker.errors = []
if is_param(obj.input, "status"):
check = (
checker.check_status(
_("Status"),
obj.input.status,
CHECK_EMPTY | CHECK_VALID,
[
GUEST_ACTION_CREATE,
GUEST_ACTION_SHUTDOWN,
GUEST_ACTION_DESTROY,
GUEST_ACTION_SUSPEND,
GUEST_ACTION_RESUME,
GUEST_ACTION_REBOOT,
GUEST_ACTION_ENABLE_AUTOSTART,
GUEST_ACTION_DISABLE_AUTOSTART,
],
)
and check
)
else:
check = False
checker.add_error(_('"%s" is required.') % _("Status"))
obj.view.alert = checker.errors
return check
def validates_uriguest_status(obj):
checker = Checker()
check = True
_ = obj._
checker.errors = []
if is_param(obj.input, 'status'):
check = checker.check_status(
_('Status'),
obj.input.status,
CHECK_EMPTY | CHECK_VALID,
[GUEST_ACTION_CREATE,
GUEST_ACTION_SHUTDOWN,
GUEST_ACTION_DESTROY,
GUEST_ACTION_SUSPEND,
GUEST_ACTION_RESUME,
GUEST_ACTION_REBOOT,
GUEST_ACTION_ENABLE_AUTOSTART,
GUEST_ACTION_DISABLE_AUTOSTART]
) and check
else:
check = False
checker.add_error(_('"%s" is required.') % _('Status'))
obj.view.alert = checker.errors
return check
def validates_mail(obj):
checker = Checker()
check = True
_ = obj._
checker.errors = []
if not is_param(obj.input, 'hostname'):
check = False
checker.add_error(_('"%s" is required.') % _('Server Name'))
else:
check_server = checker.check_domainname(_('Server Name'),
obj.input.hostname,
CHECK_VALID,
) or \
checker.check_ipaddr(_('Server Name'),
obj.input.hostname,
CHECK_VALID,
)
check = check_server and check
if not is_param(obj.input, 'port'):
check = False
checker.add_error(_('"%s" is required.') % _('Port Number'))
else:
check = checker.check_number(
_('Port Number'),
obj.input.port,
CHECK_VALID | CHECK_MIN | CHECK_MAX,
PORT_MIN_NUMBER,
PORT_MAX_NUMBER,
) and check
obj.view.alert = checker.errors
return check
def validates_src_id(obj):
"""<comment-ja>
ゲストOSコピー元のチェッカー
@param obj: karesansui.lib.rest.Rest オブジェクト
@type obj: karesansui.lib.rest.Rest
@return: check
@rtype: bool
</comment-ja>
<comment-en>
TODO: English Comment
</comment-en>
"""
checker = Checker()
check = True
_ = obj._
checker.errors = []
if not is_param(obj.input, 'src_id'):
check = False
checker.add_error(_('"%s" is required.') % _('Copy Source'))
else:
check = checker.check_number(_('Copy Source'),
obj.input.src_id,
CHECK_EMPTY | CHECK_VALID | CHECK_MIN | CHECK_MAX,
ID_MIN_LENGTH,
ID_MAX_LENGTH
) and check
obj.view.alert = checker.errors
return check
def validates_staticroute(obj):
checker = Checker()
check = True
_ = obj._
checker.errors = []
if not is_param(obj.input, 'target'):
check = False
checker.add_error(_('Specify target address for the route.'))
else:
check = checker.check_ipaddr(
_('Target'),
obj.input.target,
CHECK_EMPTY | CHECK_VALID,
) and check
if not is_param(obj.input, 'gateway'):
check = False
checker.add_error(_('Specify gateway address for the route.'))
else:
check = checker.check_ipaddr(
_('Gateway'),
obj.input.gateway,
CHECK_VALID,
) and check
obj.view.alert = checker.errors
return check
def validates_iptables_save(obj, host):
checker = Checker()
check = True
_ = obj._
checker.errors = []
if not is_param(obj.input, 'iptables_save'):
check = False
checker.add_error(_('"%s" is required.') % _('Rule'))
else:
check = checker.check_string(
_('Rule'),
obj.input.iptables_save,
CHECK_EMPTY | CHECK_VALID,
'[^-a-zA-Z0-9_\,\.\@\$\%\!\#\*\[\]\:\/\r\n\+ ]+',
None,
None,
) and check
if check is True:
ret = iptables_lint_contents(obj.input.iptables_save, obj, host)
if str(ret) != "":
check = False
checker.add_error(ret)
"""
m = re.match(".* line (?P<line>[0-9]+).*",str(ret))
if m:
checker.add_error("LINE:"+m.group("line"))
"""
obj.view.alert = checker.errors
return check
def validates_guest_edit(obj):
checker = Checker()
check = True
_ = obj._
checker.errors = []
if not is_param(obj.input, 'm_name'):
check = False
checker.add_error(_('Parameter m_name does not exist.'))
else:
check = checker.check_string(
_('Machine Name'),
obj.input.m_name,
CHECK_EMPTY | CHECK_LENGTH | CHECK_ONLYSPACE,
None,
min = MACHINE_NAME_MIN_LENGTH,
max = MACHINE_NAME_MAX_LENGTH,
) and check
if is_param(obj.input, 'note_title'):
check = checker.check_string(
_('Title'),
obj.input.note_title,
CHECK_LENGTH | CHECK_ONLYSPACE,
None,
min = NOTE_TITLE_MIN_LENGTH,
max = NOTE_TITLE_MAX_LENGTH,
) and check
if is_param(obj.input, 'note_value'):
check = checker.check_string(
_('Note'),
obj.input.note_value,
CHECK_ONLYSPACE,
None,
None,
None,
) and check
if is_param(obj.input, 'tags'):
for tag in comma_split(obj.input.tags):
check = checker.check_string(
_('Tag'),
tag,
CHECK_LENGTH | CHECK_ONLYSPACE,
None,
min = TAG_MIN_LENGTH,
max = TAG_MAX_LENGTH,
) and check
obj.view.alert = checker.errors
return check
def validates_guest_edit(obj):
checker = Checker()
check = True
_ = obj._
checker.errors = []
if not is_param(obj.input, 'm_name'):
check = False
checker.add_error(_('Parameter m_name does not exist.'))
else:
check = checker.check_string(
_('Machine Name'),
obj.input.m_name,
CHECK_EMPTY | CHECK_LENGTH | CHECK_ONLYSPACE,
None,
min=MACHINE_NAME_MIN_LENGTH,
max=MACHINE_NAME_MAX_LENGTH,
) and check
if is_param(obj.input, 'note_title'):
check = checker.check_string(
_('Title'),
obj.input.note_title,
CHECK_LENGTH | CHECK_ONLYSPACE,
None,
min=NOTE_TITLE_MIN_LENGTH,
max=NOTE_TITLE_MAX_LENGTH,
) and check
if is_param(obj.input, 'note_value'):
check = checker.check_string(
_('Note'),
obj.input.note_value,
CHECK_ONLYSPACE,
None,
None,
None,
) and check
if is_param(obj.input, 'tags'):
for tag in comma_split(obj.input.tags):
check = checker.check_string(
_('Tag'),
tag,
CHECK_LENGTH | CHECK_ONLYSPACE,
None,
min=TAG_MIN_LENGTH,
max=TAG_MAX_LENGTH,
) and check
obj.view.alert = checker.errors
return check
def compare_password(obj, user):
checker = Checker()
check = True
_ = obj._
checker.errors = []
if not sha1compare(user.password, obj.input.password, user.salt):
check = False
checker.add_error(_('%s is mismatched.') % _('Current Password'))
obj.view.alert = checker.errors
return check
def compare_password(obj, user):
checker = Checker()
check = True
_ = obj._
checker.errors = []
if not sha1compare(user.password, obj.input.password, user.salt):
check = False
checker.add_error(_('%s is mismatched.') % _('Current Password'))
obj.view.alert = checker.errors
return check
def validates_user(obj):
checker = Checker()
check = True
_ = obj._
checker.errors = []
if not is_param(obj.input, 'nickname'):
check = False
checker.add_error(_('"%s" is required.') % _('Nickname'))
else:
check = checker.check_username(
_('Nickname'),
obj.input.nickname,
CHECK_EMPTY | CHECK_LENGTH | CHECK_ONLYSPACE,
min = USER_MIN_LENGTH,
max = USER_MAX_LENGTH,
) and check
if not is_param(obj.input, 'email'):
check = False
checker.add_error(_('"%s" is required.') % _('Mail Address'))
else:
check = checker.check_mailaddress(
_('Mail Address'),
obj.input.email,
CHECK_EMPTY | CHECK_LENGTH | CHECK_VALID,
min = EMAIL_MIN_LENGTH,
max = EMAIL_MAX_LENGTH,
) and check
_password_flag = True
if not is_param(obj.input, 'new_password'):
_password_flag = False
checker.add_error(_('"%s" is required.') % _('New Password'))
if not is_param(obj.input, 'retype'):
check = False
_password_flag = False
checker.add_error(_('"%s" is required.') % _('Retype'))
if _password_flag == True:
check = checker.check_password(
_('Password'),
obj.input.new_password,
obj.input.retype,
CHECK_VALID | CHECK_LENGTH | CHECK_EMPTY,
min = PASSWORD_MIN_LENGTH,
max = PASSWORD_MAX_LENGTH,
) and check
check = checker.check_languages(
_('Language'),
obj.input.languages,
CHECK_EMPTY | CHECK_VALID | CHECK_LENGTH,
min = LANGUAGES_MIN_LENGTH,
max = LANGUAGES_MAX_LENGTH,
) and check
obj.view.alert = checker.errors
return check
def validates_user(obj):
checker = Checker()
check = True
_ = obj._
checker.errors = []
if not is_param(obj.input, 'nickname'):
check = False
checker.add_error(_('"%s" is required.') % _('Nickname'))
else:
check = checker.check_username(
_('Nickname'),
obj.input.nickname,
CHECK_EMPTY | CHECK_LENGTH | CHECK_ONLYSPACE,
min = USER_MIN_LENGTH,
max = USER_MAX_LENGTH,
) and check
if not is_param(obj.input, 'email'):
check = False
checker.add_error(_('"%s" is required.') % _('Mail Address'))
else:
check = checker.check_mailaddress(
_('Mail Address'),
obj.input.email,
CHECK_EMPTY | CHECK_LENGTH | CHECK_VALID,
min = EMAIL_MIN_LENGTH,
max = EMAIL_MAX_LENGTH,
) and check
_password_flag = True
if not is_param(obj.input, 'new_password'):
_password_flag = False
checker.add_error(_('"%s" is required.') % _('New Password'))
if not is_param(obj.input, 'retype'):
check = False
_password_flag = False
checker.add_error(_('"%s" is required.') % _('Retype'))
if _password_flag == True:
check = checker.check_password(
_('Password'),
obj.input.new_password,
obj.input.retype,
CHECK_VALID | CHECK_LENGTH | CHECK_EMPTY,
min = PASSWORD_MIN_LENGTH,
max = PASSWORD_MAX_LENGTH,
) and check
check = checker.check_languages(
_('Language'),
obj.input.languages,
CHECK_EMPTY | CHECK_VALID | CHECK_LENGTH,
min = LANGUAGES_MIN_LENGTH,
max = LANGUAGES_MAX_LENGTH,
) and check
obj.view.alert = checker.errors
return check
def validates_network_storage(obj):
checker = Checker()
check = True
_ = obj._
checker.errors = []
if is_param(obj.input, 'network_storage_host_name'):
check = checker.check_domainname(_('Target Hostname'),
obj.input.network_storage_host_name,
CHECK_EMPTY | CHECK_VALID,
) and check
else:
check = False
checker.add_error(_('"%s" is required.') %_('Target Hostname'))
if is_param(obj.input, 'network_storage_port_number'):
check = checker.check_number(_('Target Port Number'),
obj.input.network_storage_port_number,
CHECK_VALID | CHECK_MIN | CHECK_MAX,
PORT_MIN_NUMBER,
PORT_MAX_NUMBER,
) and check
if is_param(obj.input, 'network_storage_authentication'):
check = checker.check_empty(_('iSCSI Authentication Type'),
obj.input.network_storage_authentication,
) and check
if obj.input.network_storage_authentication == ISCSI_CONFIG_VALUE_AUTH_METHOD_CHAP:
if is_param(obj.input, 'network_storage_user'):
check = checker.check_username_with_num(_('iSCSI Authentication User'),
obj.input.network_storage_user,
CHECK_VALID | CHECK_LENGTH,
CHAP_USER_MIN_LENGTH,
CHAP_USER_MAX_LENGTH,
) and check
else:
check = False
checker.add_error(_('"%s" is required.') %_('iSCSI Authentication User'))
if is_param(obj.input, 'network_storage_password'):
check = checker.check_password(_('iSCSI Authentication Password'),
obj.input.network_storage_password,
obj.input.network_storage_password,
CHECK_LENGTH,
CHAP_PASSWORD_MIN_LENGTH,
CHAP_PASSWORD_MAX_LENGTH,
) and check
else:
check = False
checker.add_error(_('"%s" is required.') %_('iSCSI Authentication Password'))
else:
check = False
checker.add_error(_('"%s" is required.') %_('iSCSI Authentication Type'))
obj.view.alert = checker.errors
return check
def validates_watch(obj, target, lang):
checker = Checker()
check = True
_ = obj._
checker.errors = []
if target not in WATCH_PLUGINS.values():
check = False
checker.add_error(_('"%s" is not watch target.') %_(target))
if lang not in DEFAULT_LANGS:
check = False
checker.add_error(_('"%s" is not supported language.') %_(lang))
obj.view.alert = checker.errors
return check
def validates_watch(obj, target, lang):
checker = Checker()
check = True
_ = obj._
checker.errors = []
if target not in WATCH_PLUGINS.values():
check = False
checker.add_error(_('"%s" is not watch target.') % _(target))
if lang not in DEFAULT_LANGS:
check = False
checker.add_error(_('"%s" is not supported language.') % _(lang))
obj.view.alert = checker.errors
return check
def validates_sid(obj):
checker = Checker()
check = True
_ = obj._
checker.errors = []
if not is_param(obj.input, 'sid'):
check = False
checker.add_error(_('"%s" is required.') % _('Copy Source'))
else:
check = checker.check_number(
_('Copy Source'), obj.input.sid, CHECK_EMPTY | CHECK_VALID
| CHECK_MIN | CHECK_MAX, ID_MIN_LENGTH, ID_MAX_LENGTH) and check
obj.view.alert = checker.errors
return check
def validates_fw_status(obj):
checker = Checker()
check = True
_ = obj._
checker.errors = []
if is_param(obj.input, 'status'):
check = checker.check_status(_('Status'), obj.input.status,
CHECK_EMPTY | CHECK_VALID,
FIREWALL_STATUS.values()) and check
else:
check = False
checker.add_error(_('"%s" is required.') % _('Status'))
obj.view.alert = checker.errors
return check
def validates_storage_pool(obj, uuid=None):
checker = Checker()
check = True
_ = obj._
checker.errors = []
if uuid:
check = checker.check_unique_key(_('Target UUID'),
uuid,
CHECK_EMPTY | CHECK_VALID,
) and check
else:
check = False
checker.add_error(_('"%s" is required.') %_('Target UUID'))
obj.view.alert = checker.errors
return check
def validates_network_storage(obj):
checker = Checker()
check = True
_ = obj._
checker.errors = []
if is_param(obj.input, 'iqn'):
check = checker.check_string(
_('Target IQN'),
obj.input.iqn,
CHECK_EMPTY | CHECK_ONLYSPACE,
None,
None,
None,
) and check
else:
check = False
checker.add_error(_('"%s" is required.') % _('Target IQN'))
if is_param(obj.input, 'status'):
check = checker.check_empty(
_('Action Status'),
obj.input.status,
) and check
else:
check = False
checker.add_error(_('"%s" is required.') % _('Action Status'))
if is_param(obj.input, 'host'):
check = checker.check_domainname(
_('Target Hostname'),
obj.input.host,
CHECK_EMPTY | CHECK_VALID,
) and check
else:
check = False
checker.add_error(_('"%s" is required.') % _('Target Hostname'))
if is_param(obj.input, 'port'):
check = checker.check_number(
_('Target Port Number'),
obj.input.port,
CHECK_VALID | CHECK_MIN | CHECK_MAX,
PORT_MIN_NUMBER,
PORT_MAX_NUMBER,
) and check
else:
check = False
checker.add_error(_('"%s" is required.') % _('Target Port Number'))
obj.view.alert = checker.errors
return check
def validates_storage_pool(obj, uuid=None):
checker = Checker()
check = True
_ = obj._
checker.errors = []
if uuid:
check = checker.check_unique_key(
_('Target UUID'),
uuid,
CHECK_EMPTY | CHECK_VALID,
) and check
else:
check = False
checker.add_error(_('"%s" is required.') % _('Target UUID'))
obj.view.alert = checker.errors
return check
def validates_nw_status(obj):
checker = Checker()
check = True
_ = obj._
checker.errors = []
if is_param(obj.input, 'status'):
status = int(obj.input.status)
check = checker.check_status(
_('Status'), status, CHECK_EMPTY | CHECK_VALID,
[NETWORK_ACTIVE, NETWORK_INACTIVE]) and check
else:
check = False
checker.add_error(_('"%s" is required.') % _('Status'))
obj.view.alert = checker.errors
return check
def validates_nw_status(obj):
checker = Checker()
check = True
_ = obj._
checker.errors = []
if is_param(obj.input, "status"):
status = int(obj.input.status)
check = (
checker.check_status(_("Status"), status, CHECK_EMPTY | CHECK_VALID, [NETWORK_ACTIVE, NETWORK_INACTIVE])
and check
)
else:
check = False
checker.add_error(_('"%s" is required.') % _("Status"))
obj.view.alert = checker.errors
return check
def validates_sid(obj):
checker = Checker()
check = True
_ = obj._
checker.errors = []
if not is_param(obj.input, 'sid'):
check = False
checker.add_error(_('"%s" is required.') % _('Copy Source'))
else:
check = checker.check_number(_('Copy Source'),
obj.input.sid,
CHECK_EMPTY | CHECK_VALID | CHECK_MIN | CHECK_MAX,
ID_MIN_LENGTH,
ID_MAX_LENGTH
) and check
obj.view.alert = checker.errors
return check
def validates_iptables_status(obj):
checker = Checker()
check = True
_ = obj._
checker.errors = []
if is_param(obj.input, 'status'):
check = checker.check_status(
_('Status'),
obj.input.status,
CHECK_EMPTY | CHECK_VALID,
IPTABLES_STATUS.values()
) and check
else:
check = False
checker.add_error(_('"%s" is required.') % _('Status'))
obj.view.alert = checker.errors
return check
def validates_policy(obj):
checker = Checker()
check = True
_ = obj._
checker.errors = []
if not is_param(obj.input, 'input_policy'):
check = False
checker.add_error(_('"%s" is required.') % _('INPUT Chain'))
else:
check = checker.check_firewall_policy(
_('INPUT Chain'), obj.input.input_policy,
CHECK_EMPTY | CHECK_VALID) and check
if not is_param(obj.input, 'output_policy'):
check = False
checker.add_error(_('"%s" is required.') % _('OUTPUT Chain'))
else:
check = checker.check_firewall_policy(
_('OUTPUT Chain'), obj.input.output_policy,
CHECK_EMPTY | CHECK_VALID) and check
if not is_param(obj.input, 'forward_policy'):
check = False
checker.add_error(_('"%s" is required.') % _('FORWARD Chain'))
else:
check = checker.check_firewall_policy(
_('FORWARD Chain'), obj.input.input_policy,
CHECK_EMPTY | CHECK_VALID) and check
obj.view.alert = checker.errors
return check
def validates_policy(obj):
checker = Checker()
check = True
_ = obj._
checker.errors = []
if not is_param(obj.input, "input_policy"):
check = False
checker.add_error(_('"%s" is required.') % _("INPUT Chain"))
else:
check = (
checker.check_firewall_policy(_("INPUT Chain"), obj.input.input_policy, CHECK_EMPTY | CHECK_VALID) and check
)
if not is_param(obj.input, "output_policy"):
check = False
checker.add_error(_('"%s" is required.') % _("OUTPUT Chain"))
else:
check = (
checker.check_firewall_policy(_("OUTPUT Chain"), obj.input.output_policy, CHECK_EMPTY | CHECK_VALID)
and check
)
if not is_param(obj.input, "forward_policy"):
check = False
checker.add_error(_('"%s" is required.') % _("FORWARD Chain"))
else:
check = (
checker.check_firewall_policy(_("FORWARD Chain"), obj.input.input_policy, CHECK_EMPTY | CHECK_VALID)
and check
)
obj.view.alert = checker.errors
return check
def validates_nic(obj):
checker = Checker()
check = True
_ = obj._
checker.errors = []
# nic_type - [phydev, virnet]
if is_param(obj.input, 'nic_type'):
if (obj.input.nic_type in ['phydev', 'virnet']) is False:
check = False
checker.add_error(_(""))
else:
check = False
checker.add_error(_('"%s" is required.') % _('Interface Type'))
# mac_address
if is_param(obj.input, 'mac_address'):
check = checker.check_macaddr(
_('MAC Address'),
obj.input.mac_address,
CHECK_EMPTY | CHECK_VALID
) and check
else:
check = False
checker.add_error(_('"%s" is required.') % _('MAC Address'))
obj.view.alert = checker.errors
return check
def validates_nic(obj):
checker = Checker()
check = True
_ = obj._
checker.errors = []
# nic_type - [phydev, virnet]
if is_param(obj.input, 'nic_type'):
if (obj.input.nic_type in ['phydev', 'virnet']) is False:
check = False
checker.add_error(_(""))
else:
check = False
checker.add_error(_('"%s" is required.') % _('Interface Type'))
# mac_address
if is_param(obj.input, 'mac_address'):
check = checker.check_macaddr(_('MAC Address'), obj.input.mac_address,
CHECK_EMPTY | CHECK_VALID) and check
else:
check = False
checker.add_error(_('"%s" is required.') % _('MAC Address'))
obj.view.alert = checker.errors
return check
def validates_guest_export(obj):
checker = Checker()
check = True
_ = obj._
checker.errors = []
if not is_param(obj.input, 'export_title'):
check = False
checker.add_error(_('Parameter export_title does not exist.'))
else:
check = checker.check_string(
_('Title'),
obj.input.export_title,
CHECK_LENGTH | CHECK_ONLYSPACE,
None,
min = NOTE_TITLE_MIN_LENGTH,
max = NOTE_TITLE_MAX_LENGTH,
) and check
obj.view.alert = checker.errors
return check
def validates_guest_export(obj):
checker = Checker()
check = True
_ = obj._
checker.errors = []
if not is_param(obj.input, 'export_title'):
check = False
checker.add_error(_('Parameter export_title does not exist.'))
else:
check = checker.check_string(
_('Title'),
obj.input.export_title,
CHECK_LENGTH | CHECK_ONLYSPACE,
None,
min=NOTE_TITLE_MIN_LENGTH,
max=NOTE_TITLE_MAX_LENGTH,
) and check
obj.view.alert = checker.errors
return check
def validates_network_storage(obj):
checker = Checker()
check = True
_ = obj._
checker.errors = []
if is_param(obj.input, 'iqn'):
check = checker.check_string(_('Target IQN'),
obj.input.iqn,
CHECK_EMPTY | CHECK_ONLYSPACE,
None,
None,
None,
) and check
else:
check = False
checker.add_error(_('"%s" is required.') %_('Target IQN'))
if is_param(obj.input, 'status'):
check = checker.check_empty(_('Action Status'),
obj.input.status,
) and check
else:
check = False
checker.add_error(_('"%s" is required.') %_('Action Status'))
if is_param(obj.input, 'host'):
check = checker.check_domainname(_('Target Hostname'),
obj.input.host,
CHECK_EMPTY | CHECK_VALID,
) and check
else:
check = False
checker.add_error(_('"%s" is required.') %_('Target Hostname'))
if is_param(obj.input, 'port'):
check = checker.check_number(_('Target Port Number'),
obj.input.port,
CHECK_VALID | CHECK_MIN | CHECK_MAX,
PORT_MIN_NUMBER,
PORT_MAX_NUMBER,
) and check
else:
check = False
checker.add_error(_('"%s" is required.') %_('Target Port Number'))
obj.view.alert = checker.errors
return check
def validates_general(obj):
checker = Checker()
check = True
_ = obj._
checker.errors = []
if is_param(obj.input, 'gateway'):
check = checker.check_ipaddr(
_('Default Gateway'),
obj.input.gateway,
CHECK_EMPTY | CHECK_VALID,
) and check
else:
check = False
checker.add_error(_('"%s" is required.') % _('Default Gateway'))
if is_param(obj.input, 'fqdn'):
check = checker.check_domainname(
_('FQDN'),
obj.input.fqdn,
CHECK_EMPTY | CHECK_VALID | CHECK_LENGTH,
FQDN_MIN_LENGTH,
FQDN_MAX_LENGTH,
) and check
else:
check = False
checker.add_error(_('"%s" is required.') % _('FQDN'))
if is_param(obj.input, 'nameserver'):
nameservers = obj.input.nameserver.strip().split()
if len(nameservers) != 0:
for name_server in nameservers:
if name_server == "":
continue
check = checker.check_ipaddr(
_('Nameserver'),
name_server,
CHECK_VALID,
) and check
else:
check = False
checker.add_error(_('"%s" is required.') % _('Nameserver'))
else:
check = False
checker.add_error(_('"%s" is required.') % _('Nameserver'))
obj.view.alert = checker.errors
return check
def validates_general(obj):
checker = Checker()
check = True
_ = obj._
checker.errors = []
if is_param(obj.input, 'gateway'):
check = checker.check_ipaddr(_('Default Gateway'),
obj.input.gateway,
CHECK_EMPTY | CHECK_VALID,
) and check
else:
check = False
checker.add_error(_('"%s" is required.') %_('Default Gateway'))
if is_param(obj.input, 'fqdn'):
check = checker.check_domainname(_('FQDN'),
obj.input.fqdn,
CHECK_EMPTY | CHECK_VALID | CHECK_LENGTH,
FQDN_MIN_LENGTH,
FQDN_MAX_LENGTH,
) and check
else:
check = False
checker.add_error(_('"%s" is required.') %_('FQDN'))
if is_param(obj.input, 'nameserver'):
nameservers = obj.input.nameserver.strip().split()
if len(nameservers) != 0:
for name_server in nameservers:
if name_server == "":
continue
check = checker.check_ipaddr(_('Nameserver'),
name_server,
CHECK_VALID,
) and check
else:
check = False
checker.add_error(_('"%s" is required.') %_('Nameserver'))
else:
check = False
checker.add_error(_('"%s" is required.') %_('Nameserver'))
obj.view.alert = checker.errors
return check
def validates_pool_dir(obj, now_pools):
checker = Checker()
check = True
_ = obj._
checker.errors = []
if is_param(obj.input, "pool_name"):
check = (
checker.check_string(_("Storage Pool Name"), obj.input.pool_name, CHECK_EMPTY | CHECK_ONLYSPACE, None)
and check
)
if obj.input.pool_name in now_pools:
check = False
checker.add_error(_('%s "%s" already exists.') % (_("Storage Pool Name"), obj.input.pool_name))
else:
check = False
checker.add_error(_('"%s" is required.') % _("Storage Pool Name"))
if is_param(obj.input, "pool_target_path"):
check = (
checker.check_directory(
_("Directory Path"), obj.input.pool_target_path, CHECK_EMPTY | CHECK_STARTROOT | CHECK_NOTROOT
)
and check
)
try:
kvc = KaresansuiVirtConnection()
for pool_name in now_pools:
target_path = kvc.get_storage_pool_targetpath(pool_name)
if obj.input.pool_target_path == target_path:
check = False
checker.add_error(
_('Storagepool target path "%s" is already being used.') % (obj.input.pool_target_path)
)
finally:
kvc.close()
else:
check = False
checker.add_error(_('"%s" is required.') % _("Directory Path"))
obj.view.alert = checker.errors
return check
def validates_pool_iscsi(obj, now_pools):
checker = Checker()
check = True
_ = obj._
checker.errors = []
if is_param(obj.input, "pool_name"):
check = (
checker.check_string(_("Storage Pool Name"), obj.input.pool_name, CHECK_EMPTY | CHECK_ONLYSPACE, None)
and check
)
if obj.input.pool_name in now_pools:
check = False
checker.add_error(_('%s "%s" already exists.') % (_("Storage Pool Name"), obj.input.pool_name))
else:
check = False
checker.add_error(_('"%s" is required.') % _("Storage Pool Name"))
if is_param(obj.input, "pool_target_iscsi"):
check = (
checker.check_string(_("iSCSI Target"), obj.input.pool_target_iscsi, CHECK_EMPTY | CHECK_ONLYSPACE, None)
and check
)
try:
kvc = KaresansuiVirtConnection()
for pool_name in now_pools:
pool_iqn = kvc.get_storage_pool_sourcedevicepath(pool_name)
if obj.input.pool_target_iscsi == pool_iqn:
check = False
checker.add_error(
_('Storagepool iSCSI target IQN "%s" is already being used.') % (obj.input.pool_target_iscsi)
)
finally:
kvc.close()
else:
check = False
checker.add_error(_('"%s" is required.') % _("iSCSI Target"))
obj.view.alert = checker.errors
return check
def validates_pool_iscsi(obj, now_pools):
checker = Checker()
check = True
_ = obj._
checker.errors = []
if is_param(obj.input, 'pool_name'):
check = checker.check_string(_('Storage Pool Name'),
obj.input.pool_name,
CHECK_EMPTY | CHECK_ONLYSPACE,
None,
) and check
if obj.input.pool_name in now_pools:
check = False
checker.add_error(_('%s "%s" already exists.') % (_('Storage Pool Name'), obj.input.pool_name))
else:
check = False
checker.add_error(_('"%s" is required.') %_('Storage Pool Name'))
if is_param(obj.input, 'pool_target_iscsi'):
check = checker.check_string(_('iSCSI Target'),
obj.input.pool_target_iscsi,
CHECK_EMPTY | CHECK_ONLYSPACE,
None,
) and check
try:
kvc = KaresansuiVirtConnection()
for pool_name in now_pools:
pool_iqn = kvc.get_storage_pool_sourcedevicepath(pool_name)
if obj.input.pool_target_iscsi == pool_iqn:
check = False
checker.add_error(_('Storagepool iSCSI target IQN "%s" is already being used.') % (obj.input.pool_target_iscsi))
finally:
kvc.close()
else:
check = False
checker.add_error(_('"%s" is required.') %_('iSCSI Target'))
obj.view.alert = checker.errors
return check
def validates_pool_dir(obj, now_pools):
checker = Checker()
check = True
_ = obj._
checker.errors = []
if is_param(obj.input, 'pool_name'):
check = checker.check_string(_('Storage Pool Name'),
obj.input.pool_name,
CHECK_EMPTY | CHECK_ONLYSPACE,
None,
) and check
if obj.input.pool_name in now_pools:
check = False
checker.add_error(_('%s "%s" already exists.') % (_('Storage Pool Name'), obj.input.pool_name))
else:
check = False
checker.add_error(_('"%s" is required.') %_('Storage Pool Name'))
if is_param(obj.input, 'pool_target_path'):
check = checker.check_directory(_('Directory Path'),
obj.input.pool_target_path,
CHECK_EMPTY | CHECK_STARTROOT | CHECK_NOTROOT
) and check
try:
kvc = KaresansuiVirtConnection()
for pool_name in now_pools:
target_path = kvc.get_storage_pool_targetpath(pool_name)
if obj.input.pool_target_path == target_path:
check = False
checker.add_error(_('Storagepool target path "%s" is already being used.') % (obj.input.pool_target_path))
finally:
kvc.close()
else:
check = False
checker.add_error(_('"%s" is required.') %_('Directory Path'))
obj.view.alert = checker.errors
return check
def validates_bonding(obj, target_regex):
checker = Checker()
check = True
_ = obj._
checker.errors = []
count = 0
for input in obj.input:
m = target_regex.match(input)
if m:
count += 1
check = checker.check_netdev_name(
_('Target Device Name'),
m.group('dev'),
CHECK_EMPTY | CHECK_VALID,
) and check
if count < 2:
check = False
checker.add_error(_('Not enough target devices for bonding.'))
if is_param(obj.input, 'bonding_target_dev_primary'):
check = checker.check_netdev_name(
_('Primary Device Name'),
obj.input.bonding_target_dev_primary,
CHECK_EMPTY | CHECK_VALID,
) and check
else:
check = False
checker.add_error(_('"%s" is required.') % _('Primary Device Name'))
if is_param(obj.input, 'bonding_mode'):
if obj.input.bonding_mode not in BONDING_MODE:
check = False
checker.add_error(_('Unknown bonding mode.'))
else:
check = False
checker.add_error(_('"%s" is required.') % _('Bonding Mode'))
obj.view.alert = checker.errors
return check
def validates_nic(obj):
checker = Checker()
check = True
_ = obj._
checker.errors = []
if is_param(obj.input, 'bootproto'):
if obj.input.bootproto == "static":
if is_param(obj.input, 'ipaddr'):
check = checker.check_ipaddr(
_('IP Address'),
obj.input.ipaddr,
CHECK_EMPTY | CHECK_VALID,
) and check
else:
check = False
checker.add_error(_('"%s" is required.') % _('IP Address'))
if is_param(obj.input, 'netmask'):
check = checker.check_netmask(
_('Netmask'),
obj.input.netmask,
CHECK_EMPTY | CHECK_VALID,
) and check
else:
check = False
checker.add_error(_('"%s" is required.') % _('Netmask'))
else:
if is_param(obj.input, 'ipaddr'):
check = checker.check_ipaddr(
_('IP Address'),
obj.input.ipaddr,
CHECK_VALID,
) and check
if is_param(obj.input, 'netmask'):
check = checker.check_netmask(
_('Netmask'),
obj.input.netmask,
CHECK_VALID,
) and check
else:
check = False
checker.add_error(_('"%s" is required.') % _('Boot-time Protocol'))
obj.view.alert = checker.errors
return check
def validates_bonding(obj, target_regex):
checker = Checker()
check = True
_ = obj._
checker.errors = []
count = 0
for input in obj.input:
m = target_regex.match(input)
if m:
count += 1
check = checker.check_netdev_name(_('Target Device Name'),
m.group('dev'),
CHECK_EMPTY | CHECK_VALID,
) and check
if count < 2:
check = False
checker.add_error(_('Not enough target devices for bonding.'))
if is_param(obj.input, 'bonding_target_dev_primary'):
check = checker.check_netdev_name(_('Primary Device Name'),
obj.input.bonding_target_dev_primary,
CHECK_EMPTY | CHECK_VALID,
) and check
else:
check = False
checker.add_error(_('"%s" is required.') %_('Primary Device Name'))
if is_param(obj.input, 'bonding_mode'):
if obj.input.bonding_mode not in BONDING_MODE:
check = False
checker.add_error(_('Unknown bonding mode.'))
else:
check = False
checker.add_error(_('"%s" is required.') %_('Bonding Mode'))
obj.view.alert = checker.errors
return check
def validates_mail(obj):
checker = Checker()
check = True
_ = obj._
checker.errors = []
if not is_param(obj.input, 'server'):
check = False
checker.add_error(_('"%s" is required.') % _('Mail Server Name'))
else:
check_server = checker.check_domainname(_('Mail Server Name'),
obj.input.server,
CHECK_EMPTY | CHECK_VALID,
) or \
checker.check_ipaddr(_('Mail Server Name'),
obj.input.server,
CHECK_EMPTY | CHECK_VALID,
)
check = check_server and check
if not is_param(obj.input, 'port'):
check = False
checker.add_error(_('"%s" is required.') % _('Port Number'))
else:
check = checker.check_number(_('Port Number'),
obj.input.port,
CHECK_EMPTY | CHECK_VALID | CHECK_MIN | CHECK_MAX,
PORT_MIN_NUMBER,
PORT_MAX_NUMBER,
) and check
if not is_param(obj.input, 'email'):
check = False
checker.add_error(_('"%s" is required.') % _('Recipient Mail Address'))
else:
check = checker.check_mailaddress(_('Recipient Mail Address'),
obj.input.email,
CHECK_EMPTY | CHECK_VALID | CHECK_LENGTH,
min = EMAIL_MIN_LENGTH,
max = EMAIL_MAX_LENGTH
) and check
obj.view.alert = checker.errors
return check
def validates_mail(obj):
checker = Checker()
check = True
_ = obj._
checker.errors = []
if not is_param(obj.input, 'server'):
check = False
checker.add_error(_('"%s" is required.') % _('Mail Server Name'))
else:
check_server = checker.check_domainname(_('Mail Server Name'),
obj.input.server,
CHECK_EMPTY | CHECK_VALID,
) or \
checker.check_ipaddr(_('Mail Server Name'),
obj.input.server,
CHECK_EMPTY | CHECK_VALID,
)
check = check_server and check
if not is_param(obj.input, 'port'):
check = False
checker.add_error(_('"%s" is required.') % _('Port Number'))
else:
check = checker.check_number(_('Port Number'),
obj.input.port,
CHECK_EMPTY | CHECK_VALID | CHECK_MIN | CHECK_MAX,
PORT_MIN_NUMBER,
PORT_MAX_NUMBER,
) and check
if not is_param(obj.input, 'email'):
check = False
checker.add_error(_('"%s" is required.') % _('Recipient Mail Address'))
else:
check = checker.check_mailaddress(_('Recipient Mail Address'),
obj.input.email,
CHECK_EMPTY | CHECK_VALID | CHECK_LENGTH,
min = EMAIL_MIN_LENGTH,
max = EMAIL_MAX_LENGTH
) and check
obj.view.alert = checker.errors
return check
def validates_nic(obj):
checker = Checker()
check = True
_ = obj._
checker.errors = []
if is_param(obj.input, 'bootproto'):
if obj.input.bootproto == "static":
if is_param(obj.input, 'ipaddr'):
check = checker.check_ipaddr(_('IP Address'),
obj.input.ipaddr,
CHECK_EMPTY | CHECK_VALID,
) and check
else:
check = False
checker.add_error(_('"%s" is required.') %_('IP Address'))
if is_param(obj.input, 'netmask'):
check = checker.check_netmask(_('Netmask'),
obj.input.netmask,
CHECK_EMPTY | CHECK_VALID,
) and check
else:
check = False
checker.add_error(_('"%s" is required.') %_('Netmask'))
else:
if is_param(obj.input, 'ipaddr'):
check = checker.check_ipaddr(_('IP Address'),
obj.input.ipaddr,
CHECK_VALID,
) and check
if is_param(obj.input, 'netmask'):
check = checker.check_netmask(_('Netmask'),
obj.input.netmask,
CHECK_VALID,
) and check
else:
check = False
checker.add_error(_('"%s" is required.') %_('Boot-time Protocol'))
obj.view.alert = checker.errors
return check
def validates_host_add(obj):
checker = Checker()
check = True
_ = obj._
checker.errors = []
if not is_param(obj.input, 'm_name'):
check = False
checker.add_error(_('Parameter m_name does not exist.'))
else:
check = checker.check_string(
_('Machine Name'),
obj.input.m_name,
CHECK_EMPTY | CHECK_LENGTH | CHECK_ONLYSPACE,
None,
min = MACHINE_NAME_MIN_LENGTH,
max = MACHINE_NAME_MAX_LENGTH,
) and check
if not is_param(obj.input, 'm_hostname'):
check = False
checker.add_error(_('"%s" is required.') % _('FQDN'))
else:
m_hostname_parts = obj.input.m_hostname.split(":")
if len(m_hostname_parts) > 2:
check = False
checker.add_error(_('%s contains too many colon(:)s.') % _('FQDN'))
else:
check = checker.check_domainname(
_('FQDN'),
m_hostname_parts[0],
CHECK_EMPTY | CHECK_LENGTH | CHECK_VALID,
min = FQDN_MIN_LENGTH,
max = FQDN_MAX_LENGTH,
) and check
try:
check = checker.check_number(
_('Port Number'),
m_hostname_parts[1],
CHECK_EMPTY | CHECK_VALID | CHECK_MIN | CHECK_MAX,
PORT_MIN_NUMBER,
PORT_MAX_NUMBER,
) and check
except IndexError:
# when reach here, 'm_hostname' has only host name
pass
if not is_param(obj.input, 'm_uuid'):
check = False
checker.add_error(_('"%s" is required.') % _('Unique Key'))
else:
check = checker.check_unique_key(
_('Unique Key'),
obj.input.m_uuid,
CHECK_EMPTY | CHECK_VALID
) and check
if is_param(obj.input, 'note_title'):
check = checker.check_string(
_('Title'),
obj.input.note_title,
CHECK_LENGTH | CHECK_ONLYSPACE,
None,
min = NOTE_TITLE_MIN_LENGTH,
max = NOTE_TITLE_MAX_LENGTH,
) and check
if is_param(obj.input, 'note_value'):
check = checker.check_string(
_('Note'),
obj.input.note_value,
CHECK_ONLYSPACE,
None,
None,
None,
) and check
if is_param(obj.input, 'tags'):
for tag in comma_split(obj.input.tags):
check = checker.check_string(
_('Tag'),
tag,
CHECK_LENGTH | CHECK_ONLYSPACE,
None,
min = TAG_MIN_LENGTH,
max = TAG_MAX_LENGTH,
) and check
obj.view.alert = checker.errors
return check
def validates_rule(obj, is_newrule=False):
checker = Checker()
check = True
_ = obj._
checker.errors = []
obj.view.error_msg = checker.errors
if is_newrule:
kit = KaresansuiIpTables()
rule_id_max_length = 1
if os.path.exists(kit.firewall_xml_file) is False:
check = False
checker.add_error(_('Has not been initialized. Please initialize.'))
else:
kit.firewall_xml = kit.read_firewall_xml()
rule_id_max_length += len(kit.get_rules())
if not is_param(obj.input, 'rule_id'):
check = False
checker.add_error(_('"%s" is required.') % _('ID'))
else:
check = checker.check_number(
_('ID'),
obj.input.rule_id,
CHECK_EMPTY | CHECK_VALID | CHECK_MIN | CHECK_MAX,
min = ID_MIN_LENGTH,
max = rule_id_max_length,
) and check
if not is_param(obj.input, 'target'):
check = False
checker.add_error(_('"%s" is required.') % _('Target'))
else:
check = checker.check_firewall_policy(
_('Target'),
obj.input.target,
CHECK_EMPTY | CHECK_VALID,
) and check
if not is_param(obj.input, 'protocol'):
check = False
checker.add_error(_('"%s" is required.') % _('Protocol'))
else:
check = checker.check_firewall_protocol(
_('Protocol'),
obj.input.protocol,
CHECK_VALID,
) and check
if not is_param(obj.input, 'source'):
check = False
checker.add_error(_('"%s" is required.') % _('Source Address'))
else:
check = checker.check_ipaddr(
_('Source Address'),
obj.input.source,
CHECK_VALID,
) and check
if not is_param(obj.input, 'sport'):
check = False
checker.add_error(_('"%s" is required.') % _('Source Port'))
else:
if obj.input.protocol == 'tcp' or obj.input.protocol == 'udp':
check = checker.check_number(
_('Source Port'),
obj.input.sport,
CHECK_VALID | CHECK_MIN | CHECK_MAX,
min = PORT_MIN_NUMBER,
max = PORT_MAX_NUMBER,
) and check
if not is_param(obj.input, 'destination'):
check = False
checker.add_error(_('"%s" is required.') % _('Destination Address'))
else:
check = checker.check_ipaddr(
_('Destination Address'),
obj.input.destination,
CHECK_VALID,
) and check
if not is_param(obj.input, 'dport'):
check = False
checker.add_error(_('"%s" is required.') % _('Destination Port'))
else:
if obj.input.protocol == 'tcp' or obj.input.protocol == 'udp':
check = checker.check_number(
_('Destination Port'),
obj.input.dport,
CHECK_VALID | CHECK_MIN | CHECK_MAX,
min = PORT_MIN_NUMBER,
max = PORT_MAX_NUMBER,
) and check
if not is_param(obj.input, 'inif'):
check = False
checker.add_error(_('"%s" is required.') % _('In Interface'))
else:
check = checker.check_firewall_if(
_('In Interface'),
obj.input.inif,
CHECK_EXIST,
) and check
if not is_param(obj.input, 'outif'):
check = False
checker.add_error(_('"%s" is required.') % _('Out Interface'))
else:
check = checker.check_firewall_if(
_('Out Interface'),
obj.input.outif,
CHECK_EXIST,
) and check
obj.view.alert = checker.errors
return check
def validates_watch(obj):
checker = Checker()
check = True
_ = obj._
checker.errors = []
if is_param(obj.input, 'watch_name'):
check = checker.check_string(
_('Watch Name'),
obj.input.watch_name,
CHECK_EMPTY | CHECK_ONLYSPACE,
None,
) and check
else:
check = False
checker.add_error(_('"%s" is required.') % _('Watch Name'))
if is_param(obj.input, 'continuation_count'):
check = checker.check_number(
_('Alert Trigger Count'),
obj.input.continuation_count,
CHECK_EMPTY | CHECK_VALID | CHECK_MIN | CHECK_MAX,
CONTINUATION_COUNT_MIN,
CONTINUATION_COUNT_MAX,
) and check
else:
check = False
checker.add_error(_('"%s" is required.') % _('Alert Trigger Count'))
if is_param(obj.input, 'prohibition_period'):
check = checker.check_number(
_('Silent Period'),
obj.input.prohibition_period,
CHECK_EMPTY | CHECK_VALID | CHECK_MIN | CHECK_MAX,
PROHIBITION_PERIOD_MIN,
PROHIBITION_PERIOD_MAX,
) and check
else:
check = False
checker.add_error(_('"%s" is required.') % _('Silent Period'))
if is_param(obj.input, 'threshold_fraction'):
fraction = int(obj.input.threshold_fraction)
else:
fraction = 0
if is_param(obj.input, 'threshold_val1'):
if fraction == 0:
check = checker.check_number(
_('Threshold Value'),
obj.input.threshold_val1,
CHECK_EMPTY | CHECK_VALID | CHECK_MIN,
THRESHOLD_VAL_MIN,
None,
) and check
else:
check = checker.check_fraction(
_('Threshold Value'),
obj.input.threshold_val1,
CHECK_EMPTY | CHECK_VALID | CHECK_MIN,
THRESHOLD_VAL_MIN,
None,
fraction,
) and check
else:
check = False
checker.add_error(_('"%s" is required.') % _('Threshold Value'))
if is_param(obj.input, 'threshold_val2'):
if fraction == 0:
check = checker.check_number(
_('Threshold Value'),
obj.input.threshold_val2,
CHECK_EMPTY | CHECK_VALID | CHECK_MIN,
THRESHOLD_VAL_MIN,
None,
) and check
else:
check = checker.check_fraction(
_('Threshold Value'),
obj.input.threshold_val2,
CHECK_EMPTY | CHECK_VALID | CHECK_MIN,
THRESHOLD_VAL_MIN,
None,
fraction,
) and check
else:
check = False
checker.add_error(_('"%s" is required.') % _('Threshold Value'))
if not is_param(obj.input, 'threshold_type'):
check = False
checker.add_error(_('"%s" is required.') % _('Threshold Type'))
if is_param(obj.input, 'notify_mail_to'):
if obj.input.notify_mail_to != "":
check = checker.check_mailaddress(
_('Mail To'),
obj.input.notify_mail_to,
CHECK_LENGTH | CHECK_VALID,
EMAIL_MIN_LENGTH,
EMAIL_MAX_LENGTH,
) and check
if is_param(obj.input, 'notify_mail_from'):
if obj.input.notify_mail_from != "":
check = checker.check_mailaddress(
_('Mail From'),
obj.input.notify_mail_from,
CHECK_LENGTH | CHECK_VALID,
EMAIL_MIN_LENGTH,
EMAIL_MAX_LENGTH,
) and check
obj.view.alert = checker.errors
return check
def validates_host_edit(obj):
checker = Checker()
check = True
_ = obj._
checker.errors = []
if not is_param(obj.input, 'm_name'):
check = False
checker.add_error(_('Parameter m_name does not exist.'))
else:
check = checker.check_string(
_('Machine Name'),
obj.input.m_name,
CHECK_EMPTY | CHECK_LENGTH | CHECK_ONLYSPACE,
None,
min=MACHINE_NAME_MIN_LENGTH,
max=MACHINE_NAME_MAX_LENGTH,
) and check
if not is_param(obj.input, 'm_connect_type'):
check = False
checker.add_error(_('Parameter m_connect_type does not exist.'))
else:
if obj.input.m_connect_type == "karesansui":
if not is_param(obj.input, 'm_hostname'):
check = False
checker.add_error(_('"%s" is required.') % _('FQDN'))
else:
m_hostname_parts = obj.input.m_hostname.split(":")
if len(m_hostname_parts) > 2:
check = False
checker.add_error(
_('%s contains too many colon(:)s.') % _('FQDN'))
else:
check = checker.check_domainname(
_('FQDN'),
m_hostname_parts[0],
CHECK_EMPTY | CHECK_LENGTH | CHECK_VALID,
min=FQDN_MIN_LENGTH,
max=FQDN_MAX_LENGTH,
) and check
try:
check = checker.check_number(
_('Port Number'),
m_hostname_parts[1],
CHECK_EMPTY | CHECK_VALID | CHECK_MIN | CHECK_MAX,
PORT_MIN_NUMBER,
PORT_MAX_NUMBER,
) and check
except IndexError:
# when reach here, 'm_hostname' has only host name
pass
if obj.input.m_connect_type == "libvirt":
if not is_param(obj.input, 'm_uri'):
check = False
checker.add_error(_('"%s" is required.') % _('URI'))
else:
pass
if is_param(obj.input,
'm_auth_user') and obj.input.m_auth_user != "":
check = checker.check_username(
_('User Name'),
obj.input.m_auth_user,
CHECK_LENGTH | CHECK_ONLYSPACE,
min=USER_MIN_LENGTH,
max=USER_MAX_LENGTH,
) and check
if is_param(obj.input, 'note_title'):
check = checker.check_string(
_('Title'),
obj.input.note_title,
CHECK_LENGTH | CHECK_ONLYSPACE,
None,
min=NOTE_TITLE_MIN_LENGTH,
max=NOTE_TITLE_MAX_LENGTH,
) and check
if is_param(obj.input, 'note_value'):
check = checker.check_string(
_('Note'),
obj.input.note_value,
CHECK_ONLYSPACE,
None,
None,
None,
) and check
if is_param(obj.input, 'tags'):
for tag in comma_split(obj.input.tags):
check = checker.check_string(
_('Tag'),
tag,
CHECK_LENGTH | CHECK_ONLYSPACE,
None,
min=TAG_MIN_LENGTH,
max=TAG_MAX_LENGTH,
) and check
obj.view.alert = checker.errors
return check
def validates_network(obj, network_name=None):
checker = Checker()
check = True
_ = obj._
checker.errors = []
if not network_name:
check = False
checker.add_error(_('Specify network name.'))
if not is_param(obj.input, 'cidr'):
check = False
checker.add_error(_('Specify bridge IP address for the network.'))
else:
check = checker.check_ipaddr(
_('Bridge IP Address/Netmask'),
obj.input.cidr,
CHECK_EMPTY | CHECK_VALID,
) and check
if not is_param(obj.input, 'bridge'):
check = False
checker.add_error(_('Specify bridge name to create for the network.'))
else:
check = checker.check_netdev_name(
_('Bridge Device Name'),
obj.input.bridge,
CHECK_EMPTY | CHECK_VALID,
) and check
A = is_param(obj.input, 'dhcp_start')
B = is_param(obj.input, 'dhcp_end')
#if not ( ((not A) and (not B)) or (A and B)):
if not (A and B):
check = False
checker.add_error(
_('Specify both %s and %s') %
(_('DHCP Start Address'), _('DHCP End Address')))
if is_param(obj.input, 'dhcp_start'):
check = checker.check_ipaddr(
_('DHCP Start Address'),
obj.input.dhcp_start,
CHECK_EMPTY | CHECK_ONLYSPACE | CHECK_VALID,
) and check
if is_param(obj.input, 'dhcp_end'):
check = checker.check_ipaddr(
_('DHCP End Address'),
obj.input.dhcp_end,
CHECK_EMPTY | CHECK_ONLYSPACE | CHECK_VALID,
) and check
check = checker.check_if_ips_are_in_network([
_('DHCP Start Address'),
_('DHCP End Address'),
_('Bridge IP Address/Netmask')
], [obj.input.dhcp_start, obj.input.dhcp_end], obj.input.cidr, CHECK_VALID
| CHECK_UNIQUE) and check
check = checker.check_ip_range([
_('DHCP Start Address'),
_('DHCP End Address'),
_('Bridge IP Address/Netmask')
], [obj.input.dhcp_start, obj.input.dhcp_end, obj.input.cidr],
CHECK_VALID) and check
check = checker.check_virt_network_address_conflict(
_('Bridge IP Address/Netmask'),
obj.input.cidr,
[network_name], # names to ignore
CHECK_VALID) and check
if is_param(obj.input, 'forward_mode'):
check = checker.check_forward_mode(
_('Forward Mode'),
obj.input.forward_mode,
CHECK_VALID,
) and check
obj.view.alert = checker.errors
return check
def validates_guest_add(obj):
checker = Checker()
check = True
_ = obj._
checker.errors = []
if not is_param(obj.input, 'm_name'):
check = False
checker.add_error(_('Parameter m_name does not exist.'))
else:
check = checker.check_string(
_('Machine Name'),
obj.input.m_name,
CHECK_EMPTY | CHECK_LENGTH | CHECK_ONLYSPACE,
None,
min=MACHINE_NAME_MIN_LENGTH,
max=MACHINE_NAME_MAX_LENGTH,
) and check
if is_param(obj.input, 'note_title'):
check = checker.check_string(
_('Title'),
obj.input.note_title,
CHECK_LENGTH | CHECK_ONLYSPACE,
None,
min=NOTE_TITLE_MIN_LENGTH,
max=NOTE_TITLE_MAX_LENGTH,
) and check
if is_param(obj.input, 'note_value'):
check = checker.check_string(
_('Note'),
obj.input.note_value,
CHECK_ONLYSPACE,
None,
None,
None,
) and check
if is_param(obj.input, 'tags'):
for tag in comma_split(obj.input.tags):
check = checker.check_string(
_('Tag'),
tag,
CHECK_LENGTH | CHECK_ONLYSPACE,
None,
min=TAG_MIN_LENGTH,
max=TAG_MAX_LENGTH,
) and check
if not is_param(obj.input, 'm_hypervisor'):
check = False
checker.add_error(_('Parameter m_hypervisor does not exist.'))
else:
check = checker.check_hypervisor(
_('Hypervisor'),
obj.input.m_hypervisor,
CHECK_EMPTY | CHECK_VALID | CHECK_MIN | CHECK_MAX,
HYPERVISOR_MIN_SIZE,
HYPERVISOR_MAX_SIZE,
) and check
if not is_param(obj.input, 'domain_name'):
check = False
checker.add_error(_('Parameter domain_name does not exist.'))
else:
check = checker.check_string(
_('Domain Name'),
obj.input.domain_name,
CHECK_EMPTY | CHECK_VALID | CHECK_LENGTH | CHECK_ONLYSPACE,
'[^-a-zA-Z0-9_\.]+',
DOMAIN_NAME_MIN_LENGTH,
DOMAIN_NAME_MAX_LENGTH,
) and check
if obj.input.domain_name in get_dom_list():
dom_type = get_dom_type(obj.input.domain_name)
checker.add_error(
_("The same domain name already exists for hypervisor '%s'.") %
dom_type.upper())
check = False
if is_param(obj.input, 'vm_mem_size'):
check = checker.check_number(
_('Memory Size (MB)'),
obj.input.vm_mem_size,
CHECK_VALID | CHECK_MIN | CHECK_EMPTY,
MEMORY_MIN_SIZE,
None,
) and check
if is_param(obj.input, 'pool_type'):
if obj.input.pool_type != "block":
if is_param(obj.input, 'vm_disk_size'):
check = checker.check_number(
_('Disk Size (MB)'),
obj.input.vm_disk_size,
CHECK_VALID | CHECK_MIN | CHECK_EMPTY,
DISK_MIN_SIZE,
None,
) and check
if not is_param(obj.input, 'boot_image'):
check = False
checker.add_error(_('Parameter boot_image does not exist.'))
else:
if obj.input.boot_image == "kernel":
if not is_param(obj.input, 'vm_kernel'):
check = False
checker.add_error(_('Parameter vm_kernel does not exist.'))
else:
check = checker.check_startfile(
_('Kernel Image'),
obj.input.vm_kernel,
CHECK_EMPTY | CHECK_VALID | CHECK_EXIST,
) and check
if not is_param(obj.input, 'vm_initrd'):
check = False
checker.add_error(_('Parameter vm_initrd does not exist.'))
else:
check = checker.check_startfile(
_('Initrd Image'),
obj.input.vm_initrd,
CHECK_EMPTY | CHECK_VALID | CHECK_EXIST,
) and check
if obj.input.boot_image == "iso":
if not is_param(obj.input, 'vm_iso'):
check = False
checker.add_error(_('Parameter vm_iso does not exist.'))
else:
check = checker.check_startfile(
_('ISO Image'),
obj.input.vm_iso,
CHECK_EMPTY | CHECK_VALID | CHECK_EXIST,
) and check
if check:
check = is_iso9660_filesystem_format(obj.input.vm_iso)
checker.add_error(
_('"%s" is not valid ISO 9660 CD-ROM filesystem data.')
% obj.input.vm_iso)
if not is_param(obj.input, 'keymap'):
check = False
checker.add_error(_('"%s" is required.') % _('Graphics Keymap'))
else:
hypervisor = "KVM"
if int(obj.input.m_hypervisor) == MACHINE_HYPERVISOR['XEN']:
hypervisor = "XEN"
elif int(obj.input.m_hypervisor) == MACHINE_HYPERVISOR['KVM']:
hypervisor = "KVM"
check = checker.check_keymap(_('Graphics Keymap'), obj.input.keymap,
CHECK_EMPTY | CHECK_EXIST,
hypervisor) and check
if not is_param(obj.input, 'vm_graphics_port'):
check = False
checker.add_error(_('Parameter vm_graphics_port does not exist.'))
else:
check = checker.check_number(
_('Graphics Port Number'),
obj.input.vm_graphics_port,
CHECK_EMPTY | CHECK_VALID | CHECK_MIN | CHECK_MAX,
GRAPHICS_PORT_MIN_NUMBER,
GRAPHICS_PORT_MAX_NUMBER,
) and check
if not is_param(obj.input, 'vm_mac'):
check = False
checker.add_error(_('Parameter vm_mac does not exist.'))
else:
check = checker.check_macaddr(
_('MAC Address'),
obj.input.vm_mac,
CHECK_EMPTY | CHECK_VALID,
) and check
obj.view.alert = checker.errors
return check
def validates_network_storage(obj):
checker = Checker()
check = True
_ = obj._
checker.errors = []
if is_param(obj.input, 'network_storage_host_name'):
check = checker.check_domainname(
_('Target Hostname'),
obj.input.network_storage_host_name,
CHECK_EMPTY | CHECK_VALID,
) and check
else:
check = False
checker.add_error(_('"%s" is required.') % _('Target Hostname'))
if is_param(obj.input, 'network_storage_port_number'):
check = checker.check_number(
_('Target Port Number'),
obj.input.network_storage_port_number,
CHECK_VALID | CHECK_MIN | CHECK_MAX,
PORT_MIN_NUMBER,
PORT_MAX_NUMBER,
) and check
if is_param(obj.input, 'network_storage_authentication'):
check = checker.check_empty(
_('iSCSI Authentication Type'),
obj.input.network_storage_authentication,
) and check
if obj.input.network_storage_authentication == ISCSI_CONFIG_VALUE_AUTH_METHOD_CHAP:
if is_param(obj.input, 'network_storage_user'):
check = checker.check_username_with_num(
_('iSCSI Authentication User'),
obj.input.network_storage_user,
CHECK_VALID | CHECK_LENGTH,
CHAP_USER_MIN_LENGTH,
CHAP_USER_MAX_LENGTH,
) and check
else:
check = False
checker.add_error(
_('"%s" is required.') % _('iSCSI Authentication User'))
if is_param(obj.input, 'network_storage_password'):
check = checker.check_password(
_('iSCSI Authentication Password'),
obj.input.network_storage_password,
obj.input.network_storage_password,
CHECK_LENGTH,
CHAP_PASSWORD_MIN_LENGTH,
CHAP_PASSWORD_MAX_LENGTH,
) and check
else:
check = False
checker.add_error(
_('"%s" is required.') %
_('iSCSI Authentication Password'))
else:
check = False
checker.add_error(
_('"%s" is required.') % _('iSCSI Authentication Type'))
obj.view.alert = checker.errors
return check
def validates_network(obj, network_name=None):
checker = Checker()
check = True
_ = obj._
checker.errors = []
if not network_name:
check = False
checker.add_error(_('Specify network name.'))
if not is_param(obj.input, 'cidr'):
check = False
checker.add_error(_('Specify bridge IP address for the network.'))
else:
check = checker.check_ipaddr(
_('Bridge IP Address/Netmask'),
obj.input.cidr,
CHECK_EMPTY | CHECK_VALID,
) and check
if not is_param(obj.input, 'bridge'):
check = False
checker.add_error(_('Specify bridge name to create for the network.'))
else:
check = checker.check_netdev_name(
_('Bridge Device Name'),
obj.input.bridge,
CHECK_EMPTY | CHECK_VALID,
) and check
A = is_param(obj.input, 'dhcp_start')
B = is_param(obj.input, 'dhcp_end')
#if not ( ((not A) and (not B)) or (A and B)):
if not (A and B):
check = False
checker.add_error(_('Specify both %s and %s') % (_('DHCP Start Address'), _('DHCP End Address')))
if is_param(obj.input, 'dhcp_start'):
check = checker.check_ipaddr(
_('DHCP Start Address'),
obj.input.dhcp_start,
CHECK_EMPTY | CHECK_ONLYSPACE | CHECK_VALID,
) and check
if is_param(obj.input, 'dhcp_end'):
check = checker.check_ipaddr(
_('DHCP End Address'),
obj.input.dhcp_end,
CHECK_EMPTY | CHECK_ONLYSPACE | CHECK_VALID,
) and check
check = checker.check_if_ips_are_in_network(
[ _('DHCP Start Address'), _('DHCP End Address'), _('Bridge IP Address/Netmask')],
[obj.input.dhcp_start, obj.input.dhcp_end],
obj.input.cidr,
CHECK_VALID | CHECK_UNIQUE) and check
check = checker.check_ip_range(
[ _('DHCP Start Address'), _('DHCP End Address'), _('Bridge IP Address/Netmask')],
[obj.input.dhcp_start, obj.input.dhcp_end, obj.input.cidr],
CHECK_VALID) and check
check = checker.check_virt_network_address_conflict(
_('Bridge IP Address/Netmask'),
obj.input.cidr,
[network_name], # names to ignore
CHECK_VALID) and check
if is_param(obj.input, 'forward_mode'):
check = checker.check_forward_mode(
_('Forward Mode'),
obj.input.forward_mode,
CHECK_VALID,
) and check
obj.view.alert = checker.errors
return check
def validates_graphics(obj):
checker = Checker()
check = True
_ = obj._
checker.errors = []
if not is_param(obj.input, 'port'):
check = False
checker.add_error(_('"%s" is required.') % _('Graphics Port Number'))
else:
check = checker.check_number(
_('Graphics Port Number'),
obj.input.port,
CHECK_EMPTY | CHECK_VALID | CHECK_MIN | CHECK_MAX,
min=GRAPHICS_PORT_MIN_NUMBER,
max=GRAPHICS_PORT_MAX_NUMBER,
) and check
if not is_param(obj.input, 'listen'):
check = False
checker.add_error(
_('"%s" is required.') % _('Graphics Listen Address'))
else:
check = checker.check_empty(_('Graphics Listen Address'),
obj.input.listen) and check
if check is True:
if not obj.input.listen in ["0.0.0.0", "127.0.0.1"]:
checker.add_error(
_('%s is in invalid format.') %
(_('Graphics Listen Address')))
check = False
else:
check = True
if not is_param(obj.input, 'change_passwd'):
check = False
checker.add_error(_('"%s" is required.') % _('Graphics Password'))
else:
check = checker.check_empty(_('Graphics Password'),
obj.input.change_passwd) and check
if check is True:
if not obj.input.change_passwd in ["random", "empty", "keep"]:
checker.add_error(
_('%s is in invalid format.') % (_('Graphics Password')))
check = False
else:
check = True
hypervisor = "KVM"
if obj.input.VMType == 'XEN':
hypervisor = "XEN"
elif obj.input.VMType == 'KVM':
hypervisor = "KVM"
if not is_param(obj.input, 'keymap'):
check = False
checker.add_error(_('"%s" is required.') % _('Graphics Keymap'))
else:
check = checker.check_keymap(_('Graphics Keymap'), obj.input.keymap,
CHECK_EMPTY | CHECK_EXIST,
hypervisor) and check
obj.view.alert = checker.errors
return check
def validates_watch(obj):
checker = Checker()
check = True
_ = obj._
checker.errors = []
if is_param(obj.input, 'watch_name'):
check = checker.check_string(_('Name'),
obj.input.watch_name,
CHECK_EMPTY | CHECK_ONLYSPACE,
None,
) and check
else:
check = False
checker.add_error(_('"%s" is required.') %_('Name'))
if is_param(obj.input, 'watch_target'):
check = checker.check_string(_('Watch Target'),
obj.input.watch_target,
CHECK_EMPTY | CHECK_ONLYSPACE,
None,
) and check
if obj.input.watch_target not in WATCH_PLUGINS.values():
check = False
# TRANSLATORS:
# %sは監視対象ではありません。
checker.add_error(_('"%s" is not watch target.') %_(obj.input.watch_target))
else:
check = False
checker.add_error(_('"%s" is required.') %_('Watch Target'))
if is_param(obj.input, 'continuation_count'):
check = checker.check_number(_('Alert Trigger Count'),
obj.input.continuation_count,
CHECK_EMPTY | CHECK_VALID | CHECK_MIN | CHECK_MAX,
CONTINUATION_COUNT_MIN,
CONTINUATION_COUNT_MAX,
) and check
else:
check = False
checker.add_error(_('"%s" is required.') %_('Alert Trigger Count'))
if is_param(obj.input, 'prohibition_period'):
check = checker.check_number(_('Silent Period'),
obj.input.prohibition_period,
CHECK_EMPTY | CHECK_VALID | CHECK_MIN | CHECK_MAX,
PROHIBITION_PERIOD_MIN,
PROHIBITION_PERIOD_MAX,
) and check
else:
check = False
checker.add_error(_('"%s" is required.') %_('Silent Period'))
if is_param(obj.input, 'threshold_fraction'):
fraction = int(obj.input.threshold_fraction)
else:
fraction = 0
if is_param(obj.input, 'threshold_val1'):
if fraction == 0:
check = checker.check_number(_('Threshold Value'),
obj.input.threshold_val1,
CHECK_EMPTY | CHECK_VALID | CHECK_MIN,
THRESHOLD_VAL_MIN,
None,
) and check
else:
check = checker.check_fraction(_('Threshold Value'),
obj.input.threshold_val1,
CHECK_EMPTY | CHECK_VALID | CHECK_MIN,
THRESHOLD_VAL_MIN,
None,
fraction,
) and check
else:
check = False
checker.add_error(_('"%s" is required.') %_('Threshold Value'))
if is_param(obj.input, 'threshold_val2'):
if fraction == 0:
check = checker.check_number(_('Threshold Value'),
obj.input.threshold_val2,
CHECK_EMPTY | CHECK_VALID | CHECK_MIN,
THRESHOLD_VAL_MIN,
None,
) and check
else:
check = checker.check_fraction(_('Threshold Value'),
obj.input.threshold_val2,
CHECK_EMPTY | CHECK_VALID | CHECK_MIN,
THRESHOLD_VAL_MIN,
None,
fraction,
) and check
else:
check = False
checker.add_error(_('"%s" is required.') %_('Threshold Value'))
if not is_param(obj.input, 'threshold_type'):
check = False
checker.add_error(_('"%s" is required.') %_('Threshold Type'))
if is_param(obj.input, 'notify_mail_to'):
if obj.input.notify_mail_to != "":
check = checker.check_mailaddress(_('Mail To'),
obj.input.notify_mail_to,
CHECK_LENGTH | CHECK_VALID,
EMAIL_MIN_LENGTH,
EMAIL_MAX_LENGTH,
) and check
if is_param(obj.input, 'notify_mail_from'):
if obj.input.notify_mail_from != "":
check = checker.check_mailaddress(_('Mail From'),
obj.input.notify_mail_from,
CHECK_LENGTH | CHECK_VALID,
EMAIL_MIN_LENGTH,
EMAIL_MAX_LENGTH,
) and check
obj.view.alert = checker.errors
return check
def validates_proxy(obj):
checker = Checker()
check = True
_ = obj._
checker.errors = []
if not is_param(obj.input, 'proxy_status'):
check = False
checker.add_error(_('"%s" is required.') % _('Proxy Settings'))
else:
if obj.input.proxy_status == PROXY_ENABLE:
if not is_param(obj.input, 'proxy_server'):
check = False
checker.add_error(_('"%s" is required.') % _('Proxy Server'))
else:
check = checker.check_domainname(
_('Proxy Server'),
obj.input.proxy_server,
CHECK_EMPTY | CHECK_VALID,
None,
None,
) and check
if not is_param(obj.input, 'proxy_port'):
check = False
checker.add_error(_('"%s" is required.') % _('Proxy Port Number'))
else:
check = checker.check_number(
_('Port Number'),
obj.input.proxy_port,
CHECK_EMPTY | CHECK_VALID | CHECK_MIN | CHECK_MAX,
PORT_MIN_NUMBER,
PORT_MAX_NUMBER,
) and check
if not is_param(obj.input, 'proxy_user'):
check = False
checker.add_error(_('"%s" is required.') % _('Proxy User Name'))
else:
check = checker.check_username(
_('Proxy User Name'),
obj.input.proxy_user,
CHECK_VALID | CHECK_ONLYSPACE,
None,
None,
) and check
if not is_param(obj.input, 'proxy_password'):
check = False
checker.add_error(_('"%s" is required.') % _('Proxy Password'))
else:
check = checker.check_password(
_('Proxy Password'),
obj.input.proxy_password,
obj.input.proxy_password,
CHECK_VALID,
) and check;
elif obj.input.proxy_status == PROXY_DISABLE:
check = True and check
else:
check = False
checker.add_error(_('"%s" is in invalid format.') % _('Proxy Status'))
obj.view.alert = checker.errors
return check